summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/northbridge/via/vt8601/Config.lb2
-rw-r--r--src/northbridge/via/vt8601/chip.h5
-rw-r--r--src/northbridge/via/vt8601/northbridge.c106
-rw-r--r--src/northbridge/via/vt8601/northbridge.h6
-rw-r--r--src/northbridge/via/vt8601/raminit.c2308
-rw-r--r--src/northbridge/via/vt8601/raminit.h4
6 files changed, 2431 insertions, 0 deletions
diff --git a/src/northbridge/via/vt8601/Config.lb b/src/northbridge/via/vt8601/Config.lb
new file mode 100644
index 0000000000..4a0c2c8658
--- /dev/null
+++ b/src/northbridge/via/vt8601/Config.lb
@@ -0,0 +1,2 @@
+config chip.h
+object northbridge.o
diff --git a/src/northbridge/via/vt8601/chip.h b/src/northbridge/via/vt8601/chip.h
new file mode 100644
index 0000000000..b689f0dedd
--- /dev/null
+++ b/src/northbridge/via/vt8601/chip.h
@@ -0,0 +1,5 @@
+struct northbridge_via_vt8601_config
+{
+};
+
+extern struct chip_control northbridge_via_vt8601_control;
diff --git a/src/northbridge/via/vt8601/northbridge.c b/src/northbridge/via/vt8601/northbridge.c
new file mode 100644
index 0000000000..33dc4ec758
--- /dev/null
+++ b/src/northbridge/via/vt8601/northbridge.c
@@ -0,0 +1,106 @@
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
+#include <mem.h>
+#include <part/sizeram.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/hypertransport.h>
+#include <device/chip.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
+#include "chip.h"
+#include "northbridge.h"
+
+struct mem_range *sizeram(void)
+{
+ unsigned long mmio_basek;
+ static struct mem_range mem[10];
+ device_t dev;
+ int i, idx;
+
+#warning "FIXME handle interleaved nodes"
+ dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
+ if (!dev) {
+ printk_err("Cannot find PCI: 0:18.1\n");
+ return 0;
+ }
+ mmio_basek = (dev_root.resource[1].base >> 10);
+ /* Round mmio_basek to something the processor can support */
+ mmio_basek &= ~((1 << 6) -1);
+
+#if 1
+#warning "FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M MMIO hole"
+ /* Round the mmio hold to 256M */
+ mmio_basek &= ~((256*1024) - 1);
+#endif
+
+#if 1
+ printk_debug("mmio_base: %dKB\n", mmio_basek);
+#endif
+
+ for(idx = i = 0; i < 8; i++) {
+ uint32_t base, limit;
+ unsigned basek, limitk, sizek;
+ base = pci_read_config32(dev, 0x40 + (i<<3));
+ limit = pci_read_config32(dev, 0x44 + (i<<3));
+ if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
+ continue;
+ }
+ basek = (base & 0xffff0000) >> 2;
+ limitk = ((limit + 0x00010000) & 0xffff0000) >> 2;
+ sizek = limitk - basek;
+ if ((idx > 0) &&
+ ((mem[idx -1].basek + mem[idx - 1].sizek) == basek)) {
+ mem[idx -1].sizek += sizek;
+ }
+ else {
+ mem[idx].basek = basek;
+ mem[idx].sizek = sizek;
+ idx++;
+ }
+ /* See if I need to split the region to accomodate pci memory space */
+ if ((mem[idx - 1].basek <= mmio_basek) &&
+ ((mem[idx - 1].basek + mem[idx - 1].sizek) > mmio_basek)) {
+ if (mem[idx - 1].basek < mmio_basek) {
+ unsigned pre_sizek;
+ pre_sizek = mmio_basek - mem[idx - 1].basek;
+ mem[idx].basek = mmio_basek;
+ mem[idx].sizek = mem[idx - 1].sizek - pre_sizek;
+ mem[idx - 1].sizek = pre_sizek;
+ idx++;
+ }
+ if ((mem[idx - 1].basek + mem[idx - 1].sizek) <= 4*1024*1024) {
+ idx -= 1;
+ }
+ else {
+ mem[idx - 1].basek = 4*1024*1024;
+ mem[idx - 1].sizek -= (4*1024*1024 - mmio_basek);
+ }
+ }
+ }
+#if 0
+ for(i = 0; i < idx; i++) {
+ printk_debug("mem[%d].basek = %08x mem[%d].sizek = %08x\n",
+ i, mem[i].basek, i, mem[i].sizek);
+ }
+#endif
+ while(idx < sizeof(mem)/sizeof(mem[0])) {
+ mem[idx].basek = 0;
+ mem[idx].sizek = 0;
+ idx++;
+ }
+ return mem;
+}
+static void enumerate(struct chip *chip)
+{
+ extern struct device_operations default_pci_ops_bus;
+ chip_enumerate(chip);
+ chip->dev->ops = &default_pci_ops_bus;
+}
+
+struct chip_control northbridge_via_vt8601_control = {
+ .enumerate = enumerate,
+ .name = "VIA vt8601 Northbridge",
+};
diff --git a/src/northbridge/via/vt8601/northbridge.h b/src/northbridge/via/vt8601/northbridge.h
new file mode 100644
index 0000000000..d7f8e605b8
--- /dev/null
+++ b/src/northbridge/via/vt8601/northbridge.h
@@ -0,0 +1,6 @@
+#ifndef NORTHBRIDGE_VIA_VT8601_H
+#define NORTHBRIDGE_VIA_VT8601_H
+
+extern unsigned int vt8601_scan_root_bus(device_t root, unsigned int max);
+
+#endif /* NORTHBRIDGE_VIA_VT8601_H */
diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c
new file mode 100644
index 0000000000..802e4318b4
--- /dev/null
+++ b/src/northbridge/via/vt8601/raminit.c
@@ -0,0 +1,2308 @@
+#include <cpu/k8/mtrr.h>
+#include "raminit.h"
+
+#define ENABLE_IOMMU 1
+
+/* Function 2 */
+#define DRAM_CSBASE 0x40
+#define DRAM_CSMASK 0x60
+#define DRAM_BANK_ADDR_MAP 0x80
+#define DRAM_TIMING_LOW 0x88
+#define DTL_TCL_SHIFT 0
+#define DTL_TCL_MASK 0x7
+#define DTL_CL_2 1
+#define DTL_CL_3 2
+#define DTL_CL_2_5 5
+#define DTL_TRC_SHIFT 4
+#define DTL_TRC_MASK 0xf
+#define DTL_TRC_BASE 7
+#define DTL_TRC_MIN 7
+#define DTL_TRC_MAX 22
+#define DTL_TRFC_SHIFT 8
+#define DTL_TRFC_MASK 0xf
+#define DTL_TRFC_BASE 9
+#define DTL_TRFC_MIN 9
+#define DTL_TRFC_MAX 24
+#define DTL_TRCD_SHIFT 12
+#define DTL_TRCD_MASK 0x7
+#define DTL_TRCD_BASE 0
+#define DTL_TRCD_MIN 2
+#define DTL_TRCD_MAX 6
+#define DTL_TRRD_SHIFT 16
+#define DTL_TRRD_MASK 0x7
+#define DTL_TRRD_BASE 0
+#define DTL_TRRD_MIN 2
+#define DTL_TRRD_MAX 4
+#define DTL_TRAS_SHIFT 20
+#define DTL_TRAS_MASK 0xf
+#define DTL_TRAS_BASE 0
+#define DTL_TRAS_MIN 5
+#define DTL_TRAS_MAX 15
+#define DTL_TRP_SHIFT 24
+#define DTL_TRP_MASK 0x7
+#define DTL_TRP_BASE 0
+#define DTL_TRP_MIN 2
+#define DTL_TRP_MAX 6
+#define DTL_TWR_SHIFT 28
+#define DTL_TWR_MASK 0x1
+#define DTL_TWR_BASE 2
+#define DTL_TWR_MIN 2
+#define DTL_TWR_MAX 3
+#define DRAM_TIMING_HIGH 0x8c
+#define DTH_TWTR_SHIFT 0
+#define DTH_TWTR_MASK 0x1
+#define DTH_TWTR_BASE 1
+#define DTH_TWTR_MIN 1
+#define DTH_TWTR_MAX 2
+#define DTH_TRWT_SHIFT 4
+#define DTH_TRWT_MASK 0x7
+#define DTH_TRWT_BASE 1
+#define DTH_TRWT_MIN 1
+#define DTH_TRWT_MAX 6
+#define DTH_TREF_SHIFT 8
+#define DTH_TREF_MASK 0x1f
+#define DTH_TREF_100MHZ_4K 0x00
+#define DTH_TREF_133MHZ_4K 0x01
+#define DTH_TREF_166MHZ_4K 0x02
+#define DTH_TREF_200MHZ_4K 0x03
+#define DTH_TREF_100MHZ_8K 0x08
+#define DTH_TREF_133MHZ_8K 0x09
+#define DTH_TREF_166MHZ_8K 0x0A
+#define DTH_TREF_200MHZ_8K 0x0B
+#define DTH_TWCL_SHIFT 20
+#define DTH_TWCL_MASK 0x7
+#define DTH_TWCL_BASE 1
+#define DTH_TWCL_MIN 1
+#define DTH_TWCL_MAX 2
+#define DRAM_CONFIG_LOW 0x90
