diff options
38 files changed, 496 insertions, 725 deletions
@@ -1,3 +1,9 @@ +- 1.1.1 + Updates to the new configuration system so it works more reliably + Removed a bunch of unused configuration variables + Removed a bunch of unused assembly code +- 1.1.0 + A whole bunch of random ppc and opteron work we never put a good label on - 1.1.0 Intial development release of LinuxBIOS. Everything is thrown overboard and will be reincluded as necessary so we can diff --git a/documentation/RFC/config.tex b/documentation/RFC/config.tex index 652e7bc467..d73f96db83 100644 --- a/documentation/RFC/config.tex +++ b/documentation/RFC/config.tex @@ -205,13 +205,11 @@ ldscript cpu/i386/entry32.lds ### Build our reset vector (This is where linuxBIOS is entered) ### if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript cpu/i386/reset16.lds -end - -if USE_NORMAL_IMAGE - mainboardinit cpu/i386/reset32.inc - ldscript cpu/i386/reset32.lds + mainboardinit cpu/i386/reset16.inc + ldscript cpu/i386/reset16.lds +else + mainboardinit cpu/i386/reset32.inc + ldscript cpu/i386/reset32.lds end . . @@ -229,13 +227,6 @@ makerule ./auto.inc dep "./romcc ./auto.E" act "./romcc -O ./auto.E > auto.inc" mainboardinit ./auto.inc # ### -### Setup RAM -### -mainboardinit ram/ramtest.inc -mainboardinit southbridge/amd/amd8111/smbus.inc -mainboardinit sdram/generic_dump_spd.inc -# -### ### Include the secondary Configuration files ### northbridge amd/amdk8 @@ -286,7 +277,7 @@ export ARCH:=i386 export _RAMBASE:=0x4000 export ROM_IMAGE_SIZE:=65535 export PAYLOAD_SIZE:=131073 -export MAX_CPUS:=1 +export CONFIG_MAX_CPUS:=1 export HEAP_SIZE:=8192 export STACK_SIZE:=8192 export MEMORY_HOLE:=0 diff --git a/src/arch/i386/boot/tables.c b/src/arch/i386/boot/tables.c index 1b840ff379..513167188c 100644 --- a/src/arch/i386/boot/tables.c +++ b/src/arch/i386/boot/tables.c @@ -20,7 +20,7 @@ static void remove_logical_cpus(unsigned long *processor_map) if (disable_logical_cpus) { /* disable logical cpus */ int cnt; - for(cnt=MAX_PHYSICAL_CPUS;cnt<MAX_CPUS;cnt++) + for(cnt=CONFIG_MAX_PHYSICAL_CPUS;cnt<CONFIG_MAX_CPUS;cnt++) processor_map[cnt]=0; printk_debug("logical cpus disabled\n"); } diff --git a/src/arch/i386/include/arch/smp/mpspec.h b/src/arch/i386/include/arch/smp/mpspec.h index 96b2ab3e6b..e780593df6 100644 --- a/src/arch/i386/include/arch/smp/mpspec.h +++ b/src/arch/i386/include/arch/smp/mpspec.h @@ -268,7 +268,7 @@ void *smp_write_floating_table(unsigned long addr); unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map); /* A table (per mainboard) listing the initial apicid of each cpu. */ -extern unsigned long initial_apicid[MAX_CPUS]; +extern unsigned long initial_apicid[CONFIG_MAX_CPUS]; #else /* HAVE_MP_TABLE */ static inline diff --git a/src/arch/i386/lib/c_start.S b/src/arch/i386/lib/c_start.S index 4c4146ec83..602fc51cbd 100644 --- a/src/arch/i386/lib/c_start.S +++ b/src/arch/i386/lib/c_start.S @@ -45,10 +45,10 @@ _start: movl APIC_ID(%edi), %eax shrl $24, %eax - /* Get the cpu index (MAX_CPUS on error) */ + /* Get the cpu index (CONFIG_MAX_CPUS on error) */ movl $-4, %ebx 1: addl $4, %ebx - cmpl $(MAX_CPUS << 2), %ebx + cmpl $(CONFIG_MAX_CPUS << 2), %ebx je 2 cmpl %eax, initial_apicid(%ebx) jne 1b diff --git a/src/arch/i386/smp/mpspec.c b/src/arch/i386/smp/mpspec.c index ff935bb996..d7b8c3e2f0 100644 --- a/src/arch/i386/smp/mpspec.c +++ b/src/arch/i386/smp/mpspec.c @@ -108,7 +108,7 @@ void smp_write_processors(struct mp_config_table *mc, cpuid(1, &eax, &ebx, &ecx, &edx); cpu_features = eax; cpu_feature_flags = edx; - for(i = 0; i < MAX_CPUS; i++) { + for(i = 0; i < CONFIG_MAX_CPUS; i++) { unsigned long cpu_apicid = initial_apicid[i]; unsigned long cpu_flag; if(initial_apicid[i]==-1) diff --git a/src/arch/i386/smp/secondary.S b/src/arch/i386/smp/secondary.S index 78c55764b0..c27d6282b0 100644 --- a/src/arch/i386/smp/secondary.S +++ b/src/arch/i386/smp/secondary.S @@ -48,10 +48,10 @@ _secondary_start: movl (APIC_ID + APIC_DEFAULT_BASE), %edi shrl $24, %edi - /* Get the cpu index (MAX_CPUS on error) */ + /* Get the cpu index (CONFIG_MAX_CPUS on error) */ movl $-4, %ebx 1: addl $4, %ebx - cmpl $(MAX_CPUS << 2), %ebx + cmpl $(CONFIG_MAX_CPUS << 2), %ebx je 2 cmpl %edi, initial_apicid(%ebx) jne 1b diff --git a/src/arch/i386/smp/start_stop.c b/src/arch/i386/smp/start_stop.c index bb8868a8d9..b40452403c 100644 --- a/src/arch/i386/smp/start_stop.c +++ b/src/arch/i386/smp/start_stop.c @@ -5,13 +5,6 @@ #include <string.h> #include <console/console.h> -#ifndef START_CPU_SEG -#define START_CPU_SEG 0x90000 -#endif -#if (START_CPU_SEG&0xffff) != 0 -#error START_CPU_SEG must be 64k aligned -#endif - static inline void hlt(void) { asm("hlt"); @@ -26,7 +19,7 @@ unsigned long this_processors_id(void) int processor_index(unsigned long apicid) { int i; - for(i = 0; i < MAX_CPUS; i++) { + for(i = 0; i < CONFIG_MAX_CPUS; i++) { if (initial_apicid[i] == apicid) { return i; } @@ -230,7 +223,7 @@ void startup_other_cpus(unsigned long *processor_map) int i; /* Assume the cpus are densly packed by apicid */ - for(i = 0; i < MAX_CPUS; i++) { + for(i = 0; i < CONFIG_MAX_CPUS; i++) { unsigned long cpu_apicid = initial_apicid[i]; if (cpu_apicid == -1) { printk_err("CPU %d not found\n",i); diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c index ff0909fd97..2bff70ce93 100644 --- a/src/boot/hardwaremain.c +++ b/src/boot/hardwaremain.c @@ -60,7 +60,7 @@ it with the version available from LANL. * info per processor at some point. I hope we don't need * anything more complex than an int. */ -static unsigned long processor_map[MAX_CPUS]; +static unsigned long processor_map[CONFIG_MAX_CPUS]; static struct mem_range *get_ramsize(void) { @@ -114,7 +114,7 @@ static void wait_for_other_cpus(void) } active_count = atomic_read(&active_cpus); } - for(i = 0; i < MAX_CPUS; i++) { + for(i = 0; i < CONFIG_MAX_CPUS; i++) { if (!(processor_map[i] & CPU_ENABLED)) { printk_err("CPU %d did not initialize!\n", i); processor_map[i] = 0; diff --git a/src/config/Options.lb b/src/config/Options.lb index edc19ee7a7..7cec869077 100644 --- a/src/config/Options.lb +++ b/src/config/Options.lb @@ -117,7 +117,7 @@ define OBJCOPY comment "Objcopy command" end define LINUXBIOS_VERSION - default "1.1.0" + default "1.1.1" export always comment "LinuxBIOS version" end @@ -148,7 +148,7 @@ define LINUXBIOS_COMPILE_HOST end define LINUXBIOS_COMPILE_DOMAIN - default "" + default "$(shell dnsdomainname)" export always comment "Build domain name" end @@ -183,16 +183,10 @@ define HAVE_FALLBACK_BOOT comment "Set if fallback booting required" end define USE_FALLBACK_IMAGE - default 0 + default 1 export used comment "Set to build a fallback image" end -define USE_NORMAL_IMAGE - format "%d" - default {!USE_FALLBACK_IMAGE} - export used - comment "Set to build a normal image" -end define FALLBACK_SIZE default 65536 format "0x%x" @@ -277,16 +271,16 @@ define CACHE_RAM_SIZE comment "Size of cache when using it for temporary RAM" end define XIP_ROM_BASE - default 0xffff8000 + default 0 format "0x%x" export used - comment "base address of range of ROM that can be cached to speed up linuxBIOS" + comment "Start address of area to cache during LinuxBIOS execution directly from ROM" end define XIP_ROM_SIZE - default 0x8000 + default 0 format "0x%x" export used - comment "size of range of ROM that can be cached to speed up linuxBIOS" + comment "Size of area to cache during LinuxBIOS execution directly from ROM" end define CONFIG_COMPRESS default 1 @@ -348,14 +342,8 @@ end define CONFIG_CONSOLE_SERIAL8250 default 0 export always - comment "Log messages to serial 8250 console" + comment "Log messages to 8250 uart based serial