diff options
44 files changed, 104 insertions, 395 deletions
diff --git a/src/mainboard/amd/dinar/get_bus_conf.c b/src/mainboard/amd/dinar/get_bus_conf.c index 3104b73cd4..5ab2ddd5b2 100644 --- a/src/mainboard/amd/dinar/get_bus_conf.c +++ b/src/mainboard/amd/dinar/get_bus_conf.c @@ -32,25 +32,6 @@ */ u8 bus_sb700[2]; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* - * HT Chain device num, actually it is unit id base of every ht device in chain, - * assume every chain only have 4 ht device at most - */ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_sb700; - void get_bus_conf(void) { device_t dev; @@ -58,17 +39,14 @@ void get_bus_conf(void) printk(BIOS_DEBUG, "Mainboard - Get_bus_conf.c - get_bus_conf - Start.\n"); - sbdn_sb700 = 0; for (i = 0; i < ARRAY_SIZE(bus_sb700); i++) { bus_sb700[i] = 0; } - bus_sb700[0] = (pci1234x[0] >> 16) & 0xff; - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); diff --git a/src/mainboard/amd/dinar/irq_tables.c b/src/mainboard/amd/dinar/irq_tables.c index 865d264429..8242b4e911 100644 --- a/src/mainboard/amd/dinar/irq_tables.c +++ b/src/mainboard/amd/dinar/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -70,8 +68,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -87,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/dinar/mptable.c b/src/mainboard/amd/dinar/mptable.c index 398ee86f34..d239a7e749 100644 --- a/src/mainboard/amd/dinar/mptable.c +++ b/src/mainboard/amd/dinar/mptable.c @@ -29,8 +29,6 @@ #include <cpu/amd/amdfam15.h> extern u8 bus_sb700[2]; -extern u32 sbdn_sb700; - static void *smp_write_config_table(void *v) { @@ -60,8 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sb700 = CONFIG_MAX_CPUS + 1; apicid_rd890 = apicid_sb700 + 1; - //bus_sb700[0], TODO: why bus_sb700[0] use same value of bus_rd890[0] assigned by get_pci1234(), instead of 0. - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set sb700 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/amd/inagua/get_bus_conf.c b/src/mainboard/amd/inagua/get_bus_conf.c index c688791022..c39decfed7 100644 --- a/src/mainboard/amd/inagua/get_bus_conf.c +++ b/src/mainboard/amd/inagua/get_bus_conf.c @@ -33,17 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { u32 apicid_base; @@ -52,23 +41,20 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); - // bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/inagua/irq_tables.c b/src/mainboard/amd/inagua/irq_tables.c index 98d68d3736..305988b9c5 100644 --- a/src/mainboard/amd/inagua/irq_tables.c +++ b/src/mainboard/amd/inagua/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/olivehill/get_bus_conf.c b/src/mainboard/amd/olivehill/get_bus_conf.c index 508a73cfba..1dda593943 100644 --- a/src/mainboard/amd/olivehill/get_bus_conf.c +++ b/src/mainboard/amd/olivehill/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_yangtze[6]; u32 apicid_yangtze; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_yangtze; - void get_bus_conf(void) { @@ -66,23 +55,20 @@ void get_bus_conf(void) value &= ~(1 << 11); pci_write_config32(dev, 0x60, value); - sbdn_yangtze = 0; memset(bus_yangtze, 0, sizeof(bus_yangtze)); - // bus_yangtze[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_yangtze[0] = (pci1234x[0] >> 16) & 0xff; /* yangtze */ - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_yangtze[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_yangtze[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/olivehill/irq_tables.c b/src/mainboard/amd/olivehill/irq_tables.c index 8dbea45ed4..22ed1ab0a8 100644 --- a/src/mainboard/amd/olivehill/irq_tables.c +++ b/src/mainboard/amd/olivehill/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_yangtze[6]; -extern unsigned long sbdn_yangtze; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_yangtze[0]; - pirq->rtr_devfn = ((sbdn_yangtze + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_yangtze[0], ((sbdn_yangtze + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/parmer/get_bus_conf.c b/src/mainboard/amd/parmer/get_bus_conf.c index 490e3c200d..8dcd4e5593 100644 --- a/src/mainboard/amd/parmer/get_bus_conf.c +++ b/src/mainboard/amd/parmer/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_hudson[6]; u32 apicid_hudson; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; - void get_bus_conf(void) { @@ -56,23 +45,21 @@ void get_bus_conf(void) - sbdn_hudson = 0; memset(bus_hudson, 0, sizeof(bus_hudson)); - bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; /* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/parmer/irq_tables.c b/src/mainboard/amd/parmer/irq_tables.c index 19f800743f..013941ca56 100644 --- a/src/mainboard/amd/parmer/irq_tables.c +++ b/src/mainboard/amd/parmer/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/persimmon/get_bus_conf.c b/src/mainboard/amd/persimmon/get_bus_conf.c index 412744c463..9434429f5a 100644 --- a/src/mainboard/amd/persimmon/get_bus_conf.c +++ b/src/mainboard/amd/persimmon/get_bus_conf.c @@ -35,16 +35,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; u32 