diff options
| -rw-r--r-- | src/mainboard/google/poppy/Kconfig | 2 | ||||
| -rw-r--r-- | src/mainboard/google/poppy/variants/soraka/devicetree.cb | 432 |
2 files changed, 434 insertions, 0 deletions
diff --git a/src/mainboard/google/poppy/Kconfig b/src/mainboard/google/poppy/Kconfig index fee40cdd55..a947ec1872 100644 --- a/src/mainboard/google/poppy/Kconfig +++ b/src/mainboard/google/poppy/Kconfig @@ -14,12 +14,14 @@ config BOARD_GOOGLE_BASEBOARD_POPPY select MAINBOARD_HAS_CHROMEOS select MAINBOARD_USES_FSP2_0 select NO_FADT_8042 + select POPPY_USE_I2C_TPM if BOARD_GOOGLE_SORAKA select SOC_INTEL_KABYLAKE if BOARD_GOOGLE_BASEBOARD_POPPY config DEVICETREE string + default "variants/soraka/devicetree.cb" if BOARD_GOOGLE_SORAKA default "variants/baseboard/devicetree.cb" config DRIVER_TPM_I2C_BUS diff --git a/src/mainboard/google/poppy/variants/soraka/devicetree.cb b/src/mainboard/google/poppy/variants/soraka/devicetree.cb new file mode 100644 index 0000000000..39739e8c25 --- /dev/null +++ b/src/mainboard/google/poppy/variants/soraka/devicetree.cb @@ -0,0 +1,432 @@ +chip soc/intel/skylake + + # Deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "1" + register "deep_s5_enable_ac" = "1" + register "deep_s5_enable_dc" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "EnableTraceHub" = "0" + register "XdciEnable" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "1" + register "SaImguEnable" = "1" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "2" + register "IshEnable" = "0" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "FspSkipMpInit" = "1" + register "SaGv" = "3" + register "SerialIrqConfigSirqEnable" = "1" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "1" + register "SendVrMbxCmd" = "1" # IMVP8 workaround + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(7), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(34), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + # Enable Root port 1. + register "PcieRpEnable[0]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[0]" = "1" + # RP 1 uses SRCCLKREQ1# + register "PcieRpClkReqNumber[0]" = "1" + + register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" # Touchscreen + register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" # H1 + register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" # Camera + register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" # Pen + register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # Camera + register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" # Audio + + # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM + # communication before memory is up. + register "gspi[0]" = "{ + .speed_mhz = 1, + .early_init = 1, + }" + + # Configure I2C1 for cr50 TPM. Early init is required to set up a BAR + # for TPM communication before memory is up. + register "i2c[1]" = "{ + .early_init = 1, + }" + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSpi0] = PchSerialIoPci, + [PchSerialIoIndexSpi1] = PchSerialIoPci, + [PchSerialIoIndexUart0] = PchSerialIoPci, + [PchSerialIoIndexUart1] = PchSerialIoDisabled, + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, + }" + + register "speed_shift_enable" = "1" + register "tdp_pl2_override" = "7" + register "tcc_offset" = "10" # TCC of 90C + + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_E15" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ATML0001"" + register "desc" = ""Atmel Touchscreen"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" + register "probed" = "1" + device i2c 4b on end + end + end # I2C #0 + device pci 15.1 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)" + device i2c 50 on end + end + end # I2C #1 + device pci 15.2 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3472"" + register "acpi_name" = ""PMIC"" + register "chip_name" = ""TPS68470 PMIC"" + register "device_type" = "INTEL_ACPI_CAMERA_PMIC" + device i2c 4d on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTID850"" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""OV 13850 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + # Camera SSDB buffer + register "ssdb.sensor_card_sku" = "0x50" + register "ssdb.link_used" = "0x00" + register "ssdb.lanes_used" = "0x04" + register "ssdb.rom_type" = "0x08" + register "ssdb.vcm_type" = "0x03" + register "ssdb.platform" = "0x09" + register "ssdb.flash_support" = "0x02" + register "ssdb.privacy_led" = "0x01" + register "ssdb.degree" = "0x00" + register "ssdb.mipi_define" = "0x01" + register "ssdb.mclk" = "0x016E3600" + + # Sensor PWDB entries + register "num_pwdb_entries" = "5" + + register "pwdb[0].name" = ""VSIO"" + register "pwdb[0].value" = "1800600" + register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[0].delay_usec" = "0" + + register "pwdb[1].name" = ""tps68470-a"" + register "pwdb[1].value" = "19200000" + register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_CLK" + register "pwdb[1].delay_usec" = "0" + + register "pwdb[2].name" = ""ANA"" + register "pwdb[2].value" = "2815200" + register "pwdb[2].