summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/mainboard/advansus/a785e-i/get_bus_conf.c28
-rw-r--r--src/mainboard/amd/bimini_fam10/get_bus_conf.c29
-rw-r--r--src/mainboard/amd/mahogany_fam10/get_bus_conf.c27
-rw-r--r--src/mainboard/amd/tilapia_fam10/get_bus_conf.c18
-rw-r--r--src/mainboard/asus/kcma-d8/get_bus_conf.c28
-rw-r--r--src/mainboard/asus/kgpe-d16/get_bus_conf.c27
-rw-r--r--src/mainboard/asus/m4a78-em/get_bus_conf.c27
-rw-r--r--src/mainboard/asus/m4a785-m/get_bus_conf.c27
-rw-r--r--src/mainboard/asus/m5a88-v/get_bus_conf.c28
-rw-r--r--src/mainboard/avalue/eax-785e/get_bus_conf.c28
-rw-r--r--src/mainboard/gigabyte/ma785gm/get_bus_conf.c27
-rw-r--r--src/mainboard/gigabyte/ma785gmt/get_bus_conf.c26
-rw-r--r--src/mainboard/gigabyte/ma78gm/get_bus_conf.c27
-rw-r--r--src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c26
-rw-r--r--src/mainboard/jetway/pa78vm5/get_bus_conf.c27
-rw-r--r--src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c27
16 files changed, 16 insertions, 411 deletions
diff --git a/src/mainboard/advansus/a785e-i/get_bus_conf.c b/src/mainboard/advansus/a785e-i/get_bus_conf.c
index 598bef42d1..d21b500fa5 100644
--- a/src/mainboard/advansus/a785e-i/get_bus_conf.c
+++ b/src/mainboard/advansus/a785e-i/get_bus_conf.c
@@ -25,37 +25,11 @@
*/
u32 apicid_sb800;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/amd/bimini_fam10/get_bus_conf.c b/src/mainboard/amd/bimini_fam10/get_bus_conf.c
index a03714d5a2..799455f620 100644
--- a/src/mainboard/amd/bimini_fam10/get_bus_conf.c
+++ b/src/mainboard/amd/bimini_fam10/get_bus_conf.c
@@ -25,41 +25,14 @@
*/
u32 apicid_sb800;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
-
pirq_router_bus = (sysconf.pci1234[0] >> 16) & 0xff;
/* I/O APICs: APIC ID Version State Address */
diff --git a/src/mainboard/amd/mahogany_fam10/get_bus_conf.c b/src/mainboard/amd/mahogany_fam10/get_bus_conf.c
index 88b7bf115e..ade9c79e00 100644
--- a/src/mainboard/amd/mahogany_fam10/get_bus_conf.c
+++ b/src/mainboard/amd/mahogany_fam10/get_bus_conf.c
@@ -26,36 +26,11 @@
*/
u32 apicid_sb700;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/amd/tilapia_fam10/get_bus_conf.c b/src/mainboard/amd/tilapia_fam10/get_bus_conf.c
index 88b7bf115e..0f30f165cf 100644
--- a/src/mainboard/amd/tilapia_fam10/get_bus_conf.c
+++ b/src/mainboard/amd/tilapia_fam10/get_bus_conf.c
@@ -27,15 +27,6 @@
u32 apicid_sb700;
/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
* HT Chain device num, actually it is unit id base of every ht device in chain,
* assume every chain only have 4 ht device at most
*/
@@ -47,15 +38,8 @@ u32 hcdnx[] = {
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/asus/kcma-d8/get_bus_conf.c b/src/mainboard/asus/kcma-d8/get_bus_conf.c
index 03a8415cfc..3a9eb9e346 100644
--- a/src/mainboard/asus/kcma-d8/get_bus_conf.c
+++ b/src/mainboard/asus/kcma-d8/get_bus_conf.c
@@ -27,38 +27,12 @@
*/
u32 apicid_sp5100;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
pirq_router_bus = (sysconf.pci1234[0] >> 16) & 0xff;
diff --git a/src/mainboard/asus/kgpe-d16/get_bus_conf.c b/src/mainboard/asus/kgpe-d16/get_bus_conf.c
index 03a8415cfc..903e7e1e31 100644
--- a/src/mainboard/asus/kgpe-d16/get_bus_conf.c
+++ b/src/mainboard/asus/kgpe-d16/get_bus_conf.c
@@ -27,37 +27,12 @@
*/
u32 apicid_sp5100;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/asus/m4a78-em/get_bus_conf.c b/src/mainboard/asus/m4a78-em/get_bus_conf.c
