diff options
| -rw-r--r-- | src/southbridge/intel/lynxpoint/azalia.c | 2 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/chip.h | 5 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/lpc.c | 75 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/pcie.c | 12 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/sata.c | 81 |
5 files changed, 120 insertions, 55 deletions
diff --git a/src/southbridge/intel/lynxpoint/azalia.c b/src/southbridge/intel/lynxpoint/azalia.c index 7b51671d7e..ac2b79d15f 100644 --- a/src/southbridge/intel/lynxpoint/azalia.c +++ b/src/southbridge/intel/lynxpoint/azalia.c @@ -282,7 +282,7 @@ static void azalia_init(struct device *dev) pci_write_config32(dev, 0xc4, reg32); reg8 = pci_read_config8(dev, 0x43); - reg8 |= (1 << 6); + reg8 |= (1 << 5) | (1 << 6) | (1 << 2) | (1 << 1) | (1 << 0); pci_write_config8(dev, 0x43, reg8); /* Additional programming steps */ diff --git a/src/southbridge/intel/lynxpoint/chip.h b/src/southbridge/intel/lynxpoint/chip.h index 1e6195bb62..ffeb977534 100644 --- a/src/southbridge/intel/lynxpoint/chip.h +++ b/src/southbridge/intel/lynxpoint/chip.h @@ -69,6 +69,11 @@ struct southbridge_intel_lynxpoint_config { uint8_t sata_port_map; uint32_t sata_port0_gen3_tx; uint32_t sata_port1_gen3_tx; + /* SATA DEVSLP Mux + * 0 = port 0 DEVSLP on DEVSLP0/GPIO33 + * 1 = port 3 DEVSLP on DEVSLP0/GPIO33 + */ + uint8_t sata_devslp_mux; uint32_t gen1_dec; uint32_t gen2_dec; diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index 378d62477b..a44d80f802 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -365,38 +365,67 @@ static void enable_hpet(void) static void enable_clock_gating(device_t dev) { +#if CONFIG_INTEL_LYNXPOINT_LP + /* LynxPoint LP */ u32 reg32; u16 reg16; + /* DMI */ RCBA32_AND_OR(0x2234, ~0UL, 0xf); - reg16 = pci_read_config16(dev, GEN_PMCON_1); - reg16 |= (1 << 2) | (1 << 11); + reg16 &= ~((1 << 11) | (1 << 14)); + reg16 |= (1 << 5) | (1 << 6) | (1 << 7) | (1 << 12) | (1 << 13); + reg16 |= (1 << 2); // PCI CLKRUN# Enable pci_write_config16(dev, GEN_PMCON_1, reg16); - pch_iobp_update(0xEB007F07, ~0UL, (1 << 31)); - pch_iobp_update(0xEB004000, ~0UL, (1 << 7)); - pch_iobp_update(0xEC007F07, ~0UL, (1 << 31)); - pch_iobp_update(0xEC004000, ~0UL, (1 << 7)); + reg32 = pci_read_config32(dev, 0x64); + reg32 |= (1 << 6); + pci_write_config32(dev, 0x64, reg32); + + RCBA32_AND_OR(0x2614, 0x8fffffff, 0x0f006500); + RCBA32_OR(0x900, 0x0000031f); reg32 = RCBA32(CG); - reg32 |= (1 << 31); - reg32 |= (1 << 29) | (1 << 28); - reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24); - reg32 |= (1 << 16); - reg32 |= (1 << 17); - reg32 |= (1 << 18); - reg32 |= (1 << 22); - reg32 |= (1 << 23); - reg32 &= ~(1 << 20); - reg32 |= (1 << 19); - reg32 |= (1 << 0); - reg32 |= (0xf << 1); + reg32 |= (1 << 31); // LPC Dynamic + reg32 |= (1 << 30); // LP LPC + reg32 |= (1 << 28); // GPIO Dynamic + reg32 |= (1 << 