diff options
-rw-r--r-- | src/cpu/amd/car/post_cache_as_ram.c | 12 | ||||
-rw-r--r-- | src/cpu/amd/model_fxx/model_fxx_init.c | 52 |
2 files changed, 32 insertions, 32 deletions
diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c index 8ce49aa800..9816a154d4 100644 --- a/src/cpu/amd/car/post_cache_as_ram.c +++ b/src/cpu/amd/car/post_cache_as_ram.c @@ -1,4 +1,4 @@ -/* 2005.6 by yhlu +/* 2005.6 by yhlu * 2006.3 yhlu add copy data from CAR to ram */ #include "cpu/amd/car/disable_cache_as_ram.c" @@ -55,13 +55,13 @@ static void post_cache_as_ram(void) unsigned testx = 0x5a5a5a5a; print_debug_pcar("testx = ", testx); - /* copy data from cache as ram to + /* copy data from cache as ram to ram need to set CONFIG_RAMTOP to 2M and use var mtrr instead. */ #if CONFIG_RAMTOP <= 0x100000 #error "You need to set CONFIG_RAMTOP greater than 1M" #endif - + /* So we can access RAM from [1M, CONFIG_RAMTOP) */ set_var_mtrr(0, 0x00000000, CONFIG_RAMTOP, MTRR_TYPE_WRBACK); @@ -90,14 +90,14 @@ static void post_cache_as_ram(void) print_debug_pcar("testx = ", testx); print_debug("Disabling cache as ram now \r\n"); - disable_cache_as_ram_bsp(); + disable_cache_as_ram_bsp(); print_debug("Clearing initial memory region: "); #if CONFIG_HAVE_ACPI_RESUME == 1 /* clear only coreboot used region of memory. Note: this may break ECC enabled boards */ - memset((void*) CONFIG_RAMBASE, (CONFIG_RAMTOP) - CONFIG_RAMBASE - CONFIG_DCACHE_RAM_SIZE, 0); + memset((void*) CONFIG_RAMBASE, 0, (CONFIG_RAMTOP) - CONFIG_RAMBASE - CONFIG_DCACHE_RAM_SIZE); #else - memset((void*)0, ((CONFIG_RAMTOP) - CONFIG_DCACHE_RAM_SIZE), 0); + memset((void*)0, 0, ((CONFIG_RAMTOP) - CONFIG_DCACHE_RAM_SIZE)); #endif print_debug("Done\r\n"); diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c index b190921d77..4d9dc3328e 100644 --- a/src/cpu/amd/model_fxx/model_fxx_init.c +++ b/src/cpu/amd/model_fxx/model_fxx_init.c @@ -5,7 +5,7 @@ * 2005.02 yhlu add e0 memory hole support * Copyright 2005 AMD - * 2005.08 yhlu add microcode support + * 2005.08 yhlu add microcode support */ #include <console/console.h> #include <cpu/x86/msr.h> @@ -199,7 +199,7 @@ static void set_init_ecc_mtrrs(void) enable_cache(); } -static inline void clear_2M_ram(unsigned long basek, struct mtrr_state *mtrr_state) +static inline void clear_2M_ram(unsigned long basek, struct mtrr_state *mtrr_state) { unsigned long limitk; unsigned long size; @@ -226,7 +226,7 @@ static inline void clear_2M_ram(unsigned long basek, struct mtrr_state *mtrr_sta #if 0 /* couldn't happen, memory must on 2M boundary */ if(limitk>endk) { - limitk = enk; + limitk = enk; } #endif size = (limitk - basek) << 10; @@ -238,7 +238,7 @@ static inline void clear_2M_ram(unsigned long basek, struct mtrr_state *mtrr_sta /* clear memory 2M (limitk - basek) */ addr = (void *)(((uint32_t)addr) | ((basek & 0x7ff) << 10)); - memset(addr, size, 0); + memset(addr, 0, size); } static void init_ecc_memory(unsigned node_id) @@ -278,7 +278,7 @@ static void init_ecc_memory(unsigned node_id) (SCRUB_NONE << 16) | (SCRUB_NONE << 8) | (SCRUB_NONE << 0)); printk_debug("Scrubbing