diff options
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/tigerlake/FirmwareVersionInfoHob.h | 68 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspUpd.h | 48 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h | 3543 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h | 4219 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/tigerlake/MemInfoHob.h | 290 |
5 files changed, 0 insertions, 8168 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FirmwareVersionInfoHob.h deleted file mode 100644 index 98a16d7752..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FirmwareVersionInfoHob.h +++ /dev/null @@ -1,68 +0,0 @@ -/** @file - Header file for Firmware Version Information - - @copyright - Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR> - - This program and the accompanying materials are licensed and made available under - the terms and conditions of the BSD License which accompanies this distribution. - The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ -#define _FIRMWARE_VERSION_INFO_HOB_H_ - -#include <Uefi/UefiMultiPhase.h> -#include <Pi/PiBootMode.h> -#include <Pi/PiHob.h> - -#pragma pack(1) -/// -/// Firmware Version Structure -/// -typedef struct { - UINT8 MajorVersion; - UINT8 MinorVersion; - UINT8 Revision; - UINT16 BuildNumber; -} FIRMWARE_VERSION; - -/// -/// Firmware Version Information Structure -/// -typedef struct { - UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name - UINT8 VersionStringIndex; ///< Offset 1 Index of Version String - FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version -} FIRMWARE_VERSION_INFO; - -#ifndef __SMBIOS_STANDARD_H__ -/// -/// The Smbios structure header. -/// -typedef struct { - UINT8 Type; - UINT8 Length; - UINT16 Handle; -} SMBIOS_STRUCTURE; -#endif - -/// -/// Firmware Version Information HOB Structure -/// -typedef struct { - EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB - SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB - UINT8 Count; ///< Offset 28 Number of FVI elements included. -/// -/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer -/// -} FIRMWARE_VERSION_INFO_HOB; -#pragma pack() - -#endif // _FIRMWARE_VERSION_INFO_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspUpd.h deleted file mode 100644 index 235780a40a..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspUpd.h +++ /dev/null @@ -1,48 +0,0 @@ -/** @file - -Copyright (c) 2021, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPUPD_H__ -#define __FSPUPD_H__ - -#include <FspEas.h> - -#pragma pack(1) - -#define FSPT_UPD_SIGNATURE 0x545F4450554C4754 /* 'TGLUPD_T' */ - -#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4754 /* 'TGLUPD_M' */ - -#define FSPS_UPD_SIGNATURE 0x535F4450554C4754 /* 'TGLUPD_S' */ - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h deleted file mode 100644 index 6210f3c5cb..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h +++ /dev/null @@ -1,3543 +0,0 @@ -/** @file - -Copyright (c) 2021, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPMUPD_H__ -#define __FSPMUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - - -#include <MemInfoHob.h> - -/// -/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. -/// -typedef struct { - UINT8 Revision; ///< Chipset Init Info Revision - UINT8 Rsvd[3]; ///< Reserved - UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table - UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table -} CHIPSET_INIT_INFO; - - -/** Fsp M Configuration -**/ -typedef struct { - -/** Offset 0x0040 - Platform Reserved Memory Size - The minimum platform memory size required to pass control into DXE -**/ - UINT64 PlatformMemorySize; - -/** Offset 0x0048 - SPD Data Length - Length of SPD Data - 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes -**/ - UINT16 MemorySpdDataLen; - -/** Offset 0x004A - Enable above 4GB MMIO resource support - Enable/disable above 4GB MMIO resource support - $EN_DIS -**/ - UINT8 EnableAbove4GBMmio; - -/** Offset 0x004B - Enable/Disable CrashLog Device 10 - Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog - $EN_DIS -**/ - UINT8 CpuCrashLogDevice; - -/** Offset 0x004C - MemorySpdPtr00 -**/ - UINT32 MemorySpdPtr00; - -/** Offset 0x0050 - MemorySpdPtr01 -**/ - UINT32 MemorySpdPtr01; - -/** Offset 0x0054 - MemorySpdPtr02 -**/ - UINT32 MemorySpdPtr02; - -/** Offset 0x0058 - MemorySpdPtr03 -**/ - UINT32 MemorySpdPtr03; - -/** Offset 0x005C - MemorySpdPtr04 -**/ - UINT32 MemorySpdPtr04; - -/** Offset 0x0060 - MemorySpdPtr05 -**/ - UINT32 MemorySpdPtr05; - -/** Offset 0x0064 - MemorySpdPtr06 -**/ - UINT32 MemorySpdPtr06; - -/** Offset 0x0068 - MemorySpdPtr07 -**/ - UINT32 MemorySpdPtr07; - -/** Offset 0x006C - MemorySpdPtr08 -**/ - UINT32 MemorySpdPtr08; - -/** Offset 0x0070 - MemorySpdPtr09 -**/ - UINT32 MemorySpdPtr09; - -/** Offset 0x0074 - MemorySpdPtr10 -**/ - UINT32 MemorySpdPtr10; - -/** Offset 0x0078 - MemorySpdPtr11 -**/ - UINT32 MemorySpdPtr11; - -/** Offset 0x007C - MemorySpdPtr12 -**/ - UINT32 MemorySpdPtr12; - -/** Offset 0x0080 - MemorySpdPtr13 -**/ - UINT32 MemorySpdPtr13; - -/** Offset 0x0084 - MemorySpdPtr14 -**/ - UINT32 MemorySpdPtr14; - -/** Offset 0x0088 - MemorySpdPtr15 -**/ - UINT32 MemorySpdPtr15; - -/** Offset 0x008C - RcompResistor settings - Indicates RcompResistor settings: Board-dependent -**/ - UINT16 RcompResistor; - -/** Offset 0x008E - RcompTarget settings - RcompTarget settings: board-dependent -**/ - UINT16 RcompTarget[5]; - -/** Offset 0x0098 - DqsMapCpu2DramCh0 -**/ - UINT8 DqsMapCpu2DramCh0[2]; - -/** Offset 0x009A - DqsMapCpu2DramCh1 -**/ - UINT8 DqsMapCpu2DramCh1[2]; - -/** Offset 0x009C - DqsMapCpu2DramCh2 -**/ - UINT8 DqsMapCpu2DramCh2[2]; - -/** Offset 0x009E - DqsMapCpu2DramCh3 -**/ - UINT8 DqsMapCpu2DramCh3[2]; - -/** Offset 0x00A0 - DqsMapCpu2DramCh4 -**/ - UINT8 DqsMapCpu2DramCh4[2]; - -/** Offset 0x00A2 - DqsMapCpu2DramCh5 -**/ - UINT8 DqsMapCpu2DramCh5[2]; - -/** Offset 0x00A4 - DqsMapCpu2DramCh6 -**/ - UINT8 DqsMapCpu2DramCh6[2]; - -/** Offset 0x00A6 - DqsMapCpu2DramCh7 -**/ - UINT8 DqsMapCpu2DramCh7[2]; - -/** Offset 0x00A8 - DqMapCpu2DramCh0 -**/ - UINT8 DqMapCpu2DramCh0[16]; - -/** Offset 0x00B8 - DqMapCpu2DramCh1 -**/ - UINT8 DqMapCpu2DramCh1[16]; - -/** Offset 0x00C8 - DqMapCpu2DramCh2 -**/ - UINT8 DqMapCpu2DramCh2[16]; - -/** Offset 0x00D8 - DqMapCpu2DramCh3 -**/ - UINT8 DqMapCpu2DramCh3[16]; - -/** Offset 0x00E8 - DqMapCpu2DramCh4 -**/ - UINT8 DqMapCpu2DramCh4[16]; - -/** Offset 0x00F8 - DqMapCpu2DramCh5 -**/ - UINT8 DqMapCpu2DramCh5[16]; - -/** Offset 0x0108 - DqMapCpu2DramCh6 -**/ - UINT8 DqMapCpu2DramCh6[16]; - -/** Offset 0x0118 - DqMapCpu2DramCh7 -**/ - UINT8 DqMapCpu2DramCh7[16]; - -/** Offset 0x0128 - Dqs Pins Interleaved Setting - Indicates DqPinsInterleaved setting: board-dependent - $EN_DIS -**/ - UINT8 DqPinsInterleaved; - -/** Offset 0x0129 - Smram Mask - The SMM Regions AB-SEG and/or H-SEG reserved - 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both -**/ - UINT8 SmramMask; - -/** Offset 0x012A - MRC Fast Boot - Enables/Disable the MRC fast path thru the MRC - $EN_DIS -**/ - UINT8 MrcFastBoot; - -/** Offset 0x012B - Rank Margin Tool per Task - This option enables the user to execute Rank Margin Tool per major training step - in the MRC. - $EN_DIS -**/ - UINT8 RmtPerTask; - -/** Offset 0x012C - Training Trace - This option enables the trained state tracing feature in MRC. This feature will - print out the key training parameters state across major training steps. - $EN_DIS -**/ - UINT8 TrainTrace; - -/** Offset 0x012D -**/ - UINT8 UnusedUpdSpace0[3]; - -/** Offset 0x0130 - Intel Enhanced Debug - <b>@deprecated</b> - Not used and has no effect - 0 : Disable, 0x400000 : Enable -**/ - UINT32 IedSize; - -/** Offset 0x0134 - Tseg Size - Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build - 0x0400000:4MB, 0x01000000:16MB -**/ - UINT32 TsegSize; - -/** Offset 0x0138 - MMIO Size - Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB -**/ - UINT16 MmioSize; - -/** Offset 0x013A - Probeless Trace - Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. - This also requires IED to be enabled. - $EN_DIS -**/ - UINT8 ProbelessTrace; - -/** Offset 0x013B - Enable SMBus - Enable/disable SMBus controller. - $EN_DIS -**/ - UINT8 SmbusEnable; - -/** Offset 0x013C - Spd Address Tabl - Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used - if SPD Address is 00 -**/ - UINT8 SpdAddressTable[16]; - -/** Offset 0x014C - Platform Debug Consent - To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. - Enabling this BIOS option may alter the default value of other debug-related BIOS - options.\Manual: Do not use Platform Debug Consent to override other debug-relevant - policies, but the user must set each debug option manually, aimed at advanced users.\n - Note: DCI OOB (aka BSSB) uses CCA probe;[DCI OOB+DbC] and [USB2 DbC] have the same setting. - 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), - 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual -**/ - UINT8 PlatformDebugConsent; - -/** Offset 0x014D - DCI Enable - Determine if to enable DCI debug from host - $EN_DIS -**/ - UINT8 DciEn; - -/** Offset 0x014E - DCI DbC Mode - Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: - Set both USB2/3DBCEN; No Change: Comply with HW value - 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change -**/ - UINT8 DciDbcMode; - -/** Offset 0x014F - Enable DCI ModPHY Power Gate - Enable ModPHY Power Gate when DCI is enabled - $EN_DIS -**/ - UINT8 DciModphyPg; - -/** Offset 0x0150 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support - This BIOS option enables kernel and platform debug for USB3 interface over a UFP - Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. - 0:Disabled, 1:Enabled, 2:No Change -**/ - UINT8 DciUsb3TypecUfpDbg; - -/** Offset 0x0151 - PCH Trace Hub Mode - Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' - if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. - 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode -**/ - UINT8 PchTraceHubMode; - -/** Offset 0x0152 - PCH Trace Hub Memory Region 0 buffer Size - Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 PchTraceHubMemReg0Size; - -/** Offset 0x0153 - PCH Trace Hub Memory Region 1 buffer Size - Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 PchTraceHubMemReg1Size; - -/** Offset 0x0154 - HD Audio DMIC Link Clock Select - Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB - 0: Both, 1: ClkA, 2: ClkB -**/ - UINT8 PchHdaAudioLinkDmicClockSelect[2]; - -/** Offset 0x0156 - PchPreMemRsvd - Reserved for PCH Pre-Mem Reserved - $EN_DIS -**/ - UINT8 PchPreMemRsvd[5]; - -/** Offset 0x015B - State of X2APIC_OPT_OUT bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 X2ApicOptOut; - -/** Offset 0x015C - State of DMA_CONTROL_GUARANTEE bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 DmaControlGuarantee; - -/** Offset 0x015D -**/ - UINT8 UnusedUpdSpace1[3]; - -/** Offset 0x0160 - Base addresses for VT-d function MMIO access - Base addresses for VT-d MMIO access per VT-d engine -**/ - UINT32 VtdBaseAddress[9]; - -/** Offset 0x0184 - Disable VT-d - 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) - $EN_DIS -**/ - UINT8 VtdDisable; - -/** Offset 0x0185 - Vtd Programming for Igd - 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar - programming disabled) - $EN_DIS -**/ - UINT8 VtdIgdEnable; - -/** Offset 0x0186 - Vtd Programming for Ipu - 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar - programming disabled) - $EN_DIS -**/ - UINT8 VtdIpuEnable; - -/** Offset 0x0187 - Vtd Programming for Iop - 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar - programming disabled) - $EN_DIS -**/ - UINT8 VtdIopEnable; - -/** Offset 0x0188 - Vtd Programming for ITbt - 1=Enable/TRUE (ITbt VT-d Bar programming enabled), 0=Disable/FLASE (ITbt VT-d Bar - programming disabled) - $EN_DIS -**/ - UINT8 VtdItbtEnable; - -/** Offset 0x0189 - Internal Graphics Pre-allocated Memory - Size of memory preallocated for internal graphics. - 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, - 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, - 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB -**/ - UINT8 IgdDvmt50PreAlloc; - -/** Offset 0x018A - Internal Graphics - Enable/disable internal graphics. - $EN_DIS -**/ - UINT8 InternalGfx; - -/** Offset 0x018B - Aperture Size - Select the Aperture Size. - 0:128 MB, 1:256 MB, 3:512 MB, 7:1024 MB, 15: 2048 MB -**/ - UINT8 ApertureSize; - -/** Offset 0x018C - Board Type - MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile - Halo, 7=UP Server - 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server -**/ - UINT8 UserBd; - -/** Offset 0x018D -**/ - UINT8 UnusedUpdSpace2; - -/** Offset 0x018E - DDR Frequency Limit - Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, - 2133, 2400, 2667, 2933 and 0 for Auto. - 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto -**/ - UINT16 DdrFreqLimit; - -/** Offset 0x0190 - SA GV - System Agent dynamic frequency support and when enabled memory will be training - at three different frequencies. - 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, 4:FixedPoint3, 5:Enabled -**/ - UINT8 SaGv; - -/** Offset 0x0191 - Memory Test on Warm Boot - Run Base Memory Test on Warm Boot - 0:Disable, 1:Enable -**/ - UINT8 MemTestOnWarmBoot; - -/** Offset 0x0192 - DDR Speed Control - DDR Frequency and Gear control for all SAGV points. - 0:Auto, 1:Manual -**/ - UINT8 DdrSpeedControl; - -/** Offset 0x0193 - Rank Margin Tool - Enable/disable Rank Margin Tool. - $EN_DIS -**/ - UINT8 RMT; - -/** Offset 0x0194 - DisableDimmCh0 -**/ - UINT8 DisableDimmCh0; - -/** Offset 0x0195 - DisableDimmCh1 -**/ - UINT8 DisableDimmCh1; - -/** Offset 0x0196 - DisableDimmCh2 -**/ - UINT8 DisableDimmCh2; - -/** Offset 0x0197 - DisableDimmCh3 -**/ - UINT8 DisableDimmCh3; - -/** Offset 0x0198 - DisableDimmCh4 -**/ - UINT8 DisableDimmCh4; - -/** Offset 0x0199 - DisableDimmCh5 -**/ - UINT8 DisableDimmCh5; - -/** Offset 0x019A - DisableDimmCh6 -**/ - UINT8 DisableDimmCh6; - -/** Offset 0x019B - DisableDimmCh7 -**/ - UINT8 DisableDimmCh7; - -/** Offset 0x019C - Scrambler Support - This option enables data scrambling in memory. - $EN_DIS -**/ - UINT8 ScramblerSupport; - -/** Offset 0x019D - SPD Profile Selected - Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP - Profile 1, 3=XMP Profile 2 - 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2 -**/ - UINT8 SpdProfileSelected; - -/** Offset 0x019E - Memory Reference Clock - 100MHz, 133MHz. - 0:133MHz, 1:100MHz -**/ - UINT8 RefClk; - -/** Offset 0x019F -**/ - UINT8 UnusedUpdSpace3; - -/** Offset 0x01A0 - Memory Voltage - DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM - chips) in millivolts. <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc. - 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 - Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts -**/ - UINT16 VddVoltage; - -/** Offset 0x01A2 - Memory Ratio - Automatic or the frequency will equal ratio times reference clock. Set to Auto to - recalculate memory timings listed below. - 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 -**/ - UINT8 Ratio; - -/** Offset 0x01A3 - tCL - CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT8 tCL; - -/** Offset 0x01A4 - tCWL - Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT8 tCWL; - -/** Offset 0x01A5 -**/ - UINT8 UnusedUpdSpace4; - -/** Offset 0x01A6 - tFAW - Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT16 tFAW; - -/** Offset 0x01A8 - tRAS - RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT16 tRAS; - -/** Offset 0x01AA - tRCD/tRP - RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used - if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). -**/ - UINT8 tRCDtRP; - -/** Offset 0x01AB -**/ - UINT8 UnusedUpdSpace5; - -/** Offset 0x01AC - tREFI - Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT16 tREFI; - -/** Offset 0x01AE - tRFC - Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT16 tRFC; - -/** Offset 0x01B0 - tRRD - Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT8 tRRD; - -/** Offset 0x01B1 - tRTP - Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal - values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT8 tRTP; - -/** Offset 0x01B2 - tWR - Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, - 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). - 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, - 34:34, 40:40 -**/ - UINT8 tWR; - -/** Offset 0x01B3 - tWTR - Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected - == 1 (Custom Profile). -**/ - UINT8 tWTR; - -/** Offset 0x01B4 - NMode - System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N -**/ - UINT8 NModeSupport; - -/** Offset 0x01B5 - Enable Intel HD Audio (Azalia) - 0: Disable, 1: Enable (Default) Azalia controller - $EN_DIS -**/ - UINT8 PchHdaEnable; - -/** Offset 0x01B6 - Enable PCH ISH Controller - 0: Disable, 1: Enable (Default) ISH Controller - $EN_DIS -**/ - UINT8 PchIshEnable; - -/** Offset 0x01B7 - CPU Trace Hub Mode - Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' - if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. - 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode -**/ - UINT8 CpuTraceHubMode; - -/** Offset 0x01B8 - CPU Trace Hub Memory Region 0 - CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 CpuTraceHubMemReg0Size; - -/** Offset 0x01B9 - CPU Trace Hub Memory Region 1 - CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, - 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. - 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB -**/ - UINT8 CpuTraceHubMemReg1Size; - -/** Offset 0x01BA - SAGV Gear Ratio - Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2 -**/ - UINT8 SaGvGear[4]; - -/** Offset 0x01BE - SAGV Frequency - SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300. -**/ - UINT16 SaGvFreq[4]; - -/** Offset 0x01C6 - SAGV Disabled Gear Ratio - Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2 -**/ - UINT8 GearRatio; - -/** Offset 0x01C7 - HECI Timeouts - 0: Disable, 1: Enable (Default) timeout check for HECI - $EN_DIS -**/ - UINT8 HeciTimeouts; - -/** Offset 0x01C8 - HECI1 BAR address - BAR address of HECI1 -**/ - UINT32 Heci1BarAddress; - -/** Offset 0x01CC - HECI2 BAR address - BAR address of HECI2 -**/ - UINT32 Heci2BarAddress; - -/** Offset 0x01D0 - HECI3 BAR address - BAR address of HECI3 -**/ - UINT32 Heci3BarAddress; - -/** Offset 0x01D4 - HG dGPU Power Delay - HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is - 300=300 microseconds -**/ - UINT16 HgDelayAfterPwrEn; - -/** Offset 0x01D6 - HG dGPU Reset Delay - HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 - microseconds -**/ - UINT16 HgDelayAfterHoldReset; - -/** Offset 0x01D8 - MMIO size adjustment for AUTO mode - Positive number means increasing MMIO size, Negative value means decreasing MMIO - size: 0 (Default)=no change to AUTO mode MMIO size -**/ - UINT16 MmioSizeAdjustment; - -/** Offset 0x01DA - PCIe ASPM programming will happen in relation to the Oprom - Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): - Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after - Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume - 0:Before, 1:After -**/ - UINT8 InitPcieAspmAfterOprom; - -/** Offset 0x01DB - Selection of the primary display device - 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics - 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics -**/ - UINT8 PrimaryDisplay; - -/** Offset 0x01DC - Selection of PSMI Region size - 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 - 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB -**/ - UINT8 PsmiRegionSize; - -/** Offset 0x01DD -**/ - UINT8 UnusedUpdSpace6[3]; - -/** Offset 0x01E0 - Temporary MMIO address for GMADR - Obsolete field now and it has been extended to 64 bit address, used GmAdr64 -**/ - UINT32 GmAdr; - -/** Offset 0x01E4 - Temporary MMIO address for GTTMMADR - The reference code will use this as Temporary MMIO address space to access GTTMMADR - Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr - to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO - + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) -**/ - UINT32 GttMmAdr; - -/** Offset 0x01E8 - Selection of iGFX GTT Memory size - 1=2MB, 2=4MB, 3=8MB, Default is 3 - 1:2MB, 2:4MB, 3:8MB -**/ - UINT16 GttSize; - -/** Offset 0x01EA -**/ - UINT8 UnusedUpdSpace7[2]; - -/** Offset 0x01EC - Hybrid Graphics GPIO information for PEG 0 - Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs -**/ - UINT32 CpuPcie0Rtd3Gpio[24]; - -/** Offset 0x024C - Enable/Disable MRC TXT dependency - When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): - MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization - $EN_DIS -**/ - UINT8 TxtImplemented; - -/** Offset 0x024D - Enable/Disable SA OcSupport - Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport - $EN_DIS -**/ - UINT8 SaOcSupport; - -/** Offset 0x024E - GT slice Voltage Mode - 0(Default): Adaptive, 1: Override - 0: Adaptive, 1: Override -**/ - UINT8 GtVoltageMode; - -/** Offset 0x024F - Maximum GTs turbo ratio override - 0(Default)=Minimal/Auto, 60=Maximum -**/ - UINT8 GtMaxOcRatio; - -/** Offset 0x0250 - The voltage offset applied to GT slice - 0(Default)=Minimal, 1000=Maximum -**/ - UINT16 GtVoltageOffset; - -/** Offset 0x0252 - The GT slice voltage override which is applied to the entire range of GT frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtVoltageOverride; - -/** Offset 0x0254 - adaptive voltage applied during turbo frequencies - 0(Default)=Minimal, 2000=Maximum -**/ - UINT16 GtExtraTurboVoltage; - -/** Offset 0x0256 - voltage offset applied to the SA - 0(Default)=Minimal, 1000=Maximum -**/ - UINT16 SaVoltageOffset; - -/** Offset 0x0258 - PCIe root port Function number for Hybrid Graphics dGPU - Root port Index number to indicate which PCIe root port has dGPU -**/ - UINT8 RootPortIndex; - -/** Offset 0x0259 - Realtime Memory Timing - 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform - realtime memory timing changes after MRC_DONE. - 0: Disabled, 1: Enabled -**/ - UINT8 RealtimeMemoryTiming; - -/** Offset 0x025A - iTBT PCIe Multiple Segment setting - When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the - TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 PcieMultipleSegmentEnabled; - -/** Offset 0x025B - Enable/Disable SA IPU - Enable(Default): Enable SA IPU, Disable: Disable SA IPU - $EN_DIS -**/ - UINT8 SaIpuEnable; - -/** Offset 0x025C - IPU IMR Configuration - 0:IPU Camera, 1:IPU Gen Default is 0 - 0:IPU Camera, 1:IPU Gen -**/ - UINT8 SaIpuImrConfiguration; - -/** Offset 0x025D - IMGU CLKOUT Configuration - The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>. - $EN_DIS -**/ - UINT8 ImguClkOutEn[6]; - -/** Offset 0x0263 -**/ - UINT8 UnusedUpdSpace8; - -/** Offset 0x0264 - Enable PCIE RP Mask - Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 - for port1, bit1 for port2, and so on. -**/ - UINT32 CpuPcieRpEnableMask; - -/** Offset 0x0268 - Assertion on Link Down GPIOs - GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down - GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs - 0:Disable, 1:Enable -**/ - UINT8 CpuPcieRpLinkDownGpios; - -/** Offset 0x0269 - RpClockReqMsgEnable -**/ - UINT8 RpClockReqMsgEnable; - -/** Offset 0x026A - RpPcieThresholdBytes -**/ - UINT8 RpPcieThresholdBytes[4]; - -/** Offset 0x026E - Selection of PSMI Support On/Off - 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support - $EN_DIS -**/ - UINT8 GtPsmiSupport; - -/** Offset 0x026F - Selection of DiSM Region Size - DiSM Size to be allocated for 2LM Sku Default is 0 - 0:0GB, 1:1GB, 2:2GB, 3:3GB, 4:4GB, 5:5GB, 6:6GB, 7:7GB -**/ - UINT8 DismSize; - -/** Offset 0x0270 - Enable Display memory map programming for DFD Restore - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DfdRestoreEnable; - -/** Offset 0x0271 - Program GPIOs for LFP on DDI port-A device - 0=Disabled,1(Default)=eDP, 2=MIPI DSI - 0:Disabled, 1:eDP, 2:MIPI DSI -**/ - UINT8 DdiPortAConfig; - -/** Offset 0x0272 - Program GPIOs for LFP on DDI port-B device - 0(Default)=Disabled,1=eDP, 2=MIPI DSI - 0:Disabled, 1:eDP, 2:MIPI DSI -**/ - UINT8 DdiPortBConfig; - -/** Offset 0x0273 - Enable or disable HPD of DDI port A - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPortAHpd; - -/** Offset 0x0274 - Enable or disable HPD of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortBHpd; - -/** Offset 0x0275 - Enable or disable HPD of DDI port C - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPortCHpd; - -/** Offset 0x0276 - Enable or disable HPD of DDI port 1 - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPort1Hpd; - -/** Offset 0x0277 - Enable or disable HPD of DDI port 2 - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPort2Hpd; - -/** Offset 0x0278 - Enable or disable HPD of DDI port 3 - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPort3Hpd; - -/** Offset 0x0279 - Enable or disable HPD of DDI port 4 - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPort4Hpd; - -/** Offset 0x027A - Enable or disable DDC of DDI port A - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPortADdc; - -/** Offset 0x027B - Enable or disable DDC of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortBDdc; - -/** Offset 0x027C - Enable or disable DDC of DDI port C - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPortCDdc; - -/** Offset 0x027D - Enable DDC setting of DDI Port 1 - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPort1Ddc; - -/** Offset 0x027E - Enable DDC setting of DDI Port 2 - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPort2Ddc; - -/** Offset 0x027F - Enable DDC setting of DDI Port 3 - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPort3Ddc; - -/** Offset 0x0280 - Enable DDC setting of DDI Port 4 - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPort4Ddc; - -/** Offset 0x0281 - Enable Gt CLOS - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 GtClosEnable; - -/** Offset 0x0282 -**/ - UINT8 UnusedUpdSpace9[6]; - -/** Offset 0x0288 - Temporary MMIO address for GMADR - The reference code will use this as Temporary MMIO address space to access GMADR - Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to - (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress - - 0x1) (Where ApertureSize = 256MB, 512MB, 1024MB and 2048MB) -**/ - UINT64 GmAdr64; - -/** Offset 0x0290 - Hybrid Graphics Slot Selection - PEG or PCH Slot Selection for Hybrid Graphics -**/ - UINT8 HgSlot; - -/** Offset 0x0291 - DMI ASPM Configuration:{Combo - Set ASPM Configuration - 0:Disabled, 1:L0s, 2:L1, 3:L1L0s -**/ - UINT8 DmiAspm; - -/** Offset 0x0292 - DMI ASPM Control Configuration:{Combo - Set ASPM Control configuration - 0:Disabled, 1:L0s, 2:L1, 3:L1L0s -**/ - UINT8 DmiAspmCtrl; - -/** Offset 0x0293 - DMI ASPM L1 exit Latency - Range: 0-7, 4 is default L1 exit Latency -**/ - UINT8 DmiAspmL1ExitLatency; - -/** Offset 0x0294 - Per-core HT Disable - Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, - 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value - of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have - HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1. -**/ - UINT16 PerCoreHtDisable; - -/** Offset 0x0296 - DEKEL CDR Relock - Enable/Disable CDR Relock. 