diff options
4 files changed, 334 insertions, 18 deletions
diff --git a/src/mainboard/google/dedede/Kconfig.name b/src/mainboard/google/dedede/Kconfig.name index cfb4186d2f..10cf5e2805 100644 --- a/src/mainboard/google/dedede/Kconfig.name +++ b/src/mainboard/google/dedede/Kconfig.name @@ -205,6 +205,9 @@ config BOARD_GOOGLE_SHOTZO config BOARD_GOOGLE_TARANZA bool "-> Taranza" select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50 + select RT8168_GEN_ACPI_POWER_RESOURCE + select RT8168_GET_MAC_FROM_VPD + select RT8168_SET_LED_MODE config BOARD_GOOGLE_BOXY bool "-> Boxy" diff --git a/src/mainboard/google/dedede/variants/taranza/Makefile.inc b/src/mainboard/google/dedede/variants/taranza/Makefile.inc new file mode 100644 index 0000000000..eb2c9bc021 --- /dev/null +++ b/src/mainboard/google/dedede/variants/taranza/Makefile.inc @@ -0,0 +1,3 @@ +## SPDX-License-Identifier: GPL-2.0-or-later + +ramstage-y += gpio.c diff --git a/src/mainboard/google/dedede/variants/taranza/gpio.c b/src/mainboard/google/dedede/variants/taranza/gpio.c new file mode 100644 index 0000000000..89a7a77feb --- /dev/null +++ b/src/mainboard/google/dedede/variants/taranza/gpio.c @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> + +/* Pad configuration in ramstage */ +static const struct pad_config gpio_table[] = { + /* A11 : TOUCH_RPT_EN */ + PAD_NC(GPP_A11, NONE), + /* A12 : USB_OC1_N */ + PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1), + /* A13 : USB_OC2_N */ + PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), + /* A14 : USB_OC3_N */ + PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1), + /* A18 : USB_OC0_N */ + PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), + + /* B9 : LAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), + + /* D2 : PWM_PP3300_BUZZER */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* D4 : LAN_PE_ISOLATE_ODL_R */ + PAD_CFG_GPO(GPP_D4, 1, DEEP), + /* D5 : TOUCH_RESET_L */ + PAD_NC(GPP_D5, NONE), + /* D6 : EN_PP3300_TOUCH_S0 */ + PAD_NC(GPP_D6, NONE), + /* D17 : LAN_PERST_L */ + PAD_CFG_GPO(GPP_D17, 1, PLTRST), + /* D19 : WWAN_WLAN_COEX1 */ + PAD_NC(GPP_D19, NONE), + /* D20 : WWAN_WLAN_COEX2 */ + PAD_NC(GPP_D20, NONE), + + /* E13 : GPP_E13/DDI0_DDC_SCL */ + PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), + /* E14 : GPP_E14/DDI0_DDC_SDA */ + PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), + /* E15 : GPP_E15/DDI1_DDC_SCL */ + PAD_CFG_NF(GPP_E15, NONE, DEEP, NF1), + /* E16 : GPP_E16/DDI1_DDC_SDA */ + PAD_CFG_NF(GPP_E16, NONE, DEEP, NF1), + + /* G0 : SD_CMD */ + PAD_NC(GPP_G0, NONE), + /* G1 : SD_DATA0 */ + PAD_NC(GPP_G1, NONE), + /* G2 : SD_DATA1 */ + PAD_NC(GPP_G2, NONE), + /* G3 : SD_DATA2 */ + PAD_NC(GPP_G3, NONE), + /* G4 : SD_DATA3 */ + PAD_NC(GPP_G4, NONE), + /* G5 : SD_CD_ODL */ + PAD_NC(GPP_G5, NONE), + /* G6 : SD_CLK */ + PAD_NC(GPP_G6, NONE), + /* G7 : SD_SDIO_WP */ + PAD_NC(GPP_G7, NONE), + + /* H4 : AP_I2C_TS_SDA */ + PAD_NC(GPP_H4, NONE), + /* H5 : AP_I2C_TS_SCL */ + PAD_NC(GPP_H5, NONE), + /* H6 : AP_I2C_CAM_SDA */ + PAD_NC(GPP_H6, NONE), + /* H7 : AP_I2C_CAM_SCL */ + PAD_NC(GPP_H7, NONE), + /* H15 : I2S_SPK_BCLK */ + PAD_NC(GPP_H15, NONE), + + /* R6 : I2S_SPK_LRCK */ + PAD_NC(GPP_R6, NONE), + /* R7 : I2S_SPK_AUDIO */ + PAD_NC(GPP_R7, NONE), + + /* S2 : DMIC1_CLK */ + PAD_NC(GPP_S2, NONE), + /* S3 : DMIC1_DATA */ + PAD_NC(GPP_S3, NONE), + /* S6 : DMIC0_CLK */ + PAD_NC(GPP_S6, NONE), + /* S7 : DMIC0_DATA */ + PAD_NC(GPP_S7, NONE), +}; + +const struct pad_config *variant_override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} diff --git a/src/mainboard/google/dedede/variants/taranza/overridetree.cb b/src/mainboard/google/dedede/variants/taranza/overridetree.cb index 404024b1d6..e3df1f2d17 100644 --- a/src/mainboard/google/dedede/variants/taranza/overridetree.cb +++ b/src/mainboard/google/dedede/variants/taranza/overridetree.cb @@ -8,10 +8,6 @@ chip soc/intel/jasperlake #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | - #| I2C0 | Trackpad | - #| I2C1 | Digitizer | - #| I2C2 | Touchscreen | - #| I2C3 | Camera | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ @@ -19,24 +15,245 @@ chip soc/intel/jasperlake .speed_mhz = 1, .early_init = 1, }, - .i2c[0] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[1] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[2] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[3] = { - .speed = I2C_SPEED_FAST, - }, .i2c[4] = { - .