diff options
64 files changed, 2 insertions, 18506 deletions
diff --git a/documentation/CorebootBuildingGuide.tex b/documentation/CorebootBuildingGuide.tex index 5847daba78..5b3eacf778 100644 --- a/documentation/CorebootBuildingGuide.tex +++ b/documentation/CorebootBuildingGuide.tex @@ -1353,21 +1353,8 @@ utilities suite. Get it at \subsection {Booting Payloads} coreboot can load a payload binary from a Flash device or IDE. This payload can be a boot loader, like FILO or Etherboot, a kernel image, or -any other static ELF binary. - -To create a Linux kernel image, that is bootable in coreboot, you have -to use mkelfImage. The command line I used, looks like follows: - -\begin{verbatim} - objdir/sbin/mkelfImage t bzImagei386 kernel /boot/vmlinuz \ - commandline="console=ttyS0,115200 root=/dev/hda3" \ - initrd=/boot/initrd output vmlinuz.elf -\end{verbatim} - - -This will create the file \texttt{vmlinuz.elf} from a distribution -kernel, console redirected to the serial port and using an initial -ramdisk. +any other static ELF binary. If you specify a bzImage as the payload, +the cbfs utility will figure out how to create a coreboot payload from it. \subsection{Kernel on dhcp/tftp} diff --git a/util/mkelfImage/AUTHORS b/util/mkelfImage/AUTHORS deleted file mode 100644 index 08224f6aa0..0000000000 --- a/util/mkelfImage/AUTHORS +++ /dev/null @@ -1,4 +0,0 @@ -Eric Biederman <ebiederman@lnxi.com> -Joshua Aune <luken@lnxi.com> -Jake Page <jake@CS.Stanford.EDU> -Andrew Ip <aip@cwlinux.com> diff --git a/util/mkelfImage/COPYING b/util/mkelfImage/COPYING deleted file mode 100644 index 0d1ceba6ee..0000000000 --- a/util/mkelfImage/COPYING +++ /dev/null @@ -1,341 +0,0 @@ - - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) 19yy <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) 19yy name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/util/mkelfImage/Makefile b/util/mkelfImage/Makefile deleted file mode 100644 index e930d6abad..0000000000 --- a/util/mkelfImage/Makefile +++ /dev/null @@ -1,114 +0,0 @@ -include Makefile.conf -VERSION:=2.7 -RELEASE_DATE:=27 March 2006 -PACKAGE:=mkelfImage - -# You can specify DESTDIR on the command line to do a add -# a prefix to the install so it doesn't really happen -# Useful for building binary packages -DESTDIR = -CWD:=$(shell pwd) -OBJDIR:=objdir - -CPPFLAGS=-DVERSION='"$(VERSION)"' -DRELEASE_DATE='"$(RELEASE_DATE)"' -I include -HOST_CPPFLAGS=$(CPPFLAGS) -I386_CPPFLAGS=$(CPPFLAGS) -I arch/i386/include -IA64_CPPFLAGS=$(CPPFLAGS) -I arch/ia64/include - -GENERATED_SRCS:=\ - ./configure \ - ./linux-i386/convert.bin.c\ - ./linux-ia64/convert.bin.c - -SPEC=$(OBJDIR)/mkelfImage-$(VERSION).spec -TARBALL=$(OBJDIR)/mkelfImage-$(VERSION).tar.gz -SRCS:=$(shell find ./AUTHORS ./COPYING ./Makefile ./Makefile.conf.in ./News \ - ./configure.ac \ - ./mkelfImage.spec.in \ - ./config \ - ./kunzip_src \ - ./main ./util ./include ./arch \ - ./linux-i386 \ - ./linux-ia64 \ - ! -path '*CVS*' ! -name '*~' ! -name '.*' -type f -print ) -SRCS+=$(GENERATED_SRCS) -PSRCS:=$(patsubst ./%,mkelfImage-$(VERSION)/%,$(SRCS)) -PSRCS+=./mkelfImage-$(VERSION).spec - -SBIN_TARGETS=$(OBJDIR)/sbin/mkelfImage -MAN8_TARGETS=$(OBJDIR)/man/man8/mkelfImage.8 - -TARGETS:=$(SBIN_TARGETS) $(MAN8_TARGETS) - -DEPS:= Makefile Makefile.conf -all: $(TARGETS) - -include main/Makefile -include util/Makefile -include linux-i386/Makefile -include linux-ia64/Makefile - - -clean:: - @$(RM) -rf objdir - @$(RM) -rf rpm - @$(RM) -f config.log config.status config.cache - @$(RM) -f $(SBIN_TARGETS) $(MAN1_TARGETS) - @$(RM) -f mkelfImage-$(VERSION) $(TARBALL) - -dist-clean:: clean - @$(FIND) . -type f -name '*~' | xargs $(RM) -f - @$(RM) Makefile.conf - -maintainer-clean:: dist-clean - @$(RM) -f $(SPEC) $(GENERATED_SRCS) - - -install: $(TARGETS) - $(MKDIR) -p $(DESTDIR)/$(sbindir) $(DESTDIR)/$(mandir)/man8 - $(CP) -ar $(SBIN_TARGETS) $(DESTDIR)/$(sbindir)/ - $(CP) -ar $(MAN8_TARGETS) $(DESTDIR)/$(mandir)/man8/ - - -#%.1 : %.pl Makefile -# mkdir -p $(@D) -# pod2man --date="$(RELEASE_DATE)" --release="$(VERSION)" $*.pl > $@ - - -tarball: $(TARBALL) - - -$(TARBALL): $(SRCS) $(SPEC) - $(MKDIR) -p $(OBJDIR) - $(RM) -f $(OBJDIR)/mkelfImage-$(VERSION) - $(LN) -s .. $(OBJDIR)/mkelfImage-$(VERSION) - (cd $(OBJDIR); $(TAR) -cf - $(PSRCS) | gzip -9) > $@ - -rpm: $(TARBALL) - $(MKDIR) -p $(OBJDIR)/RPM $(OBJDIR)/SRPM $(OBJDIR)/BUILD $(OBJDIR)/SPECS $(OBJDIR)/TMP - unset