console" end -define SERIAL_CONSOLE - default none - export used - comment "Log messages to serial console" -end - define DEFAULT_CONSOLE_LOGLEVEL default 7 export always @@ -373,17 +361,25 @@ define NO_POST export always comment "Disable POST codes" end + +define TTYS0_BASE + default 0x3f8 + export always + comment "Base address for 8250 uart for the serial console" +end + define TTYS0_BAUD default 115200 export always comment "Default baud rate for serial console" end -define NO_KEYBOARD - default none - export never - comment "Set if we don't have a keyboard" -end +define TTYS0_LCS + default 0x3 + export always + comment "Default flow control settings for the 8250 serial console uart" +end + ############################################### # Mainboard options ############################################### @@ -403,11 +399,6 @@ define MAINBOARD_VENDOR export always comment "Vendor of mainboard" end -define FINAL_MAINBOARD_FIXUP - default 0 - export used - comment "Do final mainboard fixups" -end define CONFIG_SYS_CLK_FREQ default none export used @@ -426,22 +417,17 @@ end define CONFIG_MAX_CPUS default 1 export always - comment "Config CPU count for this machine" + comment "Maximum CPU count for this machine" end -define MAX_CPUS - default 1 +define CONFIG_MAX_PHYSICAL_CPUS + default {CONFIG_MAX_CPUS} export always - comment "CPU count for this machine" + comment "Physical CPU count for this machine" end define CONFIG_LOGICAL_CPUS - default 1 - export always - comment "Logical CPU count for this machine" -end -define MAX_PHYSICAL_CPUS - default 1 + default 0 export always - comment "Physical CPU count for this machine" + comment "Should multiple cpus per die be enabled?" end define HAVE_MP_TABLE default none @@ -453,11 +439,6 @@ end # Boot options ############################################### -define USE_ELF_BOOT - default none - export always - comment "Use ELF boot loader" -end define CONFIG_IDE_STREAM default 0 export always @@ -541,21 +522,6 @@ define SMBUS_MEM_DEVICE_INC end ############################################### -# SuperIO options -############################################### - -define SIO_BASE - default none - export used - comment "Superio base address" -end -define SIO_SYSTEM_CLK_INPUT - default none - export used - comment "Superio CLK input default" -end - -############################################### # Misc options ############################################### @@ -569,57 +535,30 @@ define MEMORY_HOLE export used comment "Set to deal with memory hole" end -define ENABLE_FIXED_AND_VARIABLE_MTRRS - default none - export used - comment "Enable fixed and variable mtrrs" -end -define START_CPU_SEG - default 0xf0000 - format "0x%x" - export always - comment "Start CPU segment" -end define MAX_REBOOT_CNT - default 2 + default 3 export always comment "Set maximum reboots" end -define DISABLE_WATCHDOG - default {MAXIMUM_CONSOLE_LOGLEVEL >= 8} - export used - comment "Disable watchdog if we're doing lots of output" -end -define ENABLE_IOMMU - default 1 - export used - comment "Enable IOMMU aperture" -end ############################################### # Misc device options ############################################### define CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 - default none + default 0 export used - comment "" + comment "Use timer2 to callibrate the x86 time stamp counter" end define INTEL_PPRO_MTRR default none export always comment "" end -define AMD8111_DEV - default 0x3800 - format "0x%x" - export used - comment "" -end define CONFIG_UDELAY_TSC default 0 export used - comment "" + comment "Implement udelay with the x86 time stamp counter" end ############################################### diff --git a/src/config/linuxbios_c.ld b/src/config/linuxbios_c.ld index 4340f1a135..c05a4c995e 100644 --- a/src/config/linuxbios_c.ld +++ b/src/config/linuxbios_c.ld @@ -87,7 +87,7 @@ SECTIONS _stack = .; .stack . : { /* Reserve a stack for each possible cpu, +1 extra */ - . = ((MAX_CPUS * STACK_SIZE) + STACK_SIZE) ; + . = ((CONFIG_MAX_CPUS * STACK_SIZE) + STACK_SIZE) ; } _estack = .; _heap = .; diff --git a/src/include/device/device.h b/src/include/device/device.h index d5013f15da..21e5dfc5c8 100644 --- a/src/include/device/device.h +++ b/src/include/device/device.h @@ -1,6 +1,7 @@ #ifndef DEVICE_H #define DEVICE_H +#include <stdint.h> #include <device/resource.h> struct device; diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb index 97634ab25a..b6d65b4cb5 100644 --- a/src/mainboard/amd/quartet/Config.lb +++ b/src/mainboard/amd/quartet/Config.lb @@ -1,8 +1,6 @@ uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE -uses ENABLE_IOMMU # # ### @@ -34,15 +32,11 @@ ldscript /cpu/i386/entry32.lds ### Build our reset vector (This is where linuxBIOS is entered) ### if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds else - print "NO FALLBACK USED!" -end - -if USE_NORMAL_IMAGE - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds end # #### Should this be in the northbridge code? @@ -76,15 +70,6 @@ end mainboardinit cpu/k8/earlymtrr.inc # # -### -### Only the bootstrap cpu makes it here. -### Failover if we need to -### -# -if USE_FALLBACK_IMAGE - mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc -end -# #### #### O.k. We aren't just an intermediary anymore! #### @@ -94,10 +79,6 @@ end ### ##option MAXIMUM_CONSOLE_LOGLEVEL=7 #default MAXIMUM_CONSOLE_LOGLEVEL=7 -#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) -#if DISABLE_WATCHDOG -# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc -#end # if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end # @@ -118,13 +99,6 @@ end mainboardinit ./auto.inc # ### -### Setup RAM -### -mainboardinit ram/ramtest.inc -mainboardinit southbridge/amd/amd8111/smbus.inc -mainboardinit sdram/generic_dump_spd.inc -# -### ### Include the secondary Configuration files ### northbridge amd/amdk8 @@ -142,4 +116,3 @@ cpu p6 end cpu k7 end cpu k8 end -option ENABLE_IOMMU=1 diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c index a347f20b70..3166f7ad3c 100644 --- a/src/mainboard/amd/quartet/auto.c +++ b/src/mainboard/amd/quartet/auto.c @@ -17,6 +17,8 @@ #include "northbridge/amd/amdk8/reset_test.c" #include "debug.c" +#define SIO_BASE 0x2e + static void memreset_setup(void) { /* Set the memreset low */ diff --git a/src/mainboard/amd/quartet/mainboard.c b/src/mainboard/amd/quartet/mainboard.c index d93d2ed1d9..0622150d64 100644 --- a/src/mainboard/amd/quartet/mainboard.c +++ b/src/mainboard/amd/quartet/mainboard.c @@ -5,7 +5,7 @@ #include <device/pci_ops.h> -unsigned long initial_apicid[MAX_CPUS] = +unsigned long initial_apicid[CONFIG_MAX_CPUS] = { 0, 1, 2, 3 }; diff --git a/src/mainboard/amd/solo/Config.lb b/src/mainboard/amd/solo/Config.lb index f237a5cbea..12c59fdb38 100644 --- a/src/mainboard/amd/solo/Config.lb +++ b/src/mainboard/amd/solo/Config.lb @@ -24,8 +24,6 @@ default CONFIG_UDELAY_TSC=0 ### ### Customize our winbond superio chip for this motherboard ### -option SIO_BASE=0x2e -option SIO_SYSTEM_CLK_INPUT=0 option CONFIG_CONSOLE_SERIAL8250=0 # ### @@ -51,16 +49,11 @@ option IRQ_SLOT_COUNT=7 ##option HAVE_MP_TABLE=1 # ### -### Do not build special code for the keyboard -### -default NO_KEYBOARD=1 -# -### ### Build code for SMP support ### Only worry about 2 micro processors ### ##option CONFIG_SMP=1 -option MAX_CPUS=1 +option CONFIG_MAX_CPUS=1 # ### ### Build code to setup a generic IOAPIC @@ -79,37 +72,17 @@ option CONFIG_IOAPIC=1 option MEMORY_HOLE=0 # ### -### Enable both fixed and variable MTRRS -### When we setup MTRRs in mtrr.c -### -### We must setup the fixed mtrrs or we confuse SMP secondary -### processor