summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/mainboard/lanner/Kconfig16
-rw-r--r--src/mainboard/lanner/Kconfig.name2
-rw-r--r--src/mainboard/lanner/em8510/Kconfig25
-rw-r--r--src/mainboard/lanner/em8510/Kconfig.name2
-rw-r--r--src/mainboard/lanner/em8510/board_info.txt1
-rw-r--r--src/mainboard/lanner/em8510/cmos.layout28
-rw-r--r--src/mainboard/lanner/em8510/devicetree.cb56
-rw-r--r--src/mainboard/lanner/em8510/irq_tables.c52
-rw-r--r--src/mainboard/lanner/em8510/romstage.c75
-rw-r--r--src/northbridge/intel/i855/Kconfig35
-rw-r--r--src/northbridge/intel/i855/Makefile.inc5
-rw-r--r--src/northbridge/intel/i855/debug.c129
-rw-r--r--src/northbridge/intel/i855/i855.h77
-rw-r--r--src/northbridge/intel/i855/northbridge.c145
-rw-r--r--src/northbridge/intel/i855/raminit.c980
-rw-r--r--src/northbridge/intel/i855/raminit.h29
-rw-r--r--src/northbridge/intel/i855/reset_test.c35
17 files changed, 0 insertions, 1692 deletions
diff --git a/src/mainboard/lanner/Kconfig b/src/mainboard/lanner/Kconfig
deleted file mode 100644
index 3b304ba9f5..0000000000
--- a/src/mainboard/lanner/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if VENDOR_LANNER
-
-choice
- prompt "Mainboard model"
-
-source "src/mainboard/lanner/*/Kconfig.name"
-
-endchoice
-
-source "src/mainboard/lanner/*/Kconfig"
-
-config MAINBOARD_VENDOR
- string
- default "Lanner"
-
-endif # VENDOR_LANNER
diff --git a/src/mainboard/lanner/Kconfig.name b/src/mainboard/lanner/Kconfig.name
deleted file mode 100644
index 69026c5f5e..0000000000
--- a/src/mainboard/lanner/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config VENDOR_LANNER
- bool "Lanner"
diff --git a/src/mainboard/lanner/em8510/Kconfig b/src/mainboard/lanner/em8510/Kconfig
deleted file mode 100644
index 2919df9d25..0000000000
--- a/src/mainboard/lanner/em8510/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if BOARD_LANNER_EM8510
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_INTEL_SOCKET_MPGA479M
- select NORTHBRIDGE_INTEL_I855
- select SOUTHBRIDGE_INTEL_I82801DX
- select SUPERIO_WINBOND_W83627THG
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select BOARD_ROMSIZE_KB_512
-
-config MAINBOARD_DIR
- string
- default lanner/em8510
-
-config MAINBOARD_PART_NUMBER
- string
- default "EM-8510"
-
-config IRQ_SLOT_COUNT
- int
- default 10
-
-endif # BOARD_LANNER_EM8510
diff --git a/src/mainboard/lanner/em8510/Kconfig.name b/src/mainboard/lanner/em8510/Kconfig.name
deleted file mode 100644
index 1ab59af5b7..0000000000
--- a/src/mainboard/lanner/em8510/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_LANNER_EM8510
- bool "EM-8510"
diff --git a/src/mainboard/lanner/em8510/board_info.txt b/src/mainboard/lanner/em8510/board_info.txt
deleted file mode 100644
index 31cf7506fb..0000000000
--- a/src/mainboard/lanner/em8510/board_info.txt
+++ /dev/null
@@ -1 +0,0 @@
-Category: desktop
diff --git a/src/mainboard/lanner/em8510/cmos.layout b/src/mainboard/lanner/em8510/cmos.layout
deleted file mode 100644
index b8ea9363a4..0000000000
--- a/src/mainboard/lanner/em8510/cmos.layout
+++ /dev/null
@@ -1,28 +0,0 @@
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-456 1 e 1 ECC_memory
-1008 16 h 0 check_sum
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-
-checksums
-
-checksum 392 1007 1008
diff --git a/src/mainboard/lanner/em8510/devicetree.cb b/src/mainboard/lanner/em8510/devicetree.cb
deleted file mode 100644
index 0a91cc99c0..0000000000
--- a/src/mainboard/lanner/em8510/devicetree.cb
+++ /dev/null
@@ -1,56 +0,0 @@
-chip northbridge/intel/i855
- device domain 0 on
- device pci 0.0 on end
- chip southbridge/intel/i82801dx
-# pci 11.0 on end
-# pci 11.1 on end
-# pci 11.2 on end
-# pci 11.3 on end
-# pci 11.4 on end
-# pci 11.5 on end
-# pci 11.6 on end
-# pci 12.0 on end
- register "enable_usb" = "0"
- register "enable_native_ide" = "0"
- device pci 1f.0 on
- chip superio/winbond/w83627thg # link 1
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.7 off end # GAME_MIDI_GIPO1
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- end
- end
- end
- end
- end
- device cpu_cluster 0 on
- chip cpu/intel/socket_mPGA479M
- device lapic 0 on end
- end
- end
-end
diff --git a/src/mainboard/lanner/em8510/irq_tables.c b/src/mainboard/lanner/em8510/irq_tables.c
deleted file mode 100644
index 6e769d713f..0000000000
--- a/src/mainboard/lanner/em8510/irq_tables.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Travelping GmbH <info@travelping.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/pirq_routing.h>
-
-static const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32 + 16 * 10, /* Max. number of devices on the bus */
- 0x00, /* Interrupt router bus */
- (0x1f << 3) | 0x0, /* Interrupt router dev */
- 0x1e20, /* IRQs devoted exclusively to PCI usage */
- 0x8086, /* Vendor */
- 0x24cc, /* Device */
- 0, /* Miniport */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x39, /* Checksum (has to be set to some value that
- * would give 0 after the sum of all bytes
- * for this structure (including checksum).