Disabled\n"); } - + /* If ecc support is not enabled don't touch memory */ dcl = pci_read_config32(f2_dev, DRAM_CONFIG_LOW); @@ -292,7 +292,7 @@ static void init_ecc_memory(unsigned node_id) #if CONFIG_HW_MEM_HOLE_SIZEK != 0 #if CONFIG_K8_REV_F_SUPPORT == 0 - if (!is_cpu_pre_e0()) + if (!is_cpu_pre_e0()) { #endif @@ -305,7 +305,7 @@ static void init_ecc_memory(unsigned node_id) } #endif #endif - + /* Don't start too early */ begink = startk; @@ -337,10 +337,10 @@ static void init_ecc_memory(unsigned node_id) clear_2M_ram(basek, &mtrr_state); } } - else + else #endif for(basek = begink; basek < endk; - basek = ((basek + ZERO_CHUNK_KB) & ~(ZERO_CHUNK_KB - 1))) + basek = ((basek + ZERO_CHUNK_KB) & ~(ZERO_CHUNK_KB - 1))) { clear_2M_ram(basek, &mtrr_state); } @@ -385,7 +385,7 @@ static inline void k8_errata(void) msr = rdmsr_amd(DC_CFG_MSR); msr.lo |= (1 << 10); wrmsr_amd(DC_CFG_MSR, msr); - + } /* I can't touch this msr on early buggy cpus */ if (!is_cpu_pre_b3()) { @@ -393,10 +393,10 @@ static inline void k8_errata(void) /* Erratum 89 ... */ msr = rdmsr(NB_CFG_MSR); msr.lo |= 1 << 3; - + if (!is_cpu_pre_c0() && is_cpu_pre_d0()) { /* D0 later don't need it */ - /* Erratum 86 Disable data masking on C0 and + /* Erratum 86 Disable data masking on C0 and * later processor revs. * FIXME this is only needed if ECC is enabled. */ @@ -404,14 +404,14 @@ static inline void k8_errata(void) } wrmsr(NB_CFG_MSR, msr); } - + /* Erratum 97 ... */ if (!is_cpu_pre_c0() && is_cpu_pre_d0()) { msr = rdmsr_amd(DC_CFG_MSR); msr.lo |= 1 << 3; wrmsr_amd(DC_CFG_MSR, msr); - } - + } + /* Erratum 94 ... */ if (is_cpu_pre_d0()) { msr = rdmsr_amd(IC_CFG_MSR); @@ -440,7 +440,7 @@ static inline void k8_errata(void) #endif #if CONFIG_K8_REV_F_SUPPORT == 0 - if (!is_cpu_pre_e0()) + if (!is_cpu_pre_e0()) #endif { /* Erratum 110 ... */ @@ -478,12 +478,12 @@ static void model_fxx_init(device_t dev) #if CONFIG_K8_REV_F_SUPPORT == 1 struct cpuinfo_x86 c; - + get_fms(&c, dev->device); #endif #if CONFIG_USBDEBUG_DIRECT - if(!ehci_debug_addr) + if(!ehci_debug_addr) ehci_debug_addr = get_ehci_debug(); set_ehci_debug(0); #endif @@ -501,7 +501,7 @@ static void model_fxx_init(device_t dev) model_fxx_update_microcode(dev->device); disable_cache(); - + /* zero the machine check error status registers */ msr.lo = 0; msr.hi = 0; @@ -510,15 +510,15 @@ static void model_fxx_init(device_t dev) } k8_errata(); - + /* Set SMMLOCK to avoid exploits messing with SMM */ msr = rdmsr(HWCR_MSR); msr.lo |= (1 << 0); wrmsr(HWCR_MSR, msr); - + /* Set the processor name string */ init_processor_name(); - + enable_cache(); /* Enable the local cpu apics */ @@ -529,17 +529,17 @@ static void model_fxx_init(device_t dev) if(siblings>0) { msr = rdmsr_amd(CPU_ID_FEATURES_MSR); - msr.lo |= 1 << 28; + msr.lo |= 1 << 28; wrmsr_amd(CPU_ID_FEATURES_MSR, msr); msr = rdmsr_amd(LOGICAL_CPUS_NUM_MSR); - msr.lo = (siblings+1)<<16; + msr.lo = (siblings+1)<<16; wrmsr_amd(LOGICAL_CPUS_NUM_MSR, msr); msr = rdmsr_amd(CPU_ID_EXT_FEATURES_MSR); - msr.hi |= 1<<(33-32); + msr.hi |= 1<<(33-32); wrmsr_amd(CPU_ID_EXT_FEATURES_MSR, msr); - } + } #endif |