diff options
-rw-r--r-- | src/include/spd_bin.h | 10 | ||||
-rw-r--r-- | src/soc/intel/common/block/smbus/smbuslib.c | 48 |
2 files changed, 58 insertions, 0 deletions
diff --git a/src/include/spd_bin.h b/src/include/spd_bin.h index d1ee6f775c..11a0084c70 100644 --- a/src/include/spd_bin.h +++ b/src/include/spd_bin.h @@ -21,16 +21,19 @@ #define SPD_DRAM_LPDDR5 0x13 #define SPD_DENSITY_BANKS 4 #define SPD_ADDRESSING 5 +#define SPD_SN_LEN 4 #define DDR3_ORGANIZATION 7 #define DDR3_BUS_DEV_WIDTH 8 #define DDR4_ORGANIZATION 12 #define DDR4_BUS_DEV_WIDTH 13 #define DDR3_SPD_PART_OFF 128 #define DDR3_SPD_PART_LEN 18 +#define DDR3_SPD_SN_OFF 122 #define LPDDR3_SPD_PART_OFF 128 #define LPDDR3_SPD_PART_LEN 18 #define DDR4_SPD_PART_OFF 329 #define DDR4_SPD_PART_LEN 20 +#define DDR4_SPD_SN_OFF 325 struct spd_block { u8 addr_map[CONFIG_DIMM_MAX]; /* 7 bit I2C addresses */ @@ -45,6 +48,13 @@ int get_spd_cbfs_rdev(struct region_device *spd_rdev, u8 spd_index); void dump_spd_info(struct spd_block *blk); void get_spd_smbus(struct spd_block *blk); +/* + * get_spd_sn returns the SODIMM serial number. It only supports DDR3 and DDR4. + * return CB_SUCCESS, sn is the serial number and sn=0xffffffff if the dimm is not present. + * return CB_ERR, if dram_type is not supported or addr is a zero. + */ +enum cb_err get_spd_sn(u8 addr, u32 *sn); + /* expects SPD size to be 128 bytes, reads from "spd.bin" in CBFS and verifies the checksum. Only available if CONFIG_DIMM_SPD_SIZE == 128. */ int read_ddr3_spd_from_cbfs(u8 *buf, int idx); diff --git a/src/soc/intel/common/block/smbus/smbuslib.c b/src/soc/intel/common/block/smbus/smbuslib.c index f7192c85d4..5441b06219 100644 --- a/src/soc/intel/common/block/smbus/smbuslib.c +++ b/src/soc/intel/common/block/smbus/smbuslib.c @@ -79,3 +79,51 @@ void get_spd_smbus(struct spd_block *blk) update_spd_len(blk); } + +/* + * get_spd_sn returns the SODIMM serial number. It only supports DDR3 and DDR4. + * return CB_SUCCESS, sn is the serial number and sn=0xffffffff if the dimm is not present. + * return CB_ERR, if dram_type is not supported or addr is a zero. + */ +enum cb_err get_spd_sn(u8 addr, u32 *sn) +{ + u8 i; + u8 dram_type; + int smbus_ret; + + /* addr is not a zero. */ + if (addr == 0x0) + return CB_ERR; + + /* If dimm is not present, set sn to 0xff. */ + smbus_ret = do_smbus_read_byte(SMBUS_IO_BASE, addr, SPD_DRAM_TYPE); + if (smbus_ret < 0) { + printk(BIOS_INFO, "No memory dimm at address %02X\n", addr); + *sn = 0xffffffff; + return CB_SUCCESS; + } + + dram_type = smbus_ret & 0xff; + + /* Check if module is DDR4, DDR4 spd is 512 byte. */ + if (dram_type == SPD_DRAM_DDR4 && CONFIG_DIMM_SPD_SIZE > SPD_PAGE_LEN) { + /* Switch to page 1 */ + do_smbus_write_byte(SMBUS_IO_BASE, SPD_PAGE_1, 0, 0); + + for (i = 0; i < SPD_SN_LEN; i++) + *((u8 *)sn + i) = do_smbus_read_byte(SMBUS_IO_BASE, addr, + i + DDR4_SPD_SN_OFF); + + /* Restore to page 0 */ + do_smbus_write_byte(SMBUS_IO_BASE, SPD_PAGE_0, 0, 0); + } else if (dram_type == SPD_DRAM_DDR3) { + for (i = 0; i < SPD_SN_LEN; i++) + *((u8 *)sn + i) = do_smbus_read_byte(SMBUS_IO_BASE, addr, + i + DDR3_SPD_SN_OFF); + } else { + printk(BIOS_ERR, "Unsupported dram_type\n"); + return CB_ERR; + } + + return CB_SUCCESS; +} |