- */
- {
- /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x01, (0x0f << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x1, 0x0},
- {0x01, (0x0a << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x2, 0x0},
- {0x01, (0x05 << 3) | 0x0, {{0x68, 0xdeb8}, {0x69, 0xdeb8}, {0x6a, 0xdeb8}, {0x6b, 0xdeb8}}, 0x3, 0x0},
- {0x01, (0x06 << 3) | 0x0, {{0x69, 0xdeb8}, {0x6a, 0xdeb8}, {0x6b, 0xdeb8}, {0x68, 0xdeb8}}, 0x4, 0x0},
- {0x01, (0x07 << 3) | 0x0, {{0x6a, 0xdeb8}, {0x6b, 0xdeb8}, {0x68, 0xdeb8}, {0x69, 0xdeb8}}, 0x5, 0x0},
- {0x01, (0x09 << 3) | 0x0, {{0x6b, 0xdeb8}, {0x68, 0xdeb8}, {0x69, 0xdeb8}, {0x6a, 0xdeb8}}, 0x6, 0x0},
- {0x00, (0x1e << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0},
- {0x00, (0x02 << 3) | 0x0, {{0x60, 0xdeb8}, {0x60, 0xdeb8}, {0x60, 0xdeb8}, {0x60, 0xdeb8}}, 0x0, 0x0},
- {0x00, (0x1f << 3) | 0x0, {{0x62, 0xdeb8}, {0x61, 0xdeb8}, {0x60, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0},
- {0x00, (0x1d << 3) | 0x0, {{0x60, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0xdeb8}, {0x6b, 0xdeb8}}, 0x0, 0x0},
- }
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/lanner/em8510/romstage.c b/src/mainboard/lanner/em8510/romstage.c
deleted file mode 100644
index 126d942645..0000000000
--- a/src/mainboard/lanner/em8510/romstage.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Original take from digitallogic/adl855pc
- *
- * Copyright (C) 2010 Travelping GmbH <info@travelping.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <stdlib.h>
-#include <lib.h>
-#include <spd.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <southbridge/intel/i82801dx/i82801dx.h>
-#include <northbridge/intel/i855/raminit.h>
-#include "northbridge/intel/i855/debug.c"
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83627thg/w83627thg.h>
-#include <cpu/x86/bist.h>
-#include <cpu/intel/romstage.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1)
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/i855/raminit.c"
-#include "northbridge/intel/i855/reset_test.c"
-
-void mainboard_romstage_entry(unsigned long bist)
-{
- if (bist == 0) {
-#if 0
- enable_lapic();
- init_timer();
-#endif
- }
-
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
-#if 0
- print_pci_devices();
-#endif
-
- if (!bios_reset_detected()) {
- enable_smbus();
-#if 1
- dump_spd_registers();
- dump_smbus_registers();
-#endif
- sdram_set_registers();
- sdram_set_spd_registers();
- sdram_enable();
- }
-}
diff --git a/src/northbridge/intel/i855/Kconfig b/src/northbridge/intel/i855/Kconfig
deleted file mode 100644
index a9439dcd40..0000000000
--- a/src/northbridge/intel/i855/Kconfig
+++ /dev/null
@@ -1,35 +0,0 @@
-config NORTHBRIDGE_INTEL_I855
- bool
- select NO_MMCONF_SUPPORT
- select HAVE_DEBUG_RAM_SETUP
- select LATE_CBMEM_INIT
-
-choice
- prompt "Onboard graphics"
- default I855_VIDEO_MB_8MB
- depends on NORTHBRIDGE_INTEL_I855
-
-config I855_VIDEO_MB_OFF
- bool "Disabled, 0KB"
-config I855_VIDEO_MB_1MB
- bool "Enabled, 1MB"
-config I855_VIDEO_MB_4MB
- bool "Enabled, 4MB"
-config I855_VIDEO_MB_8MB
- bool "Enabled, 8MB"
-config I855_VIDEO_MB_16MB
- bool "Enabled, 16MB"
-config I855_VIDEO_MB_32MB
- bool "Enabled, 32MB"
-
-endchoice
-
-config VIDEO_MB
- int
- default 0 if I855_VIDEO_MB_OFF
- default 1 if I855_VIDEO_MB_1MB
- default 4 if I855_VIDEO_MB_4MB
- default 8 if I855_VIDEO_MB_8MB
- default 16 if I855_VIDEO_MB_16MB
- default 32 if I855_VIDEO_MB_32MB
- depends on NORTHBRIDGE_INTEL_I855
diff --git a/src/northbridge/intel/i855/Makefile.inc b/src/northbridge/intel/i855/Makefile.inc
deleted file mode 100644
index 4dfc358fa0..0000000000
--- a/src/northbridge/intel/i855/Makefile.inc
+++ /dev/null
@@ -1,5 +0,0 @@
-ifeq ($(CONFIG_NORTHBRIDGE_INTEL_I855),y)
-
-ramstage-y += northbridge.c
-
-endif
diff --git a/src/northbridge/intel/i855/debug.c b/src/northbridge/intel/i855/debug.c
deleted file mode 100644
index bdf25235e2..0000000000
--- a/src/northbridge/intel/i855/debug.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Ronald G. Minnich
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <spd.h>
-
-static void print_debug_pci_dev(unsigned dev)
-{
- printk(BIOS_DEBUG, "PCI: %02x:%02x.%x",
- (dev >> 20) & 0xff, (dev >> 15) & 0x1f, (dev >> 12) & 0x07);
-}
-
-static inline void print_pci_devices(void)
-{
- pci_devfn_t dev;
- for (dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- print_debug_pci_dev(dev);
- printk(BIOS_DEBUG, "\n");
- }
-}
-
-static void dump_pci_device(unsigned dev)
-{
- int i;
- print_debug_pci_dev(dev);
- printk(BIOS_DEBUG, "\n");
-
- for (i = 0; i <= 255; i++) {
- unsigned char val;
- if ((i & 0x0f) == 0)
- printk(BIOS_DEBUG, "%02x:", i);
- val = pci_read_config8(dev, i);
- printk(BIOS_DEBUG, " %02x", val);
- if ((i & 0x0f) == 0x0f)
- printk(BIOS_DEBUG, "\n");
- }
-}
-
-static inline void dump_pci_devices(void)
-{
- pci_devfn_t dev;
- for (dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- dump_pci_device(dev);
- }
-}
-
-static inline void dump_spd_registers(void)
-{
- int i;
- printk(BIOS_DEBUG, "\n");
- for (i = 0; i < 2; i++) {
- unsigned device;
- device = DIMM0 + i;
- if (device) {
- int j;
- printk(BIOS_DEBUG, "dimm: %02x.0: %02x", i, device);
- for (j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0)
- printk(BIOS_DEBUG, "\n%02x: ", j);
- status = smbus_read_byte(device, j);
- if (status < 0) {
- printk(BIOS_DEBUG, "bad device\n");
- break;
- }
- byte = status & 0xff;
- printk(BIOS_DEBUG, "%02x ", byte);
- }
- printk(BIOS_DEBUG, "\n");
- }
- }
-}
-
-static inline void dump_smbus_registers(void)
-{
- int i;
- printk(BIOS_DEBUG, "\n");
- for (i = 1; i < 0x80; i++) {
- unsigned device;
- device = i;
- int j;
- printk(BIOS_DEBUG, "smbus: %02x", device);
- for (j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0)
- printk(BIOS_DEBUG, "\n%02x: ", j);
- status = smbus_read_byte(device, j);
- if (status < 0) {
- printk(BIOS_DEBUG, "bad device\n");
- break;
- }
- byte = status & 0xff;
- printk(BIOS_DEBUG, "%02x ", byte);
- }
- printk(BIOS_DEBUG, "\n");
- }
-}
diff --git a/src/northbridge/intel/i855/i855.h b/src/northbridge/intel/i855/i855.h
deleted file mode 100644
index 467875faf4..0000000000
--- a/src/northbridge/intel/i855/i855.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Travelping GmbH <info@travelping.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef NORTHBRIDGE_INTEL_I855_I855_H
-#define NORTHBRIDGE_INTEL_I855_I855_H
-
-/* Host-Hub Interface Bridge */
-#define GMC 0x50 /* GMCH Misc. Control (0x0000) */
-#define GGC 0x52 /* GMCH Graphics Control (0x0030) */
-#define DAFC 0x54 /* Device and Function Control (0x0000) */
-#define FDHC 0x58 /* Fixed Dram Hole Control */
-#define PAM0 0x59 /* Programmable Attribute Map #0 (0x00) */
-#define PAM1 0x5a /* Programmable Attribute Map #1 (0x00) */