0: Disable(Default); 1: Enable -**/ - UINT8 CpuPcieRpCdrRelock[4]; - -/** Offset 0x029A - Realtime Memory OverClock - Disable/Enables Realtime Memory OverClock - $EN_DIS -**/ - UINT8 RealtimeMemoryOC; - -/** Offset 0x029B - Xl1el - Enable/Disable NewFom for DEKEL Programming. 0: Disable(Default); 1: Enable -**/ - UINT8 CpuPcieNewFom[4]; - -/** Offset 0x029F - Xl1el - Enable/Disable NewFomDisable. 0: Disable(Default); 1: Enable -**/ - UINT8 CpuPcieIotgMode[4]; - -/** Offset 0x02A3 - SaPreMemProductionRsvd - Reserved for SA Pre-Mem Production - $EN_DIS -**/ - UINT8 SaPreMemProductionRsvd[87]; - -/** Offset 0x02FA - DMI Max Link Speed - Auto (0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2): - Limit Link to Gen2 Speed, (Default) Gen3(0x3):Limit Link to Gen3 Speed - 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 -**/ - UINT8 DmiMaxLinkSpeed; - -/** Offset 0x02FB - DMI Equalization Phase 2 - DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): - AUTO - Use the current default method - 0:Disable phase2, 1:Enable phase2, 2:Auto -**/ - UINT8 DmiGen3EqPh2Enable; - -/** Offset 0x02FC - DMI Gen3 Equalization Phase3 - DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, - HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software - Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static - EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just - Phase1), Disabled(0x4): Bypass Equalization Phase 3 - 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 -**/ - UINT8 DmiGen3EqPh3Method; - -/** Offset 0x02FD - Enable/Disable DMI GEN3 Static EQ Phase1 programming - Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static - Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 DmiGen3ProgramStaticEq; - -/** Offset 0x02FE - DeEmphasis control for DMI - DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB - 0: -6dB, 1: -3.5dB -**/ - UINT8 DmiDeEmphasis; - -/** Offset 0x02FF - DMI Gen3 Root port preset values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane -**/ - UINT8 DmiGen3RootPortPreset[8]; - -/** Offset 0x0307 - DMI Gen3 End port preset values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane -**/ - UINT8 DmiGen3EndPointPreset[8]; - -/** Offset 0x030F - DMI Gen3 End port Hint values per lane - Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 DmiGen3EndPointHint[8]; - -/** Offset 0x0317 - DMI Gen3 RxCTLEp per-Bundle control - Range: 0-15, 0 is default for each bundle, must be specified based upon platform design -**/ - UINT8 DmiGen3RxCtlePeaking[4]; - -/** Offset 0x031B - BIST on Reset - Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 BistOnReset; - -/** Offset 0x031C - Skip Stop PBET Timer Enable/Disable - Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 SkipStopPbet; - -/** Offset 0x031D - C6DRAM power gating feature - This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM - power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating - feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. - $EN_DIS -**/ - UINT8 EnableC6Dram; - -/** Offset 0x031E - Over clocking support - Over clocking support; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 OcSupport; - -/** Offset 0x031F - Over clocking Lock - Over clocking Lock Enable/Disable; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 OcLock; - -/** Offset 0x0320 - Maximum Core Turbo Ratio Override - Maximum core turbo ratio override allows to increase CPU core frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 -**/ - UINT8 CoreMaxOcRatio; - -/** Offset 0x0321 - Core voltage mode - Core voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 CoreVoltageMode; - -/** Offset 0x0322 - Maximum clr turbo ratio override - Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 -**/ - UINT8 RingMaxOcRatio; - -/** Offset 0x0323 - Hyper Threading Enable/Disable - Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 HyperThreading; - -/** Offset 0x0324 - Enable or Disable CPU Ratio Override - Enable or Disable CPU Ratio Override; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 CpuRatioOverride; - -/** Offset 0x0325 - CPU ratio value - CPU ratio value. Valid Range 0 to 63 -**/ - UINT8 CpuRatio; - -/** Offset 0x0326 - Boot frequency - Sets the boot frequency starting from reset vector.- 0: Maximum battery performance. - 1: Maximum non-turbo performance. <b>2: Turbo performance </b> - 0:0, 1:1, 2:2 -**/ - UINT8 BootFrequency; - -/** Offset 0x0327 - Number of active cores - Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2: - 2 </b>;<b>3: 3 </b> - 0:All, 1:1, 2:2, 3:3 -**/ - UINT8 ActiveCoreCount; - -/** Offset 0x0328 - Processor Early Power On Configuration FCLK setting - <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- - 2: 400 MHz. - 3: Reserved - 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved -**/ - UINT8 FClkFrequency; - -/** Offset 0x0329 - Set JTAG power in C10 and deeper power states - False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 - and deeper power states for debug purpose. <b>0: False</b>; 1: True. - 0: False, 1: True -**/ - UINT8 JtagC10PowerGateDisable; - -/** Offset 0x032A - Enable or Disable VMX - Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 VmxEnable; - -/** Offset 0x032B - AVX2 Ratio Offset - 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio - vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. -**/ - UINT8 Avx2RatioOffset; - -/** Offset 0x032C - AVX3 Ratio Offset - 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio - vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. -**/ - UINT8 Avx3RatioOffset; - -/** Offset 0x032D - BCLK Adaptive Voltage Enable - When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: - Disable;<b> 1: Enable - $EN_DIS -**/ - UINT8 BclkAdaptiveVoltage; - -/** Offset 0x032E - core voltage override - The core voltage override which is applied to the entire range of cpu core frequencies. - Valid Range 0 to 2000 -**/ - UINT16 CoreVoltageOverride; - -/** Offset 0x0330 - Core Turbo voltage Adaptive - Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. - Valid Range 0 to 2000 -**/ - UINT16 CoreVoltageAdaptive; - -/** Offset 0x0332 - Core Turbo voltage Offset - The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 -**/ - UINT16 CoreVoltageOffset; - -/** Offset 0x0334 - Core PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 CorePllVoltageOffset; - -/** Offset 0x0335 - Ring Downbin - Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always - lower than the core ratio.0: Disable; <b>1: Enable.</b> - $EN_DIS -**/ - UINT8 RingDownBin; - -/** Offset 0x0336 - Ring voltage mode - Ring voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 RingVoltageMode; - -/** Offset 0x0337 - TjMax Offset - TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support - TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 -**/ - UINT8 TjMaxOffset; - -/** Offset 0x0338 - Ring voltage override - The ring voltage override which is applied to the entire range of cpu ring frequencies. - Valid Range 0 to 2000 -**/ - UINT16 RingVoltageOverride; - -/** Offset 0x033A - Ring Turbo voltage Adaptive - Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. - Valid Range 0 to 2000 -**/ - UINT16 RingVoltageAdaptive; - -/** Offset 0x033C - Ring Turbo voltage Offset - The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 -**/ - UINT16 RingVoltageOffset; - -/** Offset 0x033E - Enable or Disable TME - Enable or Disable TME; <b>0: Disable<b>; 1: Enable. - $EN_DIS -**/ - UINT8 TmeEnable; - -/** Offset 0x033F - Enable CPU CrashLog - Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 CpuCrashLogEnable; - -/** Offset 0x0340 - ElixirSpringsPatchAddr - DEPRECATED -**/ - UINT32 ElixirSpringsPatchAddr; - -/** Offset 0x0344 - ElixirSpringsPatchSize - DEPRECATED -**/ - UINT32 ElixirSpringsPatchSize; - -/** Offset 0x0348 - CPU Run Control - Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: - No Change</b> - 0:Disabled, 1:Enabled, 2:No Change -**/ - UINT8 DebugInterfaceEnable; - -/** Offset 0x0349 - CPU Run Control Lock - Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 DebugInterfaceLockEnable; - -/** Offset 0x034A - BiosGuard - Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable - $EN_DIS -**/ - UINT8 BiosGuard; - -/** Offset 0x034B -**/ - UINT8 BiosGuardToolsInterface; - -/** Offset 0x034C - EnableSgx - Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control - 0: Disable, 1: Enable, 2: Software Control -**/ - UINT8 EnableSgx; - -/** Offset 0x034D - Txt - Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable - $EN_DIS -**/ - UINT8 Txt; - -/** Offset 0x034E -**/ - UINT8 UnusedUpdSpace10[2]; - -/** Offset 0x0350 - PrmrrSize - Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable -**/ - UINT32 PrmrrSize; - -/** Offset 0x0354 - SinitMemorySize - Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable -**/ - UINT32 SinitMemorySize; - -/** Offset 0x0358 - TxtDprMemoryBase - Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable -**/ - UINT64 TxtDprMemoryBase; - -/** Offset 0x0360 - TxtHeapMemorySize - Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable -**/ - UINT32 TxtHeapMemorySize; - -/** Offset 0x0364 - TxtDprMemorySize - Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable -**/ - UINT32 TxtDprMemorySize; - -/** Offset 0x0368 - BiosAcmBase - Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable -**/ - UINT32 BiosAcmBase; - -/** Offset 0x036C - BiosAcmSize - Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable -**/ - UINT32 BiosAcmSize; - -/** Offset 0x0370 - ApStartupBase - Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable -**/ - UINT32 ApStartupBase; - -/** Offset 0x0374 - TgaSize - Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable -**/ - UINT32 TgaSize; - -/** Offset 0x0378 - TxtLcpPdBase - Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable -**/ - UINT64 TxtLcpPdBase; - -/** Offset 0x0380 - TxtLcpPdSize - Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable -**/ - UINT64 TxtLcpPdSize; - -/** Offset 0x0388 - IsTPMPresence - IsTPMPresence default values -**/ - UINT8 IsTPMPresence; - -/** Offset 0x0389 - Configuration for boot TDP selection - Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP - Up;0xFF : Deactivate -**/ - UINT8 ConfigTdpLevel; - -/** Offset 0x038A - ReservedSecurityPreMem - Reserved for Security Pre-Mem - $EN_DIS -**/ - UINT8 ReservedSecurityPreMem[5]; - -/** Offset 0x038F - Enable PCH HSIO PCIE Rx Set Ctle - Enable PCH PCIe Gen 3 Set CTLE Value. -**/ - UINT8 PchPcieHsioRxSetCtleEnable[24]; - -/** Offset 0x03A7 - PCH HSIO PCIE Rx Set Ctle Value - PCH PCIe Gen 3 Set CTLE Value. -**/ - UINT8 PchPcieHsioRxSetCtle[24]; - -/** Offset 0x03BF - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; - -/** Offset 0x03D7 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; - -/** Offset 0x03EF - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; - -/** Offset 0x0407 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; - -/** Offset 0x041F - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; - -/** Offset 0x0437 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value - PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; - -/** Offset 0x044F - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; - -/** Offset 0x0467 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value - PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen1DeEmph[24]; - -/** Offset 0x047F - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; - -/** Offset 0x0497 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value - PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; - -/** Offset 0x04AF - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; - -/** Offset 0x04C7 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value - PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. -**/ - UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; - -/** Offset 0x04DF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; - -/** Offset 0x04E7 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen1EqBoostMag[8]; - -/** Offset 0x04EF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; - -/** Offset 0x04F7 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen2EqBoostMag[8]; - -/** Offset 0x04FF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; - -/** Offset 0x0507 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. -**/ - UINT8 PchSataHsioRxGen3EqBoostMag[8]; - -/** Offset 0x050F - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; - -/** Offset 0x0517 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen1DownscaleAmp[8]; - -/** Offset 0x051F - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; - -/** Offset 0x0527 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen2DownscaleAmp[8]; - -/** Offset 0x052F - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; - -/** Offset 0x0537 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. -**/ - UINT8 PchSataHsioTxGen3DownscaleAmp[8]; - -/** Offset 0x053F - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen1DeEmphEnable[8]; - -/** Offset 0x0547 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen1DeEmph[8]; - -/** Offset 0x054F - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen2DeEmphEnable[8]; - -/** Offset 0x0557 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen2DeEmph[8]; - -/** Offset 0x055F - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override - 0: Disable; 1: Enable. -**/ - UINT8 PchSataHsioTxGen3DeEmphEnable[8]; - -/** Offset 0x0567 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. -**/ - UINT8 PchSataHsioTxGen3DeEmph[8]; - -/** Offset 0x056F - PCH LPC Enhanced Port 80 Decoding - Original LPC only decodes one byte of port 80h. - $EN_DIS -**/ - UINT8 PchLpcEnhancePort8xhDecoding; - -/** Offset 0x0570 - PCH Port80 Route - Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. - 0:LPC, 1:PCI -**/ - UINT8 PchPort80Route; - -/** Offset 0x0571 - Enable SMBus ARP support - Enable SMBus ARP support. - $EN_DIS -**/ - UINT8 SmbusArpEnable; - -/** Offset 0x0572 - Number of RsvdSmbusAddressTable. - The number of elements in the RsvdSmbusAddressTable. -**/ - UINT8 PchNumRsvdSmbusAddresses; - -/** Offset 0x0573 -**/ - UINT8 UnusedUpdSpace11; - -/** Offset 0x0574 - SMBUS Base Address - SMBUS Base Address (IO space). -**/ - UINT16 PchSmbusIoBase; - -/** Offset 0x0576 - Enable SMBus Alert Pin - Enable SMBus Alert Pin. - $EN_DIS -**/ - UINT8 PchSmbAlertEnable; - -/** Offset 0x0577 - Usage type for ClkSrc - 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use - (free running), 0xFF: not used -**/ - UINT8 PcieClkSrcUsage[16]; - -/** Offset 0x0587 - ClkReq-to-ClkSrc mapping - Number of ClkReq signal assigned to ClkSrc -**/ - UINT8 PcieClkSrcClkReq[16]; - -/** Offset 0x0597 -**/ - UINT8 UnusedUpdSpace12; - -/** Offset 0x0598 - Point of RsvdSmbusAddressTable - Array of addresses reserved for non-ARP-capable SMBus devices. -**/ - UINT32 RsvdSmbusAddressTablePtr; - -/** Offset 0x059C - Enable PCIE RP Mask - Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 - for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpEnableMask; - -/** Offset 0x05A0 - Debug Interfaces - Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, - BIT2 - Not used. -**/ - UINT8 PcdDebugInterfaceFlags; - -/** Offset 0x05A1 - Serial Io Uart Debug Controller Number - Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT - Core interface, it cannot be used for debug purpose. - 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 -**/ - UINT8 SerialIoUartDebugControllerNumber; - -/** Offset 0x05A2 - Serial Io Uart Debug Auto Flow - Enables UART hardware flow control, CTS and RTS lines. - $EN_DIS -**/ - UINT8 SerialIoUartDebugAutoFlow; - -/** Offset 0x05A3 -**/ - UINT8 UnusedUpdSpace13; - -/** Offset 0x05A4 - Serial Io Uart Debug BaudRate - Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, - 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 -**/ - UINT32 SerialIoUartDebugBaudRate; - -/** Offset 0x05A8 - Serial Io Uart Debug Parity - Set default Parity. - 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity -**/ - UINT8 SerialIoUartDebugParity; - -/** Offset 0x05A9 - Serial Io Uart Debug Stop Bits - Set default stop bits. - 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits -**/ - UINT8 SerialIoUartDebugStopBits; - -/** Offset 0x05AA - Serial Io Uart Debug Data Bits - Set default word length. 0: Default, 5,6,7,8 - 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS -**/ - UINT8 SerialIoUartDebugDataBits; - -/** Offset 0x05AB -**/ - UINT8 UnusedUpdSpace14; - -/** Offset 0x05AC - Serial Io Uart Debug Mmio Base - Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode - = SerialIoUartPci. -**/ - UINT32 SerialIoUartDebugMmioBase; - -/** Offset 0x05B0 - ISA Serial Base selection - Select ISA Serial Base address. Default is 0x3F8. - 0:0x3F8, 1:0x2F8 -**/ - UINT8 PcdIsaSerialUartBase; - -/** Offset 0x05B1 - GT PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 GtPllVoltageOffset; - -/** Offset 0x05B2 - Ring PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 RingPllVoltageOffset; - -/** Offset 0x05B3 - System Agent PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 SaPllVoltageOffset; - -/** Offset 0x05B4 - Memory Controller PLL voltage offset - Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 -**/ - UINT8 McPllVoltageOffset; - -/** Offset 0x05B5 - MRC Safe Config - Enables/Disable MRC Safe Config - $EN_DIS -**/ - UINT8 MrcSafeConfig; - -/** Offset 0x05B6 - TCSS Thunderbolt PCIE Root Port 0 Enable - Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssItbtPcie0En; - -/** Offset 0x05B7 - TCSS Thunderbolt PCIE Root Port 1 Enable - Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssItbtPcie1En; - -/** Offset 0x05B8 - TCSS Thunderbolt PCIE Root Port 2 Enable - Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssItbtPcie2En; - -/** Offset 0x05B9 - TCSS Thunderbolt PCIE Root Port 3 Enable - Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssItbtPcie3En; - -/** Offset 0x05BA - TCSS USB HOST (xHCI) Enable - Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below - $EN_DIS -**/ - UINT8 TcssXhciEn; - -/** Offset 0x05BB - TCSS USB DEVICE (xDCI) Enable - Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled - $EN_DIS -**/ - UINT8 TcssXdciEn; - -/** Offset 0x05BC - TCSS DMA0 Enable - Set TCSS DMA0. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssDma0En; - -/** Offset 0x05BD - TCSS DMA1 Enable - Set TCSS DMA1. 0:Disabled 1:Enabled - $EN_DIS -**/ - UINT8 TcssDma1En; - -/** Offset 0x05BE - PcdSerialDebugBaudRate - Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. - 3:9600, 4:19200, 6:56700, 7:115200 -**/ - UINT8 PcdSerialDebugBaudRate; - -/** Offset 0x05BF - HobBufferSize - Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB - total HOB size). - 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value -**/ - UINT8 HobBufferSize; - -/** Offset 0x05C0 - Early Command Training - Enables/Disable Early Command Training - $EN_DIS -**/ - UINT8 ECT; - -/** Offset 0x05C1 - SenseAmp Offset Training - Enables/Disable SenseAmp Offset Training - $EN_DIS -**/ - UINT8 SOT; - -/** Offset 0x05C2 - Early ReadMPR Timing Centering 2D - Enables/Disable Early ReadMPR Timing Centering 2D - $EN_DIS -**/ - UINT8 ERDMPRTC2D; - -/** Offset 0x05C3 - Read MPR Training - Enables/Disable Read MPR Training - $EN_DIS -**/ - UINT8 RDMPRT; - -/** Offset 0x05C4 - Receive Enable Training - Enables/Disable Receive Enable Training - $EN_DIS -**/ - UINT8 RCVET; - -/** Offset 0x05C5 - Jedec Write Leveling - Enables/Disable Jedec Write Leveling - $EN_DIS -**/ - UINT8 JWRL; - -/** Offset 0x05C6 - Early Write Time Centering 2D - Enables/Disable Early Write Time Centering 2D - $EN_DIS -**/ - UINT8 EWRTC2D; - -/** Offset 0x05C7 - Early Read Time Centering 2D - Enables/Disable Early Read Time Centering 2D - $EN_DIS -**/ - UINT8 ERDTC2D; - -/** Offset 0x05C8 - Write Timing Centering 1D - Enables/Disable Write Timing Centering 1D - $EN_DIS -**/ - UINT8 WRTC1D; - -/** Offset 0x05C9 - Write Voltage Centering 1D - Enables/Disable Write Voltage Centering 1D - $EN_DIS -**/ - UINT8 WRVC1D; - -/** Offset 0x05CA - Read Timing Centering 1D - Enables/Disable Read Timing Centering 1D - $EN_DIS -**/ - UINT8 RDTC1D; - -/** Offset 0x05CB - Dimm ODT Training - Enables/Disable Dimm ODT Training - $EN_DIS -**/ - UINT8 DIMMODTT; - -/** Offset 0x05CC - DIMM RON Training - Enables/Disable DIMM RON Training - $EN_DIS -**/ - UINT8 DIMMRONT; - -/** Offset 0x05CD - Write Drive Strength/Equalization 2D - Enables/Disable Write Drive Strength/Equalization 2D - $EN_DIS -**/ - UINT8 WRDSEQT; - -/** Offset 0x05CE - Write Slew Rate Training - Enables/Disable Write Slew Rate Training - $EN_DIS -**/ - UINT8 WRSRT; - -/** Offset 0x05CF - Read ODT Training - Enables/Disable Read ODT Training - $EN_DIS -**/ - UINT8 RDODTT; - -/** Offset 0x05D0 - Read Equalization Training - Enables/Disable Read Equalization Training - $EN_DIS -**/ - UINT8 RDEQT; - -/** Offset 0x05D1 - Read Amplifier Training - Enables/Disable Read Amplifier Training - $EN_DIS -**/ - UINT8 RDAPT; - -/** Offset 0x05D2 - Write Timing Centering 2D - Enables/Disable Write Timing Centering 2D - $EN_DIS -**/ - UINT8 WRTC2D; - -/** Offset 0x05D3 - Read Timing Centering 2D - Enables/Disable Read Timing Centering 2D - $EN_DIS -**/ - UINT8 RDTC2D; - -/** Offset 0x05D4 - Write Voltage Centering 2D - Enables/Disable Write Voltage Centering 2D - $EN_DIS -**/ - UINT8 WRVC2D; - -/** Offset 0x05D5 - Read Voltage Centering 2D - Enables/Disable Read Voltage Centering 2D - $EN_DIS -**/ - UINT8 RDVC2D; - -/** Offset 0x05D6 - Command Voltage Centering - Enables/Disable Command Voltage Centering - $EN_DIS -**/ - UINT8 CMDVC; - -/** Offset 0x05D7 - Late Command Training - Enables/Disable Late Command Training - $EN_DIS -**/ - UINT8 LCT; - -/** Offset 0x05D8 - Round Trip Latency Training - Enables/Disable Round Trip Latency Training - $EN_DIS -**/ - UINT8 RTL; - -/** Offset 0x05D9 - Turn Around Timing Training - Enables/Disable Turn Around Timing Training - $EN_DIS -**/ - UINT8 TAT; - -/** Offset 0x05DA - Memory Test - Enables/Disable Memory Test - $EN_DIS -**/ - UINT8 MEMTST; - -/** Offset 0x05DB - DIMM SPD Alias Test - Enables/Disable DIMM SPD Alias Test - $EN_DIS -**/ - UINT8 ALIASCHK; - -/** Offset 0x05DC - Receive Enable Centering 1D - Enables/Disable Receive Enable Centering 1D - $EN_DIS -**/ - UINT8 RCVENC1D; - -/** Offset 0x05DD - Retrain Margin Check - Enables/Disable Retrain Margin Check - $EN_DIS -**/ - UINT8 RMC; - -/** Offset 0x05DE - Write Drive Strength Up/Dn independently - Enables/Disable Write Drive Strength Up/Dn independently - $EN_DIS -**/ - UINT8 WRDSUDT; - -/** Offset 0x05DF - ECC Support - Enables/Disable ECC Support - $EN_DIS -**/ - UINT8 EccSupport; - -/** Offset 0x05E0 - Ibecc - In-Band ECC Support - $EN_DIS -**/ - UINT8 Ibecc; - -/** Offset 0x05E1 - IbeccParity - In-Band ECC Parity Control - $EN_DIS -**/ - UINT8 IbeccParity; - -/** Offset 0x05E2 - IbeccOperationMode - In-Band ECC Operation Mode - 0:Protect base on address range, 1: Non-protected, 2: All protected -**/ - UINT8 IbeccOperationMode; - -/** Offset 0x05E3 - IbeccProtectedRegionEnable - In-Band ECC Protected Region Enable - $EN_DIS -**/ - UINT8 IbeccProtectedRegionEnable[8]; - -/** Offset 0x05EB -**/ - UINT8 UnusedUpdSpace15[1]; - -/** Offset 0x05EC - IbeccProtectedRegionBases - IBECC Protected Region Bases -**/ - UINT16 IbeccProtectedRegionBase[8]; - -/** Offset 0x05FC - IbeccProtectedRegionMasks - IBECC Protected Region Masks -**/ - UINT16 IbeccProtectedRegionMask[8]; - -/** Offset 0x060C - Memory Remap - Enables/Disable Memory Remap - $EN_DIS -**/ - UINT8 RemapEnable; - -/** Offset 0x060D - Rank Interleave support - Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at - the same time. - $EN_DIS -**/ - UINT8 RankInterleave; - -/** Offset 0x060E - Enhanced Interleave support - Enables/Disable Enhanced Interleave support - $EN_DIS -**/ - UINT8 EnhancedInterleave; - -/** Offset 0x060F - Ch Hash Support - Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode - $EN_DIS -**/ - UINT8 ChHashEnable; - -/** Offset 0x0610 - Extern Therm Status - Enables/Disable Extern Therm Status - $EN_DIS -**/ - UINT8 EnableExtts; - -/** Offset 0x0611 - DDR PowerDown and idle counter - Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) - $EN_DIS -**/ - UINT8 EnablePwrDn; - -/** Offset 0x0612 - DDR PowerDown and idle counter - Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) - $EN_DIS -**/ - UINT8 EnablePwrDnLpddr; - -/** Offset 0x0613 - SelfRefresh Enable - Enables/Disable SelfRefresh Enable - $EN_DIS -**/ - UINT8 SrefCfgEna; - -/** Offset 0x0614 - Throttler CKEMin Defeature - Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) - $EN_DIS -**/ - UINT8 ThrtCkeMinDefeatLpddr; - -/** Offset 0x0615 - Throttler CKEMin Defeature - Enables/Disable Throttler CKEMin Defeature - $EN_DIS -**/ - UINT8 ThrtCkeMinDefeat; - -/** Offset 0x0616 - Enable RH Prevention - Enables/Disable RH Prevention - $EN_DIS -**/ - UINT8 RhPrevention; - -/** Offset 0x0617 - Exit On Failure (MRC) - Enables/Disable Exit On Failure (MRC) - $EN_DIS -**/ - UINT8 ExitOnFailure; - -/** Offset 0x0618 - New Features 1 - MRC - New Feature Enabling 1, <b>0:Disable</b>, 1:Enable - 0:Disable, 1:Enable -**/ - UINT8 NewFeatureEnable1; - -/** Offset 0x0619 - New Features 2 - MRC - New Feature Enabling 2, <b>0:Disable</b>, 1:Enable - 0:Disable, 1:Enable -**/ - UINT8 NewFeatureEnable2; - -/** Offset 0x061A - Duty Cycle Correction Training - Enable/Disable Duty Cycle Correction Training - $EN_DIS -**/ - UINT8 DCC; - -/** Offset 0x061B - Read Voltage Centering 1D - Enable/Disable Read Voltage Centering 1D - $EN_DIS -**/ - UINT8 RDVC1D; - -/** Offset 0x061C - TxDqTCO Comp Training - Enable/Disable TxDqTCO Comp