diff options
150 files changed, 41 insertions, 4723 deletions
diff --git a/src/Kconfig b/src/Kconfig index 06d710851c..67b5689098 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -36,10 +36,6 @@ source src/southbridge/Kconfig source src/superio/Kconfig source src/cpu/Kconfig -config CBFS - bool - default y - config PCI_BUS_SEGN_BITS int default 0 diff --git a/src/arch/i386/Config.lb b/src/arch/i386/Config.lb index 380d05ba4d..e5e587c8f7 100644 --- a/src/arch/i386/Config.lb +++ b/src/arch/i386/Config.lb @@ -1,45 +1,29 @@ -uses CONFIG_CBFS uses CONFIG_SMP uses CONFIG_PRECOMPRESSED_PAYLOAD uses CONFIG_USE_INIT uses CONFIG_HAVE_FAILOVER_BOOT uses CONFIG_USE_FAILOVER_IMAGE uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_CBFS init init/crt0.S.lb -if CONFIG_CBFS - if CONFIG_USE_FAILOVER_IMAGE - else - initobject /src/lib/cbfs.o - initobject /src/lib/lzma.o - end +if CONFIG_USE_FAILOVER_IMAGE +else + initobject /src/lib/cbfs.o + initobject /src/lib/lzma.o end if CONFIG_HAVE_FAILOVER_BOOT if CONFIG_USE_FAILOVER_IMAGE ldscript init/ldscript_failover.lb else - if CONFIG_CBFS ldscript init/ldscript_cbfs.lb - else - ldscript init/ldscript.lb - end end else - if CONFIG_CBFS - if CONFIG_USE_FALLBACK_IMAGE - ldscript init/ldscript_fallback_cbfs.lb - else - ldscript init/ldscript_cbfs.lb - end + if CONFIG_USE_FALLBACK_IMAGE + ldscript init/ldscript_fallback_cbfs.lb else - if CONFIG_USE_FALLBACK_IMAGE - ldscript init/ldscript_fallback.lb - else - ldscript init/ldscript.lb - end + ldscript init/ldscript_cbfs.lb end end @@ -82,13 +66,6 @@ end # catch the case where there is no compression makedefine PAYLOAD-1:=payload -if CONFIG_CBFS -else -# match the case where a compression type is specified. -makedefine PAYLOAD-$(CONFIG_COMPRESSED_PAYLOAD_NRV2B):=payload.nrv2b -makedefine PAYLOAD-$(CONFIG_COMPRESSED_PAYLOAD_LZMA):=payload.lzma -end - # catch the case where there is precompression. Yes, this bites. if CONFIG_PRECOMPRESSED_PAYLOAD makedefine PAYLOAD-1:=payload @@ -105,8 +82,8 @@ if CONFIG_USE_FAILOVER_IMAGE else makerule coreboot.rom depends "coreboot.strip buildrom $(PAYLOAD-1)" - action "PAYLOAD=$(PAYLOAD-1); if [ $(CONFIG_CBFS) -eq 1 ]; then PAYLOAD=/dev/null; touch cbfs-support; fi; ./buildrom $< $@ $$PAYLOAD $(CONFIG_ROM_IMAGE_SIZE) $(CONFIG_ROM_SECTION_SIZE)" - action "if [ $(CONFIG_COMPRESSED_PAYLOAD_LZMA) -eq 1 -a $(CONFIG_CBFS) -eq 1 ]; then echo l > cbfs-support; fi" + action "touch cbfs-support; ./buildrom $< $@ /dev/null $(CONFIG_ROM_IMAGE_SIZE) $(CONFIG_ROM_SECTION_SIZE)" + action "if [ $(CONFIG_COMPRESSED_PAYLOAD_LZMA) -eq 1 ]; then echo l > cbfs-support; fi" end end diff --git a/src/arch/i386/init/crt0.S.lb b/src/arch/i386/init/crt0.S.lb index 9e8968510d..95764ae596 100644 --- a/src/arch/i386/init/crt0.S.lb +++ b/src/arch/i386/init/crt0.S.lb @@ -74,19 +74,8 @@ __main: movl $0x4000000, %esp movl %esp, %ebp pushl %esi -#if CONFIG_CBFS == 1 pushl $str_coreboot_ram_name call cbfs_and_run_core -#else - movl $_liseg, %esi - movl $_iseg, %edi - movl $_eiseg, %ecx - subl %edi, %ecx - pushl %ecx - pushl %edi - pushl %esi - call copy_and_run_core -#endif .Lhlt: intel_chip_post_macro(0xee) /* post fe */ @@ -148,12 +137,10 @@ str_pre_main: .string "Jumping to coreboot.\r\n" #endif /* ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG */ -#if CONFIG_CBFS == 1 -# if CONFIG_USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 str_coreboot_ram_name: .string "fallback/coreboot_ram" -# else +#else str_coreboot_ram_name: .string "normal/coreboot_ram" -# endif #endif #endif /* CONFIG_USE_DCACHE_RAM */ diff --git a/src/arch/i386/init/ldscript.lb b/src/arch/i386/init/ldscript.lb deleted file mode 100644 index 0ed5c47f53..0000000000 --- a/src/arch/i386/init/ldscript.lb +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Memory map: - * - * CONFIG_RAMBASE - * : data segment - * : bss segment - * : heap - * : stack - * CONFIG_ROMBASE - * : coreboot text - * : readonly text - */ -/* - * Bootstrap code for the STPC Consumer - * Copyright (c) 1999 by Net Insight AB. All Rights Reserved. - * - */ - -/* - * Written by Johan Rydberg, based on work by Daniel Kahlin. - * Rewritten by Eric Biederman - */ -/* - * We use ELF as output format. So that we can - * debug the code in some form. - */ -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) - -/* -ENTRY(_start) -*/ - -TARGET(binary) -INPUT(coreboot_ram.rom) -SECTIONS -{ - . = CONFIG_ROMBASE; - - .ram . : { - _ram = . ; - coreboot_ram.rom(*) - _eram = . ; - } - - /* This section might be better named .setup */ - .rom . : { - _rom = .; - *(.rom.text); - *(.rom.data); - *(.rodata.*); - *(.rom.data.*); - . = ALIGN(16); - _erom = .; - } - - _lrom = LOADADDR(.rom); - _elrom = LOADADDR(.rom) + SIZEOF(.rom); - _iseg = CONFIG_RAMBASE; - _eiseg = _iseg + SIZEOF(.ram); - _liseg = _ram; - _eliseg = _eram; - - /DISCARD/ : { - *(.comment) - *(.comment.*) - *(.note) - *(.note.*) - } -} diff --git a/src/arch/i386/init/ldscript_fallback.lb b/src/arch/i386/init/ldscript_fallback.lb deleted file mode 100644 index 6d41cbde87..0000000000 --- a/src/arch/i386/init/ldscript_fallback.lb +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Memory map: - * - * CONFIG_RAMBASE - * : data segment - * : bss segment - * : heap - * : stack - * CONFIG_ROMBASE - * : coreboot text - * : readonly text - */ -/* - * Bootstrap code for the STPC Consumer - * Copyright (c) 1999 by Net Insight AB. All Rights Reserved. - * - */ - -/* - * Written by Johan Rydberg, based on work by Daniel Kahlin. - * Rewritten by Eric Biederman - */ -/* - * We use ELF as output format. So that we can - * debug the code in some form. - */ -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) - -/* -ENTRY(_start) -*/ - -TARGET(binary) -INPUT(coreboot_ram.rom) -SECTIONS -{ - . = CONFIG_ROMBASE; - - .ram . : { - _ram = . ; - coreboot_ram.rom(*) - _eram = . ; - } - - /* cut _start into last 64k*/ - _x = .; - . = (_x < (CONFIG_ROMBASE - 0x10000 + CONFIG_ROM_IMAGE_SIZE)) ? (CONFIG_ROMBASE - 0x10000 + CONFIG_ROM_IMAGE_SIZE) : _x; - - /* This section might be better named .setup */ - .rom . : { - _rom = .; - *(.rom.text); - *(.rom.data); - *(.init.rodata.*); - *(.rodata.*); - *(.rom.data.*); - . = ALIGN(16); - _erom = .; - } - - _lrom = LOADADDR(.rom); - _elrom = LOADADDR(.rom) + SIZEOF(.rom); - _iseg = CONFIG_RAMBASE; - _eiseg = _iseg + SIZEOF(.ram); - _liseg = _ram; - _eliseg = _eram; - - /DISCARD/ : { - *(.comment) - *(.note) - *(.comment.*) - *(.note.*) - } -} diff --git a/src/arch/i386/lib/Config.lb b/src/arch/i386/lib/Config.lb index 0a07e3b9be..1d434e24a4 100644 --- a/src/arch/i386/lib/Config.lb +++ b/src/arch/i386/lib/Config.lb @@ -1,7 +1,6 @@ uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR uses CONFIG_USE_FAILOVER_IMAGE -uses CONFIG_CBFS object c_start.S object cpu.c @@ -15,9 +14,5 @@ initobject printk_init.o if CONFIG_USE_FAILOVER_IMAGE else - if CONFIG_CBFS - initobject cbfs_and_run.o - else - initobject copy_and_run.o - end + initobject cbfs_and_run.o end diff --git a/src/arch/i386/lib/copy_and_run.c b/src/arch/i386/lib/copy_and_run.c deleted file mode 100644 index 9cec90a81c..0000000000 --- a/src/arch/i386/lib/copy_and_run.c +++ /dev/null @@ -1,53 +0,0 @@ -/* by yhlu 6.2005 - moved from nrv2v.c and some lines from crt0.S - 2006/05/02 - stepan: move nrv2b to an extra file. -*/ - -#include <console/console.h> -#include <stdint.h> -#include <string.h> - -#if CONFIG_COMPRESS -#define ENDIAN 0 -#define BITSIZE 32 -#include "../lib/nrv2b.c" -#endif - -void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp) -{ - unsigned long olen; - -#if CONFIG_USE_INIT - printk_spew("src=%08x\r\n",src); - printk_spew("dst=%08x\r\n",dst); -#else - print_spew("src="); print_spew_hex32((uint32_t)src); print_spew("\r\n"); - print_spew("dst="); print_spew_hex32((uint32_t)dst); print_spew("\r\n"); -#endif - -#if !CONFIG_COMPRESS - print_debug("Copying image to RAM.\r\n"); - memcpy(src, dst, ilen); - olen = ilen; -#else - print_debug("Uncompressing image to RAM.\r\n"); -// dump_mem(src, src+0x100); - olen = unrv2b(src, dst, &ilen); -#endif - -// dump_mem(dst, dst+0x100); -#if CONFIG_USE_INIT - printk_spew("image length = %08x\r\n", olen); -#else - print_spew("image length = "); print_spew_hex32(olen); print_spew("\r\n"); -#endif - print_debug("Jumping to image.\r\n"); - - __asm__ volatile ( - "movl %%eax, %%ebp\n\t" - "cli\n\t" - "jmp *%%edi\n\t" - :: "a"(ebp), "D"(dst) - ); - -} diff --git a/src/arch/ppc/Config.lb b/src/arch/ppc/Config.lb index aba64c1f98..0b06eef37e 100644 --- a/src/arch/ppc/Config.lb +++ b/src/arch/ppc/Config.lb @@ -1,4 +1,3 @@ -uses CONFIG_CBFS ldscript init/ldscript.lb makerule coreboot.strip @@ -11,10 +10,8 @@ makerule coreboot.rom action "cp $< $@" end -if CONFIG_CBFS - initobject /src/lib/cbfs.o - initobject /src/lib/lzma.o -end +initobject /src/lib/cbfs.o +initobject /src/lib/lzma.o dir init dir lib diff --git a/src/boot/Config.lb b/src/boot/Config.lb index 700f19d917..8afe637e51 100644 --- a/src/boot/Config.lb +++ b/src/boot/Config.lb @@ -1,9 +1,2 @@ object hardwaremain.o -if CONFIG_CBFS - object selfboot.o -else - object elfboot.o -end -if CONFIG_FS_PAYLOAD - object filo.o -end +object selfboot.o diff --git a/src/boot/elfboot.c b/src/boot/elfboot.c deleted file mode 100644 index 958112d669..0000000000 --- a/src/boot/elfboot.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Eric W. Biederman <ebiederm@xmission.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA - */ - -#include <console/console.h> -#include <part/fallback_boot.h> -#include <boot/elf.h> -#include <boot/elf_boot.h> -#include <boot/coreboot_tables.h> -#include <ip_checksum.h> -#include <stream/read_bytes.h> -#include <stdint.h> -#include <stdlib.h> -#include <string.h> - -/* Maximum physical address we can use for the coreboot bounce buffer. - */ -#ifndef MAX_ADDR -#define MAX_ADDR -1UL -#endif - -extern unsigned char _ram_seg; -extern unsigned char _eram_seg; - -struct segment { - struct segment *next; - struct segment *prev; - struct segment *phdr_next; - struct segment *phdr_prev; - unsigned long s_addr; - unsigned long s_memsz; - unsigned long s_offset; - unsigned long s_filesz; -}; - -struct verify_callback { - struct verify_callback *next; - int (*callback)(struct verify_callback *vcb, - Elf_ehdr *ehdr, Elf_phdr *phdr, struct segment *head); - unsigned long desc_offset; - unsigned long desc_addr; -}; - -struct ip_checksum_vcb { - struct verify_callback data; - unsigned short ip_checksum; -}; - -int verify_ip_checksum( - struct verify_callback *vcb, - Elf_ehdr *ehdr, Elf_phdr *phdr, struct segment *head) -{ - struct ip_checksum_vcb *cb; - struct segment *ptr; - unsigned long bytes; - unsigned long checksum; - unsigned char buff[2], *n_desc; - cb = (struct ip_checksum_vcb *)vcb; - /* zero the checksum so it's value won't - * get in the way of verifying the checksum. - */ - n_desc = 0; - if (vcb->desc_addr) { - n_desc = (unsigned char *)(vcb->desc_addr); - memcpy(buff, n_desc, 2); - memset(n_desc, 0, 2); - } - bytes = 0; - checksum = compute_ip_checksum(ehdr, sizeof(*ehdr)); - bytes += sizeof(*ehdr); - checksum = add_ip_checksums(bytes, checksum, - compute_ip_checksum(phdr, ehdr->e_phnum*sizeof(*phdr))); - bytes += ehdr->e_phnum*sizeof(*phdr); - for(ptr = head->phdr_next; ptr != head; ptr = ptr->phdr_next) { - checksum = add_ip_checksums(bytes, checksum, - compute_ip_checksum((void *)ptr->s_addr, ptr->s_memsz)); - bytes += ptr->s_memsz; - } - if (n_desc != 0) { - memcpy(n_desc, buff, 2); - } - if (checksum != cb->ip_checksum) { - printk_err("Image checksum: %04x != computed checksum: %04lx\n", - cb->ip_checksum, checksum); - } - return checksum == cb->ip_checksum; -} - -/* The problem: - * Static executables all want to share the same addresses - * in memory because only a few addresses are reliably present on - * a machine, and implementing general relocation is hard. - * - * The solution: - * - Allocate a buffer the size of the coreboot image plus additional - * required space. - * - Anything that would overwrite coreboot copy into the lower part of - * the buffer. - * - After loading an ELF image copy coreboot to the top of the buffer. - * - Then jump to the loaded image. - * - * Benefits: - * - Nearly arbitrary standalone executables can be loaded. - * - Coreboot is preserved, so it can be returned to. - * - The implementation is still relatively simple, - * and much simpler then the general case implemented in kexec. - * - */ - -static unsigned long bounce_size; - -static unsigned long get_bounce_buffer(struct lb_memory *mem) -{ - unsigned long lb_size; - unsigned long mem_entries; - unsigned long buffer; - int i; - lb_size = (unsigned long)(&_eram_seg - &_ram_seg); - /* Double coreboot size so I have somewhere to place a copy to return to */ - bounce_size = lb_size; - lb_size = bounce_size + lb_size; - mem_entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]); - buffer = 0; - for(i = 0; i < mem_entries; i++) { - unsigned long mstart, mend; - unsigned long msize; - unsigned long tbuffer; - if (mem->map[i].type != LB_MEM_RAM) - continue; - if (unpack_lb64(mem->map[i].start) > MAX_ADDR) - continue; - if (unpack_lb64(mem->map[i].size) < lb_size) - continue; - mstart = unpack_lb64(mem->map[i].start); - msize = MAX_ADDR - mstart +1; - if (msize > unpack_lb64(mem->map[i].size)) - msize = unpack_lb64(mem->map[i].size); - mend = mstart + msize; - tbuffer = mend - lb_size; - if (tbuffer < buffer) - continue; - buffer = tbuffer; - } - return buffer; -} - - -static struct verify_callback *process_elf_notes( - unsigned char *header, - unsigned long offset, unsigned long length) -{ - struct verify_callback *cb_chain; - unsigned char *note, *end; - unsigned char *program, *version; - - cb_chain = 0; - note = header + offset; - end = note + length; - program = version = 0; - while(note < end) { - Elf_Nhdr *hdr; - unsigned char *n_name, *n_desc, *next; - hdr = (Elf_Nhdr *)note; - n_name = note + sizeof(*hdr); - n_desc = n_name + ((hdr->n_namesz + 3) & ~3); - next = n_desc + ((hdr->n_descsz + 3) & ~3); - if (next > end) { - break; - } - if ((hdr->n_namesz == sizeof(ELF_NOTE_BOOT)) && - (memcmp(n_name, ELF_NOTE_BOOT, sizeof(ELF_NOTE_BOOT)) == 0)) { - switch(hdr->n_type) { - case EIN_PROGRAM_NAME: - if (n_desc[hdr->n_descsz -1] == 0) { - program = n_desc; - } - break; - case EIN_PROGRAM_VERSION: - if (n_desc[hdr->n_descsz -1] == 0) { - version = n_desc; - } - break; - case EIN_PROGRAM_CHECKSUM: - { - struct ip_checksum_vcb *cb; - cb = malloc(sizeof(*cb)); - cb->ip_checksum = *((uint16_t *)n_desc); - cb->data.callback = verify_ip_checksum; - cb->data.next = cb_chain; - cb->data.desc_offset = n_desc - header; - cb_chain = &cb->data; - break; - } - } - } - printk_spew("n_type: %08x n_name(%d): %-*.*s n_desc(%d): %-*.*s\n", - hdr->n_type, - hdr->n_namesz, hdr->n_namesz, hdr->n_namesz, n_name, - hdr->n_descsz,hdr->n_descsz, hdr->n_descsz, n_desc); - note = next; - } - if (program && version) { - printk_info("Loading %s version: %s\n", - program, version); - } - return cb_chain; -} - -static int valid_area(struct lb_memory *mem, unsigned long buffer, - unsigned long start, unsigned long len) -{ - /* Check through all of the memory segments and ensure - * the segment that was passed in is completely contained - * in RAM. - */ - int i; - unsigned long end = start + len; - unsigned long mem_entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]); - - /* See if I conflict with the bounce buffer */ - if (end >= buffer) { - return 0; - } - - /* Walk through the table of valid memory ranges and see if I - * have a match. - */ - for(i = 0; i < mem_entries; i++) { - uint64_t mstart, mend; - uint32_t mtype; - mtype = mem->map[i].type; - mstart = unpack_lb64(mem->map[i].start); - mend = mstart + unpack_lb64(mem->map[i].size); - if ((mtype == LB_MEM_RAM) && (start < mend) && (end > mstart)) { - break; - } - if ((mtype == LB_MEM_TABLE) && (start < mend) && (end > mstart)) { - printk_err("Payload is overwriting Coreboot tables.