27); // HPET Dynamic + reg32 |= (1 << 26); // LP LPC + reg32 |= (1 << 22); // HDA Dynamic + reg32 |= (1 << 16); // PCIe Dynamic RCBA32(CG) = reg32; - RCBA32_OR(0x38c0, 0x7); - RCBA32_OR(0x36d4, 0x6680c004); - RCBA32_OR(0x3564, 0x3); + RCBA32_OR(0x3434, 0x7); // LP LPC + + RCBA32_AND_OR(0x333c, 0xff0fffff, 0x00800000); // SATA + + RCBA32_OR(0x38c0, 0x3c07); // SPI Dynamic + + pch_iobp_update(0xCF000000, ~0UL, 0x00007001); + pch_iobp_update(0xCE00C000, ~0UL, 0x00000001); +#else + /* LynxPoint Mobile */ + u32 reg32; + u16 reg16; + + /* DMI */ + RCBA32_AND_OR(0x2234, ~0UL, 0xf); + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 |= (1 << 11) | (1 << 12) | (1 << 14); + reg16 |= (1 << 2); // PCI CLKRUN# Enable + pci_write_config16(dev, GEN_PMCON_1, reg16); + RCBA32_OR(0x900, (1 << 14)); + + reg32 = RCBA32(CG); + reg32 |= (1 << 22); // HDA Dynamic + reg32 |= (1 << 31); // LPC Dynamic + reg32 |= (1 << 16); // PCIe Dynamic + reg32 |= (1 << 27); // HPET Dynamic + reg32 |= (1 << 28); // GPIO Dynamic + RCBA32(CG) = reg32; + + RCBA32_OR(0x38c0, 0x7); // SPI Dynamic +#endif } #if CONFIG_HAVE_SMI_HANDLER @@ -666,6 +695,10 @@ static const unsigned short pci_device_ids[] = { 0x8c4c, /* Q85 SKU */ 0x8c4e, /* Q87 SKU */ 0x8c4f, /* QM87 SKU */ + 0x9c41, /* LP Full Featured Engineering Sample */ + 0x9c43, /* LP Premium SKU */ + 0x9c45, /* LP Mainstream SKU */ + 0x9c47, /* LP Value SKU */ 0 }; static const struct pci_driver pch_lpc __pci_driver = { diff --git a/src/southbridge/intel/lynxpoint/pcie.c b/src/southbridge/intel/lynxpoint/pcie.c index 80cd3550e1..9463d0cb00 100644 --- a/src/southbridge/intel/lynxpoint/pcie.c +++ b/src/southbridge/intel/lynxpoint/pcie.c @@ -260,11 +260,13 @@ static struct device_operations device_ops = { .ops_pci = &pci_ops, }; -static const unsigned short pci_device_ids[] = { 0x1c10, 0x1c12, 0x1c14, 0x1c16, - 0x1c18, 0x1c1a, 0x1c1c, 0x1c1e, - 0x1e10, 0x1e12, 0x1e14, 0x1e16, - 0x1e18, 0x1e1a, 0x1e1c, 0x1e1e, - 0 }; +static const unsigned short pci_device_ids[] = { + /* Lynxpoint Mobile */ + 0x8c10, 0x8c12, 0x8c14, 0x8c16, 0x8c18, 0x8c1a, 0x8c1c, 0x8c1e, + /* Lynxpoint Low Power */ + 0x9c10, 0x9c12, 0x9c14, 0x9c16, 0x9c18, 0x9c1a, + 0 +}; static const struct pci_driver pch_pcie __pci_driver = { .ops = &device_ops, diff --git a/src/southbridge/intel/lynxpoint/sata.c b/src/southbridge/intel/lynxpoint/sata.c index 0761323179..81d4a1d996 100644 --- a/src/southbridge/intel/lynxpoint/sata.c +++ b/src/southbridge/intel/lynxpoint/sata.c @@ -120,13 +120,37 @@ static void sata_init(struct device *dev) /* for AHCI, Port Enable is managed in memory mapped space */ reg16 = pci_read_config16(dev, 0x92); - reg16 &= ~0x3f; /* 6 ports SKU + ORM */ + reg16 &= ~0x3f; reg16 |= 0x8000 | config->sata_port_map; pci_write_config16(dev, 0x92, reg16); + /* Setup register 98h */ + reg32 = pci_read_config16(dev, 0x98); + reg32 |= 1 << 19; /* BWG step 6 */ + reg32 |= 1 << 22; /* BWG step 5 */ + reg32 &= ~(0x3f << 7); + reg32 |= 0x04 << 7; /* BWG step 7 */ + reg32 |= 1 << 20; /* BWG step 8 */ + reg32 &= ~(0x03 << 5); + reg32 |= 1 << 5; /* BWG step 9 */ + reg32 |= 1 << 18; /* BWG step 10 */ + reg32 |= 1 << 29; /* BWG step 11 */ +#if CONFIG_INTEL_LYNXPOINT_LP + reg32 &= ~((1 << 31) | (1 << 30)); + reg32 |= 1 << 23; +#endif + pci_write_config32(dev, 0x98, reg32); + + /* Setup register 9Ch */ + reg16 = 0; /* Disable alternate ID */ + reg16 = 1 << 5; /* BWG step 12 */ + pci_write_config16(dev, 0x9c, reg16); + /* SATA Initialization register */ - pci_write_config32(dev, 0x94, - ((config->sata_port_map ^ 0x3f) << 24) | 0x183); + reg32 = 0x183; + reg32 |= (config->sata_port_map ^ 0x3f) << 24; + reg32 |= (config->sata_devslp_mux & 1) << 15; + pci_write_config32(dev, 0x94, reg32); /* Initialize AHCI memory-mapped space */ abar = pci_read_config32(dev, PCI_BASE_ADDRESS_5); @@ -205,31 +229,29 @@ static void sata_init(struct device *dev) config->sata_port1_gen3_tx); /* Additional Programming Requirements */ - sir_write(dev, 0x04, 0x00001600); - sir_write(dev, 0x28, 0xa0000033); - reg32 = sir_read(dev, 0x54); - reg32 &= 0xff000000; - reg32 |= 0x5555aa; - sir_write(dev, 0x54, reg32); - sir_write(dev, 0x64, 0xcccc8484); + /* Power Optimizer */ + sir_write(dev, 0x64, 0x883c9001); + reg32 = sir_read(dev, 0x68); reg32 &= 0xffff0000; - reg32 |= 0xcccc; + reg32 |= 0x880a; sir_write(dev, 0x68, reg32); - reg32 = sir_read(dev, 0x78); - reg32 &= 0x0000ffff; - reg32 |= 0x88880000; - sir_write(dev, 0x78, reg32); - sir_write(dev, 0x84, 0x001c7000); - sir_write(dev, 0x88, 0x88338822); - sir_write(dev, 0xa0, 0x001c7000); - // a4 - sir_write(dev, 0xc4, 0x0c0c0c0c); - sir_write(dev, 0xc8, 0x0c0c0c0c); - sir_write(dev, 0xd4, 0x10000000); - - pch_iobp_update(0xea004001, 0x3fffffff, 0xc0000000); - pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100); + + reg32 = sir_read(dev, 0x60); + reg32 |= (1 << 0) | (1 << 1) | (1 << 3); + sir_write(dev, 0x60, reg32); + + /* Clock Gating */ + sir_write(dev, 0x70, 0x3f00bf1f); +#if CONFIG_INTEL_LYNXPOINT_LP + sir_write(dev, 0x54, 0xcf000f0f); + sir_write(dev, 0x58, 0x00190000); +#endif + + reg32 = pci_read_config32(dev, 0x300); + reg32 |= (1 << 17) | (1 << 16); + reg32 |= (1 << 31) | (1 << 30) | (1 << 29); + pci_write_config32(dev, 0x300, reg32); } static void sata_enable(device_t dev) @@ -278,9 +300,12 @@ static struct device_operations sata_ops = { .ops_pci = &sata_pci_ops, }; -static const unsigned short pci_device_ids[] = { 0x1c00, 0x1c01, 0x1c02, 0x1c03, - 0x1e00, 0x1e01, 0x1e02, 0x1e03, - 0 }; +static const unsigned short pci_device_ids[] = { + 0x8c00, 0x8c02, 0x8c04, 0x8c06, 0x8c08, 0x8c0e, /* Desktop */ + 0x8c01, 0x8c03, 0x8c05, 0x8c07, 0x8c09, 0x8c0f, /* Mobile */ + 0x9c03, 0x9c05, 0x9c07, 0x9c0f, /* Low Power */ + 0 +}; static const struct pci_driver pch_sata __pci_driver = { .ops = &sata_ops, |