summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--targets/tyan/s2850/Config.lb13
-rw-r--r--targets/tyan/s2875/Config.lb241
-rw-r--r--targets/tyan/s2875/ns28756
-rw-r--r--targets/tyan/s2880/Config.lb18
-rw-r--r--targets/tyan/s2881/Config.lb27
-rw-r--r--targets/tyan/s2882/Config.lb35
-rw-r--r--targets/tyan/s2885/Config.lb21
-rw-r--r--targets/tyan/s4880/Config.lb16
-rw-r--r--targets/tyan/s4882/Config.lb14
9 files changed, 336 insertions, 55 deletions
diff --git a/targets/tyan/s2850/Config.lb b/targets/tyan/s2850/Config.lb
index b9e994b3ac..02e17e21c7 100644
--- a/targets/tyan/s2850/Config.lb
+++ b/targets/tyan/s2850/Config.lb
@@ -65,7 +65,7 @@ uses HAVE_HARD_RESET
#
#uses CONFIG_LSI_SCSI_FW_FIXUP
-option HAVE_HARD_RESET=0
+option HAVE_HARD_RESET=1
option HAVE_OPTION_TABLE=1
option HAVE_MP_TABLE=1
@@ -136,7 +136,8 @@ option MAINBOARD_VENDOR="Tyan"
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
#option FALLBACK_SIZE=524288
-option FALLBACK_SIZE=98304
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
option ROM_IMAGE_SIZE=65536
@@ -170,7 +171,7 @@ option TTYS0_BAUD=115200
## Request this level of debugging output
option DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=9
+option MAXIMUM_CONSOLE_LOGLEVEL=8
option DEBUG=1
@@ -216,7 +217,8 @@ romimage "normal"
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2850
- payload ../../tg3--ide_disk.zelf
+# payload ../../tg3--ide_disk_dev.zelf
+ payload ../../eepro100--ide_diskx.zelf
end
romimage "fallback"
@@ -233,7 +235,8 @@ romimage "fallback"
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2850
- payload ../../tg3--ide_disk.zelf
+# payload ../../tg3--ide_disk_dev.zelf
+ payload ../../eepro100--ide_diskx.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2875/Config.lb b/targets/tyan/s2875/Config.lb
new file mode 100644
index 0000000000..5d7bee9f19
--- /dev/null
+++ b/targets/tyan/s2875/Config.lb
@@ -0,0 +1,241 @@
+# Sample config file for
+# the Tyan s2875
+# This will make a target directory of ./s2875
+
+loadoptions
+
+target s2875
+
+uses ARCH
+uses CONFIG_COMPRESS
+uses CONFIG_IOAPIC
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_SMP
+uses CONFIG_UDELAY_TSC
+uses CPU_FIXUP
+uses FALLBACK_SIZE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses i586
+uses i686
+uses INTEL_PPRO_MTRR
+uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
+uses k7
+uses k8
+uses MAINBOARD
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+#uses MEMORY_HOLE
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SECTION_SIZE
+uses ROM_SIZE
+uses STACK_SIZE
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses HAVE_OPTION_TABLE
+uses CONFIG_CHIP_CONFIGURE
+
+uses CONFIG_CONSOLE_SERIAL8250
+uses TTYS0_BAUD
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses DEBUG
+uses CONFIG_MAX_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses LINUXBIOS_EXTRA_VERSION
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_HARD_RESET
+
+#uses CONFIG_VGABIOS
+#uses CONFIG_REALMODE_IDT
+#uses CONFIG_PCIBIOS
+#uses VGABIOS_START
+#uses SCSIFW_START
+
+#
+#uses CONFIG_LSI_SCSI_FW_FIXUP
+
+option HAVE_OPTION_TABLE=1
+option HAVE_MP_TABLE=1
+option CPU_FIXUP=1
+option CONFIG_UDELAY_TSC=0
+option i686=1
+option i586=1
+option INTEL_PPRO_MTRR=1
+option k7=1
+option k8=1
+option ROM_SIZE=524288
+
+#option CONFIG_VGABIOS=1
+#option CONFIG_REALMODE_IDT=1
+#option CONFIG_PCIBIOS=1
+#option VGABIOS_START=1
+#option SCSIFW_START=0xfff80000
+
+
+option HAVE_FALLBACK_BOOT=1
+
+# use the new chip configure code.
