diff options
| -rw-r--r-- | src/mainboard/amd/mandolin/Kconfig | 13 | ||||
| -rw-r--r-- | src/mainboard/amd/mandolin/Kconfig.name | 3 | ||||
| -rw-r--r-- | src/mainboard/amd/mandolin/Makefile.inc | 4 | ||||
| -rw-r--r-- | src/mainboard/amd/mandolin/variants/cereme/board.fmd | 8 | ||||
| -rw-r--r-- | src/mainboard/amd/mandolin/variants/cereme/devicetree.cb | 184 | ||||
| -rw-r--r-- | src/mainboard/amd/mandolin/variants/cereme/early_gpio.c | 32 | ||||
| -rw-r--r-- | src/mainboard/amd/mandolin/variants/cereme/gpio.c | 33 | ||||
| -rw-r--r-- | src/mainboard/amd/mandolin/variants/cereme/port_descriptors.c | 87 |
8 files changed, 362 insertions, 2 deletions
diff --git a/src/mainboard/amd/mandolin/Kconfig b/src/mainboard/amd/mandolin/Kconfig index 63b6306df8..8e2bd8ba28 100644 --- a/src/mainboard/amd/mandolin/Kconfig +++ b/src/mainboard/amd/mandolin/Kconfig @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only -if BOARD_AMD_MANDOLIN +if BOARD_AMD_MANDOLIN || BOARD_AMD_CEREME config BOARD_SPECIFIC_OPTIONS def_bool y @@ -8,6 +8,7 @@ config BOARD_SPECIFIC_OPTIONS select SOC_AMD_PICASSO select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_8192 if BOARD_AMD_MANDOLIN + select BOARD_ROMSIZE_KB_16384 if BOARD_AMD_CEREME select AZALIA_PLUGIN_SUPPORT select HAVE_ACPI_RESUME select DRIVERS_UART_ACPI @@ -31,6 +32,7 @@ config AMD_LPC_DEBUG_CARD config CBFS_SIZE hex default 0x7cf000 if BOARD_AMD_MANDOLIN # Maximum size for the Mandolin FMAP + default 0xfcf000 if BOARD_AMD_CEREME # Maximum size for the Cereme FMAP config MAINBOARD_DIR string @@ -39,10 +41,12 @@ config MAINBOARD_DIR config VARIANT_DIR string default "mandolin" if BOARD_AMD_MANDOLIN + default "cereme" if BOARD_AMD_CEREME config MAINBOARD_PART_NUMBER string default "MANDOLIN" if BOARD_AMD_MANDOLIN + default "CEREME" if BOARD_AMD_CEREME config DEVICETREE string @@ -59,6 +63,7 @@ config ONBOARD_VGA_IS_PRIMARY config AMD_FWM_POSITION_INDEX int default 3 if BOARD_AMD_MANDOLIN + default 4 if BOARD_AMD_CEREME help TODO: might need to be adapted for better placement of files in cbfs @@ -70,6 +75,7 @@ config MANDOLIN_MCHP_FW_FILE string depends on MANDOLIN_HAVE_MCHP_FW default "3rdparty/blobs/mainboard/amd/mandolin/EC_mandolin.bin" if BOARD_AMD_MANDOLIN + default "3rdparty/blobs/mainboard/amd/mandolin/EC_cereme.bin" if BOARD_AMD_CEREME if !AMD_LPC_DEBUG_CARD choice @@ -106,19 +112,22 @@ config VGA_BIOS_DGPU_ID config VGA_BIOS_DGPU_FILE string default "3rdparty/amd_blobs/picasso/PicassoGenericVbios.bin" if BOARD_AMD_MANDOLIN + default "3rdparty/amd_blobs/picasso/Raven2GenericVbios.bin" if BOARD_AMD_CEREME config EFS_SPI_READ_MODE int default 0 if EM100 + default 0 if BOARD_AMD_CEREME default 3 config EFS_SPI_SPEED int default 3 if EM100 + default 1 if BOARD_AMD_CEREME default 0 config EFS_SPI_MICRON_FLAG int default 0 -endif # BOARD_AMD_MANDOLIN +endif # BOARD_AMD_MANDOLIN || BOARD_AMD_CEREME diff --git a/src/mainboard/amd/mandolin/Kconfig.name b/src/mainboard/amd/mandolin/Kconfig.name index 7dbfc3fd71..6f512337a3 100644 --- a/src/mainboard/amd/mandolin/Kconfig.name +++ b/src/mainboard/amd/mandolin/Kconfig.name @@ -1,2 +1,5 @@ config BOARD_AMD_MANDOLIN bool "Mandolin" + +config BOARD_AMD_CEREME + bool "Cereme" diff --git