diff options
| -rw-r--r-- | src/mainboard/google/dedede/variants/boten/overridetree.cb | 97 |
1 files changed, 93 insertions, 4 deletions
diff --git a/src/mainboard/google/dedede/variants/boten/overridetree.cb b/src/mainboard/google/dedede/variants/boten/overridetree.cb index 61dff93993..2ba6d9d665 100644 --- a/src/mainboard/google/dedede/variants/boten/overridetree.cb +++ b/src/mainboard/google/dedede/variants/boten/overridetree.cb @@ -11,7 +11,6 @@ chip soc/intel/jasperlake #| I2C0 | Trackpad | #| I2C1 | Digitizer | #| I2C2 | Touchscreen | - #| I2C3 | Camera | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ @@ -28,14 +27,104 @@ chip soc/intel/jasperlake .i2c[2] = { .speed = I2C_SPEED_FAST, }, - .i2c[3] = { - .speed = I2C_SPEED_FAST, - }, .i2c[4] = { .speed = I2C_SPEED_FAST, }, }" + + # USB Port Configuration + register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Not Used + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # UF Camera + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # WF Camera + + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + device domain 0 on + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""LTE"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""UFCamera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.5 on end + end + chip drivers/usb/acpi + register "desc" = ""WFCamera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.6 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""LTE"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.3 on end + end + end + end + end # USB xHCI + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_03" + register "probed" = "1" + device i2c 15 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)" + register "generic.wake" = "GPE0_DW0_03" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 0x2c on end + end + end # I2C 0 + device pci 15.2 on + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" + register "generic.reset_delay_ms" = "120" + register "generic.reset_off_delay_ms" = "3" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" + register "generic.enable_delay_ms" = "12" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 0x5d on end + end + end # I2C 2 + device pci 15.3 off end # I2C 3 device pci 19.0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" |