\n"); - break; - } - } - if (i == mem_entries) { - printk_err("No matching ram area found for range:\n"); - printk_err(" [0x%016lx, 0x%016lx)\n", start, end); - printk_err("Ram areas\n"); - for(i = 0; i < mem_entries; i++) { - uint64_t mstart, mend; - uint32_t mtype; - mtype = mem->map[i].type; - mstart = unpack_lb64(mem->map[i].start); - mend = mstart + unpack_lb64(mem->map[i].size); - printk_err(" [0x%016lx, 0x%016lx) %s\n", - (unsigned long)mstart, - (unsigned long)mend, - (mtype == LB_MEM_RAM)?"RAM":"Reserved"); - - } - return 0; - } - return 1; -} - -static void relocate_segment(unsigned long buffer, struct segment *seg) -{ - /* Modify all segments that want to load onto coreboot - * to load onto the bounce buffer instead. - */ - unsigned long lb_start = (unsigned long)&_ram_seg; - unsigned long lb_end = (unsigned long)&_eram_seg; - unsigned long start, middle, end; - - printk_spew("lb: [0x%016lx, 0x%016lx)\n", - lb_start, lb_end); - - start = seg->s_addr; - middle = start + seg->s_filesz; - end = start + seg->s_memsz; - /* I don't conflict with coreboot so get out of here */ - if ((end <= lb_start) || (start >= lb_end)) - return; - - printk_spew("segment: [0x%016lx, 0x%016lx, 0x%016lx)\n", - start, middle, end); - - /* Slice off a piece at the beginning - * that doesn't conflict with coreboot. - */ - if (start < lb_start) { - struct segment *new; - unsigned long len = lb_start - start; - new = malloc(sizeof(*new)); - *new = *seg; - new->s_memsz = len; - seg->s_memsz -= len; - seg->s_addr += len; - seg->s_offset += len; - if (seg->s_filesz > len) { - new->s_filesz = len; - seg->s_filesz -= len; - } else { - seg->s_filesz = 0; - } - - /* Order by stream offset */ - new->next = seg; - new->prev = seg->prev; - seg->prev->next = new; - seg->prev = new; - /* Order by original program header order */ - new->phdr_next = seg; - new->phdr_prev = seg->phdr_prev; - seg->phdr_prev->phdr_next = new; - seg->phdr_prev = new; - - /* compute the new value of start */ - start = seg->s_addr; - - printk_spew(" early: [0x%016lx, 0x%016lx, 0x%016lx)\n", - new->s_addr, - new->s_addr + new->s_filesz, - new->s_addr + new->s_memsz); - } - - /* Slice off a piece at the end - * that doesn't conflict with coreboot - */ - if (end > lb_end) { - unsigned long len = lb_end - start; - struct segment *new; - new = malloc(sizeof(*new)); - *new = *seg; - seg->s_memsz = len; - new->s_memsz -= len; - new->s_addr += len; - new->s_offset += len; - if (seg->s_filesz > len) { - seg->s_filesz = len; - new->s_filesz -= len; - } else { - new->s_filesz = 0; - } - /* Order by stream offset */ - new->next = seg->next; - new->prev = seg; - seg->next->prev = new; - seg->next = new; - /* Order by original program header order */ - new->phdr_next = seg->phdr_next; - new->phdr_prev = seg; - seg->phdr_next->phdr_prev = new; - seg->phdr_next = new; - - printk_spew(" late: [0x%016lx, 0x%016lx, 0x%016lx)\n", - new->s_addr, - new->s_addr + new->s_filesz, - new->s_addr + new->s_memsz); - - } - /* Now retarget this segment onto the bounce buffer */ - seg->s_addr = buffer + (seg->s_addr - lb_start); - - printk_spew(" bounce: [0x%016lx, 0x%016lx, 0x%016lx)\n", - seg->s_addr, - seg->s_addr + seg->s_filesz, - seg->s_addr + seg->s_memsz); -} - - -static int build_elf_segment_list( - struct segment *head, - unsigned long bounce_buffer, struct lb_memory *mem, - Elf_phdr *phdr, int headers) -{ - struct segment *ptr; - int i; - memset(head, 0, sizeof(*head)); - head->phdr_next = head->phdr_prev = head; - head->next = head->prev = head; - for(i = 0; i < headers; i++) { - struct segment *new; - /* Ignore data that I don't need to handle */ - if (phdr[i].p_type != PT_LOAD) { - printk_debug("Dropping non PT_LOAD segment\n"); - continue; - } - if (phdr[i].p_memsz == 0) { - printk_debug("Dropping empty segment\n"); - continue; - } - new = malloc(sizeof(*new)); - new->s_addr = phdr[i].p_paddr; - new->s_memsz = phdr[i].p_memsz; - new->s_offset = phdr[i].p_offset; - new->s_filesz = phdr[i].p_filesz; - printk_debug("New segment addr 0x%lx size 0x%lx offset 0x%lx filesize 0x%lx\n", - new->s_addr, new->s_memsz, new->s_offset, new->s_filesz); - /* Clean up the values */ - if (new->s_filesz > new->s_memsz) { - new->s_filesz = new->s_memsz; - } - printk_debug("(cleaned up) New segment addr 0x%lx size 0x%lx offset 0x%lx filesize 0x%lx\n", - new->s_addr, new->s_memsz, new->s_offset, new->s_filesz); - for(ptr = head->next; ptr != head; ptr = ptr->next) { - if (new->s_offset < ptr->s_offset) - break; - } - /* Order by stream offset */ - new->next = ptr; - new->prev = ptr->prev; - ptr->prev->next = new; - ptr->prev = new; - /* Order by original program header order */ - new->phdr_next = head; - new->phdr_prev = head->phdr_prev; - head->phdr_prev->phdr_next = new; - head->phdr_prev = new; - - /* Verify the memory addresses in the segment are valid */ - if (!valid_area(mem, bounce_buffer, new->s_addr, new->s_memsz)) - goto out; - - /* Modify the segment to load onto the bounce_buffer if necessary. - */ - relocate_segment(bounce_buffer, new); - } - return 1; - out: - return 0; -} - -static int load_elf_segments( - struct segment *head, unsigned char *header, unsigned long header_size) -{ - unsigned long offset; - struct segment *ptr; - - offset = 0; - for(ptr = head->next; ptr != head; ptr = ptr->next) { - unsigned long start_offset; - unsigned long skip_bytes, read_bytes; - unsigned char *dest, *middle, *end; - byte_offset_t result; - printk_debug("Loading Segment: addr: 0x%016lx memsz: 0x%016lx filesz: 0x%016lx\n", - ptr->s_addr, ptr->s_memsz, ptr->s_filesz); - - /* Compute the boundaries of the segment */ - dest = (unsigned char *)(ptr->s_addr); - end = dest + ptr->s_memsz; - middle = dest + ptr->s_filesz; - start_offset = ptr->s_offset; - /* Ignore s_offset if I have a pure bss segment */ - if (ptr->s_filesz == 0) { - start_offset = offset; - } - - printk_spew("[ 0x%016lx, %016lx, 0x%016lx) <- %016lx\n", - (unsigned long)dest, - (unsigned long)middle, - (unsigned long)end, - (unsigned long)start_offset); - - /* Skip intial buffer unused bytes */ - if (offset < header_size) { - if (start_offset < header_size) { - offset = start_offset; - } else { - offset = header_size; - } - } - - /* Skip the unused bytes */ - skip_bytes = start_offset - offset; - if (skip_bytes && - ((result = stream_skip(skip_bytes)) != skip_bytes)) { - printk_err("ERROR: Skip of %ld bytes skipped %ld bytes\n", - skip_bytes, result); - goto out; - } - offset = start_offset; - - /* Copy data from the initial buffer */ - if (offset < header_size) { - size_t len; - if ((ptr->s_filesz + start_offset) > header_size) { - len = header_size - start_offset; - } - else { - len = ptr->s_filesz; - } - memcpy(dest, &header[start_offset], len); - dest += len; - } - - /* Read the segment into memory */ - read_bytes = middle - dest; - if (read_bytes && - ((result = stream_read(dest, read_bytes)) != read_bytes)) { - printk_err("ERROR: Read of %ld bytes read %ld bytes...\n", - read_bytes, result); - goto out; - } - offset += ptr->s_filesz; - - /* Zero the extra bytes between middle & end */ - if (middle < end) { - printk_debug("Clearing Segment: addr: 0x%016lx memsz: 0x%016lx\n", - (unsigned long)middle, (unsigned long)(end - middle)); - - /* Zero the extra bytes */ - memset(middle, 0, end - middle); - } - } - return 1; - out: - return 0; -} - -static int verify_loaded_image( - struct verify_callback *vcb, - Elf_ehdr *ehdr, Elf_phdr *phdr, - struct segment *head - ) -{ - struct segment *ptr; - int ok; - ok = 1; - for(; ok && vcb ; vcb = vcb->next) { - /* Find where the note is loaded */ - /* The whole note must be loaded intact - * so an address of 0 for the descriptor is impossible - */ - vcb->desc_addr = 0; - for(ptr = head->next; ptr != head; ptr = ptr->next) { - unsigned long desc_addr; - desc_addr = ptr->s_addr + vcb->desc_offset - ptr->s_offset; - if ((desc_addr >= ptr->s_addr) && - (desc_addr < (ptr->s_addr + ptr->s_filesz))) { - vcb->desc_addr = desc_addr; - } - } - ok = vcb->callback(vcb, ehdr, phdr, head); - } - return ok; -} - -int elfload(struct lb_memory *mem, - unsigned char *header, unsigned long header_size) -{ - Elf_ehdr *ehdr; - Elf_phdr *phdr; - void *entry; - struct segment head; - struct verify_callback *cb_chain; - unsigned long bounce_buffer; - - /* Find a bounce buffer so I can load to coreboot's current location */ - bounce_buffer = get_bounce_buffer(mem); - if (!bounce_buffer) { - printk_err("Could not find a bounce buffer...\n"); - goto out; - } - - ehdr = (Elf_ehdr *)header; - entry = (void *)(ehdr->e_entry); - phdr = (Elf_phdr *)(&header[ehdr->e_phoff]); - - /* Digest elf note information... */ - cb_chain = 0; - if ((phdr[0].p_type == PT_NOTE) && - ((phdr[0].p_offset + phdr[0].p_filesz) < header_size)) { - cb_chain = process_elf_notes(header, - phdr[0].p_offset, phdr[0].p_filesz); - } - - /* Preprocess the elf segments */ - if (!build_elf_segment_list(&head, - bounce_buffer, mem, phdr, ehdr->e_phnum)) - goto out; - - /* Load the segments */ - if (!load_elf_segments(&head, header, header_size)) - goto out; - - printk_spew("Loaded segments\n"); - /* Verify the loaded image */ - if (!verify_loaded_image(cb_chain, ehdr, phdr, &head)) - goto out; - - printk_spew("verified segments\n"); - /* Shutdown the stream device */ - stream_fini(); - - printk_spew("closed down stream\n"); - /* Reset to booting from this image as late as possible */ - boot_successful(); - - printk_debug("Jumping to boot code at %p\n", entry); - post_code(0xfe); - - /* Jump to kernel */ - jmp_to_elf_entry(entry, bounce_buffer, bounce_size); - return 1; - - out: - return 0; -} - -int elfboot(struct lb_memory *mem) -{ - Elf_ehdr *ehdr; - static unsigned char header[ELF_HEAD_SIZE]; - int header_offset; - int i, result; - - result = 0; - printk_debug("\nelfboot: Attempting to load payload.\n"); - post_code(0xf8); - - if (stream_init() < 0) { - printk_err("Could not initialize driver...\n"); - goto out; - } - - /* Read in the initial ELF_HEAD_SIZE bytes */ - if (stream_read(header, ELF_HEAD_SIZE) != ELF_HEAD_SIZE) { - printk_err("Read failed...\n"); - goto out; - } - /* Scan for an elf header */ - header_offset = -1; - for(i = 0; i < ELF_HEAD_SIZE - (sizeof(Elf_ehdr) + sizeof(Elf_phdr)); i+=16) { - ehdr = (Elf_ehdr *)(&header[i]); - if (memcmp(ehdr->e_ident, ELFMAG, 4) != 0) { - printk_debug("No header at %d\n", i); - continue; - } - printk_debug("Found ELF candidate at offset %d\n", i); - /* Sanity check the elf header */ - if ((ehdr->e_type == ET_EXEC) && - elf_check_arch(ehdr) && - (ehdr->e_ident[EI_VERSION] == EV_CURRENT) && - (ehdr->e_version == EV_CURRENT) && - (ehdr->e_ehsize == sizeof(Elf_ehdr)) && - (ehdr->e_phentsize = sizeof(Elf_phdr)) && - (ehdr->e_phoff < (ELF_HEAD_SIZE - i)) && - ((ehdr->e_phoff + (ehdr->e_phentsize * ehdr->e_phnum)) <= - (ELF_HEAD_SIZE - i))) { - header_offset = i; - break; - } - ehdr = 0; - } - printk_debug("header_offset is %d\n", header_offset); - if (header_offset == -1) { - goto out; - } - - printk_debug("Try to load at offset 0x%x\n", header_offset); - result = elfload(mem, - header + header_offset , ELF_HEAD_SIZE - header_offset); - out: - if (!result) { - /* Shutdown the stream device */ - stream_fini(); - - printk_err("Can not load ELF Image.\n"); - - post_code(0xff); - } - return 0; - -} diff --git a/src/boot/filo.c b/src/boot/filo.c deleted file mode 100644 index d6ee9305e9..0000000000 --- a/src/boot/filo.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * Copyright (C) 2003 by SONE Takeshi <ts1@tsn.or.jp> and others. - * This program is licensed under the terms of GNU General Public License. - * - * Modified for coreboot by Greg Watson <gwatson@lanl.gov> - */ - -#include <console/console.h> -#include <delay.h> -#include <string.h> -#include <boot/tables.h> -#include <boot/elf.h> - -#define ENTER '\r' -#define ESCAPE '\x1b' - -#ifndef CONFIG_AUTOBOOT_CMDLINE -#define autoboot(mem) -#endif - -#if !CONFIG_AUTOBOOT_DELAY -#define autoboot_delay() 0 /* success */ -#endif - -#define havechar() console_tst_byte() -#define putchar(c) console_tx_byte(c) -#define getchar(c) console_rx_byte(c) - -extern char *boot_file; - -int getline(char *buf, int max) -{ - int cur, ch, nonspace_seen; - - cur = 0; - while (buf[cur]) { - putchar(buf[cur]); - cur++; - } - for (;;) { - ch = getchar(); - switch (ch) { - /* end of line */ - case '\r': - case '\n': - putchar('\n'); - goto out; - /* backspace */ - case '\b': - case '\x7f': - if (cur > 0) { - cur--; - putchar('\b'); - putchar(' '); - putchar('\b'); - } - break; - /* word erase */ - case 'W' & 0x1f: /* ^W */ - nonspace_seen = 0; - while (cur) { - if (buf[cur-1] != ' ') - nonspace_seen = 1; - putchar('\b'); - putchar(' '); - putchar('\b'); - cur--; - if (nonspace_seen && cur < max-1 && cur > 0 && buf[cur-1]==' ') - break; - } - break; - /* line erase */ - case 'U' & 0x1f: /* ^U */ - while (cur) { - putchar('\b'); - putchar(' '); - putchar('\b'); - cur--; - } - cur = 0; - break; - default: - if (ch < 0x20) - break; /* ignore control char */ - if (ch >= 0x7f) - break; - if (cur + 1 < max) { - putchar(ch); /* echo back */ - buf[cur] = ch; - cur++; - } - } - } -out: - if (cur >= max) - cur = max - 1; - buf[cur] = '\0'; - return cur; -} - -static void boot(struct lb_memory *mem, const char *line) -{ - char *param; - - /* Split filename and parameter */ - boot_file = strdup(line); - param = strchr(boot_file, ' '); - if (param) { - *param = '\0'; - param++; - } - - if (!elfboot(mem)) - printk_info("Unsupported image format\n"); - free(boot_file); -} - -#ifdef CONFIG_AUTOBOOT_CMDLINE -#if CONFIG_AUTOBOOT_DELAY -static inline int autoboot_delay(void) -{ - unsigned int timeout; - int sec, tmp; - char key; - - key = 0; - - printk_info("Press <Enter> for default boot, or <Esc> for boot prompt... "); - for (sec = CONFIG_AUTOBOOT_DELAY; sec>0 && key==0; sec--) { - printk_info("%d", sec); - timeout = 10; - while (timeout-- > 0) { - if (havechar()) { - key = getchar(); - if (key==ENTER || key==ESCAPE) - break; - } - mdelay(100); - } - for (tmp = sec; tmp; tmp /= 10) - printk_info("\b \b"); - } - if (key == 0) { - printk_info("timed out\n"); - return 0; /* success */ - } else { - putchar('\n'); - if (key == ESCAPE) - return -1; /* canceled */ - else - return 0; /* default accepted */ - } -} -#endif /* CONFIG_AUTOBOOT_DELAY */ - -static void autoboot(struct lb_memory *mem) -{ - /* If Escape key is pressed already, skip autoboot */ - if (havechar() && getchar()==ESCAPE) - return; - - if (autoboot_delay()==0) { - printk_info("boot: %s\n", CONFIG_AUTOBOOT_CMDLINE); - boot(mem, CONFIG_AUTOBOOT_CMDLINE); - } -} -#endif /* CONFIG_AUTOBOOT_CMDLINE */ - -/* The main routine */ -int filo(struct lb_memory *mem) -{ - char line[256]; - - printk_info("FILO version 0.4.1\n"); - - /* Try default image */ - autoboot(mem); - - /* The above didn't work, ask user */ - while (havechar()) - getchar(); -#ifdef CONFIG_AUTOBOOT_CMDLINE - strncpy(line, CONFIG_AUTOBOOT_CMDLINE, sizeof(line)-1); - line[sizeof(line)-1] = '\0'; -#else - line[0] = '\0'; -#endif - for (;;) { - printk_info("boot: "); - getline(line, sizeof line); - if (line[0]) - boot(mem, line); - } -} diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c index a0543401ed..5ab14fb09a 100644 --- a/src/boot/hardwaremain.c +++ b/src/boot/hardwaremain.c @@ -96,21 +96,10 @@ void hardwaremain(int boot_complete) * write our configuration tables. */ lb_mem = write_tables(); -#if CONFIG_CBFS == 1 -# if CONFIG_USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 cbfs_load_payload(lb_mem, "fallback/payload"); -# else - cbfs_load_payload(lb_mem, "normal/payload"); -# endif -#else - -#if CONFIG_FS_PAYLOAD == 1 -#warning "CONFIG_FS_PAYLOAD is deprecated." - filo(lb_mem); #else -#warning "elfboot will soon be deprecated." - elfboot(lb_mem); -#endif + cbfs_load_payload(lb_mem, "normal/payload"); #endif printk(BIOS_ERR, "Boot failed.\n"); } diff --git a/src/config/Config.lb b/src/config/Config.lb index 061c0b21a8..8c954d20bb 100644 --- a/src/config/Config.lb +++ b/src/config/Config.lb @@ -215,7 +215,6 @@ end # for now, this is just 'lib', but it may be more later. dir /lib dir /console -dir /stream dir /devices dir /pc80 dir /boot diff --git a/src/config/Options.lb b/src/config/Options.lb index db1a20fa91..071362a596 100644 --- a/src/config/Options.lb +++ b/src/config/Options.lb @@ -641,11 +641,6 @@ define CONFIG_MULTIBOOT export always comment "Use Multiboot (rather than ELF boot notes) to boot the payload" end -define CONFIG_IDE_PAYLOAD - default 0 - export always - comment "Boot from IDE device" -end define CONFIG_ROM_PAYLOAD default 0 export always @@ -672,47 +667,6 @@ define CONFIG_PRECOMPRESSED_PAYLOAD export always comment "boot image is already compressed" end -define CONFIG_SERIAL_PAYLOAD - default 0 - export always - comment "Download boot image from serial port" -end -define CONFIG_FS_PAYLOAD - default 0 - export always - comment "Boot from a filesystem" -end -define CONFIG_FS_EXT2 - default 0 - export always - comment "Enable ext2 filesystem support" -end -define CONFIG_FS_ISO9660 - default 0 - export always - comment "Enable ISO9660 filesystem support" -end -define CONFIG_FS_FAT - default 0 - export always - comment "Enable FAT filesystem support" -end -define CONFIG_CBFS - default 1 - export always - comment "The new CBFS file system" -end -define CONFIG_AUTOBOOT_DELAY - default 2 - export always - comment "Delay (in seconds) before autobooting" -end -define CONFIG_AUTOBOOT_CMDLINE - default "hdc1:/vmlinuz root=/dev/hdc3 console=tty0 console=ttyS0,115200" - export always - format "\"%s\"" - comment "Default command line when autobooting" -end define CONFIG_USE_WATCHDOG_ON_BOOT default 0 diff --git a/src/config/failovercalculation.lb b/src/config/failovercalculation.lb index 7626289e2d..e5ec7e19ce 100644 --- a/src/config/failovercalculation.lb +++ b/src/config/failovercalculation.lb @@ -10,13 +10,8 @@ else default CONFIG_ROM_SECTION_SIZE = CONFIG_FALLBACK_SIZE default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE ) else - if CONFIG_CBFS - default CONFIG_ROM_SECTION_SIZE = CONFIG_FALLBACK_SIZE - default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE ) - else - default CONFIG_ROM_SECTION_SIZE = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE ) - default CONFIG_ROM_SECTION_OFFSET = 0 - end + default CONFIG_ROM_SECTION_SIZE = CONFIG_FALLBACK_SIZE + default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE ) end end diff --git a/src/config/nofailovercalculation.lb b/src/config/nofailovercalculation.lb index 82132f4acb..f5f8708b65 100644 --- a/src/config/nofailovercalculation.lb +++ b/src/config/nofailovercalculation.lb @@ -6,13 +6,8 @@ if CONFIG_USE_FALLBACK_IMAGE default CONFIG_ROM_SECTION_SIZE = CONFIG_FALLBACK_SIZE default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE ) else - if CONFIG_CBFS - default CONFIG_ROM_SECTION_SIZE = CONFIG_FALLBACK_SIZE - default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE ) - else - default CONFIG_ROM_SECTION_SIZE = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE ) - default CONFIG_ROM_SECTION_OFFSET = 0 - end + default CONFIG_ROM_SECTION_SIZE = CONFIG_FALLBACK_SIZE + default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE ) end ## diff --git a/src/cpu/amd/car/copy_and_run.c b/src/cpu/amd/car/copy_and_run.c index 79cae6bc83..a391ec59b4 100644 --- a/src/cpu/amd/car/copy_and_run.c +++ b/src/cpu/amd/car/copy_and_run.c @@ -3,16 +3,15 @@ 2006/05/02 - stepan: move nrv2b to an extra file. */ -#if CONFIG_CBFS == 1 void cbfs_and_run_core(const char*, unsigned ebp); static void copy_and_run(void) { -# if CONFIG_USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 cbfs_and_run_core("fallback/coreboot_ram", 0); -# else +#else cbfs_and_run_core("normal/coreboot_ram", 0); -# endif +#endif } #if CONFIG_AP_CODE_IN_CAR == 1 @@ -26,38 +25,3 @@ static void copy_and_run_ap_code_in_car(unsigned ret_addr) # endif } #endif - -#else -void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp); - -extern u8 _liseg, _iseg, _eiseg; - -static void copy_and_run(void) -{ - uint8_t *src, *dst; - unsigned long ilen; - - src = &_liseg; - dst = &_iseg; - ilen = &_eiseg - dst; - - copy_and_run_core(src, dst, ilen, 0); -} - -#if CONFIG_AP_CODE_IN_CAR == 1 - -extern u8 _liseg_apc, _iseg_apc, _eiseg_apc; - -static void copy_and_run_ap_code_in_car(unsigned ret_addr) -{ - uint8_t *src, *dst; - unsigned long ilen; - - src = &_liseg_apc; - dst = &_iseg_apc; - ilen = &_eiseg_apc - dst; - - copy_and_run_core(src, dst, ilen, ret_addr); -} -#endif -#endif diff --git a/src/cpu/amd/model_lx/cache_as_ram.inc b/src/cpu/amd/model_lx/cache_as_ram.inc index fcd7bdc04c..ee4902a269 100644 --- a/src/cpu/amd/model_lx/cache_as_ram.inc +++ b/src/cpu/amd/model_lx/cache_as_ram.inc @@ -222,19 +222,8 @@ __main: movl $0x4000000, %esp movl %esp, %ebp pushl %esi -#if CONFIG_CBFS == 1 pushl $str_coreboot_ram_name call cbfs_and_run_core -#else - movl $_liseg, %esi - movl $_iseg, %edi - movl $_eiseg, %ecx - subl %edi, %ecx - pushl %ecx - pushl %edi - pushl %esi - call copy_and_run_core -#endif .Lhlt: intel_chip_post_macro(0xee) /* post fail ee */ @@ -295,10 +284,8 @@ str_pre_main: .string "Jumping to coreboot.