diff options
-rw-r--r-- | src/cpu/p6/earlymtrr.c | 8 | ||||
-rw-r--r-- | src/mainboard/via/epia/Config.lb | 10 | ||||
-rw-r--r-- | src/mainboard/via/epia/auto.c | 4 | ||||
-rw-r--r-- | src/northbridge/via/vt8601/raminit.c | 5 | ||||
-rw-r--r-- | src/southbridge/via/vt8231/vt8231.c | 1 | ||||
-rw-r--r-- | src/southbridge/via/vt8231/vt8231_early_smbus.c | 28 |
6 files changed, 24 insertions, 32 deletions
diff --git a/src/cpu/p6/earlymtrr.c b/src/cpu/p6/earlymtrr.c index c4563ea860..707923b231 100644 --- a/src/cpu/p6/earlymtrr.c +++ b/src/cpu/p6/earlymtrr.c @@ -37,7 +37,7 @@ static void early_mtrr_init(void) const unsigned long *msr_addr; unsigned long cr0; - print_err("Disabling cache\n"); + print_err("Disabling cache\r\n"); /* Just to be sure, take all the steps to disable the cache. * This may not be needed, but C3's may... * Invalidate the cache */ @@ -56,7 +56,7 @@ static void early_mtrr_init(void) /* Invalidate the cache again */ asm volatile ("invd"); - print_err("Clearing mtrr\n"); + print_err("Clearing mtrr\r\n"); /* Inialize all of the relevant msrs to 0 */ msr.lo = 0; @@ -81,7 +81,7 @@ static void early_mtrr_init(void) wrmsr(0x201, msr); #if defined(XIP_ROM_SIZE) && defined(XIP_ROM_BASE) - print_err("Setting XIP\n"); + print_err("Setting XIP\r\n"); /* enable write through caching so we can do execute in place * on the flash rom. */ @@ -104,5 +104,5 @@ static void early_mtrr_init(void) cr0 = read_cr0(); cr0 &= 0x9fffffff; write_cr0(cr0); - print_err("Enabled the cache\n"); + print_err("Enabled the cache\r\n"); } diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb index ba2d0b28af..a364b8f810 100644 --- a/src/mainboard/via/epia/Config.lb +++ b/src/mainboard/via/epia/Config.lb @@ -50,12 +50,6 @@ object irq_tables.o ## option HAVE_OPTION_TABLE=1 -## -## Clean up the motherboard id strings -## -option MAINBOARD_PART_NUMBER="HDAMA" -option MAINBOARD_VENDOR="ARIMA" - ### ### LinuxBIOS layout values ### @@ -137,7 +131,7 @@ end makerule ./failover.inc depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + action "./romcc -O2 -mcpu=c3 -o failover.inc --label-prefix=failover ./failover.E" end makerule ./auto.E @@ -146,7 +140,7 @@ makerule ./auto.E end makerule ./auto.inc depends "./auto.E ./romcc" - action "./romcc -O ./auto.E > auto.inc" + action "./romcc -O2 -mcpu=c3 ./auto.E > auto.inc" end ## diff --git a/src/mainboard/via/epia/auto.c b/src/mainboard/via/epia/auto.c index c1a6b9b98c..fcb48a8953 100644 --- a/src/mainboard/via/epia/auto.c +++ b/src/mainboard/via/epia/auto.c @@ -1,5 +1,7 @@ #define ASSEMBLY 1 +#define MAXIMUM_CONSOLE_LOGLEVEL 6 +#define DEFAULT_CONSOLE_LOGLEVEL 6 #include <stdint.h> #include <device/pci_def.h> @@ -27,8 +29,6 @@ void udelay(int usecs) #include "southbridge/via/vt8231/vt8231_early_smbus.c" -#define MAXIMUM_CONSOLE_LOGLEVEL 6 -#define DEFAULT_CONSOLE_LOGLEVEL 6 #include "southbridge/via/vt8231/vt8231_early_serial.c" static void memreset_setup(void) diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c index 57738e336e..5321e60f66 100644 --- a/src/northbridge/via/vt8601/raminit.c +++ b/src/northbridge/via/vt8601/raminit.c @@ -455,11 +455,10 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) // for(i = 0; i < 8; i++) base = do_module_size(0); /*, base);*/ pci_write_config8(north, ramregs[0], base); - base = do_module_size(1); /*, base);*/ - base += pci_read_config8(north, ramregs[0]); + base += do_module_size(1); /*, base);*/ pci_write_config8(north, ramregs[1], base); /* runs out of code space. */ - for(i = 0; i < 8; i++){ + for(i = 2; i < 8; i++){ pci_write_config8(north, ramregs[i], base); /* pci_write_config8(north, ramregs[3], base); diff --git a/src/southbridge/via/vt8231/vt8231.c b/src/southbridge/via/vt8231/vt8231.c index 55e833d7b5..1719fb207d 100644 --- a/src/southbridge/via/vt8231/vt8231.c +++ b/src/southbridge/via/vt8231/vt8231.c @@ -437,7 +437,6 @@ static void southbridge_init(struct chip *chip, enum chip_pass pass) case CONF_PASS_POST_PCI: vt8231_init(conf); - printk_err("FUCK! ROUTING FIXUP!\n"); pci_routing_fixup(); break; diff --git a/src/southbridge/via/vt8231/vt8231_early_smbus.c b/src/southbridge/via/vt8231/vt8231_early_smbus.c index e419d59b63..1888176144 100644 --- a/src/southbridge/via/vt8231/vt8231_early_smbus.c +++ b/src/southbridge/via/vt8231/vt8231_early_smbus.c @@ -47,8 +47,8 @@ static void enable_smbus(void) c = pci_read_config8(dev, 4); c |= 1; pci_write_config8(dev, 4, c); - print_err_hex8(c); - print_err(" is the comm register\n"); + print_debug_hex8(c); + print_debug(" is the comm register\r\n"); print_debug("SMBus controller enabled\r\n"); } @@ -69,9 +69,9 @@ static int smbus_wait_until_ready(void) smbus_delay(); c = inb(SMBUS_IO_BASE + SMBHSTSTAT); while((c & 1) == 1) { - print_err("c is "); - print_err_hex8(c); - print_err("\n"); + print_debug("c is "); + print_debug_hex8(c); + print_debug("\r\n"); c = inb(SMBUS_IO_BASE + SMBHSTSTAT); /* nop */ } @@ -88,9 +88,9 @@ void smbus_reset(void) outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT); smbus_wait_until_ready(); - print_err("After reset status "); - print_err_hex8( inb(SMBUS_IO_BASE + SMBHSTSTAT)); - print_err("\n"); + print_debug("After reset status "); + print_debug_hex8( inb(SMBUS_IO_BASE + SMBHSTSTAT)); + print_debug("\r\n"); } @@ -117,21 +117,21 @@ static void smbus_print_error(unsigned char host_status_register) print_err("smbus_error: "); print_err_hex8(host_status_register); - print_err("\n"); + print_err("\r\n"); if (host_status_register & (1 << 4)) { - print_err("Interrup/SMI# was Failed Bus Transaction\n"); + print_err("Interrup/SMI# was Failed Bus Transaction\r\n"); } if (host_status_register & (1 << 3)) { - print_err("Bus Error\n"); + print_err("Bus Error\r\n"); } if (host_status_register & (1 << 2)) { - print_err("Device Error\n"); + print_err("Device Error\r\n"); } if (host_status_register & (1 << 1)) { - print_err("Interrupt/SMI# was Successful Completion\n"); + print_err("Interrupt/SMI# was Successful Completion\r\n"); } if (host_status_register & (1 << 0)) { - print_err("Host Busy\n"); + print_err("Host Busy\r\n"); } } |