-#define PAM2 0x5b /* Programmable Attribute Map #2 (0x00) */
-#define PAM3 0x5c /* Programmable Attribute Map #3 (0x00) */
-#define PAM4 0x5d /* Programmable Attribute Map #4 (0x00) */
-#define PAM5 0x5e /* Programmable Attribute Map #5 (0x00) */
-#define PAM6 0x5f /* Programmable Attribute Map #6 (0x00) */
-#define SMRAM 0x60 /* System Management RAM Control (0x02) */
-#define ESMRAMC 0x61 /* Extended System Management RAM Control (0x38) */
-#define ERRSTS 0x62 /* Error Status (0x0000) */
-#define ERRCMD 0x64 /* Error Command (0x0000) */
-#define SMICMD 0x66 /* SMI Command (0x00) */
-#define SCICMD 0x67 /* SCI Command (0x00) */
-#define SHIC 0x74 /* Secondary Host Interface Control Register (0x00006010) */
-#define ACAPID 0xA0 /* AGP Capability Identifier (0x00200002) */
-#define AGPSTAT 0xA4 /* AGP Status Register (0x1f000217) */
-#define AGPCMD 0xA8 /* AGP Command (0x0000) */
-#define AGPCTRL 0xB0 /* AGP Control (0x0000) */
-#define AFT 0xB2 /* AGP Functional Test (0xe9f0) */
-#define ATTBASE 0xB8 /* Aperture Translation Table Base (0x00000000) */
-#define AMTT 0xBC /* AGP Interface Multi Transaction Timer (0x00) */
-#define LPTT 0xBD /* Low Priority Transaction Timer (0x00) */
-#define HEM 0xF0 /* Host Error Control/Status/Obs (0x00000000) */
-
-/* Main Memory Control */
-#define DRB 0x40 /* DRAM Row 0-3 Boundary (0x00000000) */
-#define DRA 0x50 /* DRAM Row 0-3 Attribute (0x7777) */
-#define DRT 0x60 /* DRAM Timing (0x18004425) */
-#define PWRMG 0x68 /* DRAM Controller Power Management Control (0x00000000) */
-#define DRC 0x70 /* DRAM Controller Mode (0x00000081) */
-#define DTC 0xA0 /* DRAM Throttling Control (0x00000000) */
-
-#define DRT_CAS_MASK (3 << 5)
-#define DRT_CAS_2_0 (1 << 5)
-#define DRT_CAS_2_5 (0 << 5)
-
-#define DRT_TRP_MASK 3
-#define DRT_TRP_4 0
-#define DRT_TRP_3 1
-#define DRT_TRP_2 2
-
-#define DRT_RCD_MASK (3 << 2)
-#define DRT_RCD_4 (0 << 2)
-#define DRT_RCD_3 (1 << 2)
-#define DRT_RCD_2 (2 << 2)
-
-#define DRT_TRAS_MIN_MASK (3 << 9)
-#define DRT_TRAS_MIN_8 (0 << 9)
-#define DRT_TRAS_MIN_7 (1 << 9)
-#define DRT_TRAS_MIN_6 (2 << 9)
-#define DRT_TRAS_MIN_5 (3 << 9)
-
-#endif /* NORTHBRIDGE_INTEL_I855_I855_H */
diff --git a/src/northbridge/intel/i855/northbridge.c b/src/northbridge/intel/i855/northbridge.c
deleted file mode 100644
index 3398d66ff4..0000000000
--- a/src/northbridge/intel/i855/northbridge.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Ronald G. Minnich
- * Copyright (C) 2003-2004 Eric W. Biederman
- * Copyright (C) 2006 Jon Dufresne <jon.dufresne@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/io.h>
-#include <stdint.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <stdlib.h>
-#include <string.h>
-#include <cbmem.h>
-#include <cpu/x86/cache.h>
-#include <cpu/cpu.h>
-
-static void northbridge_init(device_t dev)
-{
- printk(BIOS_SPEW, "Northbridge init\n");
-}
-
-static struct device_operations northbridge_operations = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = northbridge_init,
- .enable = 0,
- .ops_pci = 0,
-};
-
-static const struct pci_driver northbridge_driver __pci_driver = {
- .ops = &northbridge_operations,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x3580,
-};
-
-static void pci_domain_set_resources(device_t dev)
-{
- device_t mc_dev;
- uint32_t pci_tolm;
-
- printk(BIOS_DEBUG, "Entered with dev vid = %x\n", dev->vendor);
- printk(BIOS_DEBUG, "Entered with dev did = %x\n", dev->device);
-
- pci_tolm = find_pci_tolm(dev->link_list);
- mc_dev = dev->link_list->children->sibling;
- printk(BIOS_DEBUG, "MC dev vendor = %x\n", mc_dev->vendor);
- printk(BIOS_DEBUG, "MC dev device = %x\n", mc_dev->device);
-
- if (mc_dev) {
- /* Figure out which areas are/should be occupied by RAM.
- * This is all computed in kilobytes and converted to/from
- * the memory controller right at the edges.
- * Having different variables in different units is
- * too confusing to get right. Kilobytes are good up to
- * 4 Terabytes of RAM...
- */
- unsigned long tomk, tolmk;
- int idx;
-
- /* Get the value of the highest DRB. This tells the end of
- * the physical memory. The units are ticks of 32MB
- * i.e. 1 means 32MB.
- */
- tomk = (unsigned long)pci_read_config8(mc_dev, 0x43);
- tomk = tomk * 32 * 1024;
- /* add vga_mem detection */
- tomk = tomk - 16 * 1024;
- /* Compute the top of Low memory */
- tolmk = pci_tolm >> 10;
- if (tolmk >= tomk) {
- /* The PCI hole does not overlap memory
- */
- tolmk = tomk;
- }
- /* Write the RAM configuration registers,
- * preserving the reserved bits.
- */
-
- /* Report the memory regions */
- printk(BIOS_DEBUG, "tomk = %ld\n", tomk);
- printk(BIOS_DEBUG, "tolmk = %ld\n", tolmk);
-
- idx = 10;
- /* avoid pam region */
- ram_resource(dev, idx++, 0, 640);
- /* ram_resource(dev, idx++, 1024, tolmk - 1024); */
- ram_resource(dev, idx++, 768, tolmk - 768);
-
- set_late_cbmem_top(tomk * 1024);
- }
- assign_resources(dev->link_list);
-}
-
-static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- .enable_resources = NULL,
- .init = NULL,
- .scan_bus = pci_domain_scan_bus,
- .ops_pci_bus = pci_bus_default_ops,
-};
-
-static void cpu_bus_init(device_t dev)
-{
- initialize_cpus(dev->link_list);
-}
-
-static struct device_operations cpu_bus_ops = {
- .read_resources = DEVICE_NOOP,
- .set_resources = DEVICE_NOOP,
- .enable_resources = DEVICE_NOOP,
- .init = cpu_bus_init,
- .scan_bus = 0,
-};
-
-static void enable_dev(struct device *dev)
-{
- /* Set the operations if it is a special bus type */
- if (dev->path.type == DEVICE_PATH_DOMAIN) {
- dev->ops = &pci_domain_ops;
- }
- else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
- dev->ops = &cpu_bus_ops;
- }
-}
-
-struct chip_operations northbridge_intel_i855_ops = {
- CHIP_NAME("Intel 855 Northbridge")
- .enable_dev = enable_dev,
-};
diff --git a/src/northbridge/intel/i855/raminit.c b/src/northbridge/intel/i855/raminit.c
deleted file mode 100644
index 8041951c6f..0000000000
--- a/src/northbridge/intel/i855/raminit.c
+++ /dev/null
@@ -1,980 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 Jon Dufresne <jon.dufresne@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <assert.h>
-#include <lib.h>
-#include <spd.h>
-#include <sdram_mode.h>
-#include <stdlib.h>
-#include <delay.h>
-#include "i855.h"
-
-/*-----------------------------------------------------------------------------
-Macros and definitions:
------------------------------------------------------------------------------*/
-
-#define VALIDATE_DIMM_COMPATIBILITY
-
-/* Debugging macros. */
-#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP)
-#define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x)
-#define DUMPNORTH() dump_pci_device(NORTHBRIDGE_MMC)
-#else
-#define PRINTK_DEBUG(x...)