+
+option CONFIG_CHIP_CONFIGURE=1
+#option CONFIG_LSI_SCSI_FW_FIXUP=1
+
+
+option HAVE_HARD_RESET=1
+
+###
+### Build code to export a programmable irq routing table
+###
+option HAVE_PIRQ_TABLE=1
+option IRQ_SLOT_COUNT=13
+#
+###
+### Build code for SMP support
+### Only worry about 2 micro processors
+###
+option CONFIG_SMP=1
+option CONFIG_MAX_CPUS=2
+option CONFIG_LOGICAL_CPUS=0
+option CONFIG_MAX_PHYSICAL_CPUS=2
+#
+###
+### Build code to setup a generic IOAPIC
+###
+option CONFIG_IOAPIC=1
+#
+###
+### MEMORY_HOLE instructs earlymtrr.inc to
+### enable caching from 0-640KB and to disable
+### caching from 640KB-1MB using fixed MTRRs
+###
+### Enabling this option breaks SMP because secondary
+### CPU identification depends on only variable MTRRs
+### being enabled.
+###
+#option MEMORY_HOLE=0
+#
+###
+### Clean up the motherboard id strings
+###
+option MAINBOARD_PART_NUMBER="S2875"
+option MAINBOARD_VENDOR="Tyan"
+#
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+#option FALLBACK_SIZE=524288
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+option ROM_IMAGE_SIZE=65536
+
+
+###
+### Compute where this copy of linuxBIOS will start in the boot rom
+###
+#
+###
+
+## We do use compressed image
+option CONFIG_COMPRESS=1
+
+option CONFIG_CONSOLE_SERIAL8250=1
+option TTYS0_BAUD=115200
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+option DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+option MAXIMUM_CONSOLE_LOGLEVEL=8
+
+option DEBUG=1
+
+#
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x004000
+
+##
+## Use a 32K stack
+##
+option STACK_SIZE=0x8000
+
+##
+## Use a 56K heap
+##
+option HEAP_SIZE=0xe000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+option CONFIG_ROM_STREAM = 1
+
+#
+#
+romimage "normal"
+# 48K for SCSI FW
+# option ROM_SIZE = 475136
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+ option USE_FALLBACK_IMAGE=0
+ option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
+ option ROM_SECTION_OFFSET= 0
+
+ option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+ option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+ option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
+
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
+ option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+
+ mainboard tyan/s2875
+ payload ../../e1000--ide_disk.zelf
+end
+
+romimage "fallback"
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+ option USE_FALLBACK_IMAGE=1
+ option ROM_SECTION_SIZE = FALLBACK_SIZE
+ option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
+
+ option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+ option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+ option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
+
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
+ option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+
+ mainboard tyan/s2875
+ payload ../../e1000--ide_disk.zelf
+# payload ../../filo.elf.d
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2875/ns2875 b/targets/tyan/s2875/ns2875
new file mode 100644
index 0000000000..3d694ba314
--- /dev/null
+++ b/targets/tyan/s2875/ns2875
@@ -0,0 +1,6 @@
+#!/bin/bash
+TYANMB=s2875
+cd "$TYANMB"
+make
+cat ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
+cp -f $TYANMB"_linuxbios.rom" /home/yhlu/
diff --git a/targets/tyan/s2880/Config.lb b/targets/tyan/s2880/Config.lb
index 3525475368..b0de50850a 100644
--- a/targets/tyan/s2880/Config.lb
+++ b/targets/tyan/s2880/Config.lb
@@ -137,7 +137,8 @@ option MAINBOARD_VENDOR="Tyan"
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
#option FALLBACK_SIZE=524288
-option FALLBACK_SIZE=98304
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