\r\n" .previous #endif /* ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG */ -#if CONFIG_CBFS == 1 -# if CONFIG_USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 str_coreboot_ram_name: .string "fallback/coreboot_ram" -# else +#else str_coreboot_ram_name: .string "normal/coreboot_ram" -# endif #endif diff --git a/src/cpu/x86/car/copy_and_run.c b/src/cpu/x86/car/copy_and_run.c index 7ff63c5e0c..7257c4f6bc 100644 --- a/src/cpu/x86/car/copy_and_run.c +++ b/src/cpu/x86/car/copy_and_run.c @@ -2,7 +2,6 @@ (Written by Patrick Georgi <patrick.georgi@coresystems.de> for coresystems GmbH */ -#if CONFIG_CBFS == 1 void cbfs_and_run_core(char*, unsigned ebp); static void copy_and_run(unsigned cpu_reset) @@ -10,32 +9,9 @@ static void copy_and_run(unsigned cpu_reset) if (cpu_reset == 1) cpu_reset = -1; else cpu_reset = 0; -# if CONFIG_USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 cbfs_and_run_core("fallback/coreboot_ram", cpu_reset); -# else - cbfs_and_run_core("normal/coreboot_ram", cpu_reset); -# endif -} - #else -void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp); - -extern u8 _liseg, _iseg, _eiseg; - -static void copy_and_run(unsigned cpu_reset) -{ - uint8_t *src, *dst; - unsigned long ilen; - - - src = &_liseg; - dst = &_iseg; - ilen = &_eiseg - dst; - - if (cpu_reset == 1) cpu_reset = -1; - else cpu_reset = 0; - - copy_and_run_core(src, dst, ilen, cpu_reset); -} + cbfs_and_run_core("normal/coreboot_ram", cpu_reset); #endif - +} diff --git a/src/devices/pci_rom.c b/src/devices/pci_rom.c index f188bc7d1e..f64a9e8c55 100644 --- a/src/devices/pci_rom.c +++ b/src/devices/pci_rom.c @@ -35,22 +35,17 @@ struct rom_header * pci_rom_probe(struct device *dev) struct rom_header *rom_header; struct pci_data *rom_data; - if (CONFIG_CBFS) { - void *v; - /* if it's in FLASH, then it's as if dev->on_mainboard was true */ - v = cbfs_load_optionrom(dev->vendor, dev->device, NULL); - printk_debug("In cbfs, rom address for %s = %p\n", - dev_path(dev), v); - if (v) { - dev->rom_address = (u32)v; - dev->on_mainboard = 1; - } - } + void *v; + /* if it's in FLASH, then it's as if dev->on_mainboard was true */ + v = cbfs_load_optionrom(dev->vendor, dev->device, NULL); + printk_debug("In cbfs, rom address for %s = %p\n", + dev_path(dev), v); + if (v) { + dev->rom_address = (u32)v; + dev->on_mainboard = 1; + } if (dev->on_mainboard) { - /* this is here as a legacy path. We hope it goes away soon. Users should not have to - * compute the ROM address at build time! - */ // in case some device PCI_ROM_ADDRESS can not be set or readonly rom_address = dev->rom_address; printk_debug("On mainboard, rom address for %s = %lx\n", diff --git a/src/lib/Config.lb b/src/lib/Config.lb index 7569d856f0..7f9a5b5e5e 100644 --- a/src/lib/Config.lb +++ b/src/lib/Config.lb @@ -27,11 +27,5 @@ initobject memset.o initobject memcpy.o initobject memcmp.o -if CONFIG_CBFS - object cbfs.o - object lzma.o -end - -if CONFIG_COMPRESSED_PAYLOAD_LZMA - object lzma.o -end +object cbfs.o +object lzma.o diff --git a/src/mainboard/a-trend/atc-6220/Options.lb b/src/mainboard/a-trend/atc-6220/Options.lb index 713d3bc044..ac9d17f48e 100644 --- a/src/mainboard/a-trend/atc-6220/Options.lb +++ b/src/mainboard/a-trend/atc-6220/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/a-trend/atc-6240/Options.lb b/src/mainboard/a-trend/atc-6240/Options.lb index 82d2d44347..89aa4ba021 100644 --- a/src/mainboard/a-trend/atc-6240/Options.lb +++ b/src/mainboard/a-trend/atc-6240/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/abit/be6-ii_v2_0/Options.lb b/src/mainboard/abit/be6-ii_v2_0/Options.lb index 9e9c5ffe7a..53dad2776e 100644 --- a/src/mainboard/abit/be6-ii_v2_0/Options.lb +++ b/src/mainboard/abit/be6-ii_v2_0/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -98,9 +97,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config. default CONFIG_CONSOLE_VGA = 1 # Override this in targets/*/Config.lb. default CONFIG_PCI_ROM_RUN = 1 # Override this in targets/*/Config.lb. -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/advantech/pcm-5820/Options.lb b/src/mainboard/advantech/pcm-5820/Options.lb index ac76175100..98601c1bac 100644 --- a/src/mainboard/advantech/pcm-5820/Options.lb +++ b/src/mainboard/advantech/pcm-5820/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,9 +102,4 @@ default CONFIG_TTYS0_LCS = 0x3 # 8n1 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/amd/db800/Options.lb b/src/mainboard/amd/db800/Options.lb index 1be68938dc..303f6d27f3 100644 --- a/src/mainboard/amd/db800/Options.lb +++ b/src/mainboard/amd/db800/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -180,10 +179,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/amd/dbm690t/Options.lb b/src/mainboard/amd/dbm690t/Options.lb index 707ed6c455..c94590adcb 100644 --- a/src/mainboard/amd/dbm690t/Options.lb +++ b/src/mainboard/amd/dbm690t/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -301,9 +300,4 @@ default CONFIG_GFXUMA=1 default CONFIG_HAVE_MAINBOARD_RESOURCES=1 ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/amd/norwich/Options.lb b/src/mainboard/amd/norwich/Options.lb index 1c6da2c37a..9315d45cd9 100644 --- a/src/mainboard/amd/norwich/Options.lb +++ b/src/mainboard/amd/norwich/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -180,10 +179,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/amd/pistachio/Options.lb b/src/mainboard/amd/pistachio/Options.lb index 88205e0c99..6ac38aa35e 100644 --- a/src/mainboard/amd/pistachio/Options.lb +++ b/src/mainboard/amd/pistachio/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -299,9 +298,4 @@ default CONFIG_GFXUMA=1 default CONFIG_HAVE_MAINBOARD_RESOURCES=1 ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/amd/rumba/Options.lb b/src/mainboard/amd/rumba/Options.lb index e8a6e106e6..d2eb28e362 100644 --- a/src/mainboard/amd/rumba/Options.lb +++ b/src/mainboard/amd/rumba/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -159,10 +158,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/amd/serengeti_cheetah/Options.lb b/src/mainboard/amd/serengeti_cheetah/Options.lb index 6b53360c4e..fcab077f66 100644 --- a/src/mainboard/amd/serengeti_cheetah/Options.lb +++ b/src/mainboard/amd/serengeti_cheetah/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -325,9 +324,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb index f8079a5cd4..977e67e129 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb @@ -18,7 +18,6 @@ # uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -362,9 +361,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb index 1e8b436b15..ce19152745 100644 --- a/src/mainboard/arima/hdama/Options.lb +++ b/src/mainboard/arima/hdama/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -242,9 +241,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb index 94fa6b6277..51916fb405 100644 --- a/src/mainboard/artecgroup/dbe61/Options.lb +++ b/src/mainboard/artecgroup/dbe61/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -180,10 +179,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asi/mb_5blgp/Options.lb b/src/mainboard/asi/mb_5blgp/Options.lb index 20785e8c19..f9a7bccaf3 100644 --- a/src/mainboard/asi/mb_5blgp/Options.lb +++ b/src/mainboard/asi/mb_5blgp/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,9 +102,4 @@ default CONFIG_TTYS0_LCS = 0x3 # 8n1 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asi/mb_5blmp/Options.lb b/src/mainboard/asi/mb_5blmp/Options.lb index a3aa658565..7e5a96e645 100644 --- a/src/mainboard/asi/mb_5blmp/Options.lb +++ b/src/mainboard/asi/mb_5blmp/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_CBFS uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -161,10 +160,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 # default CONFIG_PCI_ROM_RUN=1 default CONFIG_VIDEO_MB = 0 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/a8n_e/Options.lb b/src/mainboard/asus/a8n_e/Options.lb index d83e938603..dc8ca112e1 100644 --- a/src/mainboard/asus/a8n_e/Options.lb +++ b/src/mainboard/asus/a8n_e/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_USE_FAILOVER_IMAGE @@ -167,9 +166,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON" -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/a8v-e_se/Options.lb b/src/mainboard/asus/a8v-e_se/Options.lb index 15648cba2a..6b48beccb4 100644 --- a/src/mainboard/asus/a8v-e_se/Options.lb +++ b/src/mainboard/asus/a8v-e_se/Options.lb @@ -18,7 +18,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -167,9 +166,4 @@ default CONFIG_TTYS0_LCS = 0x3 # 8n1 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON" -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/m2v-mx_se/Options.lb b/src/mainboard/asus/m2v-mx_se/Options.lb index 1a9fa17cec..bf65a41694 100644 --- a/src/mainboard/asus/m2v-mx_se/Options.lb +++ b/src/mainboard/asus/m2v-mx_se/Options.lb @@ -18,7 +18,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -176,9 +175,4 @@ default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON" default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/mew-am/Options.lb b/src/mainboard/asus/mew-am/Options.lb index 6ccdc4c805..0799ee6491 100644 --- a/src/mainboard/asus/mew-am/Options.lb +++ b/src/mainboard/asus/mew-am/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config. default CONFIG_CONSOLE_VGA = 1 # Override this in targets/*/Config.lb. default CONFIG_PCI_ROM_RUN = 1 # Override this in targets/*/Config.lb. -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/mew-vm/Options.lb b/src/mainboard/asus/mew-vm/Options.lb index 0883ce344d..7879a2e09d 100644 --- a/src/mainboard/asus/mew-vm/Options.lb +++ b/src/mainboard/asus/mew-vm/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -158,9 +157,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 default CONFIG_UDELAY_TSC=1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/p2b-d/Options.lb b/src/mainboard/asus/p2b-d/Options.lb index 25891facc6..fa06475de4 100644 --- a/src/mainboard/asus/p2b-d/Options.lb +++ b/src/mainboard/asus/p2b-d/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,5 +102,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/p2b-ds/Options.lb b/src/mainboard/asus/p2b-ds/Options.lb index a48b3a490a..07f4c29767 100644 --- a/src/mainboard/asus/p2b-ds/Options.lb +++ b/src/mainboard/asus/p2b-ds/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -104,9 +103,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/p2b-f/Options.lb b/src/mainboard/asus/p2b-f/Options.lb index 713d3bc044..ac9d17f48e 100644 --- a/src/mainboard/asus/p2b-f/Options.lb +++ b/src/mainboard/asus/p2b-f/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/p2b/Options.lb b/src/mainboard/asus/p2b/Options.lb index aecae916cc..afee671296 100644 --- a/src/mainboard/asus/p2b/Options.lb +++ b/src/mainboard/asus/p2b/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -98,9 +97,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/asus/p3b-f/Options.lb b/src/mainboard/asus/p3b-f/Options.lb index 713d3bc044..ac9d17f48e 100644 --- a/src/mainboard/asus/p3b-f/Options.lb +++ b/src/mainboard/asus/p3b-f/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/axus/tc320/Options.lb b/src/mainboard/axus/tc320/Options.lb index b8e1a0f89c..5390293807 100644 --- a/src/mainboard/axus/tc320/Options.lb +++ b/src/mainboard/axus/tc320/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,9 +102,4 @@ default CONFIG_TTYS0_LCS = 0x3 # 8n1 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/azza/pt-6ibd/Options.lb b/src/mainboard/azza/pt-6ibd/Options.lb index 713d3bc044..ac9d17f48e 100644 --- a/src/mainboard/azza/pt-6ibd/Options.lb +++ b/src/mainboard/azza/pt-6ibd/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/bcom/winnet100/Options.lb b/src/mainboard/bcom/winnet100/Options.lb index 853e4c0840..b5ef1c742c 100644 --- a/src/mainboard/bcom/winnet100/Options.lb +++ b/src/mainboard/bcom/winnet100/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,9 +102,4 @@ default CONFIG_TTYS0_LCS = 0x3 # 8n1 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/bcom/winnetp680/Options.lb b/src/mainboard/bcom/winnetp680/Options.lb index 212c18ffdc..4d058e21f1 100644 --- a/src/mainboard/bcom/winnetp680/Options.lb +++ b/src/mainboard/bcom/winnetp680/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,10 +102,4 @@ default HOSTCC = "gcc" ## default CONFIG_MAX_PCI_BUSES = 3 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/biostar/m6tba/Options.lb b/src/mainboard/biostar/m6tba/Options.lb index 713d3bc044..ac9d17f48e 100644 --- a/src/mainboard/biostar/m6tba/Options.lb +++ b/src/mainboard/biostar/m6tba/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/broadcom/blast/Options.lb b/src/mainboard/broadcom/blast/Options.lb index ca6738d991..4ae8176b3e 100644 --- a/src/mainboard/broadcom/blast/Options.lb +++ b/src/mainboard/broadcom/blast/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -260,9 +259,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb index 713d3bc044..ac9d17f48e 100644 --- a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb +++ b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/dell/s1850/Options.lb b/src/mainboard/dell/s1850/Options.lb index 49009410d8..1e930265b8 100644 --- a/src/mainboard/dell/s1850/Options.lb +++ b/src/mainboard/dell/s1850/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -228,9 +227,4 @@ default CONFIG_CONSOLE_BTEXT=0 ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/digitallogic/adl855pc/Options.lb b/src/mainboard/digitallogic/adl855pc/Options.lb index 0ece7ebef7..7fc51bcafc 100644 --- a/src/mainboard/digitallogic/adl855pc/Options.lb +++ b/src/mainboard/digitallogic/adl855pc/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -113,11 +112,4 @@ default CONFIG_ROM_PAYLOAD = 1 default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" default HOSTCC="gcc" - - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/digitallogic/msm586seg/Options.lb b/src/mainboard/digitallogic/msm586seg/Options.lb index 5f85c3a917..fe1ed83e94 100644 --- a/src/mainboard/digitallogic/msm586seg/Options.lb +++ b/src/mainboard/digitallogic/msm586seg/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -121,11 +120,4 @@ default CONFIG_ROM_PAYLOAD = 1 default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" default HOSTCC="gcc" - - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/digitallogic/msm586seg/mainboard.c b/src/mainboard/digitallogic/msm586seg/mainboard.c index 7bd8ac0910..d9d3b14dff 100644 --- a/src/mainboard/digitallogic/msm586seg/mainboard.c +++ b/src/mainboard/digitallogic/msm586seg/mainboard.c @@ -35,9 +35,6 @@ static void irqdump() - set ADDDECTL (now done in raminit.c in cpu/amd/sc520 */ static void enable_dev(struct device *dev) { -#if !CONFIG_CBFS - extern unsigned char *rom_start, *rom_end; -#endif volatile struct mmcrpic *pic = MMCRPIC; volatile struct mmcr *mmcr = MMCRDEFAULT; @@ -135,15 +132,6 @@ static void enable_dev(struct device *dev) { */ /* follow fuctory here */ mmcr->dmacontrol.extchanmapa = 0x3210; - -#if !CONFIG_CBFS - /* hack for IDIOTIC need to fix rom_start */ - printk_err("Patching rom_start due to sc520 limits\n"); - rom_start = 0x2000000 + 0x40000; - rom_end = rom_start + CONFIG_PAYLOAD_SIZE - 1; -#endif - - } struct chip_operations mainboard_ops = { CHIP_NAME("DIGITAL-LOGIC MSM586SEG Mainboard") diff --git a/src/mainboard/digitallogic/msm800sev/Options.lb b/src/mainboard/digitallogic/msm800sev/Options.lb index 3d9f0c706a..35f60c65af 100644 --- a/src/mainboard/digitallogic/msm800sev/Options.lb +++ b/src/mainboard/digitallogic/msm800sev/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -180,10 +179,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/eaglelion/5bcm/Options.lb b/src/mainboard/eaglelion/5bcm/Options.lb index f867e9d4d7..f42634fa9c 100644 --- a/src/mainboard/eaglelion/5bcm/Options.lb +++ b/src/mainboard/eaglelion/5bcm/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -164,10 +163,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_VIDEO_MB = 0 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/emulation/qemu-x86/Options.lb b/src/mainboard/emulation/qemu-x86/Options.lb index bf416a2391..5200c08c2b 100644 --- a/src/mainboard/emulation/qemu-x86/Options.lb +++ b/src/mainboard/emulation/qemu-x86/Options.lb @@ -48,13 +48,11 @@ uses CONFIG_USE_PRINTK_IN_CAR uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_CBFS default CONFIG_CONSOLE_SERIAL8250=1 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 -default CONFIG_CBFS=1 ## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. default CONFIG_ROM_SIZE = 256*1024 diff --git a/src/mainboard/gigabyte/ga-6bxc/Options.lb b/src/mainboard/gigabyte/ga-6bxc/Options.lb index 713d3bc044..ac9d17f48e 100644 --- a/src/mainboard/gigabyte/ga-6bxc/Options.lb +++ b/src/mainboard/gigabyte/ga-6bxc/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb index ed45cf60cc..6c6554de46 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb +++ b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb @@ -22,7 +22,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -351,9 +350,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/gigabyte/m57sli/Options.lb b/src/mainboard/gigabyte/m57sli/Options.lb index f0088bb3a3..4df7ff45da 100644 --- a/src/mainboard/gigabyte/m57sli/Options.lb +++ b/src/mainboard/gigabyte/m57sli/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -359,10 +358,5 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## Select power on after power fail setting default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" -# -# CBFS -# -# -default CONFIG_CBFS=1 ### End Options.lb end diff --git a/src/mainboard/hp/dl145_g3/Options.lb b/src/mainboard/hp/dl145_g3/Options.lb index 8f5222db86..f754012bc0 100644 --- a/src/mainboard/hp/dl145_g3/Options.lb +++ b/src/mainboard/hp/dl145_g3/Options.lb @@ -84,7 +84,6 @@ uses CONFIG_PCI_ROM_RUN uses CONFIG_HW_MEM_HOLE_SIZEK uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC uses CONFIG_K8_HT_FREQ_1G_SUPPORT -uses CONFIG_CBFS uses CONFIG_HT_CHAIN_UNITID_BASE uses CONFIG_HT_CHAIN_END_UNITID_BASE @@ -327,9 +326,5 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## Select power on after power fail setting default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" -## -## CBFS -default CONFIG_CBFS=1 - ### End Options.lb end diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb index 57cd89707c..30e452f54c 100644 --- a/src/mainboard/ibm/e325/Options.lb +++ b/src/mainboard/ibm/e325/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -221,9 +220,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb index b232a10dd4..7a2bcd98aa 100644 --- a/src/mainboard/ibm/e326/Options.lb +++ b/src/mainboard/ibm/e326/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -227,9 +226,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/iei/juki-511p/Options.lb