diff options
| -rw-r--r-- | src/mainboard/google/rex/Kconfig | 1 | ||||
| -rw-r--r-- | src/mainboard/google/rex/variants/rex0/overridetree.cb | 141 |
2 files changed, 140 insertions, 2 deletions
diff --git a/src/mainboard/google/rex/Kconfig b/src/mainboard/google/rex/Kconfig index f7095953ce..fdc7f4fd10 100644 --- a/src/mainboard/google/rex/Kconfig +++ b/src/mainboard/google/rex/Kconfig @@ -6,6 +6,7 @@ config BOARD_GOOGLE_REX_COMMON select DRIVERS_I2C_HID select DRIVERS_SOUNDWIRE_ALC5682 select DRIVERS_WIFI_GENERIC + select DRIVERS_INTEL_MIPI_CAMERA select EC_GOOGLE_CHROMEEC select EC_GOOGLE_CHROMEEC_BOARDID select EC_GOOGLE_CHROMEEC_ESPI diff --git a/src/mainboard/google/rex/variants/rex0/overridetree.cb b/src/mainboard/google/rex/variants/rex0/overridetree.cb index 43707bf85e..55c355eb25 100644 --- a/src/mainboard/google/rex/variants/rex0/overridetree.cb +++ b/src/mainboard/google/rex/variants/rex0/overridetree.cb @@ -198,6 +198,22 @@ chip soc/intel/meteorlake device generic 0 on end end end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{2,2}" # 2 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" + register "cio2_lane_endpoint[1]" = ""^I2C5.CAM1"" + register "cio2_prt[0]" = "4" + register "cio2_prt[1]" = "0" + + device generic 0 on end + end + end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""RTL5682"" @@ -211,7 +227,76 @@ chip soc/intel/meteorlake register "property_list[0].integer" = "1" device i2c 1a on end end - end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "2" + register "ssdb.link_used" = "0" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "2" + register "link_freq[0]" = "720 * MHz" # 720 MHz + register "link_freq[1]" = "360 * MHz" # 360 MHz + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "1" # IMGCLKOUT_1 + register "clk_panel.clks[0].freq" = "1" # FREQ_19_2_MHZ + + register "gpio_panel.gpio[0].gpio_num" = "GPP_C03" #EN_WCAM_SENR_PWR + register "gpio_panel.gpio[1].gpio_num" = "GPP_C04" #EN_WCAM_PWR + register "gpio_panel.gpio[2].gpio_num" = "GPP_V22" #WCAM_RST_L + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 0)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 10)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 10 on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "2" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW9714 VCM"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" + register "vcm_compat" = ""dongwoon,dw9714"" + + device i2c 0C on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""ST M24C64X"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" + register "nvm_compat" = ""atmel,24c64"" + + register "nvm_size" = "0x10000" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x0E" + + device i2c 50 on end + end + end #I2C0 device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""ELAN6918"" @@ -249,7 +334,59 @@ chip soc/intel/meteorlake device i2c 50 on end end end - device ref i2c5 on end + device ref i2c5 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3474"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""Ov 2740 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + register "has_power_resource" = "1" + + register "ssdb.lanes_used" = "2" + register "ssdb.link_used" = "1" + register "num_freq_entries" = "1" + register "link_freq[0]" = "360 * MHz" + register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_A11" #EN_UCAM_SENR_PWR + register "gpio_panel.gpio[1].gpio_num" = "GPP_B09" #EN_FCAM_PWR + register "gpio_panel.gpio[2].gpio_num" = "GPP_V23" #UCAM_RST_L + + #_ON + register "on_seq.ops_cnt" = "4" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(1, 0)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(2, 10)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "1" + register "acpi_name" = ""NVM1"" + register "chip_name" = ""ST M24C64X"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + register "pr0" = ""\\_SB.PCI0.I2C5.CAM1.PRIC"" + + register "nvm_size" = "0x10000" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x10" + register "nvm_compat" = ""atmel,24c64"" + + device i2c 50 on end + end + end #I2C5 device ref pcie_rp5 on # Enable WLAN Card PCIE 5 using clk 5 register "pcie_rp[PCH_RP(5)]" = "{ |