+#define DCL_DLL_Disable (1<<0)
+#define DCL_D_DRV (1<<1)
+#define DCL_QFC_EN (1<<2)
+#define DCL_DisDqsHys (1<<3)
+#define DCL_DramInit (1<<8)
+#define DCL_DramEnable (1<<10)
+#define DCL_MemClrStatus (1<<11)
+#define DCL_ESR (1<<12)
+#define DCL_SRS (1<<13)
+#define DCL_128BitEn (1<<16)
+#define DCL_DimmEccEn (1<<17)
+#define DCL_UnBufDimm (1<<18)
+#define DCL_32ByteEn (1<<19)
+#define DCL_x4DIMM_SHIFT 20
+#define DRAM_CONFIG_HIGH 0x94
+#define DCH_ASYNC_LAT_SHIFT 0
+#define DCH_ASYNC_LAT_MASK 0xf
+#define DCH_ASYNC_LAT_BASE 0
+#define DCH_ASYNC_LAT_MIN 0
+#define DCH_ASYNC_LAT_MAX 15
+#define DCH_RDPREAMBLE_SHIFT 8
+#define DCH_RDPREAMBLE_MASK 0xf
+#define DCH_RDPREAMBLE_BASE ((2<<1)+0) /* 2.0 ns */
+#define DCH_RDPREAMBLE_MIN ((2<<1)+0) /* 2.0 ns */
+#define DCH_RDPREAMBLE_MAX ((9<<1)+1) /* 9.5 ns */
+#define DCH_IDLE_LIMIT_SHIFT 16
+#define DCH_IDLE_LIMIT_MASK 0x7
+#define DCH_IDLE_LIMIT_0 0
+#define DCH_IDLE_LIMIT_4 1
+#define DCH_IDLE_LIMIT_8 2
+#define DCH_IDLE_LIMIT_16 3
+#define DCH_IDLE_LIMIT_32 4
+#define DCH_IDLE_LIMIT_64 5
+#define DCH_IDLE_LIMIT_128 6
+#define DCH_IDLE_LIMIT_256 7
+#define DCH_DYN_IDLE_CTR_EN (1 << 19)
+#define DCH_MEMCLK_SHIFT 20
+#define DCH_MEMCLK_MASK 0x7
+#define DCH_MEMCLK_100MHZ 0
+#define DCH_MEMCLK_133MHZ 2
+#define DCH_MEMCLK_166MHZ 5
+#define DCH_MEMCLK_200MHZ 7
+#define DCH_MEMCLK_VALID (1 << 25)
+#define DCH_MEMCLK_EN0 (1 << 26)
+#define DCH_MEMCLK_EN1 (1 << 27)
+#define DCH_MEMCLK_EN2 (1 << 28)
+#define DCH_MEMCLK_EN3 (1 << 29)
+
+/* Function 3 */
+#define SCRUB_CONTROL 0x58
+#define SCRUB_NONE 0
+#define SCRUB_40ns 1
+#define SCRUB_80ns 2
+#define SCRUB_160ns 3
+#define SCRUB_320ns 4
+#define SCRUB_640ns 5
+#define SCRUB_1_28us 6
+#define SCRUB_2_56us 7
+#define SCRUB_5_12us 8
+#define SCRUB_10_2us 9
+#define SCRUB_20_5us 10
+#define SCRUB_41_0us 11
+#define SCRUB_81_9us 12
+#define SCRUB_163_8us 13
+#define SCRUB_327_7us 14
+#define SCRUB_655_4us 15
+#define SCRUB_1_31ms 16
+#define SCRUB_2_62ms 17
+#define SCRUB_5_24ms 18
+#define SCRUB_10_49ms 19
+#define SCRUB_20_97ms 20
+#define SCRUB_42ms 21
+#define SCRUB_84ms 22
+#define SC_DRAM_SCRUB_RATE_SHFIT 0
+#define SC_DRAM_SCRUB_RATE_MASK 0x1f
+#define SC_L2_SCRUB_RATE_SHIFT 8
+#define SC_L2_SCRUB_RATE_MASK 0x1f
+#define SC_L1D_SCRUB_RATE_SHIFT 16
+#define SC_L1D_SCRUB_RATE_MASK 0x1f
+#define SCRUB_ADDR_LOW 0x5C
+#define SCRUB_ADDR_HIGH 0x60
+#define NORTHBRIDGE_CAP 0xE8
+#define NBCAP_128Bit 0x0001
+#define NBCAP_MP 0x0002
+#define NBCAP_BIG_MP 0x0004
+#define NBCAP_ECC 0x0004
+#define NBCAP_CHIPKILL_ECC 0x0010
+#define NBCAP_MEMCLK_SHIFT 5
+#define NBCAP_MEMCLK_MASK 3
+#define NBCAP_MEMCLK_100MHZ 3
+#define NBCAP_MEMCLK_133MHZ 2
+#define NBCAP_MEMCLK_166MHZ 1
+#define NBCAP_MEMCLK_200MHZ 0
+#define NBCAP_MEMCTRL 0x0100
+
+
+static void setup_resource_map(const unsigned int *register_values, int max)
+{
+ int i;
+ print_debug("setting up resource map....\r\n");
+ for(i = 0; i < max; i += 3) {
+ device_t dev;
+ unsigned where;
+ unsigned long reg;
+#if 0
+ print_debug_hex32(register_values[i]);
+ print_debug(" <-");
+ print_debug_hex32(register_values[i+2]);
+ print_debug("\r\n");
+#endif
+ dev = register_values[i] & ~0xff;
+ where = register_values[i] & 0xff;
+ reg = pci_read_config32(dev, where);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2];
+ pci_write_config32(dev, where, reg);
+#if 0
+ reg = pci_read_config32(register_values[i]);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2] & ~register_values[i+1];
+ pci_write_config32(register_values[i], reg);
+#endif
+ }
+ print_debug("done.\r\n");
+}
+
+static void setup_default_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+ };
+ int max;
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ setup_resource_map(register_values, max);
+}
+
+static void sdram_set_registers(const struct mem_controller *ctrl)
+{
+ static const unsigned int register_values[] = {
+
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* DRAM CS Base Address i Registers
+ * F2:0x40 i = 0
+ * F2:0x44 i = 1
+ * F2:0x48 i = 2
+ * F2:0x4C i = 3
+ * F2:0x50 i = 4
+ * F2:0x54 i = 5
+ * F2:0x58 i = 6
+ * F2:0x5C i = 7
+ * [ 0: 0] Chip-Select Bank Enable
+ * 0 = Bank Disabled
+ * 1 = Bank Enabled
+ * [ 8: 1] Reserved
+ * [15: 9] Base Address (19-13)
+ * An optimization used when all DIMM are the same size...
+ * [20:16] Reserved
+ * [31:21] Base Address (35-25)
+ * This field defines the top 11 addresses bit of a 40-bit
+ * address that define the memory address space. These
+ * bits decode 32-MByte blocks of memory.
+ */
+ PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000,
+ /* DRAM CS Mask Address i Registers
+ * F2:0x60 i = 0
+ * F2:0x64 i = 1
+ * F2:0x68 i = 2
+ * F2:0x6C i = 3
+ * F2:0x70 i = 4
+ * F2:0x74 i = 5
+ * F2:0x78 i = 6
+ * F2:0x7C i = 7
+ * Select bits to exclude from comparison with the DRAM Base address register.
+ * [ 8: 0] Reserved
+ * [15: 9] Address Mask (19-13)
+ * Address to be excluded from the optimized case
+ * [20:16] Reserved
+ * [29:21] Address Mask (33-25)
+ * The bits with an address mask of 1 are excluded from address comparison
+ * [31:30] Reserved
+ *
+ */
+ PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000,
+ /* DRAM Bank Address Mapping Register
+ * F2:0x80
+ * Specify the memory module size
+ * [ 2: 0] CS1/0
+ * [ 6: 4] CS3/2
+ * [10: 8] CS5/4
+ * [14:12] CS7/6
+ * 000 = 32Mbyte (Rows = 12 & Col = 8)
+ * 001 = 64Mbyte (Rows = 12 & Col = 9)
+ * 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10)
+ * 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11)
+ * 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10)
+ * 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12)
+ * 110 = 2Gbyte (Rows = 14 & Col = 12)
+ * 111 = reserved
+ * [ 3: 3] Reserved
+ * [ 7: 7] Reserved
+ * [11:11] Reserved
+ * [31:15]
+ */
+ PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000000,
+ /* DRAM Timing Low Register
+ * F2:0x88
+ * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
+ * 000 = reserved
+ * 001 = CL 2
+ * 010 = CL 3
+ * 011 = reserved
+ * 100 = reserved
+ * 101 = CL 2.5
+ * 110 = reserved
+ * 111 = reserved
+ * [ 3: 3] Reserved
+ * [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh)
+ * 0000 = 7 bus clocks
+ * 0001 = 8 bus clocks
+ * ...
+ * 1110 = 21 bus clocks
+ * 1111 = 22 bus clocks
+ * [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh)
+ * 0000 = 9 bus clocks
+ * 0010 = 10 bus clocks
+ * ....