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 40, + } }, }" + # Enable Root Port 3 (index 2) for LAN + # External PCIe port 7 is mapped to PCIe Root Port 3 + register "PcieRpEnable[2]" = "1" + register "PcieClkSrcUsage[4]" = "2" + + # Enable Root Port 7 (index 6) for WLAN + # External PCIe port 3 is mapped to PCIe Root Port 7 + register "PcieRpEnable[6]" = "1" + register "PcieClkSrcUsage[3]" = "6" + + # Disable PCIe Root Port 8 + register "PcieRpEnable[7]" = "0" + + # Audio related configurations + register "PchHdaAudioLinkDmicEnable[0]" = "0" + register "PchHdaAudioLinkDmicEnable[1]" = "0" + + # Disable SD card + register "sdcard_cd_gpio" = "0" + register "SdCardPowerEnableActiveHigh" = "0" + + # Disable eDP on port A + register "DdiPortAConfig" = "0" + + # Enable HPD and DDC for DDI port A + register "DdiPortAHpd" = "1" + register "DdiPortADdc" = "1" + + # USB Port Configuration + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-C Port 0 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port A0 + register "usb2_ports[2]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port A1 + register "usb2_ports[3]" = "{ + .enable = 1, + .ocpin = OC3, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port A2 + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_11P25MV, + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, + }" # Type-A Port A3 + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # PL2303 + + register "usb3_ports[1]" = "USB3_PORT_EMPTY" # No USB3/2 Type-C Port C1 + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/1 Type-A Port A2 + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/1 Type-A Port A3 + device domain 0 on - device pci 15.0 on end + device pci 04.0 on + chip drivers/intel/dptf + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 90, 10000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 60000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 15000), + [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 55, 15000) + }" + + ## Critical Policy + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 80, SHUTDOWN) + }" + + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 3000, + .max_power = 6000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 100, + }, + .pl2 = { + .min_power = 20000, + .max_power = 20000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + register "options.tsr[0].desc" = ""Memory"" + register "options.tsr[1].desc" = ""Power"" + register "options.tsr[2].desc" = ""Chassis"" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 3000 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + device generic 0 on end + end + end # SA Thermal device + device pci 14.0 on + chip drivers/usb/acpi + # TODO (b/264960828) verify PLD values + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A0"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A1"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A2"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 4)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A3"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 5)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.0 on end + end + chip drivers/usb/acpi + device usb 3.1 off end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A0"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A1"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 3)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A2"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 4)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A3"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 5)" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 15.0 off end # I2C 0 + device pci 15.1 off end # I2C 1 + device pci 15.2 off end # I2C 2 + device pci 15.3 off end # I2C 3 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""RTL5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end # I2C 4 + device pci 1c.2 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW0_03" # GPP_B3 + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + register "device_index" = "0" + device pci 00.0 on end + end + end # PCI Express Root Port 3 - RTL8111H LAN + device pci 1c.6 on + chip drivers/wifi/generic + register "wake" = "GPE0_DW2_03" + device pci 00.0 on end + end + end # PCI Express Root Port 7 - WLAN + device pci 1c.7 off end # PCI Express Root Port 8 + device pci 1f.3 on end # Intel HDA end end |