Training - $EN_DIS -**/ - UINT8 TXTCO; - -/** Offset 0x061D - ClkTCO Comp Training - Enable/Disable ClkTCO Comp Training - $EN_DIS -**/ - UINT8 CLKTCO; - -/** Offset 0x061E - CMD Slew Rate Training - Enable/Disable CMD Slew Rate Training - $EN_DIS -**/ - UINT8 CMDSR; - -/** Offset 0x061F - CMD Drive Strength and Tx Equalization - Enable/Disable CMD Drive Strength and Tx Equalization - $EN_DIS -**/ - UINT8 CMDDSEQ; - -/** Offset 0x0620 - DIMM CA ODT Training - Enable/Disable DIMM CA ODT Training - $EN_DIS -**/ - UINT8 DIMMODTCA; - -/** Offset 0x0621 - TxDqsTCO Comp Training - Enable/Disable TxDqsTCO Comp Training - $EN_DIS -**/ - UINT8 TXTCODQS; - -/** Offset 0x0622 - CMD/CTL Drive Strength Up/Dn 2D - Enable/Disable CMD/CTL Drive Strength Up/Dn 2D - $EN_DIS -**/ - UINT8 CMDDRUD; - -/** Offset 0x0623 - VccDLL Bypass Training - Enable/Disable VccDLL Bypass Training - $EN_DIS -**/ - UINT8 VCCDLLBP; - -/** Offset 0x0624 - PanicVttDnLp Training - Enable/Disable PanicVttDnLp Training - $EN_DIS -**/ - UINT8 PVTTDNLP; - -/** Offset 0x0625 - Read Vref Decap Training* - Enable/Disable Read Vref Decap Training* - $EN_DIS -**/ - UINT8 RDVREFDC; - -/** Offset 0x0626 - Vddq Training - Enable/Disable Vddq Training - $EN_DIS -**/ - UINT8 VDDQT; - -/** Offset 0x0627 - Rank Margin Tool Per Bit - Enable/Disable Rank Margin Tool Per Bit - $EN_DIS -**/ - UINT8 RMTBIT; - -/** Offset 0x0628 - Override Performance Downgrade for Mixed Memory - Disable/Enables Override Performance Downgrade for Mixed Memory - $EN_DIS -**/ - UINT8 OverrideDowngradeForMixedMemory; - -/** Offset 0x0629 -**/ - UINT8 Reserved2[1]; - -/** Offset 0x062A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP - $EN_DIS -**/ - UINT8 Ddr4DdpSharedClock; - -/** Offset 0x062B - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP - ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP - $EN_DIS -**/ - UINT8 Ddr4DdpSharedZq; - -/** Offset 0x062C - Ch Hash Interleaved Bit - Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave - the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 - 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 -**/ - UINT8 ChHashInterleaveBit; - -/** Offset 0x062D -**/ - UINT8 UnusedUpdSpace16; - -/** Offset 0x062E - Ch Hash Mask - Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to - BITS [19:6] Default is 0x0830 -**/ - UINT16 ChHashMask; - -/** Offset 0x0630 - Base reference clock value - Base reference clock value, in Hertz(Default is 100Hz) - 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz -**/ - UINT32 BClkFrequency; - -/** Offset 0x0634 - EPG DIMM Idd3N - Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on - a per DIMM basis. Default is 26 -**/ - UINT16 Idd3n; - -/** Offset 0x0636 - EPG DIMM Idd3P - Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated - on a per DIMM basis. Default is 11 -**/ - UINT16 Idd3p; - -/** Offset 0x0638 - RH Activation Probability - RH Activation Probability, Probability value is 1/2^(inputvalue) -**/ - UINT8 RhActProbability; - -/** Offset 0x0639 - Idle Energy Mc0Ch0Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyMc0Ch0Dimm0; - -/** Offset 0x063A - Idle Energy Mc0Ch0Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyMc0Ch0Dimm1; - -/** Offset 0x063B - Idle Energy Mc0Ch1Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyMc0Ch1Dimm0; - -/** Offset 0x063C - Idle Energy Mc0Ch1Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyMc0Ch1Dimm1; - -/** Offset 0x063D - Idle Energy Mc1Ch0Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyMc1Ch0Dimm0; - -/** Offset 0x063E - Idle Energy Mc1Ch0Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyMc1Ch0Dimm1; - -/** Offset 0x063F - Idle Energy Mc1Ch1Dimm0 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyMc1Ch1Dimm0; - -/** Offset 0x0640 - Idle Energy Mc1Ch1Dimm1 - Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) -**/ - UINT8 IdleEnergyMc1Ch1Dimm1; - -/** Offset 0x0641 - PowerDown Energy Mc0Ch0Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) -**/ - UINT8 PdEnergyMc0Ch0Dimm0; - -/** Offset 0x0642 - PowerDown Energy Mc0Ch0Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) -**/ - UINT8 PdEnergyMc0Ch0Dimm1; - -/** Offset 0x0643 - PowerDown Energy Mc0Ch1Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) -**/ - UINT8 PdEnergyMc0Ch1Dimm0; - -/** Offset 0x0644 - PowerDown Energy Mc0Ch1Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) -**/ - UINT8 PdEnergyMc0Ch1Dimm1; - -/** Offset 0x0645 - PowerDown Energy Mc1Ch0Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) -**/ - UINT8 PdEnergyMc1Ch0Dimm0; - -/** Offset 0x0646 - PowerDown Energy Mc1Ch0Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) -**/ - UINT8 PdEnergyMc1Ch0Dimm1; - -/** Offset 0x0647 - PowerDown Energy Mc1Ch1Dimm0 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) -**/ - UINT8 PdEnergyMc1Ch1Dimm0; - -/** Offset 0x0648 - PowerDown Energy Mc1Ch1Dimm1 - PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) -**/ - UINT8 PdEnergyMc1Ch1Dimm1; - -/** Offset 0x0649 - Activate Energy Mc0Ch0Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyMc0Ch0Dimm0; - -/** Offset 0x064A - Activate Energy Mc0Ch0Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyMc0Ch0Dimm1; - -/** Offset 0x064B - Activate Energy Mc0Ch1Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyMc0Ch1Dimm0; - -/** Offset 0x064C - Activate Energy Mc0Ch1Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyMc0Ch1Dimm1; - -/** Offset 0x064D - Activate Energy Mc1Ch0Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyMc1Ch0Dimm0; - -/** Offset 0x064E - Activate Energy Mc1Ch0Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyMc1Ch0Dimm1; - -/** Offset 0x064F - Activate Energy Mc1Ch1Dimm0 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyMc1Ch1Dimm0; - -/** Offset 0x0650 - Activate Energy Mc1Ch1Dimm1 - Activate Energy Contribution, range[255;0],(172= Def) -**/ - UINT8 ActEnergyMc1Ch1Dimm1; - -/** Offset 0x0651 - Read Energy Mc0Ch0Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyMc0Ch0Dimm0; - -/** Offset 0x0652 - Read Energy Mc0Ch0Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyMc0Ch0Dimm1; - -/** Offset 0x0653 - Read Energy Mc0Ch1Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyMc0Ch1Dimm0; - -/** Offset 0x0654 - Read Energy Mc0Ch1Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyMc0Ch1Dimm1; - -/** Offset 0x0655 - Read Energy Mc1Ch0Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyMc1Ch0Dimm0; - -/** Offset 0x0656 - Read Energy Mc1Ch0Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyMc1Ch0Dimm1; - -/** Offset 0x0657 - Read Energy Mc1Ch1Dimm0 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyMc1Ch1Dimm0; - -/** Offset 0x0658 - Read Energy Mc1Ch1Dimm1 - Read Energy Contribution, range[255;0],(212= Def) -**/ - UINT8 RdEnergyMc1Ch1Dimm1; - -/** Offset 0x0659 - Write Energy Mc0Ch0Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyMc0Ch0Dimm0; - -/** Offset 0x065A - Write Energy Mc0Ch0Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyMc0Ch0Dimm1; - -/** Offset 0x065B - Write Energy Mc0Ch1Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyMc0Ch1Dimm0; - -/** Offset 0x065C - Write Energy Mc0Ch1Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyMc0Ch1Dimm1; - -/** Offset 0x065D - Write Energy Mc1Ch0Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyMc1Ch0Dimm0; - -/** Offset 0x065E - Write Energy Mc1Ch0Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyMc1Ch0Dimm1; - -/** Offset 0x065F - Write Energy Mc1Ch1Dimm0 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyMc1Ch1Dimm0; - -/** Offset 0x0660 - Write Energy Mc1Ch1Dimm1 - Write Energy Contribution, range[255;0],(221= Def) -**/ - UINT8 WrEnergyMc1Ch1Dimm1; - -/** Offset 0x0661 - Throttler CKEMin Timer - Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). - Dfault is 0x00 -**/ - UINT8 ThrtCkeMinTmr; - -/** Offset 0x0662 - Rapl Power Floor Ch0 - Power budget ,range[255;0],(0= 5.3W Def) -**/ - UINT8 RaplPwrFlCh0; - -/** Offset 0x0663 - Rapl Power Floor Ch1 - Power budget ,range[255;0],(0= 5.3W Def) -**/ - UINT8 RaplPwrFlCh1; - -/** Offset 0x0664 - Command Rate Support - CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs - 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS -**/ - UINT8 EnCmdRate; - -/** Offset 0x0665 - REFRESH_2X_MODE - 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot - 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only -**/ - UINT8 Refresh2X; - -/** Offset 0x0666 - Energy Performance Gain - Enable/disable(default) Energy Performance Gain. - $EN_DIS -**/ - UINT8 EpgEnable; - -/** Offset 0x0667 - Row Hammer Solution - Type of method used to prevent Row Hammer. Default is Hardware RHP - 0:Hardware RHP, 1:2x Refresh -**/ - UINT8 RhSolution; - -/** Offset 0x0668 - User Manual Threshold - Disabled: Predefined threshold will be used.\n - Enabled: User Input will be used. - $EN_DIS -**/ - UINT8 UserThresholdEnable; - -/** Offset 0x0669 - User Manual Budget - Disabled: Configuration of memories will defined the Budget value.\n - Enabled: User Input will be used. - $EN_DIS -**/ - UINT8 UserBudgetEnable; - -/** Offset 0x066A - Power Down Mode - This option controls command bus tristating during idle periods - 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto -**/ - UINT8 PowerDownMode; - -/** Offset 0x066B - Pwr Down Idle Timer - The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means - AUTO: 64 for ULX/ULT, 128 for DT/Halo -**/ - UINT8 PwdwnIdleCounter; - -/** Offset 0x066C - Page Close Idle Timeout - This option controls Page Close Idle Timeout - 0:Enabled, 1:Disabled -**/ - UINT8 DisPgCloseIdleTimeout; - -/** Offset 0x066D - Bitmask of ranks that have CA bus terminated - Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, - Rank0 is terminating and Rank1 is non-terminating</b> -**/ - UINT8 CmdRanksTerminated; - -/** Offset 0x066E - PcdSerialDebugLevel - Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, - Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, - Info & Verbose. - 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load - Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose -**/ - UINT8 PcdSerialDebugLevel; - -/** Offset 0x066F - Fivr Faults - Fivr Faults; 0: Disabled; <b>1: Enabled.</b> - $EN_DIS -**/ - UINT8 FivrFaults; - -/** Offset 0x0670 - Fivr Efficiency - Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> - $EN_DIS -**/ - UINT8 FivrEfficiency; - -/** Offset 0x0671 - Safe Mode Support - This option configures the varous items in the IO and MC to be more conservative.(def=Disable) - $EN_DIS -**/ - UINT8 SafeMode; - -/** Offset 0x0672 - Ask MRC to clear memory content - Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. - $EN_DIS -**/ - UINT8 CleanMemory; - -/** Offset 0x0673 - LpDdrDqDqsReTraining - Enables/Disable LpDdrDqDqsReTraining - $EN_DIS -**/ - UINT8 LpDdrDqDqsReTraining; - -/** Offset 0x0674 - TCSS USB Port Enable - Bitmap for per port enabling -**/ - UINT8 UsbTcPortEnPreMem; - -/** Offset 0x0675 -**/ - UINT8 UnusedUpdSpace17; - -/** Offset 0x0676 - Post Code Output Port - This option configures Post Code Output Port -**/ - UINT16 PostCodeOutputPort; - -/** Offset 0x0678 - RMTLoopCount - Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO -**/ - UINT8 RMTLoopCount; - -/** Offset 0x0679 - Enable/Disable SA CRID - Enable: SA CRID, Disable (Default): SA CRID - $EN_DIS -**/ - UINT8 CridEnable; - -/** Offset 0x067A - WRC Feature - Enable/Disable WRC (Write Cache) feature of IOP. When feature is enabled, supports - IO devices allocating onto the ring and into LLC. WRC is fused on by default. - $EN_DIS -**/ - UINT8 WrcFeatureEnable; - -/** Offset 0x067B -**/ - UINT8 UnusedUpdSpace18[1]; - -/** Offset 0x067C - BCLK RFI Frequency - Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No - RFI Tuning</b>. Range is 98Mhz-100Mhz. -**/ - UINT32 BclkRfiFreq[4]; - -/** Offset 0x068C - Size of PCIe IMR. - Size of PCIe IMR in megabytes -**/ - UINT16 PcieImrSize; - -/** Offset 0x068E - Enable PCIe IMR - 0: Disable(AUTO), 1: Enable - $EN_DIS -**/ - UINT8 PcieImrEnabled; - -/** Offset 0x068F - Enable PCIe IMR - 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select - the Root port location from PCH PCIe or SA PCIe - $EN_DIS -**/ - UINT8 PcieImrRpLocation; - -/** Offset 0x0690 - Root port number for IMR. - Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port - from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 -**/ - UINT8 PcieImrRpSelection; - -/** Offset 0x0691 - SerialDebugMrcLevel - MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, - Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, - Info & Verbose. - 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load - Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose -**/ - UINT8 SerialDebugMrcLevel; - -/** Offset 0x0692 - Mem Boot Mode - 0: BOOT_MODE_1LM(Default), 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION - 0: BOOT_MODE_1LM, 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION -**/ - UINT8 MemBootMode; - -/** Offset 0x0693 - PCIe ASPM programming will happen in relation to the Oprom - This option is specifically needed for ASPM configuration in 2LM feature - 0:Disabled, 1:L0, 2:L1, 3:L0L1, 4:Auto -**/ - UINT8 Peg3Aspm; - -/** Offset 0x0694 - MFVC WRR VC Arbitration - 0: DEFAULT_PHASES(Default), 1: PROGRAM_128PHASES - 0: DEFAULT_PHASES, 1: PROGRAM_128PHASES -**/ - UINT8 MfvcWrrArb; - -/** Offset 0x0695 - BZM Support - 1: enable, 0: disable(Default), Enable/disable setting for Boot-time Zero Memory support - $EN_DIS -**/ - UINT8 BzmSupport; - -/** Offset 0x0696 - VcId_7_0 values - Select VC ID for arbitration -**/ - UINT8 VcId_7_0[16]; - -/** Offset 0x06A6 - Set Hw Parameters enable/disable - 1: enable, 0: disable, Enable/disable setting of HW parameters - $EN_DIS -**/ - UINT8 SetHwParameters; - -/** Offset 0x06A7 -**/ - UINT8 UnusedUpdSpace19; - -/** Offset 0x06A8 - LTR L1.2 Threshold Value - LTR L1.2 Threshold Value -**/ - UINT16 Ltr_L1D2_ThVal; - -/** Offset 0x06AA - LTR L1.2 Threshold Scale - LTR L1.2 Threshold Scale -**/ - UINT8 Ltr_L1D2_ThScale; - -/** Offset 0x06AB - system power state - system power state indicates the platform power state -**/ - UINT8 SysPwrState; - -/** Offset 0x06AC - Media Death Notification Enable/Disable - 1: enable, 0: disable, Enable/disable for Media Death Notification - $EN_DIS -**/ - UINT8 MediaDeathNotification; - -/** Offset 0x06AD - Health Log Notification Enable/Disable - 1: enable, 0: disable, Enable/disable for Health Log Notification - $EN_DIS -**/ - UINT8 HealthLogNotification; - -/** Offset 0x06AE - Temp crosses below TempThrottle Notification Enable/Disable - 1: enable, 0: disable, Enable/disable for Temp crosses below TempThrottle Notification - $EN_DIS -**/ - UINT8 TempBelowThrottleNotification; - -/** Offset 0x06AF - Temp crosses above TempThrottle Notification Enable/Disable - 1: enable, 0: disable, Enable/disable for Temp crosses above TempThrottle Notification - $EN_DIS -**/ - UINT8 TempAboveThrottleNotification; - -/** Offset 0x06B0 - Missing Commit Bit Notification Enable/Disable - 1: enable, 0: disable, Enable/disable for Missing Commit Bit Notification - $EN_DIS -**/ - UINT8 MissingCommitBitNotification; - -/** Offset 0x06B1 - NVMeHoldDisableBit - 1: enable, 0: disable, Enable/disable for NVMeHoldDisableBit - $EN_DIS -**/ - UINT8 NVMeHoldDisableBit; - -/** Offset 0x06B2 - Ddr4OneDpc - DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, - or on both (default) - 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled -**/ - UINT8 Ddr4OneDpc; - -/** Offset 0x06B3 - Ch Hash Override POR settings - Enable/Disable Override Channel Hash Support POR values - $EN_DIS -**/ - UINT8 ChHashOverride; - -/** Offset 0x06B4 - PDA Enumeration - Enables/Disable PDA Enumeration - $EN_DIS -**/ - UINT8 PDA; - -/** Offset 0x06B5 - DPin Policy - Set DPin Policy. Internal Only:All display ports are for internal only. External - First:All display ports are for external only, if there is no External DP-In presence - presents then IOM will use all ports internal only - 0: Internal Only, 1: External First -**/ - UINT8 DpInExternalEn; - -/** Offset 0x06B6 - DPin External Ports Number - Total number of External Gfx DpIn Port present on Board. Currently hardware wise - max 0x04 DpIn port supported, however DpIn module can handle upto 0x08 DpIn ports -**/ - UINT8 NumberOfDpInPort; - -/** Offset 0x06B7 - DPin External Port Connect Map - Indicate which Dp-In port connection detected. Each BIT stand for one Dp-In port. -**/ - UINT8 DpInPortConnectMap; - -/** Offset 0x06B8 - Command Pins Mapping - BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller - 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. -**/ - UINT8 Lp5CccConfig[4]; - -/** Offset 0x06BC - Command Pins Mirrored - BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller - 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. -**/ - UINT32 CmdMirror[1]; - -/** Offset 0x06C0 - CPU BCLK SSC Enable - Enable/Disable CPU BCLK Spread Spectrum. Default is Enabled. - $EN_DIS -**/ - UINT8 CpuBclkSpread; - -/** Offset 0x06C1 - McParity - CMI/MC Parity Control - $EN_DIS -**/ - UINT8 McParity; - -/** Offset 0x06C2 - Vddq Voltage Override - # is multiple of 1mV where 0 means Auto. -**/ - UINT16 VddqVoltageOverride; - -/** Offset 0x06C4 - Extended Bank Hashing - Eanble/Disable ExtendedBankHashing - $EN_DIS -**/ - UINT8 ExtendedBankHashing; - -/** Offset 0x06C5 - Skip external display device scanning - Enable: Do not scan for external display device, Disable (Default): Scan external - display devices - $EN_DIS -**/ - UINT8 SkipExtGfxScan; - -/** Offset 0x06C6 - Generate BIOS Data ACPI Table - Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it - $EN_DIS -**/ - UINT8 BdatEnable; - -/** Offset 0x06C7 - Detect External Graphics device for LegacyOpROM - Detect and report if external graphics device only support LegacyOpROM or not (to - support CSM auto-enable). Enable(Default)=1, Disable=0 - $EN_DIS -**/ - UINT8 ScanExtGfxForLegacyOpRom; - -/** Offset 0x06C8 - Lock PCU Thermal Management registers - Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 - $EN_DIS -**/ - UINT8 LockPTMregs; - -/** Offset 0x06C9 - Rsvd - Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): - Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE - peak values unmodified - $EN_DIS -**/ - UINT8 PegGen3Rsvd; - -/** Offset 0x06CA - Panel Power Enable - Control for enabling/disabling VDD force bit (Required only for early enabling of - eDP panel). 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 PanelPowerEnable; - -/** Offset 0x06CB - BdatTestType - Indicates the type of Memory Training data to populate into the BDAT ACPI table. - 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D -**/ - UINT8 BdatTestType; - -/** Offset 0x06CC - PMR Size - Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot -**/ - UINT32 DmaBufferSize; - -/** Offset 0x06D0 - VT-d/IOMMU Boot Policy - BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS -**/ - UINT8 PreBootDmaMask; - -/** Offset 0x06D1 - Enable/Disable DMI GEN3 Hardware Eq - Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default): - Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 DmiHweq; - -/** Offset 0x06D2 - Enable/Disable CPU DMI GEN3 Phase 23 Bypass - CPU DMI GEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1): - Enable Phase 23 Bypass - $EN_DIS -**/ - UINT8 Gen3EqPhase23Bypass; - -/** Offset 0x06D3 - Enable/Disable CPU DMI GEN3 Phase 3 Bypass - CPU DMI GEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1): - Enable Phase 3 Bypass - $EN_DIS -**/ - UINT8 Gen3EqPhase3Bypass; - -/** Offset 0x06D4 - Enable/Disable CPU DMI Gen3 EQ Local Transmitter Coefficient Override Enable - Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0)(Default): - Disable Local Transmitter Coefficient Override, Enabled(0x1): Enable Local Transmitter - Coefficient Override - $EN_DIS -**/ - UINT8 Gen3LtcoEnable; - -/** Offset 0x06D5 - Enable/Disable CPU DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable - Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0): Disable Remote - Transmitter Coefficient/Preset Override, Enabled(0x1)(Default): Enable Remote - Transmitter Coefficient/Preset Override - $EN_DIS -**/ - UINT8 Gen3RtcoRtpoEnable; - -/** Offset 0x06D6 - DMI Gen3 Transmitter Pre-Cursor Coefficient - Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10, - 2 is default for each lane -**/ - UINT8 DmiGen3Ltcpre[8]; - -/** Offset 0x06DE - DMI Gen3 Transmitter Post-Cursor Coefficient - Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default - for each lane -**/ - UINT8 DmiGen3Ltcpo[8]; - -/** Offset 0x06E6 - PCIE Hw Eq Gen3 CoeffList Cm - CPU_PCIE_EQ_PARAM. Coefficient C-1. -**/ - UINT8 CpuDmiHwEqGen3CoeffListCm[8]; - -/** Offset 0x06EE - PCIE Hw Eq Gen3 CoeffList Cp - CPU_PCIE_EQ_PARAM. Coefficient C+1. -**/ - UINT8 CpuDmiHwEqGen3CoeffListCp[8]; - -/** Offset 0x06F6 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable - Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable, - Manual(0x1): Enable DmiGen3DsPresetEnable - $EN_DIS -**/ - UINT8 DmiGen3DsPresetEnable; - -/** Offset 0x06F7 - DMI Gen3 Root port preset Rx values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default - for each lane -**/ - UINT8 DmiGen3DsPortRxPreset[8]; - -/** Offset 0x06FF - DMI Gen3 Root port preset Tx values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default - for each lane -**/ - UINT8 DmiGen3DsPortTxPreset[8]; - -/** Offset 0x0707 - Program DMI GEN3 Extended number of VC - (DEPRECATED) -**/ - UINT8 DmiGen3MultiVC; - -/** Offset 0x0708 - Enable/Disable DMI GEN3 DmiGen3Vc1Control - (DEPRECATED) - $EN_DIS -**/ - UINT8 DmiGen3Vc1Control; - -/** Offset 0x0709 - Enable/Disable DMI GEN3 DmiGen3VcMControl - (DEPRECATED) - $EN_DIS -**/ - UINT8 DmiGen3VcMControl; - -/** Offset 0x070A - DMI Secure Register Lock:{Combo - (DEPRECATED) - 0:Disable, 1:Enable -**/ - UINT8 DmiSrl; - -/** Offset 0x070B - DMI Scramble Enable:{Combo - (DEPRECATED) - 0:Disable, 1:Enable -**/ - UINT8 DmiScramble; - -/** Offset 0x070C - DMI Max Payload Size:{Combo - (DEPRECATED) - 0:Auto, 1:128 TLP, 2:256 TLP -**/ - UINT8 DmiMaxPayload; - -/** Offset 0x070D - DPin Dynamic Switch Policy - Dynamic one-time switch from iGFx to dGFx after boot to OS - 0: Disble, 1: Enable -**/ - UINT8 DPinDynamicSwitch; - -/** Offset 0x070E - Delay before sending commn - Delay before sending dynamic one-time switch cmd to IOM, ACPI BIOS consumes this - value and proceed delay when _DSM is invoked: 0=Minimal, 5000=Maximum, default - is 0 second -**/ - UINT16 DPinDynamicSwitchDelay0; - -/** Offset 0x0710 - Delay before IOM de-assert HPD - Delay before IOM de-assert HPD, ACPI BIOS passes this value to IOM when sending - dynamic one-time switch command: 1000=Minimal, 5000=Maximum, default is 1000 = 1 second -**/ - UINT16 DPinDynamicSwitchDelay1; - -/** Offset 0x0712 - SaPreMemTestRsvd - Reserved for SA Pre-Mem Test - $EN_DIS -**/ - UINT8 SaPreMemTestRsvd[28]; - -/** Offset 0x072E - TotalFlashSize - Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable -**/ - UINT16 TotalFlashSize; - -/** Offset 0x0730 - BiosSize - The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != - 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected - Range) so that a BIOS Update Script can be stored in the DPR. -**/ - UINT16 BiosSize; - -/** Offset 0x0732 - SecurityTestRsvd - Reserved for SA Pre-Mem Test - $EN_DIS -**/ - UINT8 SecurityTestRsvd[12]; - -/** Offset 0x073E - Smbus dynamic power gating - Disable or Enable Smbus dynamic power gating. - $EN_DIS -**/ - UINT8 SmbusDynamicPowerGating; - -/** Offset 0x073F - Disable and Lock Watch Dog Register - Set 1 to clear WDT status, then disable and lock WDT registers. - $EN_DIS -**/ - UINT8 WdtDisableAndLock; - -/** Offset 0x0740 - SMBUS SPD Write Disable - Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write - Disable bit. For security recommendations, SPD write disable bit must be set. - $EN_DIS -**/ - UINT8 SmbusSpdWriteDisable; - -/** Offset 0x0741 - VC Type - Virtual Channel Type Select: 0: VC0, 1: VC1. - 0: VC0, 1: VC1 -**/ - UINT8 PchHdaVcType; - -/** Offset 0x0742 - Universal Audio Architecture compliance for DSP enabled system - 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox - driver or SST driver supported). - $EN_DIS -**/ - UINT8 PchHdaDspUaaCompliance; - -/** Offset 0x0743 - Enable HD Audio Link - Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkHdaEnable; - -/** Offset 0x0744 - Enable HDA SDI lanes - Enable/disable HDA SDI lanes. -**/ - UINT8 PchHdaSdiEnable[2]; - -/** Offset 0x0746 - HDA Power/Clock Gating (PGD/CGD) - Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: - FORCE_ENABLE, 2: FORCE_DISABLE. - 0: POR, 1: Force Enable, 2: Force Disable -**/ - UINT8 PchHdaTestPowerClockGating; - -/** Offset 0x0747 - Enable HD Audio DMIC_N Link - Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. -**/ - UINT8 PchHdaAudioLinkDmicEnable[2]; - -/** Offset 0x0749 -**/ - UINT8 UnusedUpdSpace20[3]; - -/** Offset 0x074C - DMIC<N> ClkA Pin Muxing (N - DMIC number) - Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_* -**/ - UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; - -/** Offset 0x0754 - DMIC<N> ClkB Pin Muxing - Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_* -**/ - UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; - -/** Offset 0x075C - Enable HD Audio DSP - Enable/disable HD Audio DSP feature. - $EN_DIS -**/ - UINT8 PchHdaDspEnable; - -/** Offset 0x075D -**/ - UINT8 UnusedUpdSpace21[3]; - -/** Offset 0x0760 - DMIC<N> Data Pin Muxing - Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_* -**/ - UINT32 PchHdaAudioLinkDmicDataPinMux[2]; - -/** Offset 0x0768 - Enable HD Audio SSP0 Link - Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 -**/ - UINT8 PchHdaAudioLinkSspEnable[6]; - -/** Offset 0x076E - Enable HD Audio SoundWire#N Link - Enable/disable HD Audio SNDW#N link. Muxed with HDA. -**/ - UINT8 PchHdaAudioLinkSndwEnable[4]; - -/** Offset 0x0772 - iDisp-Link Frequency - iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. - 4: 96MHz, 3: 48MHz -**/ - UINT8 PchHdaIDispLinkFrequency; - -/** Offset 0x0773 - iDisp-Link T-mode - iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T(Default), 4: 16T - 0: 2T, 2: 4T, 3: 8T, 4: 16T -**/ - UINT8 PchHdaIDispLinkTmode; - -/** Offset 0x0774 - iDisplay Audio Codec disconnection - 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. - $EN_DIS -**/ - UINT8 PchHdaIDispCodecDisconnect; - -/** Offset 0x0775 - Force ME DID Init Status - Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set - ME DID init stat value - $EN_DIS -**/ - UINT8 DidInitStat; - -/** Offset 0x0776 - CPU Replaced Polling Disable - Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop - $EN_DIS -**/ - UINT8 DisableCpuReplacedPolling; - -/** Offset 0x0777 - ME DID Message - (DEPRECATED)Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable - will prevent the DID message from being sent) - $EN_DIS -**/ - UINT8 SendDidMsg; - -/** Offset 0x0778 - Check HECI message before send - Test, 0: disable, 1: enable, Enable/Disable message check. - $EN_DIS -**/ - UINT8 DisableMessageCheck; - -/** Offset 0x0779 - Skip MBP HOB - Test, 0: disable, 1: enable, Enable/Disable MOB HOB. - $EN_DIS -**/ - UINT8 SkipMbpHob; - -/** Offset 0x077A - HECI2 Interface Communication - Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. - $EN_DIS -**/ - UINT8 HeciCommunication2; - -/** Offset 0x077B - Enable KT device - Test, 0: disable, 1: enable, Enable or Disable KT device. - $EN_DIS -**/ - UINT8 KtDeviceEnable; - -/** Offset 0x077C - Hybrid Graphics GPIO information for PEG 1 - Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs -**/ - UINT32 CpuPcie1Rtd3Gpio[24]; - -/** Offset 0x07DC - Hybrid Graphics GPIO information for PEG 2 - Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs -**/ - UINT32 CpuPcie2Rtd3Gpio[24]; - -/** Offset 0x083C - Hybrid Graphics GPIO information for PEG 3 - Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs -**/ - UINT32 CpuPcie3Rtd3Gpio[24]; - -/** Offset 0x089C - Skip CPU replacement check - Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check - $EN_DIS -**/ - UINT8 SkipCpuReplacementCheck; - -/** Offset 0x089D - PCI Express Dekel Workaround - Select the 1 to 9 for Dekel registers endpoint programming: 1=Minimal, 9=Maximum, - default is 2 -**/ - UINT8 CpuPcieRpDekelSquelchWa; - -/** Offset 0x089E - Serial Io Uart Debug Mode - Select SerialIo Uart Controller mode - 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, - 4:SerialIoUartSkipInit -**/ - UINT8 SerialIoUartDebugMode; - -/** Offset 0x089F -**/ - UINT8 UnusedUpdSpace22; - -/** Offset 0x08A0 - SerialIoUartDebugRxPinMux - FSPT - Select RX pin muxing for SerialIo UART used for debug -**/ - UINT32 SerialIoUartDebugRxPinMux; - -/** Offset 0x08A4 - SerialIoUartDebugTxPinMux - FSPM - Select TX pin muxing for SerialIo UART used for debug -**/ - UINT32 SerialIoUartDebugTxPinMux; - -/** Offset 0x08A8 - SerialIoUartDebugRtsPinMux - FSPM - Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* - for possible values. -**/ - UINT32 SerialIoUartDebugRtsPinMux; - -/** Offset 0x08AC - SerialIoUartDebugCtsPinMux - FSPM - Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* - for possible values. -**/ - UINT32 SerialIoUartDebugCtsPinMux; - -/** Offset 0x08B0 - Avx2 Voltage Guardband Scaling Factor - AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in - 1/100 units, where a value of 125 would apply a 1.25 scale factor. -**/ - UINT8 Avx2VoltageScaleFactor; - -/** Offset 0x08B1 - Avx512 Voltage Guardband Scaling Factor - AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 - in 1/100 units, where a value of 125 would apply a 1.25 scale factor. -**/ - UINT8 Avx512VoltageScaleFactor; - -/** Offset 0x08B2 - Lane Used of CSI port - Lane Used of each CSI port - 1:x1, 2:x2, 3:x3, 4:x4, 8:x8 -**/ - UINT8 IpuLaneUsed[8]; - -/** Offset 0x08BA - Lane Used of CSI port - Speed of each CSI port - 0:Sensor default, 1:<416Mbps, 2:<1.5Gbps, 3:<2Gbps, 4:<2.5Gbps, 5:<4Gbps, 6:>4Gbps -**/ - UINT8 CsiSpeed[8]; - -/** Offset 0x08C2 - DPmem Support - 1: enable, 0: disable(Default), Enable/disable setting for Dynamic Persistent Memory support - $EN_DIS -**/ - UINT8 DpmemSupport; - -/** Offset 0x08C3 - Core VF Point Offset Mode - Selects Core Voltage & Frequency Point Offset between Legacy and Selection modes; - <b>0: Legacy</b>; 1: Selection. - 0:Legacy, 1:Selection -**/ - UINT8 CoreVfPointOffsetMode; - -/** Offset 0x08C4 - Core VF Point Offset - Array used to specifies the Offset Voltage applied to the each selected Core VF - Point. This voltage is specified in millivolts. -**/ - UINT16 CoreVfPointOffset[15]; - -/** Offset 0x08E2 - Core VF Point Offset Prefix - Sets the CoreVfPointOffset value as positive or negative for corresponding core - VF Point; <b>0: Positive </b>; 1: Negative. - 0:Positive, 1:Negative -**/ - UINT8 CoreVfPointOffsetPrefix[15]; - -/** Offset 0x08F1 - Core VF Point Ratio - Array for the each selected Core VF Point to display the ration. -**/ - UINT8 CoreVfPointRatio[15]; - -/** Offset 0x0900 - Core VF Point Count - Number of supported Core Voltage & Frequency Point Offset -**/ - UINT8 CoreVfPointCount; - -/** Offset 0x0901 - Enable CPU CrashLog GPRs dump - Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only - disable Smm GPRs dump - 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled -**/ - UINT8 CrashLogGprs; - -/** Offset 0x0902 -**/ - UINT8 UnusedUpdSpace23[2]; - -/** Offset 0x0904 - Bitmask of disable cores - Core mask is a bitwise indication of which core should be disabled. <b>0x00=Default</b>; - Bit 0 - core 0, bit 7 - core 7. -**/ - UINT32 DisableCoreMask; - -/** Offset 0x0908 - REFRESH_PANIC_WM - <b>@deprecated</b> - Not used and has no effect, Please use RefreshWm -**/ - UINT8 RefreshPanicWm; - -/** Offset 0x0909 - REFRESH_HP_WM - <b>@deprecated</b> - Not used and has no effect, Please use RefreshWm -**/ - UINT8 RefreshHpWm; - -/** Offset 0x090A - Support Unlimited ICCMAX - Support Unlimited ICCMAX more than maximum value 255.75A; <b>0: Disabled</b>; 1: Enabled. - $EN_DIS -**/ - UINT8 UnlimitedIccMax; - -/** Offset 0x090B - Per Core Max Ratio override - Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new - favored core ratio to each Core. <b>0: Disable</b>, 1: enable - $EN_DIS -**/ - UINT8 PerCoreRatioOverride; - -/** Offset 0x090C - Per Core Current Max Ratio - Array for the Per Core Max Ratio -**/ - UINT8 PerCoreRatio[10]; - -/** Offset 0x0916 - Margin Limit Check - Margin Limit Check. Choose level of margin check - 0:Disable, 1:L1, 2:L2, 3:Both -**/ - UINT8 MarginLimitCheck; - -/** Offset 0x0917 -**/ - UINT8 UnusedUpdSpace24; - -/** Offset 0x0918 - Margin Limit L2 - % of L1 check for margin limit check -**/ - UINT16 MarginLimitL2; - -/** Offset 0x091A - Iotg Pll SscEn - Enable or disable CPU SSC. 0: Disable, <b>1: Enable</b> - $EN_DIS -**/ - UINT8 IotgPllSscEn; - -/** Offset 0x091B - GPIO Override - Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings - before moved to FSP. Available configurations 0: Disable;1: Level 1 - skips GpioSetNativePadByFunction;Level - 2 - skips GpioSetNativePadByFunction and GpioSetPadMode -**/ - UINT8 GpioOverride; - -/** Offset 0x091C - Write0 enabling - Enable/Disable Write0 - $EN_DIS -**/ - UINT8 WRITE0; - -/** Offset 0x091D -**/ - UINT8 UnusedUpdSpace25[3]; - -/** Offset 0x0920 -**/ - UINT32 VccInVoltageOverride; - -/** Offset 0x0924 - Dynamic Memory Timings Changes - Dynamic Memory Timings Changes; <b>0: Disabled</b>; 1: Enabled. - $EN_DIS -**/ - UINT8 DynamicMemoryChange; - -/** Offset 0x0925 - IbeccErrorInj - In-Band ECC Error Injection NOTE: For Debug or Development purposes only! Disable - this option for production systems. - $EN_DIS -**/ - UINT8 IbeccErrorInj; - -/** Offset 0x0926 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable - Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable, - Manual(0x1): Enable DmiGen3UsPresetEnable - $EN_DIS -**/ - UINT8 DmiGen3UsPresetEnable; - -/** Offset 0x0927 - DMI Gen3 Root port preset Rx values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default - for each lane -**/ - UINT8 DmiGen3UsPortRxPreset[8]; - -/** Offset 0x092F - DMI Gen3 Root port preset Tx values per lane - Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default - for each lane -**/ - UINT8 DmiGen3UsPortTxPreset[8]; - -/** Offset 0x0937 - BCLK Frequency Source - Clock source of BCLK OC frequency, <b>0:CPU BCLK</b>, 1:PCH BCLK, 2:External CLK - 0:CPU BCLK, 1:PCH BCLK, 2:External CLK -**/ - UINT8 BclkSource; - -/** Offset 0x0938 - CPU BCLK OC Frequency - CPU BCLK OC Frequency in 10KHz units increasing. Value 9800 (10KHz) = 98MHz <b>0 - - Auto</b>. Range is 8000-50000 (10KHz). -**/ - UINT32 CpuBclkOcFrequency; - -/** Offset 0x093C - Ring CCF Auto Gv Disable Down - Ring CCF Auto Gv Disable Down, 0: Disabled, <b>1:Fused default</b> - 0:Disabled, 1:Fused default -**/ - UINT8 RingCcfAutoGvDisable; - -/** Offset 0x093D - SA/Uncore voltage mode - SA/Uncore voltage mode; <b>0: Adaptive</b>; 1: Override. - $EN_DIS -**/ - UINT8 SaVoltageMode; - -/** Offset 0x093E - SA/Uncore Voltage Override - The SA/Uncore voltage override applicable when SA/Uncore voltage mode is in Override - mode. Valid Range 0 to 2000 -**/ - UINT16 SaVoltageOverride; - -/** Offset 0x0940 - SA/Uncore Extra Turbo voltage - Extra Turbo voltage applicable when SA/Uncore voltage mode is in Adaptive mode. - Valid Range 0 to 2000 -**/ - UINT16 SaExtraTurboVoltage; - -/** Offset 0x0942 - DdrMemoryDown - DDR Memory Down Support. - $EN_DIS -**/ - UINT8 DdrMemoryDown; - -/** Offset 0x0943 -**/ - UINT8 UnusedUpdSpace26; - -/** Offset 0x0944 - The VccIn Max Voltage Limit - This will override maximum VCCIN voltage limit to the voltage value specified. <b>0 - - no override</b> Valid Range 0 to 3000mV -**/ - UINT16 VccInMaxLimit; - -/** Offset 0x0946 - VccIO Voltage Override - This will override VccIO output voltage level to the voltage value specified. Valid - Range 0 to 2000 -**/ - UINT16 VccIoVoltageOverride; - -/** Offset 0x0948 - Boost VRef Voltage - <b> Default: 0: 0.7V </b> 1: 1.0V to support the high frequencies needed for BCLK OC. - 0: 0.7V , 1:1.0V -**/ - UINT8 BoostRefVoltage; - -/** Offset 0x0949 - Pcie Ref Pll SSC - Pcie Ref Pll SSC Percentatge. 0x0: 0.0%, 0x1: 0.1%, 0x2:0.2%, 0x3: 0.3%, 0x4: 0.4%, - 0x5: 0.5%, 0xFE: Disable, 0xFF: Auto -**/ - UINT8 PcieRefPllSsc; - -/** Offset 0x094A - Refresh Watermarks - Refresh Watermark, High, Low - 1:Enable Refresh Watermark High (Default), 0:Enable Refresh Watermark Low -**/ - UINT8 RefreshWm; - -/** Offset 0x094B -**/ - UINT8 UnusedUpdSpace27[4]; - -/** Offset 0x094F -**/ - UINT8 ReservedFspmUpd2[1]; -} FSP_M_CONFIG; - -/** Fsp M UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSPM_ARCH_UPD FspmArchUpd; - -/** Offset 0x0040 -**/ - FSP_M_CONFIG FspmConfig; - -/** Offset 0x0950 -**/ - UINT8 UnusedUpdSpace28[6]; - -/** Offset 0x0956 -**/ - UINT16 UpdTerminator; -} FSPM_UPD; - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h deleted file mode 100644 index 569eaea4e3..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h +++ /dev/null @@ -1,4219 +0,0 @@ -/** @file - -Copyright (c) 2021, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPSUPD_H__ -#define __FSPSUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - - -/// -/// Azalia Header structure -/// -typedef struct { - UINT16 VendorId; ///< Codec Vendor ID - UINT16 DeviceId; ///< Codec Device ID - UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. - UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. - UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. - UINT32 Reserved; ///< Reserved for future use. Must be set to 0. -} AZALIA_HEADER; - -/// -/// Audio Azalia Verb Table structure -/// -typedef struct { - AZALIA_HEADER Header; ///< AZALIA PCH header - UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header -} AUDIO_AZALIA_VERB_TABLE; - -/// -/// Refer to the definition of PCH_INT_PIN -/// -typedef enum { - SiPchNoInt, ///< No Interrupt Pin - SiPchIntA, - SiPchIntB, - SiPchIntC, - SiPchIntD -} SI_PCH_INT_PIN; -/// -/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. -/// -typedef struct { - UINT8 Device; ///< Device number - UINT8 Function; ///< Device function - UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) - UINT8 Irq; ///< IRQ to be set for device. -} SI_PCH_DEVICE_INTERRUPT_CONFIG; - -#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices - - -/** Fsp S Configuration -**/ -typedef struct { - -/** Offset 0x0020 - Logo Pointer - Points to PEI Display Logo Image -**/ - UINT32 LogoPtr; - -/** Offset 0x0024 - Logo Size - Size of PEI Display Logo Image -**/ - UINT32 LogoSize; - -/** Offset 0x0028 - Blt Buffer Address - Address of Blt buffer -**/ - UINT32 BltBufferAddress; - -/** Offset 0x002C - Blt Buffer Size - Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of - EFI_GRAPHICS_OUTPUT_BLT_PIXEL) -**/ - UINT32 BltBufferSize; - -/** Offset 0x0030 - Graphics Configuration Ptr - Points to VBT -**/ - UINT32 GraphicsConfigPtr; - -/** Offset 0x0034 - Enable Device 4 - Enable/disable Device 4 - $EN_DIS -**/ - UINT8 Device4Enable; - -/** Offset 0x0035 - Show SPI controller - Enable/disable to show SPI controller. - $EN_DIS -**/ - UINT8 ShowSpiController; - -/** Offset 0x0036 -**/ - UINT8 UnusedUpdSpace0[2]; - -/** Offset 0x0038 - MicrocodeRegionBase - Memory Base of Microcode Updates -**/ - UINT32 MicrocodeRegionBase; - -/** Offset 0x003C - MicrocodeRegionSize - Size of Microcode Updates -**/ - UINT32 MicrocodeRegionSize; - -/** Offset 0x0040 - Turbo Mode - Enable/Disable Turbo mode. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 TurboMode; - -/** Offset 0x0041 - Enable SATA SALP Support - Enable/disable SATA Aggressive Link Power Management. - $EN_DIS -**/ - UINT8 SataSalpSupport; - -/** Offset 0x0042 - Enable SATA ports - Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, - and so on. -**/ - UINT8 SataPortsEnable[8]; - -/** Offset 0x004A - Enable SATA DEVSLP Feature - Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each - port, byte0 for port0, byte1 for port1, and so on. -**/ - UINT8 SataPortsDevSlp[8]; - -/** Offset 0x0052 - Enable USB2 ports - Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. -**/ - UINT8 PortUsb20Enable[16]; - -/** Offset 0x0062 - Enable USB3 ports - Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. -**/ - UINT8 PortUsb30Enable[10]; - -/** Offset 0x006C - Enable xDCI controller - Enable/disable to xDCI controller. - $EN_DIS -**/ - UINT8 XdciEnable; - -/** Offset 0x006D -**/ - UINT8 UnusedUpdSpace1[3]; - -/** Offset 0x0070 - Address of PCH_DEVICE_INTERRUPT_CONFIG table. - The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. -**/ - UINT32 DevIntConfigPtr; - -/** Offset 0x0074 - Number of DevIntConfig Entry - Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr - must not be NULL. -**/ - UINT8 NumOfDevIntConfig; - -/** Offset 0x0075 - PIRQx to IRQx Map Config - PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for - PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy - 8259 PCI mode. -**/ - UINT8 PxRcConfig[8]; - -/** Offset 0x007D - Select GPIO IRQ Route - GPIO IRQ Select. The valid value is 14 or 15. -**/ - UINT8 GpioIrqRoute; - -/** Offset 0x007E - Select SciIrqSelect - SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. -**/ - UINT8 SciIrqSelect; - -/** Offset 0x007F - Select TcoIrqSelect - TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. -**/ - UINT8 TcoIrqSelect; - -/** Offset 0x0080 - Enable/Disable Tco IRQ - Enable/disable TCO IRQ - $EN_DIS -**/ - UINT8 TcoIrqEnable; - -/** Offset 0x0081 - PCH HDA Verb Table Entry Number - Number of Entries in Verb Table. -**/ - UINT8 PchHdaVerbTableEntryNum; - -/** Offset 0x0082 -**/ - UINT8 UnusedUpdSpace2[2]; - -/** Offset 0x0084 - PCH HDA Verb Table Pointer - Pointer to Array of pointers to Verb Table. -**/ - UINT32 PchHdaVerbTablePtr; - -/** Offset 0x0088 - PCH HDA Codec Sx Wake Capability - Capability to detect wake initiated by a codec in Sx -**/ - UINT8 PchHdaCodecSxWakeCapability; - -/** Offset 0x0089 - Enable SATA - Enable/disable SATA controller. - $EN_DIS -**/ - UINT8 SataEnable; - -/** Offset 0x008A - SATA Mode - Select SATA controller working mode. - 0:AHCI, 1:RAID -**/ - UINT8 SataMode; - -/** Offset 0x008B - SPIn Device Mode - Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available - modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden -**/ - UINT8 SerialIoSpiMode[7]; - -/** Offset 0x0092 - SPI<N> Chip Select Polarity - Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow, - 1:SerialIoSpiCsActiveHigh -**/ - UINT8 SerialIoSpiCsPolarity[14]; - -/** Offset 0x00A0 - SPI<N> Chip Select Enable - 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled -**/ - UINT8 SerialIoSpiCsEnable[14]; - -/** Offset 0x00AE - SPIn Default Chip Select Output - Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available - options: 0:CS0, 1:CS1 -**/ - UINT8 SerialIoSpiDefaultCsOutput[7]; - -/** Offset 0x00B5 - SPIn Default Chip Select Mode HW/SW - Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, - SPI1, ... Available options: 0:HW, 1:SW -**/ - UINT8 SerialIoSpiCsMode[7]; - -/** Offset 0x00BC - SPIn Default Chip Select State Low/High - Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... - Available options: 0:Low, 1:High -**/ - UINT8 SerialIoSpiCsState[7]; - -/** Offset 0x00C3 - UARTn Device Mode - Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available - modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, - 4:SerialIoUartSkipInit -**/ - UINT8 SerialIoUartMode[7]; - -/** Offset 0x00CA -**/ - UINT8 UnusedUpdSpace3[2]; - -/** Offset 0x00CC - Default BaudRate for each Serial IO UART - Set default BaudRate Supported from 0 - default to 6000000 -**/ - UINT32 SerialIoUartBaudRate[7]; - -/** Offset 0x00E8 - Default ParityType for each Serial IO UART - Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity -**/ - UINT8 SerialIoUartParity[7]; - -/** Offset 0x00EF - Default DataBits for each Serial IO UART - Set default word length. 0: Default, 5,6,7,8 -**/ - UINT8 SerialIoUartDataBits[7]; - -/** Offset 0x00F6 - Default StopBits for each Serial IO UART - Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: - TwoStopBits -**/ - UINT8 SerialIoUartStopBits[7]; - -/** Offset 0x00FD - Power Gating mode for each Serial IO UART that works in COM mode - Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto -**/ - UINT8 SerialIoUartPowerGating[7]; - -/** Offset 0x0104 - Enable Dma for each Serial IO UART that supports it - Set DMA/PIO mode. 0: Disabled, 1: Enabled -**/ - UINT8 SerialIoUartDmaEnable[7]; - -/** Offset 0x010B - Enables UART hardware flow control, CTS and RTS lines - Enables UART hardware flow control, CTS and RTS lines. -**/ - UINT8 SerialIoUartAutoFlow[7]; - -/** Offset 0x0112 -**/ - UINT8 UnusedUpdSpace4[2]; - -/** Offset 0x0114 - SerialIoUartRtsPinMuxPolicy - Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* - for possible values. -**/ - UINT32 SerialIoUartRtsPinMuxPolicy[7]; - -/** Offset 0x0130 - SerialIoUartCtsPinMuxPolicy - Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* - for possible values. -**/ - UINT32 SerialIoUartCtsPinMuxPolicy[7]; - -/** Offset 0x014C - SerialIoUartRxPinMuxPolicy - Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for - possible values. -**/ - UINT32 SerialIoUartRxPinMuxPolicy[7]; - -/** Offset 0x0168 - SerialIoUartTxPinMuxPolicy - Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for - possible values. -**/ - UINT32 SerialIoUartTxPinMuxPolicy[7]; - -/** Offset 0x0184 - UART Number For Debug Purpose - UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, - 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used - for debug purpose. - 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6 -**/ - UINT8 SerialIoDebugUartNumber; - -/** Offset 0x0185 - Serial IO UART DBG2 table - Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b> - 1: Enable. -**/ - UINT8 SerialIoUartDbg2[7]; - -/** Offset 0x018C - I2Cn Device Mode - Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available - modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden -**/ - UINT8 SerialIoI2cMode[8]; - -/** Offset 0x0194 - Serial IO I2C SDA Pin Muxing - Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for - possible values. -**/ - UINT32 PchSerialIoI2cSdaPinMux[8]; - -/** Offset 0x01B4 - Serial IO I2C SCL Pin Muxing - Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for - possible values. -**/ - UINT32 PchSerialIoI2cSclPinMux[8]; - -/** Offset 0x01D4 - PCH SerialIo I2C Pads Termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination - respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. -**/ - UINT8 PchSerialIoI2cPadsTermination[8]; - -/** Offset 0x01DC - ISH GP GPIO Pin Muxing - Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER -**/ - UINT32 IshGpGpioPinMuxing[8]; - -/** Offset 0x01FC - ISH UART Rx Pin Muxing - Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_* -**/ - UINT32 IshUartRxPinMuxing[3]; - -/** Offset 0x0208 - ISH UART Tx Pin Muxing - Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_* -**/ - UINT32 IshUartTxPinMuxing[3]; - -/** Offset 0x0214 - ISH UART Rts Pin Muxing - Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values. -**/ - UINT32 IshUartRtsPinMuxing[3]; - -/** Offset 0x0220 - ISH UART Rts Pin Muxing - Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values. -**/ - UINT32 IshUartCtsPinMuxing[3]; - -/** Offset 0x022C - ISH I2C SDA Pin Muxing - Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values. -**/ - UINT32 IshI2cSdaPinMuxing[3]; - -/** Offset 0x0238 - ISH I2C SCL Pin Muxing - Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values. -**/ - UINT32 IshI2cSclPinMuxing[3]; - -/** Offset 0x0244 - ISH SPI MOSI Pin Muxing - Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values. -**/ - UINT32 IshSpiMosiPinMuxing[2]; - -/** Offset 0x024C - ISH SPI MISO Pin Muxing - Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values. -**/ - UINT32 IshSpiMisoPinMuxing[2]; - -/** Offset 0x0254 - ISH SPI CLK Pin Muxing - Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values. -**/ - UINT32 IshSpiClkPinMuxing[2]; - -/** Offset 0x025C - ISH SPI CS#N Pin Muxing - Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS<N>_* for possible - values. N-SPI number, 0-1. -**/ - UINT32 IshSpiCsPinMuxing[4]; - -/** Offset 0x026C - ISH GP GPIO Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination - respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index - 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31 -**/ - UINT8 IshGpGpioPadTermination[8]; - -/** Offset 0x0274 - ISH UART Rx Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination - respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1 - Rx, and so on. -**/ - UINT8 IshUartRxPadTermination[3]; - -/** Offset 0x0277 - ISH UART Tx Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination - respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1 - Tx, and so on. -**/ - UINT8 IshUartTxPadTermination[3]; - -/** Offset 0x027A - ISH UART Rts Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination - respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1 - Rts, and so on. -**/ - UINT8 IshUartRtsPadTermination[3]; - -/** Offset 0x027D - ISH UART Rts Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination - respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1 - Cts, and so on. -**/ - UINT8 IshUartCtsPadTermination[3]; - -/** Offset 0x0280 - ISH I2C SDA Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination - respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda, - and so on. -**/ - UINT8 IshI2cSdaPadTermination[3]; - -/** Offset 0x0283 - ISH I2C SCL Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination - respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl, - and so on. -**/ - UINT8 IshI2cSclPadTermination[3]; - -/** Offset 0x0286 - ISH SPI MOSI Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination - respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1 - Mosi, and so on. -**/ - UINT8 IshSpiMosiPadTermination[2]; - -/** Offset 0x0288 - ISH SPI MISO Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination - respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1 - Miso, and so on. -**/ - UINT8 IshSpiMisoPadTermination[2]; - -/** Offset 0x028A - ISH SPI CLK Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination - respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk, - and so on. -**/ - UINT8 IshSpiClkPadTermination[2]; - -/** Offset 0x028C - ISH SPI CS#N Pad termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination - respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1 - Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3 -**/ - UINT8 IshSpiCsPadTermination[4]; - -/** Offset 0x0290 - Enable PCH ISH SPI Cs#N pins assigned - Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs - number: 0-1 -**/ - UINT8 PchIshSpiCsEnable[4]; - -/** Offset 0x0294 - USB Per Port HS Preemphasis Bias - USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, - 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. -**/ - UINT8 Usb2PhyPetxiset[16]; - -/** Offset 0x02A4 - USB Per Port HS Transmitter Bias - USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, - 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. -**/ - UINT8 Usb2PhyTxiset[16]; - -/** Offset 0x02B4 - USB Per Port HS Transmitter Emphasis - USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, - 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. -**/ - UINT8 Usb2PhyPredeemp[16]; - -/** Offset 0x02C4 - USB Per Port Half Bit Pre-emphasis - USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. - One byte for each port. -**/ - UINT8 Usb2PhyPehalfbit[16]; - -/** Offset 0x02D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value - in arrary can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxDeEmphEnable[10]; - -/** Offset 0x02DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], - <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. -**/ - UINT8 Usb3HsioTxDeEmph[10]; - -/** Offset 0x02E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value - in arrary can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxDownscaleAmpEnable[10]; - -/** Offset 0x02F2 - USB 3.0 TX Output Downscale Amplitude Adjustment - USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default - = 00h</b>. One byte for each port. -**/ - UINT8 Usb3HsioTxDownscaleAmp[10]; - -/** Offset 0x02FC -**/ - UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10]; - -/** Offset 0x0306 -**/ - UINT8 PchUsb3HsioFilterSelNEnable[10]; - -/** Offset 0x0310 -**/ - UINT8 PchUsb3HsioFilterSelPEnable[10]; - -/** Offset 0x031A -**/ - UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10]; - -/** Offset 0x0324 -**/ - UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10]; - -/** Offset 0x032E -**/ - UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10]; - -/** Offset 0x0338 -**/ - UINT8 PchUsb3HsioFilterSelN[10]; - -/** Offset 0x0342 -**/ - UINT8 PchUsb3HsioFilterSelP[10]; - -/** Offset 0x034C - Enable LAN - Enable/disable LAN controller. - $EN_DIS -**/ - UINT8 PchLanEnable; - -/** Offset 0x034D - Enable PCH TSN - Enable/disable TSN on the PCH. - $EN_DIS -**/ - UINT8 PchTsnEnable; - -/** Offset 0x034E - TSN Link Speed - Set TSN Link Speed. - 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps -**/ - UINT8 PchTsnLinkSpeed; - -/** Offset 0x034F -**/ - UINT8 UnusedUpdSpace5; - -/** Offset 0x0350 - PCH TSN0 MAC Address High Bits - Set TSN0 MAC Address High. -**/ - UINT32 PchTsn0MacAddressHigh; - -/** Offset 0x0354 - PCH TSN0 MAC Address Low Bits - Set TSN0 MAC Address Low. -**/ - UINT32 PchTsn0MacAddressLow; - -/** Offset 0x0358 - PCIe PTM enable/disable - Enable/disable Precision Time Measurement for PCIE Root Ports. -**/ - UINT8 PciePtm[24]; - -/** Offset 0x0370 - PCIe DPC enable/disable - Enable/disable Downstream Port Containment for PCIE Root Ports. -**/ - UINT8 PcieDpc[24]; - -/** Offset 0x0388 - PCIe DPC extensions enable/disable - Enable/disable Downstream Port Containment Extensions for PCIE Root Ports. -**/ - UINT8 PcieEdpc[24]; - -/** Offset 0x03A0 - USB PDO Programming - Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming - during later phase. 