diff options
| -rw-r--r-- | src/mainboard/google/hatch/variants/duffy/overridetree.cb | 14 | ||||
| -rw-r--r-- | src/mainboard/google/hatch/variants/kaisa/overridetree.cb | 14 |
2 files changed, 14 insertions, 14 deletions
diff --git a/src/mainboard/google/hatch/variants/duffy/overridetree.cb b/src/mainboard/google/hatch/variants/duffy/overridetree.cb index 2f36bc8b62..ade12c5806 100644 --- a/src/mainboard/google/hatch/variants/duffy/overridetree.cb +++ b/src/mainboard/google/hatch/variants/duffy/overridetree.cb @@ -22,23 +22,23 @@ chip soc/intel/cannonlake # USB configuration register "usb2_ports[0]" = "USB2_PORT_MID(OC2)" # Type-A Port 2 - register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port - register "usb2_ports[2]" = "{ + register "usb2_ports[1]" = "{ .enable = 1, - .ocpin = OC3, + .ocpin = OC1, .tx_bias = USB2_BIAS_0MV, .tx_emp_enable = USB2_PRE_EMP_ON, .pre_emp_bias = USB2_BIAS_28P15MV, .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, - }" # Type-A Port 3 - register "usb2_ports[3]" = "{ + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ .enable = 1, - .ocpin = OC1, + .ocpin = OC3, .tx_bias = USB2_BIAS_0MV, .tx_emp_enable = USB2_PRE_EMP_ON, .pre_emp_bias = USB2_BIAS_28P15MV, .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, - }" # Type-A Port 1 + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port register "usb2_ports[4]" = "{ .enable = 1, .ocpin = OC_SKIP, diff --git a/src/mainboard/google/hatch/variants/kaisa/overridetree.cb b/src/mainboard/google/hatch/variants/kaisa/overridetree.cb index db05302278..e2380f4460 100644 --- a/src/mainboard/google/hatch/variants/kaisa/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kaisa/overridetree.cb @@ -22,23 +22,23 @@ chip soc/intel/cannonlake # USB configuration register "usb2_ports[0]" = "USB2_PORT_MID(OC2)" # Type-A Port 2 - register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port - register "usb2_ports[2]" = "{ + register "usb2_ports[1]" = "{ .enable = 1, - .ocpin = OC3, + .ocpin = OC1, .tx_bias = USB2_BIAS_0MV, .tx_emp_enable = USB2_PRE_EMP_ON, .pre_emp_bias = USB2_BIAS_28P15MV, .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, - }" # Type-A Port 3 - register "usb2_ports[3]" = "{ + }" # Type-A Port 1 + register "usb2_ports[2]" = "{ .enable = 1, - .ocpin = OC1, + .ocpin = OC3, .tx_bias = USB2_BIAS_0MV, .tx_emp_enable = USB2_PRE_EMP_ON, .pre_emp_bias = USB2_BIAS_28P15MV, .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, - }" # Type-A Port 1 + }" # Type-A Port 3 + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port register "usb2_ports[4]" = "{ .enable = 1, .ocpin = OC_SKIP, |