b/src/mainboard/iei/juki-511p/Options.lb index 564f66acc0..0538d5f47a 100644 --- a/src/mainboard/iei/juki-511p/Options.lb +++ b/src/mainboard/iei/juki-511p/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -145,10 +144,4 @@ default HOSTCC="gcc" default CONFIG_VIDEO_MB = 0 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/iei/nova4899r/Options.lb b/src/mainboard/iei/nova4899r/Options.lb index 00eaba4893..88c67e024f 100644 --- a/src/mainboard/iei/nova4899r/Options.lb +++ b/src/mainboard/iei/nova4899r/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -172,10 +171,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_VIDEO_MB = 0 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Options.lb b/src/mainboard/iei/pcisa-lx-800-r10/Options.lb index 051ffd56ea..c6ca4155df 100644 --- a/src/mainboard/iei/pcisa-lx-800-r10/Options.lb +++ b/src/mainboard/iei/pcisa-lx-800-r10/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -106,10 +105,4 @@ default CONFIG_TTYS0_LCS = 0x3 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/intel/eagleheights/Options.lb b/src/mainboard/intel/eagleheights/Options.lb index a37095c2f5..1032c61d80 100644 --- a/src/mainboard/intel/eagleheights/Options.lb +++ b/src/mainboard/intel/eagleheights/Options.lb @@ -70,7 +70,6 @@ uses CONFIG_HAVE_SMI_HANDLER uses CONFIG_PCIE_CONFIGSPACE_HOLE uses CONFIG_MMCONF_SUPPORT uses CONFIG_MMCONF_BASE_ADDRESS -uses CONFIG_CBFS # uses CONFIG_MAINBOARD uses CONFIG_MAINBOARD_PART_NUMBER @@ -322,10 +321,5 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 ## Select power on after power fail setting default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" -# -# CBFS -# -default CONFIG_CBFS=1 - ### End Options.lb end diff --git a/src/mainboard/intel/jarrell/Options.lb b/src/mainboard/intel/jarrell/Options.lb index aac7a38d0a..fd46975c07 100644 --- a/src/mainboard/intel/jarrell/Options.lb +++ b/src/mainboard/intel/jarrell/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -242,9 +241,4 @@ default CONFIG_CONSOLE_BTEXT=0 ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/intel/mtarvon/Options.lb b/src/mainboard/intel/mtarvon/Options.lb index c5f2782fd9..2d1cca10fa 100644 --- a/src/mainboard/intel/mtarvon/Options.lb +++ b/src/mainboard/intel/mtarvon/Options.lb @@ -18,7 +18,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -225,9 +224,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/intel/truxton/Options.lb b/src/mainboard/intel/truxton/Options.lb index 2dd7db55fa..dd320dcf86 100644 --- a/src/mainboard/intel/truxton/Options.lb +++ b/src/mainboard/intel/truxton/Options.lb @@ -18,7 +18,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -236,10 +235,4 @@ default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb index 325edba261..aba952b1a1 100644 --- a/src/mainboard/intel/xe7501devkit/Options.lb +++ b/src/mainboard/intel/xe7501devkit/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_PIRQ_TABLE @@ -240,9 +239,4 @@ default CONFIG_DEBUG=1 # default CONFIG_CPU_OPT="-g" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/iwill/dk8_htx/Options.lb b/src/mainboard/iwill/dk8_htx/Options.lb index d216b435d8..1973e607b6 100644 --- a/src/mainboard/iwill/dk8_htx/Options.lb +++ b/src/mainboard/iwill/dk8_htx/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -326,9 +325,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/iwill/dk8s2/Options.lb b/src/mainboard/iwill/dk8s2/Options.lb index 248b69449c..f3560fff55 100644 --- a/src/mainboard/iwill/dk8s2/Options.lb +++ b/src/mainboard/iwill/dk8s2/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -228,9 +227,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/iwill/dk8x/Options.lb b/src/mainboard/iwill/dk8x/Options.lb index 23fdc89ef4..2a1275d278 100644 --- a/src/mainboard/iwill/dk8x/Options.lb +++ b/src/mainboard/iwill/dk8x/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -227,9 +226,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/jetway/j7f24/Options.lb b/src/mainboard/jetway/j7f24/Options.lb index 296ca32c25..3a73d23734 100644 --- a/src/mainboard/jetway/j7f24/Options.lb +++ b/src/mainboard/jetway/j7f24/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -104,10 +103,4 @@ default HOSTCC = "gcc" ## default CONFIG_MAX_PCI_BUSES = 3 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/kontron/986lcd-m/Options.lb b/src/mainboard/kontron/986lcd-m/Options.lb index 25f160c906..5d75737c16 100644 --- a/src/mainboard/kontron/986lcd-m/Options.lb +++ b/src/mainboard/kontron/986lcd-m/Options.lb @@ -71,7 +71,6 @@ uses CONFIG_PCIE_CONFIGSPACE_HOLE uses CONFIG_MMCONF_SUPPORT uses CONFIG_MMCONF_BASE_ADDRESS uses CONFIG_GFXUMA -uses CONFIG_CBFS # uses CONFIG_MAINBOARD @@ -327,10 +326,5 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 ## Select power on after power fail setting default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" -# -# CBFS -# -default CONFIG_CBFS=1 - ### End Options.lb end diff --git a/src/mainboard/lippert/frontrunner/Options.lb b/src/mainboard/lippert/frontrunner/Options.lb index e8a6e106e6..d2eb28e362 100644 --- a/src/mainboard/lippert/frontrunner/Options.lb +++ b/src/mainboard/lippert/frontrunner/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -159,10 +158,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/lippert/roadrunner-lx/Options.lb b/src/mainboard/lippert/roadrunner-lx/Options.lb index f5f99a24fa..f0158c52b8 100644 --- a/src/mainboard/lippert/roadrunner-lx/Options.lb +++ b/src/mainboard/lippert/roadrunner-lx/Options.lb @@ -21,7 +21,6 @@ ## Based on Options.lb from AMD's DB800 mainboard. uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -29,11 +28,6 @@ uses CONFIG_HAVE_HARD_RESET uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_USE_OPTION_TABLE uses CONFIG_ROM_PAYLOAD -uses CONFIG_IDE -uses CONFIG_FS_PAYLOAD -uses CONFIG_FS_EXT2 -uses CONFIG_AUTOBOOT_DELAY -uses CONFIG_AUTOBOOT_CMDLINE uses CONFIG_IRQ_SLOT_COUNT uses CONFIG_MAINBOARD uses CONFIG_MAINBOARD_VENDOR @@ -211,9 +205,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/lippert/spacerunner-lx/Options.lb b/src/mainboard/lippert/spacerunner-lx/Options.lb index f1d25a270a..50c979e164 100644 --- a/src/mainboard/lippert/spacerunner-lx/Options.lb +++ b/src/mainboard/lippert/spacerunner-lx/Options.lb @@ -21,7 +21,6 @@ ## Based on Options.lb from AMD's DB800 mainboard. uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -29,11 +28,6 @@ uses CONFIG_HAVE_HARD_RESET uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_USE_OPTION_TABLE uses CONFIG_ROM_PAYLOAD -uses CONFIG_IDE -uses CONFIG_FS_PAYLOAD -uses CONFIG_FS_EXT2 -uses CONFIG_AUTOBOOT_DELAY -uses CONFIG_AUTOBOOT_CMDLINE uses CONFIG_IRQ_SLOT_COUNT uses CONFIG_MAINBOARD uses CONFIG_MAINBOARD_VENDOR @@ -211,9 +205,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/mitac/6513wu/Options.lb b/src/mainboard/mitac/6513wu/Options.lb index 9a6ee4b52c..8f97a2e3fb 100644 --- a/src/mainboard/mitac/6513wu/Options.lb +++ b/src/mainboard/mitac/6513wu/Options.lb @@ -19,7 +19,6 @@ ## uses CC -uses CONFIG_CBFS uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_CONSOLE_VGA @@ -78,7 +77,6 @@ default CONFIG_ROM_IMAGE_SIZE = 128 * 1024 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE default CONFIG_HAVE_FALLBACK_BOOT = 1 default CONFIG_ROM_PAYLOAD = 1 -default CONFIG_CBFS=1 # RAM layout default CONFIG_RAMBASE = 0x00004000 diff --git a/src/mainboard/msi/ms6119/Options.lb b/src/mainboard/msi/ms6119/Options.lb index 82d2d44347..89aa4ba021 100644 --- a/src/mainboard/msi/ms6119/Options.lb +++ b/src/mainboard/msi/ms6119/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/msi/ms6147/Options.lb b/src/mainboard/msi/ms6147/Options.lb index 76f88467e6..1260545e8e 100644 --- a/src/mainboard/msi/ms6147/Options.lb +++ b/src/mainboard/msi/ms6147/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/msi/ms6178/Options.lb b/src/mainboard/msi/ms6178/Options.lb index f07733b73f..3876018d5d 100644 --- a/src/mainboard/msi/ms6178/Options.lb +++ b/src/mainboard/msi/ms6178/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,7 +96,6 @@ default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -default CONFIG_CBFS = 1 default CONFIG_HAVE_HIGH_TABLES = 1 default CONFIG_VIDEO_MB = 1 end diff --git a/src/mainboard/msi/ms7135/Options.lb b/src/mainboard/msi/ms7135/Options.lb index 8731625cc9..9bd1b0a2b4 100644 --- a/src/mainboard/msi/ms7135/Options.lb +++ b/src/mainboard/msi/ms7135/Options.lb @@ -21,7 +21,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_USE_FAILOVER_IMAGE @@ -320,9 +319,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/msi/ms7260/Options.lb b/src/mainboard/msi/ms7260/Options.lb index 0dd1e2bf72..0b762503fa 100644 --- a/src/mainboard/msi/ms7260/Options.lb +++ b/src/mainboard/msi/ms7260/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_USE_FAILOVER_IMAGE @@ -186,9 +185,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON" -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/msi/ms9185/Options.lb b/src/mainboard/msi/ms9185/Options.lb index 03c4d3ef9d..5e2b387ac4 100644 --- a/src/mainboard/msi/ms9185/Options.lb +++ b/src/mainboard/msi/ms9185/Options.lb @@ -23,7 +23,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -327,9 +326,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/msi/ms9282/Options.lb b/src/mainboard/msi/ms9282/Options.lb index d22644f35e..055361ceca 100644 --- a/src/mainboard/msi/ms9282/Options.lb +++ b/src/mainboard/msi/ms9282/Options.lb @@ -23,7 +23,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -307,9 +306,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/nec/powermate2000/Options.lb b/src/mainboard/nec/powermate2000/Options.lb index 77562a1f93..efe7ea4edc 100644 --- a/src/mainboard/nec/powermate2000/Options.lb +++ b/src/mainboard/nec/powermate2000/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -96,9 +95,4 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb index b7bbeff208..6e7ee7617a 100644 --- a/src/mainboard/newisys/khepri/Options.lb +++ b/src/mainboard/newisys/khepri/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -243,9 +242,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/nvidia/l1_2pvv/Options.lb b/src/mainboard/nvidia/l1_2pvv/Options.lb index d9867827d0..950126d0a3 100644 --- a/src/mainboard/nvidia/l1_2pvv/Options.lb +++ b/src/mainboard/nvidia/l1_2pvv/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -349,9 +348,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/olpc/btest/Options.lb b/src/mainboard/olpc/btest/Options.lb index 1e7335d2b1..23468bd5c6 100644 --- a/src/mainboard/olpc/btest/Options.lb +++ b/src/mainboard/olpc/btest/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -160,10 +159,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/olpc/rev_a/Options.lb b/src/mainboard/olpc/rev_a/Options.lb index 1e7335d2b1..23468bd5c6 100644 --- a/src/mainboard/olpc/rev_a/Options.lb +++ b/src/mainboard/olpc/rev_a/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -160,10 +159,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/pcengines/alix1c/Options.lb b/src/mainboard/pcengines/alix1c/Options.lb index 85350a4b32..4f5e997e77 100644 --- a/src/mainboard/pcengines/alix1c/Options.lb +++ b/src/mainboard/pcengines/alix1c/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -198,10 +197,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/rca/rm4100/Options.lb b/src/mainboard/rca/rm4100/Options.lb index e3c84d5f50..f6ac50dd49 100644 --- a/src/mainboard/rca/rm4100/Options.lb +++ b/src/mainboard/rca/rm4100/Options.lb @@ -19,7 +19,6 @@ ## uses CC -uses CONFIG_CBFS uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_CONSOLE_VGA uses CONFIG_COMPRESSED_PAYLOAD_LZMA @@ -96,9 +95,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_MAINBOARD_VENDOR = "RCA" default CONFIG_MAINBOARD_PART_NUMBER = "RM4100" -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb b/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb index 269d7aed98..2e62bef432 100644 --- a/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb +++ b/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -96,5 +95,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 -default CONFIG_CBFS=1 end diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb index fc73ee0237..9acee56b75 100644 --- a/src/mainboard/sunw/ultra40/Options.lb +++ b/src/mainboard/sunw/ultra40/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -276,9 +275,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/supermicro/h8dme/Options.lb b/src/mainboard/supermicro/h8dme/Options.lb index afb735047a..42280cf7df 100644 --- a/src/mainboard/supermicro/h8dme/Options.lb +++ b/src/mainboard/supermicro/h8dme/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -351,9 +350,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/supermicro/h8dmr/Options.lb b/src/mainboard/supermicro/h8dmr/Options.lb index f862dbda96..c93393a871 100644 --- a/src/mainboard/supermicro/h8dmr/Options.lb +++ b/src/mainboard/supermicro/h8dmr/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -348,11 +347,5 @@ default CONFIG_USE_FAILOVER_IMAGE=0 default CONFIG_USE_FALLBACK_IMAGE=0 default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE -# -# CBFS -# -# -default CONFIG_CBFS=1 - ### End Options.lb end diff --git a/src/mainboard/supermicro/h8dmr_fam10/Options.lb b/src/mainboard/supermicro/h8dmr_fam10/Options.lb index 7fc17b7e52..5556cd3da4 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Options.lb +++ b/src/mainboard/supermicro/h8dmr_fam10/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -360,12 +359,5 @@ default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" default CONFIG_USE_FAILOVER_IMAGE=0 default CONFIG_USE_FALLBACK_IMAGE=0 default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE - -# -# CBFS -# -# -default CONFIG_CBFS=1 - ### End Options.lb end diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb index 2ad1692ea5..35843e6e62 100644 --- a/src/mainboard/supermicro/x6dai_g/Options.lb +++ b/src/mainboard/supermicro/x6dai_g/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -228,10 +227,4 @@ default CONFIG_CONSOLE_BTEXT=0 ### End Options.lb - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb index c9ca49507d..8734f0e9df 100644 --- a/src/mainboard/supermicro/x6dhe_g/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -228,10 +227,4 @@ default CONFIG_CONSOLE_BTEXT=0 ### End Options.lb - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb index c9ca49507d..8734f0e9df 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -228,10 +227,4 @@ default CONFIG_CONSOLE_BTEXT=0 ### End Options.lb - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb index 717f9df150..240b8c5bea 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -228,9 +227,4 @@ default CONFIG_CONSOLE_BTEXT=0 ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb index 717f9df150..240b8c5bea 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -228,9 +227,4 @@ default CONFIG_CONSOLE_BTEXT=0 ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/technexion/tim8690/Options.lb b/src/mainboard/technexion/tim8690/Options.lb index fef8a9f1b7..c496ad121c 100644 --- a/src/mainboard/technexion/tim8690/Options.lb +++ b/src/mainboard/technexion/tim8690/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME diff --git a/src/mainboard/technologic/ts5300/Options.lb b/src/mainboard/technologic/ts5300/Options.lb index c3f0c6e445..d55ea949f5 100644 --- a/src/mainboard/technologic/ts5300/Options.lb +++ b/src/mainboard/technologic/ts5300/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -135,10 +134,4 @@ default CONFIG_ROM_PAYLOAD = 1 ## default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" default HOSTCC="gcc" - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c index 551c3e0a84..29a08f5784 100644 --- a/src/mainboard/technologic/ts5300/mainboard.c +++ b/src/mainboard/technologic/ts5300/mainboard.c @@ -35,9 +35,6 @@ static void irqdump() - set ADDDECTL (now done in raminit.c in cpu/amd/sc520 */ static void enable_dev(struct device *dev) { -#if !CONFIG_CBFS - extern unsigned char *rom_start, *rom_end; -#endif volatile struct mmcrpic *pic = MMCRPIC; volatile struct mmcr *mmcr = MMCRDEFAULT; @@ -141,15 +138,7 @@ static void enable_dev(struct device *dev) { mmcr->dmacontrol.extchanmapa = 0xf210; mmcr->dmacontrol.extchanmapb = 0xffff; -#if !CONFIG_CBFS - /* hack for IDIOTIC need to fix rom_start */ - printk_err("Patching rom_start due to sc520 limits\n"); - rom_start = 0x09400000 + 0xe0000; - rom_end = rom_start + CONFIG_PAYLOAD_SIZE - 1; -#endif - printk_err("TS5300 EXIT %s\n", __func__); - } struct chip_operations mainboard_ops = { diff --git a/src/mainboard/televideo/tc7020/Options.lb b/src/mainboard/televideo/tc7020/Options.lb index 3c38d53e60..988f247d96 100644 --- a/src/mainboard/televideo/tc7020/Options.lb +++ b/src/mainboard/televideo/tc7020/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,10 +102,4 @@ default CONFIG_TTYS0_BASE = 0x3f8 default CONFIG_TTYS0_LCS = 0x3 # 8n1 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/thomson/ip1000/Options.lb b/src/mainboard/thomson/ip1000/Options.lb index 96ab879fdf..349c7b5e82 100644 --- a/src/mainboard/thomson/ip1000/Options.lb +++ b/src/mainboard/thomson/ip1000/Options.lb @@ -19,7 +19,6 @@ ## uses CC -uses CONFIG_CBFS uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_CONSOLE_VGA uses CONFIG_COMPRESSED_PAYLOAD_LZMA @@ -96,9 +95,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_MAINBOARD_VENDOR = "THOMSON" default CONFIG_MAINBOARD_PART_NUMBER = "IP1000" -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s1846/Options.lb b/src/mainboard/tyan/s1846/Options.lb index 3e1990e6a6..31ae0040fc 100644 --- a/src/mainboard/tyan/s1846/Options.lb +++ b/src/mainboard/tyan/s1846/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -97,10 +96,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb index 609f266b81..144a37223c 100644 --- a/src/mainboard/tyan/s2735/Options.lb +++ b/src/mainboard/tyan/s2735/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -256,9 +255,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index bd4433f7d3..9372378e21 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -244,9 +243,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index 8d0357aadb..3d56bff67e 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -245,9 +244,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index 9006a447c2..02596bf677 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -244,9 +243,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index 417e0075bc..52b5d16939 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -261,9 +260,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 