MAKEFLAGS MAKELEVEL; \ - $(RPM) -ta \ - --define '_rpmdir $(CWD)/$(OBJDIR)/RPM' \ - --define '_srcrpmdir $(CWD)/$(OBJDIR)/SRPM' \ - --define '_builddir $(CWD)/$(OBJDIR)/BUILD' \ - --define '_specdir $(CWD)/$(OBJDIR)/SPECS' \ - --define '_tmppath $(CWD)/$(OBJDIR)/TMP' \ - $(TARBALL) - -Makefile.conf: Makefile.conf.in configure - /bin/sh ./configure - - -configure: configure.ac - autoconf - $(RM) -rf autom4te.cache - -$(SPEC): mkelfImage.spec.in Makefile - $(SED) -e 's,^Version: $$,Version: $(VERSION),' $< > $@ - - -.PHONY: echo install realinstall - - -echo: - echo $(SRCS) diff --git a/util/mkelfImage/Makefile.conf.in b/util/mkelfImage/Makefile.conf.in deleted file mode 100644 index 4645e44a36..0000000000 --- a/util/mkelfImage/Makefile.conf.in +++ /dev/null @@ -1,46 +0,0 @@ -prefix=@prefix@ -exec_prefix=@exec_prefix@ - -bindir=@bindir@ -sbindir=@sbindir@ -libexecdir=@libexecdir@ -datadir=@datadir@ -sysconfdir=@sysconfdir@ -sharedstatedir=@sharedstatedir@ -localstatedir=@localstatedir@ -libdir=@libdir@ -infodir=@infodir@ -mandir=@mandir@ -includedir=@includedir@ - -DEFS=@DEFS@ -LIBS=@LIBS@ -HOST_CC=@HOST_CC@ -HOST_CFLAGS=@HOST_CFLAGS@ $(DEFS) - -I386_CC =@I386_CC@ -I386_LD =@I386_LD@ -I386_AS =@I386_AS@ -I386_CPP =@I386_CPP@ -I386_OBJCOPY=@I386_OBJCOPY@ -I386_CFLAGS =@I386_CFLAGS@ -I386_ASFLAGS=@I386_ASFLAGS@ -I386_LDFLAGS=@I386_LDFLAGS@ - -IA64_CC =@IA64_CC@ -IA64_LD =@IA64_LD@ -IA64_AS =@IA64_AS@ -IA64_CPP =@IA64_CPP@ -IA64_OBJCOPY=@IA64_OBJCOPY@ -IA64_CFLAGS =@IA64_CFLAGS@ -IA64_ASFLAGS=@IA64_ASFLAGS@ -IA64_LDFLAGS=@IA64_LDFLAGS@ - -MKDIR=@MKDIR@ -RM=@RM@ -CP=@CP@ -LN=@LN@ -TAR=@TAR@ -RPM=@RPM@ -SED=@SED@ -FIND=@FIND@ diff --git a/util/mkelfImage/News b/util/mkelfImage/News deleted file mode 100644 index c02c881d9a..0000000000 --- a/util/mkelfImage/News +++ /dev/null @@ -1,123 +0,0 @@ -* 2.6 14 March 2006 -- Fix the i386-linux probe code so it does not get confused by - bzImages that are also ELF executables. -- Changed value of GDTLOC and REAL_MODE_DATA_LOC to be below - 512kb. This allows for booting on machines whose BIOS reports - only 512kb of memory below 1MB. - -* 2.5 24 April 2003 -- Fix the checksum code so that it checksums the bss sections as well. - How I missed the checksum code was broken in 2.4 I don't know. - -* 2.4 22 April 2003 -- Fix code that failed to write more than the first ELF note. - Resulting in checksums and other information not being present - in the generated ELF image. - This bug has been present since mkelfImage-2.0 - -* 2.3 7 Febuary 2003 -- Disable debugging code on the itanium that is not always safe. - -* 2.2 6 Febuary 2003 -- Always read the correct pointer when an ELF boot header is found. -- Add a printf implementation to i386-linux/convert_param.c -- Minor man page updates. - -* 2.1 27 January 2003 -- Allow an arbitrary number of kernel headers in mkelf-linux-ia64.c -- Remove unused entries from Makefile.conf.in -- Correctly report the elf note size. -- Check for broken binutils when we run, so mkelfImage does not generate incorrect images. -- Add automatic decompress of kernel images - -* 2.0 13 January 2003 -- Convert everything to C -- Add itanium support - -* 1.19 20 December 2002 - - Update to handle a Bhdr passed via the C calling conventions. - -* 1.18 9 November 2002 - - Update to work with binutils 2.13.x - -* 1.17 17 October 2002 - - Add an rpm target - - Fix Source0 in the rpm spec file - - Linux 2.5.x support - -* 1.16 29 August 2002 - - Include the source for my spec file in the tarball. - - Fix the make install target - -* 1.15 23 August 2002 - - Rewrote the perl ip checksum code to be reasonably fast - - Fixes to the initial parameter passing in head.S thanks to Jake Page <jake@CS.Stanford.EDU> - - Initial cross compiling support thanks to Jake Page <jake@CS.Stanford.EDU> - - Official specfile thanks to Andrew Ip <aip@cwlinux.com> - - Autoconf support Josh Aune <lunke@linuxnetworx.com> - -* 1.14 28 June 2002 - - Use much less complex ld magic (removed the use of PHDRS directive) - - Fix a small bug in the LinuxBIOS checksum verification code (only affected odd length tables) - -* 1.13 10 May 2002 - Include the version number in mkelfImage. - -* 1.12 26 January 2002 - Better firmware detection, and stripping excess symbols from the - generated object. - -* 1.11 24 January 2002 - Bug fix to command line processing. - -* 1.10 21 January 2002 - Starting using the PHDRS directive which