diff options
| -rw-r--r-- | src/superio/nuvoton/nct5572d/superio.c | 12 | ||||
| -rw-r--r-- | src/superio/smsc/lpc47n227/superio.c | 13 | ||||
| -rw-r--r-- | src/superio/winbond/w83667hg-a/superio.c | 12 |
3 files changed, 19 insertions, 18 deletions
diff --git a/src/superio/nuvoton/nct5572d/superio.c b/src/superio/nuvoton/nct5572d/superio.c index 30846872a0..76c983a0c7 100644 --- a/src/superio/nuvoton/nct5572d/superio.c +++ b/src/superio/nuvoton/nct5572d/superio.c @@ -43,29 +43,29 @@ static void nct5572d_init(struct device *dev) /* TODO: Might potentially need code for HWM or FDC etc. */ case NCT5572D_KBC: /* Enable mouse controller */ - pnp_enter_conf_mode_8787(dev); + pnp_enter_conf_mode(dev); byte = pnp_read_config(dev, 0x2a); byte &= ~(0x1 << 1); pnp_write_config(dev, 0x2a, byte); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); mouse_detected = pc_keyboard_init(PROBE_AUX_DEVICE); if (!mouse_detected) { printk(BIOS_INFO, "%s: Disable mouse controller.", __func__); - pnp_enter_conf_mode_8787(dev); + pnp_enter_conf_mode(dev); byte = pnp_read_config(dev, 0x2a); byte |= 0x1 << 1; pnp_write_config(dev, 0x2a, byte); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); } break; case NCT5572D_ACPI: /* Set power state after power fail */ power_status = CONFIG_MAINBOARD_POWER_FAILURE_STATE; get_option(&power_status, "power_on_after_fail"); - pnp_enter_conf_mode_8787(dev); + pnp_enter_conf_mode(dev); pnp_set_logical_device(dev); byte = pnp_read_config(dev, 0xe4); byte &= ~0x60; @@ -74,7 +74,7 @@ static void nct5572d_init(struct device *dev) else if (power_status == MAINBOARD_POWER_KEEP) byte |= (0x2 << 5); pnp_write_config(dev, 0xe4, byte); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); printk(BIOS_INFO, "set power %s after power fail\n", power_status ? "on" : "off"); break; } diff --git a/src/superio/smsc/lpc47n227/superio.c b/src/superio/smsc/lpc47n227/superio.c index 57297aba5b..911343d890 100644 --- a/src/superio/smsc/lpc47n227/superio.c +++ b/src/superio/smsc/lpc47n227/superio.c @@ -48,6 +48,7 @@ static struct device_operations ops = { .enable_resources = lpc47n227_pnp_enable_resources, .enable = lpc47n227_pnp_enable, .init = lpc47n227_init, + .ops_pnp_mode = &pnp_conf_mode_55_aa, }; static struct pnp_info pnp_dev_info[] = { @@ -81,10 +82,10 @@ void lpc47n227_pnp_set_resources(struct device *dev) { struct resource *res; - pnp_enter_conf_mode_55(dev); + pnp_enter_conf_mode(dev); for (res = dev->resource_list; res; res = res->next) lpc47n227_pnp_set_resource(dev, res); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); } /* @@ -93,9 +94,9 @@ void lpc47n227_pnp_set_resources(struct device *dev) */ void lpc47n227_pnp_enable_resources(struct device *dev) { - pnp_enter_conf_mode_55(dev); + pnp_enter_conf_mode(dev); lpc47n227_pnp_set_enable(dev, 1); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); } /* @@ -104,9 +105,9 @@ void lpc47n227_pnp_enable_resources(struct device *dev) */ void lpc47n227_pnp_enable(struct device *dev) { - pnp_enter_conf_mode_55(dev); + pnp_enter_conf_mode(dev); lpc47n227_pnp_set_enable(dev, !!dev->enabled); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); } /** diff --git a/src/superio/winbond/w83667hg-a/superio.c b/src/superio/winbond/w83667hg-a/superio.c index 4a995d6b5d..69ab91bf98 100644 --- a/src/superio/winbond/w83667hg-a/superio.c +++ b/src/superio/winbond/w83667hg-a/superio.c @@ -43,29 +43,29 @@ static void w83667hg_a_init(struct device *dev) /* TODO: Might potentially need code for HWM or FDC etc. */ case W83667HG_A_KBC: /* Enable mouse controller */ - pnp_enter_conf_mode_8787(dev); + pnp_enter_conf_mode(dev); byte = pnp_read_config(dev, 0x2a); byte &= ~(0x1 << 1); pnp_write_config(dev, 0x2a, byte); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); mouse_detected = pc_keyboard_init(PROBE_AUX_DEVICE); if (!mouse_detected && !acpi_is_wakeup_s3()) { printk(BIOS_INFO, "%s: Disable mouse controller.", __func__); - pnp_enter_conf_mode_8787(dev); + pnp_enter_conf_mode(dev); byte = pnp_read_config(dev, 0x2a); byte |= 0x1 << 1; pnp_write_config(dev, 0x2a, byte); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); } break; case W83667HG_A_ACPI: /* Set power state after power fail */ power_status = CONFIG_MAINBOARD_POWER_FAILURE_STATE; get_option(&power_status, "power_on_after_fail"); - pnp_enter_conf_mode_8787(dev); + pnp_enter_conf_mode(dev); pnp_set_logical_device(dev); byte = pnp_read_config(dev, 0xe4); byte &= ~0x60; @@ -74,7 +74,7 @@ static void w83667hg_a_init(struct device *dev) else if (power_status == MAINBOARD_POWER_KEEP) byte |= (0x2 << 5); pnp_write_config(dev, 0xe4, byte); - pnp_exit_conf_mode_aa(dev); + pnp_exit_conf_mode(dev); printk(BIOS_INFO, "set power %s after power fail\n", power_status ? "on" : "off"); break; } |