21bbf00b15..70193e1eba 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -244,9 +243,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index 0b4d9a0980..2e14f74fd0 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -271,9 +270,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 4b6c226727..4be3ce14f8 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -300,9 +299,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index c80e772e9d..26f512eae1 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -288,9 +287,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index 7e4da22fa6..4c23fee1db 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -307,9 +306,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb index 640f147296..cf9c88af5e 100644 --- a/src/mainboard/tyan/s2912/Options.lb +++ b/src/mainboard/tyan/s2912/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -351,9 +350,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s2912_fam10/Options.lb b/src/mainboard/tyan/s2912_fam10/Options.lb index 62b6af985a..2efb02af01 100644 --- a/src/mainboard/tyan/s2912_fam10/Options.lb +++ b/src/mainboard/tyan/s2912_fam10/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME @@ -360,9 +359,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index c9fa096385..22d462e9d9 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -253,9 +252,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index d76d2ec208..c41b2e7ecf 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -252,9 +251,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/via/epia-cn/Options.lb b/src/mainboard/via/epia-cn/Options.lb index 1f2b70a908..9e6fa4f3cc 100644 --- a/src/mainboard/via/epia-cn/Options.lb +++ b/src/mainboard/via/epia-cn/Options.lb @@ -20,7 +20,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -103,11 +102,4 @@ default HOSTCC = "gcc" ## time when it can't find a device. ## default CONFIG_MAX_PCI_BUSES = 3 - - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb index c019b22b0e..1f6af3f5e7 100644 --- a/src/mainboard/via/epia-m/Options.lb +++ b/src/mainboard/via/epia-m/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -142,11 +141,4 @@ default CONFIG_MAX_PCI_BUSES = 5 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 default CONFIG_CONSOLE_SERIAL8250=1 - - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/via/epia-m700/Options.lb b/src/mainboard/via/epia-m700/Options.lb index 7f0477f0fc..aeebe2a401 100644 --- a/src/mainboard/via/epia-m700/Options.lb +++ b/src/mainboard/via/epia-m700/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_HAVE_MP_TABLE -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT @@ -137,7 +136,6 @@ default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32" default HOSTCC = "gcc" default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 -default CONFIG_CBFS=1 ## ## Set this to the max PCI bus number you would ever use for PCI config I/O. diff --git a/src/mainboard/via/epia-n/Options.lb b/src/mainboard/via/epia-n/Options.lb index 21b751811e..de6e6f9f60 100644 --- a/src/mainboard/via/epia-n/Options.lb +++ b/src/mainboard/via/epia-n/Options.lb @@ -19,7 +19,6 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_CBFS uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_HAVE_FAILOVER_BOOT uses CONFIG_USE_FAILOVER_IMAGE @@ -120,11 +119,4 @@ default CONFIG_HAVE_MAINBOARD_RESOURCES = 1 ## time when it can't find a device. ## default CONFIG_MAX_PCI_BUSES = 3 - - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/via/epia/Options.lb b/src/mainboard/via/epia/Options.lb index 0d20674aff..a0b60055a0 100644 --- a/src/mainboard/via/epia/Options.lb +++ b/src/mainboard/via/epia/Options.lb @@ -1,5 +1,4 @@ uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_CBFS uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_TTYS0_BAUD @@ -139,12 +138,4 @@ default CONFIG_ROM_PAYLOAD = 1 default CONFIG_CROSS_COMPILE="" default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" default HOSTCC="gcc" - - - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/via/pc2500e/Options.lb b/src/mainboard/via/pc2500e/Options.lb index ce03e723be..d870030dfe 100644 --- a/src/mainboard/via/pc2500e/Options.lb +++ b/src/mainboard/via/pc2500e/Options.lb @@ -19,7 +19,6 @@ ## uses CONFIG_SMP -uses CONFIG_CBFS uses CONFIG_HAVE_MP_TABLE uses CONFIG_HAVE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE @@ -111,11 +110,4 @@ default CONFIG_TTYS0_BASE = 0x3f8 default CONFIG_TTYS0_LCS = 0x3 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 - - -# -# CBFS -# -# -default CONFIG_CBFS=1 end diff --git a/src/mainboard/via/vt8454c/Options.lb b/src/mainboard/via/vt8454c/Options.lb index 8f6dbed15e..d72f419a1c 100644 --- a/src/mainboard/via/vt8454c/Options.lb +++ b/src/mainboard/via/vt8454c/Options.lb @@ -55,7 +55,6 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_CBFS # compiler specifics uses CONFIG_CROSS_COMPILE @@ -242,11 +241,5 @@ default CONFIG_TTYS0_LCS=0x3 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5 ## At a maximum only compile in this level of debugging default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5 - -# -# CBFS -# -default CONFIG_CBFS=1 - end diff --git a/src/stream/Config.lb b/src/stream/Config.lb deleted file mode 100644 index 89f8404f5a..0000000000 --- a/src/stream/Config.lb +++ /dev/null @@ -1,27 +0,0 @@ -uses CONFIG_ROM_PAYLOAD -uses CONFIG_IDE_PAYLOAD -uses CONFIG_FS_PAYLOAD -uses CONFIG_IDE -uses CONFIG_SERIAL_PAYLOAD -uses CONFIG_CBFS - -if CONFIG_CBFS -else -if CONFIG_ROM_PAYLOAD - object rom_stream.o -end - -if CONFIG_IDE_PAYLOAD - default CONFIG_IDE=1 - object ide_stream.o -end - -if CONFIG_FS_PAYLOAD - object fs_stream.o - dir fs -end - -if CONFIG_SERIAL_PAYLOAD - object serial_stream.o -end -end diff --git a/src/stream/fs/Config.lb b/src/stream/fs/Config.lb deleted file mode 100644 index 86d81f0dcc..0000000000 --- a/src/stream/fs/Config.lb +++ /dev/null @@ -1,18 +0,0 @@ -uses CONFIG_FS_EXT2 -uses CONFIG_FS_ISO9660 -uses CONFIG_FS_FAT - -object blockdev.o -object vfs.o - -if CONFIG_FS_EXT2 - object ext2fs.o -end - -if CONFIG_FS_ISO9660 - object iso9660.o -end - -if CONFIG_FS_FAT - object fat.o -end diff --git a/src/stream/fs/blockdev.c b/src/stream/fs/blockdev.c deleted file mode 100644 index aa818dd496..0000000000 --- a/src/stream/fs/blockdev.c +++ /dev/null @@ -1,411 +0,0 @@ -#include <console/console.h> -#include <fs/fs.h> -#include <arch/io.h> -#include <string.h> -#include <delay.h> -#include <pc80/ide.h> -#include <arch/byteorder.h> - -#define NUM_CACHE 64 -static unsigned char buf_cache[NUM_CACHE][512]; -static unsigned long cache_sect[NUM_CACHE]; - -static char dev_name[256]; - -int dev_type = -1; -int dev_drive = -1; -unsigned long part_start; -unsigned long part_length; -int using_devsize; - -unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base) -{ - unsigned long long result = 0,value; - - if (!base) { - base = 10; - if (*cp == '0') { - base = 8; - cp++; - if ((*cp == 'x') && isxdigit(cp[1])) { - cp++; - base = 16; - } - } - } - while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp) - ? toupper(*cp) : *cp)-'A'+10) < base) { - result = result*base + value; - cp++; - } - if (endp) - *endp = (char *)cp; - return result; -} - -unsigned long long strtoull_with_suffix(const char *cp,char **endp,unsigned int base) -{ - unsigned long long result; - - if (!endp) { - return 0; - } - result = simple_strtoull(cp, endp, base); - switch (toupper(**endp)) { - case 'K': - result <<= 10; - ++*endp; - break; - case 'M': - result <<= 20; - ++*endp; - break; - case 'G': - result <<= 30; - ++*endp; - break; - } - return result; -} - -unsigned int get_le32(const unsigned char *p) -{ - return ((unsigned int) p[0] << 0) - | ((unsigned int) p[1] << 8) - | ((unsigned int) p[2] << 16) - | ((unsigned int) p[3] << 24); -} - -static inline int has_pc_part_magic(unsigned char *sect) -{ - return sect[510]==0x55 && sect[511]==0xAA; -} - -static inline int is_pc_extended_part(unsigned char type) -{ - return type==5 || type==0xf || type==0x85; -} - -/* IBM-PC/MS-DOS style partitioning scheme */ -static int open_pc_partition(int part, unsigned long *start_p, - unsigned long *length_p) -{ - /* Layout of PC partition table */ - struct pc_partition { - unsigned char boot; - unsigned char head; - unsigned char sector; - unsigned char cyl; - unsigned char type; - unsigned char e_head; - unsigned char e_sector; - unsigned char e_cyl; - unsigned char start_sect[4]; /* unaligned little endian */ - unsigned char nr_sects[4]; /* ditto */ - } *p; - unsigned char buf[512]; - - /* PC partition probe */ - if (!devread(0, 0, sizeof buf, buf)) { - printk_debug("device read failed\n"); - return 0; - } - if (!has_pc_part_magic(buf)) { - printk_debug("pc partition magic number not found\n"); - //printk_debug_hexdump(buf, 512); - return PARTITION_UNKNOWN; - } - p = (struct pc_partition *) (buf + 0x1be); - if (part < 4) { - /* Primary partition */ - p += part; - if (p->type==0 || is_pc_extended_part(p->type)) { - printk_info("Partition %d does not exist\n", part+1); - return 0; - } - *start_p = get_le32(p->start_sect); - *length_p = get_le32(p->nr_sects); - return 1; - } else { - /* Extended partition */ - int i; - int cur_part; - unsigned long ext_start, cur_table; - /* Search for the extended partition - * which contains logical partitions */ - for (i = 0; i < 4; i++) { - if (is_pc_extended_part(p[i].type)) - break; - } - if (i >= 4) { - printk_info("Extended partition not found\n"); - return 0; - } - printk_debug("Extended partition at %d\n", i+1); - /* Visit each logical partition labels */ - ext_start = get_le32(p[i].start_sect); - cur_table = ext_start; - cur_part = 4; - for (;;) { - printk_debug("cur_part=%d at %lu\n", cur_part, cur_table); - if (!devread(cur_table, 0, sizeof buf, buf)) - return 0; - if (!has_pc_part_magic(buf)) { - printk_debug("no magic\n"); - break; - } - - p = (struct pc_partition *) (buf + 0x1be); - /* First entry is the logical partition */ - if (cur_part == part) { - if (p->type==0) { - printk_info("Partition %d is empty\n", part+1); - return 0; - } - *start_p = cur_table + get_le32(p->start_sect); - *length_p = get_le32(p->nr_sects); - return 1; - } - /* Second entry is link to next partition */ - if (!is_pc_extended_part(p[1].type)) { - printk_debug("no link\n"); - break; - } - cur_table = ext_start + get_le32(p[1].start_sect); - - cur_part++; - } - printk_info("Logical partition %d not exist\n", part+1); - return 0; - } -} - -static void flush_cache(void) -{ - int i; - for (i = 0; i < NUM_CACHE; i++) - cache_sect[i] = (unsigned long) -1; -} - -static int parse_device_name(const char *name, int *type, int *drive, - int *part, uint64_t *offset, uint64_t *length) -{ - *offset = *length = 0; - - if (memcmp(name, "hd", 2) == 0) { - *type = DISK_IDE; - name += 2; - if (*name < 'a' || *name > 'z') { - printk_info("Invalid drive\n"); - return 0; - } - *drive = *name - 'a'; - name++; - } else if (memcmp(name, "mem", 3) == 0) { - *type = DISK_MEM; - name += 3; - *drive = 0; - } else { - printk_info("Unknown device type\n"); - return 0; - } - - *part = (int) simple_strtoull(name, (char **)&name, 0); - - if (*name == '@') { - name++; - *offset = strtoull_with_suffix(name, (char **)&name, 0); - if (*name == ',') - *length = strtoull_with_suffix(name+1, (char **)&name, 0); - printk_debug("offset=%#Lx length=%#Lx\n", *offset, *length); - } - - if (*name != '\0') { - printk_info("Can't parse device name\n"); - return 0; - } - - return 1; -} - -int devopen(const char *name, int *reopen) -{ - int type, drive, part, i; - uint64_t offset, length; - uint32_t disk_size = 0; - - /* Don't re-open the device that's already open */ - if (strcmp(name, dev_name) == 0) { - printk_debug("already open\n"); - *reopen = 1; - return 1; - } - *reopen = 0; - - if (!parse_device_name(name, &type, &drive, &part, &offset, &length)) { - printk_debug("failed to parse device name: %s\n", name); - return 0; - } - - /* Do simple sanity check first */ - if (offset & 0x1ff) { - printk_info("Device offset must be multiple of 512\n"); - return 0; - } - if (length & 0x1ff) { - printk_info("WARNING: length is rounded up to multiple of 512\n"); - length = (length + 0x1ff) & ~0x1ff; - } - - switch (type) { - case DISK_IDE: - printk_debug ("Trying polled ide\n"); - printk_debug ("Waiting for ide disks to spin up\n"); - printk_notice ("This is a hard coded delay and longer than necessary.\n"); - for (i = 0; i < 2; i++) { - printk_notice ("."); - delay(1); - } - printk_info ("\n"); - - if (ide_probe(drive) != 0) { - printk_debug("failed to open ide\n"); - return 0; - } - disk_size = (uint32_t) -1; /* FIXME */ - break; - case DISK_MEM: - disk_size = 1 << (32 - 9); /* 4GB/512-byte */ - break; - default: - printk_info("Unknown device type %d\n", type); - return 0; - } - - if (dev_type != type || dev_drive != drive) - flush_cache(); - - /* start with whole disk */ - dev_type = type; - dev_drive = drive; - part_start = 0; - part_length = disk_size; - using_devsize = 1; - - if (part != 0) { - /* partition is specified */ - int ret; - ret = open_pc_partition(part - 1, &part_start, &part_length); - if (ret == PARTITION_UNKNOWN) { - ret = open_eltorito_image(part - 1, &part_start, &part_length); - if (ret == PARTITION_UNKNOWN) { - printk_info("Unrecognized partitioning scheme\n"); - return 0; - } - } - if (ret == 0) { - printk_debug("can't open partition %d\n", part); - return 0; - } - - printk_debug("Partition %d start %lu length %lu\n", part, - part_start, part_length); - } - - if (offset) { - if (offset >= (uint64_t) part_length << 9) { - printk_info("Device offset is too high\n"); - return 0; - } - part_start += offset >> 9; - part_length -= offset >> 9; - printk_debug("after offset: start %lu, length %lu\n", part_start, part_length); - } - - if (length) { - if (length > (uint64_t) part_length << 9) { - printk_info("Specified length exceeds the size of device\n"); - return 0; - } - part_length = length >> 9; - printk_debug("after length: length %lu\n", part_length); - using_devsize = 0; - } - - strncpy(dev_name, name, sizeof dev_name-1); - - return 1; -} - -/* Read a sector from opened device with simple/stupid buffer cache */ -static void *read_sector(unsigned long sector) -{ - unsigned int hash; - void *buf; - - /* If reading memory, just return the memory as the buffer */ - if (dev_type == DISK_MEM) { - unsigned long phys = sector << 9; - //printk_debug("mem: %#lx\n", phys); - return (void *)phys; - } - - /* Search in the cache */ - hash = sector % NUM_CACHE; - buf = buf_cache[hash]; - if (cache_sect[hash] != sector) { - cache_sect[hash] = (unsigned long) -1; - switch (dev_type) { - case DISK_IDE: - if (ide_read(dev_drive, sector, buf) != 0) - goto readerr; - break; - default: - printk_info("read_sector: device not open\n"); - return 0; - } - cache_sect[hash] = sector; - } - return buf; - -readerr: - printk_info("Disk read error dev=%d drive=%d sector=%lu\n", - dev_type, dev_drive, sector); - dev_name[0] = '\0'; /* force re-open the device next time */ - return 0; -} - -int devread(unsigned long sector, unsigned long byte_offset, - unsigned long byte_len, void *buf) -{ - char *sector_buffer; - char *dest = buf; - unsigned long len; - - sector += byte_offset >> 9; - byte_offset &= 0x1ff; - - if (sector + ((byte_len + 0x1ff) >> 9) > part_length) { - printk_info("Attempt to read out of device/partition\n"); - printk_debug("sector=%lu part_length=%lu byte_len=%lu\n", - sector, part_length, byte_len); - return 0; - } - - while (byte_len > 0) { - sector_buffer = read_sector(part_start + sector); - if (!sector_buffer) { - printk_debug("read sector failed\n"); - return 0; - } - len = 512 - byte_offset; - if (len > byte_len) - len = byte_len; - memcpy(dest, sector_buffer + byte_offset, len); - sector++; - byte_offset = 0; - byte_len -= len; - dest += len; - } - return 1; -} diff --git a/src/stream/fs/ext2fs.c b/src/stream/fs/ext2fs.c deleted file mode 100644 index 9cf0bc6500..0000000000 --- a/src/stream/fs/ext2fs.c +++ /dev/null @@ -1,793 +0,0 @@ -/* - * GRUB -- GRand Unified Bootloader - * Copyright (C) 1999, 2001 Free Software Foundation, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <console/console.h> -#include <fs/fs.h> -#include <string.h> -#include <arch/byteorder.h> - -static int mapblock1, mapblock2; - -/* sizes are always in bytes, BLOCK values are always in DEV_BSIZE (sectors) */ -#define DEV_BSIZE 512 - -/* include/linux/fs.h */ -#define BLOCK_SIZE 1024 /* initial block size for superblock read */ -/* made up, defaults to 1 but can be passed via mount_opts */ -#define WHICH_SUPER 1 -/* kind of from fs/ext2/super.c */ -#define SBLOCK (WHICH_SUPER * BLOCK_SIZE / DEV_BSIZE) /* = 2 */ - -/* include/asm-i386/types.h */ -typedef __signed__ char __s8; -typedef unsigned char __u8; -typedef __signed__ short __s16; -typedef unsigned short __u16; -typedef __signed__ int __s32; -typedef unsigned int __u32; - -/* - * Constants relative to the data blocks, from ext2_fs.h - */ -#define EXT2_NDIR_BLOCKS 12 -#define EXT2_IND_BLOCK EXT2_NDIR_BLOCKS -#define EXT2_DIND_BLOCK (EXT2_IND_BLOCK + 1) -#define EXT2_TIND_BLOCK (EXT2_DIND_BLOCK + 1) -#define EXT2_N_BLOCKS (EXT2_TIND_BLOCK + 1) - -/* include/linux/ext2_fs.h */ -struct ext2_super_block - { - __u32 s_inodes_count; /* Inodes count */ - __u32 s_blocks_count; /* Blocks count */ - __u32 s_r_blocks_count; /* Reserved blocks count */ - __u32 s_free_blocks_count; /* Free blocks count */ - __u32 s_free_inodes_count; /* Free inodes count */ - __u32 s_first_data_block; /* First Data Block */ - __u32 s_log_block_size; /* Block size */ - __s32 s_log_frag_size; /* Fragment size */ - __u32 s_blocks_per_group; /* # Blocks per group */ - __u32 s_frags_per_group; /* # Fragments per group */ - __u32 s_inodes_per_group; /* # Inodes per group */ - __u32 s_mtime; /* Mount time */ - __u32 s_wtime; /* Write time */ - __u16 s_mnt_count; /* Mount count */ - __s16 s_max_mnt_count; /* Maximal mount count */ - __u16 s_magic; /* Magic signature */ - __u16 s_state; /* File system state */ - __u16 s_errors; /* Behaviour when detecting errors */ - __u16 s_pad; - __u32 s_lastcheck; /* time of last check */ - __u32 s_checkinterval; /* max. time between checks */ - __u32 s_creator_os; /* OS */ - __u32 s_rev_level; /* Revision level */ - __u16 s_def_resuid; /* Default uid for reserved blocks */ - __u16 s_def_resgid; /* Default gid for reserved blocks */ - __u32 s_reserved[235]; /* Padding to the end of the block */ - }; - -struct ext2_group_desc - { - __u32 bg_block_bitmap; /* Blocks bitmap block */ - __u32 bg_inode_bitmap; /* Inodes bitmap block */ - __u32 bg_inode_table; /* Inodes