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[2].delay_usec" = "3000" + + register "pwdb[3].name" = ""s_resetn"" + register "pwdb[3].value" = "1" + register "pwdb[3].entry_type" = "INTEL_ACPI_CAMERA_GPIO" + register "pwdb[3].delay_usec" = "0" + + register "pwdb[4].name" = ""CORE"" + register "pwdb[4].value" = "1200000" + register "pwdb[4].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[4].delay_usec" = "3000" + + device i2c 10 on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""DW9714"" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""Dongwoon AF DAC"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + # VCM PWDB entries + register "num_pwdb_entries" = "2" + register "pwdb[0].name" = ""VSIO"" + register "pwdb[0].value" = "1800600" + register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[0].delay_usec" = "0" + + register "pwdb[1].name" = ""VCM"" + register "pwdb[1].value" = "2815200" + register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[1].delay_usec" = "3000" + + device i2c 0xc on end + end + end # I2C #2 + device pci 15.3 on + chip drivers/i2c/hid + register "generic.hid" = ""WCOM50C1"" + register "generic.desc" = ""WCOM Digitizer"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x9 on end + end + end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 on + chip drivers/i2c/max98927 + register "interleave_mode" = "1" + register "uid" = "0" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 39 on end + end + chip drivers/i2c/max98927 + register "interleave_mode" = "1" + register "uid" = "1" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 3A on end + end + chip drivers/i2c/generic + register "hid" = ""10EC5663"" + register "name" = ""RT53"" + register "desc" = ""Realtek RT5663"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D9)" + register "probed" = "1" + device i2c 13 on end + end + end # I2C #5 + device pci 19.2 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3479"" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""OV 5670 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + # Camera SSDB buffer + register "ssdb.sensor_card_sku" = "0x50" + register "ssdb.link_used" = "0x01" + register "ssdb.lanes_used" = "0x02" + register "ssdb.rom_type" = "0x08" + register "ssdb.vcm_type" = "0x03" + register "ssdb.platform" = "0x09" + register "ssdb.flash_support" = "0x02" + register "ssdb.privacy_led" = "0x01" + register "ssdb.mipi_define" = "0x01" + register "ssdb.mclk" = "0x016E3600" + + # Sensor PWDB entries + register "num_pwdb_entries" = "6" + + register "pwdb[0].name" = ""VSIO"" + register "pwdb[0].value" = "1800600" + register "pwdb[0].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[0].delay_usec" = "0" + + register "pwdb[1].name" = ""AUX2"" + register "pwdb[1].value" = "1800600" + register "pwdb[1].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[1].delay_usec" = "0" + + register "pwdb[2].name" = ""tps68470-b"" + register "pwdb[2].value" = "19200000" + register "pwdb[2].entry_type" = "INTEL_ACPI_CAMERA_CLK" + register "pwdb[2].delay_usec" = "0" + + register "pwdb[3].name" = ""gpio.4"" + register "pwdb[3].value" = "1" + register "pwdb[3].entry_type" = "INTEL_ACPI_CAMERA_GPIO" + register "pwdb[3].delay_usec" = "3000" + + register "pwdb[4].name" = ""gpio.5"" + register "pwdb[4].value" = "1" + register "pwdb[4].entry_type" = "INTEL_ACPI_CAMERA_GPIO" + register "pwdb[4].delay_usec" = "0" + + register "pwdb[5].name" = ""AUX1"" + register "pwdb[5].value" = "1213200" + register "pwdb[5].entry_type" = "INTEL_ACPI_CAMERA_REGULATOR" + register "pwdb[5].delay_usec" = "3000" + + device i2c 10 on end + end + end # I2C #4 + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_PCI_EXP" + device pci 00.0 on end + end + end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 on end # GSPI #0 + device pci 1e.3 on end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end |