apicver_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -54,22 +44,19 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/persimmon/irq_tables.c b/src/mainboard/amd/persimmon/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/amd/persimmon/irq_tables.c +++ b/src/mainboard/amd/persimmon/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/south_station/get_bus_conf.c b/src/mainboard/amd/south_station/get_bus_conf.c index f221a4591f..53c7953f3c 100644 --- a/src/mainboard/amd/south_station/get_bus_conf.c +++ b/src/mainboard/amd/south_station/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -52,16 +42,13 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); @@ -70,7 +57,7 @@ void get_bus_conf(void) } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/south_station/irq_tables.c b/src/mainboard/amd/south_station/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/amd/south_station/irq_tables.c +++ b/src/mainboard/amd/south_station/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/thatcher/get_bus_conf.c b/src/mainboard/amd/thatcher/get_bus_conf.c index b7d6d23d4a..c2dbacd1f4 100644 --- a/src/mainboard/amd/thatcher/get_bus_conf.c +++ b/src/mainboard/amd/thatcher/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_hudson[6]; u32 apicid_hudson; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; - void get_bus_conf(void) { @@ -54,22 +43,20 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_hudson = 0; memset(bus_hudson, 0, sizeof(bus_hudson)); - bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; /* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/thatcher/irq_tables.c b/src/mainboard/amd/thatcher/irq_tables.c index 19f800743f..013941ca56 100644 --- a/src/mainboard/amd/thatcher/irq_tables.c +++ b/src/mainboard/amd/thatcher/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/torpedo/get_bus_conf.c b/src/mainboard/amd/torpedo/get_bus_conf.c index 3f8f50ed99..b88e3fbeb1 100644 --- a/src/mainboard/amd/torpedo/get_bus_conf.c +++ b/src/mainboard/amd/torpedo/get_bus_conf.c @@ -31,26 +31,6 @@ */ u8 bus_sb900[6]; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - -u32 sbdn_sb900; - void get_bus_conf(void) { device_t dev; @@ -58,23 +38,21 @@ void get_bus_conf(void) printk(BIOS_DEBUG, "Mainboard - %s - %s - Start.\n", __FILE__, __func__); - sbdn_sb900 = 0; memset(bus_sb900, 0, sizeof(bus_sb900)); - bus_sb900[0] = (pci1234x[0] >> 16) & 0xff; /* sb900 */ - dev = dev_find_slot(bus_sb900[0], PCI_DEVFN(sbdn_sb900 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb900[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb900[0], - PCI_DEVFN(sbdn_sb900 + 0x14, i)); + dev = dev_find_slot(0, + PCI_DEVFN(0x14, i)); if (dev) { bus_sb900[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/amd/torpedo/irq_tables.c b/src/mainboard/amd/torpedo/irq_tables.c index f47d9dc4ff..c501125d06 100644 --- a/src/mainboard/amd/torpedo/irq_tables.c +++ b/src/mainboard/amd/torpedo/irq_tables.c @@ -45,8 +45,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb900[6]; -extern unsigned long sbdn_sb900; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -72,8 +70,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb900[0]; - pirq->rtr_devfn = ((sbdn_sb900 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -89,7 +87,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb900[0], ((sbdn_sb900 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/union_station/get_bus_conf.c b/src/mainboard/amd/union_station/get_bus_conf.c index 0b55a2ac79..52b5d884a5 100644 --- a/src/mainboard/amd/union_station/get_bus_conf.c +++ b/src/mainboard/amd/union_station/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -52,18 +42,15 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); @@ -72,7 +59,7 @@ void get_bus_conf(void) } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/union_station/irq_tables.c b/src/mainboard/amd/union_station/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/amd/union_station/irq_tables.c +++ b/src/mainboard/amd/union_station/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asrock/e350m1/get_bus_conf.c b/src/mainboard/asrock/e350m1/get_bus_conf.c index 255358836b..f2c8056df3 100644 --- a/src/mainboard/asrock/e350m1/get_bus_conf.c +++ b/src/mainboard/asrock/e350m1/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -52,22 +42,19 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asrock/e350m1/irq_tables.c b/src/mainboard/asrock/e350m1/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/asrock/e350m1/irq_tables.c +++ b/src/mainboard/asrock/e350m1/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asrock/imb-a180/get_bus_conf.c b/src/mainboard/asrock/imb-a180/get_bus_conf.c index 8610e65999..17ff8a58c9 100644 --- a/src/mainboard/asrock/imb-a180/get_bus_conf.c +++ b/src/mainboard/asrock/imb-a180/get_bus_conf.c @@ -32,16 +32,7 @@ u8 bus_yangtze[6]; u32 apicid_yangtze; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; -u32 sbdn_yangtze; void get_bus_conf(void) { @@ -61,23 +52,20 @@ void