diff options
| -rw-r--r-- | src/cpu/amd/model_lx/cpureginit.c | 18 | ||||
| -rw-r--r-- | src/cpu/amd/model_lx/vsmsetup.c | 3 | ||||
| -rw-r--r-- | src/include/cpu/amd/geode_post_code.h | 310 | ||||
| -rw-r--r-- | src/include/cpu/amd/vr.h | 3 | ||||
| -rw-r--r-- | src/northbridge/amd/lx/northbridge.c | 5 | ||||
| -rw-r--r-- | src/southbridge/amd/cs5536/cs5536.c | 6 | ||||
| -rw-r--r-- | src/southbridge/amd/cs5536/cs5536_early_setup.c | 8 |
7 files changed, 170 insertions, 183 deletions
diff --git a/src/cpu/amd/model_lx/cpureginit.c b/src/cpu/amd/model_lx/cpureginit.c index e4a29b9b78..2624b54836 100644 --- a/src/cpu/amd/model_lx/cpureginit.c +++ b/src/cpu/amd/model_lx/cpureginit.c @@ -101,11 +101,6 @@ void SetDelayControl(void) ;1 16 400MHz 0x82*10055 0x56960004 4 ; ;2 4,4 400MHz 0x82710000 0x56960004 4 -;2 8,8 400MHz 0xC27100A5 0x56960004 4 *** OUT OF PUBLISHED ENVELOPE *** -; -;2 16,4 >333 0xB27100A5 0x56960004 4 *** OUT OF PUBLISHED ENVELOPE *** -;2 16,8 >333 0xB27100A5 0x56960004 4 *** OUT OF PUBLISHED ENVELOPE *** -;2 16,16 >333 0xB2710000 0x56960004 4 *** OUT OF PUBLISHED ENVELOPE *** ; ;1 4 <=333MHz 0x83*100FF 0x56960004 3 ;1 8 <=333MHz 0x83*100AA 0x56960004 3 @@ -114,9 +109,6 @@ void SetDelayControl(void) ;2 4,4 <=333MHz 0x837100A5 0x56960004 3 ;2 8,8 <=333MHz 0x937100A5 0x56960004 3 ; -;2 16,4 <=333MHz 0xB37100A5 0x56960004 3 *** OUT OF PUBLISHED ENVELOPE *** -;2 16,8 <=333MHz 0xB37100A5 0x56960004 3 *** OUT OF PUBLISHED ENVELOPE *** -;2 16,16 <=333MHz 0xB37100A5 0x56960004 3 *** OUT OF PUBLISHED ENVELOPE *** ;========================================================================= ;* - Bit 55 (disable SDCLK 1,3,5) should be set if there is a single DIMM in slot 0, ; but it should be clear for all 2 DIMM settings and if a single DIMM is in slot 1. @@ -130,9 +122,9 @@ void SetDelayControl(void) ; DIMM Max MBUS ;DIMMs devices Frequency MCP 0x4C00000F Setting ;----- ------- --------- ---------------------- -;1 4 400MHz 0xF2F100FF 0x56960004 4 The MC changes improve Salsa. -;1 8 400MHz 0xF2F100FF 0x56960004 4 Delay controls no real change, -;1 4 <=333MHz 0xF2F100FF 0x56960004 3 just fixing typo in left side. +;1 4 400MHz 0xF2F100FF 0x56960004 4 The No VTT changes improve timing. +;1 8 400MHz 0xF2F100FF 0x56960004 4 +;1 4 <=333MHz 0xF2F100FF 0x56960004 3 ;1 8 <=333MHz 0xF2F100FF 0x56960004 3 ;1 16 <=333MHz 0xF2F100FF 0x56960004 3 */ @@ -233,8 +225,8 @@ void cpuRegInit(void) wrmsr(msrnum, msr); /* - ; Castle performance setting. - ; Enable Quack for fewer re-RAS on the MC + * LX performance setting. + * Enable Quack for fewer re-RAS on the MC */ msrnum = GLIU0_ARB; msr = rdmsr(msrnum); diff --git a/src/cpu/amd/model_lx/vsmsetup.c b/src/cpu/amd/model_lx/vsmsetup.c index 35c1381187..8ad0a3b41d 100644 --- a/src/cpu/amd/model_lx/vsmsetup.c +++ b/src/cpu/amd/model_lx/vsmsetup.c @@ -290,8 +290,7 @@ void do_vsmbios(void) /* this is the base of rom on the LX at present. At some point, this has to be * much better parameterized */ - /* the VSA starts at the base of rom - 64 */ - //rom = ((unsigned long) 0) - (ROM_SIZE + 64*1024); + //VSA is cat onto the end after LB builds rom = ((unsigned long)0) - (ROM_SIZE + 36 * 1024); buf = (unsigned char *)VSA2_BUFFER; diff --git a/src/include/cpu/amd/geode_post_code.h b/src/include/cpu/amd/geode_post_code.h index 5a0e57689a..72ee5e3cf7 100644 --- a/src/include/cpu/amd/geode_post_code.h +++ b/src/include/cpu/amd/geode_post_code.h @@ -19,178 +19,178 @@ /* standard AMD post definitions -- might as well use them. */ #define POST_Output_Port (0x080) /* port to write post codes to*/ -#define POST_preSioInit (0x000) /* geode.asm*/ -#define POST_clockInit (0x001) /* geode.asm*/ -#define POST_CPURegInit (0x002) /* geode.asm*/ -#define POST_UNREAL (0x003) /* geode.asm*/ -#define POST_CPUMemRegInit (0x004) /* geode.asm*/ -#define POST_CPUTest (0x005) /* geode.asm*/ -#define POST_memSetup (0x006) /* geode.asm*/ -#define POST_memSetUpStack (0x007) /* geode.asm*/ -#define POST_memTest (0x008) /* geode.asm*/ -#define POST_shadowRom (0x009) /* geode.asm*/ -#define POST_memRAMoptimize (0x00A) /* geode.asm*/ -#define POST_cacheInit (0x00B) /* geode.asm*/ -#define POST_northBridgeInit (0x00C) /* geode.asm*/ -#define POST_chipsetInit (0x00D) /* geode.asm*/ -#define POST_sioTest (0x00E) /* geode.asm*/ -#define POST_pcATjunk (0x00F) /* geode.asm*/ - - -#define POST_intTable (0x010) /* geode.asm*/ -#define POST_memInfo (0x011) /* geode.asm*/ -#define POST_romCopy (0x012) /* geode.asm*/ -#define POST_PLLCheck (0x013) /* geode.asm*/ -#define POST_keyboardInit (0x014) /* geode.asm*/ -#define POST_cpuCacheOff (0x015) /* geode.asm*/ -#define POST_BDAInit (0x016) /* geode.asm*/ -#define POST_pciScan (0x017) /* geode.asm*/ -#define POST_optionRomInit (0x018) /* geode.asm*/ -#define POST_ResetLimits (0x019) /* geode.asm*/ -#define POST_summary_screen (0x01A) /* geode.asm*/ -#define POST_Boot (0x01B) /* geode.asm*/ -#define POST_SystemPreInit (0x01C) /* geode.asm*/ -#define POST_ClearRebootFlag (0x01D) /* geode.asm*/ -#define POST_GLIUInit (0x01E) /* geode.asm*/ -#define POST_BootFailed (0x01F) /* geode.asm*/ - - -#define POST_CPU_ID (0x020) /* cpucpuid.asm*/ -#define POST_COUNTERBROKEN (0x021) /* pllinit.asm*/ -#define POST_DIFF_DIMMS (0x022) /* pllinit.asm*/ -#define POST_WIGGLE_MEM_LINES (0x023) /* pllinit.asm*/ -#define POST_NO_GLIU_DESC (0x024) /* pllinit.asm*/ -#define POST_CPU_LCD_CHECK (0x025) /* pllinit.asm*/ -#define POST_CPU_LCD_PASS (0x026) /* pllinit.asm*/ -#define POST_CPU_LCD_FAIL (0x027) /* pllinit.asm*/ -#define