diff options
| -rw-r--r-- | src/mainboard/digitallogic/adl855pc/Config.lb | 2 | ||||
| -rw-r--r-- | src/mainboard/via/epia/Config.lb | 30 | ||||
| -rw-r--r-- | targets/digitallogic/adl855pc/Config.lb | 106 |
3 files changed, 137 insertions, 1 deletions
diff --git a/src/mainboard/digitallogic/adl855pc/Config.lb b/src/mainboard/digitallogic/adl855pc/Config.lb index 62002fdc04..1de157c1e5 100644 --- a/src/mainboard/digitallogic/adl855pc/Config.lb +++ b/src/mainboard/digitallogic/adl855pc/Config.lb @@ -213,7 +213,7 @@ config chip.h northbridge intel/855pm "855pm" # pci 0:0.0 # pci 0:1.0 - southbridge via/vt8231 "vt8231" + southbridge intel/i82801dbm "i82801dbm" # pci 0:11.0 # pci 0:11.1 # pci 0:11.2 diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb index 0450b2b1b9..30bd43b86c 100644 --- a/src/mainboard/via/epia/Config.lb +++ b/src/mainboard/via/epia/Config.lb @@ -227,6 +227,36 @@ northbridge via/vt8601 "vt8601" register "enable_com_ports" = "1" register "enable_keyboard" = "0" register "enable_nvram" = "1" + superio winbond/w83627hf link 1 + pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + pnp 2e.6 off # CIR + pnp 2e.7 off # GAME_MIDI_GIPO1 + pnp 2e.8 off # GPIO2 + pnp 2e.9 off # GPIO3 + pnp 2e.a off # ACPI + pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + register "com1" = "{1}" + # register "com1" = "{1, 0, 0x3f8, 4}" + # register "lpt" = "{1}" + end end end diff --git a/targets/digitallogic/adl855pc/Config.lb b/targets/digitallogic/adl855pc/Config.lb new file mode 100644 index 0000000000..6ff68b77db --- /dev/null +++ b/targets/digitallogic/adl855pc/Config.lb @@ -0,0 +1,106 @@ +# Sample config file for adl855pc +# This will make a target directory of ./adl855pc + +loadoptions + +target adl855pc + +uses ARCH +uses CONFIG_COMPRESS +uses CONFIG_IOAPIC +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses CONFIG_UDELAY_TSC +uses CPU_FIXUP +uses FALLBACK_SIZE +uses HAVE_FALLBACK_BOOT +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses HAVE_HARD_RESET +uses i586 +uses i686 +uses INTEL_PPRO_MTRR +uses HEAP_SIZE +uses IRQ_SLOT_COUNT +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses CONFIG_SMP +uses CONFIG_MAX_CPUS +uses MEMORY_HOLE +uses PAYLOAD_SIZE +uses _RAMBASE +uses _ROMBASE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_OFFSET +uses ROM_SECTION_SIZE +uses ROM_SIZE +uses STACK_SIZE +uses USE_FALLBACK_IMAGE +uses USE_OPTION_TABLE +uses HAVE_OPTION_TABLE +uses MAXIMUM_CONSOLE_LOGLEVEL +uses DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_SERIAL8250 +uses MAINBOARD +uses CONFIG_CHIP_CONFIGURE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses LINUXBIOS_EXTRA_VERSION +uses TTYS0_BAUD + +option TTYS0_BAUD=115200 + +option CONFIG_CHIP_CONFIGURE=1 + +option MAXIMUM_CONSOLE_LOGLEVEL=7 +option DEFAULT_CONSOLE_LOGLEVEL=7 +option CONFIG_CONSOLE_SERIAL8250=1 + +option CPU_FIXUP=1 +option CONFIG_UDELAY_TSC=0 +option i686=1 +option i586=1 +option INTEL_PPRO_MTRR=1 +option ROM_SIZE=256*1024 + +option HAVE_OPTION_TABLE=1 +option CONFIG_ROM_STREAM=1 +option HAVE_FALLBACK_BOOT=1 + +### +### Compute the location and size of where this firmware image +### (linuxBIOS plus bootloader) will live in the boot rom chip. +### +option FALLBACK_SIZE=131072 + +## LinuxBIOS C code runs at this location in RAM +option _RAMBASE=0x00004000 + +# +### +### Compute the start location and size size of +### The linuxBIOS bootloader. +### + +# +romimage "normal" + option USE_FALLBACK_IMAGE=0 + option ROM_IMAGE_SIZE=0x10000 + option LINUXBIOS_EXTRA_VERSION=".0Normal" + mainboard digitallogic/adl855pc +# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf +# payload ../../../../tg3--ide_disk.zelf + payload ../../../../../lnxieepro100.ebi +end + +romimage "fallback" + option USE_FALLBACK_IMAGE=1 + option ROM_IMAGE_SIZE=0x10000 + option LINUXBIOS_EXTRA_VERSION=".0Fallback" + mainboard digitallogic/adl855pc +# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf +# payload ../../../../tg3--ide_disk.zelf + payload ../../../../../lnxieepro100.ebi +end + +buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" |