many versions of ld cannot - handle correctly. The symptom is generally a file that is 9MB in - size. - - Start computing a checksum on the Image. - - Include an ELF note section in the image for out of band - information (checksum, program name, etc). - -* 1.9 7 January 2002 - I changed LinuxBIOS (in LinuxBIOS) from passing it's information - locally, to passing it in a global table that is always present. - So that whoever needs that information can get it unfiltered. And - because it isn't being passed around it has less chance of - becomming corrupt. Globals for global information are good :) - Version 1.9 goes out and finds that table. - -* 1.8 10 December 2001 - Move the ramdisk up even higher in memory. - Better debugging of multiboot parameters - Pass the correct values for a vga screen instead of telling the - kernel we have EGA... - -* 1.7 18 May 2001 - Warn when I don't have information about the bootloader. - Include a ELF compreressor that works on alpha && x86 - There is no good way to apply it though. - -* 1.6 1 Febuary 2001 - Code cleanup in bzImage support. - -* 1.5 1 Febuary 2001 - Add support for bzImage - -* 1.4 ??? - ??? - -* 1.3 27 December 2000 - Minor bug fixes for working with the e820 memory map. - -* 1.2 18 December 2000 - Work around for some versions of ld not treating /dev/null and an - empty file the same - -* 1.1 30 November 2000 - Fix for ramdisks and large amounts of memory with 2.2 series - kernels. - -* 1.0 7 November 2000 - Initial release (supports vmlinux && bvmlinux) diff --git a/util/mkelfImage/arch/i386/include/arch/io.h b/util/mkelfImage/arch/i386/include/arch/io.h deleted file mode 100644 index 2ebe5dd9c6..0000000000 --- a/util/mkelfImage/arch/i386/include/arch/io.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef ARCH_IO_H -#define ARCH_IO_H - -#include <stdint.h> -/* Helper functions for directly doing I/O */ - -extern inline uint8_t inb(uint16_t port) -{ - uint8_t result; - - __asm__ __volatile__ ( - "inb %w1,%0" - :"=a" (result) - :"Nd" (port)); - return result; -} - -extern inline uint16_t inw(uint16_t port) -{ - uint16_t result; - - __asm__ __volatile__ ( - "inw %w1,%0" - :"=a" (result) - :"Nd" (port)); - return result; -} - -extern inline uint32_t inl(uint32_t port) -{ - uint32_t result; - - __asm__ __volatile__ ( - "inl %w1,%0" - :"=a" (result) - :"Nd" (port)); - return result; -} - -extern inline void outb (uint8_t value, uint16_t port) -{ - __asm__ __volatile__ ( - "outb %b0,%w1" - : - :"a" (value), "Nd" (port)); -} - -extern inline void outw (uint16_t value, uint16_t port) -{ - __asm__ __volatile__ ( - "outw %w0,%w1" - : - :"a" (value), "Nd" (port)); -} - -extern inline void outl (uint32_t value, uint16_t port) -{ - __asm__ __volatile__ ( - "outl %0,%w1" - : - :"a" (value), "Nd" (port)); -} - -#endif /* ARCH_IO_H */ diff --git a/util/mkelfImage/arch/i386/include/limits.h b/util/mkelfImage/arch/i386/include/limits.h deleted file mode 100644 index d5a5a02c6f..0000000000 --- a/util/mkelfImage/arch/i386/include/limits.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef LIMITS_H -#define LIMITS_H 1 - - -/* Number of bits in a `char' */ -#define CHAR_BIT 8 - -/* Minimum and maximum values a `signed char' can hold */ -#define SCHAR_MIN (-128) -#define SCHAR_MAX 127 - -/* Maximum value an `unsigned char' can hold. (Minimum is 0.) */ -#define UCHAR_MAX 255 - -/* Minimum and maximum values a `char' can hold */ -#define CHAR_MIN SCHAR_MIN -#define CHAR_MAX SCHAR_MAX - -/* Minimum and maximum values a `signed short int' can hold */ -#define SHRT_MIN (-32768) -#define SHRT_MAX 32767 - -/* Maximum value an `unsigned short' can hold. (Minimum is 0.) */ -#define USHRT_MAX 65535 - - -/* Minimum and maximum values a `signed int' can hold */ -#define INT_MIN (-INT_MAX - 1) -#define INT_MAX 2147483647 - -/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */ -#define UINT_MAX 4294967295U - - -/* Minimum and maximum values a `signed int' can hold */ -#define INT_MIN (-INT_MAX - 1) -#define INT_MAX 2147483647 - -/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */ -#define UINT_MAX 4294967295U - -/* Minimum and maximum values a `signed long' can hold */ -#define LONG_MAX 2147483647L -#define LONG_MIN (-LONG_MAX - 1L) - -/* Maximum value an `unsigned long' can hold. (Minimum is 0.) */ -#define ULONG_MAX 4294967295UL - -/* Minimum and maximum values a `signed long long' can hold */ -#define LLONG_MAX 9223372036854775807LL -#define LLONG_MIN (-LONG_MAX - 1LL) - - -/* Maximum value an `unsigned long long' can hold. (Minimum is 0.) */ -#define ULLONG_MAX 18446744073709551615ULL - - -#endif /* LIMITS_H */ diff --git a/util/mkelfImage/arch/i386/include/stdint.h b/util/mkelfImage/arch/i386/include/stdint.h deleted file mode 100644 index 79262c206c..0000000000 --- a/util/mkelfImage/arch/i386/include/stdint.