+ * 1110 = 23 bus clocks
+ * 1111 = 24 bus clocks
+ * [14:12] Trcd (Ras#-active to Case#-read/write Delay)
+ * 000 = reserved
+ * 001 = reserved
+ * 010 = 2 bus clocks
+ * 011 = 3 bus clocks
+ * 100 = 4 bus clocks
+ * 101 = 5 bus clocks
+ * 110 = 6 bus clocks
+ * 111 = reserved
+ * [15:15] Reserved
+ * [18:16] Trrd (Ras# to Ras# Delay)
+ * 000 = reserved
+ * 001 = reserved
+ * 010 = 2 bus clocks
+ * 011 = 3 bus clocks
+ * 100 = 4 bus clocks
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = reserved
+ * [19:19] Reserved
+ * [23:20] Tras (Minmum Ras# Active Time)
+ * 0000 to 0100 = reserved
+ * 0101 = 5 bus clocks
+ * ...
+ * 1111 = 15 bus clocks
+ * [26:24] Trp (Row Precharge Time)
+ * 000 = reserved
+ * 001 = reserved
+ * 010 = 2 bus clocks
+ * 011 = 3 bus clocks
+ * 100 = 4 bus clocks
+ * 101 = 5 bus clocks
+ * 110 = 6 bus clocks
+ * 111 = reserved
+ * [27:27] Reserved
+ * [28:28] Twr (Write Recovery Time)
+ * 0 = 2 bus clocks
+ * 1 = 3 bus clocks
+ * [31:29] Reserved
+ */
+ PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x02522001 /* 0x03623125 */ ,
+ /* DRAM Timing High Register
+ * F2:0x8C
+ * [ 0: 0] Twtr (Write to Read Delay)
+ * 0 = 1 bus Clocks
+ * 1 = 2 bus Clocks
+ * [ 3: 1] Reserved
+ * [ 6: 4] Trwt (Read to Write Delay)
+ * 000 = 1 bus clocks
+ * 001 = 2 bus clocks
+ * 010 = 3 bus clocks
+ * 011 = 4 bus clocks
+ * 100 = 5 bus clocks
+ * 101 = 6 bus clocks
+ * 110 = reserved
+ * 111 = reserved
+ * [ 7: 7] Reserved
+ * [12: 8] Tref (Refresh Rate)
+ * 00000 = 100Mhz 4K rows
+ * 00001 = 133Mhz 4K rows
+ * 00010 = 166Mhz 4K rows
+ * 00011 = 200Mhz 4K rows
+ * 01000 = 100Mhz 8K/16K rows
+ * 01001 = 133Mhz 8K/16K rows
+ * 01010 = 166Mhz 8K/16K rows
+ * 01011 = 200Mhz 8K/16K rows
+ * [19:13] Reserved
+ * [22:20] Twcl (Write CAS Latency)
+ * 000 = 1 Mem clock after CAS# (Unbuffered Dimms)
+ * 001 = 2 Mem clocks after CAS# (Registered Dimms)
+ * [31:23] Reserved
+ */
+ PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, (0 << 20)|(0 << 8)|(0 << 4)|(0 << 0),
+ /* DRAM Config Low Register
+ * F2:0x90
+ * [ 0: 0] DLL Disable
+ * 0 = Enabled
+ * 1 = Disabled
+ * [ 1: 1] D_DRV
+ * 0 = Normal Drive
+ * 1 = Weak Drive
+ * [ 2: 2] QFC_EN
+ * 0 = Disabled
+ * 1 = Enabled
+ * [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully)
+ * 0 = Enable DQS input filter
+ * 1 = Disable DQS input filtering
+ * [ 7: 4] Reserved
+ * [ 8: 8] DRAM_Init
+ * 0 = Initialization done or not yet started.
+ * 1 = Initiate DRAM intialization sequence
+ * [ 9: 9] SO-Dimm Enable
+ * 0 = Do nothing
+ * 1 = SO-Dimms present
+ * [10:10] DramEnable
+ * 0 = DRAM not enabled
+ * 1 = DRAM initialized and enabled
+ * [11:11] Memory Clear Status
+ * 0 = Memory Clear function has not completed
+ * 1 = Memory Clear function has completed
+ * [12:12] Exit Self-Refresh
+ * 0 = Exit from self-refresh done or not yet started
+ * 1 = DRAM exiting from self refresh
+ * [13:13] Self-Refresh Status
+ * 0 = Normal Operation
+ * 1 = Self-refresh mode active
+ * [15:14] Read/Write Queue Bypass Count
+ * 00 = 2
+ * 01 = 4
+ * 10 = 8
+ * 11 = 16
+ * [16:16] 128-bit/64-Bit
+ * 0 = 64bit Interface to DRAM
+ * 1 = 128bit Interface to DRAM
+ * [17:17] DIMM ECC Enable
+ * 0 = Some DIMMs do not have ECC
+ * 1 = ALL DIMMS have ECC bits
+ * [18:18] UnBuffered DIMMs
+ * 0 = Buffered DIMMS
+ * 1 = Unbuffered DIMMS
+ * [19:19] Enable 32-Byte Granularity
+ * 0 = Optimize for 64byte bursts
+ * 1 = Optimize for 32byte bursts
+ * [20:20] DIMM 0 is x4
+ * [21:21] DIMM 1 is x4
+ * [22:22] DIMM 2 is x4
+ * [23:23] DIMM 3 is x4
+ * 0 = DIMM is not x4
+ * 1 = x4 DIMM present
+ * [24:24] Disable DRAM Receivers
+ * 0 = Receivers enabled
+ * 1 = Receivers disabled
+ * [27:25] Bypass Max
+ * 000 = Arbiters chois is always respected
+ * 001 = Oldest entry in DCQ can be bypassed 1 time
+ * 010 = Oldest entry in DCQ can be bypassed 2 times
+ * 011 = Oldest entry in DCQ can be bypassed 3 times
+ * 100 = Oldest entry in DCQ can be bypassed 4 times
+ * 101 = Oldest entry in DCQ can be bypassed 5 times
+ * 110 = Oldest entry in DCQ can be bypassed 6 times
+ * 111 = Oldest entry in DCQ can be bypassed 7 times
+ * [31:28] Reserved
+ */
+ PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
+ (4 << 25)|(0 << 24)|
+ (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
+ (1 << 19)|(0 << 18)|(1 << 17)|(0 << 16)|
+ (2 << 14)|(0 << 13)|(0 << 12)|
+ (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
+ (0 << 3) |(0 << 1) |(0 << 0),
+ /* DRAM Config High Register
+ * F2:0x94
+ * [ 0: 3] Maximum Asynchronous Latency
+ * 0000 = 0 ns
+ * ...
+ * 1111 = 15 ns
+ * [ 7: 4] Reserved
+ * [11: 8] Read Preamble
+ * 0000 = 2.0 ns
+ * 0001 = 2.5 ns
+ * 0010 = 3.0 ns
+ * 0011 = 3.5 ns
+ * 0100 = 4.0 ns
+ * 0101 = 4.5 ns
+ * 0110 = 5.0 ns
+ * 0111 = 5.5 ns
+ * 1000 = 6.0 ns
+ * 1001 = 6.5 ns
+ * 1010 = 7.0 ns
+ * 1011 = 7.5 ns
+ * 1100 = 8.0 ns
+ * 1101 = 8.5 ns
+ * 1110 = 9.0 ns
+ * 1111 = 9.5 ns
+ * [15:12] Reserved
+ * [18:16] Idle Cycle Limit
+ * 000 = 0 cycles
+ * 001 = 4 cycles
+ * 010 = 8 cycles
+ * 011 = 16 cycles
+ * 100 = 32 cycles
+ * 101 = 64 cycles
+ * 110 = 128 cycles
+ * 111 = 256 cycles
+ * [19:19] Dynamic Idle Cycle Center Enable
+ * 0 = Use Idle Cycle Limit
+ * 1 = Generate a dynamic Idle cycle limit
+ * [22:20] DRAM MEMCLK Frequency
+ * 000 = 100Mhz
+ * 001 = reserved
+ * 010 = 133Mhz
+ * 011 = reserved
+ * 100 = reserved
+ * 101 = 166Mhz
+ * 110 = reserved
+ * 111 = reserved
+ * [24:23] Reserved
+ * [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk)
+ * 0 = Disable MemClks
+ * 1 = Enable MemClks
+ * [26:26] Memory Clock 0 Enable
+ * 0 = Disabled
+ * 1 = Enabled
+ * [27:27] Memory Clock 1 Enable
+ * 0 = Disabled
+ * 1 = Enabled
+ * [28:28] Memory Clock 2 Enable
+ * 0 = Disabled
+ * 1 = Enabled
+ * [29:29] Memory Clock 3 Enable
+ * 0 = Disabled
+ * 1 = Enabled
+ * [31:30] Reserved
+ */
+ PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0,
+ (0 << 29)|(0 << 28)|(0 << 27)|(0 << 26)|(0 << 25)|
+ (0 << 20)|(0 << 19)|(DCH_IDLE_LIMIT_16 << 16)|(0 << 8)|(0 << 0),
+ /* DRAM Delay Line Register
+ * F2:0x98
+ * Adjust the skew of the input DQS strobe relative to DATA
+ * [15: 0] Reserved
+ * [23:16] Delay Line Adjust
+ * Adjusts the DLL derived PDL delay by one or more delay stages
+ * in either the faster or slower direction.
