diff options
23 files changed, 262 insertions, 1617 deletions
diff --git a/src/arch/i386/lib/failover_failover.lds b/src/arch/i386/lib/failover_failover.lds deleted file mode 100644 index 19e6edfaaa..0000000000 --- a/src/arch/i386/lib/failover_failover.lds +++ /dev/null @@ -1,2 +0,0 @@ - __fallback_image = (CONFIG_ROMBASE & 0xfffffff0) - 8; - __normal_image = ((CONFIG_ROMBASE - CONFIG_FALLBACK_SIZE) & 0xfffffff0) - 8; diff --git a/src/mainboard/amd/mahogany_fam10/romstage.c b/src/mainboard/amd/mahogany_fam10/romstage.c index eb01aa3375..5846a79301 100644 --- a/src/mainboard/amd/mahogany_fam10/romstage.c +++ b/src/mainboard/amd/mahogany_fam10/romstage.c @@ -131,80 +131,9 @@ static int spd_read_byte(u32 device, u32 address) #endif /* (CONFIG_USE_FAILOVER_IMAGE == 0) */ -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "northbridge/amd/amdfam10/early_ht.c" #include "southbridge/amd/sb700/sb700_early_setup.c" -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - int last_boot_normal_flag = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_flag) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sb700_pci_port80(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_flag) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - -fallback_image: - #if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) - #endif - ; -} -#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) */ - - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a CONFIG_USE_FAILOVER_IMAGE=0. -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if (CONFIG_USE_FAILOVER_IMAGE==0) //#include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" @@ -218,7 +147,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #define DIMM2 0x52 #define DIMM3 0x53 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); @@ -227,6 +156,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) u32 val; msr_t msr; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sb700_pci_port80(); + } + post_code(0x30); if (bist == 0) { diff --git a/src/mainboard/amd/serengeti_cheetah/romstage.c b/src/mainboard/amd/serengeti_cheetah/romstage.c index 2626f8012a..8c6ea9b72a 100644 --- a/src/mainboard/amd/serengeti_cheetah/romstage.c +++ b/src/mainboard/amd/serengeti_cheetah/romstage.c @@ -154,82 +154,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/fidvid.c" #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -259,6 +189,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) struct cpuid_result cpuid1; #endif + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c index 0546a6ddf3..5867fd3506 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c @@ -144,88 +144,15 @@ static int spd_read_byte(u32 device, u32 address) #endif /* (CONFIG_USE_FAILOVER_IMAGE == 0) */ -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c" -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - int last_boot_normal_flag = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_flag) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_flag) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - -fallback_image: - #if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) - #endif - ; -} -#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) */ - - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a CONFIG_USE_FAILOVER_IMAGE=0. -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - - #if (CONFIG_USE_FAILOVER_IMAGE==0) #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c" -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); @@ -233,6 +160,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) u32 val; msr_t msr; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + post_code(0x30); if (bist == 0) { diff --git a/src/mainboard/asus/a8n_e/romstage.c b/src/mainboard/asus/a8n_e/romstage.c index ae70c847f3..1c6d6488a2 100644 --- a/src/mainboard/asus/a8n_e/romstage.c +++ b/src/mainboard/asus/a8n_e/romstage.c @@ -98,9 +98,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif /* CONFIG_USE_FAILOVER_IMAGE */ -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) \ - || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -121,79 +118,8 @@ static void sio_setup(void) pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the BIOS? */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - - /* This is the primary CPU. How should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - -fallback_image: - -#if CONFIG_HAVE_FAILOVER_BOOT == 1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} - -#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) ... */ - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT == 1 -#if CONFIG_USE_FAILOVER_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#else - real_main(bist, cpu_init_detectedx); -#endif -#else -#if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE == 0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, @@ -208,6 +134,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) unsigned nodes, bsp_apicid = 0; struct mem_controller ctrl[8]; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + } + if (bist == 0) bsp_apicid = init_cpus(cpu_init_detectedx); diff --git a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c index 69e06bc2e5..49800a5a0a 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c +++ b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c @@ -152,9 +152,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - -#include "southbridge/sis/sis966/sis966_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -178,77 +175,9 @@ static void sio_setup(void) pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4, dword); } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the sis966 */ - sis966_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -264,6 +193,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset = 0; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the sis966 */ + sis966_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/gigabyte/m57sli/romstage.c b/src/mainboard/gigabyte/m57sli/romstage.c index ecc7827428..494ce5a1bb 100644 --- a/src/mainboard/gigabyte/m57sli/romstage.c +++ b/src/mainboard/gigabyte/m57sli/romstage.c @@ -150,8 +150,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -176,77 +174,10 @@ static void sio_setup(void) pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -263,6 +194,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) unsigned bsp_apicid = 0; uint8_t tmp = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/hp/dl145_g3/romstage.c b/src/mainboard/hp/dl145_g3/romstage.c index 525cb3e102..c2b225f697 100644 --- a/src/mainboard/hp/dl145_g3/romstage.c +++ b/src/mainboard/hp/dl145_g3/romstage.c @@ -155,8 +155,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "northbridge/amd/amdk8/early_ht.c" #if 0 @@ -197,78 +195,9 @@ static void setup_early_ipmi_serial() } #endif - -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - /* Is this a cpu only reset? Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal()) { // RTC already inited - goto normal_image; //normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - bcm5785_enable_rom(); - bcm5785_enable_lpc(); - //enable RTC - pc87417_enable_dev(RTC_DEV); - - /* Is this a deliberate reset by the bios */ - - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; - -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -287,6 +216,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + bcm5785_enable_rom(); + bcm5785_enable_lpc(); + //enable RTC + pc87417_enable_dev(RTC_DEV); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); diff --git a/src/mainboard/iwill/dk8_htx/romstage.c b/src/mainboard/iwill/dk8_htx/romstage.c index cdfdfc09c5..c3ab4ddae0 100644 --- a/src/mainboard/iwill/dk8_htx/romstage.c +++ b/src/mainboard/iwill/dk8_htx/romstage.c @@ -130,82 +130,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/fidvid.c" #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -224,6 +154,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset; int i; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/iwill/dk8s2/romstage.c b/src/mainboard/iwill/dk8s2/romstage.c index 271ad6cc54..04575b13b3 100644 --- a/src/mainboard/iwill/dk8s2/romstage.c +++ b/src/mainboard/iwill/dk8s2/romstage.c @@ -130,82 +130,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/fidvid.c" #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -224,6 +154,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset; int i; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/iwill/dk8x/romstage.c b/src/mainboard/iwill/dk8x/romstage.c index 271ad6cc54..04575b13b3 100644 --- a/src/mainboard/iwill/dk8x/romstage.c +++ b/src/mainboard/iwill/dk8x/romstage.c @@ -130,82 +130,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/fidvid.c" #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -224,6 +154,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset; int i; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/msi/ms7135/romstage.c b/src/mainboard/msi/ms7135/romstage.c index 9477c6e514..6fc010ddf1 100644 --- a/src/mainboard/msi/ms7135/romstage.c +++ b/src/mainboard/msi/ms7135/romstage.c @@ -100,9 +100,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif /* CONFIG_USE_FAILOVER_IMAGE */ -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) \ - || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -124,79 +121,8 @@ static void sio_setup(void) pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the BIOS? */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - - /* This is the primary CPU. How should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - -fallback_image: - -#if CONFIG_HAVE_FAILOVER_BOOT == 1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} - -#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) ... */ - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT == 1 -#if CONFIG_USE_FAILOVER_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#else - real_main(bist, cpu_init_detectedx); -#endif -#else -#if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE == 0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { (0xa << 3) | 0, (0xa << 3) | 1, 0, 0, @@ -211,6 +137,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) struct mem_controller ctrl[8]; unsigned nodes; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx); } diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c index a8697b5114..ee63d149ba 100644 --- a/src/mainboard/msi/ms7260/romstage.c +++ b/src/mainboard/msi/ms7260/romstage.c @@ -131,8 +131,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -154,74 +152,9 @@ static void sio_setup(void) pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned int last_boot_normal_x = last_boot_normal(); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) - goto normal_image; - else - goto fallback_image; - } - - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the MCP55. */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the BIOS? */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary CPU. How should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image": - :"a" (bist), "b"(cpu_init_detectedx) - ); - -fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image": - :"a" (bist), "b"(cpu_init_detectedx) - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT == 1 -#if CONFIG_USE_FAILOVER_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#else - real_main(bist, cpu_init_detectedx); -#endif -#else -#if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE == 0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, @@ -237,6 +170,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset = 0; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the MCP55. */ + mcp55_enable_rom(); + } + if (bist == 0) bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c index 60a1e14f1d..16925256d5 100644 --- a/src/mainboard/msi/ms9652_fam10/romstage.c +++ b/src/mainboard/msi/ms9652_fam10/romstage.c @@ -145,8 +145,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c" @@ -165,81 +163,12 @@ static void sio_setup(void) pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c" -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); @@ -249,6 +178,19 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) u32 wants_reset; msr_t msr; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + post_code(0x30); if (bist == 0) { diff --git a/src/mainboard/nvidia/l1_2pvv/romstage.c b/src/mainboard/nvidia/l1_2pvv/romstage.c index ab6941f22d..517ad55a4e 100644 --- a/src/mainboard/nvidia/l1_2pvv/romstage.c +++ b/src/mainboard/nvidia/l1_2pvv/romstage.c @@ -150,8 +150,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -177,77 +175,8 @@ static void sio_setup(void) } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -263,6 +192,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset = 0; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c index 