-#define DUMPNORTH()
-#endif
-
-#define delay() udelay(200)
-
-#define VG85X_MODE (SDRAM_BURST_4 | SDRAM_BURST_INTERLEAVED | SDRAM_CAS_2_5)
-
-/* DRC[10:8] - Refresh Mode Select (RMS).
- * 0x0 for Refresh Disabled (Self Refresh)
- * 0x1 for Refresh interval 15.6 us for 133MHz
- * 0x2 for Refresh interval 7.8 us for 133MHz
- * 0x7 for Refresh interval 64 Clocks. (Fast Refresh Mode)
- */
-#define RAM_COMMAND_REFRESH 0x1
-
-/* DRC[6:4] - SDRAM Mode Select (SMS). */
-#define RAM_COMMAND_SELF_REFRESH 0x0
-#define RAM_COMMAND_NOP 0x1
-#define RAM_COMMAND_PRECHARGE 0x2
-#define RAM_COMMAND_MRS 0x3
-#define RAM_COMMAND_EMRS 0x4
-#define RAM_COMMAND_CBR 0x6
-#define RAM_COMMAND_NORMAL 0x7
-
-/* DRC[29] - Initialization Complete (IC). */
-#define RAM_COMMAND_IC 0x1
-
-struct dimm_size {
- unsigned int side1;
- unsigned int side2;
-};
-
-static const uint32_t refresh_frequency[] = {
- /* Relative frequency (array value) of each E7501 Refresh Mode Select
- * (RMS) value (array index)
- * 0 == least frequent refresh (longest interval between refreshes)
- * [0] disabled -> 0
- * [1] 15.6 usec -> 2
- * [2] 7.8 usec -> 3
- * [3] 64 usec -> 1
- * [4] reserved -> 0
- * [5] reserved -> 0
- * [6] reserved -> 0
- * [7] 64 clocks -> 4
- */
- 0, 2, 3, 1, 0, 0, 0, 4
-};
-
-static const uint32_t refresh_rate_map[] = {
- /* Map the JEDEC spd refresh rates (array index) to i855 Refresh Mode
- * Select values (array value)
- * These are all the rates defined by JESD21-C Appendix D, Rev. 1.0
- * The i855 supports only 15.6 us (1), 7.8 us (2) and
- * 64 clock (481 ns) (7) refresh.
- * [0] == 15.625 us -> 15.6 us
- * [1] == 3.9 us -> 481 ns
- * [2] == 7.8 us -> 7.8 us
- * [3] == 31.3 us -> 15.6 us
- * [4] == 62.5 us -> 15.6 us
- * [5] == 125 us -> 15.6 us
- */
- 1, 7, 2, 1, 1, 1
-};
-
-#define MAX_SPD_REFRESH_RATE ((sizeof(refresh_rate_map) / sizeof(uint32_t)) - 1)
-
-/*-----------------------------------------------------------------------------
-SPD functions:
------------------------------------------------------------------------------*/
-
-static void die_on_spd_error(int spd_return_value)
-{
- if (spd_return_value < 0)
- PRINTK_DEBUG("Error reading SPD info: got %d\n", spd_return_value);
-/*
- if (spd_return_value < 0)
- die("Error reading SPD info\n");
-*/
-}
-
-/**
- * Calculate the page size for each physical bank of the DIMM:
- *
- * log2(page size) = (# columns) + log2(data width)
- *
- * NOTE: Page size is the total number of data bits in a row.
- *
- * @param dimm_socket_address SMBus address of DIMM socket to interrogate.
- * @return log2(page size) for each side of the DIMM.
- */
-static struct dimm_size sdram_spd_get_page_size(u8 dimm_socket_address)
-{
- uint16_t module_data_width;
- int value;
- struct dimm_size pgsz;
-
- pgsz.side1 = 0;
- pgsz.side2 = 0;
-
- // Side 1
- value = spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS);
- die_on_spd_error(value);
-
- pgsz.side1 = value & 0xf; // # columns in bank 1
-
- /* Get the module data width and convert it to a power of two */
- value = spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_MSB);
- die_on_spd_error(value);
-
- module_data_width = (value & 0xff) << 8;
-
- value = spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_LSB);
- die_on_spd_error(value);
-
- module_data_width |= (value & 0xff);
-
- pgsz.side1 += log2(module_data_width);
-
- /* side two */
- value = spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS);
- die_on_spd_error(value);
-
-/*
- if (value > 2)
- die("Bad SPD value\n");
-*/
- if (value > 2)
- PRINTK_DEBUG("Bad SPD value\n");
-
- if (value == 2) {
- pgsz.side2 = pgsz.side1; // Assume symmetric banks until we know differently
- value = spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS);
- die_on_spd_error(value);
-
- if ((value & 0xf0) != 0) {
- // Asymmetric banks
- pgsz.side2 -= value & 0xf; /* Subtract out columns on side 1 */
- pgsz.side2 += (value >> 4) & 0xf; /* Add in columns on side 2 */
- }
- }
-
- return pgsz;
-}
-
-/**
- * Read the width in bits of each DIMM side's DRAMs via SPD (i.e. 4, 8, 16).
- *
- * @param dimm_socket_address SMBus address of DIMM socket to interrogate.
- * @return Width in bits of each DIMM side's DRAMs.
- */
-static struct dimm_size sdram_spd_get_width(u8 dimm_socket_address)
-{
- int value;
- struct dimm_size width;
-
- width.side1 = 0;
- width.side2 = 0;
-
- value = spd_read_byte(dimm_socket_address, SPD_PRIMARY_SDRAM_WIDTH);
- die_on_spd_error(value);
-
- width.side1 = value & 0x7f; // Mask off bank 2 flag
-
- if (value & 0x80) {
- width.side2 = width.side1 << 1; // Bank 2 exists and is double-width
- } else {
- // If bank 2 exists, it's the same width as bank 1
- value = spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS);
- die_on_spd_error(value);
-
-#ifdef ROMCC_IF_BUG_FIXED
- if (value == 2)
- width.side2 = width.side1;
-#else
- switch (value) {
- case 2:
- width.side2 = width.side1;
- break;
-
- default:
- break;
- }
-#endif
- }
-
- return width;
-}
-
-/**
- * Calculate the log base 2 size in bits of both DIMM sides.
- *
- * log2(# bits) = (# columns) + log2(data width) +
- * (# rows) + log2(banks per SDRAM)
- *
- * Note that it might be easier to use SPD byte 31 here, it has the DIMM size
- * as a multiple of 4MB. The way we do it now we can size both sides of an
- * asymmetric DIMM.
- *
- * @param dimm SMBus address of DIMM socket to interrogate.
- * @return log2(number of bits) for each side of the DIMM.
- */
-static struct dimm_size spd_get_dimm_size(unsigned dimm)
-{
- int value;
-
- // Start with log2(page size)
- struct dimm_size sz = sdram_spd_get_page_size(dimm);
-
- if (sz.side1 > 0) {
- value = spd_read_byte(dimm, SPD_NUM_ROWS);
- die_on_spd_error(value);
-
- sz.side1 += value & 0xf;
-
- if (sz.side2 > 0) {
- // Double-sided DIMM
- if (value & 0xF0)
- sz.side2 += value >> 4; // Asymmetric
- else
- sz.side2 += value; // Symmetric
- }
-
- value = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM);
- die_on_spd_error(value);
-
- value = log2(value);
- sz.side1 += value;
- if (sz.side2 > 0)
- sz.side2 += value;
- }
-
- return sz;
-}
-
-/**
- * Scan for compatible DIMMs.
- *
- * @return A bitmask indicating which sockets contain a compatible DIMM.