+ * [24:24} Adjust Slower
+ * 0 = Do Nothing
+ * 1 = Adj is used to increase the PDL delay
+ * [25:25] Adjust Faster
+ * 0 = Do Nothing
+ * 1 = Adj is used to decrease the PDL delay
+ * [31:26] Reserved
+ */
+ PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000,
+ /* DRAM Scrub Control Register
+ * F3:0x58
+ * [ 4: 0] DRAM Scrube Rate
+ * [ 7: 5] reserved
+ * [12: 8] L2 Scrub Rate
+ * [15:13] reserved
+ * [20:16] Dcache Scrub
+ * [31:21] reserved
+ * Scrub Rates
+ * 00000 = Do not scrub
+ * 00001 = 40.00 ns
+ * 00010 = 80.00 ns
+ * 00011 = 160.00 ns
+ * 00100 = 320.00 ns
+ * 00101 = 640.00 ns
+ * 00110 = 1.28 us
+ * 00111 = 2.56 us
+ * 01000 = 5.12 us
+ * 01001 = 10.20 us
+ * 01011 = 41.00 us
+ * 01100 = 81.90 us
+ * 01101 = 163.80 us
+ * 01110 = 327.70 us
+ * 01111 = 655.40 us
+ * 10000 = 1.31 ms
+ * 10001 = 2.62 ms
+ * 10010 = 5.24 ms
+ * 10011 = 10.49 ms
+ * 10100 = 20.97 ms
+ * 10101 = 42.00 ms
+ * 10110 = 84.00 ms
+ * All Others = Reserved
+ */
+ PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000,
+ /* DRAM Scrub Address Low Register
+ * F3:0x5C
+ * [ 0: 0] DRAM Scrubber Redirect Enable
+ * 0 = Do nothing
+ * 1 = Scrubber Corrects errors found in normal operation
+ * [ 5: 1] Reserved
+ * [31: 6] DRAM Scrub Address 31-6
+ */
+ PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000,
+ /* DRAM Scrub Address High Register
+ * F3:0x60
+ * [ 7: 0] DRAM Scrubb Address 39-32
+ * [31: 8] Reserved
+ */
+ PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000,
+
+#if ENABLE_IOMMU != 0
+ /* BY LYH add IOMMU 64M APERTURE */
+ PCI_ADDR(0, 0x18, 3, 0x94), 0xffff8000, 0x00000f70,
+ PCI_ADDR(0, 0x18, 3, 0x90), 0xffffff80, 0x00000002,
+ PCI_ADDR(0, 0x18, 3, 0x98), 0x0000000f, 0x00068300,
+#endif
+ };
+ int i;
+ int max;
+ print_debug("setting up CPU");
+ print_debug_hex8(ctrl->node_id);
+ print_debug(" northbridge registers\r\n");
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ for(i = 0; i < max; i += 3) {
+ device_t dev;
+ unsigned where;
+ unsigned long reg;
+#if 0
+ print_debug_hex32(register_values[i]);
+ print_debug(" <-");
+ print_debug_hex32(register_values[i+2]);
+ print_debug("\r\n");
+#endif
+ dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x18, 0) + ctrl->f0;
+ where = register_values[i] & 0xff;
+ reg = pci_read_config32(dev, where);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2];
+ pci_write_config32(dev, where, reg);
+#if 0
+
+ reg = pci_read_config32(register_values[i]);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2];
+ pci_write_config32(register_values[i], reg);
+#endif
+ }
+ print_debug("done.\r\n");
+}
+
+
+static int is_dual_channel(const struct mem_controller *ctrl)
+{
+ uint32_t dcl;
+ dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
+ return dcl & DCL_128BitEn;
+}
+
+static int is_opteron(const struct mem_controller *ctrl)
+{
+ /* Test to see if I am an Opteron.
+ * FIXME Testing dual channel capability is correct for now
+ * but a beter test is probably required.
+ */
+#warning "FIXME implement a better test for opterons"
+ uint32_t nbcap;
+ nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
+ return !!(nbcap & NBCAP_128Bit);
+}
+
+static int is_registered(const struct mem_controller *ctrl)
+{
+ /* Test to see if we are dealing with registered SDRAM.
+ * If we are not registered we are unbuffered.
+ * This function must be called after spd_handle_unbuffered_dimms.
+ */
+ uint32_t dcl;
+ dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
+ return !(dcl & DCL_UnBufDimm);
+}
+
+struct dimm_size {
+ unsigned long side1;
+ unsigned long side2;
+};
+
+static struct dimm_size spd_get_dimm_size(unsigned device)
+{
+ /* Calculate the log base 2 size of a DIMM in bits */
+ struct dimm_size sz;
+ int value, low;
+ sz.side1 = 0;
+ sz.side2 = 0;
+
+ /* Note it might be easier to use byte 31 here, it has the DIMM size as
+ * a multiple of 4MB. The way we do it now we can size both
+ * sides of an assymetric dimm.
+ */
+ value = spd_read_byte(device, 3); /* rows */
+ if (value < 0) goto out;
+ sz.side1 += value & 0xf;
+
+ value = spd_read_byte(device, 4); /* columns */
+ if (value < 0) goto out;
+ sz.side1 += value & 0xf;
+
+ value = spd_read_byte(device, 17); /* banks */
+ if (value < 0) goto out;
+ sz.side1 += log2(value & 0xff);
+
+ /* Get the module data width and convert it to a power of two */
+ value = spd_read_byte(device, 7); /* (high byte) */
+ if (value < 0) goto out;
+ value &= 0xff;
+ value <<= 8;
+
+ low = spd_read_byte(device, 6); /* (low byte) */
+ if (low < 0) goto out;
+ value = value | (low & 0xff);
+ sz.side1 += log2(value);
+
+ /* side 2 */
+ value = spd_read_byte(device, 5); /* number of physical banks */
+ if (value <= 1) goto out;
+
+ /* Start with the symmetrical case */
+ sz.side2 = sz.side1;
+
+ value = spd_read_byte(device, 3); /* rows */
+ if (value < 0) goto out;
+ if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */
+ sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */
+ sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */
+
+ value = spd_read_byte(device, 4); /* columns */
+ if (value < 0) goto out;
+ sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */
+ sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */
+
+ out:
+ return sz;
+}
+
+static void set_dimm_size(const struct mem_controller *ctrl, struct dimm_size sz, unsigned index)
+{
+ uint32_t base0, base1, map;
+ uint32_t dch;
+
+#if 0
+ print_debug("set_dimm_size: (");
+ print_debug_hex32(sz.side1);
+ print_debug_char(',');
+ print_debug_hex32(sz.side2);
+ print_debug_char(',');
+ print_debug_hex32(index);
+ print_debug(")\r\n");
+#endif
+ if (sz.side1 != sz.side2) {
+ sz.side2 = 0;
+ }
+ map = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP);
+ map &= ~(0xf << (index + 4));
+
+ /* For each base register.
+ * Place the dimm size in 32 MB quantities in the bits 31 - 21.
+ * The initialize dimm size is in bits.
+ * Set the base enable bit0.
+ */
+
+ base0 = base1 = 0;
+
+ /* Make certain side1 of the dimm is at least 32MB */
+ if (sz.side1 >= (25 +3)) {
+ map |= (sz.side1 - (25 + 3)) << (index *4);
+ base0 = (1 << ((sz.side1 - (25 + 3)) + 21)) | 1;
+ }
+ /* Make certain side2 of the dimm is at least 32MB */
+ if (sz.side2 >= (25 + 3)) {
+ base1 = (1 << ((sz.side2 - (25 + 3)) + 21)) | 1;
+ }
+
+ /* Double the size if we are using dual channel memory */
+ if (is_dual_channel(ctrl)) {
+ base0 = (base0 << 1) | (base0 & 1);
+ base1 = (base1 << 1) | (base1 & 1);
+ }
+
+ /* Clear the reserved bits */
+ base0 &= ~0x001ffffe;
+ base1 &= ~0x001ffffe;
+
+ /* Set the appropriate DIMM base address register */
+ pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), base0);
+ pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), base1);
+ pci_write_config32(ctrl->f2, DRAM_BANK_ADDR_MAP, map);
+
+ /* Enable the memory clocks for this DIMM */
+ if (base0) {
+ dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
+ dch |= DCH_MEMCLK_EN0 << index;
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
+ }
+}
+
+static void spd_set_ram_size(const struct mem_controller *ctrl)
+{
+ int i;
+
+ for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
+ struct dimm_size sz;
+ sz = spd_get_dimm_size(ctrl->channel0[i]);
+ set_dimm_size(ctrl, sz, i);
+ }
+}
+
+//BY LYH //Fill next base reg with right value
+static void fill_last(unsigned long node_id,unsigned long base)
+{
+ unsigned i;
+ unsigned base_reg;
+ base &=0xffff0000;
+ device_t device;
+ for(device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device
++= PCI_DEV(0, 1, 0)) {
+ for(i=node_id+1;i<=7;i++) {
+ base_reg=0x40+(i<<3);
+ pci_write_config32(device,base_reg,base);
+ }
+ }
+}
+//BY LYH END
+
+static void route_dram_accesses(const struct mem_controller *ctrl,
+ unsigned long base_k, unsigned long limit_k)
+{
+ /* Route the addresses to the controller node */
+ unsigned node_id;
+ unsigned limit;
+ unsigned base;
+ unsigned index;
+ unsigned limit_reg, base_reg;
+ device_t device;
+
+ node_id = ctrl->node_id;
+ index = (node_id << 3);
+ limit = (limit_k << 2);
+ limit &= 0xffff0000;
+ limit -= 0x00010000;
+ limit |= ( 0 << 8) | (node_id << 0);
+ base = (base_k << 2);
+ base &= 0xffff0000;
+ base |= (0 << 8) | (1<<1) | (1<<0);
+
+ limit_reg = 0x44 + index;
+ base_reg = 0x40 + index;
+ for(device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device += PCI_DEV(0, 1, 0)) {
+ pci_write_config32(device, limit_reg, limit);
+ pci_write_config32(device, base_reg, base);
+ }
+}
+
+static void set_top_mem(unsigned tom_k)
+{
+ /* Error if I don't have memory */
+ if (!tom_k) {
+ die("No memory");
+ }
+
+#if 1
+ /* Report the amount of memory. */
+ print_debug("RAM: 0x");
+ print_debug_hex32(tom_k);
+ print_debug(" KB\r\n");
+#endif
+
+ /* Now set top of memory */
+ msr_t msr;
+ msr.lo = (tom_k & 0x003fffff) << 10;
+ msr.hi = (tom_k & 0xffc00000) >> 22;
+ wrmsr(TOP_MEM2, msr);
+
+ /* Leave a 64M hole between TOP_MEM and TOP_MEM2
+ * so I can see my rom chip and other I/O devices.