POST_CPU_STEPPING (0x028) /* cpucpuid.asm*/ -#define POST_CPU_DM_BIST_FAILURE (0x029) /* gx2reg.asm*/ -#define POST_CPU_FLAGS (0x02A) /* cpucpuid.asm*/ -#define POST_CHIPSET_ID (0x02b) /* chipset.asm*/ -#define POST_CHIPSET_ID_PASS (0x02c) /* chipset.asm*/ -#define POST_CHIPSET_ID_FAIL (0x02d) /* chipset.asm*/ -#define POST_CPU_ID_GOOD (0x02E) /* cpucpuid.asm*/ -#define POST_CPU_ID_FAIL (0x02F) /* cpucpuid.asm*/ +#define POST_preSioInit (0x000) +#define POST_clockInit (0x001) +#define POST_CPURegInit (0x002) +#define POST_UNREAL (0x003) +#define POST_CPUMemRegInit (0x004) +#define POST_CPUTest (0x005) +#define POST_memSetup (0x006) +#define POST_memSetUpStack (0x007) +#define POST_memTest (0x008) +#define POST_shadowRom (0x009) +#define POST_memRAMoptimize (0x00A) +#define POST_cacheInit (0x00B) +#define POST_northBridgeInit (0x00C) +#define POST_chipsetInit (0x00D) +#define POST_sioTest (0x00E) +#define POST_pcATjunk (0x00F) + + +#define POST_intTable (0x010) +#define POST_memInfo (0x011) +#define POST_romCopy (0x012) +#define POST_PLLCheck (0x013) +#define POST_keyboardInit (0x014) +#define POST_cpuCacheOff (0x015) +#define POST_BDAInit (0x016) +#define POST_pciScan (0x017) +#define POST_optionRomInit (0x018) +#define POST_ResetLimits (0x019) +#define POST_summary_screen (0x01A) +#define POST_Boot (0x01B) +#define POST_SystemPreInit (0x01C) +#define POST_ClearRebootFlag (0x01D) +#define POST_GLIUInit (0x01E) +#define POST_BootFailed (0x01F) + + +#define POST_CPU_ID (0x020) +#define POST_COUNTERBROKEN (0x021) +#define POST_DIFF_DIMMS (0x022) +#define POST_WIGGLE_MEM_LINES (0x023) +#define POST_NO_GLIU_DESC (0x024) +#define POST_CPU_LCD_CHECK (0x025) +#define POST_CPU_LCD_PASS (0x026) +#define POST_CPU_LCD_FAIL (0x027) +#define POST_CPU_STEPPING (0x028) +#define POST_CPU_DM_BIST_FAILURE (0x029) +#define POST_CPU_FLAGS (0x02A) +#define POST_CHIPSET_ID (0x02b) +#define POST_CHIPSET_ID_PASS (0x02c) +#define POST_CHIPSET_ID_FAIL (0x02d) +#define POST_CPU_ID_GOOD (0x02E) +#define POST_CPU_ID_FAIL (0x02F) /* PCI config*/ -#define P80_PCICFG (0x030) /* pcispace.asm*/ +#define P80_PCICFG (0x030) /* PCI io*/ -#define P80_PCIIO (0x040) /* pcispace.asm*/ +#define P80_PCIIO (0x040) /* PCI memory*/ -#define P80_PCIMEM (0x050) /* pcispace.asm*/ +#define P80_PCIMEM (0x050) /* SIO*/ -#define P80_SIO (0x060) /* *sio.asm*/ +#define P80_SIO (0x060) /* Memory Setp*/ -#define P80_MEM_SETUP (0x070) /* docboot meminit*/ -#define POST_MEM_SETUP (0x070) /* memsize.asm*/ -#define ERROR_32BIT_DIMMS (0x071) /* memsize.asm*/ -#define POST_MEM_SETUP2 (0x072) /* memsize.asm*/ -#define POST_MEM_SETUP3 (0x073) /* memsize.asm*/ -#define POST_MEM_SETUP4 (0x074) /* memsize.asm*/ -#define POST_MEM_SETUP5 (0x075) /* memsize.asm*/ -#define POST_MEM_ENABLE (0x076) /* memsize.asm*/ -#define ERROR_NO_DIMMS (0x077) /* memsize.asm*/ -#define ERROR_DIFF_DIMMS (0x078) /* memsize.asm*/ -#define ERROR_BAD_LATENCY (0x079) /* memsize.asm*/ -#define ERROR_SET_PAGE (0x07a) /* memsize.asm*/ -#define ERROR_DENSITY_DIMM (0x07b) /* memsize.asm*/ -#define ERROR_UNSUPPORTED_DIMM (0x07c) /* memsize.asm*/ -#define ERROR_BANK_SET (0x07d) /* memsize.asm*/ -#define POST_MEM_SETUP_GOOD (0x07E) /* memsize.asm*/ -#define POST_MEM_SETUP_FAIL (0x07F) /* memsize.asm*/ - - -#define POST_UserPreInit (0x080) /* geode.asm*/ -#define POST_UserPostInit (0x081) /* geode.asm*/ -#define POST_Equipment_check (0x082) /* geode.asm*/ -#define POST_InitNVRAMBX (0x083) /* geode.asm*/ -#define POST_NoPIRTable (0x084) /* pci.asm*/ -#define POST_ChipsetFingerPrintPass (0x085) /* prechipsetinit*/ -#define POST_ChipsetFingerPrintFail (0x086) /* prechipsetinit*/ -#define POST_CPU_IM_TAG_BIST_FAILURE (0x087) /* gx2reg.asm*/ -#define POST_CPU_IM_DATA_BIST_FAILURE (0x088) /* gx2reg.asm*/ -#define POST_CPU_FPU_BIST_FAILURE (0x089) /* gx2reg.asm*/ -#define POST_CPU_BTB_BIST_FAILURE (0x08a) /* gx2reg.asm*/ -#define POST_CPU_EX_BIST_FAILURE (0x08b) /* gx2reg.asm*/ -#define POST_Chipset_PI_Test_Fail (0x08c) /* prechipsetinit*/ -#define POST_Chipset_SMBus_SDA_Test_Fail (0x08d) /* prechipsetinit*/ -#define POST_BIT_CLK_Fail (0x08e) /* Hawk geode.asm override*/ - - -#define POST_STACK_SETUP (0x090) /* memstack.asm*/ -#define POST_CPU_PF_BIST_FAILURE (0x091) /* gx2reg.asm*/ -#define POST_CPU_L2_BIST_FAILURE (0x092) /* gx2reg.asm*/ -#define POST_CPU_GLCP_BIST_FAILURE (0x093) /* gx2reg.asm*/ -#define POST_CPU_DF_BIST_FAILURE (0x094) /* gx2reg.asm*/ -#define POST_CPU_VG_BIST_FAILURE (0x095) /* gx2reg.asm*/ -#define POST_CPU_VIP_BIST_FAILURE (0x096) /* gx2reg.asm*/ -#define POST_STACK_SETUP_PASS (0x09E) /* memstack.asm*/ -#define POST_STACK_SETUP_FAIL (0x09F) /* memstack.asm*/ - - -#define POST_PLL_INIT (0x0A0) /* pllinit.asm*/ -#define POST_PLL_MANUAL (0x0A1) /* pllinit.asm*/ -#define POST_PLL_STRAP (0x0A2) /* pllinit.asm*/ -#define POST_PLL_RESET_FAIL (0x0A3) /* pllinit.asm*/ -#define POST_PLL_PCI_FAIL (0x0A4) /* pllinit.asm*/ -#define POST_PLL_MEM_FAIL (0x0A5) /* pllinit.asm*/ -#define POST_PLL_CPU_VER_FAIL (0x0A6) /* pllinit.asm*/ - - -#define POST_MEM_TESTMEM (0x0B0) /* memtest.asm*/ -#define POST_MEM_TESTMEM1 (0x0B1) /* memtest.asm*/ -#define POST_MEM_TESTMEM2 (0x0B2) /* memtest.asm*/ -#define POST_MEM_TESTMEM3 (0x0B3) /* memtest.asm*/ -#define POST_MEM_TESTMEM4 (0x0B4) /* memtest.asm*/ -#define POST_MEM_TESTMEM_PASS (0x0BE) /* memtest.asm*/ -#define POST_MEM_TESTMEM_FAIL (0x0BF) /* memtest.asm*/ - - -#define POST_SECUROM_SECBOOT_START (0x0C0) /* secstart.asm*/ -#define POST_SECUROM_BOOTSRCSETUP (0x0C1) /* secstart.asm*/ -#define