identification -### -option ENABLE_FIXED_AND_VARIABLE_MTRRS=1 -# -### ### Clean up the motherboard id strings ### option MAINBOARD_PART_NUMBER="Solo7" option MAINBOARD_VENDOR="AMD" # ### -### Let Assembly code know where on the pci bus the AMD southbridge is -### -option AMD8111_DEV=0x3800 -# -### -### Call the final_mainboard_fixup function -### -option FINAL_MAINBOARD_FIXUP=1 -# -### ### Figure out which type of linuxBIOS image to build ### If we aren't a fallback image we must be a normal image ### This is useful for optional includes ### default USE_FALLBACK_IMAGE=0 -option USE_NORMAL_IMAGE=(! USE_FALLBACK_IMAGE) # #### #### LinuxBIOS layout values @@ -144,8 +117,7 @@ default FALLBACK_SIZE=65536 if USE_FALLBACK_IMAGE option ROM_SECTION_SIZE = FALLBACK_SIZE option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE) -end -if USE_NORMAL_IMAGE +else option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) option ROM_SECTION_OFFSET= 0 end @@ -177,13 +149,6 @@ option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) ##option XIP_ROM_BASE=0xffff8000 # ### -### Compute where the SMP startup code needs to live -### FIXME I don't see how to make this work for the normal image.... -### -option START_CPU_SEG=0xf0000 -# -# -### ### Set all of the defaults for an x86 architecture ### # @@ -217,13 +182,11 @@ ldscript /cpu/i386/entry32.lds ### Build our reset vector (This is where linuxBIOS is entered) ### if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds -end - -if USE_NORMAL_IMAGE - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds +else + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds end # #### Should this be in the northbridge code? @@ -251,15 +214,6 @@ end mainboardinit cpu/k8/earlymtrr.inc # # -### -### Only the bootstrap cpu makes it here. -### Failover if we need to -### -# -if USE_FALLBACK_IMAGE - mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc -end -# #### #### O.k. We aren't just an intermediary anymore! #### @@ -269,10 +223,6 @@ end ### ##option MAXIMUM_CONSOLE_LOGLEVEL=7 #default MAXIMUM_CONSOLE_LOGLEVEL=7 -#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) -#if DISABLE_WATCHDOG -# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc -#end # ### ### Setup the serial port @@ -293,13 +243,6 @@ makerule ./auto.inc dep "./romcc ./auto.E" act "./romcc -O ./auto.E > auto.inc" mainboardinit ./auto.inc # ### -### Setup RAM -### -mainboardinit ram/ramtest.inc -mainboardinit southbridge/amd/amd8111/smbus.inc -mainboardinit sdram/generic_dump_spd.inc -# -### ### Include the secondary Configuration files ### northbridge amd/amdk8 diff --git a/src/mainboard/amd/solo/mainboard.c b/src/mainboard/amd/solo/mainboard.c index 5690bd5afd..75a77d6adb 100644 --- a/src/mainboard/amd/solo/mainboard.c +++ b/src/mainboard/amd/solo/mainboard.c @@ -5,7 +5,7 @@ #include <device/pci_ops.h> -unsigned long initial_apicid[MAX_CPUS] = +unsigned long initial_apicid[CONFIG_MAX_CPUS] = { 0 }; diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb index db31552135..4947698590 100644 --- a/src/mainboard/arima/hdama/Config.lb +++ b/src/mainboard/arima/hdama/Config.lb @@ -1,168 +1,286 @@ uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE -uses AMD8111_DEV uses MAINBOARD uses ARCH -uses ENABLE_IOMMU -# -# +uses FALLBACK_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_STREAM_START +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE + ### -### Set all of the defaults for an x86 architecture +### Build options ### -# -# + +## +## Build code for the fallback boot +## +option HAVE_FALLBACK_BOOT=1 + +## +## Build code to reset the motherboard from linuxBIOS +## +option HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +option HAVE_PIRQ_TABLE=1 +option IRQ_SLOT_COUNT=7 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +option HAVE_MP_TABLE=1 + +## +## Build code to export a CMOS option table +## +option HAVE_OPTION_TABLE=1 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +option CONFIG_SMP=1 +option CONFIG_MAX_CPUS=2 + +## +## Build code to setup a generic IOAPIC +## +option CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +option MAINBOARD_PART_NUMBER="HDAMA" +option MAINBOARD_VENDOR="ARIMA" + ### -### Build the objects we have code for in this directory. +### LinuxBIOS layout values ### -##object mainboard.o + +## ROM_SIZE is the size of boot ROM that this board will use. +option ROM_SIZE = 524288 + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +option ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +option STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +option HEAP_SIZE=0x4000 + +## +## Only use the option table in a normal image +## +option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE + +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus bootloader) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE + option ROM_SECTION_SIZE = FALLBACK_SIZE + option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + option ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + option ROM_SECTION_OFFSET = 0 +end + +## +## Compute the start location and size size of +## The linuxBIOS bootloader. +## +option PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +option CONFIG_ROM_STREAM = 1 + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +option _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +option XIP_ROM_SIZE=65536 +option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) + +## +## Set all of the defaults for an x86 architecture +## + +arch i386 end +#cpu k8 end + +## +## Build the objects we have code for in this directory. +## + +#object mainboard.o driver mainboard.o -object static_devices.o +#object static_devices.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -# -arch i386 end -#cpu k8 end -# -### -### Build our 16 bit and 32 bit linuxBIOS entry code -### +object reset.o + +## +## Romcc output +## +makerule ./failover.E + depends "$(MAINBOARD)/failover.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" +end + +makerule ./failover.inc + depends "./failover.E ./romcc" + action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" +end + +makerule ./auto.E + depends "$(MAINBOARD)/auto.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" +end +makerule ./auto.inc + depends "./auto.E ./romcc" + action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" +end + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## mainboardinit cpu/i386/entry16.inc mainboardinit cpu/i386/entry32.inc ldscript /cpu/i386/entry16.lds ldscript /cpu/i386/entry32.lds -# -### -### Build our reset vector (This is where linuxBIOS is entered) -### + +## +## Build our reset vector (This is where linuxBIOS is entered) +## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds else - print "NO FALLBACK USED!" + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds end -if USE_NORMAL_IMAGE - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds -end -# -#### Should this be in the northbridge code? +### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc -# -### -### Include an id string (For safe flashing) -### + +## +## Include an id string (For safe flashing) +## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -# -#### -#### This is the early phase of linuxBIOS startup -#### Things are delicate and we test to see if we should -#### failover to another image. -#### -#option MAX_REBOOT_CNT=2 -if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds -end -# -### -### Setup our mtrrs -### + +## +## Setup our mtrrs +## mainboardinit cpu/k8/earlymtrr.inc + ### -### Only the bootstrap cpu makes it here. -### Failover if we need to +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. ### -# if USE_FALLBACK_IMAGE - mainboardinit ./failover.inc -# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc end -# -# -### -### Setup the serial port -### -#mainboardinit superiowinbond/w83627hf/setup_serial.inc -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc -# -#### -#### O.k. We aren't just an intermediary anymore! -#### -# -### -### When debugging disable the watchdog timer ### -##option MAXIMUM_CONSOLE_LOGLEVEL=7 -#default MAXIMUM_CONSOLE_LOGLEVEL=7 -#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) -#if DISABLE_WATCHDOG -# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc -#end -# -#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end -# +### O.k. We aren't just an intermediary anymore! ### -### Romcc output -### -#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E" -#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc" -#mainboardinit .failover.inc - -makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" -end -makerule ./failover.inc - depends "./romcc ./failover.E" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" -end -makerule ./auto.inc - depends "./romcc ./auto.E" - action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" -end +## +## Setup RAM +## mainboardinit cpu/k8/enable_mmx_sse.inc mainboardinit ./auto.inc mainboardinit cpu/k8/disable_mmx_sse.inc -# -### -### Setup RAM -### -#mainboardinit ram/ramtest.inc -#mainboardinit southbridge/amd/amd8111/smbus.inc -#mainboardinit sdram/generic_dump_spd.inc -# -### -### Include the secondary Configuration files -### -northbridge amd/amdk8 -end -southbridge amd/amd8111 "amd8111" -end -southbridge amd/amd8131 "amd8131" + +## +## Include the secondary Configuration files +## +dir /pc80 + +northbridge amd/amdk8 "mc0" + #pci 0:18.0 + #pci 0:18.0 + #pci 0:18.0 + #pci 0:18.1 + #pci 0:18.2 + #pci 0:18.3 + southbridge amd/amd8131 "amd8131" + #pci 0:0.0 + #pci 0:0.1 + #pci 0:1.0 + #pci 0:1.1 + end + southbridge amd/amd8111 "amd8111" + #pci 0:0.0 + #pci 0:1.0 + #pci 0:1.1 + #pci 0:1.2 + #pci 0:1.3 + #pci 0:1.5 off + #pci 0:1.6 off + superio NSC/pc87360 + #pnp 1:2e.0 + #pnp 1:2e.1 + #pnp 1:2e.2 + #pnp 1:2e.3 + #pnp 1:2e.4 + #pnp 1:2e.5 + #pnp 1:2e.6 + #pnp 1:2e.7 + #pnp 1:2e.8 + #pnp 1:2e.9 + #pnp 1:2e.a + register "com1" = "{1, 0, 0x3f8, 4}" + register "lpt" = "{1}" + end + end end -#mainboardinit archi386/smp/secondary.inc -superio NSC/pc87360 - register "com1" = "{1}" - register "lpt" = "{1}" + +northbridge amd/amdk8 "mc1" + #pci 0:19.0 + #pci 0:19.0 + #pci 0:19.0 + #pci 0:19.1 + #pci 0:19.2 + #pci 0:19.3 end -dir /pc80 -##dir /src/superio/winbond/w83627hf -#dir /cpu/k8 -cpu k8 "cpu0" - register "up" = "{.chip = &amd8111, .ht_width=8, .ht_speed=200}" + +cpu k8 "cpu0" + register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }" end cpu k8 "cpu1" end -option ENABLE_IOMMU=1 +## +## Include the old serial code for those few places that still need it. +## +mainboardinit pc80/serial.inc +mainboardinit arch/i386/lib/console.inc + diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c index ca19245293..f977496a7b 100644 --- a/src/mainboard/arima/hdama/auto.c +++ b/src/mainboard/arima/hdama/auto.c @@ -1,6 +1,4 @@ #define ASSEMBLY 1 -#define MAXIMUM_CONSOLE_LOGLEVEL 9 -#define DEFAULT_CONSOLE_LOGLEVEL 9 #include <stdint.h> #include <device/pci_def.h> @@ -20,6 +18,8 @@ #include "northbridge/amd/amdk8/reset_test.c" #include "debug.c" +#define SIO_BASE 0x2e + static void memreset_setup(void) { /* Set the memreset low */ @@ -151,7 +151,7 @@ static void pc87360_enable_serial(void) } #define FIRST_CPU 1 -#define SECOND_CPU 0 +#define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) static void main(void) { @@ -209,7 +209,7 @@ static void main(void) memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); -#if 1 +#if 0 dump_pci_devices(); #endif #if 0 @@ -227,13 +227,21 @@ static void main(void) #endif #if 0 ram_check(0x00000000, msr.lo); -#else -#if TOTAL_CPUS < 2 - /* Check 16MB of memory @ 0*/ - ram_check(0x00000000, 0x01000); -#else - /* Check 16MB of memory @ 2GB */ - ram_check(0x80000000, 0x81000000); #endif +#if 0 + static const struct { + unsigned long lo, hi; + } check_addrs[] = { + /* Check 16MB of memory @ 0*/ + { 0x00000000, 0x01000000 }, +#if TOTAL_CPUS > 1 + /* Check 16MB of memory @ 2GB */ + { 0x80000000, 0x81000000 }, +#endif + }; + int i; + for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) { + ram_check(check_addrs[i].lo, check_addrs[i].hi); + } #endif } diff --git a/src/mainboard/arima/hdama/mainboard.c b/src/mainboard/arima/hdama/mainboard.c index 61092b799b..4f40e393b2 100644 --- a/src/mainboard/arima/hdama/mainboard.c +++ b/src/mainboard/arima/hdama/mainboard.c @@ -9,7 +9,7 @@ #include "chip.h" -unsigned long initial_apicid[MAX_CPUS] = +unsigned long initial_apicid[CONFIG_MAX_CPUS] = { 0, 1, }; diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb index db31552135..2050b01367 100644 --- a/src/mainboard/newisys/khepri/Config.lb +++ b/src/mainboard/newisys/khepri/Config.lb @@ -1,11 +1,8 @@ uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE -uses AMD8111_DEV uses MAINBOARD uses ARCH -uses ENABLE_IOMMU # # ### @@ -37,15 +34,11 @@ ldscript /cpu/i386/entry32.lds ### Build our reset vector (This is where linuxBIOS is entered) ### if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds else - print "NO FALLBACK USED!" -end - -if USE_NORMAL_IMAGE - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds end # #### Should this be in the northbridge code? @@ -78,7 +71,6 @@ mainboardinit cpu/k8/earlymtrr.inc # if USE_FALLBACK_IMAGE mainboardinit ./failover.inc -# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc end # @@ -99,10 +91,6 @@ mainboardinit arch/i386/lib/console.inc ### ##option MAXIMUM_CONSOLE_LOGLEVEL=7 #default MAXIMUM_CONSOLE_LOGLEVEL=7 -#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) -#if DISABLE_WATCHDOG -# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc -#end # #if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end # @@ -135,13 +123,6 @@ mainboardinit ./auto.inc mainboardinit cpu/k8/disable_mmx_sse.inc # ### -### Setup RAM -### -#mainboardinit ram/ramtest.inc -#mainboardinit southbridge/amd/amd8111/smbus.inc -#mainboardinit sdram/generic_dump_spd.inc -# -### ### Include the secondary Configuration files ### northbridge amd/amdk8 @@ -165,4 +146,3 @@ end cpu k8 "cpu1" end -option ENABLE_IOMMU=1 diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c index ca19245293..29da7aa5e3 100644 --- a/src/mainboard/newisys/khepri/auto.c +++ b/src/mainboard/newisys/khepri/auto.c @@ -20,6 +20,8 @@ #include "northbridge/amd/amdk8/reset_test.c" #include "debug.c" +#define SIO_BASE 0x2e + static void memreset_setup(void) { /* Set the memreset low */ diff --git a/src/mainboard/newisys/khepri/mainboard.c b/src/mainboard/newisys/khepri/mainboard.c index 9e5c0acc89..88c5977cbb 100644 --- a/src/mainboard/newisys/khepri/mainboard.c +++ b/src/mainboard/newisys/khepri/mainboard.c @@ -9,7 +9,7 @@ #include "chip.h" -unsigned long initial_apicid[MAX_CPUS] = +unsigned long initial_apicid[CONFIG_MAX_CPUS] = { 0, 1, }; diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index 9c9953e927..1661015535 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -1,11 +1,8 @@ uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE -uses AMD8111_DEV uses MAINBOARD uses ARCH -uses ENABLE_IOMMU # # ### @@ -46,15 +43,11 @@ ldscript /cpu/i386/entry32.lds ### Build our reset vector (This is where linuxBIOS is entered) ### if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds else -# print "NO FALLBACK USED!" -end - -if USE_NORMAL_IMAGE - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds end # #### Should this be in the northbridge code? @@ -87,7 +80,6 @@ mainboardinit cpu/k8/earlymtrr.inc # if USE_FALLBACK_IMAGE mainboardinit ./failover.inc -# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc end # @@ -108,10 +100,6 @@ mainboardinit arch/i386/lib/console.inc ### ##option MAXIMUM_CONSOLE_LOGLEVEL=7 #default MAXIMUM_CONSOLE_LOGLEVEL=7 -#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) -#if DISABLE_WATCHDOG -# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc -#end # #if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end # @@ -145,13 +133,6 @@ mainboardinit ./auto.inc mainboardinit cpu/k8/disable_mmx_sse.inc # ### -### Setup RAM -### -#mainboardinit ram/ramtest.inc -#mainboardinit southbridge/amd/amd8111/smbus.inc -#mainboardinit sdram/generic_dump_spd.inc -# -### ### Include the secondary Configuration files ### northbridge amd/amdk8 @@ -175,5 +156,3 @@ end cpu k8 "cpu1" end - -option ENABLE_IOMMU=1 diff --git a/src/mainboard/tyan/s2880/mainboard.c b/src/mainboard/tyan/s2880/mainboard.c index 8efc0a5d1b..f6daa781eb 100644 --- a/src/mainboard/tyan/s2880/mainboard.c +++ b/src/mainboard/tyan/s2880/mainboard.c @@ -7,7 +7,7 @@ #include "chip.h" //#include <part/mainboard.h> //#include "lsi_scsi.c" -unsigned long initial_apicid[MAX_CPUS] = +unsigned long initial_apicid[CONFIG_MAX_CPUS] = { 0,1 }; diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index 8297ecff7d..013e968656 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -1,11 +1,8 @@ uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE -uses AMD8111_DEV uses MAINBOARD uses ARCH -uses ENABLE_IOMMU # # ### @@ -45,15 +42,11 @@ ldscript /cpu/i386/entry32.lds ### Build our reset vector (This is where linuxBIOS is entered) ### if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds else -# print "NO FALLBACK USED!" -end - -if USE_NORMAL_IMAGE - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds end # #### Should this be in the northbridge code? @@ -86,7 +79,6 @@ mainboardinit cpu/k8/earlymtrr.inc # if USE_FALLBACK_IMAGE mainboardinit ./failover.inc -# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc end # @@ -107,10 +99,6 @@ mainboardinit arch/i386/lib/console.inc ### ##option MAXIMUM_CONSOLE_LOGLEVEL=7 #default MAXIMUM_CONSOLE_LOGLEVEL=7 -#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) -#if DISABLE_WATCHDOG -# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc -#end # #if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end # @@ -144,13 +132,6 @@ mainboardinit ./auto.inc mainboardinit cpu/k8/disable_mmx_sse.inc # ### -### Setup RAM -### -#mainboardinit ram/ramtest.inc -#mainboardinit southbridge/amd/amd8111/smbus.inc -#mainboardinit sdram/generic_dump_spd.inc -# -### ### Include the secondary Configuration files ### northbridge amd/amdk8 @@ -174,5 +155,3 @@ end cpu k8 "cpu1" end - -option ENABLE_IOMMU=1 diff --git a/src/mainboard/tyan/s2882/mainboard.c b/src/mainboard/tyan/s2882/mainboard.c index 0862c87ac0..d9acaf2384 100644 --- a/src/mainboard/tyan/s2882/mainboard.c +++ b/src/mainboard/tyan/s2882/mainboard.c @@ -7,7 +7,7 @@ #include "chip.h" //#include <part/mainboard.h> //#include "lsi_scsi.c" -unsigned long initial_apicid[MAX_CPUS] = +unsigned long initial_apicid[CONFIG_MAX_CPUS] = { 0,1 }; diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index 81a72f728f..f3f3081591 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -1,11 +1,8 @@ uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE -uses AMD8111_DEV uses MAINBOARD uses ARCH -uses ENABLE_IOMMU # # ### @@ -46,15 +43,11 @@ ldscript /cpu/i386/entry32.lds ### Build our reset vector (This is where linuxBIOS is entered) ### if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds else -# print "NO FALLBACK USED!" -end - -if USE_NORMAL_IMAGE - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds end # #### Should this be in the northbridge code? @@ -87,7 +80,6 @@ mainboardinit cpu/k8/earlymtrr.inc # if USE_FALLBACK_IMAGE mainboardinit ./failover.inc -# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc end # @@ -108,10 +100,6 @@ mainboardinit arch/i386/lib/console.inc ### ##option MAXIMUM_CONSOLE_LOGLEVEL=7 #default MAXIMUM_CONSOLE_LOGLEVEL=7 -#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) -#if DISABLE_WATCHDOG -# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc -#end # #if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end # @@ -145,13 +133,6 @@ mainboardinit ./auto.inc mainboardinit cpu/k8/disable_mmx_sse.inc # ### -### Setup RAM -### -#mainboardinit ram/ramtest.inc -#mainboardinit southbridge/amd/amd8111/smbus.inc -#mainboardinit sdram/generic_dump_spd.inc -# -### ### Include the secondary Configuration files ### northbridge amd/amdk8 @@ -178,5 +159,3 @@ end cpu k8 "cpu1" end -option ENABLE_IOMMU=0 - diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c index af8c1ad479..524cb80ab2 100644 --- a/src/mainboard/tyan/s2885/mainboard.c +++ b/src/mainboard/tyan/s2885/mainboard.c @@ -7,7 +7,7 @@ #include "chip.h" //#include <part/mainboard.h> //#include "lsi_scsi.c" -unsigned long initial_apicid[MAX_CPUS] = +unsigned long initial_apicid[CONFIG_MAX_CPUS] = { 0,1 }; diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index baf3781bf5..5eb127c402 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -157,7 +157,7 @@ static void enable_routing(u8 node) print_debug(" done.\r\n"); } -#if MAX_CPUS > 1 +#if CONFIG_MAX_CPUS > 1 static void rename_temp_node(u8 node) { @@ -290,7 +290,7 @@ static void setup_remote_node(u8 node, u8 cpus) #endif -#if MAX_CPUS > 2 +#if CONFIG_MAX_CPUS > 2 static void setup_temp_node(u8 node, u8 cpus) { u8 row; @@ -306,7 +306,7 @@ static u8 setup_uniprocessor(void) return 1; } -#if MAX_CPUS > 1 +#if CONFIG_MAX_CPUS > 1 static u8 setup_smp(void) { u8 cpus=2; @@ -332,7 +332,7 @@ static u8 setup_smp(void) clear_temp_row(0); /* delete temporary connection */ -#if MAX_CPUS > 2 +#if CONFIG_MAX_CPUS > 2 cpus=4; /* Setup and check temporary connection from Node 0 to Node 2 */ @@ -386,7 +386,7 @@ static u8 setup_smp(void) } #endif -#if MAX_CPUS > 1 +#if CONFIG_MAX_CPUS > 1 static unsigned detect_mp_capabilities(unsigned cpus) { unsigned node, row, mask; @@ -479,7 +479,7 @@ static int setup_coherent_ht_domain(void) enable_bsp_routing(); -#if MAX_CPUS == 1 +#if CONFIG_MAX_CPUS == 1 cpus=setup_uniprocessor(); #else cpus=setup_smp(); diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c index 99318aa3f7..802e4318b4 100644 --- a/src/northbridge/amd/amdk8/raminit.c +++ b/src/northbridge/amd/amdk8/raminit.c @@ -1,6 +1,8 @@ #include <cpu/k8/mtrr.h> #include "raminit.h" +#define ENABLE_IOMMU 1 + /* Function 2 */ #define DRAM_CSBASE 0x40 #define DRAM_CSMASK 0x60 diff --git a/targets/arima/hdama/Config.lb b/targets/arima/hdama/Config.lb index 542802b8a7..f9941f5ceb 100644 --- a/targets/arima/hdama/Config.lb +++ b/targets/arima/hdama/Config.lb @@ -6,31 +6,29 @@ loadoptions target hdama -uses AMD8111_DEV uses ARCH uses CONFIG_COMPRESS uses CONFIG_IOAPIC uses CONFIG_ROM_STREAM uses CONFIG_ROM_STREAM_START -uses CONFIG_SMP uses CONFIG_UDELAY_TSC uses CPU_FIXUP -uses ENABLE_FIXED_AND_VARIABLE_MTRRS uses FALLBACK_SIZE -uses FINAL_MAINBOARD_FIXUP uses HAVE_FALLBACK_BOOT uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE +uses HAVE_HARD_RESET uses i586 uses i686 uses INTEL_PPRO_MTRR -uses IRQ_SLOT_COUNT uses HEAP_SIZE +uses IRQ_SLOT_COUNT uses k7 uses k8 uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR -uses MAX_CPUS +uses CONFIG_SMP +uses CONFIG_MAX_CPUS uses MEMORY_HOLE uses PAYLOAD_SIZE uses _RAMBASE @@ -39,12 +37,8 @@ uses ROM_IMAGE_SIZE uses ROM_SECTION_OFFSET uses