- */
-static uint8_t spd_get_supported_dimms(void)
-{
- int i;
- uint8_t dimm_mask = 0;
-
- for (i = 0; i < DIMM_SOCKETS; i++) {
- u8 dimm = DIMM0 + i;
-
-#ifdef VALIDATE_DIMM_COMPATIBILITY
- struct dimm_size page_size;
- struct dimm_size sdram_width;
-#endif
- int spd_value;
-
- if (dimm == 0)
- continue; // No such socket on this mainboard
-
- if (spd_read_byte(dimm, SPD_MEMORY_TYPE) != SPD_MEMORY_TYPE_SDRAM_DDR)
- continue;
-
-#ifdef VALIDATE_DIMM_COMPATIBILITY
- if ((spd_value = spd_read_byte(dimm, SPD_MODULE_VOLTAGE)) != SPD_VOLTAGE_SSTL2) {
- PRINTK_DEBUG("Skipping DIMM with unsupported voltage: %02x\n", spd_value);
- continue; // Unsupported voltage
- }
-
-/*
- // E7501 does not support unregistered DIMMs
- spd_value = spd_read_byte(dimm, SPD_MODULE_ATTRIBUTES);
- if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0)) {
- PRINTK_DEBUG("Skipping unregistered DIMM: %02x\n", spd_value);
- continue;
- }
-*/
-
- page_size = sdram_spd_get_page_size(dimm);
- sdram_width = sdram_spd_get_width(dimm);
-
- // Validate DIMM page size
- // The i855 only supports page sizes of 4, 8, 16 KB per channel
- // NOTE: 4 KB = 32 Kb = 2^15
- // 16 KB = 128 Kb = 2^17
-
- if ((page_size.side1 < 15) || (page_size.side1 > 17)) {
- PRINTK_DEBUG("Skipping DIMM with unsupported page size: %d\n", page_size.side1);
- continue;
- }
-
- // If DIMM is double-sided, verify side2 page size
- if (page_size.side2 != 0) {
- if ((page_size.side2 < 15) || (page_size.side2 > 17)) {
- PRINTK_DEBUG("Skipping DIMM with unsupported page size: %d\n", page_size.side2);
- continue;
- }
- }
- // Validate SDRAM width
- // The i855 only supports x8 and x16 devices
- if ((sdram_width.side1 != 8) && (sdram_width.side1 != 16)) {
- PRINTK_DEBUG("Skipping DIMM with unsupported width: %d\n", sdram_width.side2);
- continue;
- }
-
- // If DIMM is double-sided, verify side2 width
- if (sdram_width.side2 != 0) {
- if ((sdram_width.side2 != 8)
- && (sdram_width.side2 != 16)) {
- PRINTK_DEBUG("Skipping DIMM with unsupported width: %d\n", sdram_width.side2);
- continue;
- }
- }
-#endif
- // Made it through all the checks, this DIMM is usable
- dimm_mask |= (1 << i);
- }
-
- return dimm_mask;
-}
-
-/*-----------------------------------------------------------------------------
-SDRAM configuration functions:
------------------------------------------------------------------------------*/
-
-static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits)
-{
- int i;
- u32 reg32;
- uint8_t dimm_start_32M_multiple = 0;
- uint16_t i855_mode_bits = jedec_mode_bits;
-
- /* Configure the RAM command. */
- reg32 = pci_read_config32(NORTHBRIDGE_MMC, DRC);
- reg32 &= ~(7 << 4);
- reg32 |= (command << 4);
- PRINTK_DEBUG(" Sending RAM command 0x%08x\n", reg32);
- pci_write_config32(NORTHBRIDGE_MMC, DRC, reg32);
-
- // RAM_COMMAND_NORMAL is an exception.
- // It affects only the memory controller and does not need to be "sent" to the DIMMs.
-
- if (command != RAM_COMMAND_NORMAL) {
-
- // Send the command to all DIMMs by accessing a memory location within each
- // NOTE: for mode select commands, some of the location address bits
- // are part of the command
-
- // Map JEDEC mode bits to i855
- if (command == RAM_COMMAND_MRS || command == RAM_COMMAND_EMRS) {
- /* Host address lines [13:3] map to DIMM address lines [11, 9:0] */
- i855_mode_bits = ((jedec_mode_bits & 0x800) << (13 - 11)) | ((jedec_mode_bits & 0x3ff) << (12 - 9));
- }
-
- for (i = 0; i < (DIMM_SOCKETS * 2); ++i) {
- uint8_t dimm_end_32M_multiple = pci_read_config8(NORTHBRIDGE_MMC, DRB + i);
- if (dimm_end_32M_multiple > dimm_start_32M_multiple) {
-
- uint32_t dimm_start_address = dimm_start_32M_multiple << 25;
- PRINTK_DEBUG(" Sending RAM command to 0x%08x\n", dimm_start_address + i855_mode_bits);
- read32((void *)(dimm_start_address + i855_mode_bits));
-
- // Set the start of the next DIMM
- dimm_start_32M_multiple = dimm_end_32M_multiple;
- }
- }
- }
-}
-
-static void set_initialize_complete(void)
-{
- uint32_t drc_reg;
-
- drc_reg = pci_read_config32(NORTHBRIDGE_MMC, DRC);
- drc_reg |= (1 << 29);
- pci_write_config32(NORTHBRIDGE_MMC, DRC, drc_reg);
-}
-
-static void sdram_enable(void)
-{
- int i;
-
- printk(BIOS_DEBUG, "Ram enable 1\n");
- delay();
- delay();
-
- /* NOP command */
- PRINTK_DEBUG(" NOP\n");
- do_ram_command(RAM_COMMAND_NOP, 0);
- delay();
- delay();
- delay();
-
- /* Pre-charge all banks (at least 200 us after NOP) */
- PRINTK_DEBUG(" Pre-charging all banks\n");
- do_ram_command(RAM_COMMAND_PRECHARGE, 0);
- delay();
- delay();
- delay();
-
- printk(BIOS_DEBUG, "Ram enable 4\n");
- do_ram_command(RAM_COMMAND_EMRS, SDRAM_EXTMODE_DLL_ENABLE);
- delay();
- delay();
- delay();
-
- printk(BIOS_DEBUG, "Ram enable 5\n");
- do_ram_command(RAM_COMMAND_MRS, VG85X_MODE | SDRAM_MODE_DLL_RESET);
-
- printk(BIOS_DEBUG, "Ram enable 6\n");
- do_ram_command(RAM_COMMAND_PRECHARGE, 0);
- delay();
- delay();
- delay();
-
- /* 8 CBR refreshes (Auto Refresh) */
- PRINTK_DEBUG(" 8 CBR refreshes\n");
- for (i = 0; i < 8; i++) {
- do_ram_command(RAM_COMMAND_CBR, 0);
- delay();
- delay();
- delay();
- }
-
- printk(BIOS_DEBUG, "Ram enable 8\n");
- do_ram_command(RAM_COMMAND_MRS, VG85X_MODE | SDRAM_MODE_NORMAL);
-
- /* Set GME-M Mode Select bits back to NORMAL operation mode */
- PRINTK_DEBUG(" Normal operation mode\n");
- do_ram_command(RAM_COMMAND_NORMAL, 0);
- delay();
- delay();
- delay();
-
- printk(BIOS_DEBUG, "Ram enable 9\n");
- set_initialize_complete();
-
- delay();
- delay();
- delay();
- delay();
- delay();
-
- printk(BIOS_DEBUG, "After configuration:\n");
- /* dump_pci_devices(); */
-
- /*
- printk(BIOS_DEBUG, "\n\n***** RAM TEST *****\n");
- ram_check(0, 0xa0000);
- ram_check(0x100000, 0x40000000);
- */
-}
-
-/*-----------------------------------------------------------------------------
-DIMM-independent configuration functions:
------------------------------------------------------------------------------*/
-
-/**
- * Set only what I need until it works, then make it figure things out on boot
- * assumes only one DIMM is populated.