POST_SECUROM_REMAP_FAIL (0x0C2) /* secstart.asm*/ -#define POST_SECUROM_BOOTSRCSETUP_FAIL (0x0C3) /* secstart.asm*/ -#define POST_SECUROM_DCACHESETUP (0x0C4) /* secstart.asm*/ -#define POST_SECUROM_DCACHESETUP_FAIL (0x0C5) /* secstart.asm*/ -#define POST_SECUROM_ICACHESETUP (0x0C6) /* secstart.asm*/ -#define POST_SECUROM_DESCRIPTORSETUP (0x0C7) /* secstart.asm*/ -#define POST_SECUROM_DCACHESETUPBIOS (0x0C8) /* secstart.asm*/ -#define POST_SECUROM_PLATFORMSETUP (0x0C9) /* secstart.asm*/ -#define POST_SECUROM_SIGCHECKBIOS (0x0CA) /* secstart.asm*/ -#define POST_SECUROM_ICACHESETUPBIOS (0x0CB) /* secstart.asm*/ -#define POST_SECUROM_PASS (0x0CC) /* secstart.asm*/ -#define POST_SECUROM_FAIL (0x0CD) /* secstart.asm*/ - -#define POST_RCONFInitError (0x0CE) /* cache.asm*/ -#define POST_CacheInitError (0x0CF) /* cache.asm*/ - - -#define POST_ROM_PREUNCOMPRESS (0x0D0) /* rominit.asm*/ -#define POST_ROM_UNCOMPRESS (0x0D1) /* rominit.asm*/ -#define POST_ROM_SMM_INIT (0x0D2) /* rominit.asm*/ -#define POST_ROM_VID_BIOS (0x0D3) /* rominit.asm*/ -#define POST_ROM_LCDINIT (0x0D4) /* rominit.asm*/ -#define POST_ROM_SPLASH (0x0D5) /* rominit.asm*/ -#define POST_ROM_HDDINIT (0x0D6) /* rominit.asm*/ -#define POST_ROM_SYS_INIT (0x0D7) /* rominit.asm*/ -#define POST_ROM_DMM_INIT (0x0D8) /* rominit.asm*/ -#define POST_ROM_TVINIT (0x0D9) /* rominit.asm*/ +#define P80_MEM_SETUP (0x070) +#define POST_MEM_SETUP (0x070) +#define ERROR_32BIT_DIMMS (0x071) +#define POST_MEM_SETUP2 (0x072) +#define POST_MEM_SETUP3 (0x073) +#define POST_MEM_SETUP4 (0x074) +#define POST_MEM_SETUP5 (0x075) +#define POST_MEM_ENABLE (0x076) +#define ERROR_NO_DIMMS (0x077) +#define ERROR_DIFF_DIMMS (0x078) +#define ERROR_BAD_LATENCY (0x079) +#define ERROR_SET_PAGE (0x07a) +#define ERROR_DENSITY_DIMM (0x07b) +#define ERROR_UNSUPPORTED_DIMM (0x07c) +#define ERROR_BANK_SET (0x07d) +#define POST_MEM_SETUP_GOOD (0x07E) +#define POST_MEM_SETUP_FAIL (0x07F) + + +#define POST_UserPreInit (0x080) +#define POST_UserPostInit (0x081) +#define POST_Equipment_check (0x082) +#define POST_InitNVRAMBX (0x083) +#define POST_NoPIRTable (0x084) +#define POST_ChipsetFingerPrintPass (0x085) +#define POST_ChipsetFingerPrintFail (0x086) +#define POST_CPU_IM_TAG_BIST_FAILURE (0x087) +#define POST_CPU_IM_DATA_BIST_FAILURE (0x088) +#define POST_CPU_FPU_BIST_FAILURE (0x089) +#define POST_CPU_BTB_BIST_FAILURE (0x08a) +#define POST_CPU_EX_BIST_FAILURE (0x08b) +#define POST_Chipset_PI_Test_Fail (0x08c) +#define POST_Chipset_SMBus_SDA_Test_Fail (0x08d) +#define POST_BIT_CLK_Fail (0x08e) + + +#define POST_STACK_SETUP (0x090) +#define POST_CPU_PF_BIST_FAILURE (0x091) +#define POST_CPU_L2_BIST_FAILURE (0x092) +#define POST_CPU_GLCP_BIST_FAILURE (0x093) +#define POST_CPU_DF_BIST_FAILURE (0x094) +#define