get_bus_conf(void) value &= ~(1 << 11); pci_write_config32(dev, 0x60, value); - sbdn_yangtze = 0; memset(bus_yangtze, 0, sizeof(bus_yangtze)); - // bus_yangtze[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_yangtze[0] = (pci1234x[0] >> 16) & 0xff; /* yangtze */ - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_yangtze[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_yangtze[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asrock/imb-a180/irq_tables.c b/src/mainboard/asrock/imb-a180/irq_tables.c index 29dc99913a..c1c25baf02 100644 --- a/src/mainboard/asrock/imb-a180/irq_tables.c +++ b/src/mainboard/asrock/imb-a180/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_yangtze[6]; -extern unsigned long sbdn_yangtze; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_yangtze[0]; - pirq->rtr_devfn = ((sbdn_yangtze + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_yangtze[0], ((sbdn_yangtze + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asus/f2a85-m/get_bus_conf.c b/src/mainboard/asus/f2a85-m/get_bus_conf.c index 389ab8f368..fe8253ee03 100644 --- a/src/mainboard/asus/f2a85-m/get_bus_conf.c +++ b/src/mainboard/asus/f2a85-m/get_bus_conf.c @@ -33,16 +33,7 @@ u8 bus_hudson[6]; u32 apicid_hudson; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; -u32 sbdn_hudson; void get_bus_conf(void) { @@ -51,23 +42,21 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_hudson = 0; memset(bus_hudson, 0, sizeof(bus_hudson)); - bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; /* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asus/f2a85-m/irq_tables.c b/src/mainboard/asus/f2a85-m/irq_tables.c index 8fb6ff35b2..0bab5c9ca5 100644 --- a/src/mainboard/asus/f2a85-m/irq_tables.c +++ b/src/mainboard/asus/f2a85-m/irq_tables.c @@ -20,6 +20,7 @@ #include <arch/pirq_routing.h> #include <console/console.h> #include <cpu/amd/amdfam15.h> +#include <device/pci_def.h> #include <stdint.h> #include <string.h> @@ -42,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -68,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -84,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/gizmosphere/gizmo/get_bus_conf.c b/src/mainboard/gizmosphere/gizmo/get_bus_conf.c index 646c543dba..2cc2c0c30f 100755 --- a/src/mainboard/gizmosphere/gizmo/get_bus_conf.c +++ b/src/mainboard/gizmosphere/gizmo/get_bus_conf.c @@ -34,17 +34,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { @@ -53,24 +42,21 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/gizmosphere/gizmo/irq_tables.c b/src/mainboard/gizmosphere/gizmo/irq_tables.c index 5ce2be932d..bb33568562 100755 --- a/src/mainboard/gizmosphere/gizmo/irq_tables.c +++ b/src/mainboard/gizmosphere/gizmo/irq_tables.c @@ -45,8 +45,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -72,8 +70,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -89,7 +87,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c index bd5026d136..ef4eeb883e 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c @@ -34,17 +34,6 @@ u8 bus_hudson[6]; u32 apicid_hudson; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; - void get_bus_conf(void) { @@ -53,21 +42,19 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_hudson = 0; memset(bus_hudson, 0, sizeof(bus_hudson)); - bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; /* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c b/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c index b0f2a15207..42364e959a 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c @@ -20,6 +20,7 @@ #include <arch/pirq_routing.h> #include <cpu/amd/amdfam15.h> #include <console/console.h> +#include <device/pci_def.h> #include <string.h> #include <stdint.h> @@ -42,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -68,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -84,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c b/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c index 8bc5ddf811..cc3ffbbeb6 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c +++ b/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c @@ -36,17 +36,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; u32 apicver_sb800; -/** - * Here you only need to set value in pci1234 for HT-IO that could be - * installed or not. You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { @@ -55,22 +44,19 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c b/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c index 5205a46289..94a69f9b7c 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c +++ b/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c @@ -21,6 +21,7 @@ #include <arch/pirq_routing.h> #include <console/console.h> #include <cpu/amd/amdfam14.h> +#include <device/pci_def.h> #include <string.h> #include <stdint.h> @@ -43,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -70,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -86,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* PCI Bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/lippert/frontrunner-af/get_bus_conf.c