option ROM_IMAGE_SIZE=65536
@@ -181,14 +182,14 @@ option DEBUG=1
option _RAMBASE=0x004000
##
-## Use a 128K stack
+## Use a 32K stack
##
-option STACK_SIZE=0x4000
+option STACK_SIZE=0x8000
##
-## Use a 256K heap + 128
+## Use a 56K heap
##
-option HEAP_SIZE=0xa000
+option HEAP_SIZE=0xe000
#
###
@@ -213,7 +214,9 @@ romimage "normal"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
+
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2880
@@ -230,7 +233,8 @@ romimage "fallback"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2880
diff --git a/targets/tyan/s2881/Config.lb b/targets/tyan/s2881/Config.lb
index be6e6d85d0..4b2c8af8a8 100644
--- a/targets/tyan/s2881/Config.lb
+++ b/targets/tyan/s2881/Config.lb
@@ -136,7 +136,8 @@ option MAINBOARD_VENDOR="Tyan"
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
#option FALLBACK_SIZE=524288
-option FALLBACK_SIZE=98304
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
option ROM_IMAGE_SIZE=65536
@@ -180,14 +181,14 @@ option DEBUG=1
option _RAMBASE=0x004000
##
-## Use a 128K stack
+## Use a 32K stack
##
-option STACK_SIZE=0x4000
+option STACK_SIZE=0x8000
##
-## Use a 256K heap + 64
+## Use a 56K heap
##
-option HEAP_SIZE=0xa000
+option HEAP_SIZE=0xe000
#
###
@@ -202,7 +203,9 @@ romimage "normal"
# 48K for SCSI FW
# option ROM_SIZE = 475136
# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+ option ROM_SIZE = 458752
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
option USE_FALLBACK_IMAGE=0
option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
@@ -212,11 +215,13 @@ romimage "normal"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2881
- payload ../../tg3--ide_disk.zelf
+# payload ../../../payloads/tg3--ide_disk.zelf
+ payload ../../../payloads/filo.elf
end
romimage "fallback"
@@ -229,11 +234,13 @@ romimage "fallback"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2881
- payload ../../tg3--ide_disk.zelf
+# payload ../../../payloads/tg3--ide_disk.zelf
+ payload ../../../payloads/filo_mem.elf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2882/Config.lb b/targets/tyan/s2882/Config.lb
index 258e7f1158..69da1350e1 100644
--- a/targets/tyan/s2882/Config.lb
+++ b/targets/tyan/s2882/Config.lb
@@ -41,7 +41,8 @@ uses USE_FALLBACK_IMAGE
uses USE_OPTION_TABLE
uses HAVE_OPTION_TABLE
uses CONFIG_CHIP_CONFIGURE
-
+
+uses CONFIG_CONSOLE_BTEXT
uses CONFIG_CONSOLE_SERIAL8250
uses TTYS0_BAUD
#SMDC Support
@@ -81,6 +82,7 @@ option ROM_SIZE=524288
option HAVE_HARD_RESET=1
+option CONFIG_CONSOLE_BTEXT=1
#option CONFIG_VGABIOS=1
#option CONFIG_REALMODE_IDT=1
#option CONFIG_PCIBIOS=1
@@ -137,7 +139,8 @@ option MAINBOARD_VENDOR="Tyan"
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
#option FALLBACK_SIZE=524288
-option FALLBACK_SIZE=98304
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
option ROM_IMAGE_SIZE=65536
@@ -174,9 +177,9 @@ option TTYS0_BAUD=115200
## SPEW 9 Way too many details
## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=8
+option DEFAULT_CONSOLE_LOGLEVEL=7
## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=8
+option MAXIMUM_CONSOLE_LOGLEVEL=7
option DEBUG=1
@@ -186,14 +189,14 @@ option DEBUG=1
option _RAMBASE=0x004000
##
-## Use a 128K stack
+## Use a 32K stack
##
-option STACK_SIZE=0x4000
+option STACK_SIZE=0x8000
##
-## Use a 256K heap + 128
+## Use a 56K heap
##
-option HEAP_SIZE=0xa000
+option HEAP_SIZE=0xe000
#
###
@@ -209,6 +212,8 @@ romimage "normal"
# option ROM_SIZE = 475136
# 48K for SCSI FW and 48K for ATI ROM
# option ROM_SIZE = 425984
+# 64K for Etherboot
+ option ROM_SIZE = 458752
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
option USE_FALLBACK_IMAGE=0