ROM_SECTION_SIZE uses ROM_SIZE -uses SIO_BASE -uses SIO_SYSTEM_CLK_INPUT uses STACK_SIZE -uses USE_ELF_BOOT uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE uses USE_OPTION_TABLE uses HAVE_OPTION_TABLE uses MAXIMUM_CONSOLE_LOGLEVEL @@ -52,15 +46,16 @@ uses DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_CONSOLE_SERIAL8250 uses MAINBOARD uses CONFIG_CHIP_CONFIGURE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses LINUXBIOS_EXTRA_VERSION option CONFIG_CHIP_CONFIGURE=1 -option MAXIMUM_CONSOLE_LOGLEVEL=7 -option DEFAULT_CONSOLE_LOGLEVEL=7 +option MAXIMUM_CONSOLE_LOGLEVEL=8 +option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option HAVE_OPTION_TABLE=1 -option HAVE_MP_TABLE=1 option CPU_FIXUP=1 option CONFIG_UDELAY_TSC=0 option i686=1 @@ -68,95 +63,22 @@ option i586=1 option INTEL_PPRO_MTRR=1 option k7=1 option k8=1 -option ROM_SIZE=0x100000 -### Customize our winbond superio chip for this motherboard -### -option SIO_BASE=0x2e -option SIO_SYSTEM_CLK_INPUT=0 -# -### -### Build code to export a programmable irq routing table -### -option HAVE_PIRQ_TABLE=1 -option IRQ_SLOT_COUNT=18 -# -### -### Build code for SMP support -### Only worry about 2 micro processors -### -option CONFIG_SMP=1 -option MAX_CPUS=2 -# -### -### Build code to setup a generic IOAPIC -### -option CONFIG_IOAPIC=1 -# -### -### MEMORY_HOLE instructs earlymtrr.inc to -### enable caching from 0-640KB and to disable -### caching from 640KB-1MB using fixed MTRRs -### -### Enabling this option breaks SMP because secondary -### CPU identification depends on only variable MTRRs -### being enabled. -### -option MEMORY_HOLE=0 -# -### -### Enable both fixed and variable MTRRS -### When we setup MTRRs in mtrr.c -### -### We must setup the fixed mtrrs or we confuse SMP secondary -### processor identification -### -option ENABLE_FIXED_AND_VARIABLE_MTRRS=1 +option ROM_SIZE=524288 -### -### Call the final_mainboard_fixup function -### -option FINAL_MAINBOARD_FIXUP=1 + +option HAVE_OPTION_TABLE=1 +option CONFIG_ROM_STREAM=1 +option HAVE_FALLBACK_BOOT=1 ### ### Compute the location and size of where this firmware image ### (linuxBIOS plus bootloader) will live in the boot rom chip. ### -option FALLBACK_SIZE=0x100000 -### -### Compute where this copy of linuxBIOS will start in the boot rom -### -# -### -### Compute a range of ROM that can cached to speed up linuxBIOS, -### execution speed. -### -##expr XIP_ROM_SIZE = 65536 -##expr XIP_ROM_BASE = _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE -##option XIP_ROM_SIZE=65536 -##option XIP_ROM_BASE=0xffff0000 -# -## XIP_ROM_SIZE && XIP_ROM_BASE values that work. -##option XIP_ROM_SIZE=0x8000 -##option XIP_ROM_BASE=0xffff8000 - -## We don't use compressed image -option CONFIG_COMPRESS=1 - -option USE_ELF_BOOT=1 +option FALLBACK_SIZE=131072 ## LinuxBIOS C code runs at this location in RAM -option _RAMBASE=0x4000 - -## -## Use a 64K stack -## -option STACK_SIZE=0x10000 - -## -## Use a 64K heap -## -option HEAP_SIZE=0x10000 +option _RAMBASE=0x00004000 # ### @@ -166,32 +88,20 @@ option HEAP_SIZE=0x10000 # # Arima hdama -#romimage "normal" -# option USE_FALLBACK_IMAGE=0 -# option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) -# option ROM_SECTION_OFFSET= 0 -# option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) -# option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -# option CONFIG_ROM_STREAM = 1 -# option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) -# mainboard arima/hdama -# payload ../eepro100.ebi -#end +romimage "normal" + option USE_FALLBACK_IMAGE=0 + option ROM_IMAGE_SIZE=0x10000 + option LINUXBIOS_EXTRA_VERSION=".0Normal" + mainboard arima/hdama + payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf +end romimage "fallback" - option ROM_IMAGE_SIZE=0x10000 -# option ROM_IMAGE_SIZE=120*1024 option USE_FALLBACK_IMAGE=1 - option HAVE_FALLBACK_BOOT=1 - option ROM_SECTION_SIZE = FALLBACK_SIZE - option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE) - option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) - option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - option CONFIG_ROM_STREAM = 1 - option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) + option ROM_IMAGE_SIZE=0x10000 + option LINUXBIOS_EXTRA_VERSION=".0Fallback" mainboard arima/hdama - payload ../../../../tg3--ide_disk.zelf -# payload ../../../../opteron_phase1_p4_noapic + payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf end buildrom ROM_SIZE "normal" "fallback" diff --git a/targets/embeddedplanet/ep405pc/Config.lb b/targets/embeddedplanet/ep405pc/Config.lb index 5ee911b92b..404edebe02 100644 --- a/targets/embeddedplanet/ep405pc/Config.lb +++ b/targets/embeddedplanet/ep405pc/Config.lb @@ -15,7 +15,6 @@ uses NO_POST uses CONFIG_IDE_STREAM uses CONFIG_SYS_CLK_FREQ uses IDE_BOOT_DRIVE -uses USE_ELF_BOOT uses IDE_SWAB IDE_OFFSET uses ROM_SIZE ROM_IMAGE_SIZE uses ROM_SECTION_SIZE @@ -48,7 +47,6 @@ option NO_POST=1 ## Boot linux from IDE option CONFIG_IDE_STREAM=1 option IDE_BOOT_DRIVE=0 -option USE_ELF_BOOT=1 option IDE_SWAB=1 option IDE_OFFSET=0 diff --git a/targets/motorola/sandpoint/Config.lb b/targets/motorola/sandpoint/Config.lb index d7dff1b2ae..e10b6249a7 100644 --- a/targets/motorola/sandpoint/Config.lb +++ b/targets/motorola/sandpoint/Config.lb @@ -16,7 +16,6 @@ uses NO_POST uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_IDE_STREAM uses IDE_BOOT_DRIVE -uses USE_ELF_BOOT uses IDE_SWAB IDE_OFFSET uses ROM_SIZE ROM_IMAGE_SIZE uses ROM_SECTION_SIZE @@ -51,7 +50,6 @@ option CONFIG_CONSOLE_SERIAL8250=1 ## Boot linux from IDE option CONFIG_IDE_STREAM=1 option IDE_BOOT_DRIVE=0 -option USE_ELF_BOOT=1 option IDE_SWAB=1 option IDE_OFFSET=0 diff --git a/targets/tyan/s2880/Config.lb b/targets/tyan/s2880/Config.lb index 42294f396d..0643751e98 100644 --- a/targets/tyan/s2880/Config.lb +++ b/targets/tyan/s2880/Config.lb @@ -6,7 +6,6 @@ loadoptions target s2880 -uses AMD8111_DEV uses ARCH uses CONFIG_COMPRESS uses CONFIG_IOAPIC @@ -15,9 +14,7 @@ uses CONFIG_ROM_STREAM_START uses CONFIG_SMP uses CONFIG_UDELAY_TSC uses CPU_FIXUP -uses ENABLE_FIXED_AND_VARIABLE_MTRRS uses FALLBACK_SIZE -uses FINAL_MAINBOARD_FIXUP uses HAVE_FALLBACK_BOOT uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE @@ -31,7 +28,6 @@ uses k8 uses MAINBOARD uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR -uses MAX_CPUS #uses MEMORY_HOLE uses PAYLOAD_SIZE uses _RAMBASE @@ -40,12 +36,8 @@ uses ROM_IMAGE_SIZE uses ROM_SECTION_OFFSET uses ROM_SECTION_SIZE uses ROM_SIZE -uses SIO_BASE -uses SIO_SYSTEM_CLK_INPUT uses STACK_SIZE -uses USE_ELF_BOOT uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE uses USE_OPTION_TABLE uses HAVE_OPTION_TABLE uses CONFIG_CHIP_CONFIGURE @@ -57,7 +49,7 @@ uses MAXIMUM_CONSOLE_LOGLEVEL uses DEBUG uses CONFIG_MAX_CPUS uses CONFIG_LOGICAL_CPUS -uses MAX_PHYSICAL_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS uses LINUXBIOS_EXTRA_VERSION uses XIP_ROM_SIZE uses XIP_ROM_BASE @@ -97,10 +89,6 @@ option CONFIG_CHIP_CONFIGURE=1 #option CONFIG_LSI_SCSI_FW_FIXUP=1 -### Customize our winbond superio chip for this motherboard -### -option SIO_BASE=0x2e -option SIO_SYSTEM_CLK_INPUT=0 # ### ### Build code to export a programmable irq routing table @@ -114,9 +102,8 @@ option IRQ_SLOT_COUNT=13 ### option CONFIG_SMP=1 option CONFIG_MAX_CPUS=2 -option MAX_CPUS=2 option CONFIG_LOGICAL_CPUS=0 -option MAX_PHYSICAL_CPUS=2 +option CONFIG_MAX_PHYSICAL_CPUS=2 # ### ### Build code to setup a generic IOAPIC @@ -135,26 +122,12 @@ option CONFIG_IOAPIC=1 #option MEMORY_HOLE=0 # ### -### Enable both fixed and variable MTRRS -### When we setup MTRRs in mtrr.c -### -### We must setup the fixed