1: enable, 0: disable - $EN_DIS -**/ - UINT8 UsbPdoProgramming; - -/** Offset 0x03A1 -**/ - UINT8 UnusedUpdSpace6[3]; - -/** Offset 0x03A4 - Power button debounce configuration - Debounce time for PWRBTN in microseconds. For values not supported by HW, they will - be rounded down to closest supported on. 0: disable, 250-1024000us: supported range -**/ - UINT32 PmcPowerButtonDebounce; - -/** Offset 0x03A8 - PCH eSPI Master and Slave BME enabled - PCH eSPI Master and Slave BME enabled - $EN_DIS -**/ - UINT8 PchEspiBmeMasterSlaveEnabled; - -/** Offset 0x03A9 - PCH SATA use RST Legacy OROM - Use PCH SATA RST Legacy OROM when CSM is Enabled - $EN_DIS -**/ - UINT8 SataRstLegacyOrom; - -/** Offset 0x03AA - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states - Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 -**/ - UINT8 PchFivrExtV1p05RailEnabledStates; - -/** Offset 0x03AB - Mask to enable the platform configuration of external V1p05 VR rail - External V1P05 Rail Supported Configuration -**/ - UINT8 PchFivrExtV1p05RailSupportedVoltageStates; - -/** Offset 0x03AC - External V1P05 Voltage Value that will be used in S0i2/S0i3 states - Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) -**/ - UINT16 PchFivrExtV1p05RailVoltage; - -/** Offset 0x03AE - External V1P05 Icc Max Value - Granularity of this setting is 1mA and maximal possible value is 200mA -**/ - UINT8 PchFivrExtV1p05RailIccMax; - -/** Offset 0x03AF - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states - Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 -**/ - UINT8 PchFivrExtVnnRailEnabledStates; - -/** Offset 0x03B0 - Mask to enable the platform configuration of external Vnn VR rail - External Vnn Rail Supported Configuration -**/ - UINT8 PchFivrExtVnnRailSupportedVoltageStates; - -/** Offset 0x03B1 -**/ - UINT8 UnusedUpdSpace7; - -/** Offset 0x03B2 - External Vnn Voltage Value that will be used in S0ix/Sx states - Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420 -**/ - UINT16 PchFivrExtVnnRailVoltage; - -/** Offset 0x03B4 - External Vnn Icc Max Value that will be used in S0ix/Sx states - Granularity of this setting is 1mA and maximal possible value is 200mA -**/ - UINT8 PchFivrExtVnnRailIccMax; - -/** Offset 0x03B5 - Mask to enable the usage of external Vnn VR rail in Sx states - Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in - Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5 -**/ - UINT8 PchFivrExtVnnRailSxEnabledStates; - -/** Offset 0x03B6 - External Vnn Voltage Value that will be used in Sx states - Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments - (0=0mV, 1=2.5mV, 2=5mV...) -**/ - UINT16 PchFivrExtVnnRailSxVoltage; - -/** Offset 0x03B8 - External Vnn Icc Max Value that will be used in Sx states - Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting - is 1mA and maximal possible value is 200mA -**/ - UINT8 PchFivrExtVnnRailSxIccMax; - -/** Offset 0x03B9 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage - This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX - to low current mode voltage. -**/ - UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime; - -/** Offset 0x03BA - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage - This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX - to retention mode voltage. -**/ - UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime; - -/** Offset 0x03BB - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage - This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX - to retention mode voltage. -**/ - UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime; - -/** Offset 0x03BC - Transition time in microseconds from Off (0V) to High Current Mode Voltage - This field has 1us resolution. When value is 0 Transition to 0V is disabled. -**/ - UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; - -/** Offset 0x03BE -**/ - UINT8 UnusedUpdSpace8[2]; - -/** Offset 0x03C0 - Trace Hub Memory Base - If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate - trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub - memory is configured properly. -**/ - UINT32 TraceHubMemBase; - -/** Offset 0x03C4 - PMC Debug Message Enable - When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW - will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix - $EN_DIS -**/ - UINT8 PmcDbgMsgEn; - -/** Offset 0x03C5 -**/ - UINT8 UnusedUpdSpace9[3]; - -/** Offset 0x03C8 - Pointer of ChipsetInit Binary - ChipsetInit Binary Pointer. -**/ - UINT32 ChipsetInitBinPtr; - -/** Offset 0x03CC - Length of ChipsetInit Binary - ChipsetInit Binary Length. -**/ - UINT32 ChipsetInitBinLen; - -/** Offset 0x03D0 - FIVR Dynamic Power Management - Enable/Disable FIVR Dynamic Power Management. - $EN_DIS -**/ - UINT8 PchFivrDynPm; - -/** Offset 0x03D1 -**/ - UINT8 UnusedUpdSpace10; - -/** Offset 0x03D2 - External V1P05 Icc Max Value - Granularity of this setting is 1mA and maximal possible value is 500mA -**/ - UINT16 PchFivrExtV1p05RailIccMaximum; - -/** Offset 0x03D4 - External Vnn Icc Max Value that will be used in S0ix/Sx states - Granularity of this setting is 1mA and maximal possible value is 500mA -**/ - UINT16 PchFivrExtVnnRailIccMaximum; - -/** Offset 0x03D6 - External Vnn Icc Max Value that will be used in Sx states - Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting - is 1mA and maximal possible value is 500mA -**/ - UINT16 PchFivrExtVnnRailSxIccMaximum; - -/** Offset 0x03D8 - PCH eSPI Link Configuration Lock (SBLCL) - Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI slaves - addresseses from range 0x0 - 0x7FF - $EN_DIS -**/ - UINT8 PchEspiLockLinkConfiguration; - -/** Offset 0x03D9 - Extented BIOS Direct Read Decode enable - Enable/Disable access to bigger than 16MB BIOS Region through Direct Memory Reads. - 0: disabled (default), 1: enabled - $EN_DIS -**/ - UINT8 PchSpiExtendedBiosDecodeRangeEnable; - -/** Offset 0x03DA - Enforce Enhanced Debug Mode - Determine if ME should enter Enhanced Debug Mode. <b>0: disable</b>, 1: enable - $EN_DIS -**/ - UINT8 EnforceEDebugMode; - -/** Offset 0x03DB - PchPostMemRsvd - Reserved for PCH Post-Mem - $EN_DIS -**/ - UINT8 PchPostMemRsvd[1]; - -/** Offset 0x03DC - Extended BIOS Direct Read Decode Range base - Bits of 31:16 of a memory address that'll be a base for Extended BIOS Direct Read Decode. -**/ - UINT32 PchSpiExtendedBiosDecodeRangeBase; - -/** Offset 0x03E0 - Extended BIOS Direct Read Decode Range limit - Bits of 31:16 of a memory address that'll be a limit for Extended BIOS Direct Read Decode. -**/ - UINT32 PchSpiExtendedBiosDecodeRangeLimit; - -/** Offset 0x03E4 - CNVi Configuration - This option allows for automatic detection of Connectivity Solution. [Auto Detection] - assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. - 0:Disable, 1:Auto -**/ - UINT8 CnviMode; - -/** Offset 0x03E5 - CNVi BT Core - Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE - $EN_DIS -**/ - UINT8 CnviBtCore; - -/** Offset 0x03E6 - CNVi BT Audio Offload - Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE - $EN_DIS -**/ - UINT8 CnviBtAudioOffload; - -/** Offset 0x03E7 -**/ - UINT8 UnusedUpdSpace11; - -/** Offset 0x03E8 - CNVi RF_RESET pin muxing - Select CNVi RF_RESET# pin depending on board routing. TGP-LP: GPP_A8 = 0x2942E408(default) - or GPP_F4 = 0x194CE404. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. -**/ - UINT32 CnviRfResetPinMux; - -/** Offset 0x03EC - CNVi CLKREQ pin muxing - Select CNVi CLKREQ pin depending on board routing. TGP-LP: GPP_A9 = 0x3942E609(default) - or GPP_F5 = 0x394CE605. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in - GpioPins*.h. -**/ - UINT32 CnviClkreqPinMux; - -/** Offset 0x03F0 - Enable Host C10 reporting through eSPI - Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire. - $EN_DIS -**/ - UINT8 PchEspiHostC10ReportEnable; - -/** Offset 0x03F1 - PCH USB2 PHY Power Gating enable - 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY - Sus Well PG - $EN_DIS -**/ - UINT8 PmcUsb2PhySusPgEnable; - -/** Offset 0x03F2 - PCH USB OverCurrent mapping enable - 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin - mapping allow for NOA usage of OC pins - $EN_DIS -**/ - UINT8 PchUsbOverCurrentEnable; - -/** Offset 0x03F3 - Espi Lgmr Memory Range decode - This option enables or disables espi lgmr - $EN_DIS -**/ - UINT8 PchEspiLgmrEnable; - -/** Offset 0x03F4 - External V1P05 Control Ramp Timer value - Hold off time to be used when changing the v1p05_ctrl for external bypass value in us -**/ - UINT8 PchFivrExtV1p05RailCtrlRampTmr; - -/** Offset 0x03F5 - External VNN Control Ramp Timer value - Hold off time to be used when changing the vnn_ctrl for external bypass value in us -**/ - UINT8 PchFivrExtVnnRailCtrlRampTmr; - -/** Offset 0x03F6 - Set SATA DEVSLP GPIO Reset Config - Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset, - 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte - for each port, byte0 for port0, byte1 for port1, and so on. -**/ - UINT8 SataPortsDevSlpResetConfig[8]; - -/** Offset 0x03FE - HECI3 state - The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. - DEPRECATED 0: disable, 1: enable - $EN_DIS -**/ - UINT8 Heci3Enabled; - -/** Offset 0x03FF - PCHHOT# pin - Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchHotEnable; - -/** Offset 0x0400 - SATA LED - SATA LED indicating SATA controller activity. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 SataLedEnable; - -/** Offset 0x0401 - VRAlert# Pin - When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling - to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmVrAlert; - -/** Offset 0x0402 - AMT Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. - $EN_DIS -**/ - UINT8 AmtEnabled; - -/** Offset 0x0403 - WatchDog Timer Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting - is invalid if AmtEnabled is 0. - $EN_DIS -**/ - UINT8 WatchDogEnabled; - -/** Offset 0x0404 - Manageability Mode set by Mebx - Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. - $EN_DIS -**/ - UINT8 ManageabilityMode; - -/** Offset 0x0405 - PET Progress - Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive - PET Events. Setting is invalid if AmtEnabled is 0. - $EN_DIS -**/ - UINT8 FwProgress; - -/** Offset 0x0406 - SOL Switch - Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. - Setting is invalid if AmtEnabled is 0. - $EN_DIS -**/ - UINT8 AmtSolEnabled; - -/** Offset 0x0407 -**/ - UINT8 UnusedUpdSpace12; - -/** Offset 0x0408 - OS Timer - 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. -**/ - UINT16 WatchDogTimerOs; - -/** Offset 0x040A - BIOS Timer - 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. -**/ - UINT16 WatchDogTimerBios; - -/** Offset 0x040C - Remote Assistance Trigger Availablilty - Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx. - $EN_DIS -**/ - UINT8 RemoteAssistance; - -/** Offset 0x040D - KVM Switch - Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting - is invalid if AmtEnabled is 0. - $EN_DIS -**/ - UINT8 AmtKvmEnabled; - -/** Offset 0x040E - Force MEBX execution - Enable/Disable. 0: Disable, 1: enable, Force MEBX execution. - $EN_DIS -**/ - UINT8 ForcMebxSyncUp; - -/** Offset 0x040F - PCH PCIe root port connection type - 0: built-in device, 1:slot -**/ - UINT8 PcieRpSlotImplemented[24]; - -/** Offset 0x0427 - PCIE RP Access Control Services Extended Capability - Enable/Disable PCIE RP Access Control Services Extended Capability -**/ - UINT8 PcieRpAcsEnabled[24]; - -/** Offset 0x043F - PCIE RP Clock Power Management - Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal - can still be controlled by L1 PM substates mechanism -**/ - UINT8 PcieRpEnableCpm[24]; - -/** Offset 0x0457 -**/ - UINT8 UnusedUpdSpace13[1]; - -/** Offset 0x0458 - PCIE RP Detect Timeout Ms - The number of milliseconds within 0~65535 in reference code will wait for link to - exit Detect state for enabled ports before assuming there is no device and potentially - disabling the port. -**/ - UINT16 PcieRpDetectTimeoutMs[24]; - -/** Offset 0x0488 - ModPHY SUS Power Domain Dynamic Gating - Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on - PCH-H. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PmcModPhySusPgEnable; - -/** Offset 0x0489 - V1p05-PHY supply external FET control - Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY - supply. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PmcV1p05PhyExtFetControlEn; - -/** Offset 0x048A - V1p05-IS supply external FET control - Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS - supply. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PmcV1p05IsExtFetControlEn; - -/** Offset 0x048B - Enable/Disable PavpEnable - Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable - $EN_DIS -**/ - UINT8 PavpEnable; - -/** Offset 0x048C - CdClock Frequency selection - 0 (Default) Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: - 312 Mhz, 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz - 0xFF: Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: 312 Mhz, - 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz -**/ - UINT8 CdClock; - -/** Offset 0x048D - Enable/Disable PeiGraphicsPeimInit - <b>Enable(Default):</b> FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB. - Disable: FSP will NOT initialize the framebuffer. - $EN_DIS -**/ - UINT8 PeiGraphicsPeimInit; - -/** Offset 0x048E - Enable D3 Hot in TCSS - This policy will enable/disable D3 hot support in IOM - $EN_DIS -**/ - UINT8 D3HotEnable; - -/** Offset 0x048F - Enable or disable GNA device - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 GnaEnable; - -/** Offset 0x0490 - TypeC port GPIO setting - GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined - in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Tgl - = TigerLake) -**/ - UINT32 IomTypeCPortPadCfg[8]; - -/** Offset 0x04B0 - CPU USB3 Port Over Current Pin - Describe the specific over current pin number of USBC Port N. -**/ - UINT8 CpuUsb3OverCurrentPin[8]; - -/** Offset 0x04B8 - Enable D3 Cold in TCSS - This policy will enable/disable D3 cold support in IOM - $EN_DIS -**/ - UINT8 D3ColdEnable; - -/** Offset 0x04B9 - Enable/Disable PCIe tunneling for USB4 - Enable/Disable PCIe tunneling for USB4, default is enable - $EN_DIS -**/ - UINT8 ITbtPcieTunnelingForUsb4; - -/** Offset 0x04BA - Enable/Disable SkipFspGop - Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver - $EN_DIS -**/ - UINT8 SkipFspGop; - -/** Offset 0x04BB - TC State in TCSS - This TC C-State Limit in IOM -**/ - UINT8 TcCstateLimit; - -/** Offset 0x04BC - Disable TC code On USB Connect - Enable: Unsupported TC cold capability on Usb Connected, Disable(default): Supported - TC cold On Usb Connected - $EN_DIS -**/ - UINT8 DisableTccoldOnUsbConnected; - -/** Offset 0x04BD - Set Iom stay in TC cold seconds in TCSS - Set Iom stay in TC cold seconds in IOM -**/ - UINT8 IomStayInTCColdeSeconds; - -/** Offset 0x04BE - Set Iom before entering TC cold seconds in TCSS - Set Iom before entering TC cold seconds in IOM -**/ - UINT8 IomBeforeEnteringTCCodeSeconds; - -/** Offset 0x04BF - SaPostMemRsvd - Reserved for PCH Post-Mem - $EN_DIS -**/ - UINT8 SaPostMemRsvd[2]; - -/** Offset 0x04C1 - Enable VMD controller - Enable/disable to VMD controller.0: Disable(Default); 1: Enable - $EN_DIS -**/ - UINT8 VmdEnable; - -/** Offset 0x04C2 - Enable VMD portA Support - Enable/disable to VMD portA Support. - $EN_DIS -**/ - UINT8 VmdPortA; - -/** Offset 0x04C3 - Enable VMD portB Support - Enable/disable to VMD portB Support. - $EN_DIS -**/ - UINT8 VmdPortB; - -/** Offset 0x04C4 - Enable VMD portC Support - Enable/disable to VMD portC Support. - $EN_DIS -**/ - UINT8 VmdPortC; - -/** Offset 0x04C5 - Enable VMD portD Support - Enable/disable to VMD portD Support. - $EN_DIS -**/ - UINT8 VmdPortD; - -/** Offset 0x04C6 - VMD Config Bar size - Set The VMD Config Bar Size. -**/ - UINT8 VmdCfgBarSize; - -/** Offset 0x04C7 - VMD Config Bar Attributes - 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default) - 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH -**/ - UINT8 VmdCfgBarAttr; - -/** Offset 0x04C8 - VMD Mem Bar1 size - Set The VMD Mem Bar1 Size. -**/ - UINT8 VmdMemBarSize1; - -/** Offset 0x04C9 - VMD Mem Bar1 Attributes - 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH - 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH -**/ - UINT8 VmdMemBar1Attr; - -/** Offset 0x04CA - VMD Mem Bar2 size - Set The VMD Mem Bar2 Size. -**/ - UINT8 VmdMemBarSize2; - -/** Offset 0x04CB - VMD Mem Bar2 Attributes - 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH - 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH -**/ - UINT8 VmdMemBar2Attr; - -/** Offset 0x04CC - Enable/Disable PMC-PD Solution - This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution - $EN_DIS -**/ - UINT8 PmcPdEnable; - -/** Offset 0x04CD -**/ - UINT8 UnusedUpdSpace14; - -/** Offset 0x04CE - TCSS Aux Orientation Override Enable - Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides -**/ - UINT16 TcssAuxOri; - -/** Offset 0x04D0 - TCSS HSL Orientation Override Enable - Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides -**/ - UINT16 TcssHslOri; - -/** Offset 0x04D2 - USB override in IOM - This policy will enable/disable USB Connect override in IOM - $EN_DIS -**/ - UINT8 UsbOverride; - -/** Offset 0x04D3 - TCSS USB Port Enable - Bits 0, 1, ... max Type C port control enables -**/ - UINT8 UsbTcPortEn; - -/** Offset 0x04D4 - ITBT Root Port Enable - ITBT Root Port Enable, 0:Disable, 1:Enable - 0:Disable, 1:Enable -**/ - UINT8 ITbtPcieRootPortEn[4]; - -/** Offset 0x04D8 - ITBTForcePowerOn Timeout value - ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000. - 100 = 100 ms. -**/ - UINT16 ITbtForcePowerOnTimeoutInMs; - -/** Offset 0x04DA - ITbtConnectTopology Timeout value - ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range - is 0-10000. 100 = 100 ms. -**/ - UINT16 ITbtConnectTopologyTimeoutInMs; - -/** Offset 0x04DC - VCCST request for IOM - This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5 - $EN_DIS -**/ - UINT8 VccSt; - -/** Offset 0x04DD - TCSS Usb3 Compliance Mode Enable - Used by IOM FW to skip powering down the PHY at the end of disconnect flow - $EN_DIS -**/ - UINT8 Usb3ComplModeEnable; - -/** Offset 0x04DE - ITBT DMA LTR - TCSS DMA1, DMA2 LTR value -**/ - UINT16 ITbtDmaLtr[2]; - -/** Offset 0x04E2 - Enable/Disable CrashLog - Deprecated. Move to PreMem - $EN_DIS -**/ - UINT8 DeprecatedCpuCrashLogEnable; - -/** Offset 0x04E3 - Enable/Disable PTM - This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports - $EN_DIS -**/ - UINT8 PtmEnabled[4]; - -/** Offset 0x04E7 - PCIE RP Ltr Enable - Latency Tolerance Reporting Mechanism. -**/ - UINT8 SaPcieItbtRpLtrEnable[4]; - -/** Offset 0x04EB - PCIE RP Snoop Latency Override Mode - Latency Tolerance Reporting, Snoop Latency Override Mode. -**/ - UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4]; - -/** Offset 0x04EF - PCIE RP Snoop Latency Override Multiplier - Latency Tolerance Reporting, Snoop Latency Override Multiplier. -**/ - UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4]; - -/** Offset 0x04F3 -**/ - UINT8 UnusedUpdSpace15[1]; - -/** Offset 0x04F4 - PCIE RP Snoop Latency Override Value - Latency Tolerance Reporting, Snoop Latency Override Value. -**/ - UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4]; - -/** Offset 0x04FC - PCIE RP Non Snoop Latency Override Mode - Latency Tolerance Reporting, Non-Snoop Latency Override Mode. -**/ - UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4]; - -/** Offset 0x0500 - PCIE RP Non Snoop Latency Override Multiplier - Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. -**/ - UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4]; - -/** Offset 0x0504 - PCIE RP Non Snoop Latency Override Value - Latency Tolerance Reporting, Non-Snoop Latency Override Value. -**/ - UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4]; - -/** Offset 0x050C - Force LTR Override - Force LTR Override. -**/ - UINT8 SaPcieItbtRpForceLtrOverride[4]; - -/** Offset 0x0510 - PCIE RP Ltr Config Lock - 0: Disable; 1: Enable. -**/ - UINT8 SaPcieItbtRpLtrConfigLock[4]; - -/** Offset 0x0514 - Advanced Encryption Standard (AES) feature - Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable - $EN_DIS -**/ - UINT8 AesEnable; - -/** Offset 0x0515 - Power State 3 enable/disable - PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>. - For all VR Indexes -**/ - UINT8 Psi3Enable[5]; - -/** Offset 0x051A - Power State 4 enable/disable - PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For - all VR Indexes -**/ - UINT8 Psi4Enable[5]; - -/** Offset 0x051F -**/ - UINT8 UnusedUpdSpace16[1]; - -/** Offset 0x0520 - Imon slope correction - PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. - Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes -**/ - UINT16 ImonSlope[5]; - -/** Offset 0x052A - Imon offset correction - PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. - Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b> -**/ - UINT16 ImonOffset[5]; - -/** Offset 0x0534 - Enable/Disable BIOS configuration of VR - Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes -**/ - UINT8 VrConfigEnable[5]; - -/** Offset 0x0539 - Thermal Design Current enable/disable - PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1: - Enable.For all VR Indexes -**/ - UINT8 TdcEnable[5]; - -/** Offset 0x053E - Thermal Design Current time window - PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. - DEPRECATED. Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - - 6ms , 7 - 7ms , 8 - 8ms , 10 - 10ms.For all VR Index -**/ - UINT8 TdcTimeWindow[5]; - -/** Offset 0x0543 - Thermal Design Current Lock - PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For - all VR Indexes -**/ - UINT8 TdcLock[5]; - -/** Offset 0x0548 - Platform Psys slope correction - PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in - 1/100 increment values. Range is 0-200. 125 = 1.25 -**/ - UINT8 PsysSlope; - -/** Offset 0x0549 -**/ - UINT8 PsysOffset; - -/** Offset 0x054A - Acoustic Noise Mitigation feature - Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled - $EN_DIS -**/ - UINT8 AcousticNoiseMitigation; - -/** Offset 0x054B - Disable Fast Slew Rate for Deep Package C States for VR domains - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisable[5]; - -/** Offset 0x0550 - Slew Rate configuration for Deep Package C States for VR domains - Slew Rate configuration for Deep Package C States for VR domains based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRate[5]; - -/** Offset 0x0555 - Enable multi phases silicon initialization - A switch to determine MultiPhaseSiInit will be executed or not - $EN_DIS -**/ - UINT8 EnableMultiPhaseSiliconInit; - -/** Offset 0x0556 - Thermal Design Current current limit - PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. - Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes -**/ - UINT16 TdcCurrentLimit[5]; - -/** Offset 0x0560 - AcLoadline - PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is - 0-6249. <b>Intel Recommended Defaults vary by domain and SKU. -**/ - UINT16 AcLoadline[5]; - -/** Offset 0x056A - DcLoadline - PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is - 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b> -**/ - UINT16 DcLoadline[5]; - -/** Offset 0x0574 - Power State 1 Threshold current - PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi1Threshold[5]; - -/** Offset 0x057E - Power State 2 Threshold current - PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi2Threshold[5]; - -/** Offset 0x0588 - Power State 3 Threshold current - PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi3Threshold[5]; - -/** Offset 0x0592 - Icc Max limit - PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A -**/ - UINT16 IccMax[5]; - -/** Offset 0x059C - VR Voltage Limit - PCODE MMIO Mailbox: VR Voltage Limit. DEPRECATED, Range is 0-7999mV. -**/ - UINT16 VrVoltageLimit[5]; - -/** Offset 0x05A6 - Enable VR specific mailbox command - VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A - VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific - command sent for PS4 exit issue. 11b - Reserved. - $EN_DIS -**/ - UINT8 SendVrMbxCmd; - -/** Offset 0x05A7 - Reserved - Reserved -**/ - UINT8 Reserved2; - -/** Offset 0x05A8 - Enable or Disable TXT - Enable or Disable TXT; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 TxtEnable; - -/** Offset 0x05A9 - Skip Multi-Processor Initialization - When this is skipped, boot loader must initialize processors before SilicionInit - API. </b>0: Initialize; <b>1: Skip - $EN_DIS -**/ - UINT8 SkipMpInit; - -/** Offset 0x05AA - FIVR RFI Frequency - PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0: - Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; - 0-1535 (Up to 153.5MHz) for 19MHz clock. -**/ - UINT16 FivrRfiFrequency; - -/** Offset 0x05AC - FIVR RFI Spread Spectrum - Set the Spread Spectrum Range. <b>1.5%</b>; Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%, - 6%. Each Range is translated to an encoded value for FIVR register. 