+ */
+ if (tom_k >= 0x003f0000) {
+ tom_k = 0x3f0000;
+ }
+ msr.lo = (tom_k & 0x003fffff) << 10;
+ msr.hi = (tom_k & 0xffc00000) >> 22;
+ wrmsr(TOP_MEM, msr);
+}
+
+static void order_dimms(const struct mem_controller *ctrl)
+{
+ unsigned long tom, tom_k, base_k;
+ unsigned node_id;
+
+ /* Compute the memory base address address */
+ base_k = 0;
+ /* Remember which registers we have used in the high 8 bits of tom */
+ tom = base_k >> 15;
+ for(;;) {
+ /* Find the largest remaining canidate */
+ unsigned index, canidate;
+ uint32_t csbase, csmask;
+ unsigned size;
+ csbase = 0;
+ canidate = 0;
+ for(index = 0; index < 8; index++) {
+ uint32_t value;
+ value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2));
+
+ /* Is it enabled? */
+ if (!(value & 1)) {
+ continue;
+ }
+
+ /* Is it greater? */
+ if (value <= csbase) {
+ continue;
+ }
+
+ /* Has it already been selected */
+ if (tom & (1 << (index + 24))) {
+ continue;
+ }
+ /* I have a new canidate */
+ csbase = value;
+ canidate = index;
+ }
+ /* See if I have found a new canidate */
+ if (csbase == 0) {
+ break;
+ }
+
+ /* Remember the dimm size */
+ size = csbase >> 21;
+
+ /* Remember I have used this register */
+ tom |= (1 << (canidate + 24));
+
+ /* Recompute the cs base register value */
+ csbase = (tom << 21) | 1;
+
+ /* Increment the top of memory */
+ tom += size;
+
+ /* Compute the memory mask */
+ csmask = ((size -1) << 21);
+ csmask |= 0xfe00; /* For now don't optimize */
+#warning "Don't forget to optimize the DIMM size"
+
+ /* Write the new base register */
+ pci_write_config32(ctrl->f2, DRAM_CSBASE + (canidate << 2), csbase);
+ /* Write the new mask register */
+ pci_write_config32(ctrl->f2, DRAM_CSMASK + (canidate << 2), csmask);
+
+ }
+ tom_k = (tom & ~0xff000000) << 15;
+
+ /* Compute the memory base address */
+ base_k = 0;
+ for(node_id = 0; node_id < ctrl->node_id; node_id++) {
+ uint32_t limit, base;
+ unsigned index;
+ index = node_id << 3;
+ base = pci_read_config32(ctrl->f1, 0x40 + index);
+ /* Only look at the limit if the base is enabled */
+ if ((base & 3) == 3) {
+ limit = pci_read_config32(ctrl->f1, 0x44 + index);
+ base_k = ((limit + 0x00010000) & 0xffff0000) >> 2;
+ }
+ }
+ tom_k += base_k;
+#if 0
+ print_debug("tom: ");
+ print_debug_hex32(tom);
+ print_debug(" base_k: ");
+ print_debug_hex32(base_k);
+ print_debug(" tom_k: ");
+ print_debug_hex32(tom_k);
+ print_debug("\r\n");
+#endif
+ route_dram_accesses(ctrl, base_k, tom_k);
+//BY LYH
+ fill_last(ctrl->node_id, tom_k<<2);
+//BY LYH END
+ set_top_mem(tom_k);
+}
+
+static void disable_dimm(const struct mem_controller *ctrl, unsigned index)
+{
+ print_debug("disabling dimm");
+ print_debug_hex8(index);
+ print_debug("\r\n");
+ pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), 0);
+ pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), 0);
+}
+
+
+static void spd_handle_unbuffered_dimms(const struct mem_controller *ctrl)
+{
+ int i;
+ int registered;
+ int unbuffered;
+ uint32_t dcl;
+ unbuffered = 0;
+ registered = 0;
+ for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
+ int value;
+ value = spd_read_byte(ctrl->channel0[i], 21);
+ if (value < 0) {
+ disable_dimm(ctrl, i);
+ continue;
+ }
+ /* Registered dimm ? */
+ if (value & (1 << 1)) {
+ registered = 1;
+ }
+ /* Otherwise it must be an unbuffered dimm */
+ else {
+ unbuffered = 1;
+ }
+ }
+ if (unbuffered && registered) {
+ die("Mixed buffered and registered dimms not supported");
+ }
+ if (unbuffered && is_opteron(ctrl)) {
+ die("Unbuffered Dimms not supported on Opteron");
+ }
+
+ dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
+ dcl &= ~DCL_UnBufDimm;
+ if (unbuffered) {
+ dcl |= DCL_UnBufDimm;
+ }
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
+#if 0
+ if (is_registered(ctrl)) {
+ print_debug("Registered\r\n");
+ } else {
+ print_debug("Unbuffered\r\n");
+ }
+#endif
+}
+
+static void spd_enable_2channels(const struct mem_controller *ctrl)
+{
+ int i;
+ uint32_t nbcap;
+ /* SPD addresses to verify are identical */
+#warning "FINISHME review and see if these are the bytes I need"
+ /* FINISHME review and see if these are the bytes I need */
+ static const unsigned addresses[] = {
+ 2, /* Type should be DDR SDRAM */
+ 3, /* *Row addresses */
+ 4, /* *Column addresses */
+ 5, /* *Physical Banks */
+ 6, /* *Module Data Width low */
+ 7, /* *Module Data Width high */
+ 9, /* *Cycle time at highest CAS Latency CL=X */
+ 11, /* *SDRAM Type */
+ 13, /* *SDRAM Width */
+ 17, /* *Logical Banks */
+ 18, /* *Supported CAS Latencies */
+ 21, /* *SDRAM Module Attributes */
+ 23, /* *Cycle time at CAS Latnecy (CLX - 0.5) */
+ 26, /* *Cycle time at CAS Latnecy (CLX - 1.0) */
+ 27, /* *tRP Row precharge time */
+ 28, /* *Minimum Row Active to Row Active Delay (tRRD) */
+ 29, /* *tRCD RAS to CAS */
+ 30, /* *tRAS Activate to Precharge */
+ 41, /* *Minimum Active to Active/Auto Refresh Time(Trc) */
+ 42, /* *Minimum Auto Refresh Command Time(Trfc) */
+ };
+ nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
+ if (!(nbcap & NBCAP_128Bit)) {
+ return;
+ }
+ for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
+ unsigned device0, device1;
+ int value0, value1;
+ int j;
+ device0 = ctrl->channel0[i];
+ device1 = ctrl->channel1[i];
+ if (!device1)
+ return;
+ for(j = 0; j < sizeof(addresses)/sizeof(addresses[0]); j++) {
+ unsigned addr;
+ addr = addresses[j];
+ value0 = spd_read_byte(device0, addr);
+ if (value0 < 0) {
+ break;
+ }
+ value1 = spd_read_byte(device1, addr);
+ if (value1 < 0) {
+ return;
+ }
+ if (value0 != value1) {
+ return;
+ }
+ }
+ }
+ print_debug("Enabling dual channel memory\r\n");
+ uint32_t dcl;
+ dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
+ dcl &= ~DCL_32ByteEn;
+ dcl |= DCL_128BitEn;
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
+}
+
+struct mem_param {
+ uint8_t cycle_time;
+ uint8_t divisor; /* In 1/2 ns increments */
+ uint8_t tRC;
+ uint8_t tRFC;
+ uint32_t dch_memclk;
+ uint16_t dch_tref4k, dch_tref8k;
+ uint8_t dtl_twr;
+ char name[9];
+};
+
+static const struct mem_param *get_mem_param(unsigned min_cycle_time)
+{
+ static const struct mem_param speed[] = {
+ {
+ .name = "100Mhz\r\n",
+ .cycle_time = 0xa0,
+ .divisor = (10 <<1),
+ .tRC = 0x46,
+ .tRFC = 0x50,
+ .dch_memclk = DCH_MEMCLK_100MHZ << DCH_MEMCLK_SHIFT,
+ .dch_tref4k = DTH_TREF_100MHZ_4K,
+ .dch_tref8k = DTH_TREF_100MHZ_8K,
+ .dtl_twr = 2,
+ },
+ {
+ .name = "133Mhz\r\n",
+ .cycle_time = 0x75,
+ .divisor = (7<<1)+1,
+ .tRC = 0x41,
+ .tRFC = 0x4B,
+ .dch_memclk = DCH_MEMCLK_133MHZ << DCH_MEMCLK_SHIFT,
+ .dch_tref4k = DTH_TREF_133MHZ_4K,
+ .dch_tref8k = DTH_TREF_133MHZ_8K,
+ .dtl_twr = 2,
+ },
+ {
+ .name = "166Mhz\r\n",
+ .cycle_time = 0x60,
+ .divisor = (6<<1),
+ .tRC = 0x3C,
+ .tRFC = 0x48,
+ .dch_memclk = DCH_MEMCLK_166MHZ << DCH_MEMCLK_SHIFT,
+ .dch_tref4k = DTH_TREF_166MHZ_4K,
+ .dch_tref8k = DTH_TREF_166MHZ_8K,
+ .dtl_twr = 3,
+ },
+ {
+ .name = "200Mhz\r\n",
+ .cycle_time = 0x50,
+ .divisor = (5<<1),
+ .tRC = 0x37,
+ .tRFC = 0x46,
+ .dch_memclk = DCH_MEMCLK_200MHZ << DCH_MEMCLK_SHIFT,
+ .dch_tref4k = DTH_TREF_200MHZ_4K,
+ .dch_tref8k = DTH_TREF_200MHZ_8K,
+ .dtl_twr = 3,
+ },
+ {