table block */ - __u16 bg_free_blocks_count; /* Free blocks count */ - __u16 bg_free_inodes_count; /* Free inodes count */ - __u16 bg_used_dirs_count; /* Directories count */ - __u16 bg_pad; - __u32 bg_reserved[3]; - }; - -struct ext2_inode - { - __u16 i_mode; /* File mode */ - __u16 i_uid; /* Owner Uid */ - __u32 i_size; /* 4: Size in bytes */ - __u32 i_atime; /* Access time */ - __u32 i_ctime; /* 12: Creation time */ - __u32 i_mtime; /* Modification time */ - __u32 i_dtime; /* 20: Deletion Time */ - __u16 i_gid; /* Group Id */ - __u16 i_links_count; /* 24: Links count */ - __u32 i_blocks; /* Blocks count */ - __u32 i_flags; /* 32: File flags */ - union - { - struct - { - __u32 l_i_reserved1; - } - linux1; - struct - { - __u32 h_i_translator; - } - hurd1; - struct - { - __u32 m_i_reserved1; - } - masix1; - } - osd1; /* OS dependent 1 */ - __u32 i_block[EXT2_N_BLOCKS]; /* 40: Pointers to blocks */ - __u32 i_version; /* File version (for NFS) */ - __u32 i_file_acl; /* File ACL */ - __u32 i_dir_acl; /* Directory ACL */ - __u32 i_faddr; /* Fragment address */ - union - { - struct - { - __u8 l_i_frag; /* Fragment number */ - __u8 l_i_fsize; /* Fragment size */ - __u16 i_pad1; - __u32 l_i_reserved2[2]; - } - linux2; - struct - { - __u8 h_i_frag; /* Fragment number */ - __u8 h_i_fsize; /* Fragment size */ - __u16 h_i_mode_high; - __u16 h_i_uid_high; - __u16 h_i_gid_high; - __u32 h_i_author; - } - hurd2; - struct - { - __u8 m_i_frag; /* Fragment number */ - __u8 m_i_fsize; /* Fragment size */ - __u16 m_pad1; - __u32 m_i_reserved2[2]; - } - masix2; - } - osd2; /* OS dependent 2 */ - }; - -/* linux/limits.h */ -#define NAME_MAX 255 /* # chars in a file name */ - -/* linux/posix_type.h */ -typedef long linux_off_t; - -/* linux/ext2fs.h */ -#define EXT2_NAME_LEN 255 -struct ext2_dir_entry - { - __u32 inode; /* Inode number */ - __u16 rec_len; /* Directory entry length */ - __u8 name_len; /* Name length */ - __u8 file_type; - char name[EXT2_NAME_LEN]; /* File name */ - }; - -/* linux/ext2fs.h */ -/* - * EXT2_DIR_PAD defines the directory entries boundaries - * - * NOTE: It must be a multiple of 4 - */ -#define EXT2_DIR_PAD 4 -#define EXT2_DIR_ROUND (EXT2_DIR_PAD - 1) -#define EXT2_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT2_DIR_ROUND) & \ - ~EXT2_DIR_ROUND) - - -/* ext2/super.c */ -#define log2(n) ffz(~(n)) - -#define EXT2_SUPER_MAGIC 0xEF53 /* include/linux/ext2_fs.h */ -#define EXT2_ROOT_INO 2 /* include/linux/ext2_fs.h */ -#define PATH_MAX 1024 /* include/linux/limits.h */ -#define MAX_LINK_COUNT 5 /* number of symbolic links to follow */ - -/* made up, these are pointers into FSYS_BUF */ -/* read once, always stays there: */ -#define SUPERBLOCK \ - ((struct ext2_super_block *)(FSYS_BUF)) -#define GROUP_DESC \ - ((struct ext2_group_desc *) \ - ((int)SUPERBLOCK + sizeof(struct ext2_super_block))) -#define INODE \ - ((struct ext2_inode *)((int)GROUP_DESC + EXT2_BLOCK_SIZE(SUPERBLOCK))) -#define DATABLOCK1 \ - ((int)((int)INODE + sizeof(struct ext2_inode))) -#define DATABLOCK2 \ - ((int)((int)DATABLOCK1 + EXT2_BLOCK_SIZE(SUPERBLOCK))) - -/* linux/ext2_fs.h */ -#define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (__u32)) -#define EXT2_ADDR_PER_BLOCK_BITS(s) (log2(EXT2_ADDR_PER_BLOCK(s))) - -/* linux/ext2_fs.h */ -#define EXT2_BLOCK_SIZE_BITS(s) (le32_to_cpu((s)->s_log_block_size) + 10) -/* kind of from ext2/super.c */ -#define EXT2_BLOCK_SIZE(s) (1 << EXT2_BLOCK_SIZE_BITS(s)) -/* linux/ext2fs.h */ -#define EXT2_DESC_PER_BLOCK(s) \ - (EXT2_BLOCK_SIZE(s) / sizeof (struct ext2_group_desc)) -/* linux/stat.h */ -#define S_IFMT 00170000 -#define S_IFLNK 0120000 -#define S_IFREG 0100000 -#define S_IFDIR 0040000 -#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK) -#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG) -#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) - -/* include/asm-i386/bitops.h */ -/* - * ffz = Find First Zero in word. Undefined if no zero exists, - * so code should check against ~0UL first.. - */ -#ifdef __i386 -static __inline__ unsigned long -ffz (unsigned long word) -{ - __asm__ ("bsfl %1,%0" -: "=r" (word) -: "r" (~word)); - return word; -} -#else /* !PPC */ -static __inline__ unsigned long - __ilog2(unsigned long x) -{ - unsigned long lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); - return 31 - lz; -} -static __inline__ unsigned long -ffz(unsigned long x) -{ - if ((x = ~x) == 0) - return 32; - return __ilog2(x & -x); -} -#endif - -/* check filesystem types and read superblock into memory buffer */ -int -ext2fs_mount (void) -{ - int retval = 1; - - if ((((current_drive & 0x80) || (current_slice != 0)) - && (current_slice != PC_SLICE_TYPE_EXT2FS) - && (current_slice != PC_SLICE_TYPE_LINUX_RAID) - && (! IS_PC_SLICE_TYPE_BSD_WITH_FS (current_slice, FS_EXT2FS)) - && (! IS_PC_SLICE_TYPE_BSD_WITH_FS (current_slice, FS_OTHER))) - || part_length < (SBLOCK + (sizeof (struct ext2_super_block) / DEV_BSIZE)) - || !devread (SBLOCK, 0, sizeof (struct ext2_super_block), - (char *) SUPERBLOCK) - || le16_to_cpu(SUPERBLOCK->s_magic) != EXT2_SUPER_MAGIC) - retval = 0; - - return retval; -} - -/* Takes a file system block number and reads it into BUFFER. */ -static int -ext2_rdfsb (int fsblock, int buffer) -{ -#ifdef E2DEBUG - printk_debug ("fsblock %d buffer %d\n", fsblock, buffer); -#endif /* E2DEBUG */ - return devread (fsblock * (EXT2_BLOCK_SIZE (SUPERBLOCK) / DEV_BSIZE), 0, - EXT2_BLOCK_SIZE (SUPERBLOCK), (char *) buffer); -} - -/* from - ext2/inode.c:ext2_bmap() -*/ -/* Maps LOGICAL_BLOCK (the file offset divided by the blocksize) into - a physical block (the location in the file system) via an inode. */ -static int -ext2fs_block_map (int logical_block) -{ - -#ifdef E2DEBUG - unsigned char *i; - for (i = (unsigned char *) INODE; - i < ((unsigned char *) INODE + sizeof (struct ext2_inode)); - i++) - { - printk_debug ("%c", "0123456789abcdef"[*i >> 4]); - printk_debug ("%c", "0123456789abcdef"[*i % 16]); - if (!((i + 1 - (unsigned char *) INODE) % 16)) - { - printk_debug ("\n"); - } - else - { - printk_debug (" "); - } - } - printk_debug ("logical block %d\n", logical_block); -#endif /* E2DEBUG */ - - /* if it is directly pointed to by the inode, return that physical addr */ - if (logical_block < EXT2_NDIR_BLOCKS) - { -#ifdef E2DEBUG - printk_debug ("returning %d\n", (unsigned char *) (le32_to_cpu(INODE->i_block[logical_block]))); - printk_debug ("returning %d\n", le32_to_cpu(INODE->i_block[logical_block])); -#endif /* E2DEBUG */ - return le32_to_cpu(INODE->i_block[logical_block]); - } - /* else */ - logical_block -= EXT2_NDIR_BLOCKS; - /* try the indirect block */ - if (logical_block < EXT2_ADDR_PER_BLOCK (SUPERBLOCK)) - { - if (mapblock1 != 1 - && !ext2_rdfsb (le32_to_cpu(INODE->i_block[EXT2_IND_BLOCK]), DATABLOCK1)) - { - errnum = ERR_FSYS_CORRUPT; - return -1; - } - mapblock1 = 1; - return le32_to_cpu(((__u32 *) DATABLOCK1)[logical_block]); - } - /* else */ - logical_block -= EXT2_ADDR_PER_BLOCK (SUPERBLOCK); - /* now try the double indirect block */ - if (logical_block < (1 << (EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK) * 2))) - { - int bnum; - if (mapblock1 != 2 - && !ext2_rdfsb (le32_to_cpu(INODE->i_block[EXT2_DIND_BLOCK]), DATABLOCK1)) - { - errnum = ERR_FSYS_CORRUPT; - return -1; - } - mapblock1 = 2; - if ((bnum = le32_to_cpu(((__u32 *) DATABLOCK1) - [logical_block >> EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK)])) - != mapblock2 - && !ext2_rdfsb (bnum, DATABLOCK2)) - { - errnum = ERR_FSYS_CORRUPT; - return -1; - } - mapblock2 = bnum; - return le32_to_cpu(((__u32 *) DATABLOCK2) - [logical_block & (EXT2_ADDR_PER_BLOCK (SUPERBLOCK) - 1)]); - } - /* else */ - mapblock2 = -1; - logical_block -= (1 << (EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK) * 2)); - if (mapblock1 != 3 - && !ext2_rdfsb (le32_to_cpu(INODE->i_block[EXT2_TIND_BLOCK]), DATABLOCK1)) - { - errnum = ERR_FSYS_CORRUPT; - return -1; - } - mapblock1 = 3; - if (!ext2_rdfsb (le32_to_cpu(((__u32 *) DATABLOCK1) - [logical_block >> (EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK) - * 2)]), - DATABLOCK2)) - { - errnum = ERR_FSYS_CORRUPT; - return -1; - } - if (!ext2_rdfsb (le32_to_cpu(((__u32 *) DATABLOCK2) - [(logical_block >> EXT2_ADDR_PER_BLOCK_BITS (SUPERBLOCK)) - & (EXT2_ADDR_PER_BLOCK (SUPERBLOCK) - 1)]), - DATABLOCK2)) - { - errnum = ERR_FSYS_CORRUPT; - return -1; - } - return le32_to_cpu(((__u32 *) DATABLOCK2) - [logical_block & (EXT2_ADDR_PER_BLOCK (SUPERBLOCK) - 1)]); -} - -/* preconditions: all preconds of ext2fs_block_map */ -int -ext2fs_read (char *buf, int len) -{ - int logical_block; - int offset; - int map; - int ret = 0; - int size = 0; - -#ifdef E2DEBUG - static char hexdigit[] = "0123456789abcdef"; - unsigned char *i; - for (i = (unsigned char *) INODE; - i < ((unsigned char *) INODE + sizeof (struct ext2_inode)); - i++) - { - printk_debug ("%c", hexdigit[*i >> 4]); - printk_debug ("%c", hexdigit[*i % 16]); - if (!((i + 1 - (unsigned char *) INODE) % 16)) - { - printk_debug ("\n"); - } - else - { - printk_debug (" "); - } - } -#endif /* E2DEBUG */ - while (len > 0) - { - /* find the (logical) block component of our location */ - logical_block = filepos >> EXT2_BLOCK_SIZE_BITS (SUPERBLOCK); - offset = filepos & (EXT2_BLOCK_SIZE (SUPERBLOCK) - 1); - map = ext2fs_block_map (logical_block); -#ifdef E2DEBUG - printk_debug ("map=%d\n", map); -#endif /* E2DEBUG */ - if (map < 0) - break; - - size = EXT2_BLOCK_SIZE (SUPERBLOCK); - size -= offset; - if (size > len) - size = len; - - disk_read_func = disk_read_hook; - - devread (map * (EXT2_BLOCK_SIZE (SUPERBLOCK) / DEV_BSIZE), - offset, size, buf); - - disk_read_func = 0; - - buf += size; - len -= size; - filepos += size; - ret += size; - } - - if (errnum) - ret = 0; - - return ret; -} - - -/* Based on: - def_blk_fops points to - blkdev_open, which calls (I think): - sys_open() - do_open() - open_namei() - dir_namei() which accesses current->fs->root - fs->root was set during original mount: - (something)... which calls (I think): - ext2_read_super() - iget() - __iget() - read_inode() - ext2_read_inode() - uses desc_per_block_bits, which is set in ext2_read_super() - also uses group descriptors loaded during ext2_read_super() - lookup() - ext2_lookup() - ext2_find_entry() - ext2_getblk() - -*/ - -/* preconditions: ext2fs_mount already executed, therefore supblk in buffer - * known as SUPERBLOCK - * returns: 0 if error, nonzero iff we were able to find the file successfully - * postconditions: on a nonzero return, buffer known as INODE contains the - * inode of the file we were trying to look up - * side effects: messes up GROUP_DESC buffer area - */ -int -ext2fs_dir (char *dirname) -{ - int current_ino = EXT2_ROOT_INO; /* start at the root */ - int updir_ino = current_ino; /* the parent of the current directory */ - int group_id; /* which group the inode is in */ - int group_desc; /* fs pointer to that group */ - int desc; /* index within that group */ - int ino_blk; /* fs pointer of the inode's information */ - int str_chk = 0; /* used to hold the results of a string compare */ - struct ext2_group_desc *gdp; - struct ext2_inode *raw_inode; /* inode info corresponding to current_ino */ - - char linkbuf[PATH_MAX]; /* buffer for following symbolic links */ - int link_count = 0; - - char *rest; - char ch; /* temp char holder */ - - int off; /* offset within block of directory entry (off mod blocksize) */ - int loc; /* location within a directory */ - int blk; /* which data blk within dir entry (off div blocksize) */ - long map; /* fs pointer of a particular block from dir entry */ - struct ext2_dir_entry *dp; /* pointer to directory entry */ -#ifdef E2DEBUG - unsigned char *i; -#endif /* E2DEBUG */ - - /* loop invariants: - current_ino = inode to lookup - dirname = pointer to filename component we are cur looking up within - the directory known pointed to by current_ino (if any) - */ - - while (1) - { -#ifdef E2DEBUG - printk_debug ("inode %d\n", current_ino); - printk_debug ("dirname=%s\n", dirname); -#endif /* E2DEBUG */ - - /* look up an inode */ - group_id = (current_ino - 1) / le32_to_cpu(SUPERBLOCK->s_inodes_per_group); - group_desc = group_id >> log2 (EXT2_DESC_PER_BLOCK (SUPERBLOCK)); - desc = group_id & (EXT2_DESC_PER_BLOCK (SUPERBLOCK) - 1); -#ifdef E2DEBUG - printk_debug ("ipg=%d, dpb=%d\n", le32_to_cpu(SUPERBLOCK->s_inodes_per_group), - EXT2_DESC_PER_BLOCK (SUPERBLOCK)); - printk_debug ("group_id=%d group_desc=%d desc=%d\n", group_id, group_desc, desc); -#endif /* E2DEBUG */ - if (!ext2_rdfsb ( - (WHICH_SUPER + group_desc + le32_to_cpu(SUPERBLOCK->s_first_data_block)), - (int) GROUP_DESC)) - { - return 0; - } - gdp = GROUP_DESC; - ino_blk = le32_to_cpu(gdp[desc].bg_inode_table) + - (((current_ino - 1) % le32_to_cpu(SUPERBLOCK->s_inodes_per_group)) - >> log2 (EXT2_BLOCK_SIZE (SUPERBLOCK) / sizeof (struct ext2_inode))); -#ifdef E2DEBUG - printk_debug ("inode table fsblock=%d\n", ino_blk); -#endif /* E2DEBUG */ - if (!ext2_rdfsb (ino_blk, (int) INODE)) - { - return 0; - } - - /* reset indirect blocks! */ - mapblock2 = mapblock1 = -1; - - raw_inode = INODE + - ((current_ino - 1) - & (EXT2_BLOCK_SIZE (SUPERBLOCK) / sizeof (struct ext2_inode) - 1)); -#ifdef E2DEBUG - printk_debug ("ipb=%d, sizeof(inode)=%d\n", - (EXT2_BLOCK_SIZE (SUPERBLOCK) / sizeof (struct ext2_inode)), - sizeof (struct ext2_inode)); - printk_debug ("inode=%x, raw_inode=%x\n", INODE, raw_inode); - printk_debug ("offset into inode table block=%d\n", (int) raw_inode - (int) INODE); - for (i = (unsigned char *) INODE; i <= (unsigned char *) raw_inode; - i++) - { - printk_debug ("%c", "0123456789abcdef"[*i >> 4]); - printk_debug ("%c", "0123456789abcdef"[*i % 16]); - if (!((i + 1 - (unsigned char *) INODE) % 16)) - { - printk_debug ("\n"); - } - else - { - printk_debug (" "); - } - } - printk_debug ("first word=%x\n", *((int *) raw_inode)); -#endif /* E2DEBUG */ - - /* copy inode to fixed location */ - memmove ((void *) INODE, (void *) raw_inode, sizeof (struct ext2_inode)); - -#ifdef E2DEBUG - printk_debug ("first word=%x\n", *((int *) INODE)); -#endif /* E2DEBUG */ - - /* If we've got a symbolic link, then chase it. */ - if (S_ISLNK (le16_to_cpu(INODE->i_mode))) - { - int len; - if (++link_count > MAX_LINK_COUNT) - { - errnum = ERR_SYMLINK_LOOP; - return 0; - } - - /* Find out how long our remaining name is. */ - len = 0; - while (dirname[len] && !isspace (dirname[len])) - len++; - - /* Get the symlink size. */ - filemax = le32_to_cpu(INODE->i_size); - if (filemax + len > sizeof (linkbuf) - 2) - { - errnum = ERR_FILELENGTH; - return 0; - } - - if (len) - { - /* Copy the remaining name to the end of the symlink data. - Note that DIRNAME and LINKBUF may overlap! */ - memmove (linkbuf + filemax, dirname, len); - } - linkbuf[filemax + len] = '\0'; - - /* Read the symlink data. */ - if (le32_to_cpu(INODE->i_blocks)) - { - /* Read the necessary blocks, and reset the file pointer. */ - len = file_read (linkbuf, filemax); - filepos = 0; - if (!len) - return 0; - } - else - { - /* Copy the data directly from the inode. */ - len = filemax; - memmove (linkbuf, (char *) INODE->i_block, len); - } - -#ifdef E2DEBUG - printk_debug ("symlink=%s\n", linkbuf); -#endif - - dirname = linkbuf; - if (*dirname == '/') - { - /* It's an absolute link, so look it up in root. */ - current_ino = EXT2_ROOT_INO; - updir_ino = current_ino; - } - else - { - /* Relative, so look it up in our parent directory. */ - current_ino = updir_ino; - } - - /* Try again using the new name. */ - continue; - } - - /* if end of filename, INODE points to the file's inode */ - if (!*dirname || isspace (*dirname)) - { - if (!S_ISREG (le16_to_cpu(INODE->i_mode))) - { - errnum = ERR_BAD_FILETYPE; - return 0; - } - - filemax = le32_to_cpu(INODE->i_size); - return 1; - } - - /* else we have to traverse a directory */ - updir_ino = current_ino; - - /* skip over slashes */ - while (*dirname == '/') - dirname++; - - /* if this isn't a directory of sufficient size to hold our file, abort */ - if (!(le32_to_cpu(INODE->i_size)) || !S_ISDIR (le16_to_cpu(INODE->i_mode))) - { - errnum = ERR_BAD_FILETYPE; - return 0; - } - - /* skip to next slash or end of filename (space) */ - for (rest = dirname; (ch = *rest) && !isspace (ch) && ch != '/'; - rest++); - - /* look through this directory and find the next filename component */ - /* invariant: rest points to slash after the next filename component */ - *rest = 0; - loc = 0; - - do - { - -#ifdef E2DEBUG - printk_debug ("dirname=%s, rest=%s, loc=%d\n", dirname, rest, loc); -#endif /* E2DEBUG */ - - /* if our location/byte offset into the directory exceeds the size, - give up */ - if (loc >= le32_to_cpu(INODE->i_size)) - { - if (print_possibilities < 0) - { -# if 0 - putchar ('\n'); -# endif - } - else - { - errnum = ERR_FILE_NOT_FOUND; - *rest = ch; - } - return (print_possibilities < 0); - } - - /* else, find the (logical) block component of our location */ - blk = loc >> EXT2_BLOCK_SIZE_BITS (SUPERBLOCK); - - /* we know which logical block of the directory entry we are looking - for, now we have to translate that to the physical (fs) block on - the disk */ - map = ext2fs_block_map (blk); -#ifdef E2DEBUG - printk_debug ("fs block=%d\n", map); -#endif /* E2DEBUG */ - mapblock2 = -1; - if ((map < 0) || !ext2_rdfsb (map, DATABLOCK2)) - { - errnum = ERR_FSYS_CORRUPT; - *rest = ch; - return 0; - } - off = loc & (EXT2_BLOCK_SIZE (SUPERBLOCK) - 1); - dp = (struct ext2_dir_entry *) (DATABLOCK2 + off); - /* advance loc prematurely to next on-disk directory entry */ - loc += le16_to_cpu(dp->rec_len); - - /* NOTE: ext2fs filenames are NOT null-terminated */ - -#ifdef E2DEBUG - printk_debug ("directory entry ino=%d\n", le32_to_cpu(dp->inode)); - if (le32_to_cpu(dp->inode)) - printk_debug ("entry=%s\n", dp->name); -#endif /* E2DEBUG */ - - if (le32_to_cpu(dp->inode)) - { - int saved_c = dp->name[dp->name_len]; - - dp->name[dp->name_len] = 0; - str_chk = substring (dirname, dp->name); - -# ifndef STAGE1_5 - if (print_possibilities && ch != '/' - && (!*dirname || str_chk <= 0)) - { - if (print_possibilities > 0) - print_possibilities = -print_possibilities; - print_a_completion (dp->name); - } -# endif - - dp->name[dp->name_len] = saved_c; - } - - } - while (!le32_to_cpu(dp->inode) || (str_chk || (print_possibilities && ch != '/'))); - - current_ino = le32_to_cpu(dp->inode); - *(dirname = rest) = ch; - } - /* never get here */ -} diff --git a/src/stream/fs/fat.c b/src/stream/fs/fat.c deleted file mode 100644 index 01e4e03cc2..0000000000 --- a/src/stream/fs/fat.