0.5% = 0, 1% - = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44. -**/ - UINT8 FivrSpreadSpectrum; - -/** Offset 0x05AD -**/ - UINT8 UnusedUpdSpace17[3]; - -/** Offset 0x05B0 - CpuBistData - Pointer CPU BIST Data -**/ - UINT32 CpuBistData; - -/** Offset 0x05B4 - CpuMpPpi - <b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. - If not NULL, FSP will use the boot loader's implementation of multiprocessing. - See section 5.1.4 of the FSP Integration Guide for more details. -**/ - UINT32 CpuMpPpi; - -/** Offset 0x05B8 - CpuMpHob - <b>@deprecated</b> This is not needed in current version of FSP. -**/ - UINT32 CpuMpHob; - -/** Offset 0x05BC - RFI Mitigation - Enable or Disable RFI Mitigation. <b>0: Disable - DCM is the IO_N default</b>; 1: - Enable - Enable IO_N DCM/CCM switching as RFI mitigation. - $EN_DIS -**/ - UINT8 RfiMitigation; - -/** Offset 0x05BD - FIVR RFI Spread Spectrum Enable or disable - Enable or Disable FIVR RFI Spread Spectrum. 0: Disable ; <b> 1: Enable </b> -**/ - UINT8 FivrSpectrumEnable; - -/** Offset 0x05BE - Pre Wake Randomization time - PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum pre-wake - randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation - is enabled. Range 0-255 <b>0</b>. -**/ - UINT8 PreWake; - -/** Offset 0x05BF - Ramp Up Randomization time - PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Up - randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation - is enabled.Range 0-255 <b>0</b>. -**/ - UINT8 RampUp; - -/** Offset 0x05C0 - Ramp Down Randomization time - PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Down - randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation - is enabled.Range 0-255 <b>0</b>. -**/ - UINT8 RampDown; - -/** Offset 0x05C1 -**/ - UINT8 CpuPostMemRsvd[11]; - -/** Offset 0x05CC - PpinSupport to view Protected Processor Inventory Number - Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this - flag is set) for PPIN Support - 0: Disable, 1: Enable, 2: Auto -**/ - UINT8 PpinSupport; - -/** Offset 0x05CD - Enable or Disable Minimum Voltage Override - Enable or disable Minimum Voltage overrides ; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 EnableMinVoltageOverride; - -/** Offset 0x05CE - Min Voltage for Runtime - PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride - = 1. Range 0 to 1999mV. <b> 0: 0mV </b> -**/ - UINT16 MinVoltageRuntime; - -/** Offset 0x05D0 - Base of memory region allocated for Processor Trace - Base address of memory region allocated for Processor Trace. Processor Trace requires - 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> -**/ - UINT64 ProcessorTraceMemBase; - -/** Offset 0x05D8 - Memory region allocation for Processor Trace - Length in bytes of memory region allocated for Processor Trace. Processor Trace - requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> -**/ - UINT32 ProcessorTraceMemLength; - -/** Offset 0x05DC - Min Voltage for C8 - PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride = - 1. Range 0 to 1999mV. <b> 0: 0mV </b> -**/ - UINT16 MinVoltageC8; - -/** Offset 0x05DE - Platform Psys offset correction - PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/1000, - Range 0-63999. For an offset of 25.348, enter 25348. -**/ - UINT16 PsysOffset1; - -/** Offset 0x05E0 - Smbios Type4 Max Speed Override - Provide the option for platform to override the MaxSpeed field of Smbios Type 4. - If this value is not zero, it dominates the field. -**/ - UINT16 SmbiosType4MaxSpeedOverride; - -/** Offset 0x05E2 - AvxDisable - Enable or Disable AVX Support. - 0: Enable, 1: Disable -**/ - UINT8 AvxDisable; - -/** Offset 0x05E3 - Avx3Disable - Enable or Disable AVX3 Support - 0: Enable, 1: Disable -**/ - UINT8 Avx3Disable; - -/** Offset 0x05E4 - ReservedCpuPostMemProduction - Reserved for CPU Post-Mem Production - $EN_DIS -**/ - UINT8 ReservedCpuPostMemProduction[4]; - -/** Offset 0x05E8 - Enable Power Optimizer - Enable DMI Power Optimizer on PCH side. - $EN_DIS -**/ - UINT8 PchPwrOptEnable; - -/** Offset 0x05E9 - PCH Flash Protection Ranges Write Enble - Write or erase is blocked by hardware. -**/ - UINT8 PchWriteProtectionEnable[5]; - -/** Offset 0x05EE - PCH Flash Protection Ranges Read Enble - Read is blocked by hardware. -**/ - UINT8 PchReadProtectionEnable[5]; - -/** Offset 0x05F3 -**/ - UINT8 UnusedUpdSpace18[1]; - -/** Offset 0x05F4 - PCH Protect Range Limit - Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for - limit comparison. -**/ - UINT16 PchProtectedRangeLimit[5]; - -/** Offset 0x05FE - PCH Protect Range Base - Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. -**/ - UINT16 PchProtectedRangeBase[5]; - -/** Offset 0x0608 - Enable Pme - Enable Azalia wake-on-ring. - $EN_DIS -**/ - UINT8 PchHdaPme; - -/** Offset 0x0609 - HD Audio Link Frequency - HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. - 0: 6MHz, 1: 12MHz, 2: 24MHz -**/ - UINT8 PchHdaLinkFrequency; - -/** Offset 0x060A - PchPostMemRsvd - Reserved for PCH Post-Mem - $EN_DIS -**/ - UINT8 PchPostMemRsvd4[3]; - -/** Offset 0x060D - Enable PCH ISH SPI Cs0 pins assigned - Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable. -**/ - UINT8 PchIshSpiCs0Enable[1]; - -/** Offset 0x060E - Enable PCH Io Apic Entry 24-119 - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIoApicEntry24_119; - -/** Offset 0x060F - PCH Io Apic ID - This member determines IOAPIC ID. Default is 0x02. -**/ - UINT8 PchIoApicId; - -/** Offset 0x0610 - Enable PCH ISH SPI pins assigned - Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable. -**/ - UINT8 PchIshSpiEnable[1]; - -/** Offset 0x0611 - Enable PCH ISH UART pins assigned - Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable. -**/ - UINT8 PchIshUartEnable[2]; - -/** Offset 0x0613 - Enable PCH ISH I2C pins assigned - Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. -**/ - UINT8 PchIshI2cEnable[3]; - -/** Offset 0x0616 - Enable PCH ISH GP pins assigned - Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable. -**/ - UINT8 PchIshGpEnable[8]; - -/** Offset 0x061E - PCH ISH PDT Unlock Msg - 0: False; 1: True. - $EN_DIS -**/ - UINT8 PchIshPdtUnlock; - -/** Offset 0x061F - Enable PCH Lan LTR capabilty of PCH internal LAN - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchLanLtrEnable; - -/** Offset 0x0620 - Enable LOCKDOWN BIOS LOCK - Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region - protection. - $EN_DIS -**/ - UINT8 PchLockDownBiosLock; - -/** Offset 0x0621 - PCH Compatibility Revision ID - This member describes whether or not the CRID feature of PCH should be enabled. - $EN_DIS -**/ - UINT8 PchCrid; - -/** Offset 0x0622 - RTC BIOS Interface Lock - Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed. - $EN_DIS -**/ - UINT8 RtcBiosInterfaceLock; - -/** Offset 0x0623 - RTC Cmos Memory Lock - Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper - and and lower 128-byte bank of RTC RAM. - $EN_DIS -**/ - UINT8 RtcMemoryLock; - -/** Offset 0x0624 - Enable PCIE RP HotPlug - Indicate whether the root port is hot plug available. -**/ - UINT8 PcieRpHotPlug[24]; - -/** Offset 0x063C - Enable PCIE RP Pm Sci - Indicate whether the root port power manager SCI is enabled. -**/ - UINT8 PcieRpPmSci[24]; - -/** Offset 0x0654 - Enable PCIE RP Transmitter Half Swing - Indicate whether the Transmitter Half Swing is enabled. -**/ - UINT8 PcieRpTransmitterHalfSwing[24]; - -/** Offset 0x066C - Enable PCIE RP Clk Req Detect - Probe CLKREQ# signal before enabling CLKREQ# based power management. -**/ - UINT8 PcieRpClkReqDetect[24]; - -/** Offset 0x0684 - PCIE RP Advanced Error Report - Indicate whether the Advanced Error Reporting is enabled. -**/ - UINT8 PcieRpAdvancedErrorReporting[24]; - -/** Offset 0x069C - PCIE RP Unsupported Request Report - Indicate whether the Unsupported Request Report is enabled. -**/ - UINT8 PcieRpUnsupportedRequestReport[24]; - -/** Offset 0x06B4 - PCIE RP Fatal Error Report - Indicate whether the Fatal Error Report is enabled. -**/ - UINT8 PcieRpFatalErrorReport[24]; - -/** Offset 0x06CC - PCIE RP No Fatal Error Report - Indicate whether the No Fatal Error Report is enabled. -**/ - UINT8 PcieRpNoFatalErrorReport[24]; - -/** Offset 0x06E4 - PCIE RP Correctable Error Report - Indicate whether the Correctable Error Report is enabled. -**/ - UINT8 PcieRpCorrectableErrorReport[24]; - -/** Offset 0x06FC - PCIE RP System Error On Fatal Error - Indicate whether the System Error on Fatal Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnFatalError[24]; - -/** Offset 0x0714 - PCIE RP System Error On Non Fatal Error - Indicate whether the System Error on Non Fatal Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnNonFatalError[24]; - -/** Offset 0x072C - PCIE RP System Error On Correctable Error - Indicate whether the System Error on Correctable Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnCorrectableError[24]; - -/** Offset 0x0744 - PCIE RP Max Payload - Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. -**/ - UINT8 PcieRpMaxPayload[24]; - -/** Offset 0x075C - Touch Host Controller Port 0 Assignment - Assign THC Port 0 - 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0 -**/ - UINT8 ThcPort0Assignment; - -/** Offset 0x075D -**/ - UINT8 UnusedUpdSpace19[3]; - -/** Offset 0x0760 - THC Port 0 Interrupt Pin Mux - Set THC Port 0 Pin Muxing Value if signal can be enabled on multiple pads. Refer - to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values. -**/ - UINT32 ThcPort0InterruptPinMuxing; - -/** Offset 0x0764 - Touch Host Controller Port 1 Assignment - Assign THC Port 1 - 0x0:ThcAssignmentNone, 0x1:ThcPort1AssignmentThc0, 0x2:ThcAssignmentThc1 -**/ - UINT8 ThcPort1Assignment; - -/** Offset 0x0765 - Touch Host Controller Port 1 ReadFrequency - Set THC Port 1 Read Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz - 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz -**/ - UINT8 ThcPort1ReadFrequency; - -/** Offset 0x0766 - Touch Host Controller Port 1 WriteFrequency - Set THC Port 1 Write Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz - 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz -**/ - UINT8 ThcPort1WriteFrequency; - -/** Offset 0x0767 -**/ - UINT8 UnusedUpdSpace20; - -/** Offset 0x0768 - THC Port 1 Interrupt Pin Mux - Set THC Port 1 Pin Muxing Value if signal can be enabled on multiple pads. Refer - to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values. -**/ - UINT32 ThcPort1InterruptPinMuxing; - -/** Offset 0x076C - PCIE RP Pcie Speed - Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: - PCIE_SPEED). -**/ - UINT8 PcieRpPcieSpeed[24]; - -/** Offset 0x0784 - PCIE RP Physical Slot Number - Indicates the slot number for the root port. Default is the value as root port index. -**/ - UINT8 PcieRpPhysicalSlotNumber[24]; - -/** Offset 0x079C - PCIE RP Completion Timeout - The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default. -**/ - UINT8 PcieRpCompletionTimeout[24]; - -/** Offset 0x07B4 - PCIE RP Aspm - The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is - PchPcieAspmAutoConfig. -**/ - UINT8 PcieRpAspm[24]; - -/** Offset 0x07CC - PCIE RP L1 Substates - The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). - Default is PchPcieL1SubstatesL1_1_2. -**/ - UINT8 PcieRpL1Substates[24]; - -/** Offset 0x07E4 - PCIE RP Ltr Enable - Latency Tolerance Reporting Mechanism. -**/ - UINT8 PcieRpLtrEnable[24]; - -/** Offset 0x07FC - PCIE RP Ltr Config Lock - 0: Disable; 1: Enable. -**/ - UINT8 PcieRpLtrConfigLock[24]; - -/** Offset 0x0814 - PCIe override default settings for EQ - Choose PCIe EQ method - $EN_DIS -**/ - UINT8 PcieEqOverrideDefault; - -/** Offset 0x0815 - PCIe choose EQ method - Choose PCIe EQ method - 0: HardwareEq, 1: FixedEq -**/ - UINT8 PcieEqMethod; - -/** Offset 0x0816 - PCIe choose EQ mode - Choose PCIe EQ mode - 0: PresetEq, 1: CoefficientEq -**/ - UINT8 PcieEqMode; - -/** Offset 0x0817 - PCIe EQ local transmitter override - Enable/Disable local transmitter override - $EN_DIS -**/ - UINT8 PcieEqLocalTransmitterOverrideEnable; - -/** Offset 0x0818 - PCIe number of valid list entries - Select number of presets or coefficients depending on the mode -**/ - UINT8 PcieEqPh3NumberOfPresetsOrCoefficients; - -/** Offset 0x0819 - PCIe pre-cursor coefficient list - Provide a list of pre-cursor coefficients to be used during phase 3 EQ -**/ - UINT8 PcieEqPh3PreCursorList[10]; - -/** Offset 0x0823 - PCIe post-cursor coefficient list - Provide a list of post-cursor coefficients to be used during phase 3 EQ -**/ - UINT8 PcieEqPh3PostCursorList[10]; - -/** Offset 0x082D - PCIe preset list - Provide a list of presets to be used during phase 3 EQ -**/ - UINT8 PcieEqPh3PresetList[11]; - -/** Offset 0x0838 - PCIe EQ phase 1 downstream transmitter port preset - Allows to select the downstream port preset value that will be used during phase - 1 of equalization -**/ - UINT32 PcieEqPh1DownstreamPortTransmitterPreset; - -/** Offset 0x083C - PCIe EQ phase 1 upstream tranmitter port preset - Allows to select the upstream port preset value that will be used during phase 1 - of equalization -**/ - UINT32 PcieEqPh1UpstreamPortTransmitterPreset; - -/** Offset 0x0840 - PCIe EQ phase 2 local transmitter override preset - Allows to select the value of the preset used during phase 2 local transmitter override -**/ - UINT8 PcieEqPh2LocalTransmitterOverridePreset; - -/** Offset 0x0841 - PCIE Enable Peer Memory Write - This member describes whether Peer Memory Writes are enabled on the platform. - $EN_DIS -**/ - UINT8 PcieEnablePeerMemoryWrite; - -/** Offset 0x0842 - PCIE Compliance Test Mode - Compliance Test Mode shall be enabled when using Compliance Load Board. - $EN_DIS -**/ - UINT8 PcieComplianceTestMode; - -/** Offset 0x0843 - PCIE Rp Function Swap - Allows BIOS to use root port function number swapping when root port of function - 0 is disabled. - $EN_DIS -**/ - UINT8 PcieRpFunctionSwap; - -/** Offset 0x0844 - Enable/Disable PEG GEN3 Static EQ Phase1 programming - Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets - Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 CpuPcieGen3ProgramStaticEq; - -/** Offset 0x0845 - Enable/Disable GEN4 Static EQ Phase1 programming - Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets - Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming - $EN_DIS -**/ - UINT8 CpuPcieGen4ProgramStaticEq; - -/** Offset 0x0846 - PCH Pm PME_B0_S5_DIS - When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. - $EN_DIS -**/ - UINT8 PchPmPmeB0S5Dis; - -/** Offset 0x0847 - PCIE IMR - Enables Isolated Memory Region for PCIe. - $EN_DIS -**/ - UINT8 PcieRpImrEnabled; - -/** Offset 0x0848 - PCIE IMR port number - Selects PCIE root port number for IMR feature. -**/ - UINT8 PcieRpImrSelection; - -/** Offset 0x0849 - PCH Pm Wol Enable Override - Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. - $EN_DIS -**/ - UINT8 PchPmWolEnableOverride; - -/** Offset 0x084A - PCH Pm Pcie Wake From DeepSx - Determine if enable PCIe to wake from deep Sx. - $EN_DIS -**/ - UINT8 PchPmPcieWakeFromDeepSx; - -/** Offset 0x084B - PCH Pm WoW lan Enable - Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. - $EN_DIS -**/ - UINT8 PchPmWoWlanEnable; - -/** Offset 0x084C - PCH Pm WoW lan DeepSx Enable - Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the - PWRM_CFG3 register. - $EN_DIS -**/ - UINT8 PchPmWoWlanDeepSxEnable; - -/** Offset 0x084D - PCH Pm Lan Wake From DeepSx - Determine if enable LAN to wake from deep Sx. - $EN_DIS -**/ - UINT8 PchPmLanWakeFromDeepSx; - -/** Offset 0x084E - PCH Pm Deep Sx Pol - Deep Sx Policy. - $EN_DIS -**/ - UINT8 PchPmDeepSxPol; - -/** Offset 0x084F - PCH Pm Slp S3 Min Assert - SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. -**/ - UINT8 PchPmSlpS3MinAssert; - -/** Offset 0x0850 - PCH Pm Slp S4 Min Assert - SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. -**/ - UINT8 PchPmSlpS4MinAssert; - -/** Offset 0x0851 - PCH Pm Slp Sus Min Assert - SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. -**/ - UINT8 PchPmSlpSusMinAssert; - -/** Offset 0x0852 - PCH Pm Slp A Min Assert - SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. -**/ - UINT8 PchPmSlpAMinAssert; - -/** Offset 0x0853 - USB Overcurrent Override for DbC - This option overrides USB Over Current enablement state that USB OC will be disabled - after enabling this option. Enable when DbC is used to avoid signaling conflicts. - $EN_DIS -**/ - UINT8 PchEnableDbcObs; - -/** Offset 0x0854 - PCH Pm Slp Strch Sus Up - Enable SLP_X Stretching After SUS Well Power Up. - $EN_DIS -**/ - UINT8 PchPmSlpStrchSusUp; - -/** Offset 0x0855 - PCH Pm Slp Lan Low Dc - Enable/Disable SLP_LAN# Low on DC Power. - $EN_DIS -**/ - UINT8 PchPmSlpLanLowDc; - -/** Offset 0x0856 - PCH Pm Pwr Btn Override Period - PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. -**/ - UINT8 PchPmPwrBtnOverridePeriod; - -/** Offset 0x0857 - PCH Pm Disable Dsx Ac Present Pulldown - When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. - $EN_DIS -**/ - UINT8 PchPmDisableDsxAcPresentPulldown; - -/** Offset 0x0858 - PCH Pm Disable Native Power Button - Power button native mode disable. - $EN_DIS -**/ - UINT8 PchPmDisableNativePowerButton; - -/** Offset 0x0859 - PCH Pm ME_WAKE_STS - Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. - $EN_DIS -**/ - UINT8 PchPmMeWakeSts; - -/** Offset 0x085A - PCH Pm WOL_OVR_WK_STS - Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. - $EN_DIS -**/ - UINT8 PchPmWolOvrWkSts; - -/** Offset 0x085B - PCH Pm Reset Power Cycle Duration - Could be customized in the unit of second. Please refer to EDS for all support settings. - 0 is default, 1 is 1 second, 2 is 2 seconds, ... -**/ - UINT8 PchPmPwrCycDur; - -/** Offset 0x085C - PCH Pm Pcie Pll Ssc - Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No - BIOS override. -**/ - UINT8 PchPmPciePllSsc; - -/** Offset 0x085D - PCH Legacy IO Low Latency Enable - Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable - $EN_DIS -**/ - UINT8 PchLegacyIoLowLatency; - -/** Offset 0x085E - PCH Sata Pwr Opt Enable - SATA Power Optimizer on PCH side. - $EN_DIS -**/ - UINT8 SataPwrOptEnable; - -/** Offset 0x085F - PCH Sata eSATA Speed Limit - When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. - $EN_DIS -**/ - UINT8 EsataSpeedLimit; - -/** Offset 0x0860 - PCH Sata Speed Limit - Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. -**/ - UINT8 SataSpeedLimit; - -/** Offset 0x0861 - Enable SATA Port HotPlug - Enable SATA Port HotPlug. -**/ - UINT8 SataPortsHotPlug[8]; - -/** Offset 0x0869 - Enable SATA Port Interlock Sw - Enable SATA Port Interlock Sw. -**/ - UINT8 SataPortsInterlockSw[8]; - -/** Offset 0x0871 - Enable SATA Port External - Enable SATA Port External. -**/ - UINT8 SataPortsExternal[8]; - -/** Offset 0x0879 - Enable SATA Port SpinUp - Enable the COMRESET initialization Sequence to the device. -**/ - UINT8 SataPortsSpinUp[8]; - -/** Offset 0x0881 - Enable SATA Port Solid State Drive - 0: HDD; 1: SSD. -**/ - UINT8 SataPortsSolidStateDrive[8]; - -/** Offset 0x0889 - Enable SATA Port Enable Dito Config - Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). -**/ - UINT8 SataPortsEnableDitoConfig[8]; - -/** Offset 0x0891 - Enable SATA Port DmVal - DITO multiplier. Default is 15. -**/ - UINT8 SataPortsDmVal[8]; - -/** Offset 0x0899 -**/ - UINT8 UnusedUpdSpace21[1]; - -/** Offset 0x089A - Enable SATA Port DmVal - DEVSLP Idle Timeout (DITO), Default is 625. -**/ - UINT16 SataPortsDitoVal[8]; - -/** Offset 0x08AA - Enable SATA Port ZpOdd - Support zero power ODD. -**/ - UINT8 SataPortsZpOdd[8]; - -/** Offset 0x08B2 - PCH Sata Rst Raid Alternate Id - Enable RAID Alternate ID. - $EN_DIS -**/ - UINT8 SataRstRaidDeviceId; - -/** Offset 0x08B3 - PCH Sata Rst Raid0 - RAID0. - $EN_DIS -**/ - UINT8 SataRstRaid0; - -/** Offset 0x08B4 - PCH Sata Rst Raid1 - RAID1. - $EN_DIS -**/ - UINT8 SataRstRaid1; - -/** Offset 0x08B5 - PCH Sata Rst Raid10 - RAID10. - $EN_DIS -**/ - UINT8 SataRstRaid10; - -/** Offset 0x08B6 - PCH Sata Rst Raid5 - RAID5. - $EN_DIS -**/ - UINT8 SataRstRaid5; - -/** Offset 0x08B7 - PCH Sata Rst Irrt - Intel Rapid Recovery Technology. - $EN_DIS -**/ - UINT8 SataRstIrrt; - -/** Offset 0x08B8 - PCH Sata Rst Orom Ui Banner - OROM UI and BANNER. - $EN_DIS -**/ - UINT8 SataRstOromUiBanner; - -/** Offset 0x08B9 - PCH Sata Rst Orom Ui Delay - 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). -**/ - UINT8 SataRstOromUiDelay; - -/** Offset 0x08BA - PCH Sata Rst Hdd Unlock - Indicates that the HDD password unlock in the OS is enabled. - $EN_DIS -**/ - UINT8 SataRstHddUnlock; - -/** Offset 0x08BB - PCH Sata Rst Led Locate - Indicates that the LED/SGPIO hardware is attached and ping to locate feature is - enabled on the OS. - $EN_DIS -**/ - UINT8 SataRstLedLocate; - -/** Offset 0x08BC - PCH Sata Rst Irrt Only - Allow only IRRT drives to span internal and external ports. - $EN_DIS -**/ - UINT8 SataRstIrrtOnly; - -/** Offset 0x08BD - PCH Sata Rst Smart Storage - RST Smart Storage caching Bit. - $EN_DIS -**/ - UINT8 SataRstSmartStorage; - -/** Offset 0x08BE - PCH Sata Rst Pcie Storage Remap enable - Enable Intel RST for PCIe Storage remapping. -**/ - UINT8 SataRstPcieEnable[3]; - -/** Offset 0x08C1 - PCH Sata Rst Pcie Storage Port - Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). -**/ - UINT8 SataRstPcieStoragePort[3]; - -/** Offset 0x08C4 - PCH Sata Rst Pcie Device Reset Delay - PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms -**/ - UINT8 SataRstPcieDeviceResetDelay[3]; - -/** Offset 0x08C7 - UFS enable/disable - PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms - $EN_DIS -**/ - UINT8 UfsEnable[2]; - -/** Offset 0x08C9 - IEH Mode - Integrated Error Handler Mode, 0: Bypass, 1: Enable - 0: Bypass, 1:Enable -**/ - UINT8 IehMode; - -/** Offset 0x08CA - Thermal Throttling Custimized T0Level Value - Custimized T0Level value. -**/ - UINT16 PchT0Level; - -/** Offset 0x08CC - Thermal Throttling Custimized T1Level Value - Custimized T1Level value. -**/ - UINT16 PchT1Level; - -/** Offset 0x08CE - Thermal Throttling Custimized T2Level Value - Custimized T2Level value. -**/ - UINT16 PchT2Level; - -/** Offset 0x08D0 - Enable The Thermal Throttle - Enable the thermal throttle function. - $EN_DIS -**/ - UINT8 PchTTEnable; - -/** Offset 0x08D1 - PMSync State 13 - When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force - at least T2 state. - $EN_DIS -**/ - UINT8 PchTTState13Enable; - -/** Offset 0x08D2 - Thermal Throttle Lock - Thermal Throttle Lock. - $EN_DIS -**/ - UINT8 PchTTLock; - -/** Offset 0x08D3 - Thermal Throttling Suggested Setting - Thermal Throttling Suggested Setting. - $EN_DIS -**/ - UINT8 TTSuggestedSetting; - -/** Offset 0x08D4 - Enable PCH Cross Throttling - Enable/Disable PCH Cross Throttling - $EN_DIS -**/ - UINT8 TTCrossThrottling; - -/** Offset 0x08D5 - DMI Thermal Sensor Autonomous Width Enable - DMI Thermal Sensor Autonomous Width Enable. - $EN_DIS -**/ - UINT8 PchDmiTsawEn; - -/** Offset 0x08D6 - DMI Thermal Sensor Suggested Setting - DMT thermal sensor suggested representative values. - $EN_DIS -**/ - UINT8 DmiSuggestedSetting; - -/** Offset 0x08D7 - Thermal Sensor 0 Target Width - Thermal Sensor 0 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS0TW; - -/** Offset 0x08D8 - Thermal Sensor 1 Target Width - Thermal Sensor 1 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS1TW; - -/** Offset 0x08D9 - Thermal Sensor 2 Target Width - Thermal Sensor 2 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS2TW; - -/** Offset 0x08DA - Thermal Sensor 3 Target Width - Thermal Sensor 3 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS3TW; - -/** Offset 0x08DB - Port 0 T1 Multipler - Port 0 T1 Multipler. -**/ - UINT8 SataP0T1M; - -/** Offset 0x08DC - Port 0 T2 Multipler - Port 0 T2 Multipler. -**/ - UINT8 SataP0T2M; - -/** Offset 0x08DD - Port 0 T3 Multipler - Port 0 T3 Multipler. -**/ - UINT8 SataP0T3M; - -/** Offset 0x08DE - Port 0 Tdispatch - Port 0 Tdispatch. -**/ - UINT8 SataP0TDisp; - -/** Offset 0x08DF - Port 1 T1 Multipler - Port 1 T1 Multipler. -**/ - UINT8 SataP1T1M; - -/** Offset 0x08E0 - Port 1 T2 Multipler - Port 1 T2 Multipler. -**/ - UINT8 SataP1T2M; - -/** Offset 0x08E1 - Port 1 T3 Multipler - Port 1 T3 Multipler. -**/ - UINT8 SataP1T3M; - -/** Offset 0x08E2 - Port 1 Tdispatch - Port 1 Tdispatch. -**/ - UINT8 SataP1TDisp; - -/** Offset 0x08E3 - Port 0 Tinactive - Port 0 Tinactive. -**/ - UINT8 SataP0Tinact; - -/** Offset 0x08E4 - Port 0 Alternate Fast Init Tdispatch - Port 0 Alternate Fast Init Tdispatch. - $EN_DIS -**/ - UINT8 SataP0TDispFinit; - -/** Offset 0x08E5 - Port 1 Tinactive - Port 1 Tinactive. -**/ - UINT8 SataP1Tinact; - -/** Offset 0x08E6 - Port 1 Alternate Fast Init Tdispatch - Port 1 Alternate Fast Init Tdispatch. - $EN_DIS -**/ - UINT8 SataP1TDispFinit; - -/** Offset 0x08E7 - Sata Thermal Throttling Suggested Setting - Sata Thermal Throttling Suggested Setting. - $EN_DIS -**/ - UINT8 SataThermalSuggestedSetting; - -/** Offset 0x08E8 - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. - $EN_DIS -**/ - UINT8 PchMemoryThrottlingEnable; - -/** Offset 0x08E9 - Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryPmsyncEnable[2]; - -/** Offset 0x08EB - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryC0TransmitEnable[2]; - -/** Offset 0x08ED - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryPinSelection[2]; - -/** Offset 0x08EF -**/ - UINT8 UnusedUpdSpace22; - -/** Offset 0x08F0 - Thermal Device Temperature - Decides the temperature. -**/ - UINT16 PchTemperatureHotLevel; - -/** Offset 0x08F2 - USB2 Port Over Current Pin - Describe the specific over current pin number of USB 2.0 Port N. -**/ - UINT8 Usb2OverCurrentPin[16]; - -/** Offset 0x0902 - USB3 Port Over Current Pin - Describe the specific over current pin number of USB 3.0 Port N. -**/ - UINT8 Usb3OverCurrentPin[10]; - -/** Offset 0x090C - Enable xHCI LTR override - Enables override of recommended LTR values for xHCI - $EN_DIS -**/ - UINT8 PchUsbLtrOverrideEnable; - -/** Offset 0x090D -**/ - UINT8 UnusedUpdSpace23[3]; - -/** Offset 0x0910 - xHCI High Idle Time LTR override - Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting -**/ - UINT32 PchUsbLtrHighIdleTimeOverride; - -/** Offset 0x0914 - xHCI Medium Idle Time LTR override - Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting -**/ - UINT32 PchUsbLtrMediumIdleTimeOverride; - -/** Offset 0x0918 - xHCI Low Idle Time LTR override - Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting -**/ - UINT32 PchUsbLtrLowIdleTimeOverride; - -/** Offset 0x091C - Enable 8254 Static Clock Gating - Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time - might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support - legacy OS using 8254 timer. Also enable this while S0ix is