+ .cycle_time = 0x00,
+ },
+ };
+ const struct mem_param *param;
+ for(param = &speed[0]; param->cycle_time ; param++) {
+ if (min_cycle_time > (param+1)->cycle_time) {
+ break;
+ }
+ }
+ if (!param->cycle_time) {
+ die("min_cycle_time to low");
+ }
+#if 1
+ print_debug(param->name);
+#endif
+ return param;
+}
+
+static const struct mem_param *spd_set_memclk(const struct mem_controller *ctrl)
+{
+ /* Compute the minimum cycle time for these dimms */
+ const struct mem_param *param;
+ unsigned min_cycle_time, min_latency;
+ int i;
+ uint32_t value;
+
+ static const int latency_indicies[] = { 26, 23, 9 };
+ static const unsigned char min_cycle_times[] = {
+ [NBCAP_MEMCLK_200MHZ] = 0x50, /* 5ns */
+ [NBCAP_MEMCLK_166MHZ] = 0x60, /* 6ns */
+ [NBCAP_MEMCLK_133MHZ] = 0x75, /* 7.5ns */
+ [NBCAP_MEMCLK_100MHZ] = 0xa0, /* 10ns */
+ };
+
+
+ value = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
+ min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK];
+ min_latency = 2;
+
+#if 0
+ print_debug("min_cycle_time: ");
+ print_debug_hex8(min_cycle_time);
+ print_debug(" min_latency: ");
+ print_debug_hex8(min_latency);
+ print_debug("\r\n");
+#endif
+
+ /* Compute the least latency with the fastest clock supported
+ * by both the memory controller and the dimms.
+ */
+ for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
+ int new_cycle_time, new_latency;
+ int index;
+ int latencies;
+ int latency;
+
+ /* First find the supported CAS latencies
+ * Byte 18 for DDR SDRAM is interpreted:
+ * bit 0 == CAS Latency = 1.0
+ * bit 1 == CAS Latency = 1.5
+ * bit 2 == CAS Latency = 2.0
+ * bit 3 == CAS Latency = 2.5
+ * bit 4 == CAS Latency = 3.0
+ * bit 5 == CAS Latency = 3.5
+ * bit 6 == TBD
+ * bit 7 == TBD
+ */
+ new_cycle_time = 0xa0;
+ new_latency = 5;
+
+ latencies = spd_read_byte(ctrl->channel0[i], 18);
+ if (latencies <= 0) continue;
+
+ /* Compute the lowest cas latency supported */
+ latency = log2(latencies) -2;
+
+ /* Loop through and find a fast clock with a low latency */
+ for(index = 0; index < 3; index++, latency++) {
+ int value;
+ if ((latency < 2) || (latency > 4) ||
+ (!(latencies & (1 << latency)))) {
+ continue;
+ }
+ value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]);
+ if (value < 0) {
+ continue;
+ }
+
+ /* Only increase the latency if we decreas the clock */
+ if ((value >= min_cycle_time) && (value < new_cycle_time)) {
+ new_cycle_time = value;
+ new_latency = latency;
+ }
+ }
+ if (new_latency > 4){
+ continue;
+ }
+ /* Does min_latency need to be increased? */
+ if (new_cycle_time > min_cycle_time) {
+ min_cycle_time = new_cycle_time;
+ }
+ /* Does min_cycle_time need to be increased? */
+ if (new_latency > min_latency) {
+ min_latency = new_latency;
+ }
+#if 0
+ print_debug("i: ");
+ print_debug_hex8(i);
+ print_debug(" min_cycle_time: ");
+ print_debug_hex8(min_cycle_time);
+ print_debug(" min_latency: ");
+ print_debug_hex8(min_latency);
+ print_debug("\r\n");
+#endif
+ }
+ /* Make a second pass through the dimms and disable
+ * any that cannot support the selected memclk and cas latency.
+ */
+
+ for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
+ int latencies;
+ int latency;
+ int index;
+ int value;
+ int dimm;
+ latencies = spd_read_byte(ctrl->channel0[i], 18);
+ if (latencies <= 0) {
+ goto dimm_err;
+ }
+
+ /* Compute the lowest cas latency supported */
+ latency = log2(latencies) -2;
+
+ /* Walk through searching for the selected latency */
+ for(index = 0; index < 3; index++, latency++) {
+ if (!(latencies & (1 << latency))) {
+ continue;
+ }
+ if (latency == min_latency)
+ break;
+ }
+ /* If I can't find the latency or my index is bad error */
+ if ((latency != min_latency) || (index >= 3)) {
+ goto dimm_err;
+ }
+
+ /* Read the min_cycle_time for this latency */
+ value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]);
+
+ /* All is good if the selected clock speed
+ * is what I need or slower.
+ */
+ if (value <= min_cycle_time) {
+ continue;
+ }
+ /* Otherwise I have an error, disable the dimm */
+ dimm_err:
+ disable_dimm(ctrl, i);
+ }
+#if 0
+ print_debug("min_cycle_time: ");
+ print_debug_hex8(min_cycle_time);
+ print_debug(" min_latency: ");
+ print_debug_hex8(min_latency);
+ print_debug("\r\n");
+#endif
+ /* Now that I know the minimum cycle time lookup the memory parameters */
+ param = get_mem_param(min_cycle_time);
+
+ /* Update DRAM Config High with our selected memory speed */
+ value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
+ value &= ~(DCH_MEMCLK_MASK << DCH_MEMCLK_SHIFT);
+ value |= param->dch_memclk;
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, value);
+
+ static const unsigned latencies[] = { DTL_CL_2, DTL_CL_2_5, DTL_CL_3 };
+ /* Update DRAM Timing Low with our selected cas latency */
+ value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ value &= ~(DTL_TCL_MASK << DTL_TCL_SHIFT);
+ value |= latencies[min_latency - 2] << DTL_TCL_SHIFT;
+ pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, value);
+
+ return param;
+}
+
+
+static int update_dimm_Trc(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ unsigned clocks, old_clocks;
+ uint32_t dtl;
+ int value;
+ value = spd_read_byte(ctrl->channel0[i], 41);
+ if (value < 0) return -1;
+ if ((value == 0) || (value == 0xff)) {
+ value = param->tRC;
+ }
+ clocks = ((value << 1) + param->divisor - 1)/param->divisor;
+ if (clocks < DTL_TRC_MIN) {
+ clocks = DTL_TRC_MIN;
+ }
+ if (clocks > DTL_TRC_MAX) {
+ return -1;
+ }
+
+ dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ old_clocks = ((dtl >> DTL_TRC_SHIFT) & DTL_TRC_MASK) + DTL_TRC_BASE;
+ if (old_clocks > clocks) {
+ clocks = old_clocks;
+ }
+ dtl &= ~(DTL_TRC_MASK << DTL_TRC_SHIFT);
+ dtl |= ((clocks - DTL_TRC_BASE) << DTL_TRC_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
+ return 0;
+}
+
+static int update_dimm_Trfc(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ unsigned clocks, old_clocks;
+ uint32_t dtl;
+ int value;
+ value = spd_read_byte(ctrl->channel0[i], 42);
+ if (value < 0) return -1;
+ if ((value == 0) || (value == 0xff)) {
+ value = param->tRFC;
+ }
+ clocks = ((value << 1) + param->divisor - 1)/param->divisor;
+ if (clocks < DTL_TRFC_MIN) {
+ clocks = DTL_TRFC_MIN;
+ }
+ if (clocks > DTL_TRFC_MAX) {
+ return -1;
+ }
+ dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ old_clocks = ((dtl >> DTL_TRFC_SHIFT) & DTL_TRFC_MASK) + DTL_TRFC_BASE;
+ if (old_clocks > clocks) {
+ clocks = old_clocks;
+ }
+ dtl &= ~(DTL_TRFC_MASK << DTL_TRFC_SHIFT);
+ dtl |= ((clocks - DTL_TRFC_BASE) << DTL_TRFC_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
+ return 0;
+}
+
+
+static int update_dimm_Trcd(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ unsigned clocks, old_clocks;
+ uint32_t dtl;
+ int value;
+ value = spd_read_byte(ctrl->channel0[i], 29);
+ if (value < 0) return -1;
+#if 0
+ clocks = (value + (param->divisor << 1) -1)/(param->divisor << 1);
+#else
+ clocks = (value + ((param->divisor & 0xff) << 1) -1)/((param->divisor & 0xff) << 1);
+#endif
+ if (clocks < DTL_TRCD_MIN) {
+ clocks = DTL_TRCD_MIN;
+ }
+ if (clocks > DTL_TRCD_MAX) {
+ return -1;
+ }
+ dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ old_clocks = ((dtl >> DTL_TRCD_SHIFT) & DTL_TRCD_MASK) + DTL_TRCD_BASE;
+ if (old_clocks > clocks) {
+ clocks = old_clocks;
+ }
+ dtl &= ~(DTL_TRCD_MASK << DTL_TRCD_SHIFT);
+ dtl |= ((clocks - DTL_TRCD_BASE) << DTL_TRCD_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
+ return 0;
+}
+
+static int update_dimm_Trrd(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ unsigned clocks, old_clocks;
+ uint32_t dtl;
+ int value;
+ value = spd_read_byte(ctrl->channel0[i], 28);
+ if (value < 0) return -1;
+ clocks = (value + ((param->divisor & 0xff) << 1) -1)/((param->divisor & 0xff) << 1);
+ if (clocks < DTL_TRRD_MIN) {
+ clocks = DTL_TRRD_MIN;
+ }
+ if (clocks > DTL_TRRD_MAX) {
+ return -1;
+ }
+ dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ old_clocks = ((dtl >> DTL_TRRD_SHIFT) & DTL_TRRD_MASK) + DTL_TRRD_BASE;
+ if (old_clocks > clocks) {
+ clocks = old_clocks;
+ }
+ dtl &= ~(DTL_TRRD_MASK << DTL_TRRD_SHIFT);
+ dtl |= ((clocks - DTL_TRRD_BASE) << DTL_TRRD_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
+ return 0;
+}
+
+static int update_dimm_Tras(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ unsigned clocks, old_clocks;
+ uint32_t dtl;
+ int value;
+ value = spd_read_byte(ctrl->channel0[i], 30);
+ if (value < 0) return -1;
+ clocks = ((value << 1) + param->divisor - 1)/param->divisor;
+ if (clocks < DTL_TRAS_MIN) {
+ clocks = DTL_TRAS_MIN;
+ }
+ if (clocks > DTL_TRAS_MAX) {
+ return -1;
+ }
+ dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ old_clocks = ((dtl >> DTL_TRAS_SHIFT) & DTL_TRAS_MASK) + DTL_TRAS_BASE;
+ if (old_clocks > clocks) {
+ clocks = old_clocks;
+ }
+ dtl &= ~(DTL_TRAS_MASK << DTL_TRAS_SHIFT);
+ dtl |= ((clocks - DTL_TRAS_BASE) << DTL_TRAS_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
+ return 0;
+}
+
+static int update_dimm_Trp(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ unsigned clocks, old_clocks;
+ uint32_t dtl;
+ int value;
+ value = spd_read_byte(ctrl->channel0[i], 27);
+ if (value < 0) return -1;
+#if 0
+ clocks = (value + (param->divisor << 1) - 1)/(param->divisor << 1);
+#else
+ clocks = (value + ((param->divisor & 0xff) << 1) - 1)/((param->divisor & 0xff) << 1);
+#endif
+#if 0
+ print_debug("Trp: ");
+ print_debug_hex8(clocks);
+ print_debug(" spd value: ");
+ print_debug_hex8(value);
+ print_debug(" divisor: ");
+ print_debug_hex8(param->divisor);
+ print_debug("\r\n");
+#endif
+ if (clocks < DTL_TRP_MIN) {
+ clocks = DTL_TRP_MIN;
+ }
+ if (clocks > DTL_TRP_MAX) {
+ return -1;
+ }
+ dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ old_clocks = ((dtl >> DTL_TRP_SHIFT) & DTL_TRP_MASK) + DTL_TRP_BASE;
+ if (old_clocks > clocks) {
+ clocks = old_clocks;
+ }
+ dtl &= ~(DTL_TRP_MASK << DTL_TRP_SHIFT);
+ dtl |= ((clocks - DTL_TRP_BASE) << DTL_TRP_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
+ return 0;
+}
+
+static void set_Twr(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ uint32_t dtl;
+ dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ dtl &= ~(DTL_TWR_MASK << DTL_TWR_SHIFT);
+ dtl |= (param->dtl_twr - DTL_TWR_BASE) << DTL_TWR_SHIFT;
+ pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
+}
+
+
+static void init_Tref(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ uint32_t dth;
+ dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
+ dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT);
+ dth |= (param->dch_tref4k << DTH_TREF_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
+}
+
+static int update_dimm_Tref(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ uint32_t dth;
+ int value;
+ unsigned tref, old_tref;
+ value = spd_read_byte(ctrl->channel0[i], 3);
+ if (value < 0) return -1;
+ value &= 0xf;
+
+ tref = param->dch_tref8k;
+ if (value == 12) {
+ tref = param->dch_tref4k;
+ }
+
+ dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
+ old_tref = (dth >> DTH_TREF_SHIFT) & DTH_TREF_MASK;
+ if ((value == 12) && (old_tref == param->dch_tref4k)) {
+ tref = param->dch_tref4k;
+ } else {
+ tref = param->dch_tref8k;
+ }
+ dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT);
+ dth |= (tref << DTH_TREF_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
+ return 0;
+}
+
+
+static int update_dimm_x4(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ uint32_t dcl;
+ int value;
+ int dimm;
+ value = spd_read_byte(ctrl->channel0[i], 13);
+ if (value < 0) {
+ return -1;
+ }
+ dimm = i;
+ dimm += DCL_x4DIMM_SHIFT;
+ dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
+ dcl &= ~(1 << dimm);
+ if (value == 4) {
+ dcl |= (1 << dimm);
+ }
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
+ return 0;
+}
+
+static int update_dimm_ecc(const struct mem_controller *ctrl, const struct mem_param *param, int i)
+{
+ uint32_t dcl;
+ int value;
+ value = spd_read_byte(ctrl->channel0[i], 11);
+ if (value < 0) {
+ return -1;
+ }
+ if (value != 2) {
+ dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
+ dcl &= ~DCL_DimmEccEn;
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
+ }
+ return 0;
+}
+
+static int count_dimms(const struct mem_controller *ctrl)
+{
+ int dimms;
+ unsigned index;
+ dimms = 0;
+ for(index = 0; index < 8; index += 2) {
+ uint32_t csbase;
+ csbase = pci_read_config32(ctrl->f2, (DRAM_CSBASE + index << 2));
+ if (csbase & 1) {
+ dimms += 1;
+ }
+ }
+ return dimms;
+}
+
+static void set_Twtr(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ uint32_t dth;
+ unsigned clocks;
+ clocks = 1; /* AMD says hard code this */
+ dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
+ dth &= ~(DTH_TWTR_MASK << DTH_TWTR_SHIFT);
+ dth |= ((clocks - DTH_TWTR_BASE) << DTH_TWTR_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
+}
+
+static void set_Trwt(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ uint32_t dth, dtl;
+ unsigned divisor;
+ unsigned latency;
+ unsigned clocks;
+
+ clocks = 0;
+ dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
+ latency = (dtl >> DTL_TCL_SHIFT) & DTL_TCL_MASK;
+ divisor = param->divisor;
+
+ if (is_opteron(ctrl)) {
+ if (latency == DTL_CL_2) {
+ if (divisor == ((6 << 0) + 0)) {
+ /* 166Mhz */
+ clocks = 3;
+ }
+ else if (divisor > ((6 << 0)+0)) {
+ /* 100Mhz && 133Mhz */
+ clocks = 2;
+ }
+ }
+ else if (latency == DTL_CL_2_5) {
+ clocks = 3;
+ }
+ else if (latency == DTL_CL_3) {
+ if (divisor == ((6 << 0)+0)) {
+ /* 166Mhz */
+ clocks = 4;
+ }
+ else if (divisor > ((6 << 0)+0)) {
+ /* 100Mhz && 133Mhz */
+ clocks = 3;
+ }
+ }
+ }
+ else /* Athlon64 */ {
+ if (is_registered(ctrl)) {
+ if (latency == DTL_CL_2) {
+ clocks = 2;
+ }
+ else if (latency == DTL_CL_2_5) {
+ clocks = 3;
+ }
+ else if (latency == DTL_CL_3) {
+ clocks = 3;
+ }
+ }
+ else /* Unbuffered */{
+ if (latency == DTL_CL_2) {
+ clocks = 3;
+ }
+ else if (latency == DTL_CL_2_5) {
+ clocks = 4;
+ }
+ else if (latency == DTL_CL_3) {
+ clocks = 4;
+ }
+ }
+ }
+ if ((clocks < DTH_TRWT_MIN) || (clocks > DTH_TRWT_MAX)) {
+ die("Unknown Trwt");
+ }
+
+ dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
+ dth &= ~(DTH_TRWT_MASK << DTH_TRWT_SHIFT);
+ dth |= ((clocks - DTH_TRWT_BASE) << DTH_TRWT_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
+ return;
+}
+