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - * GRUB -- GRand Unified Bootloader - * Copyright (C) 2000, 2001 Free Software Foundation, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <console/console.h> -#include <string.h> -#include <fs/fs.h> -#include <fs/fat.h> -#include <arch/byteorder.h> - -struct fat_superblock -{ - int fat_offset; - int fat_length; - int fat_size; - int root_offset; - int root_max; - int data_offset; - - int num_sectors; - int num_clust; - int clust_eof_marker; - int sects_per_clust; - int sectsize_bits; - int clustsize_bits; - int root_cluster; - - int cached_fat; - int file_cluster; - int current_cluster_num; - int current_cluster; -}; - -/* pointer(s) into filesystem info buffer for DOS stuff */ -#define FAT_SUPER ( (struct fat_superblock *) \ - ( FSYS_BUF + 32256) )/* 512 bytes long */ -#define FAT_BUF ( FSYS_BUF + 30208 ) /* 4 sector FAT buffer */ -#define NAME_BUF ( FSYS_BUF + 29184 ) /* Filename buffer (833 bytes) */ - -#define FAT_CACHE_SIZE 2048 - -#ifdef __i386 -static __inline__ unsigned long -log2 (unsigned long word) -{ - __asm__ ("bsfl %1,%0" - : "=r" (word) - : "r" (word)); - return word; -} -#else /* !PPC */ -static __inline__ unsigned long -__ilog2(unsigned long x) -{ - unsigned long lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); - return 31 - lz; -} -static __inline__ unsigned long -log2(unsigned long x) -{ - return __ilog2(x & -x); -} -#endif - -int -fat_mount (void) -{ - struct fat_bpb bpb; - __u32 magic, first_fat; - - /* Check partition type for harddisk */ - if (((current_drive & 0x80) || (current_slice != 0)) - && ! IS_PC_SLICE_TYPE_FAT (current_slice) - && (! IS_PC_SLICE_TYPE_BSD_WITH_FS (current_slice, FS_MSDOS))) - return 0; - - /* Read bpb */ - if (! devread (0, 0, sizeof (bpb), (char *) &bpb)) - return 0; - - /* Check if the number of sectors per cluster is zero here, to avoid - zero division. */ - if (bpb.sects_per_clust == 0) - return 0; - - FAT_SUPER->sectsize_bits = log2(FAT_CVT_U16(bpb.bytes_per_sect)); - FAT_SUPER->clustsize_bits - = FAT_SUPER->sectsize_bits + log2(bpb.sects_per_clust); - -printk_debug("BytsPerSec = %d\n", FAT_CVT_U16(bpb.bytes_per_sect)); -printk_debug("SecPerClus = %d\n", bpb.sects_per_clust); - - /* Fill in info about super block */ - FAT_SUPER->num_sectors = FAT_CVT_U16(bpb.short_sectors) - ? FAT_CVT_U16(bpb.short_sectors) : FAT_CVT_U32(bpb.long_sectors); - -printk_debug("TotSec16 = %d\n", FAT_CVT_U16(bpb.short_sectors)); -printk_debug("TotSec32 = %d\n", FAT_CVT_U32(bpb.long_sectors)); - - /* FAT offset and length */ - FAT_SUPER->fat_offset = FAT_CVT_U16(bpb.reserved_sects); - FAT_SUPER->fat_length = FAT_CVT_U16(bpb.fat_length) - ? FAT_CVT_U16(bpb.fat_length) : FAT_CVT_U32(bpb.fat32_length); - -printk_debug("RsvdSecCnt = %d\n", FAT_CVT_U16(bpb.reserved_sects)); -printk_debug("FATSx16 = %d\n", FAT_CVT_U16(bpb.fat_length)); -printk_debug("FATSx32 = %d\n", FAT_CVT_U32(bpb.fat32_length)); - - /* Rootdir offset and length for FAT12/16 */ - FAT_SUPER->root_offset = - FAT_SUPER->fat_offset + bpb.num_fats * FAT_SUPER->fat_length; - FAT_SUPER->root_max = FAT_DIRENTRY_LENGTH * FAT_CVT_U16(bpb.dir_entries); - -printk_debug("RootEntCnt = %d\n", FAT_CVT_U16(bpb.dir_entries)); - - /* Data offset and number of clusters */ - FAT_SUPER->data_offset = - FAT_SUPER->root_offset - + ((FAT_SUPER->root_max - 1) >> FAT_SUPER->sectsize_bits) + 1; - FAT_SUPER->num_clust = - 2 + ((FAT_SUPER->num_sectors - FAT_SUPER->data_offset) - / bpb.sects_per_clust); - FAT_SUPER->sects_per_clust = bpb.sects_per_clust; - - if (!bpb.fat_length) - { - /* This is a FAT32 */ - if (FAT_CVT_U16(bpb.dir_entries)) - return 0; - -printk_debug("We seem to be FAT32\n"); -printk_debug("ExtFlags = 0x%x\n", FAT_CVT_U16(bpb.flags)); -printk_debug("RootClus = %d\n", FAT_CVT_U32(bpb.root_cluster)); - if (FAT_CVT_U16(bpb.flags) & 0x0080) - { - /* FAT mirroring is disabled, get active FAT */ - int active_fat = FAT_CVT_U16(bpb.flags) & 0x000f; - if (active_fat >= bpb.num_fats) - return 0; - FAT_SUPER->fat_offset += active_fat * FAT_SUPER->fat_length; - } - - FAT_SUPER->fat_size = 8; - FAT_SUPER->root_cluster = FAT_CVT_U32(bpb.root_cluster); - - /* Yes the following is correct. FAT32 should be called FAT28 :) */ - FAT_SUPER->clust_eof_marker = 0xffffff8; - } - else - { - if (!FAT_SUPER->root_max) - return 0; - -printk_debug("We seem to be FAT12/16\n"); - FAT_SUPER->root_cluster = -1; - if (FAT_SUPER->num_clust > FAT_MAX_12BIT_CLUST) - { - FAT_SUPER->fat_size = 4; - FAT_SUPER->clust_eof_marker = 0xfff8; - } - else - { - FAT_SUPER->fat_size = 3; - FAT_SUPER->clust_eof_marker = 0xff8; - } - } - - /* Now do some sanity checks */ - - if (FAT_CVT_U16(bpb.bytes_per_sect) != (1 << FAT_SUPER->sectsize_bits) - || FAT_CVT_U16(bpb.bytes_per_sect) != SECTOR_SIZE - || bpb.sects_per_clust != (1 << (FAT_SUPER->clustsize_bits - - FAT_SUPER->sectsize_bits)) - || FAT_SUPER->num_clust <= 2 - || (FAT_SUPER->fat_size * FAT_SUPER->num_clust / (2 * SECTOR_SIZE) - > FAT_SUPER->fat_length)) - return 0; - - /* kbs: Media check on first FAT entry [ported from PUPA] */ - - if (!devread(FAT_SUPER->fat_offset, 0, - sizeof(first_fat), (char *)&first_fat)) - return 0; - -printk_debug("Media = 0x%x\n", bpb.media); - - if (FAT_SUPER->fat_size == 8) - { - first_fat = le32_to_cpu(first_fat) & 0x0fffffff; - magic = 0x0fffff00; - } - else if (FAT_SUPER->fat_size == 4) - { - first_fat = le32_to_cpu(first_fat) & 0x0000ffff; - magic = 0xff00; - } - else - { - first_fat = le32_to_cpu(first_fat) & 0x00000fff; - magic = 0x0f00; - } - - if (first_fat != (magic | bpb.media)) - return 0; - - FAT_SUPER->cached_fat = - 2 * FAT_CACHE_SIZE; - return 1; -} - -int -fat_read (char *buf, int len) -{ - int logical_clust; - int offset; - int ret = 0; - int size; - - if (FAT_SUPER->file_cluster < 0) - { - /* root directory for fat16 */ - size = FAT_SUPER->root_max - filepos; - if (size > len) - size = len; - if (!devread(FAT_SUPER->root_offset, filepos, size, buf)) - return 0; - filepos += size; - return size; - } - - logical_clust = filepos >> FAT_SUPER->clustsize_bits; - offset = (filepos & ((1 << FAT_SUPER->clustsize_bits) - 1)); - if (logical_clust < FAT_SUPER->current_cluster_num) - { - FAT_SUPER->current_cluster_num = 0; - FAT_SUPER->current_cluster = FAT_SUPER->file_cluster; - } - - while (len > 0) - { - int sector; - while (logical_clust > FAT_SUPER->current_cluster_num) - { - /* calculate next cluster */ - int fat_entry = - FAT_SUPER->current_cluster * FAT_SUPER->fat_size; - int next_cluster; - int cached_pos = (fat_entry - FAT_SUPER->cached_fat); - - if (cached_pos < 0 || - (cached_pos + FAT_SUPER->fat_size) > 2*FAT_CACHE_SIZE) - { - FAT_SUPER->cached_fat = (fat_entry & ~(2*SECTOR_SIZE - 1)); - cached_pos = (fat_entry - FAT_SUPER->cached_fat); - sector = FAT_SUPER->fat_offset - + FAT_SUPER->cached_fat / (2*SECTOR_SIZE); - if (!devread (sector, 0, FAT_CACHE_SIZE, (char*) FAT_BUF)) - return 0; - } - next_cluster = FAT_CVT_U32(FAT_BUF + (cached_pos >> 1)); - if (FAT_SUPER->fat_size == 3) - { - if (cached_pos & 1) - next_cluster >>= 4; - next_cluster &= 0xFFF; - } - else if (FAT_SUPER->fat_size == 4) - next_cluster &= 0xFFFF; - - if (next_cluster >= FAT_SUPER->clust_eof_marker) - return ret; - if (next_cluster < 2 || next_cluster >= FAT_SUPER->num_clust) - { - errnum = ERR_FSYS_CORRUPT; - return 0; - } - - FAT_SUPER->current_cluster = next_cluster; - FAT_SUPER->current_cluster_num++; - } - - sector = FAT_SUPER->data_offset + - ((FAT_SUPER->current_cluster - 2) << (FAT_SUPER->clustsize_bits - - FAT_SUPER->sectsize_bits)); - size = (1 << FAT_SUPER->clustsize_bits) - offset; - if (size > len) - size = len; - - disk_read_func = disk_read_hook; - - devread(sector, offset, size, buf); - - disk_read_func = 0; - - len -= size; - buf += size; - ret += size; - filepos += size; - logical_clust++; - offset = 0; - } - return errnum ? 0 : ret; -} - -int -fat_dir (char *dirname) -{ - char *rest, ch, dir_buf[FAT_DIRENTRY_LENGTH]; - char *filename = (char *) NAME_BUF; - int attrib = FAT_ATTRIB_DIR; -#ifndef STAGE1_5 - int do_possibilities = 0; -#endif - - /* XXX I18N: - * the positions 2,4,6 etc are high bytes of a 16 bit unicode char - */ - static unsigned char longdir_pos[] = - { 1, 3, 5, 7, 9, 14, 16, 18, 20, 22, 24, 28, 30 }; - int slot = -2; - int alias_checksum = -1; - - FAT_SUPER->file_cluster = FAT_SUPER->root_cluster; - filepos = 0; - FAT_SUPER->current_cluster_num = MAXINT; - - /* main loop to find desired directory entry */ - loop: - - /* if we have a real file (and we're not just printing possibilities), - then this is where we want to exit */ - - if (!*dirname || isspace (*dirname)) - { - if (attrib & FAT_ATTRIB_DIR) - { - errnum = ERR_BAD_FILETYPE; - return 0; - } - - return 1; - } - - /* continue with the file/directory name interpretation */ - - while (*dirname == '/') - dirname++; - - if (!(attrib & FAT_ATTRIB_DIR)) - { - errnum = ERR_BAD_FILETYPE; - return 0; - } - /* Directories don't have a file size */ - filemax = MAXINT; - - for (rest = dirname; (ch = *rest) && !isspace (ch) && ch != '/'; rest++); - - *rest = 0; - -# ifndef STAGE1_5 - if (print_possibilities && ch != '/') - do_possibilities = 1; -# endif - - while (1) - { - if (fat_read (dir_buf, FAT_DIRENTRY_LENGTH) != FAT_DIRENTRY_LENGTH - || dir_buf[0] == 0) - { - if (!errnum) - { -# ifndef STAGE1_5 - if (print_possibilities < 0) - { -#if 0 - putchar ('\n'); -#endif - return 1; - } -# endif /* STAGE1_5 */ - - errnum = ERR_FILE_NOT_FOUND; - *rest = ch; - } - - return 0; - } - - if (FAT_DIRENTRY_ATTRIB (dir_buf) == FAT_ATTRIB_LONGNAME) - { - /* This is a long filename. The filename is build from back - * to front and may span multiple entries. To bind these - * entries together they all contain the same checksum over - * the short alias. - * - * The id field tells if this is the first entry (the last - * part) of the long filename, and also at which offset this - * belongs. - * - * We just write the part of the long filename this entry - * describes and continue with the next dir entry. - */ - int i, offset; - unsigned char id = FAT_LONGDIR_ID(dir_buf); - - if ((id & 0x40)) - { - id &= 0x3f; - slot = id; - filename[slot * 13] = 0; - alias_checksum = FAT_LONGDIR_ALIASCHECKSUM(dir_buf); - } - - if (id != slot || slot == 0 - || alias_checksum != FAT_LONGDIR_ALIASCHECKSUM(dir_buf)) - { - alias_checksum = -1; - continue; - } - - slot--; - offset = slot * 13; - - for (i=0; i < 13; i++) - filename[offset+i] = dir_buf[longdir_pos[i]]; - continue; - } - - if (!FAT_DIRENTRY_VALID (dir_buf)) - continue; - - if (alias_checksum != -1 && slot == 0) - { - int i; - unsigned char sum; - - slot = -2; - for (sum = 0, i = 0; i< 11; i++) - sum = ((sum >> 1) | (sum << 7)) + dir_buf[i]; - - if (sum == alias_checksum) - { -# ifndef STAGE1_5 - if (do_possibilities) - goto print_filename; -# endif /* STAGE1_5 */ - - if (substring (dirname, filename) == 0) - break; - } - } - - /* XXX convert to 8.3 filename format here */ - { - int i, j, c; - - for (i = 0; i < 8 && (c = filename[i] = tolower (dir_buf[i])) - && !isspace (c); i++); - - filename[i++] = '.'; - - for (j = 0; j < 3 && (c = filename[i + j] = tolower (dir_buf[8 + j])) - && !isspace (c); j++); - - if (j == 0) - i--; - - filename[i + j] = 0; - } - -# ifndef STAGE1_5 - if (do_possibilities) - { - print_filename: - if (substring (dirname, filename) <= 0) - { - if (print_possibilities > 0) - print_possibilities = -print_possibilities; - print_a_completion (filename); - } - continue; - } -# endif /* STAGE1_5 */ - - if (substring (dirname, filename) == 0) - break; - } - - *(dirname = rest) = ch; - - attrib = FAT_DIRENTRY_ATTRIB (dir_buf); - filemax = FAT_DIRENTRY_FILELENGTH (dir_buf); - filepos = 0; - FAT_SUPER->file_cluster = FAT_DIRENTRY_FIRST_CLUSTER (dir_buf); - FAT_SUPER->current_cluster_num = MAXINT; - - /* go back to main loop at top of function */ - goto loop; -} diff --git a/src/stream/fs/iso9660.c b/src/stream/fs/iso9660.c deleted file mode 100644 index 9d36a5cf54..0000000000 --- a/src/stream/fs/iso9660.c +++ /dev/null @@ -1,338 +0,0 @@ -/* - * ISO 9660 filesystem backend for GRUB (GRand Unified Bootloader) - * including Rock Ridge Extensions support - * - * Copyright (C) 1998, 1999 Kousuke Takai <tak@kmc.kyoto-u.ac.jp> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -/* - * References: - * linux/fs/isofs/rock.[ch] - * mkisofs-1.11.1/diag/isoinfo.c - * mkisofs-1.11.1/iso9660.h - * (all are written by Eric Youngdale) - * - * Modifications by: - * Leonid Lisovskiy <lly@pisem.net> 2003 - */ - -/* - * Modified to make it work with FILO - * 2003-10 by SONE Takeshi - */ - -#include <console/console.h> -#include <fs/fs.h> -#include <fs/iso9660.h> -#include <string.h> - -struct iso_superblock { - unsigned long vol_sector; - - unsigned long file_start; -}; - -#define ISO_SUPER ((struct iso_superblock *)(FSYS_BUF)) -#define PRIMDESC ((struct iso_primary_descriptor *)(FSYS_BUF + 2048)) -#define DIRREC ((struct iso_directory_record *)(FSYS_BUF + 4096)) -#define RRCONT_BUF ((unsigned char *)(FSYS_BUF + 6144)) -#define NAME_BUF ((unsigned char *)(FSYS_BUF + 8192)) - -static int -iso9660_devread (int sector, int byte_offset, int byte_len, char *buf) -{ - /* FILO uses 512-byte "soft" sector, and ISO-9660 uses 2048-byte - * CD-ROM sector */ - return devread(sector<<2, byte_offset, byte_len, buf); -} - -int -iso9660_mount (void) -{ - unsigned int sector; - - /* - * Because there is no defined slice type ID for ISO-9660 filesystem, - * this test will pass only either (1) if entire disk is used, or - * (2) if current partition is BSD style sub-partition whose ID is - * ISO-9660. - */ - /*if ((current_partition != 0xFFFFFF) - && !IS_PC_SLICE_TYPE_BSD_WITH_FS(current_slice, FS_ISO9660)) - return 0;*/ - - /* - * Currently, only FIRST session of MultiSession disks are supported !!! - */ - for (sector = 16 ; sector < 32 ; sector++) - { - if (!iso9660_devread(sector, 0, sizeof(*PRIMDESC), (char *)PRIMDESC)) - break; - /* check ISO_VD_PRIMARY and ISO_STANDARD_ID */ - if (isonum_711(PRIMDESC->type) == ISO_VD_PRIMARY && - !__builtin_memcmp(PRIMDESC->id, "CD001", 5)) - { - ISO_SUPER->vol_sector = sector; - ISO_SUPER->file_start = 0; - fsmax = isonum_733(PRIMDESC->volume_space_size); - return 1; - } - } - - return 0; -} - -int -iso9660_dir (char *dirname) -{ - struct iso_directory_record *idr; - RR_ptr_t rr_ptr; - struct rock_ridge *ce_ptr; - unsigned int pathlen; - int size; - unsigned int extent; - unsigned int rr_len; - unsigned char file_type; - unsigned char rr_flag; - - idr = (struct iso_directory_record *)&PRIMDESC->root_directory_record; - ISO_SUPER->file_start = 0; - - do - { - while (*dirname == '/') /* skip leading slashes */ - dirname++; - /* pathlen = strcspn(dirname, "/\n\t "); */ - for (pathlen = 0 ; - dirname[pathlen] - && !isspace(dirname[pathlen]) && dirname[pathlen] != '/' ; - pathlen++) - ; - - size = isonum_733(idr->size); - extent = isonum_733(idr->extent); - - while (size > 0) - { - if (!iso9660_devread(extent, 0, ISO_SECTOR_SIZE, (char *)DIRREC)) - { - errnum = ERR_FSYS_CORRUPT; - return 0; - } - extent++; - - idr = (struct iso_directory_record *)DIRREC; - for (; isonum_711(idr->length) > 0; - idr = (struct iso_directory_record *)((char *)idr + isonum_711(idr->length)) ) - { - const char *name = idr->name; - unsigned int name_len = isonum_711(idr->name_len); - - file_type = (isonum_711(idr->flags) & 2) ? ISO_DIRECTORY : ISO_REGULAR; - if (name_len == 1) - { - if ((name[0] == 0) || /* self */ - (name[0] == 1)) /* parent */ - continue; - } - if (name_len > 2 && - name[name_len - 2] == ';' && - name[name_len - 1] == '1') - { - name_len -= 2; /* truncate trailing file version */ - if (name_len > 1 && name[name_len - 1] == '.') - name_len--; /* truncate trailing dot */ - } - - /* - * Parse Rock-Ridge extension - */ - rr_len = (isonum_711(idr->length) - isonum_711(idr->name_len) - - sizeof(struct iso_directory_record) - + sizeof(idr->name)); - rr_ptr.ptr = ((unsigned char *)idr + isonum_711(idr->name_len) - + sizeof(struct iso_directory_record) - - sizeof(idr->name)); - if (rr_ptr.i & 1) - rr_ptr.i++, rr_len--; - ce_ptr = 0; - rr_flag = RR_FLAG_NM | RR_FLAG_PX; - - while (rr_len >= 4) - { - if (rr_ptr.rr->version != 1) - { -#ifndef STAGE1_5 - if (debug) - printk_debug( - "Non-supported version (%d) RockRidge chunk " - "`%c%c'\n", rr_ptr.rr->version, - rr_ptr.rr->signature[0], - rr_ptr.rr->signature[1]); -#endif - break; - } - else if (rr_ptr.rr->signature[0] == 'R' - && rr_ptr.rr->signature[1] == 'R' - && rr_ptr.rr->len >= 5) - rr_flag &= isonum_711(rr_ptr.rr->u.RR.flags); - else if (rr_ptr.rr->signature[0] == 'N' - && rr_ptr.rr->signature[1] == 'M') - { - name = rr_ptr.rr->u.NM.name; - name_len = rr_ptr.rr->len - 5; - rr_flag &= ~RR_FLAG_NM; - } - else if (rr_ptr.rr->signature[0] == 'P' - && rr_ptr.rr->signature[1] == 'X' - && rr_ptr.rr->len >= 36) - { - unsigned int mode = isonum_733(rr_ptr.rr->u.PX.mode); - file_type = ((mode & POSIX_S_IFMT) - == POSIX_S_IFREG - ? ISO_REGULAR - : ((mode & POSIX_S_IFMT) - == POSIX_S_IFDIR - ? ISO_DIRECTORY : ISO_OTHER)); - rr_flag &= ~RR_FLAG_PX; - } - else if (rr_ptr.rr->signature[0] == 'C' - && rr_ptr.rr->signature[1] == 'E' - && rr_ptr.rr->len >= 28) - ce_ptr = rr_ptr.rr; - if (!rr_flag) - /* - * There is no more extension we expects... - */ - break; - rr_len -= rr_ptr.rr->len; - rr_ptr.ptr += rr_ptr.rr->len; - if (rr_len < 4 && ce_ptr != 0) - { - /* preserve name before loading new extent. */ - if( RRCONT_BUF <= (unsigned char *)name - && (unsigned char *)name < RRCONT_BUF + ISO_SECTOR_SIZE ) - { - memcpy(NAME_BUF, name, name_len); - name = NAME_BUF; - } - rr_ptr.ptr = RRCONT_BUF + isonum_733(ce_ptr->u.CE.offset); - rr_len = isonum_733(ce_ptr->u.CE.size); - if (!iso9660_devread(isonum_733(ce_ptr->u.CE.extent), 0, ISO_SECTOR_SIZE, RRCONT_BUF)) - { - errnum = 0; /* this is not fatal. */ - break; - } - ce_ptr = 0; - } - } /* rr_len >= 4 */ - - filemax = MAXINT; - if (name_len >= pathlen - && !