enabled. - $EN_DIS -**/ - UINT8 Enable8254ClockGating; - -/** Offset 0x091D - Enable 8254 Static Clock Gating On S3 - This is only applicable when Enable8254ClockGating is disabled. FSP will do the - 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This - avoids the SMI requirement for the programming. - $EN_DIS -**/ - UINT8 Enable8254ClockGatingOnS3; - -/** Offset 0x091E - PCH Sata Rst Optane Memory - Optane Memory - $EN_DIS -**/ - UINT8 SataRstOptaneMemory; - -/** Offset 0x091F - PCH Sata Rst CPU Attached Storage - CPU Attached Storage - $EN_DIS -**/ - UINT8 SataRstCpuAttachedStorage; - -/** Offset 0x0920 - Enable TCO timer. - When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have - huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer - emulation must be enabled, and WDAT table must not be exposed to the OS. - $EN_DIS -**/ - UINT8 EnableTcoTimer; - -/** Offset 0x0921 - Hybrid Storage Detection and Configuration Mode - Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration. - Default is 0: Disabled - 0: Disabled, 1: Dynamic Configuration -**/ - UINT8 HybridStorageMode; - -/** Offset 0x0922 -**/ - UINT8 UnusedUpdSpace24[6]; - -/** Offset 0x0928 - BgpdtHash[4] - BgpdtHash values -**/ - UINT64 BgpdtHash[4]; - -/** Offset 0x0948 - BiosGuardAttr - BiosGuardAttr default values -**/ - UINT32 BiosGuardAttr; - -/** Offset 0x094C -**/ - UINT8 UnusedUpdSpace25[4]; - -/** Offset 0x0950 - BiosGuardModulePtr - BiosGuardModulePtr default values -**/ - UINT64 BiosGuardModulePtr; - -/** Offset 0x0958 - SendEcCmd - SendEcCmd function pointer. \n - @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE - EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode -**/ - UINT64 SendEcCmd; - -/** Offset 0x0960 - EcCmdProvisionEav - Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC -**/ - UINT8 EcCmdProvisionEav; - -/** Offset 0x0961 - EcCmdLock - EcCmdLock default values. Locks Ephemeral Authorization Value sent previously -**/ - UINT8 EcCmdLock; - -/** Offset 0x0962 -**/ - UINT8 UnusedUpdSpace26[6]; - -/** Offset 0x0968 - SgxEpoch0 - SgxEpoch0 default values -**/ - UINT64 SgxEpoch0; - -/** Offset 0x0970 - SgxEpoch1 - SgxEpoch1 default values -**/ - UINT64 SgxEpoch1; - -/** Offset 0x0978 - SgxSinitNvsData - SgxSinitNvsData default values -**/ - UINT8 SgxSinitNvsData; - -/** Offset 0x0979 - Si Config CSM Flag. - <b>@deprecated</b> Platform specific common policies that used by several silicon - components. CSM status flag. - $EN_DIS -**/ - UINT8 SiCsmFlag; - -/** Offset 0x097A - Skip Ssid Programming. - When set to TRUE, silicon code will not do any SSID programming and platform code - needs to handle that by itself properly. - $EN_DIS -**/ - UINT8 SiSkipSsidProgramming; - -/** Offset 0x097B -**/ - UINT8 UnusedUpdSpace27; - -/** Offset 0x097C - Change Default SVID - Change the default SVID used in FSP to programming internal devices. This is only - valid when SkipSsidProgramming is FALSE. -**/ - UINT16 SiCustomizedSvid; - -/** Offset 0x097E - Change Default SSID - Change the default SSID used in FSP to programming internal devices. This is only - valid when SkipSsidProgramming is FALSE. -**/ - UINT16 SiCustomizedSsid; - -/** Offset 0x0980 - SVID SDID table Poniter. - The address of the table of SVID SDID to customize each SVID SDID entry. This is - only valid when SkipSsidProgramming is FALSE. -**/ - UINT32 SiSsidTablePtr; - -/** Offset 0x0984 - Number of ssid table. - SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. - This is only valid when SkipSsidProgramming is FALSE. -**/ - UINT16 SiNumberOfSsidTableEntry; - -/** Offset 0x0986 - USB2 Port Reset Message Enable - 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message -**/ - UINT8 PortResetMessageEnable[16]; - -/** Offset 0x0996 - SATA RST Interrupt Mode - Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. - 0:Msix, 1:Msi, 2:Legacy -**/ - UINT8 SataRstInterrupt; - -/** Offset 0x0997 - ME Unconfig on RTC clear - 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. - 2: Cmos is clear, status unkonwn. 3: Reserved - 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos - is clear, 3: Reserved -**/ - UINT8 MeUnconfigOnRtcClear; - -/** Offset 0x0998 - Enable PS_ON. - PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power - target that will be required by the California Energy Commission (CEC). When FALSE, - PS_ON is to be disabled. - $EN_DIS -**/ - UINT8 PsOnEnable; - -/** Offset 0x0999 - Pmc Cpu C10 Gate Pin Enable - Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO - and VccSTG rails instead of SLP_S0# pin. - $EN_DIS -**/ - UINT8 PmcCpuC10GatePinEnable; - -/** Offset 0x099A - Pch Dmi Aspm Ctrl - ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b> - 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto -**/ - UINT8 PchDmiAspmCtrl; - -/** Offset 0x099B - PchDmiCwbEnable - Central Write Buffer feature configurable and enabled by default - $EN_DIS -**/ - UINT8 PchDmiCwbEnable; - -/** Offset 0x099C - OS IDLE Mode Enable - Enable/Disable OS Idle Mode - $EN_DIS -**/ - UINT8 PmcOsIdleEnable; - -/** Offset 0x099D - S0ix Auto-Demotion - Enable/Disable the Low Power Mode Auto-Demotion Host Control feature. - $EN_DIS -**/ - UINT8 PchS0ixAutoDemotion; - -/** Offset 0x099E - Latch Events C10 Exit - When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are - captured on C10 exit (instead of C10 entry which is default) - $EN_DIS -**/ - UINT8 PchPmLatchEventsC10Exit; - -/** Offset 0x099F - PCIE Eq Ph3 Lane Param Cm - CPU_PCIE_EQ_LANE_PARAM. Coefficient C-1. -**/ - UINT8 CpuPcieEqPh3LaneParamCm[32]; - -/** Offset 0x09BF - PCIE Eq Ph3 Lane Param Cp - CPU_PCIE_EQ_LANE_PARAM. Coefficient C+1. -**/ - UINT8 CpuPcieEqPh3LaneParamCp[32]; - -/** Offset 0x09DF - PCIE Hw Eq Gen3 CoeffList Cm - CPU_PCIE_EQ_PARAM. Coefficient C-1. -**/ - UINT8 CpuPcieHwEqGen3CoeffListCm[5]; - -/** Offset 0x09E4 - PCIE Hw Eq Gen3 CoeffList Cp - CPU_PCIE_EQ_PARAM. Coefficient C+1. -**/ - UINT8 CpuPcieHwEqGen3CoeffListCp[5]; - -/** Offset 0x09E9 - PCIE Hw Eq Gen4 CoeffList Cm - CPU_PCIE_EQ_PARAM. Coefficient C-1. -**/ - UINT8 CpuPcieHwEqGen4CoeffListCm[5]; - -/** Offset 0x09EE - PCIE Hw Eq Gen4 CoeffList Cp - CPU_PCIE_EQ_PARAM. Coefficient C+1. -**/ - UINT8 CpuPcieHwEqGen4CoeffListCp[5]; - -/** Offset 0x09F3 - Gen3 Root port preset values per lane - Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 8 is default - for each lane -**/ - UINT8 CpuPcieGen3RootPortPreset[20]; - -/** Offset 0x0A07 - Pcie Gen4 Root port preset values per lane - Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 8 is default - for each lane -**/ - UINT8 CpuPcieGen4RootPortPreset[20]; - -/** Offset 0x0A1B - Pcie Gen3 End port preset values per lane - Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 7 is default - for each lane -**/ - UINT8 CpuPcieGen3EndPointPreset[20]; - -/** Offset 0x0A2F - Pcie Gen4 End port preset values per lane - Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 7 is default - for each lane -**/ - UINT8 CpuPcieGen4EndPointPreset[20]; - -/** Offset 0x0A43 - Pcie Gen3 End port Hint values per lane - Used for programming Pcie Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 CpuPcieGen3EndPointHint[20]; - -/** Offset 0x0A57 - Pcie Gen4 End port Hint values per lane - Used for programming Pcie Gen4 Hint values per lane. Range: 0-6, 2 is default for each lane -**/ - UINT8 CpuPcieGen4EndPointHint[20]; - -/** Offset 0x0A6B - CPU PCIe Fia Programming - Load Fia configuration if enable. 0: Disable; 1: Enable(Default). - $EN_DIS -**/ - UINT8 CpuPcieFiaProgramming; - -/** Offset 0x0A6C - CPU PCIe RootPort Clock Gating - Describes whether the PCI Express Clock Gating for each root port is enabled by - platform modules. 0: Disable; 1: Enable(Default). - $EN_DIS -**/ - UINT8 CpuPcieClockGating; - -/** Offset 0x0A6D - CPU PCIe RootPort Power Gating - Describes whether the PCI Express Power Gating for each root port is enabled by - platform modules. 0: Disable; 1: Enable(Default). - $EN_DIS -**/ - UINT8 CpuPciePowerGating; - -/** Offset 0x0A6E - PCIE Compliance Test Mode - Compliance Test Mode shall be enabled when using Compliance Load Board. - $EN_DIS -**/ - UINT8 CpuPcieComplianceTestMode; - -/** Offset 0x0A6F - PCIE Secure Register Lock - Describes whether Secure Register Lock is enaled or disabled. When it will be enbaled, - load CpuPcieRpSetSecuredRegisterLock recipe. DEPRECATED 0: Disable(Default); 1: Enable - $EN_DIS -**/ - UINT8 CpuPcieSetSecuredRegisterLock; - -/** Offset 0x0A70 - PCIE Enable Peer Memory Write - This member describes whether Peer Memory Writes are enabled on the platform. - $EN_DIS -**/ - UINT8 CpuPcieEnablePeerMemoryWrite; - -/** Offset 0x0A71 - PCIE Rp Function Swap - Allows BIOS to use root port function number swapping when root port of function - 0 is disabled. - $EN_DIS -**/ - UINT8 CpuPcieRpFunctionSwap; - -/** Offset 0x0A72 - PCI Express Slot Selection - Select the PCIe M2 or CEMx4 slot.0: CEMx4 slot; 1: M2 slot(Default). - $EN_DIS -**/ - UINT8 CpuPcieSlotSelection; - -/** Offset 0x0A73 -**/ - UINT8 UnusedUpdSpace28; - -/** Offset 0x0A74 - CPU PCIE device override table pointer - The PCIe device table is being used to override PCIe device ASPM settings. This - is a pointer points to a 32bit address. And it's only used in PostMem phase. Please - refer to CPU_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId - must be 0. -**/ - UINT32 CpuPcieDeviceOverrideTablePtr; - -/** Offset 0x0A78 - Enable PCIE RP HotPlug - Indicate whether the root port is hot plug available. -**/ - UINT8 CpuPcieRpHotPlug[4]; - -/** Offset 0x0A7C - Enable PCIE RP Pm Sci - Indicate whether the root port power manager SCI is enabled. -**/ - UINT8 CpuPcieRpPmSci[4]; - -/** Offset 0x0A80 - Enable PCIE RP Transmitter Half Swing - Indicate whether the Transmitter Half Swing is enabled. -**/ - UINT8 CpuPcieRpTransmitterHalfSwing[4]; - -/** Offset 0x0A84 - PCIE RP Access Control Services Extended Capability - Enable/Disable PCIE RP Access Control Services Extended Capability -**/ - UINT8 CpuPcieRpAcsEnabled[4]; - -/** Offset 0x0A88 - PCIE RP Clock Power Management - Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal - can still be controlled by L1 PM substates mechanism -**/ - UINT8 CpuPcieRpEnableCpm[4]; - -/** Offset 0x0A8C - PCIE RP Advanced Error Report - Indicate whether the Advanced Error Reporting is enabled. -**/ - UINT8 CpuPcieRpAdvancedErrorReporting[4]; - -/** Offset 0x0A90 - PCIE RP Unsupported Request Report - Indicate whether the Unsupported Request Report is enabled. -**/ - UINT8 CpuPcieRpUnsupportedRequestReport[4]; - -/** Offset 0x0A94 - PCIE RP Fatal Error Report - Indicate whether the Fatal Error Report is enabled. -**/ - UINT8 CpuPcieRpFatalErrorReport[4]; - -/** Offset 0x0A98 - PCIE RP No Fatal Error Report - Indicate whether the No Fatal Error Report is enabled. -**/ - UINT8 CpuPcieRpNoFatalErrorReport[4]; - -/** Offset 0x0A9C - PCIE RP Correctable Error Report - Indicate whether the Correctable Error Report is enabled. -**/ - UINT8 CpuPcieRpCorrectableErrorReport[4]; - -/** Offset 0x0AA0 - PCIE RP System Error On Fatal Error - Indicate whether the System Error on Fatal Error is enabled. -**/ - UINT8 CpuPcieRpSystemErrorOnFatalError[4]; - -/** Offset 0x0AA4 - PCIE RP System Error On Non Fatal Error - Indicate whether the System Error on Non Fatal Error is enabled. -**/ - UINT8 CpuPcieRpSystemErrorOnNonFatalError[4]; - -/** Offset 0x0AA8 - PCIE RP System Error On Correctable Error - Indicate whether the System Error on Correctable Error is enabled. -**/ - UINT8 CpuPcieRpSystemErrorOnCorrectableError[4]; - -/** Offset 0x0AAC - PCIE RP Max Payload - Max Payload Size supported, Default 128B, see enum CPU_PCIE_MAX_PAYLOAD. -**/ - UINT8 CpuPcieRpMaxPayload[4]; - -/** Offset 0x0AB0 - DPC for PCIE RP Mask - Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. - One bit for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT8 CpuPcieRpDpcEnabled[4]; - -/** Offset 0x0AB4 - DPC Extensions PCIE RP Mask - Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit - for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT8 CpuPcieRpDpcExtensionsEnabled[4]; - -/** Offset 0x0AB8 - CPU PCIe root port connection type - 0: built-in device, 1:slot -**/ - UINT8 CpuPcieRpSlotImplemented[4]; - -/** Offset 0x0ABC - PCIE RP Gen3 Equalization Phase Method - PCIe Gen3 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; - 1: hardware equalization; 4: Fixed Coeficients. -**/ - UINT8 CpuPcieRpGen3EqPh3Method[4]; - -/** Offset 0x0AC0 - PCIE RP Gen4 Equalization Phase Method - PCIe Gen4 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; - 1: hardware equalization; 4: Fixed Coeficients. -**/ - UINT8 CpuPcieRpGen4EqPh3Method[4]; - -/** Offset 0x0AC4 - PCIE RP Physical Slot Number - Indicates the slot number for the root port. Default is the value as root port index. -**/ - UINT8 CpuPcieRpPhysicalSlotNumber[4]; - -/** Offset 0x0AC8 - PCIE RP Aspm - The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL).0: Disable; - 2: CpuPcieAspmL1(Default) -**/ - UINT8 CpuPcieRpAspm[4]; - -/** Offset 0x0ACC - PCIE RP L1 Substates - The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL). - Default is CpuPcieL1SubstatesL1_1_2. -**/ - UINT8 CpuPcieRpL1Substates[4]; - -/** Offset 0x0AD0 - PCIE RP Ltr Enable - Latency Tolerance Reporting Mechanism. -**/ - UINT8 CpuPcieRpLtrEnable[4]; - -/** Offset 0x0AD4 - PCIE RP Ltr Config Lock - 0: Disable; 1: Enable. -**/ - UINT8 CpuPcieRpLtrConfigLock[4]; - -/** Offset 0x0AD8 - RpPtmBytes -**/ - UINT8 RpPtmBytes[4]; - -/** Offset 0x0ADC - PCIE RP Detect Timeout Ms - The number of milliseconds within 0~65535 in reference code will wait for link to - exit Detect state for enabled ports before assuming there is no device and potentially - disabling the port. -**/ - UINT16 CpuPcieRpDetectTimeoutMs[4]; - -/** Offset 0x0AE4 - VC for PCIE RP Mask - Enable/disable Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. One bit - for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT8 CpuPcieRpVcEnabled[4]; - -/** Offset 0x0AE8 - Multi-VC for PCIE RP Mask - Enable/disable Multiple Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. - One bit for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT8 CpuPcieRpMultiVcEnabled[4]; - -/** Offset 0x0AEC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each - value in array can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxRate3UniqTranEnable[10]; - -/** Offset 0x0AF6 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default - = 4Ch</b>. One byte for each port. -**/ - UINT8 Usb3HsioTxRate3UniqTran[10]; - -/** Offset 0x0B00 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each - value in array can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxRate2UniqTranEnable[10]; - -/** Offset 0x0B0A - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 - USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], - <b>Default = 4Ch</b>. One byte for each port. -**/ - UINT8 Usb3HsioTxRate2UniqTran[10]; - -/** Offset 0x0B14 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each - value in array can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxRate1UniqTranEnable[10]; - -/** Offset 0x0B1E - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 - USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], - <b>Default = 4Ch</b>. One byte for each port. -**/ - UINT8 Usb3HsioTxRate1UniqTran[10]; - -/** Offset 0x0B28 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each - value in array can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxRate0UniqTranEnable[10]; - -/** Offset 0x0B32 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], - <b>Default = 4Ch</b>. One byte for each port. -**/ - UINT8 Usb3HsioTxRate0UniqTran[10]; - -/** Offset 0x0B3C - Skip PAM regsiter lock - Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): - PAM registers will be locked by RC - $EN_DIS -**/ - UINT8 SkipPamLock; - -/** Offset 0x0B3D - EDRAM Test Mode - Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): - PAM registers will be locked by RC - 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode -**/ - UINT8 EdramTestMode; - -/** Offset 0x0B3E - Enable/Disable IGFX RenderStandby - Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby - $EN_DIS -**/ - UINT8 RenderStandby; - -/** Offset 0x0B3F - Enable/Disable IGFX PmSupport - Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport - $EN_DIS -**/ - UINT8 PmSupport; - -/** Offset 0x0B40 - Enable/Disable CdynmaxClamp - Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp - $EN_DIS -**/ - UINT8 CdynmaxClampEnable; - -/** Offset 0x0B41 - GT Frequency Limit - 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, - 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: - 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, - 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, - 0x18: 1200 Mhz - 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, - 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: - 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, - 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, - 0x18: 1200 Mhz -**/ - UINT8 GtFreqMax; - -/** Offset 0x0B42 - Disable Turbo GT - 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency - $EN_DIS -**/ - UINT8 DisableTurboGt; - -/** Offset 0x0B43 - Enable/Disable CdClock Init - Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full - CD clock if not initialized by Gfx PEIM - $EN_DIS -**/ - UINT8 SkipCdClockInit; - -/** Offset 0x0B44 - Enable RC1p frequency request to PMA (provided all other conditions are met) - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 RC1pFreqEnable; - -/** Offset 0x0B45 - Enable TSN Multi-VC - Enable/disable Multi Virtual Channels(VC) in TSN. - $EN_DIS -**/ - UINT8 PchTsnMultiVcEnable; - -/** Offset 0x0B46 - SaPostMemTestRsvd - Reserved for SA Post-Mem Test - $EN_DIS -**/ - UINT8 SaPostMemTestRsvd[13]; - -/** Offset 0x0B53 - RSR feature - Enable or Disable RSR feature; 0: Disable; <b>1: Enable </b> - $EN_DIS -**/ - UINT8 EnableRsr; - -/** Offset 0x0B54 - 1-Core Ratio Limit - 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal - to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83 -**/ - UINT8 OneCoreRatioLimit; - -/** Offset 0x0B55 - 2-Core Ratio Limit - 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 -**/ - UINT8 TwoCoreRatioLimit; - -/** Offset 0x0B56 - 3-Core Ratio Limit - 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 -**/ - UINT8 ThreeCoreRatioLimit; - -/** Offset 0x0B57 - 4-Core Ratio Limit - 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 -**/ - UINT8 FourCoreRatioLimit; - -/** Offset 0x0B58 - Enable or Disable HWP - Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b> - 2-3:Reserved - $EN_DIS -**/ - UINT8 Hwp; - -/** Offset 0x0B59 - Hardware Duty Cycle Control - Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved - $EN_DIS -**/ - UINT8 HdcControl; - -/** Offset 0x0B5A - Package Long duration turbo mode time - Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) - 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 -**/ - UINT8 PowerLimit1Time; - -/** Offset 0x0B5B - Short Duration Turbo Mode - Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 PowerLimit2; - -/** Offset 0x0B5C - Turbo settings Lock - Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable - $EN_DIS -**/ - UINT8 TurboPowerLimitLock; - -/** Offset 0x0B5D - Package PL3 time window - Package PL3 time window range for this policy from 0 to 64ms -**/ - UINT8 PowerLimit3Time; - -/** Offset 0x0B5E - Package PL3 Duty Cycle - Package PL3 Duty Cycle; Valid Range is 0 to 100 -**/ - UINT8 PowerLimit3DutyCycle; - -/** Offset 0x0B5F - Package PL3 Lock - Package PL3 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable - $EN_DIS -**/ - UINT8 PowerLimit3Lock; - -/** Offset 0x0B60 - Package PL4 Lock - Package PL4 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable - $EN_DIS -**/ - UINT8 PowerLimit4Lock; - -/** Offset 0x0B61 - TCC Activation Offset - TCC Activation Offset. Offset from factory set TCC activation temperature at which - the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation - Temperature, in volts.For SKL Y SKU, the recommended default for this policy is - <b>10</b>, For all other SKUs the recommended default are <b>0</b> -**/ - UINT8 TccActivationOffset; - -/** Offset 0x0B62 - Tcc Offset Clamp Enable/Disable - Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle - below P1.For SKL Y SKU, the recommended default for this policy is <b>1: Enabled</b>, - For all other SKUs the recommended default are <b>0: Disabled</b>. - $EN_DIS -**/ - UINT8 TccOffsetClamp; - -/** Offset 0x0B63 - Tcc Offset Lock - Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature - target; <b>0: Disabled</b>; 1: Enabled. - $EN_DIS -**/ - UINT8 TccOffsetLock; - -/** Offset 0x0B64 - Custom Ratio State Entries - The number of custom ratio state entries, ranges from 0 to 40 for a valid custom - ratio table.Sets the number of custom P-states. At least 2 states must be present -**/ - UINT8 NumberOfEntries; - -/** Offset 0x0B65 - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 -**/ - UINT8 Custom1PowerLimit1Time; - -/** Offset 0x0B66 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 -**/ - UINT8 Custom1TurboActivationRatio; - -/** Offset 0x0B67 - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom1ConfigTdpControl; - -/** Offset 0x0B68 - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 -**/ - UINT8 Custom2PowerLimit1Time; - -/** Offset 0x0B69 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 -**/ - UINT8 Custom2TurboActivationRatio; - -/** Offset 0x0B6A - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom2ConfigTdpControl; - -/** Offset 0x0B6B - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 -**/ - UINT8 Custom3PowerLimit1Time; - -/** Offset 0x0B6C - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 -**/ - UINT8 Custom3TurboActivationRatio; - -/** Offset 0x0B6D - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom3ConfigTdpControl; - -/** Offset 0x0B6E - ConfigTdp mode settings Lock - Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 ConfigTdpLock; - -/** Offset 0x0B6F - Load Configurable TDP SSDT - Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ConfigTdpBios; - -/** Offset 0x0B70 - PL1 Enable value - PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 PsysPowerLimit1; - -/** Offset 0x0B71 - PL1 timewindow - PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 - , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 -**/ - UINT8 PsysPowerLimit1Time; - -/** Offset 0x0B72 - PL2 Enable Value - PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>; - 1: Enable. - $EN_DIS -**/ - UINT8 PsysPowerLimit2; - -/** Offset 0x0B73 - Enable or Disable MLC Streamer Prefetcher - Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MlcStreamerPrefetcher; - -/** Offset 0x0B74 - Enable or Disable MLC Spatial Prefetcher - Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 MlcSpatialPrefetcher; - -/** Offset 0x0B75 - Enable or Disable Monitor /MWAIT instructions - Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MonitorMwaitEnable; - -/** Offset 0x0B76 - Enable or Disable initialization of machine check registers - Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MachineCheckEnable; - -/** Offset 0x0B77 - AP Idle Manner of waiting for SIPI - AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop. - 1: HALT loop, 2: MWAIT loop, 3: RUN loop -**/ - UINT8 ApIdleManner; - -/** Offset 0x0B78 - Control on Processor Trace output scheme - Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. - 0: Single Range Output, 1: ToPA Output -**/ - UINT8 ProcessorTraceOutputScheme; - -/** Offset 0x0B79 - Enable or Disable Processor Trace feature - Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ProcessorTraceEnable; - -/** Offset 0x0B7A - Enable or Disable Intel SpeedStep Technology - Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 Eist; - -/** Offset 0x0B7B - Enable or Disable Energy Efficient P-state - Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; - <b>1: Enable</b> - $EN_DIS -**/ - UINT8 EnergyEfficientPState; - -/** Offset 0x0B7C - Enable or Disable Energy Efficient Turbo - Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; - <b>1: Enable</b> - $EN_DIS -**/ - UINT8 EnergyEfficientTurbo; - -/** Offset 0x0B7D - Enable or Disable T states - Enable or Disable T states; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 TStates; - -/** Offset 0x0B7E - Enable or Disable Bi-Directional PROCHOT# - Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 BiProcHot; - -/** Offset 0x0B7F - Enable or Disable PROCHOT# signal being driven externally - Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 DisableProcHotOut; - -/** Offset 0x0B80 - Enable or Disable PROCHOT# Response - Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ProcHotResponse; - -/** Offset 0x0B81 - Enable or Disable VR Thermal Alert - Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 DisableVrThermalAlert; - -/** Offset 0x0B82 - Enable or Disable Thermal Reporting - Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 EnableAllThermalFunctions; - -/** Offset 0x0B83 - Enable or Disable Thermal Monitor - Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 ThermalMonitor; - -/** Offset 0x0B84 - Enable or Disable CPU power states (C-states) - Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 Cx; - -/** Offset 0x0B85 - Configure C-State Configuration Lock - Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 PmgCstCfgCtrlLock; - -/** Offset 0x0B86 - Enable or Disable Enhanced C-states - Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1e; - -/** Offset 0x0B87 - Enable or Disable Package Cstate Demotion - Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 PkgCStateDemotion; - -/** Offset 0x0B88 - Enable or Disable Package Cstate UnDemotion - Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 PkgCStateUnDemotion; - -/** Offset 0x0B89 - Enable or Disable CState-Pre wake - Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 CStatePreWake; - -/** Offset 0x0B8A - Enable or Disable TimedMwait Support. - Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 TimedMwait; - -/** Offset 0x0B8B - Enable or Disable IO to MWAIT redirection - Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 CstCfgCtrIoMwaitRedirection; - -/** Offset 0x0B8C - Set the Max Pkg Cstate - Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep - C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , - 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto -**/ - UINT8 PkgCStateLimit; - -/** Offset 0x0B8D - TimeUnit for C-State Latency Control0 - TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl0TimeUnit; - -/** Offset 0x0B8E - TimeUnit for C-State Latency Control1 - TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl1TimeUnit; - -/** Offset 0x0B8F - TimeUnit for C-State Latency Control2 - TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl2TimeUnit; - -/** Offset 0x0B90 - TimeUnit for C-State Latency Control3 - TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl3TimeUnit; - -/** Offset 0x0B91 - TimeUnit for C-State Latency Control4 - Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl4TimeUnit; - -/** Offset 0x0B92 - TimeUnit for C-State Latency Control5 - TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl5TimeUnit; - -/** Offset 0x0B93 - Interrupt Redirection Mode Select - Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: - No change. -**/ - UINT8 PpmIrmSetting; - -/** Offset 0x0B94 - Lock prochot configuration - Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 ProcHotLock; - -/** Offset 0x0B95 - Configuration for boot TDP selection - Deprecated. Move to premem. -**/ - UINT8 DeprecatedConfigTdpLevel; - -/** Offset 0x0B96 - Max P-State Ratio - Max P-State Ratio, Valid Range 0 to 0x7F -**/ - UINT8 MaxRatio; - -/** Offset 0x0B97 - P-state ratios for custom P-state table - P-state ratios for custom P-state table. NumberOfEntries has valid range between - 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] - are configurable. Valid Range of each entry is 0 to 0x7F -**/ - UINT8 StateRatio[40]; - -/** Offset 0x0BBF - P-state ratios for max 16 version of custom P-state table - P-state ratios for max 16 version of custom P-state table. This table is used for - OS versions limited to a max of 16 P-States. If the first entry of this table is - 0, or if Number of Entries is 16 or less, then this table will be ignored, and - up to the top 16 values of the StateRatio table will be used instead. Valid Range - of each entry is 0 to 0x7F -**/ - UINT8 StateRatioMax16[16]; - -/** Offset 0x0BCF -**/ - UINT8 UnusedUpdSpace29; - -/** Offset 0x0BD0 - Platform Power Pmax - PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. - Range 0-1024 Watts. Value of 800 = 100W -**/ - UINT16 PsysPmax; - -/** Offset 0x0BD2 - Interrupt Response Time Limit of C-State LatencyContol1 - Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF. - 0 is Auto. -**/ - UINT16 CstateLatencyControl1Irtl; - -/** Offset 0x0BD4 - Interrupt Response Time Limit of C-State LatencyContol2 - Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF. - 0 is Auto. -**/ - UINT16 CstateLatencyControl2Irtl; - -/** Offset 0x0BD6 - Interrupt Response Time Limit of C-State LatencyContol3 - Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF. - 0 is Auto. -**/ - UINT16 CstateLatencyControl3Irtl; - -/** Offset 0x0BD8 - Interrupt Response Time Limit of C-State LatencyContol4 - Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF. - 0 is Auto. -**/ - UINT16 CstateLatencyControl4Irtl; - -/** Offset 0x0BDA - Interrupt Response Time Limit of C-State LatencyContol5 - Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF. - 0 is Auto. -**/ - UINT16 CstateLatencyControl5Irtl; - -/** Offset 0x0BDC - Package Long duration turbo mode power limit - Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. - Valid Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit1; - -/** Offset 0x0BE0 - Package Short duration turbo mode power limit - Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit2Power; - -/** Offset 0x0BE4 - Package PL3 power limit - Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit3; - -/** Offset 0x0BE8 - Package PL4 power limit - Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit4; - -/** Offset 0x0BEC - Tcc Offset Time Window for RATL - Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 TccOffsetTimeWindowForRatl; - -/** Offset 0x0BF0 - Short term Power Limit value for custom cTDP level 1 - Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom1PowerLimit1; - -/** Offset 0x0BF4 - Long term Power Limit value for custom cTDP level 1 - Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom1PowerLimit2; - -/** Offset 0x0BF8 - Short term Power Limit value for custom cTDP level 2 - Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom2PowerLimit1; - -/** Offset 0x0BFC - Long term Power Limit value for custom cTDP level 2 - Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom2PowerLimit2; - -/** Offset 0x0C00 - Short term Power Limit value for custom cTDP level 3 - Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom3PowerLimit1; - -/** Offset 0x0C04 - Long term Power Limit value for custom cTDP level 3 - Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom3PowerLimit2; - -/** Offset 0x0C08 - Platform PL1 power - Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range - 0 to 4095875 in Step size of 125 -**/ - UINT32 PsysPowerLimit1Power; - -/** Offset 0x0C0C - Platform PL2 power - Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range - 0 to 4095875 in Step size of 125 -**/ - UINT32 PsysPowerLimit2Power; - -/** Offset 0x0C10 - Race To Halt - Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency - in order to enter pkg C-State faster to reduce overall power. (RTH is controlled - through MSR 1FC bit 20)Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 RaceToHalt; - -/** Offset 0x0C11 - Set Three Strike Counter Disable - False (default): Three Strike counter will be incremented and True: Prevents Three - Strike counter from incrementing; <b>0: False</b>; 1: True. - 0: False, 1: True -**/ - UINT8 ThreeStrikeCounterDisable; - -/** Offset 0x0C12 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 HwpInterruptControl; - -/** Offset 0x0C13 - 5-Core Ratio Limit - 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 - 0x0:0xFF -**/ - UINT8 FiveCoreRatioLimit; - -/** Offset 0x0C14 - 6-Core Ratio Limit - 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 - 0x0:0xFF -**/ - UINT8 SixCoreRatioLimit; - -/** Offset 0x0C15 - 7-Core Ratio Limit - 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 - 0x0:0xFF -**/ - UINT8 SevenCoreRatioLimit; - -/** Offset 0x0C16 - 8-Core Ratio Limit - 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 - 0x0:0xFF -**/ - UINT8 EightCoreRatioLimit; - -/** Offset 0x0C17 - Intel Turbo Boost Max Technology 3.0 - Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b> - $EN_DIS -**/ - UINT8 EnableItbm; - -/** Offset 0x0C18 - Intel Turbo Boost Max Technology 3.0 Driver - @Deprecated: Intel Turbo Boost Max Technology 3.0 Driver doesn't support for TGL - $EN_DIS -**/ - UINT8 EnableItbmDriver; - -/** Offset 0x0C19 - Enable or Disable C1 Cstate Demotion - Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1StateAutoDemotion; - -/** Offset 0x0C1A - Enable or Disable C1 Cstate UnDemotion - Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1StateUnDemotion; - -/** Offset 0x0C1B - Minimum Ring ratio limit override - Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo - ratio limit -**/ - UINT8 MinRingRatioLimit; - -/** Offset 0x0C1C - Maximum Ring ratio limit override - Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo - ratio limit -**/ - UINT8 MaxRingRatioLimit; - -/** Offset 0x0C1D - Enable or Disable Per Core P State OS control - Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 EnablePerCorePState; - -/** Offset 0x0C1E - Enable or Disable HwP Autonomous Per Core P State OS control - Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1: - Enable</b> - $EN_DIS -**/ - UINT8 EnableHwpAutoPerCorePstate; - -/** Offset 0x0C1F - Enable or Disable HwP Autonomous EPP Grouping - Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 EnableHwpAutoEppGrouping; - -/** Offset 0x0C20 - Enable or Disable EPB override over PECI - Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable - $EN_DIS -**/ - UINT8 EnableEpbPeciOverride; - -/** Offset 0x0C21 - Enable or Disable Fast MSR for IA32_HWP_REQUEST - Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable;<b> 1: Enable</b> - $EN_DIS -**/ - UINT8 EnableFastMsrHwpReq; - -/** Offset 0x0C22 - Enable Configurable TDP - Applies TDP initialization settings based on non-cTDP or cTDP.; 0: Applies to non-cTDP; - <b>1: Applies to cTDP</b> - $EN_DIS -**/ - UINT8 ApplyConfigTdp; - -/** Offset 0x0C23 - Enable VccIn Demotion Override Configuration - Enable VccIn Demotion Override Configuration. The timing can be configured by VccInDemotionMs. - $EN_DIS -**/ - UINT8 VccInDemotionOverride; - -/** Offset 0x0C24 - Customize the VccIn Demotion in ms. - Customize the VccIn Demotion in ms accordingly. Values used by OEM expected to be - in lower end of 1-30 ms range. Value 1 means 1ms, value 2 means 2ms, and so on. - Value 0 will disable VccIn Demotion knob.<b> It's 30ms by silicon default</b> -**/ - UINT32 VccInDemotionMs; - -/** Offset 0x0C28 - ReservedCpuPostMemTest - Reserved for CPU Post-Mem Test - $EN_DIS -**/ - UINT8 ReservedCpuPostMemTest[11]; - -/** Offset 0x0C33 - SgxSinitDataFromTpm - SgxSinitDataFromTpm default values -**/ - UINT8 SgxSinitDataFromTpm; - -/** Offset 0x0C34 -**/ - UINT8 SecurityPostMemRsvd[16]; - -/** Offset 0x0C44 - End of Post message - Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): - EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE - 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved -**/ - UINT8 EndOfPostMessage; - -/** Offset 0x0C45 - D0I3 Setting for HECI Disable - Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all - HECI devices - $EN_DIS -**/ - UINT8 DisableD0I3SettingForHeci; - -/** Offset 0x0C46 - Enable LOCKDOWN SMI - Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. - $EN_DIS -**/ - UINT8 PchLockDownGlobalSmi; - -/** Offset 0x0C47 - Enable LOCKDOWN BIOS Interface - Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. - $EN_DIS -**/ - UINT8 PchLockDownBiosInterface; - -/** Offset 0x0C48 - Unlock all GPIO pads - Force all GPIO pads to be unlocked for debug purpose. - $EN_DIS -**/ - UINT8 PchUnlockGpioPads; - -/** Offset 0x0C49 - PCH Unlock SideBand access - The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before - 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. - $EN_DIS -**/ - UINT8 PchSbAccessUnlock; - -/** Offset 0x0C4A - PCIE RP Ltr Max Snoop Latency - Latency Tolerance Reporting, Max Snoop Latency. -**/ - UINT16 PcieRpLtrMaxSnoopLatency[24]; - -/** Offset 0x0C7A - PCIE RP Ltr Max No Snoop Latency - Latency Tolerance Reporting, Max Non-Snoop Latency. -**/ - UINT16 PcieRpLtrMaxNoSnoopLatency[24]; - -/** Offset 0x0CAA - PCIE RP Snoop Latency Override Mode - Latency Tolerance Reporting, Snoop Latency Override Mode. -**/ - UINT8 PcieRpSnoopLatencyOverrideMode[24]; - -/** Offset 0x0CC2 - PCIE RP Snoop Latency Override Multiplier - Latency Tolerance Reporting, Snoop Latency Override Multiplier. -**/ - UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; - -/** Offset 0x0CDA - PCIE RP Snoop Latency Override Value - Latency Tolerance Reporting, Snoop Latency Override Value. -**/ - UINT16 PcieRpSnoopLatencyOverrideValue[24]; - -/** Offset 0x0D0A - PCIE RP Non Snoop Latency Override Mode - Latency Tolerance Reporting, Non-Snoop Latency Override Mode. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; - -/** Offset 0x0D22 - PCIE RP Non Snoop Latency Override Multiplier - Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; - -/** Offset 0x0D3A - PCIE RP Non Snoop Latency Override Value - Latency Tolerance Reporting, Non-Snoop Latency Override Value. -**/ - UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; - -/** Offset 0x0D6A - PCIE RP Slot Power Limit Scale - Specifies scale used for slot power limit value. Leave as 0 to set to default. -**/ - UINT8 PcieRpSlotPowerLimitScale[24]; - -/** Offset 0x0D82 - PCIE RP Slot Power Limit Value - Specifies upper limit on power supplie by slot. Leave as 0 to set to default. -**/ - UINT16 PcieRpSlotPowerLimitValue[24]; - -/** Offset 0x0DB2 - PCIE RP Enable Port8xh Decode - This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; - 1: Enable. - $EN_DIS -**/ - UINT8 PcieEnablePort8xhDecode; - -/** Offset 0x0DB3 - PCIE Port8xh Decode Port Index - The Index of PCIe Port that is selected for Port8xh Decode (0 Based). -**/ - UINT8 PchPciePort8xhDecodePortIndex; - -/** Offset 0x0DB4 - PCH Energy Reporting - Disable/Enable PCH to CPU energy report feature. - $EN_DIS -**/ - UINT8 PchPmDisableEnergyReport; - -/** Offset 0x0DB5 - PCH Sata Test Mode - Allow entrance to the PCH SATA test modes. - $EN_DIS -**/ - UINT8 SataTestMode; - -/** Offset 0x0DB6 - PCH USB OverCurrent mapping lock enable - If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning - that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. - $EN_DIS -**/ - UINT8 PchXhciOcLock; - -/** Offset 0x0DB7 - LpmStateEnableMask -**/ - UINT8 LpmStateEnableMask; - -/** Offset 0x0DB8 - Mctp Broadcast Cycle - Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 MctpBroadcastCycle; - -/** Offset 0x0DB9 -**/ - UINT8 UnusedUpdSpace30[1]; - -/** Offset 0x0DBA - PCIE RP Ltr Max Snoop Latency - Latency Tolerance Reporting, Max Snoop Latency. -**/ - UINT16 CpuPcieRpLtrMaxSnoopLatency[4]; - -/** Offset 0x0DC2 - PCIE RP Ltr Max No Snoop Latency - Latency Tolerance Reporting, Max Non-Snoop Latency. -**/ - UINT16 CpuPcieRpLtrMaxNoSnoopLatency[4]; - -/** Offset 0x0DCA - PCIE RP Snoop Latency Override Mode - Latency Tolerance Reporting, Snoop Latency Override Mode. -**/ - UINT8 CpuPcieRpSnoopLatencyOverrideMode[4]; - -/** Offset 0x0DCE - PCIE RP Snoop Latency Override Multiplier - Latency Tolerance Reporting, Snoop Latency Override Multiplier. -**/ - UINT8 CpuPcieRpSnoopLatencyOverrideMultiplier[4]; - -/** Offset 0x0DD2 - PCIE RP Snoop Latency Override Value - Latency Tolerance Reporting, Snoop Latency Override Value. -**/ - UINT16 CpuPcieRpSnoopLatencyOverrideValue[4]; - -/** Offset 0x0DDA - PCIE RP Non Snoop Latency Override Mode - Latency Tolerance Reporting, Non-Snoop Latency Override Mode. -**/ - UINT8 CpuPcieRpNonSnoopLatencyOverrideMode[4]; - -/** Offset 0x0DDE - PCIE RP Non Snoop Latency Override Multiplier - Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. -**/ - UINT8 CpuPcieRpNonSnoopLatencyOverrideMultiplier[4]; - -/** Offset 0x0DE2 - PCIE RP Non Snoop Latency Override Value - Latency Tolerance Reporting, Non-Snoop Latency Override Value. -**/ - UINT16 CpuPcieRpNonSnoopLatencyOverrideValue[4]; - -/** Offset 0x0DEA - PCIE RP Upstream Port Transmiter Preset - Used during Gen3 Link Equalization. Used for all lanes. Default is 7. -**/ - UINT8 CpuPcieRpGen3Uptp[4]; - -/** Offset 0x0DEE - PCIE RP Downstream Port Transmiter Preset - Used during Gen3 Link Equalization. Used for all lanes. Default is 7. -**/ - UINT8 CpuPcieRpGen3Dptp[4]; - -/** Offset 0x0DF2 - PCIE RP Upstream Port Transmiter Preset - Used during Gen4 Link Equalization. Used for all lanes. Default is 8. -**/ - UINT8 CpuPcieRpGen4Uptp[4]; - -/** Offset 0x0DF6 - PCIE RP Downstream Port Transmiter Preset - Used during Gen4 Link Equalization. Used for all lanes. Default is 9. -**/ - UINT8 CpuPcieRpGen4Dptp[4]; - -/** Offset 0x0DFA - PMC C10 dynamic threshold dajustment enable - Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs - $EN_DIS -**/ - UINT8 PmcC10DynamicThresholdAdjustment; - -/** Offset 0x0DFB - FOMS Control Policy - Choose the Foms Control Policy, <b>Default = 0 </b> - 0: Auto, 1: Gen3 Foms, 2: Gen4 Foms, 3: Gen3 and Gen4 Foms -**/ - UINT8 CpuPcieFomsCp[4]; - -/** Offset 0x0DFF -**/ - UINT8 UnusedUpdSpace31; - -/** Offset 0x0E00 - LogoPixelHeight Address - Address of LogoPixelHeight -**/ - UINT32 LogoPixelHeight; - -/** Offset 0x0E04 - LogoPixelWidth Address - Address of LogoPixelWidth -**/ - UINT32 LogoPixelWidth; - -/** Offset 0x0E08 - P2P mode for PCIE RP - Enable/disable peer to peer mode for PCIE Root Ports. 0: Disable, 1: Enable. - 0: Disable, 1: Enable -**/ - UINT8 CpuPcieRpPeerToPeerMode[4]; - -/** Offset 0x0E0C - Map port under VMD - Map/UnMap port under VMD - $EN_DIS -**/ - UINT8 VmdPort[31]; - -/** Offset 0x0E2B - VMD Port Device - VMD Root port device number. -**/ - UINT8 VmdPortDev[31]; - -/** Offset 0x0E4A - VMD Port Func - VMD Root port function number. -**/ - UINT8 VmdPortFunc[31]; - -/** Offset 0x0E69 -**/ - UINT8 UnusedUpdSpace32[3]; - -/** Offset 0x0E6C - VMD Variable - VMD Variable Pointer. -**/ - UINT32 VmdVariablePtr; - -/** Offset 0x0E70 - Thermal Design Current time window - PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. - Range 1ms to 448s -**/ - UINT32 TdcTimeWindow1[5]; - -/** Offset 0x0E84 - Temporary CfgBar address for VMD - PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. - Range 1ms to 448s -**/ - UINT32 VmdCfgBarBase; - -/** Offset 0x0E88 - Temporary MemBar1 address for VMD - PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. - Range 1ms to 448s -**/ - UINT32 VmdMemBar1Base; - -/** Offset 0x0E8C - Temporary MemBar2 address for VMD - PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. - Range 1ms to 448s -**/ - UINT32 VmdMemBar2Base; - -/** Offset 0x0E90 - PCH TSN1 MAC Address High Bits - Set TSN1 MAC Address High. -**/ - UINT32 PchTsn1MacAddressHigh; - -/** Offset 0x0E94 - PCH TSN1 MAC Address Low Bits - Set TSN1 MAC Address Low. -**/ - UINT32 PchTsn1MacAddressLow; - -/** Offset 0x0E98 - FspEventHandler - <b>Optional</b> pointer to the boot loader's implementation of FSP_EVENT_HANDLER. -**/ - UINT32 FspEventHandler; - -/** Offset 0x0E9C - Enable VMD Global Mapping - Enable/disable to VMD controller.0: Disable(Default); 1: Enable - $EN_DIS -**/ - UINT8 VmdGlobalMapping; - -/** Offset 0x0E9D - PCH XHCI LTR Mode Enable - Enable/Disable PCH XHCI LTR Mode.0: Disable; 1: Enable(Default). - $EN_DIS -**/ - UINT8 PchXhciLtrModeEnable; - -/** Offset 0x0E9E -**/ - UINT8 UnusedUpdSpace33[3]; - -/** Offset 0x0EA1 -**/ - UINT8 ReservedFspsUpd[7]; -} FSP_S_CONFIG; - -/** Fsp S UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSP_S_CONFIG FspsConfig; - -/** Offset 0x0EA8 -**/ - UINT8 UnusedUpdSpace34[6]; - -/** Offset 0x0EAE -**/ - UINT16 UpdTerminator; -} FSPS_UPD; - -#pragma pack() - -#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/MemInfoHob.h deleted file mode 100644 index 07de7d7f5a..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/MemInfoHob.h +++ /dev/null @@ -1,290 +0,0 @@ -/** @file - This file contains definitions required for creation of - Memory S3 Save data, Memory Info data and Memory Platform - data hobs. - - @copyright - Copyright (c) 1999 - 2019, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials are licensed and made available under - the terms and conditions of the BSD License that accompanies this distribution. - The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php. - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -@par Specification Reference: -**/ -#ifndef _MEM_INFO_HOB_H_ -#define _MEM_INFO_HOB_H_ - -#include <Uefi/UefiMultiPhase.h> -#include <Pi/PiBootMode.h> -#include <Pi/PiHob.h> - -#pragma pack (push, 1) - -extern EFI_GUID gSiMemoryS3DataGuid; -extern EFI_GUID gSiMemoryInfoDataGuid; -extern EFI_GUID gSiMemoryPlatformDataGuid; - -#define MAX_TRACE_CACHE_TYPE 3 - -#define MAX_NODE 2 -#define MAX_CH 4 -#define MAX_DIMM 2 - -/// -/// Host reset states from MRC. -/// -#define WARM_BOOT 2 - -#define R_MC_CHNL_RANK_PRESENT 0x7C -#define B_RANK0_PRS BIT0 -#define B_RANK1_PRS BIT1 -#define B_RANK2_PRS BIT4 -#define B_RANK3_PRS BIT5 - -// @todo remove and use the MdePkg\Include\Pi\PiHob.h -#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) -#ifndef __HOB__H__ -typedef struct _EFI_HOB_GENERIC_HEADER { - UINT16 HobType; - UINT16 HobLength; - UINT32 Reserved; -} EFI_HOB_GENERIC_HEADER; - -typedef struct _EFI_HOB_GUID_TYPE { - EFI_HOB_GENERIC_HEADER Header; - EFI_GUID Name; - /// - /// Guid specific data goes here - /// -} EFI_HOB_GUID_TYPE; -#endif -#endif - -/// -/// Defines taken from MRC so avoid having to include MrcInterface.h -/// - -// -// Matches MAX_SPD_SAVE define in MRC -// -#ifndef MAX_SPD_SAVE -#define MAX_SPD_SAVE 29 -#endif - -// -// MRC version description. -// -typedef struct { - UINT8 Major; ///< Major version number - UINT8 Minor; ///< Minor version number - UINT8 Rev; ///< Revision number - UINT8 Build; ///< Build number -} SiMrcVersion; - -// -// Matches MrcChannelSts enum in MRC -// -#ifndef CHANNEL_NOT_PRESENT -#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. -#endif -#ifndef CHANNEL_DISABLED -#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. -#endif -#ifndef CHANNEL_PRESENT -#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. -#endif - -// -// Matches MrcDimmSts enum in MRC -// -#ifndef DIMM_ENABLED -#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. -#endif -#ifndef DIMM_DISABLED -#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. -#endif -#ifndef DIMM_PRESENT -#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. -#endif -#ifndef DIMM_NOT_PRESENT -#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. -#endif - -// -// Matches MrcBootMode enum in MRC -// -#ifndef __MRC_BOOT_MODE__ -#define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h - #ifndef INT32_MAX - #define INT32_MAX (0x7FFFFFFF) - #endif //INT32_MAX -typedef enum { - bmCold, ///< Cold boot - bmWarm, ///< Warm boot - bmS3, ///< S3 resume - bmFast, ///< Fast boot - MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value. - MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI. -} MRC_BOOT_MODE; -#endif //__MRC_BOOT_MODE__ - -// -// Matches MrcDdrType enum in MRC -// -#ifndef MRC_DDR_TYPE_DDR4 -#define MRC_DDR_TYPE_DDR4 0 -#endif -#ifndef MRC_DDR_TYPE_DDR3 -#define MRC_DDR_TYPE_DDR3 1 -#endif -#ifndef MRC_DDR_TYPE_LPDDR3 -#define MRC_DDR_TYPE_LPDDR3 2 -#endif -#ifndef MRC_DDR_TYPE_LPDDR4 -#define MRC_DDR_TYPE_LPDDR4 3 -#endif -#ifndef MRC_DDR_TYPE_WIO2 -#define MRC_DDR_TYPE_WIO2 4 -#endif -#ifndef MRC_DDR_TYPE_UNKNOWN -#define MRC_DDR_TYPE_UNKNOWN 5 -#endif - -#define MAX_PROFILE_NUM 4 // number of memory profiles supported -#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported - -// -// DIMM timings -// -typedef struct { - UINT32 tCK; ///< Memory cycle time, in femtoseconds. - UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. - UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. - UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. - UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. - UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. - UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. - UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. - UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. - UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. - UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. - UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. - UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. - UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. - UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. - UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. - UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. - UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. - UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. - UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. - UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. - UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. -} MRC_CH_TIMING; - -/// -/// Memory SMBIOS & OC Memory Data Hob -/// -typedef struct { - UINT8 Status; ///< See MrcDimmStatus for the definition of this field. - UINT8 DimmId; - UINT32 DimmCapacity; ///< DIMM size in MBytes. - UINT16 MfgId; - UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes - UINT8 RankInDimm; ///< The number of ranks in this DIMM. - UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. - UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. - UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. - UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. - UINT16 Speed; ///< The maximum capable speed of the device, in MHz - UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation. -} DIMM_INFO; - -typedef struct { - UINT8 Status; ///< Indicates whether this channel should be used. - UINT8 ChannelId; - UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. - MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. - DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. -} CHANNEL_INFO; - -typedef struct { - UINT8 Status; ///< Indicates whether this controller should be used. - UINT16 DeviceId; ///< The PCI device id of this memory controller. - UINT8 RevisionId; ///< The PCI revision id of this memory controller. - UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. - CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. -} CONTROLLER_INFO; - -typedef struct { - UINT64 BaseAddress; ///< Trace Base Address - UINT64 TotalSize; ///< Total Trace Region of Same Cache type - UINT8 CacheType; ///< Trace Cache Type - UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code - UINT8 Rsvd[2]; -} PSMI_MEM_INFO; - -typedef struct { - UINT8 Revision; - UINT16 DataWidth; ///< Data width, in bits, of this memory device - /** As defined in SMBIOS 3.0 spec - Section 7.18.2 and Table 75 - **/ - UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 - UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) - UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) - /** As defined in SMBIOS 3.0 spec - Section 7.17.3 and Table 72 - **/ - UINT8 ErrorCorrectionType; - - SiMrcVersion Version; - BOOLEAN EccSupport; - UINT8 MemoryProfile; - UINT32 TotalPhysicalMemorySize; - UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. - UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. - UINT8 Ratio; - UINT8 RefClk; - UINT32 VddVoltage[MAX_PROFILE_NUM]; - CONTROLLER_INFO Controller[MAX_NODE]; -} MEMORY_INFO_DATA_HOB; - -/** - Memory Platform Data Hob - - <b>Revision 1:</b> - - Initial version. - <b>Revision 2:</b> - - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields -**/ -typedef struct { - UINT8 Revision; - UINT8 Reserved[3]; - UINT32 BootMode; - UINT32 TsegSize; - UINT32 TsegBase; - UINT32 PrmrrSize; - UINT64 PrmrrBase; - UINT32 PramSize; - UINT64 PramBase; - UINT64 DismLimit; - UINT64 DismBase; - UINT32 GttBase; - UINT32 MmioSize; - UINT32 PciEBaseAddress; - PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE]; -} MEMORY_PLATFORM_DATA; - -typedef struct { - EFI_HOB_GUID_TYPE EfiHobGuidType; - MEMORY_PLATFORM_DATA Data; - UINT8 *Buffer; -} MEMORY_PLATFORM_DATA_HOB; - -#pragma pack (pop) - -#endif // _MEM_INFO_HOB_H_ |