index 88b7bf115e..ade9c79e00 100644
--- a/src/mainboard/asus/m4a78-em/get_bus_conf.c
+++ b/src/mainboard/asus/m4a78-em/get_bus_conf.c
@@ -26,36 +26,11 @@
*/
u32 apicid_sb700;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/asus/m4a785-m/get_bus_conf.c b/src/mainboard/asus/m4a785-m/get_bus_conf.c
index 88b7bf115e..ade9c79e00 100644
--- a/src/mainboard/asus/m4a785-m/get_bus_conf.c
+++ b/src/mainboard/asus/m4a785-m/get_bus_conf.c
@@ -26,36 +26,11 @@
*/
u32 apicid_sb700;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/asus/m5a88-v/get_bus_conf.c b/src/mainboard/asus/m5a88-v/get_bus_conf.c
index 598bef42d1..d21b500fa5 100644
--- a/src/mainboard/asus/m5a88-v/get_bus_conf.c
+++ b/src/mainboard/asus/m5a88-v/get_bus_conf.c
@@ -25,37 +25,11 @@
*/
u32 apicid_sb800;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/avalue/eax-785e/get_bus_conf.c b/src/mainboard/avalue/eax-785e/get_bus_conf.c
index 598bef42d1..d21b500fa5 100644
--- a/src/mainboard/avalue/eax-785e/get_bus_conf.c
+++ b/src/mainboard/avalue/eax-785e/get_bus_conf.c
@@ -25,37 +25,11 @@
*/
u32 apicid_sb800;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/gigabyte/ma785gm/get_bus_conf.c b/src/mainboard/gigabyte/ma785gm/get_bus_conf.c
index 88b7bf115e..ade9c79e00 100644
--- a/src/mainboard/gigabyte/ma785gm/get_bus_conf.c
+++ b/src/mainboard/gigabyte/ma785gm/get_bus_conf.c
@@ -26,36 +26,11 @@
*/
u32 apicid_sb700;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c b/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c
index 541b45f656..0de0760637 100644
--- a/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c
+++ b/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c
@@ -26,36 +26,12 @@
*/
u32 apicid_sb700;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
pirq_router_bus = (sysconf.pci1234[0] >> 16) & 0xff;
diff --git a/src/mainboard/gigabyte/ma78gm/get_bus_conf.c b/src/mainboard/gigabyte/ma78gm/get_bus_conf.c
index 88b7bf115e..ade9c79e00 100644
--- a/src/mainboard/gigabyte/ma78gm/get_bus_conf.c
+++ b/src/mainboard/gigabyte/ma78gm/get_bus_conf.c
@@ -26,36 +26,11 @@
*/
u32 apicid_sb700;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c b/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c
index 88b7bf115e..942941d85f 100644
--- a/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c
+++ b/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c
@@ -26,36 +26,12 @@
*/
u32 apicid_sb700;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/jetway/pa78vm5/get_bus_conf.c b/src/mainboard/jetway/pa78vm5/get_bus_conf.c
index 88b7bf115e..ade9c79e00 100644
--- a/src/mainboard/jetway/pa78vm5/get_bus_conf.c
+++ b/src/mainboard/jetway/pa78vm5/get_bus_conf.c
@@ -26,36 +26,11 @@
*/
u32 apicid_sb700;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
void get_bus_conf(void)
{
u32 apicid_base;
- int i;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
diff --git a/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c
index b36008118f..7153f79df2 100644
--- a/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c
+++ b/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c
@@ -27,38 +27,13 @@
u8 bus_sr5650[14];
u32 apicid_sp5100;
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-
-
void get_bus_conf(void)
{
u32 apicid_base;
struct device *dev;
int i;
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_pci1234();
+ get_default_pci1234(1);
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 10:04:08 +0000