__builtin_memcmp(name, dirname, pathlen)) - { - if (dirname[pathlen] == '/' || !print_possibilities) - { - /* - * DIRNAME is directory component of pathname, - * or we are to open a file. - */ - if (pathlen == name_len) - { - if (dirname[pathlen] == '/') - { - if (file_type != ISO_DIRECTORY) - { - errnum = ERR_BAD_FILETYPE; - return 0; - } - goto next_dir_level; - } - if (file_type != ISO_REGULAR) - { - errnum = ERR_BAD_FILETYPE; - return 0; - } - ISO_SUPER->file_start = isonum_733(idr->extent); - filepos = 0; - filemax = isonum_733(idr->size); - return 1; - } - } - else /* Completion */ - { -#ifndef STAGE1_5 - if (print_possibilities > 0) - print_possibilities = -print_possibilities; - memcpy(NAME_BUF, name, name_len); - NAME_BUF[name_len] = '\0'; - print_a_completion (NAME_BUF); -#endif - } - } - } /* for */ - - size -= ISO_SECTOR_SIZE; - } /* size>0 */ - - if (dirname[pathlen] == '/' || print_possibilities >= 0) - { - errnum = ERR_FILE_NOT_FOUND; - return 0; - } - -next_dir_level: - dirname += pathlen; - - } while (*dirname == '/'); - - return 1; -} - -int -iso9660_read (char *buf, int len) -{ - int sector, blkoffset, size, ret; - - if (ISO_SUPER->file_start == 0) - return 0; - - ret = 0; - blkoffset = filepos & (ISO_SECTOR_SIZE - 1); - sector = filepos >> ISO_SECTOR_BITS; - while (len > 0) - { - size = ISO_SECTOR_SIZE - blkoffset; - if (size > len) - size = len; - - disk_read_func = disk_read_hook; - - if (!iso9660_devread(ISO_SUPER->file_start + sector, blkoffset, size, buf)) - return 0; - - disk_read_func = 0; - - len -= size; - buf += size; - ret += size; - filepos += size; - sector++; - blkoffset = 0; - } - - return ret; -} diff --git a/src/stream/fs/vfs.c b/src/stream/fs/vfs.c deleted file mode 100644 index 4a298cef2a..0000000000 --- a/src/stream/fs/vfs.c +++ /dev/null @@ -1,176 +0,0 @@ -/* Interface between GRUB's fs drivers and application code */ - -#include <console/console.h> -#include <fs/fs.h> -#include <string.h> -#include <stdlib.h> - -int filepos; -int filemax; -fs_error_t errnum; -void (*disk_read_hook) (int, int, int); -void (*disk_read_func) (int, int, int); -char FSYS_BUF[FSYS_BUFLEN]; -int fsmax; - -struct fsys_entry { - char *name; - int (*mount_func) (void); - int (*read_func) (char *buf, int len); - int (*dir_func) (char *dirname); - void (*close_func) (void); - int (*embed_func) (int *start_sector, int needed_sectors); -}; - -struct fsys_entry fsys_table[] = { -# if CONFIG_FS_FAT == 1 - {"fat", fat_mount, fat_read, fat_dir, 0, 0}, -# endif -# if CONFIG_FS_EXT2 == 1 - {"ext2fs", ext2fs_mount, ext2fs_read, ext2fs_dir, 0, 0}, -# endif -# if CONFIG_FS_ISO9660 == 1 - {"iso9660", iso9660_mount, iso9660_read, iso9660_dir, 0, 0}, -# endif -}; - -/* NULLFS is used to read images from raw device */ -static int nullfs_dir(char *name) -{ - uint64_t dev_size; - - if (name) { - printk_debug("can't have a named file\n"); - return 0; - } - - dev_size = (uint64_t) part_length << 9; - /* GRUB code doesn't like 2GB or bigger files */ - if (dev_size > 0x7fffffff) - dev_size = 0x7fffffff; - filemax = dev_size; - return 1; -} - -static int nullfs_read(char *buf, int len) -{ - if (devread(filepos>>9, filepos&0x1ff, len, buf)) { - filepos += len; - return len; - } else - return 0; -} - -static struct fsys_entry nullfs = - {"nullfs", 0, nullfs_read, nullfs_dir, 0, 0}; - -static struct fsys_entry *fsys; - -int mount_fs(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(fsys_table); i++) { - if (fsys_table[i].mount_func()) { - fsys = &fsys_table[i]; - printk_info("Mounted %s\n", fsys->name); - return 1; - } - } - fsys = 0; - printk_info("Unknown filesystem type\n"); - return 0; -} - -int file_open(const char *filename) -{ - char *dev = 0; - const char *path; - int len; - int retval = 0; - int reopen; - - path = strchr(filename, ':'); - if (path) { - len = path - filename; - path++; - dev = malloc(len + 1); - memcpy(dev, filename, len); - dev[len] = '\0'; - } else { - /* No colon is given. Is this device or filename? */ - if (filename[0] == '/') { - /* Anything starts with '/' must be a filename */ - dev = 0; - path = filename; - } else { - dev = strdup(filename); - path = 0; - } - } - - if (dev && dev[0]) { - if (!devopen(dev, &reopen)) { - fsys = 0; - goto out; - } - if (!reopen) - fsys = 0; - } - - if (path) { - if (!fsys || fsys==&nullfs) { - if (!mount_fs()) - goto out; - } - using_devsize = 0; - if (!path[0]) { - printk_info("No filename is given\n"); - goto out; - } - } else - fsys = &nullfs; - - filepos = 0; - errnum = 0; - if (!fsys->dir_func((char *) path)) { - printk_info("File not found\n"); - goto out; - } - retval = 1; -out: - if (dev) - free(dev); - return retval; -} - -int file_read(void *buf, unsigned long len) -{ - if (filepos < 0 || filepos > filemax) - filepos = filemax; - if (len < 0 || len > filemax-filepos) - len = filemax - filepos; - errnum = 0; - return fsys->read_func(buf, len); -} - -int file_seek(unsigned long offset) -{ - filepos = offset; - return filepos; -} - -unsigned long file_pos(void) -{ - return filepos; -} - -unsigned long file_size(void) -{ - return filemax; -} - -void file_close(void) -{ -} - diff --git a/src/stream/fs_stream.c b/src/stream/fs_stream.c deleted file mode 100644 index 7d911e62e1..0000000000 --- a/src/stream/fs_stream.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <console/console.h> -#include <stdlib.h> -#include <stddef.h> -#include <stream/read_bytes.h> -#include <string.h> -#include <fs/fs.h> - -char *boot_file; - -int stream_init(void) -{ - return file_open(boot_file); -} - - -void stream_fini(void) -{ - return; -} - -byte_offset_t stream_skip(byte_offset_t count) -{ - unsigned long pos = file_pos(); - if (file_seek(count+pos) != count+pos) - return 0; - return count; -} - -byte_offset_t stream_read(void *vdest, byte_offset_t count) -{ - return file_read(vdest, count); -} diff --git a/src/stream/ide_stream.c b/src/stream/ide_stream.c deleted file mode 100644 index 8cf51920ab..0000000000 --- a/src/stream/ide_stream.c +++ /dev/null @@ -1,98 +0,0 @@ -#include <console/console.h> -#include <stdlib.h> -#include <stddef.h> -#include <stream/read_bytes.h> -#include <delay.h> -#include <string.h> -#include <pc80/ide.h> - -#ifndef CONFIG_IDE_BOOT_DRIVE -#define CONFIG_IDE_BOOT_DRIVE 0 -#endif - -static unsigned long offset; - -int stream_init(void) -{ - int i,res; - - printk_debug ("Trying polled ide\n"); - printk_debug ("Waiting for ide disks to spin up\n"); - printk_notice ("This is a hard coded delay and longer than necessary.\n"); - for (i = 0; i < 2; i++) { - printk_notice ("."); - delay(1); - } - printk_info ("\n"); - -#ifdef ONE_TRACK - offset = (ONE_TRACK*512); -#elif defined(CONFIG_IDE_OFFSET) - offset = CONFIG_IDE_OFFSET; -#else - offset = 0x7e00; -#endif - res = ide_probe(CONFIG_IDE_BOOT_DRIVE); - delay(1); - return res; -} - -void stream_fini(void) -{ - return; -} - -static unsigned char buffer[512]; -static unsigned int block_num = 0; -static unsigned int first_fill = 1; - -static byte_offset_t stream_ide_read(void *vdest, byte_offset_t offs, byte_offset_t count) -{ - byte_offset_t bytes = 0; - unsigned char *dest = vdest; - - //printk_debug("stream_ide_read count = %x\n", count); - while (bytes < count) { - unsigned int byte_offset, len; - - /* The block is not cached in memory or frist time called */ - if (block_num != offs / 512 || first_fill) { - block_num = offs / 512; - printk_notice ("."); - ide_read(CONFIG_IDE_BOOT_DRIVE, block_num, buffer); - first_fill = 0; - } - - byte_offset = offs % 512; - len = 512 - byte_offset; - if (len > (count - bytes)) { - len = (count - bytes); - } - - memcpy(dest, buffer + byte_offset, len); - - offs += len; - bytes += len; - dest += len; - - } - return bytes; -} - -byte_offset_t stream_read(void *vdest, byte_offset_t count) -{ - byte_offset_t len; - - len = stream_ide_read(vdest, offset, count); - if (len > 0) { - offset += len; - } - - return len; -} - -byte_offset_t stream_skip(byte_offset_t count) -{ - offset += count; - return count; -} diff --git a/src/stream/rom_stream.c b/src/stream/rom_stream.c deleted file mode 100644 index 2c8699d2c5..0000000000 --- a/src/stream/rom_stream.c +++ /dev/null @@ -1,145 +0,0 @@ -#include <console/console.h> -#include <stdlib.h> -#include <stddef.h> -#include <stream/read_bytes.h> -#include <string.h> - -/* if they set the precompressed rom stream, they better have set a type */ -#if CONFIG_PRECOMPRESSED_PAYLOAD && ((!CONFIG_COMPRESSED_PAYLOAD_NRV2B) && (!CONFIG_COMPRESSED_PAYLOAD_LZMA)) -#error "You set CONFIG_PRECOMPRESSED_PAYLOAD but need to set CONFIG_COMPRESSED_PAYLOAD_NRV2B or CONFIG_COMPRESSED_PAYLOAD_LZMA" -#endif - -/* If they set ANY of these, then we're compressed */ -#if ((CONFIG_COMPRESSED_PAYLOAD_NRV2B) || (CONFIG_COMPRESSED_PAYLOAD_LZMA)) -#define UNCOMPRESSER 1 -extern unsigned char _heap, _eheap; -#endif - -#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B) -#define HAVE_UNCOMPRESSER 1 -#include "../lib/nrv2b.c" -#endif - -#if (CONFIG_COMPRESSED_PAYLOAD_LZMA) -#ifdef HAVE_UNCOMPRESSER -#error "You're defining more than one compression type, which is not allowed." -#endif -#define HAVE_UNCOMPRESSER 1 -unsigned long ulzma(unsigned char *src, unsigned char *dst); -#endif - -#ifndef CONFIG_ROM_PAYLOAD_START -#define CONFIG_ROM_PAYLOAD_START 0xffff0000UL -#endif - -/* well, this is a mess, and it will get fixed, but not right away. - * until we stop using 'ld' for building the rom image, that is. - * problem is, that on the sc520, ROM_PAYLOAD_START has to be at 0x2000000. - * but if you set CONFIG_ROM_PAYLOAD_START to that, then ld will try to - * build a giant image: 0x0-0x2000000, i.e. almost 4 GB. - * so make this non-static, non-const for now. - */ - -/*XXXXXXXXXXXXXX */ -unsigned char *rom_start = (unsigned char *)CONFIG_ROM_PAYLOAD_START; -unsigned char *rom_end = (unsigned char *)(CONFIG_ROM_PAYLOAD_START + CONFIG_PAYLOAD_SIZE - 1); -/*XXXXXXXXXXXXXX */ - -static const unsigned char *rom; - -#ifdef UNCOMPRESSER -unsigned long -uncompress(uint8_t * start_addr, uint8_t *dest_addr) -{ -#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B) - unsigned long ilen; // used compressed stream length - return unrv2b(start_addr, dest_addr, &ilen); -#endif -#if (CONFIG_COMPRESSED_PAYLOAD_LZMA) - return ulzma(start_addr, dest_addr); -#endif -} -#endif - -int stream_init(void) -{ -#ifdef UNCOMPRESSER - unsigned char *dest; - unsigned long olen; -#endif - - printk_debug("rom_stream: 0x%08lx - 0x%08lx\n", - (unsigned long)rom_start, - (unsigned long)rom_end); - -#ifdef UNCOMPRESSER - - dest = &_eheap; /* need a good address on RAM */ - -#if CONFIG_RAMBASE<0x00100000 - olen = *(unsigned int *)dest; -#if (CONFIG_CONSOLE_VGA==1) || (CONFIG_PCI_ROM_RUN == 1) - if((dest < (unsigned char *)0xa0000) && ((dest+olen)>(unsigned char *)0xa0000)) { - dest = (unsigned char *)(CONFIG_LB_MEM_TOPK<<10); - } -#endif - if((dest < (unsigned char *) 0xf0000) && ((dest+olen)> (unsigned char *)0xf0000)) { // coreboot tables etc - dest = (unsigned char *) (CONFIG_LB_MEM_TOPK<<10); - } -#endif - - /* ALL of those settings are too smart and also unsafe. Set the dest to 16 MB: - * known to be safe for LB for now, and mostly safe for all elf images we have tried. - * long term, this has got to be fixed. - */ - dest = (unsigned char *) (16 * 1024 * 1024); - printk_debug("Uncompressing to RAM %p ", dest); - olen = uncompress((uint8_t *) rom_start, (uint8_t *)dest ); - printk_debug(" olen = 0x%08lx done.\n", olen); - if (olen != 0) { - rom_end = dest + olen - 1; - rom = dest; - } else { - /* Decompression failed, assume payload is uncompressed */ - printk_debug("Decompression failed. Assuming payload is uncompressed...\n"); - rom = rom_start; - } -#else - rom = rom_start; -#endif - - return 0; -} - - -void stream_fini(void) -{ - return; -} - -byte_offset_t stream_skip(byte_offset_t count) -{ - byte_offset_t bytes; - bytes = count; - if ((rom + bytes - 1) > rom_end) { - printk_warning("%6d:%s() - overflowed source buffer\n", - __LINE__, __func__); - bytes = 0; - if (rom <= rom_end) { - bytes = (rom_end - rom) + 1; - } - } - rom += bytes; - return bytes; -} - -byte_offset_t stream_read(void *vdest, byte_offset_t count) -{ - unsigned char *dest = vdest; - const unsigned char *src = rom; - byte_offset_t bytes; - - bytes = stream_skip(count); - memcpy(dest, src, bytes); - return bytes; -} diff --git a/src/stream/serial_stream.c b/src/stream/serial_stream.c deleted file mode 100644 index 078727b51a..0000000000 --- a/src/stream/serial_stream.c +++ /dev/null @@ -1,92 +0,0 @@ -#include <console/console.h> -#include <stdlib.h> -#include <stddef.h> -#include <stream/read_bytes.h> -#include <string.h> - -/* if they set the precompressed rom stream, they better have set a type */ -#if CONFIG_PRECOMPRESSED_PAYLOAD && ((!CONFIG_COMPRESSED_PAYLOAD_NRV2B) && (!CONFIG_COMPRESSED_PAYLOAD_LZMA)) -#error "You set CONFIG_PRECOMPRESSED_PAYLOAD but need to set CONFIG_COMPRESSED_PAYLOAD_NRV2B or CONFIG_COMPRESSED_PAYLOAD_LZMA" -#endif - -#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B) -#define HAVE_UNCOMPRESSER 1 -#include "../lib/nrv2b.c" -#endif - -#if (CONFIG_COMPRESSED_PAYLOAD_LZMA) -#if HAVE_UNCOMPRESSER -#error "You're defining more than one compression type, which is not allowed (of course)" -#endif -#define HAVE_UNCOMPRESSER 1 -unsigned long ulzma(unsigned char *src, unsigned char *dst); -#endif - -#include "../lib/xmodem.c" - -/* Blocks of RAM for storing stream data */ -static unsigned char *stream_start = (unsigned char *) 0x02000000; -static unsigned char *stream_end; -static unsigned char *temp_start = (unsigned char *) 0x03000000; -static int stream_max_bytes = 0x00800000; - -#if HAVE_UNCOMPRESSER -static unsigned long uncompress(uint8_t *src, uint8_t *dest) -{ -#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B) - unsigned long ilen; - return unrv2b(src, dest, &ilen); -#endif -#if (CONFIG_COMPRESSED_PAYLOAD_LZMA) - return ulzma(src, dest); -#endif -} -#endif - -int stream_init(void) -{ - int len; - - printk_debug("serial_stream: downloading to 0x%08lx; start XMODEM transfer now!\n", temp_start); - if ((len = xmodemReceive(temp_start, stream_max_bytes)) <= 0) { - printk_debug("\nserial_stream: XMODEM transfer failed\n"); - return -1; - } - printk_debug("\nserial_stream: XMODEM transfer complete; %d bytes received\n", len); -#if HAVE_UNCOMPRESSER - printk_debug("serial_stream: uncompressing to 0x%08lx\n", stream_start); - len = uncompress((uint8_t *) temp_start, (uint8_t *) stream_start); - printk_debug("serial_stream: %d bytes uncompressed\n", len); -#else - printk_debug("serial_stream: copying to 0x%08lx\n", stream_start); - memcpy(stream_start, temp_start, len); -#endif - stream_end = stream_start + len - 1; - return 0; -} - -void stream_fini(void) -{ -} - -byte_offset_t stream_skip(byte_offset_t count) -{ - if ((stream_start + count) > stream_end) { - printk_warning("%6d:%s() - overflowed source buffer\n", - __LINE__, __func__); - count = 0; - if (stream_start <= stream_end) { - count = (stream_end - stream_start) + 1; - } - } - stream_start += count; - return count; -} - -byte_offset_t stream_read(void *vdest, byte_offset_t count) -{ - unsigned char *old_start = stream_start; - count = stream_skip(count); - memcpy(vdest, old_start, count); - return count; -} diff --git a/targets/kontron/986lcd-m/Config.lb b/targets/kontron/986lcd-m/Config.lb index 8cb6b98b4c..5a4fd47350 100644 --- a/targets/kontron/986lcd-m/Config.lb +++ b/targets/kontron/986lcd-m/Config.lb @@ -5,7 +5,6 @@ mainboard kontron/986lcd-m ## (normal AND fallback images and payloads). option CONFIG_ROM_SIZE = 1024 * 1024 -option CONFIG_CBFS=1 option HAVE_HIGH_TABLES=1 option MAXIMUM_CONSOLE_LOGLEVEL=9 option DEFAULT_CONSOLE_LOGLEVEL=9 diff --git a/targets/lippert/roadrunner-lx/Config.lb b/targets/lippert/roadrunner-lx/Config.lb index 92b825c407..1fb1bbb3ff 100644 --- a/targets/lippert/roadrunner-lx/Config.lb +++ b/targets/lippert/roadrunner-lx/Config.lb @@ -30,14 +30,6 @@ option CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 option CONFIG_COMPRESSED_PAYLOAD_NRV2B = 0 option CONFIG_COMPRESSED_PAYLOAD_LZMA = 0 -## Load payload (e.g. Linux) from IDE. -#option CONFIG_ROM_PAYLOAD = 0 -#option CONFIG_IDE = 1 -#option CONFIG_FS_PAYLOAD = 1 -#option CONFIG_FS_EXT2 = 1 -#option CONFIG_AUTOBOOT_DELAY = 0 -#option CONFIG_AUTOBOOT_CMDLINE = "hda1:/payload.elf" - # Leave 36k for VSA. Usually board is equipped with a 512 KB FWH (LPC) flash, # however it can be replaced with a 1 MB chip. option CONFIG_ROM_SIZE = (512 * 1024) - (36 * 1024) diff --git a/targets/lippert/spacerunner-lx/Config.lb b/targets/lippert/spacerunner-lx/Config.lb index 6719c212f0..9fa4b5a44e 100644 --- a/targets/lippert/spacerunner-lx/Config.lb +++ b/targets/lippert/spacerunner-lx/Config.lb @@ -31,14 +31,6 @@ option CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 option CONFIG_COMPRESSED_PAYLOAD_NRV2B = 0 option CONFIG_COMPRESSED_PAYLOAD_LZMA = 0 -## Load payload (e.g. Linux) from IDE. -#option CONFIG_ROM_PAYLOAD = 0 -#option CONFIG_IDE = 1 -#option CONFIG_FS_PAYLOAD = 1 -#option CONFIG_FS_EXT2 = 1 -#option CONFIG_AUTOBOOT_DELAY = 0 -#option CONFIG_AUTOBOOT_CMDLINE = "hda1:/payload.elf" - # Leave 36k for VSA. Board is equipped with a 1 MB SPI flash, however, due to # limitations of the IT8712F Super I/O, only the top 512 KB are directly mapped. option CONFIG_ROM_SIZE = (512 * 1024) - (36 * 1024) diff --git a/util/abuild/abuild b/util/abuild/abuild index 9a90f6f534..00329be6e9 100755 --- a/util/abuild/abuild +++ b/util/abuild/abuild @@ -176,20 +176,12 @@ EOF cat <<EOF romimage "normal" option CONFIG_USE_FALLBACK_IMAGE=0 -if CONFIG_CBFS -else - option CONFIG_ROM_IMAGE_SIZE=0x17000 -end option COREBOOT_EXTRA_VERSION=".0-normal" payload __PAYLOAD__ end romimage "fallback" option CONFIG_USE_FALLBACK_IMAGE=1 -if CONFIG_CBFS -else - option CONFIG_ROM_IMAGE_SIZE=0x17000 -end option COREBOOT_EXTRA_VERSION=".0-fallback" payload __PAYLOAD__ end diff --git a/util/newconfig/config.g b/util/newconfig/config.g index 2f5dddfc2d..2fba72be77 100644 --- a/util/newconfig/config.g +++ b/util/newconfig/config.g @@ -2247,7 +2247,7 @@ def writemakefile(path): file = safe_open(makefilepath, 'w+') writemakefileheader(file, makefilepath) - # Hack to get the necessary settings (CONFIG_CBFS): + # Hack to get the necessary settings (CONFIG_COMPRESSED_PAYLOAD_LZMA): file.write("include %s/Makefile.settings\n\n" % romimages.keys()[0]) # main rule @@ -2275,7 +2275,6 @@ def writemakefile(path): file.write("base-clean:\n") file.write("\trm -f romcc*\n\n") - file.write("ifeq \"$(CONFIG_CBFS)\" \"1\"\n\n") file.write("CBFS_COMPRESS_FLAG:=\n") file.write("CBFS_STAGE_COMPRESS_FLAG:=\n") file.write("ifeq \"$(CONFIG_COMPRESSED_PAYLOAD_LZMA)\" \"1\"\nCBFS_COMPRESS_FLAG:=l\nendif\n\n") @@ -2309,19 +2308,6 @@ def writemakefile(path): file.write("\tif [ -f %s/coreboot_apc ]; then ./cbfs/cbfstool %s add-stage %s/coreboot_apc %s/coreboot_apc $(CBFS_COMPRESS_FLAG); fi\n" % (j, i.name, j, j,)) file.write("\t./cbfs/cbfstool %s print\n" % i.name) file.write("\n") - file.write("else\n\n") - - for i in buildroms: - file.write("%s:" % i.name) - for j in i.roms: - file.write(" %s/coreboot.rom " % j) - file.write("\n") - file.write("\t cat ") - for j in i.roms: - file.write(" %s/coreboot.rom " % j) - file.write("> %s\n\n" %i.name) - - file.write("endif\n\n") file.write(".PHONY: all clean cbfstool") for i in romimages.keys(): |