b/src/mainboard/lippert/frontrunner-af/get_bus_conf.c index e736e54854..42270af68a 100644 --- a/src/mainboard/lippert/frontrunner-af/get_bus_conf.c +++ b/src/mainboard/lippert/frontrunner-af/get_bus_conf.c @@ -33,17 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { @@ -52,23 +41,20 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/lippert/frontrunner-af/irq_tables.c b/src/mainboard/lippert/frontrunner-af/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/lippert/frontrunner-af/irq_tables.c +++ b/src/mainboard/lippert/frontrunner-af/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/lippert/toucan-af/get_bus_conf.c b/src/mainboard/lippert/toucan-af/get_bus_conf.c index 20dc3aea12..eb40c541ad 100644 --- a/src/mainboard/lippert/toucan-af/get_bus_conf.c +++ b/src/mainboard/lippert/toucan-af/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -51,22 +41,19 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/lippert/toucan-af/irq_tables.c b/src/mainboard/lippert/toucan-af/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/lippert/toucan-af/irq_tables.c +++ b/src/mainboard/lippert/toucan-af/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8qgi/get_bus_conf.c b/src/mainboard/supermicro/h8qgi/get_bus_conf.c index 549334e793..8531e697a9 100644 --- a/src/mainboard/supermicro/h8qgi/get_bus_conf.c +++ b/src/mainboard/supermicro/h8qgi/get_bus_conf.c @@ -31,14 +31,12 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100; void get_bus_conf(void) { device_t dev; int i; - sbdn_sp5100 = 0; for (i = 0; i < ARRAY_SIZE(bus_sp5100); i++) { bus_sp5100[i] = 0; @@ -47,7 +45,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0; /* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/supermicro/h8qgi/irq_tables.c b/src/mainboard/supermicro/h8qgi/irq_tables.c index 6b1e226007..0af225c9dd 100644 --- a/src/mainboard/supermicro/h8qgi/irq_tables.c +++ b/src/mainboard/supermicro/h8qgi/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8qgi/mptable.c b/src/mainboard/supermicro/h8qgi/mptable.c index 754ed549bf..3793212711 100644 --- a/src/mainboard/supermicro/h8qgi/mptable.c +++ b/src/mainboard/supermicro/h8qgi/mptable.c @@ -29,7 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h> extern u8 bus_sp5100[2]; -extern u32 sbdn_sp5100; static void *smp_write_config_table(void *v) { @@ -59,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1; - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/supermicro/h8scm/get_bus_conf.c b/src/mainboard/supermicro/h8scm/get_bus_conf.c index 28c4bf7924..46ed054a26 100644 --- a/src/mainboard/supermicro/h8scm/get_bus_conf.c +++ b/src/mainboard/supermicro/h8scm/get_bus_conf.c @@ -31,14 +31,12 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100; void get_bus_conf(void) { device_t dev; int i; - sbdn_sp5100 = 0; for (i = 0; i < 0; i++) { bus_sp5100[i] = 0; @@ -47,7 +45,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0; /* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/supermicro/h8scm/irq_tables.c b/src/mainboard/supermicro/h8scm/irq_tables.c index 9770e6d848..8f727563a7 100644 --- a/src/mainboard/supermicro/h8scm/irq_tables.c +++ b/src/mainboard/supermicro/h8scm/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -87,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8scm/mptable.c b/src/mainboard/supermicro/h8scm/mptable.c index 754ed549bf..3793212711 100644 --- a/src/mainboard/supermicro/h8scm/mptable.c +++ b/src/mainboard/supermicro/h8scm/mptable.c @@ -29,7 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h> extern u8 bus_sp5100[2]; -extern u32 sbdn_sp5100; static void *smp_write_config_table(void *v) { @@ -59,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1; - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/tyan/s8226/get_bus_conf.c b/src/mainboard/tyan/s8226/get_bus_conf.c index 7a6876b880..087c04206a 100644 --- a/src/mainboard/tyan/s8226/get_bus_conf.c +++ b/src/mainboard/tyan/s8226/get_bus_conf.c @@ -30,7 +30,6 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100; void get_bus_conf(void); @@ -39,7 +38,6 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sp5100 = 0; for (i = 0; i < 0; i++) { bus_sp5100[i] = 0; @@ -48,7 +46,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0; /* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/tyan/s8226/irq_tables.c b/src/mainboard/tyan/s8226/irq_tables.c index 6b1e226007..0af225c9dd 100644 --- a/src/mainboard/tyan/s8226/irq_tables.c +++ b/src/mainboard/tyan/s8226/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/tyan/s8226/mptable.c b/src/mainboard/tyan/s8226/mptable.c index 6a12f2b821..3793212711 100644 --- a/src/mainboard/tyan/s8226/mptable.c +++ b/src/mainboard/tyan/s8226/mptable.c @@ -29,8 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h> extern u8 bus_sp5100[2]; -extern u32 sbdn_sr5650; -extern u32 sbdn_sp5100; static void *smp_write_config_table(void *v) { @@ -60,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1; - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; |