mtrrs or we confuse SMP secondary -### processor identification -### -option ENABLE_FIXED_AND_VARIABLE_MTRRS=1 -# -### ### Clean up the motherboard id strings ### option MAINBOARD_PART_NUMBER="S2880" option MAINBOARD_VENDOR="Tyan" # ### -### Call the final_mainboard_fixup function -### -option FINAL_MAINBOARD_FIXUP=1 - -### ### Compute the location and size of where this firmware image ### (linuxBIOS plus bootloader) will live in the boot rom chip. ### @@ -174,9 +147,6 @@ option ROM_IMAGE_SIZE=65536 ## We do use compressed image option CONFIG_COMPRESS=1 -option USE_ELF_BOOT=1 - - option CONFIG_CONSOLE_SERIAL8250=1 option TTYS0_BAUD=115200 @@ -200,8 +170,6 @@ option MAXIMUM_CONSOLE_LOGLEVEL=9 option DEBUG=1 -option AMD8111_DEV=0x5 - # ## LinuxBIOS C code runs at this location in RAM diff --git a/targets/tyan/s2882/Config.lb b/targets/tyan/s2882/Config.lb index 5842babc5c..3589656794 100644 --- a/targets/tyan/s2882/Config.lb +++ b/targets/tyan/s2882/Config.lb @@ -6,7 +6,6 @@ loadoptions target s2882 -uses AMD8111_DEV uses ARCH uses CONFIG_COMPRESS uses CONFIG_IOAPIC @@ -15,9 +14,7 @@ uses CONFIG_ROM_STREAM_START uses CONFIG_SMP uses CONFIG_UDELAY_TSC uses CPU_FIXUP -uses ENABLE_FIXED_AND_VARIABLE_MTRRS uses FALLBACK_SIZE -uses FINAL_MAINBOARD_FIXUP uses HAVE_FALLBACK_BOOT uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE @@ -31,7 +28,6 @@ uses k8 uses MAINBOARD uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR -uses MAX_CPUS #uses MEMORY_HOLE uses PAYLOAD_SIZE uses _RAMBASE @@ -40,12 +36,8 @@ uses ROM_IMAGE_SIZE uses ROM_SECTION_OFFSET uses ROM_SECTION_SIZE uses ROM_SIZE -uses SIO_BASE -uses SIO_SYSTEM_CLK_INPUT uses STACK_SIZE -uses USE_ELF_BOOT uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE uses USE_OPTION_TABLE uses HAVE_OPTION_TABLE uses CONFIG_CHIP_CONFIGURE @@ -57,7 +49,7 @@ uses MAXIMUM_CONSOLE_LOGLEVEL uses DEBUG uses CONFIG_MAX_CPUS uses CONFIG_LOGICAL_CPUS -uses MAX_PHYSICAL_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS uses LINUXBIOS_EXTRA_VERSION uses XIP_ROM_SIZE uses XIP_ROM_BASE @@ -97,10 +89,6 @@ option CONFIG_CHIP_CONFIGURE=1 #option CONFIG_LSI_SCSI_FW_FIXUP=1 -### Customize our winbond superio chip for this motherboard -### -option SIO_BASE=0x2e -option SIO_SYSTEM_CLK_INPUT=0 # ### ### Build code to export a programmable irq routing table @@ -114,9 +102,8 @@ option IRQ_SLOT_COUNT=15 ### option CONFIG_SMP=1 option CONFIG_MAX_CPUS=2 -option MAX_CPUS=2 option CONFIG_LOGICAL_CPUS=0 -option MAX_PHYSICAL_CPUS=2 +option CONFIG_MAX_PHYSICAL_CPUS=2 # ### ### Build code to setup a generic IOAPIC @@ -135,25 +122,10 @@ option CONFIG_IOAPIC=1 #option MEMORY_HOLE=0 # ### -### Enable both fixed and variable MTRRS -### When we setup MTRRs in mtrr.c -### -### We must setup the fixed mtrrs or we confuse SMP secondary -### processor identification -### -option ENABLE_FIXED_AND_VARIABLE_MTRRS=1 -# -### ### Clean up the motherboard id strings ### option MAINBOARD_PART_NUMBER="S2882" option MAINBOARD_VENDOR="Tyan" -# -### -### Call the final_mainboard_fixup function -### -option FINAL_MAINBOARD_FIXUP=1 - ### ### Compute the location and size of where this firmware image ### (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -174,9 +146,6 @@ option ROM_IMAGE_SIZE=65536 ## We do use compressed image option CONFIG_COMPRESS=1 -option USE_ELF_BOOT=1 - - option CONFIG_CONSOLE_SERIAL8250=1 option TTYS0_BAUD=115200 @@ -200,8 +169,6 @@ option MAXIMUM_CONSOLE_LOGLEVEL=9 option DEBUG=1 -option AMD8111_DEV=0x5 - # ## LinuxBIOS C code runs at this location in RAM diff --git a/targets/tyan/s2885/Config.lb b/targets/tyan/s2885/Config.lb index 9f0e179874..fb99316da1 100644 --- a/targets/tyan/s2885/Config.lb +++ b/targets/tyan/s2885/Config.lb @@ -6,7 +6,6 @@ loadoptions target s2885 -uses AMD8111_DEV uses ARCH uses CONFIG_COMPRESS uses CONFIG_IOAPIC @@ -15,9 +14,7 @@ uses CONFIG_ROM_STREAM_START uses CONFIG_SMP uses CONFIG_UDELAY_TSC uses CPU_FIXUP -uses ENABLE_FIXED_AND_VARIABLE_MTRRS uses FALLBACK_SIZE -uses FINAL_MAINBOARD_FIXUP uses HAVE_FALLBACK_BOOT uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE @@ -31,7 +28,6 @@ uses k8 uses MAINBOARD uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR -uses MAX_CPUS #uses MEMORY_HOLE uses PAYLOAD_SIZE uses _RAMBASE @@ -40,12 +36,8 @@ uses ROM_IMAGE_SIZE uses ROM_SECTION_OFFSET uses ROM_SECTION_SIZE uses ROM_SIZE -uses SIO_BASE -uses SIO_SYSTEM_CLK_INPUT uses STACK_SIZE -uses USE_ELF_BOOT uses USE_FALLBACK_IMAGE -uses USE_NORMAL_IMAGE uses USE_OPTION_TABLE uses HAVE_OPTION_TABLE uses CONFIG_CHIP_CONFIGURE @@ -57,7 +49,7 @@ uses MAXIMUM_CONSOLE_LOGLEVEL uses DEBUG uses CONFIG_MAX_CPUS uses CONFIG_LOGICAL_CPUS -uses MAX_PHYSICAL_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS uses LINUXBIOS_EXTRA_VERSION uses XIP_ROM_SIZE uses XIP_ROM_BASE @@ -97,11 +89,6 @@ option CONFIG_CHIP_CONFIGURE=1 #option CONFIG_LSI_SCSI_FW_FIXUP=1 -### Customize our winbond superio chip for this motherboard -### -option SIO_BASE=0x2e -option SIO_SYSTEM_CLK_INPUT=0 -# ### ### Build code to export a programmable irq routing table ### @@ -114,9 +101,8 @@ option IRQ_SLOT_COUNT=11 ### option CONFIG_SMP=1 option CONFIG_MAX_CPUS=2 -option MAX_CPUS=2 option CONFIG_LOGICAL_CPUS=0 -option MAX_PHYSICAL_CPUS=2 +option CONFIG_MAX_PHYSICAL_CPUS=2 # ### ### Build code to setup a generic IOAPIC @@ -135,26 +121,12 @@ option CONFIG_IOAPIC=1 #option MEMORY_HOLE=0 # ### -### Enable both fixed and variable MTRRS -### When we setup MTRRs in mtrr.c -### -### We must setup the fixed mtrrs or we confuse SMP secondary -### processor identification -### -option ENABLE_FIXED_AND_VARIABLE_MTRRS=1 -# -### ### Clean up the motherboard id strings ### option MAINBOARD_PART_NUMBER="S2885" option MAINBOARD_VENDOR="Tyan" # ### -### Call the final_mainboard_fixup function -### -option FINAL_MAINBOARD_FIXUP=1 - -### ### Compute the location and size of where this firmware image ### (linuxBIOS plus bootloader) will live in the boot rom chip. ### @@ -174,9 +146,6 @@ option ROM_IMAGE_SIZE=65536 ## We do use compressed image option CONFIG_COMPRESS=1 -option USE_ELF_BOOT=1 - - option CONFIG_CONSOLE_SERIAL8250=1 option TTYS0_BAUD=115200 @@ -200,8 +169,6 @@ option MAXIMUM_CONSOLE_LOGLEVEL=9 option DEBUG=1 -option AMD8111_DEV=0x5 - # ## LinuxBIOS C code runs at this location in RAM diff --git a/util/newconfig/config.g b/util/newconfig/config.g index ee9d867b46..a7e0385a10 100644 --- a/util/newconfig/config.g +++ b/util/newconfig/config.g @@ -4,6 +4,8 @@ import re import string import types +import traceback + warnings = 0 errors = 0 @@ -54,10 +56,7 @@ class stack: return len(self.stack) def __getitem__ (self, i): - try: - return self.stack[i] - except IndexError: - return 0 + return self.stack[i] def __iter__ (self): return self.__stack_iter(self.stack) @@ -618,6 +617,9 @@ class partobj: # definitions for this part (only want to do it once) self.done_types = 0 + # Path to the device + self.path = "" + # If no instance name is supplied then generate # a unique name if (instance_name == 0): @@ -637,8 +639,12 @@ class partobj: # me as the child. if (parent.children): debug.info(debug.gencode, "add %s (%d) as sibling" % (parent.children.dir, parent.children.instance)) - self.siblings = parent.children - parent.children = self + youngest = parent.children; + while(youngest.siblings): + youngest = youngest.siblings + youngest.siblings = self + else: + parent.children = self else: self.parent = self @@ -656,10 +662,10 @@ class partobj: print "%d: siblings %s" % (lvl, self.siblings.dir) print "%d: initcode " % lvl for i in self.initcode: - print " %s" % i + print "\t%s" % i print "%d: registercode " % lvl for f, v in self.registercode.items(): - print " %s = %s" % (f, v) + print "\t%s = %s" % (f, v) print "\n" def gencode(self, file, pass_num): @@ -681,7 +687,7 @@ class partobj: if (self.registercode): file.write("\t= {\n") for f, v in self.registercode.items(): - file.write( " .