- */
-static void sdram_set_registers(void)
-{
- /*
- printk(BIOS_DEBUG, "Before configuration:\n");
- dump_pci_devices();
- */
-}
-
-static void spd_set_row_attributes(uint8_t dimm_mask)
-{
- int i;
- uint16_t row_attributes = 0;
-
- for (i = 0; i < DIMM_SOCKETS; i++) {
- u8 dimm = DIMM0 + i;
- struct dimm_size page_size;
- struct dimm_size sdram_width;
-
- if (!(dimm_mask & (1 << i))) {
- row_attributes |= 0x77 << (i << 3);
- continue; // This DIMM not usable
- }
-
- // Get the relevant parameters via SPD
- page_size = sdram_spd_get_page_size(dimm);
- sdram_width = sdram_spd_get_width(dimm);
-
- // Update the DRAM Row Attributes.
- // Page size is encoded as log2(page size in bits) - log2(2 KB) or 4 KB == 1, 8 KB == 3, 16KB == 3
- // NOTE: 2 KB = 16 Kb = 2^14
- row_attributes |= (page_size.side1 - 14) << (i << 3); // Side 1 of each DIMM is an EVEN row
-
- if (sdram_width.side2 > 0)
- row_attributes |= (page_size.side2 - 14) << ((i << 3) + 4); // Side 2 is ODD
- else
- row_attributes |= 7 << ((i << 3) + 4);
- /* go to the next DIMM */
- }
-
- PRINTK_DEBUG("DRA: %04x\n", row_attributes);
-
- /* Write the new row attributes register */
- pci_write_config16(NORTHBRIDGE_MMC, DRA, row_attributes);
-}
-
-static void spd_set_dram_controller_mode(uint8_t dimm_mask)
-{
- int i;
-
- // Initial settings
- u32 controller_mode = pci_read_config32(NORTHBRIDGE_MMC, DRC);
- u32 system_refresh_mode = (controller_mode >> 7) & 7;
-
- controller_mode |= (1 << 20); // ECC
- controller_mode |= (1 << 15); // RAS lockout
- controller_mode |= (1 << 12); // Address Tri-state enable (ADRTRIEN), FIXME: how is this detected?????
- controller_mode |= (2 << 10); // FIXME: Undocumented, really needed?????
-
- for (i = 0; i < DIMM_SOCKETS; i++) {
- u8 dimm = DIMM0 + i;
- uint32_t dimm_refresh_mode;
- int value;
- u8 tRCD, tRP;
-
- if (!(dimm_mask & (1 << i))) {
- continue; // This DIMM not usable
- }
-
- // Disable ECC mode if any one of the DIMMs does not support ECC
- value = spd_read_byte(dimm, SPD_DIMM_CONFIG_TYPE);
- die_on_spd_error(value);
- if (value != ERROR_SCHEME_ECC)
- controller_mode &= ~(3 << 20);
-
- value = spd_read_byte(dimm, SPD_REFRESH);
- die_on_spd_error(value);
- value &= 0x7f; // Mask off self-refresh bit
- if (value > MAX_SPD_REFRESH_RATE) {
- printk(BIOS_ERR, "unsupported refresh rate\n");
- continue;
- }
- // Get the appropriate i855 refresh mode for this DIMM
- dimm_refresh_mode = refresh_rate_map[value];
- if (dimm_refresh_mode > 7) {
- printk(BIOS_ERR, "unsupported refresh rate\n");
- continue;
- }
- // If this DIMM requires more frequent refresh than others,
- // update the system setting
- if (refresh_frequency[dimm_refresh_mode] >
- refresh_frequency[system_refresh_mode])
- system_refresh_mode = dimm_refresh_mode;
-
- /* FIXME: is this correct? */
- tRCD = spd_read_byte(dimm, SPD_tRCD);
- tRP = spd_read_byte(dimm, SPD_tRP);
- if (tRCD != tRP) {
- PRINTK_DEBUG(" Disabling RAS lockout due to tRCD (%d) != tRP (%d)\n", tRCD, tRP);
- controller_mode &= ~(1 << 15);
- }
-
- /* go to the next DIMM */
- }
-
- controller_mode &= ~(7 << 7);
- controller_mode |= (system_refresh_mode << 7);
- PRINTK_DEBUG("DRC: %08x\n", controller_mode);
-
- pci_write_config32(NORTHBRIDGE_MMC, DRC, controller_mode);
-}
-
-static void spd_set_dram_timing(uint8_t dimm_mask)
-{
- int i;
- u32 dram_timing;
-
- // CAS# latency bitmasks in SPD_ACCEPTABLE_CAS_LATENCIES format
- // NOTE: i82822 supports only 2.0 and 2.5
- uint32_t system_compatible_cas_latencies = SPD_CAS_LATENCY_2_0 | SPD_CAS_LATENCY_2_5;
- uint8_t slowest_row_precharge = 0;
- uint8_t slowest_ras_cas_delay = 0;
- uint8_t slowest_active_to_precharge_delay = 0;
-
- for (i = 0; i < DIMM_SOCKETS; i++) {
- u8 dimm = DIMM0 + i;
- int value;
- uint32_t current_cas_latency;
- uint32_t dimm_compatible_cas_latencies;
- if (!(dimm_mask & (1 << i)))
- continue; // This DIMM not usable
-
- value = spd_read_byte(dimm, SPD_ACCEPTABLE_CAS_LATENCIES);
- PRINTK_DEBUG("SPD_ACCEPTABLE_CAS_LATENCIES: %d\n", value);
- die_on_spd_error(value);
-
- dimm_compatible_cas_latencies = value & 0x7f; // Start with all supported by DIMM
- PRINTK_DEBUG("dimm_compatible_cas_latencies #1: %d\n", dimm_compatible_cas_latencies);
-
- current_cas_latency = 1 << log2(dimm_compatible_cas_latencies); // Max supported by DIMM
- PRINTK_DEBUG("current_cas_latency: %d\n", current_cas_latency);
-
- // Can we support the highest CAS# latency?
- value = spd_read_byte(dimm, SPD_MIN_CYCLE_TIME_AT_CAS_MAX);
- die_on_spd_error(value);
- PRINTK_DEBUG("SPD_MIN_CYCLE_TIME_AT_CAS_MAX: %d.%d\n", value >> 4, value & 0xf);
-
- // NOTE: At 133 MHz, 1 clock == 7.52 ns
- if (value > 0x75) {
- // Our bus is too fast for this CAS# latency
- // Remove it from the bitmask of those supported by the DIMM that are compatible
- dimm_compatible_cas_latencies &= ~current_cas_latency;
- PRINTK_DEBUG("dimm_compatible_cas_latencies #2: %d\n", dimm_compatible_cas_latencies);
- }
- // Can we support the next-highest CAS# latency (max - 0.5)?
-
- current_cas_latency >>= 1;
- if (current_cas_latency != 0) {
- value = spd_read_byte(dimm, SPD_SDRAM_CYCLE_TIME_2ND);
- die_on_spd_error(value);
- PRINTK_DEBUG("SPD_SDRAM_CYCLE_TIME_2ND: %d.%d\n", value >> 4, value & 0xf);
- if (value > 0x75) {
- dimm_compatible_cas_latencies &= ~current_cas_latency;
- PRINTK_DEBUG("dimm_compatible_cas_latencies #2: %d\n", dimm_compatible_cas_latencies);
- }
- }
- // Can we support the next-highest CAS# latency (max - 1.0)?