a/src/mainboard/amd/mandolin/Makefile.inc b/src/mainboard/amd/mandolin/Makefile.inc index 6d7bf3a8b9..778701834f 100644 --- a/src/mainboard/amd/mandolin/Makefile.inc +++ b/src/mainboard/amd/mandolin/Makefile.inc @@ -10,7 +10,11 @@ ifneq ($(CONFIG_PICASSO_LPC_IOMUX),y) ramstage-y += emmc_gpio.c endif +ifeq ($(CONFIG_BOARD_AMD_MANDOLIN),y) APCB_SOURCES = $(MAINBOARD_BLOBS_DIR)/APCB_mandolin.bin +else # CONFIG_BOARD_AMD_CEREME +APCB_SOURCES = $(MAINBOARD_BLOBS_DIR)/APCB_cereme.bin +endif PHONY+=add_mchp_fw INTERMEDIATE+=add_mchp_fw diff --git a/src/mainboard/amd/mandolin/variants/cereme/board.fmd b/src/mainboard/amd/mandolin/variants/cereme/board.fmd new file mode 100644 index 0000000000..b55b8b506a --- /dev/null +++ b/src/mainboard/amd/mandolin/variants/cereme/board.fmd @@ -0,0 +1,8 @@ +FLASH@0xFF000000 16M { + BIOS { + EC 0x20000 + RW_MRC_CACHE 0x10000 + FMAP 0x1000 + COREBOOT(CBFS) + } +} diff --git a/src/mainboard/amd/mandolin/variants/cereme/devicetree.cb b/src/mainboard/amd/mandolin/variants/cereme/devicetree.cb new file mode 100644 index 0000000000..155328871c --- /dev/null +++ b/src/mainboard/amd/mandolin/variants/cereme/devicetree.cb @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: GPL-2.0-only + +chip soc/amd/picasso + register "acp_pin_cfg" = "I2S_PINS_MAX_HDA" + + # Set FADT Configuration + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042" + register "fadt_flags" = "ACPI_FADT_SLEEP_BUTTON" # See table 5-34 ACPI 6.3 spec + + register "emmc_config" = "{ + .timing = SD_EMMC_DISABLE, + }" + + register "has_usb2_phy_tune_params" = "1" + + # Controller0 Port0 Default + register "usb_2_port_tune_params[0]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port1 Default + register "usb_2_port_tune_params[1]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port2 Default + register "usb_2_port_tune_params[2]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port3 Default + register "usb_2_port_tune_params[3]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port4 Default + register "usb_2_port_tune_params[4]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x02, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x5, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port5 Default + register "usb_2_port_tune_params[5]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x02, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x5, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # USB OC pin mapping; all ports share one OC pin + register "usb_port_overcurrent_pin[0]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[1]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[2]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[3]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[4]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[5]" = "USB_OC_PIN_0" + + # SPI Configuration + register "common_config.spi_config" = "{ + .normal_speed = SPI_SPEED_33M, /* MHz */ + .fast_speed = SPI_SPEED_66M, /* MHz */ + .altio_speed = SPI_SPEED_33M, /* MHz */ + .tpm_speed = SPI_SPEED_33M, /* MHz */ + .read_mode = SPI_READ_MODE_QUAD114, + }" + + # eSPI Configuration + register "common_config.espi_config" = "{ + .std_io_decode_bitmap = ESPI_DECODE_IO_0X60_0X64_EN, + .generic_io_range[0] = { + .base = 0x662, + .size = 8, + }, + + .io_mode = ESPI_IO_MODE_SINGLE, + .op_freq_mhz = ESPI_OP_FREQ_33_MHZ, + .crc_check_enable = 1, + .dedicated_alert_pin = 1, + .periph_ch_en = 0, + .vw_ch_en = 0, + .oob_ch_en = 0, + .flash_ch_en = 0, + }" + + # genral purpose PCIe clock output configuration + register "gpp_clk_config[0]" = "GPP_CLK_REQ" + register "gpp_clk_config[1]" = "GPP_CLK_REQ" + register "gpp_clk_config[2]" = "GPP_CLK_REQ" + register "gpp_clk_config[3]" = "GPP_CLK_OFF" + register "gpp_clk_config[4]" = "GPP_CLK_REQ" + register "gpp_clk_config[5]" = "GPP_CLK_OFF" + register "gpp_clk_config[6]" = "GPP_CLK_OFF" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 on end # Dummy Host Bridge + device pci 1.1 on end # Bridge to PCIe Ethernet chip + device pci 8.0 on end # Dummy Host Bridge + device pci 8.1 on # Bridge to Bus A + device pci 0.0 on end # Internal GPU + device pci 0.1 on end # Display HDA + device pci 0.2 on end # Crypto Coprocessor + device pci 0.3 on end # USB 3.1 + device pci 0.4 off end # USB 3.1 + device pci 0.5 on end # Audio + device pci 0.6 on end # HDA + device pci 0.7 on end # non-Sensor Fusion Hub device + end + device pci 8.2 on # Bridge to Bus B + device pci 0.0 off end # AHCI + device pci 0.1 off end # integrated Ethernet MAC + device pci 0.2 off end # integrated Ethernet MAC + end + device pci 14.0 on end # SMBus + device pci 14.3 on # D14F3 bridge + chip superio/smsc/sio1036 # optional debug card + end + end + device pci 14.6 off end # SDHCI + device pci 18.0 on end # Data fabric [0-7] + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + device pci 18.6 on end + device pci 18.7 on end + end # domain + + device mmio 0xfedc9000 on end # UART0 + device mmio 0xfedca000 on end # UART1 + device mmio 0xfedce000 off end # UART2 + device mmio 0xfedcf000 off end # UART3 + +end # chip soc/amd/picasso diff --git a/src/mainboard/amd/mandolin/variants/cereme/early_gpio.c b/src/mainboard/amd/mandolin/variants/cereme/early_gpio.c new file mode 100644 index 0000000000..b4ee5f485a --- /dev/null +++ b/src/mainboard/amd/mandolin/variants/cereme/early_gpio.c @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <soc/gpio.h> +#include "../../gpio.h" + +/* GPIO pins used by coreboot should be initialized in bootblock */ + +static const struct soc_amd_gpio gpio_set_stage_reset[] = { + /* not LLB */ + PAD_GPI(GPIO_12, PULL_UP), + /* not USB_OC1_L */ + PAD_GPI(GPIO_17, PULL_UP), + /* not USB_OC2_L */ + PAD_GPI(GPIO_18, PULL_UP), + /* SDIO eMMC power control */ + PAD_NF(GPIO_22, EMMC_PRW_CTRL, PULL_NONE), + /* PCIe Reset 0 */ + PAD_NF(GPIO_26, PCIE_RST_L, PULL_NONE), + /* PCIe Reset 1 */ + PAD_NF(GPIO_27, PCIE_RST1_L, PULL_NONE), + /* eSPI CS# */ + PAD_NF(GPIO_30, ESPI_CS_L, PULL_NONE), + /* FANOUT0 */ + PAD_NF(GPIO_85, FANOUT0, PULL_NONE), + /* PC beep to codec */ + PAD_NF(GPIO_91, SPKR, PULL_NONE), +}; + +void mainboard_program_early_gpios(void) +{ + program_gpios(gpio_set_stage_reset, ARRAY_SIZE(gpio_set_stage_reset)); +} diff --git a/src/mainboard/amd/mandolin/variants/cereme/gpio.c b/src/mainboard/amd/mandolin/variants/cereme/gpio.c new file mode 100644 index 0000000000..0ba2580ce1 --- /dev/null +++ b/src/mainboard/amd/mandolin/variants/cereme/gpio.c @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <soc/gpio.h> +#include "../../gpio.h" + +/* + * As a rule of thumb, GPIO pins used by coreboot should be initialized at + * bootblock while GPIO pins used only by the OS should be initialized at + * ramstage. + */ +static const struct soc_amd_gpio gpio_set_stage_ram[] = { + /* EC SCI# */ + PAD_SCI(GPIO_6, PULL_UP, EDGE_LOW), + /* I2S SDIN */ + PAD_NF(GPIO_7, ACP_I2S_SDIN, PULL_NONE), + /* I2S LRCLK */ + PAD_NF(GPIO_8, ACP_I2S_LRCLK, PULL_NONE), + /* not Blink */ + PAD_GPI(GPIO_11, PULL_UP), + /* APU_ALS_INT# */ + PAD_SCI(GPIO_24, PULL_UP, EDGE_LOW), + /* SD card detect */ + PAD_GPI(GPIO_31, PULL_UP), + /* NFC IRQ */ + PAD_INT(GPIO_69, PULL_UP, EDGE_LOW, STATUS), + /* NFC wake output# */ + PAD_GPO(GPIO_89, HIGH), +}; + +void mainboard_program_gpios(void) +{ + program_gpios(gpio_set_stage_ram, ARRAY_SIZE(gpio_set_stage_ram)); +} diff --git a/src/mainboard/amd/mandolin/variants/cereme/port_descriptors.c b/src/mainboard/amd/mandolin/variants/cereme/port_descriptors.c new file mode 100644 index 0000000000..8fc94f8c3b --- /dev/null +++ b/src/mainboard/amd/mandolin/variants/cereme/port_descriptors.c @@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <soc/platform_descriptors.h> +#include <types.h> + +static const fsp_dxio_descriptor pollock_dxio_descriptors[] = { + { /* NVME SSD */ + .port_present = true, + .engine_type = PCIE_ENGINE, + .start_logical_lane = 0, + .end_logical_lane = 0, + .device_number = 1, + .function_number = 3, + .link_aspm = ASPM_L1, + .link_aspm_L1_1 = true, + .link_aspm_L1_2 = true, + .turn_off_unused_lanes = true, + .clk_req = CLK_REQ0 + }, + { /* WWAN */ + .port_present = true, + .engine_type = PCIE_ENGINE, + .start_logical_lane = 1, + .end_logical_lane = 1, + .device_number = 1, + .function_number = 4, + .link_aspm = ASPM_L1, + .link_aspm_L1_1 = true, + .link_aspm_L1_2 = true, + .turn_off_unused_lanes = true, + .clk_req = CLK_REQ2 + }, + { /* LAN */ + .port_present = true, + .engine_type = PCIE_ENGINE, + .start_logical_lane = 4, + .end_logical_lane = 4, + .device_number = 1, + .function_number = 1, + .link_aspm = ASPM_L1, + .link_aspm_L1_1 = true, + .link_aspm_L1_2 = true, + .turn_off_unused_lanes = true, + .clk_req = CLK_REQ1 + }, + { /* WLAN */ + .port_present = true, + .engine_type = PCIE_ENGINE, + .start_logical_lane = 5, + .end_logical_lane = 5, + .device_number = 1, + .function_number = 2, + .link_aspm = ASPM_L1, + .link_aspm_L1_1 = true, + .link_aspm_L1_2 = true, + .turn_off_unused_lanes = true, + .clk_req = CLK_REQ4 + } +}; + +fsp_ddi_descriptor pollock_ddi_descriptors[] = { + { /* DDI0 - eDP */ + .connector_type = EDP, + .aux_index = AUX1, + .hdp_index = HDP1 + }, + { /* DDI1 - DP */ + .connector_type = DP, + .aux_index = AUX2, + .hdp_index = HDP2 + }, + { /* DDI2 - DP */ + .connector_type = DP, + .aux_index = AUX4, + .hdp_index = HDP4, + } +}; + +void mainboard_get_dxio_ddi_descriptors( + const fsp_dxio_descriptor **dxio_descs, size_t *dxio_num, + const fsp_ddi_descriptor **ddi_descs, size_t *ddi_num) +{ + *dxio_descs = pollock_dxio_descriptors; + *dxio_num = ARRAY_SIZE(pollock_dxio_descriptors); + *ddi_descs = pollock_ddi_descriptors; + *ddi_num = ARRAY_SIZE(pollock_ddi_descriptors); +} |