72d5809ea4..6b42690c3b 100644 --- a/src/mainboard/supermicro/h8dme/romstage.c +++ b/src/mainboard/supermicro/h8dme/romstage.c @@ -193,8 +193,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -223,78 +221,13 @@ static void sio_setup(void) } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } else { - goto fallback_image; - } -normal_image: - __asm__ volatile ("jmp __normal_image": /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image": /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 -#if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); -#else - real_main(bist, cpu_init_detectedx); -#endif -#else -#if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#endif - real_main(bist, cpu_init_detectedx); -#endif -} - /* We have no idea where the SMBUS switch is. This doesn't do anything ATM. */ #define RC0 (2<<8) #define RC1 (1<<8) #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { /* The SPD is being read from the CPU1 (marked CPU2 on the board) and we don't know how to switch the SMBus to decode the CPU0 SPDs. So, The @@ -319,6 +252,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset = 0; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/supermicro/h8dmr/romstage.c b/src/mainboard/supermicro/h8dmr/romstage.c index 9c675274af..34c413f2f0 100644 --- a/src/mainboard/supermicro/h8dmr/romstage.c +++ b/src/mainboard/supermicro/h8dmr/romstage.c @@ -139,8 +139,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -169,77 +167,9 @@ static void sio_setup(void) } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -255,6 +185,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset = 0; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c index 9d870f0c8d..0aa934b3ca 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c +++ b/src/mainboard/supermicro/h8dmr_fam10/romstage.c @@ -135,8 +135,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c" @@ -165,81 +163,12 @@ static void sio_setup(void) } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c" -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); @@ -248,6 +177,19 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) u32 wants_reset; msr_t msr; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + post_code(0x30); if (bist == 0) { diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c index e89dafdc42..9b5809dc49 100644 --- a/src/mainboard/supermicro/h8qme_fam10/romstage.c +++ b/src/mainboard/supermicro/h8qme_fam10/romstage.c @@ -138,8 +138,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c" @@ -168,75 +166,6 @@ static void sio_setup(void) } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" @@ -282,7 +211,7 @@ void write_GPIO(void) pnp_exit_ext_func_mode(GPIO3_DEV); } -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); @@ -291,6 +220,19 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) u32 wants_reset; msr_t msr; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + post_code(0x30); if (bist == 0) { diff --git a/src/mainboard/tyan/s2895/failover.c b/src/mainboard/tyan/s2895/failover.c deleted file mode 100644 index 25f488dac4..0000000000 --- a/src/mainboard/tyan/s2895/failover.c +++ /dev/null @@ -1,108 +0,0 @@ -#define ASSEMBLY 1 -#define __PRE_RAM__ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include "option_table.h" -#include "pc80/mc146818rtc_early.c" - -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdk8/reset_test.c" - -#include "southbridge/nvidia/ck804/ck804_enable_rom.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define post_code(x) outb(x, 0x80) - -#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" -#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" -#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) -#define SUPERIO_GPIO_IO_BASE 0x400 - -static void sio_setup(void) -{ - - unsigned value; - uint32_t dword; - uint8_t byte; - - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); - - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<29)|(1<<0); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); - - lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); - value &= 0xbf; - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); - -} - -void mainboard_bsp_init() -{ - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - mainboard_bsp_init(); - - /* Is this a deliberate reset by the bios */ - post_code(0x22); - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - post_code(0x23); - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - - fallback_image: - post_code(0x25); - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); -} diff --git a/src/mainboard/tyan/s2895/romstage.c b/src/mainboard/tyan/s2895/romstage.c index 78ddd1c6a3..1f388728f5 100644 --- a/src/mainboard/tyan/s2895/romstage.c +++ b/src/mainboard/tyan/s2895/romstage.c @@ -116,8 +116,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -149,81 +147,9 @@ static void sio_setup(void) } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the bios */ -// post_code(0x22); - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: -// post_code(0x23); - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -// post_code(0x25); -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -240,6 +166,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) struct mem_controller ctrl[8]; unsigned nodes; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx); } diff --git a/src/mainboard/tyan/s2912/romstage.c b/src/mainboard/tyan/s2912/romstage.c index ce466306ce..7ac2576ba1 100644 --- a/src/mainboard/tyan/s2912/romstage.c +++ b/src/mainboard/tyan/s2912/romstage.c @@ -148,8 +148,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -176,77 +174,9 @@ static void sio_setup(void) } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -262,6 +192,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset = 0; unsigned bsp_apicid = 0; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c index 337750b66e..76f339e70a 100644 --- a/src/mainboard/tyan/s2912_fam10/romstage.c +++ b/src/mainboard/tyan/s2912_fam10/romstage.c @@ -144,8 +144,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c" @@ -170,81 +168,12 @@ static void sio_setup(void) } -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c" -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); @@ -253,6 +182,19 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) u32 wants_reset; msr_t msr; + if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + post_code(0x30); if (bist == 0) { |