- current_cas_latency >>= 1;
- if (current_cas_latency != 0) {
- value = spd_read_byte(dimm, SPD_SDRAM_CYCLE_TIME_3RD);
- PRINTK_DEBUG("SPD_SDRAM_CYCLE_TIME_3RD: %d.%d\n", value >> 4, value & 0xf);
- die_on_spd_error(value);
- if (value > 0x75) {
- dimm_compatible_cas_latencies &= ~current_cas_latency;
- PRINTK_DEBUG("dimm_compatible_cas_latencies #2: %d\n", dimm_compatible_cas_latencies);
- }
- }
- // Restrict the system to CAS# latencies compatible with this DIMM
- system_compatible_cas_latencies &= dimm_compatible_cas_latencies;
-
- value = spd_read_byte(dimm, SPD_MIN_ROW_PRECHARGE_TIME);
- die_on_spd_error(value);
- if (value > slowest_row_precharge)
- slowest_row_precharge = value;
-
- value = spd_read_byte(dimm, SPD_MIN_RAS_TO_CAS_DELAY);
- die_on_spd_error(value);
- if (value > slowest_ras_cas_delay)
- slowest_ras_cas_delay = value;
-
- value = spd_read_byte(dimm, SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY);
- die_on_spd_error(value);
- if (value > slowest_active_to_precharge_delay)
- slowest_active_to_precharge_delay = value;
-
- /* go to the next DIMM */
- }
- PRINTK_DEBUG("CAS latency: %d\n", system_compatible_cas_latencies);
-
- dram_timing = pci_read_config32(NORTHBRIDGE_MMC, DRT);
- dram_timing &= ~(DRT_CAS_MASK | DRT_TRP_MASK | DRT_RCD_MASK);
- PRINTK_DEBUG("DRT: %08x\n", dram_timing);
-
- if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_0) {
- dram_timing |= DRT_CAS_2_0;
- } else if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_5) {
- dram_timing |= DRT_CAS_2_5;
- } else
- die("No CAS# latencies compatible with all DIMMs!!\n");
-
- uint32_t current_cas_latency = dram_timing & DRT_CAS_MASK;
-
- /* tRP */
-
- PRINTK_DEBUG("slowest_row_precharge: %d.%d\n", slowest_row_precharge >> 2, slowest_row_precharge & 0x3);
- // i855 supports only 2, 3 or 4 clocks for tRP
- if (slowest_row_precharge > ((30 << 2)))
- die("unsupported DIMM tRP"); // > 30.0 ns: 5 or more clocks
- else if (slowest_row_precharge > ((22 << 2) | (2 << 0)))
- dram_timing |= DRT_TRP_4; // > 22.5 ns: 4 or more clocks
- else if (slowest_row_precharge > (15 << 2))
- dram_timing |= DRT_TRP_3; // > 15.0 ns: 3 clocks
- else
- dram_timing |= DRT_TRP_2; // <= 15.0 ns: 2 clocks
-
- /* tRCD */
-
- PRINTK_DEBUG("slowest_ras_cas_delay: %d.%d\n", slowest_ras_cas_delay >> 2, slowest_ras_cas_delay & 0x3);
- // i855 supports only 2, 3 or 4 clocks for tRCD
- if (slowest_ras_cas_delay > ((30 << 2)))
- die("unsupported DIMM tRCD"); // > 30.0 ns: 5 or more clocks
- else if (slowest_ras_cas_delay > ((22 << 2) | (2 << 0)))
- dram_timing |= DRT_RCD_4; // > 22.5 ns: 4 or more clocks
- else if (slowest_ras_cas_delay > (15 << 2))
- dram_timing |= DRT_RCD_3; // > 15.0 ns: 3 clocks
- else
- dram_timing |= DRT_RCD_2; // <= 15.0 ns: 2 clocks
-
- /* tRAS, min */
-
- PRINTK_DEBUG("slowest_active_to_precharge_delay: %d\n", slowest_active_to_precharge_delay);
- // i855 supports only 5, 6, 7 or 8 clocks for tRAS
- // 5 clocks ~= 37.6 ns, 6 clocks ~= 45.1 ns, 7 clocks ~= 52.6 ns, 8 clocks ~= 60.1 ns
- if (slowest_active_to_precharge_delay > 60)
- die("unsupported DIMM tRAS"); // > 52 ns: 8 or more clocks
- else if (slowest_active_to_precharge_delay > 52)
- dram_timing |= DRT_TRAS_MIN_8; // 46-52 ns: 7 clocks
- else if (slowest_active_to_precharge_delay > 45)
- dram_timing |= DRT_TRAS_MIN_7; // 46-52 ns: 7 clocks
- else if (slowest_active_to_precharge_delay > 37)
- dram_timing |= DRT_TRAS_MIN_6; // 38-45 ns: 6 clocks
- else
- dram_timing |= DRT_TRAS_MIN_5; // < 38 ns: 5 clocks
-
- /* FIXME: guess work starts here...
- *
- * Intel refers to DQ turn-around values for back to calculate the values,
- * but i have no idea what this means
- */
-
- /*
- * Back to Back Read-Write command spacing (DDR, different Rows/Bank)
- */
- /* Set to a 3 clock back to back read to write turn around.
- * 2 is a good delay if the CAS latency is 2.0 */
- dram_timing &= ~(3 << 28);
- if (current_cas_latency == DRT_CAS_2_0)
- dram_timing |= (2 << 28); // 2 clocks
- else
- dram_timing |= (1 << 28); // 3 clocks
-
- /*
- * Back to Back Read-Write command spacing (DDR, same or different Rows/Bank)
- */
- dram_timing &= ~(3 << 26);
- if (current_cas_latency == DRT_CAS_2_0)
- dram_timing |= (2 << 26); // 5 clocks
- else
- dram_timing |= (1 << 26); // 6 clocks
-
- /*
- * Back To Back Read-Read commands spacing (DDR, different Rows):
- */
- dram_timing &= ~(1 << 25);
- dram_timing |= (1 << 25); // 3 clocks
-
- PRINTK_DEBUG("DRT: %08x\n", dram_timing);
- pci_write_config32(NORTHBRIDGE_MMC, DRT, dram_timing);
-}
-
-static void spd_set_dram_size(uint8_t dimm_mask)
-{
- int i;
- int total_dram = 0;
- uint32_t drb_reg = 0;
-
- for (i = 0; i < DIMM_SOCKETS; i++) {
- u8 dimm = DIMM0 + i;
- struct dimm_size sz;
-
- if (!(dimm_mask & (1 << i))) {
- /* fill values even for not present DIMMs */
- drb_reg |= (total_dram << (i * 16));
- drb_reg |= (total_dram << ((i * 16) + 8));
-
- continue; // This DIMM not usable
- }
- sz = spd_get_dimm_size(dimm);
-
- total_dram += (1 << (sz.side1 - 28));
- drb_reg |= (total_dram << (i * 16));
-
- total_dram += (1 << (sz.side2 - 28));
- drb_reg |= (total_dram << ((i * 16) + 8));
- }
- PRINTK_DEBUG("DRB: %08x\n", drb_reg);
- pci_write_config32(NORTHBRIDGE_MMC, DRB, drb_reg);
-}
-
-
-static void spd_set_dram_pwr_management(void)
-{
- uint32_t pwrmg_reg;
-
- pwrmg_reg = 0x10f10430;
- pci_write_config32(NORTHBRIDGE_MMC, PWRMG, pwrmg_reg);
-}
-
-static void spd_set_dram_throttle_control(void)
-{
- uint32_t dtc_reg = 0;
-
- /* DDR SDRAM Throttle Mode (TMODE):
- * 0011 = Both Rank and GMCH Thermal Sensor based throttling is enabled. When the external SO-