option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
@@ -218,11 +223,14 @@ romimage "normal"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2882
- payload ../../tg3--ide_disk.zelf
+# payload ../../../payloads/tg3--ide_disk.zelf
+# payload ../../../payloads/filo.elf
+ payload ../../../payloads/filo_mem_btext.elf
# SMDC support
# payload ../../tg3--ide_disk_com1_2.zelf
end
@@ -237,11 +245,14 @@ romimage "fallback"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2882
- payload ../../tg3--ide_disk.zelf
+# payload ../../../payloads/tg3--ide_disk.zelf
+# payload ../../../payloads/filo_mem.elf
+ payload ../../../payloads/filo_mem_btext.elf
#SMDC support
# payload ../../tg3--ide_disk_com1_2.zelf
end
diff --git a/targets/tyan/s2885/Config.lb b/targets/tyan/s2885/Config.lb
index 6f313264a2..e5ba9c8fb1 100644
--- a/targets/tyan/s2885/Config.lb
+++ b/targets/tyan/s2885/Config.lb
@@ -179,12 +179,12 @@ option DEBUG=1
option _RAMBASE=0x004000
##
-## Use a 128K stack + 128
+## Use a 32K stack
##
option STACK_SIZE=0x8000
##
-## Use a 256K heap + 128 + 64
+## Use a 56K heap
##
option HEAP_SIZE=0xe000
@@ -201,7 +201,9 @@ romimage "normal"
# 48K for SCSI FW
# option ROM_SIZE = 475136
# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+ option ROM_SIZE = 458752
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
option USE_FALLBACK_IMAGE=0
option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
@@ -211,11 +213,13 @@ romimage "normal"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2885
- payload ../../tg3--ide_disk.zelf
+# payload ../../../payloads/tg3--ide_disk.zelf
+ payload ../../../payloads/filo_mem.elf
end
romimage "fallback"
@@ -228,12 +232,13 @@ romimage "fallback"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s2885
- payload ../../tg3--ide_disk.zelf
-# payload ../../filo.elf.d
+# payload ../../../payloads/tg3--ide_disk.zelf
+ payload ../../../payloads/filo_mem.elf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s4880/Config.lb b/targets/tyan/s4880/Config.lb
index 6cca9e6fa6..114cfcaab3 100644
--- a/targets/tyan/s4880/Config.lb
+++ b/targets/tyan/s4880/Config.lb
@@ -169,9 +169,9 @@ option TTYS0_BAUD=115200
## SPEW 9 Way too many details
## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=8
+option DEFAULT_CONSOLE_LOGLEVEL=7
## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=8
+option MAXIMUM_CONSOLE_LOGLEVEL=7
option DEBUG=1
@@ -181,14 +181,14 @@ option DEBUG=1
option _RAMBASE=0x004000
##
-## Use a 256K stack
+## Use a 32K stack
##
option STACK_SIZE=0x8000
##
-## Use a 384K heap
+## Use a 56K heap
##
-option HEAP_SIZE=0xc000
+option HEAP_SIZE=0xe000
#
###
@@ -213,7 +213,8 @@ romimage "normal"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s4880
@@ -230,7 +231,8 @@ romimage "fallback"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s4880
diff --git a/targets/tyan/s4882/Config.lb b/targets/tyan/s4882/Config.lb
index 34f3080c95..65a09cfa98 100644
--- a/targets/tyan/s4882/Config.lb
+++ b/targets/tyan/s4882/Config.lb
@@ -181,14 +181,14 @@ option DEBUG=1
option _RAMBASE=0x004000
##
-## Use a 256K stack
+## Use a 32K stack
##
-option STACK_SIZE=0x4000
+option STACK_SIZE=0x8000
##
-## Use a 384K heap
+## Use a 56K heap
##
-option HEAP_SIZE=0xa000
+option HEAP_SIZE=0xe000
#
###
@@ -213,7 +213,8 @@ romimage "normal"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s4882
@@ -230,7 +231,8 @@ romimage "fallback"
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
- option XIP_ROM_SIZE = FALLBACK_SIZE
+# option XIP_ROM_SIZE = FALLBACK_SIZE
+ option XIP_ROM_SIZE = 65536
option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
mainboard tyan/s4882
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 09:13:50 +0000