+static void set_Twcl(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ /* Memory Clocks after CAS# */
+ uint32_t dth;
+ unsigned clocks;
+ if (is_registered(ctrl)) {
+ clocks = 2;
+ } else {
+ clocks = 1;
+ }
+ dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
+ dth &= ~(DTH_TWCL_MASK << DTH_TWCL_SHIFT);
+ dth |= ((clocks - DTH_TWCL_BASE) << DTH_TWCL_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
+}
+
+
+static void set_read_preamble(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ uint32_t dch;
+ unsigned divisor;
+ unsigned rdpreamble;
+ divisor = param->divisor;
+ dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
+ dch &= ~(DCH_RDPREAMBLE_MASK << DCH_RDPREAMBLE_SHIFT);
+ rdpreamble = 0;
+ if (is_registered(ctrl)) {
+ if (divisor == ((10 << 1)+0)) {
+ /* 100Mhz, 9ns */
+ rdpreamble = ((9 << 1)+ 0);
+ }
+ else if (divisor == ((7 << 1)+1)) {
+ /* 133Mhz, 8ns */
+ rdpreamble = ((8 << 1)+0);
+ }
+ else if (divisor == ((6 << 1)+0)) {
+ /* 166Mhz, 7.5ns */
+ rdpreamble = ((7 << 1)+1);
+ }
+ }
+ else {
+ int slots;
+ int i;
+ slots = 0;
+ for(i = 0; i < 4; i++) {
+ if (ctrl->channel0[i]) {
+ slots += 1;
+ }
+ }
+ if (divisor == ((10 << 1)+0)) {
+ /* 100Mhz */
+ if (slots <= 2) {
+ /* 9ns */
+ rdpreamble = ((9 << 1)+0);
+ } else {
+ /* 14ns */
+ rdpreamble = ((14 << 1)+0);
+ }
+ }
+ else if (divisor == ((7 << 1)+1)) {
+ /* 133Mhz */
+ if (slots <= 2) {
+ /* 7ns */
+ rdpreamble = ((7 << 1)+0);
+ } else {
+ /* 11 ns */
+ rdpreamble = ((11 << 1)+0);
+ }
+ }
+ else if (divisor == ((6 << 1)+0)) {
+ /* 166Mhz */
+ if (slots <= 2) {
+ /* 6ns */
+ rdpreamble = ((7 << 1)+0);
+ } else {
+ /* 9ns */
+ rdpreamble = ((9 << 1)+0);
+ }
+ }
+ else if (divisor == ((5 << 1)+0)) {
+ /* 200Mhz */
+ if (slots <= 2) {
+ /* 5ns */
+ rdpreamble = ((5 << 1)+0);
+ } else {
+ /* 7ns */
+ rdpreamble = ((7 << 1)+0);
+ }
+ }
+ }
+ if ((rdpreamble < DCH_RDPREAMBLE_MIN) || (rdpreamble > DCH_RDPREAMBLE_MAX)) {
+ die("Unknown rdpreamble");
+ }
+ dch |= (rdpreamble - DCH_RDPREAMBLE_BASE) << DCH_RDPREAMBLE_SHIFT;
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
+}
+
+static void set_max_async_latency(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ uint32_t dch;
+ int i;
+ unsigned async_lat;
+ int dimms;
+
+ dimms = count_dimms(ctrl);
+
+ dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
+ dch &= ~(DCH_ASYNC_LAT_MASK << DCH_ASYNC_LAT_SHIFT);
+ async_lat = 0;
+ if (is_registered(ctrl)) {
+ if (dimms == 4) {
+ /* 9ns */
+ async_lat = 9;
+ }
+ else {
+ /* 8ns */
+ async_lat = 8;
+ }
+ }
+ else {
+ if (dimms > 3) {
+ die("Too many unbuffered dimms");
+ }
+ else if (dimms == 3) {
+ /* 7ns */
+ async_lat = 7;
+ }
+ else {
+ /* 6ns */
+ async_lat = 6;
+ }
+ }
+ dch |= ((async_lat - DCH_ASYNC_LAT_BASE) << DCH_ASYNC_LAT_SHIFT);
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
+}
+
+static void set_idle_cycle_limit(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ uint32_t dch;
+ /* AMD says to Hardcode this */
+ dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
+ dch &= ~(DCH_IDLE_LIMIT_MASK << DCH_IDLE_LIMIT_SHIFT);
+ dch |= DCH_IDLE_LIMIT_16 << DCH_IDLE_LIMIT_SHIFT;
+ dch |= DCH_DYN_IDLE_CTR_EN;
+ pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
+}
+
+static void spd_set_dram_timing(const struct mem_controller *ctrl, const struct mem_param *param)
+{
+ int dimms;
+ int i;
+ init_Tref(ctrl, param);
+ for(i = 0; (i < 4) && ctrl->channel0[i]; i++) {
+ int rc;
+ /* DRAM Timing Low Register */
+ if (update_dimm_Trc (ctrl, param, i) < 0) goto dimm_err;
+ if (update_dimm_Trfc(ctrl, param, i) < 0) goto dimm_err;
+ if (update_dimm_Trcd(ctrl, param, i) < 0) goto dimm_err;
+ if (update_dimm_Trrd(ctrl, param, i) < 0) goto dimm_err;
+ if (update_dimm_Tras(ctrl, param, i) < 0) goto dimm_err;
+ if (update_dimm_Trp (ctrl, param, i) < 0) goto dimm_err;
+
+ /* DRAM Timing High Register */
+ if (update_dimm_Tref(ctrl, param, i) < 0) goto dimm_err;
+
+ /* DRAM Config Low */
+ if (update_dimm_x4 (ctrl, param, i) < 0) goto dimm_err;
+ if (update_dimm_ecc(ctrl, param, i) < 0) goto dimm_err;
+ continue;
+ dimm_err:
+ disable_dimm(ctrl, i);
+
+ }
+ /* DRAM Timing Low Register */
+ set_Twr(ctrl, param);
+
+ /* DRAM Timing High Register */
+ set_Twtr(ctrl, param);
+ set_Trwt(ctrl, param);
+ set_Twcl(ctrl, param);
+
+ /* DRAM Config High */
+ set_read_preamble(ctrl, param);
+ set_max_async_latency(ctrl, param);
+ set_idle_cycle_limit(ctrl, param);
+}
+
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+{
+ const struct mem_param *param;
+ spd_enable_2channels(ctrl);
+ spd_set_ram_size(ctrl);
+ spd_handle_unbuffered_dimms(ctrl);
+ param = spd_set_memclk(ctrl);
+ spd_set_dram_timing(ctrl, param);
+ order_dimms(ctrl);
+}
+
+#define TIMEOUT_LOOPS 300000
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+{
+ int i;
+
+ /* Before enabling memory start the memory clocks */
+ for(i = 0; i < controllers; i++) {
+ uint32_t dch;
+ dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH);
+ dch |= DCH_MEMCLK_VALID;
+ pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch);
+ }
+
+ /* And if necessary toggle the the reset on the dimms by hand */
+ memreset(controllers, ctrl);
+
+ for(i = 0; i < controllers; i++) {
+ uint32_t dcl;
+ /* Toggle DisDqsHys to get it working */
+ dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
+#if 0
+ print_debug("dcl: ");
+ print_debug_hex32(dcl);
+ print_debug("\r\n");
+#endif
+#warning "FIXME set the ECC type to perform"
+#warning "FIXME initialize the scrub registers"
+#if 1
+ if (dcl & DCL_DimmEccEn) {
+ print_debug("ECC enabled\r\n");
+ }
+#endif
+ dcl |= DCL_DisDqsHys;
+ pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl);
+ dcl &= ~DCL_DisDqsHys;
+ dcl &= ~DCL_DLL_Disable;
+ dcl &= ~DCL_D_DRV;
+ dcl &= ~DCL_QFC_EN;
+ dcl |= DCL_DramInit;
+ pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl);
+
+ }
+ for(i = 0; i < controllers; i++) {
+ uint32_t dcl;
+ print_debug("Initializing memory: ");
+ int loops = 0;
+ do {
+ dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
+ loops += 1;
+ if ((loops & 1023) == 0) {
+ print_debug(".");
+ }
+ } while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS));
+ if (loops >= TIMEOUT_LOOPS) {
+ print_debug(" failed\r\n");
+ } else {
+ print_debug(" done\r\n");
+ }
+#if 0
+ if (dcl & DCL_DimmEccEn) {
+ print_debug("Clearing memory: ");
+ loops = 0;
+ dcl &= ~DCL_MemClrStatus;
+ pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl);
+
+ do {
+ dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
+ loops += 1;
+ if ((loops & 1023) == 0) {
+ print_debug(" ");
+ print_debug_hex32(loops);
+ }
+ } while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS));
+ if (loops >= TIMEOUT_LOOPS) {
+ print_debug("failed\r\n");
+ } else {
+ print_debug("done\r\n");
+ }
+ pci_write_config32(ctrl[i].f3, SCRUB_ADDR_LOW, 0);
+ pci_write_config32(ctrl[i].f3, SCRUB_ADDR_HIGH, 0);
+ }
+#endif
+ }
+}
diff --git a/src/northbridge/via/vt8601/raminit.h b/src/northbridge/via/vt8601/raminit.h
new file mode 100644
index 0000000000..4d3cdc16ce
--- /dev/null
+++ b/src/northbridge/via/vt8601/raminit.h
@@ -0,0 +1,4 @@
+#ifndef RAMINIT_H
+#define RAMINIT_H
+
+#endif /* RAMINIT_H */