POST_CPU_VG_BIST_FAILURE (0x095) +#define POST_CPU_VIP_BIST_FAILURE (0x096) +#define POST_STACK_SETUP_PASS (0x09E) +#define POST_STACK_SETUP_FAIL (0x09F) + + +#define POST_PLL_INIT (0x0A0) +#define POST_PLL_MANUAL (0x0A1) +#define POST_PLL_STRAP (0x0A2) +#define POST_PLL_RESET_FAIL (0x0A3) +#define POST_PLL_PCI_FAIL (0x0A4) +#define POST_PLL_MEM_FAIL (0x0A5) +#define POST_PLL_CPU_VER_FAIL (0x0A6) + + +#define POST_MEM_TESTMEM (0x0B0) +#define POST_MEM_TESTMEM1 (0x0B1) +#define POST_MEM_TESTMEM2 (0x0B2) +#define POST_MEM_TESTMEM3 (0x0B3) +#define POST_MEM_TESTMEM4 (0x0B4) +#define POST_MEM_TESTMEM_PASS (0x0BE) +#define POST_MEM_TESTMEM_FAIL (0x0BF) + + +#define POST_SECUROM_SECBOOT_START (0x0C0) +#define POST_SECUROM_BOOTSRCSETUP (0x0C1) +#define POST_SECUROM_REMAP_FAIL (0x0C2) +#define POST_SECUROM_BOOTSRCSETUP_FAIL (0x0C3) +#define POST_SECUROM_DCACHESETUP (0x0C4) +#define POST_SECUROM_DCACHESETUP_FAIL (0x0C5) +#define POST_SECUROM_ICACHESETUP (0x0C6) +#define POST_SECUROM_DESCRIPTORSETUP (0x0C7) +#define POST_SECUROM_DCACHESETUPBIOS (0x0C8) +#define POST_SECUROM_PLATFORMSETUP (0x0C9) +#define POST_SECUROM_SIGCHECKBIOS (0x0CA) +#define POST_SECUROM_ICACHESETUPBIOS (0x0CB) +#define POST_SECUROM_PASS (0x0CC) +#define POST_SECUROM_FAIL (0x0CD) + +#define POST_RCONFInitError (0x0CE) +#define POST_CacheInitError (0x0CF) + + +#define POST_ROM_PREUNCOMPRESS (0x0D0) +#define POST_ROM_UNCOMPRESS (0x0D1) +#define POST_ROM_SMM_INIT (0x0D2) +#define POST_ROM_VID_BIOS (0x0D3) +#define POST_ROM_LCDINIT (0x0D4) +#define POST_ROM_SPLASH (0x0D5) +#define POST_ROM_HDDINIT (0x0D6) +#define POST_ROM_SYS_INIT (0x0D7) +#define POST_ROM_DMM_INIT (0x0D8) +#define POST_ROM_TVINIT (0x0D9) #define POST_ROM_POSTUNCOMPRESS (0x0DE) -#define P80_CHIPSET_INIT (0x0E0) /* chipset.asm*/ -#define POST_PreChipsetInit (0x0E1) /* geode.asm*/ -#define POST_LateChipsetInit (0x0E2) /* geode.asm*/ -#define POST_NORTHB_INIT (0x0E8) /* northb.asm*/ +#define P80_CHIPSET_INIT (0x0E0) +#define POST_PreChipsetInit (0x0E1) +#define POST_LateChipsetInit (0x0E2) +#define POST_NORTHB_INIT (0x0E8) -#define POST_INTR_SEG_JUMP (0x0F0) /* vector.asm*/ +#define POST_INTR_SEG_JUMP (0x0F0) diff --git a/src/include/cpu/amd/vr.h b/src/include/cpu/amd/vr.h index 286eaa94c5..e98ac86409 100644 --- a/src/include/cpu/amd/vr.h +++ b/src/include/cpu/amd/vr.h @@ -476,8 +476,6 @@ /* * Write to a Virtual Register - * AX = Class/Index - * CX = data to write */ static inline void vrWrite(uint16_t wClassIndex, uint16_t wData) { @@ -487,7 +485,6 @@ static inline void vrWrite(uint16_t wClassIndex, uint16_t wData) /* * Read from a Virtual Register - * AX = Class/Index * Returns a 16-bit word of data */ static inline uint16_t vrRead(uint16_t wClassIndex) diff --git a/src/northbridge/amd/lx/northbridge.c