- * DIMM Thermal Sensor is Tripped DDR SDRAM Throttling begins based on the setting in RTT
- */
- dtc_reg |= (3 << 28);
-
- /* Read Counter Based Power Throttle Control (RCTC):
- * 0 = 85%
- */
- dtc_reg |= (0 << 24);
-
- /* Write Counter Based Power Throttle Control (WCTC):
- * 0 = 85%
- */
- dtc_reg |= (0 << 20);
-
- /* Read Thermal Based Power Throttle Control (RTTC):
- * 0xA = 20%
- */
- dtc_reg |= (0xA << 16);
-
- /* Write Thermal Based Power Throttle Control (WTTC):
- * 0xA = 20%
- */
- dtc_reg |= (0xA << 12);
-
- /* Counter Based Throttle Lock (CTLOCK): */
- dtc_reg |= (0 << 11);
-
- /* Thermal Throttle Lock (TTLOCK): */
- dtc_reg |= (0 << 10);
-
- /* Thermal Power Throttle Control fields Enable: */
- dtc_reg |= (1 << 9);
-
- /* High Priority Stream Throttling Enable: */
- dtc_reg |= (0 << 8);
-
- /* Global DDR SDRAM Sampling Window (GDSW): */
- dtc_reg |= 0xff;
- PRINTK_DEBUG("DTC: %08x\n", dtc_reg);
- pci_write_config32(NORTHBRIDGE_MMC, DTC, dtc_reg);
-}
-
-static void spd_update(u8 reg, u32 new_value)
-{
-#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP)
- u32 value1 = pci_read_config32(NORTHBRIDGE_MMC, reg);
-#endif
- pci_write_config32(NORTHBRIDGE_MMC, reg, new_value);
-#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP)
- u32 value2 = pci_read_config32(NORTHBRIDGE_MMC, reg);
- PRINTK_DEBUG("update reg %02x, old: %08x, new: %08x, read back: %08x\n", reg, value1, new_value, value2);
-#endif
-}
-
-/* if RAM still doesn't work do this function */
-static void spd_set_undocumented_registers(void)
-{
- spd_update(0x74, 0x00000001);
- spd_update(0x78, 0x001fe974);
- spd_update(0x80, 0x00af0039);
- spd_update(0x84, 0x0000033c);
- spd_update(0x88, 0x00000010);
-
- spd_update(0xc0, 0x00000003);
-}
-
-static void northbridge_set_registers(void)
-{
- u16 value;
- int video_memory = 0;
-
- printk(BIOS_DEBUG, "Setting initial Northbridge registers....\n");
-
- /* Set the value for Fixed DRAM Hole Control Register */
- pci_write_config8(NORTHBRIDGE, FDHC, 0x00);
-
- /* Set the value for Programmable Attribute Map Registers
- * Ideally, this should be R/W for as many ranges as possible.
- */
- pci_write_config8(NORTHBRIDGE, PAM0, 0x30);
- pci_write_config8(NORTHBRIDGE, PAM1, 0x33);
- pci_write_config8(NORTHBRIDGE, PAM2, 0x33);
- pci_write_config8(NORTHBRIDGE, PAM3, 0x33);
- pci_write_config8(NORTHBRIDGE, PAM4, 0x33);
- pci_write_config8(NORTHBRIDGE, PAM5, 0x33);
- pci_write_config8(NORTHBRIDGE, PAM6, 0x33);
-
- /* Set the value for System Management RAM Control Register */
- pci_write_config8(NORTHBRIDGE, SMRAM, 0x02);
-
- /* Set the value for GMCH Control Register #1 */
- switch (CONFIG_VIDEO_MB) {
- case 1: /* 1M of memory */
- video_memory = 0x1;
- break;
- case 4: /* 4M of memory */
- video_memory = 0x2;
- break;
- case 8: /* 8M of memory */
- video_memory = 0x3;
- break;
- case 16: /* 16M of memory */
- video_memory = 0x4;
- break;
- case 32: /* 32M of memory */
- video_memory = 0x5;
- break;
- default: /* No memory */
- pci_write_config16(NORTHBRIDGE, GMC, pci_read_config16(NORTHBRIDGE, GMC) | 1);
- video_memory = 0x0;
- }
-
- value = pci_read_config16(NORTHBRIDGE, GGC);
- value |= video_memory << 4;
- if (video_memory == 0) {
- value &= ~(1 < 1);
- } else
- value |= (1 < 1);
- pci_write_config16(NORTHBRIDGE, GGC, value);
-
- /* AGPCMD: disable AGP, Data-Rate: 1x */
- pci_write_config32(NORTHBRIDGE, AGPCMD, 0x00000001);
-
- pci_write_config8(NORTHBRIDGE, AMTT, 0x20);
- pci_write_config8(NORTHBRIDGE, LPTT, 0x10);
-
- printk(BIOS_DEBUG, "Initial Northbridge registers have been set.\n");
-}
-
-static void sdram_set_spd_registers(void)
-{
- uint8_t dimm_mask;
-
- PRINTK_DEBUG("Reading SPD data...\n");
-
- dimm_mask = spd_get_supported_dimms();
-
- if (dimm_mask == 0) {
- printk(BIOS_DEBUG, "No usable memory for this controller\n");
- } else {
- PRINTK_DEBUG("DIMM MASK: %02x\n", dimm_mask);
-
- spd_set_row_attributes(dimm_mask);
- spd_set_dram_controller_mode(dimm_mask);
- spd_set_dram_timing(dimm_mask);
- spd_set_dram_size(dimm_mask);
- spd_set_dram_pwr_management();
- spd_set_dram_throttle_control();
- spd_set_undocumented_registers();
- }
-
- /* Setup Initial Northbridge Registers */
- northbridge_set_registers();
-}
diff --git a/src/northbridge/intel/i855/raminit.h b/src/northbridge/intel/i855/raminit.h
deleted file mode 100644
index 31f57a1fe3..0000000000
--- a/src/northbridge/intel/i855/raminit.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 Jon Dufresne <jon.dufresne@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef NORTHBRIDGE_INTEL_I855_RAMINIT_H
-#define NORTHBRIDGE_INTEL_I855_RAMINIT_H
-
-/* i855 Northbridge PCI devices */
-#define NORTHBRIDGE PCI_DEV(0, 0, 0)
-#define NORTHBRIDGE_MMC PCI_DEV(0, 0, 1)
-
-/* The i855 supports max. 2 dual-sided SO-DIMMs. */
-#define DIMM_SOCKETS 2
-
-void sdram_initialize(void);
-
-#endif /* NORTHBRIDGE_INTEL_I855_RAMINIT_H */
diff --git a/src/northbridge/intel/i855/reset_test.c b/src/northbridge/intel/i855/reset_test.c
deleted file mode 100644
index 9ca7854d47..0000000000
--- a/src/northbridge/intel/i855/reset_test.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 Jon Dufresne <jon.dufresne@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define MCH_DRC 0x70
-#define DRC_DONE (1 << 29)
-
- /* If I have already booted once skip a bunch of initialization */
- /* To see if I have already booted I check to see if memory
- * has been enabled.
- */
-static int bios_reset_detected(void)
-{
- uint32_t dword;
-
- dword = pci_read_config32(PCI_DEV(0, 0, 0), MCH_DRC);
-
- if ( (dword & DRC_DONE) != 0 ) {
- return 1;
- }
-
- return 0;
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 03:59:09 +0000