%s = %s,\n" % (f, v)) + file.write( "\t.%s = %s,\n" % (f, v)) file.write("};\n") else: file.write(";") @@ -690,33 +696,35 @@ class partobj: file.write("struct chip %s = {\n" % self.instance_name) else: file.write("struct chip static_root = {\n") - file.write("/* %s %s */\n" % (self.part, self.dir)) + file.write("\t/* %s %s */\n" % (self.part, self.dir)) + if (self.path != ""): + file.write("\t.path = { %s\n\t},\n" % (self.path) ); if (self.siblings): debug.info(debug.gencode, "gencode: siblings(%d)" \ % self.siblings.instance) - file.write(" .next = &%s,\n" \ + file.write("\t.next = &%s,\n" \ % self.siblings.instance_name) else: - file.write(" .next = 0,\n") + file.write("\t.next = 0,\n") if (self.children): debug.info(debug.gencode, "gencode: children(%d)" \ % self.children.instance) - file.write(" .children = &%s,\n" \ + file.write("\t.children = &%s,\n" \ % self.children.instance_name) else: - file.write(" .children = 0,\n") + file.write("\t.children = 0,\n") if (self.chipconfig): # set the pointer to the structure for all this # type of part - file.write(" .control= &%s_control,\n" % \ + file.write("\t.control= &%s_control,\n" % \ self.type_name ) # generate the pointer to the isntance # of the chip struct - file.write(" .chip_info = (void *) &%s,\n" \ + file.write("\t.chip_info = (void *) &%s,\n" \ % self.config_name) else: - file.write(" .control= 0,\n") - file.write(" .chip_info= 0,\n") + file.write("\t.control= 0,\n") + file.write("\t.chip_info= 0,\n") file.write("};\n") def addinit(self, code): @@ -734,6 +742,34 @@ class partobj: value = dequote(value) setdict(self.registercode, field, value) + def addpcipath(self, enable, channel, slot, function): + """ Add a relative pci style path from our parent to this device """ + if (channel < 0): + fatal("Invalid channel") + if ((slot < 0) or (slot > 0x1f)): + fatal("Invalid device id") + if ((function < 0) or (function > 7)): + fatal("Invalid function") + self.path = "%s\n\t\t{ .channel = %d, .enable = %d, .path = {.type=DEVICE_PATH_PCI,.u={.pci={ .devfn = PCI_DEVFN(0x%x,%d) }}}}," % (self.path, channel, enable, slot, function) + + def addpnppath(self, enable, channel, port, device): + """ Add a relative path to a pnp device hanging off our parent """ + if (channel < 0): + fatal("Invalid channel") + if ((port < 0) or (port > 65536)): + fatal("Invalid port") + if ((device < 0) or (device > 0xff)): + fatal("Invalid device") + self.path = "%s\n\t\t{ .channel = %d, .enable = %d, .path={.type=DEVICE_PATH_PNP,.u={.pnp={ .port = 0x%x, .device = 0x%x }}}}," % (self.path, channel, enable, port, device) + + def addi2cpath(self, enable, channel, device): + """ Add a relative path to a i2c device hanging off our parent """ + if (channel < 0): + fatal("Invalid channel") + if ((device < 0) or (device > 0x7f)): + fatal("Invalid device") + self.path = "%s\n\t\t{ .channel = %d, .enable = %d, .path = {.type=DEVICE_PATH_I2C,.u={.i2c={ .device = 0x%x }}}}, " % (self.path, channel, enable, device) + def usesoption(self, name): """Declare option that can be used by this part""" global global_options @@ -1070,10 +1106,9 @@ def cpudir(path): global cpu_type if (cpu_type and (cpu_type != path)): fatal("Two different CPU types: %s and %s" % (cpu_type, path)) - if (not cpu_type): - srcdir = "/cpu/%s" % path - dodir(srcdir, "Config.lb") - cpu_type = path + srcdir = "/cpu/%s" % path + dodir(srcdir, "Config.lb") + cpu_type = path def part(type, path, file, name): global curimage, dirstack, partstack @@ -1183,7 +1218,7 @@ def tohex(name): def IsInt( str ): """ Is the given string an integer?""" try: - num = int(str) + num = long(str) return 1 except ValueError: return 0 @@ -1265,8 +1300,9 @@ parser Config: token TARGET: 'target' token USED: 'used' token USES: 'uses' - token NUM: r'[0-9]+' - token XNUM: r'0x[0-9a-fA-F]+' + token NUM: '[0-9]+' + token HEX_NUM: '[0-9a-fA-F]+' + token HEX_PREFIX: '0x' # Why is path separate? Because paths to resources have to at least # have a slash, we thinks token PATH: r'[a-zA-Z0-9_.][a-zA-Z0-9/_.]+[a-zA-Z0-9_.]+' @@ -1277,6 +1313,12 @@ parser Config: token DELEXPR: r'{([^}]+|\\.)*}' token STR: r'"([^\\"]+|\\.)*"' token RAWTEXT: r'.*' + token ON: 'on' + token OFF: 'off' + token PCI: 'pci' + token PNP: 'pnp' + token I2C: 'i2c' + rule expr: logical {{ l = logical }} ( "&&" logical {{ l = l and logical }} @@ -1296,8 +1338,8 @@ parser Config: )* {{ return v }} # A term is a number, variable, or an expression surrounded by parentheses - rule term: NUM {{ return atoi(NUM) }} - | XNUM {{ return tohex(XNUM) }} + rule term: NUM {{ return long(NUM, 10) }} + | HEX_PREFIX HEX_NUM {{ return long(HEX_NUM, 16) }} | ID {{ return lookup(ID) }} | unop {{ return unop }} | "\\(" expr "\\)" {{ return expr }} @@ -1373,6 +1415,28 @@ parser Config: rule register<<C>>: REGISTER field '=' STR {{ if (C): addregister(field, STR) }} + rule enable: {{ val = 1 }} + [ ( ON {{ val = 1 }} + | OFF {{ val = 0 }} + ) ] {{ return val }} + + rule pci<<C>>: PCI HEX_NUM {{ channel = int(HEX_NUM,16) }} + ':' HEX_NUM {{ slot = int(HEX_NUM,16) }} + '.' HEX_NUM {{ function = int(HEX_NUM, 16) }} + enable + {{ if (C): partstack.tos().addpcipath(enable, channel, slot, function) }} + + rule pnp<<C>>: PNP HEX_NUM {{ channel = int(HEX_NUM,16) }} + ':' HEX_NUM {{ port = int(HEX_NUM,16) }} + '.' HEX_NUM {{ device = int(HEX_NUM, 16) }} + enable + {{ if (C): partstack.tos().addpnppath(enable, channel, port, device) }} + + rule i2c<<C>>: I2C HEX_NUM {{ channel = int(HEX_NUM, 16) }} + ':' HEX_NUM {{ device = int(HEX_NUM, 16) }} + enable + {{ if (C): partstatck.tos().addi2cpath(enable, channel, device) }} + rule prtval: expr {{ return str(expr) }} | STR {{ return STR }} @@ -1402,8 +1466,10 @@ parser Config: | object<<C>> {{ return object }} | option<<C>> {{ return option }} | partdef<<C>> {{ return partdef }} - | prtstmt<<C>> {{ return prtstmt}} - | register<<C>> {{ return register}} + | prtstmt<<C>> {{ return prtstmt }} + | register<<C>> {{ return register }} + | pci<<C>> {{ return pci }} + | pnp<<C>> {{ return pnp }} # ENTRY for parsing Config.lb file rule cfgfile: (uses<<1>>)* @@ -1560,7 +1626,7 @@ def writeimagemakefile(image): # Instead, let make do the work of computing CPUFLAGS: file.write("# Get the value of TOP, VARIABLES, and several other variables.\n") file.write("include Makefile.settings\n\n") - file.write("# Function to create an item like -Di586 or -DMAX_CPUS='1' or -Ui686\n") + file.write("# Function to create an item like -Di586 or -DCONFIG_MAX_CPUS='1' or -Ui686\n") file.write("D_item = $(if $(subst undefined,,$(origin $1)),-D$1$(if $($1),='$($1)',),-U$1)\n\n") file.write("# Compute the value of CPUFLAGS here during make's first pass.\n") file.write("CPUFLAGS := $(foreach _var_,$(VARIABLES),$(call D_item,$(_var_)))\n\n") @@ -1688,7 +1754,8 @@ def writeimagemakefile(image): #file.write("\tpython $(TOP)/util/config/NLBConfig.py %s $(TOP)\n" # % top_config_file) - keys = image.getroot().uses_options.keys() + #keys = image.getroot().uses_options.keys() + keys = global_options_by_order keys.sort() file.write("\necho:\n") for key in keys: @@ -1791,6 +1858,7 @@ def writecode(image): print "Creating", filename file = safe_open(filename, 'w+') file.write("#include <device/chip.h>\n") + file.write("#include <device/pci.h>\n") for path in image.getconfigincludes().values(): file.write("#include \"%s\"\n" % path) gencode(image.getroot(), file, 0) |