b/src/northbridge/amd/lx/northbridge.c index 7f419e739e..4ad67006bb 100644 --- a/src/northbridge/amd/lx/northbridge.c +++ b/src/northbridge/amd/lx/northbridge.c @@ -127,6 +127,7 @@ int sizeram(void) int sizem = 0; unsigned short dimm; + /* Get the RAM size from the memory controller as calculated and set by auto_size_dimm() */ msr = rdmsr(MC_CF07_DATA); printk_debug("sizeram: _MSR MC_CF07_DATA: %08x:%08x\n", msr.hi, msr.lo); @@ -134,14 +135,14 @@ int sizeram(void) dimm = msr.hi; /* installed? */ if ((dimm & 7) != 7) { - sizem = 4 << ((dimm >> 12) & 0x0F); + sizem = 4 << ((dimm >> 12) & 0x0F); /* 1:8MB, 2:16MB, 3:32MB, 4:64MB, ... 7:512MB, 8:1GB */ } /* dimm 1 */ dimm = msr.hi >> 16; /* installed? */ if ((dimm & 7) != 7) { - sizem += 4 << ((dimm >> 12) & 0x0F); + sizem += 4 << ((dimm >> 12) & 0x0F); /* 1:8MB, 2:16MB, 3:32MB, 4:64MB, ... 7:512MB, 8:1GB */ } printk_debug("sizeram: sizem 0x%xMB\n", sizem); diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c index afbec24a39..653323619b 100644 --- a/src/southbridge/amd/cs5536/cs5536.c +++ b/src/southbridge/amd/cs5536/cs5536.c @@ -131,14 +131,12 @@ static void pmChipsetInit(void) /* PM_SED */ port = (PMS_IO_BASE + 0x014); -/* mov eax, 0x057642 ; 100ms, works*/ - val = 0x04601; /* 5ms */ + val = 0x04601; /* 5ms, # of 3.57954MHz clock edges */ outl(val, port); /* PM_SIDD */ port = (PMS_IO_BASE + 0x020); -/* mov eax, 0x0AEC84 ; 200ms, works*/ - val = 0x08C02; /* 10ms */ + val = 0x08C02; /* 10ms, # of 3.57954MHz clock edges */ outl(val, port); } diff --git a/src/southbridge/amd/cs5536/cs5536_early_setup.c b/src/southbridge/amd/cs5536/cs5536_early_setup.c index d534bead90..d6ba089402 100644 --- a/src/southbridge/amd/cs5536/cs5536_early_setup.c +++ b/src/southbridge/amd/cs5536/cs5536_early_setup.c @@ -97,10 +97,10 @@ static void cs5536_setup_power_button(void) /* Power Button Setup */ outl(0x40020000, PMS_IO_BASE + 0x40); - /* setup GPIO24, it is the external signal for 5536 vsb_work_aux - * which controls all voltage rails except Vstandby & Vmem. + /* setup WORK_AUX/GPIO24, it is the external signal for 5536 + * vsb_work_aux controls all voltage rails except Vstandby & Vmem. * We need to enable, OUT_AUX1 and OUTPUT_ENABLE in this order. - * If GPIO24 is not enabled then soft-off will not work. + * If WORK_AUX/GPIO24 is not enabled then soft-off will not work. */ outl(GPIOH_24_SET, GPIO_IO_BASE + GPIOH_OUT_AUX1_SELECT); outl(GPIOH_24_SET, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); @@ -127,7 +127,7 @@ static void cs5536_disable_internal_uart(void) { msr_t msr; /* The UARTs default to enabled. - * Disable and reset them and configure them later. (SIO init) + * Disable and reset them and configure them later. (SIO init) */ msr = rdmsr(MDD_UART1_CONF); msr.lo = 1; // reset |