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef STDINT_H -#define STDINT_H - -typedef unsigned long size_t; - -typedef unsigned char uint8_t; -typedef unsigned short uint16_t; -typedef unsigned int uint32_t; -typedef unsigned long long uint64_t; - -typedef signed char int8_t; -typedef signed short int16_t; -typedef signed int int32_t; -typedef signed long long int64_t; - -#endif /* STDINT_H */ diff --git a/util/mkelfImage/arch/ia64/include/limits.h b/util/mkelfImage/arch/ia64/include/limits.h deleted file mode 100644 index 0c6f21f9e0..0000000000 --- a/util/mkelfImage/arch/ia64/include/limits.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef LIMITS_H -#define LIMITS_H 1 - -/* Number of bits in a `char' */ -#define CHAR_BIT 8 - -/* Minimum and maximum values a `signed char' can hold */ -#define SCHAR_MIN (-128) -#define SCHAR_MAX 127 - -/* Maximum value an `unsigned char' can hold. (Minimum is 0.) */ -#define UCHAR_MAX 255 - -/* Minimum and maximum values a `char' can hold */ -#define CHAR_MIN SCHAR_MIN -#define CHAR_MAX SCHAR_MAX - -/* Minimum and maximum values a `signed short int' can hold */ -#define SHRT_MIN (-32768) -#define SHRT_MAX 32767 - -/* Maximum value an `unsigned short' can hold. (Minimum is 0.) */ -#define USHRT_MAX 65535 - - -/* Minimum and maximum values a `signed int' can hold */ -#define INT_MIN (-INT_MAX - 1) -#define INT_MAX 2147483647 - -/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */ -#define UINT_MAX 4294967295U - - -/* Minimum and maximum values a `signed int' can hold */ -#define INT_MIN (-INT_MAX - 1) -#define INT_MAX 2147483647 - -/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */ -#define UINT_MAX 4294967295U - -/* Minimum and maximum values a `signed long' can hold */ -#define LONG_MAX 9223372036854775807L -#define LONG_MIN (-LONG_MAX - 1L) - -/* Maximum value an `unsigned long' can hold. (Minimum is 0.) */ -#define ULONG_MAX 18446744073709551615UL - -/* Minimum and maximum values a `signed long long' can hold */ -#define LLONG_MAX 9223372036854775807LL -#define LLONG_MIN (-LONG_MAX - 1LL) - - -/* Maximum value an `unsigned long long' can hold. (Minimum is 0.) */ -#define ULLONG_MAX 18446744073709551615ULL - - -#endif /* LIMITS_H */ diff --git a/util/mkelfImage/arch/ia64/include/stdint.h b/util/mkelfImage/arch/ia64/include/stdint.h deleted file mode 100644 index 2f9c592c33..0000000000 --- a/util/mkelfImage/arch/ia64/include/stdint.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef STDINT_H -#define STDINT_H - -typedef unsigned long size_t; - -typedef unsigned char uint8_t; -typedef unsigned short uint16_t; -typedef unsigned int uint32_t; -typedef unsigned long uint64_t; - -typedef signed char int8_t; -typedef signed short int16_t; -typedef signed int int32_t; -typedef signed long int64_t; - -#endif /* STDINT_H */ diff --git a/util/mkelfImage/config/config.guess b/util/mkelfImage/config/config.guess deleted file mode 100755 index ff40ddb038..0000000000 --- a/util/mkelfImage/config/config.guess +++ /dev/null @@ -1,1321 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002 Free Software Foundation, Inc. - -timestamp='2002-03-20' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Per Bothner <per@bothner.com>. -# Please send patches to <config-patches@gnu.org>. Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <config-patches@gnu.org>." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; - --version | -v ) - echo "$version" ; exit 0 ;; - --help | --h* | -h ) - echo "$usage"; exit 0 ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - - -dummy=dummy-$$ -trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int dummy(){}" > $dummy.c ; - for c in cc gcc c89 c99 ; do - ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; - if test $? = 0 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - rm -f $dummy.c $dummy.o $dummy.rel ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - cat <<EOF >$dummy.s - .data -\$Lformat: - .byte 37,100,45,37,120,10,0 # "%d-%x\n" - - .text - .globl main - .align 4 - .ent main -main: - .frame \$30,16,\$26,0 - ldgp \$29,0(\$27) - .prologue 1 - .long 0x47e03d80 # implver \$0 - lda \$2,-1 - .long 0x47e20c21 # amask \$2,\$1 - lda \$16,\$Lformat - mov \$0,\$17 - not \$1,\$18 - jsr \$26,printf - ldgp \$29,0(\$26) - mov 0,\$16 - jsr \$26,exit - .end main -EOF - eval $set_cc_for_build - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null - if test "$?" = 0 ; then - case `./$dummy` in - 0-0) - UNAME_MACHINE="alpha" - ;; - 1-0) - UNAME_MACHINE="alphaev5" - ;; - 1-1) - UNAME_MACHINE="alphaev56" - ;; - 1-101) - UNAME_MACHINE="alphapca56" - ;; - 2-303) - UNAME_MACHINE="alphaev6" - ;; - 2-307) - UNAME_MACHINE="alphaev67" - ;; - 2-1307) - UNAME_MACHINE="alphaev68" - ;; - esac - fi - rm -f $dummy.s $dummy - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit 0 ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit 0 ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit 0;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit 0 ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit 0 ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit 0;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit 0 ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit 0 ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit 0 ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit 0 ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include <stdio.h> /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy \ - && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit 0 ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit 0 ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit 0 ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit 0 ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit 0 ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit 0 ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit 0 ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit 0 ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit 0 ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit 0 ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit 0 ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <sys/systemcfg.h> - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo rs6000-ibm-aix3.2.5 - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit 0 ;; - *:AIX:*:[45]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit 0 ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit 0 ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit 0 ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit 0 ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit 0 ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include <stdlib.h> - #include <unistd.h> - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy` - if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi - rm -f $dummy.c $dummy - fi ;; - esac - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit 0 ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <unistd.h> - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo unknown-hitachi-hiuxwe2 - exit 0 ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit 0 ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit 0 ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit 0 ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit 0 ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit 0 ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit 0 ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit 0 ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit 0 ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit 0 ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit 0 ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit 0 ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*T3D:*:*:*) - echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; - i*:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit 0 ;; - x86:Interix*:3*) - echo i386-pc-interix3 - exit 0 ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i386-pc-interix - exit 0 ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit 0 ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - *:GNU:*:*) - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit 0 ;; - arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - rm -f $dummy.c - test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0 - ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit 0 ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit 0 ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit 0 ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit 0 ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit 0 ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit 0 ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit 0 ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit 0 ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <features.h> - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #ifdef __INTEL_COMPILER - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - rm -f $dummy.c - test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 - test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit 0 ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit 0 ;; - i*86:*:5:[78]*) - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit 0 ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` - echo ${UNAME_MACHINE}-pc-isc$UNAME_REL - elif /bin/uname -X 2>/dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` - (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit 0 ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit 0 ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit 0 ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit 0 ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit 0 ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit 0 ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit 0 ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <Richard.M.Bartel@ccMail.Census.GOV> - echo i586-unisys-sysv4 - exit 0 ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes <hewes@openmarket.com>. - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit 0 ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit 0 ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit 0 ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit 0 ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit 0 ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit 0 ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit 0 ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit 0 ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Darwin:*:*) - echo `uname -p`-apple-darwin${UNAME_RELEASE} - exit 0 ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit 0 ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit 0 ;; - NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit 0 ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit 0 ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit 0 ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit 0 ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit 0 ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit 0 ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit 0 ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit 0 ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit 0 ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit 0 ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit 0 ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c <<EOF -#ifdef _SEQUENT_ -# include <sys/types.h> -# include <sys/utsname.h> -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include <sys/param.h> - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include <sys/param.h> -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 -rm -f $dummy.c $dummy - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit 0 ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - c34*) - echo c34-convex-bsd - exit 0 ;; - c38*) - echo c38-convex-bsd - exit 0 ;; - c4*) - echo c4-convex-bsd - exit 0 ;; - esac -fi - -cat >&2 <<EOF -$0: unable to guess system type - -This script, last modified $timestamp, has failed to recognize -the operating system you are using. It is advised that you -download the most up to date version of the config scripts from - - ftp://ftp.gnu.org/pub/gnu/config/ - -If the version you run ($0) is already up to date, please -send the following data and any information you think might be -pertinent to <config-patches@gnu.org> in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/util/mkelfImage/config/config.sub b/util/mkelfImage/config/config.sub deleted file mode 100755 index f3657978c7..0000000000 --- a/util/mkelfImage/config/config.sub +++ /dev/null @@ -1,1443 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002 Free Software Foundation, Inc. - -timestamp='2002-03-07' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Please send patches to <config-patches@gnu.org>. Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <config-patches@gnu.org>." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; - --version | -v ) - echo "$version" ; exit 0 ;; - --help | --h* | -h ) - echo "$usage"; exit 0 ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit 0;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ - | c4x | clipper \ - | d10v | d30v | dsp16xx \ - | fr30 \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | m32r | m68000 | m68k | m88k | mcore \ - | mips | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el | mips64vr4300 \ - | mips64vr4300el | mips64vr5000 | mips64vr5000el \ - | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ - | mipsisa32 | mipsisa64 \ - | mn10200 | mn10300 \ - | ns16k | ns32k \ - | openrisc | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | sh | sh[34] | sh[34]eb | shbe | shle | sh64 \ - | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ - | strongarm \ - | tahoe | thumb | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xscale | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armv*-* \ - | avr-* \ - | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c54x-* \ - | clipper-* | cydra-* \ - | d10v-* | d30v-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | m32r-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | mcore-* \ - | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ - | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ - | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* | sh64-* \ - | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ - | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ - | xtensa-* \ - | ymp-* \ - | z8k-*) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - crds | unos) - basic_machine=m68k-crds - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - mmix*) - basic_machine=mmix-knuth - os=-mmixware - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - or32 | or32-*) - basic_machine=or32-unknown - os=-coff - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon) - basic_machine=i686-pc - ;; - pentiumii | pentium2) - basic_machine=i686-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3d) - basic_machine=alpha-cray - os=-unicos - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - windows32) - basic_machine=i386-pc - os=-windows32-msvcrt - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh3 | sh4 | sh3eb | sh4eb) - basic_machine=sh-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparc | sparcv9 | sparcv9b) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - c4x*) - basic_machine=c4x-none - os=-coff - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto*) - os=-nto-qnx - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -vxsim* | -vxworks*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/util/mkelfImage/config/install-sh b/util/mkelfImage/config/install-sh deleted file mode 100755 index 594a4edbff..0000000000 --- a/util/mkelfImage/config/install-sh +++ /dev/null @@ -1,251 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/util/mkelfImage/configure b/util/mkelfImage/configure deleted file mode 100755 index 150e5c8810..0000000000 --- a/util/mkelfImage/configure +++ /dev/null @@ -1,6067 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.61. -# -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -as_nl=' -' -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi - -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# CDPATH. -$as_unset CDPATH - - -if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes -else - as_have_required=no -fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : -else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - case $as_dir in - /*) - for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" - done;; - esac -done -IFS=$as_save_IFS - - - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = "$1" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break -fi - -fi - - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi - - - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } -fi - - -fi - -fi - - - -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell autoconf@gnu.org about your system, - echo including any error possibly output before this - echo message -} - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir -fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - - -exec 7<&0 </dev/null 6>&1 - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= - -ac_unique_file="Makefile.conf.in" -# Factoring default headers for most tests. -ac_includes_default="\ -#include <stdio.h> -#ifdef HAVE_SYS_TYPES_H -# include <sys/types.h> -#endif -#ifdef HAVE_SYS_STAT_H -# include <sys/stat.h> -#endif -#ifdef STDC_HEADERS -# include <stdlib.h> -# include <stddef.h> -#else -# ifdef HAVE_STDLIB_H -# include <stdlib.h> -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include <memory.h> -# endif -# include <string.h> -#endif -#ifdef HAVE_STRINGS_H -# include <strings.h> -#endif -#ifdef HAVE_INTTYPES_H -# include <inttypes.h> -#endif -#ifdef HAVE_STDINT_H -# include <stdint.h> -#endif -#ifdef HAVE_UNISTD_H -# include <unistd.h> -#endif" - -ac_subst_vars='SHELL -PATH_SEPARATOR -PACKAGE_NAME -PACKAGE_TARNAME -PACKAGE_VERSION -PACKAGE_STRING -PACKAGE_BUGREPORT -exec_prefix -prefix -program_transform_name -bindir -sbindir -libexecdir -datarootdir -datadir -sysconfdir -sharedstatedir -localstatedir -includedir -oldincludedir -docdir -infodir -htmldir -dvidir -pdfdir -psdir -libdir -localedir -mandir -DEFS -ECHO_C -ECHO_N -ECHO_T -LIBS -build_alias -host_alias -target_alias -build -build_cpu -build_vendor -build_os -host -host_cpu -host_vendor -host_os -CC -CFLAGS -LDFLAGS -CPPFLAGS -ac_ct_CC -EXEEXT -OBJEXT -MKDIR -RM -CP -LN -TAR -RPM -SED -FIND -CPP -GREP -EGREP -LD -AS -OBJCOPY -I386_CC -I386_CPP -I386_LD -I386_AS -I386_OBJCOPY -IA64_CC -IA64_CPP -IA64_LD -IA64_AS -IA64_OBJCOPY -HOST_CC -libc_cv_fno_stack_protector -HOST_CFLAGS -I386_CFLAGS -I386_ASFLAGS -I386_LDFLAGS -IA64_CFLAGS -IA64_ASFLAGS -IA64_LDFLAGS -LIBOBJS -LTLIBOBJS' -ac_subst_files='' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` - eval enable_$ac_feature=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` - eval enable_$ac_feature=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/[-.]/_/g'` - eval with_$ac_package=\$ac_optarg ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/[-.]/_/g'` - eval with_$ac_package=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute directory names. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { echo "$as_me: error: Working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$0" || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures this package to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - - cat <<\_ACEOF - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-i386 enable building i386 code - --with-ia64 enable building ia64 code - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> - LIBS libraries to pass to the linker, e.g. -l<library> - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if - you have headers in a nonstandard directory <include dir> - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -configure -generated by GNU Autoconf 2.61 - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by $as_me, which was -generated by GNU Autoconf 2.61. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## -## File substitutions. ## -## ------------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -n "$CONFIG_SITE"; then - set x "$CONFIG_SITE" -elif test "x$prefix" != xNONE; then - set x "$prefix/share/config.site" "$prefix/etc/config.site" -else - set x "$ac_default_prefix/share/config.site" \ - "$ac_default_prefix/etc/config.site" -fi -shift -for ac_site_file -do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - - - - - - - - - - - - - - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -ac_aux_dir= -for ac_dir in ./config "$srcdir"/./config; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./config \"$srcdir\"/./config" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in ./config \"$srcdir\"/./config" >&2;} - { (exit 1); exit 1; }; } -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - - - - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } - -{ echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6; } -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6; } -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } -fi - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -#AC_CANONICAL_TARGET - - -case $host_cpu in - i?86 ) - target_cpu="i386" - ;; - * ) - target_cpu="$host_cpu" - ;; -esac - -targets="" - - -# Check whether --with-i386 was given. -if test "${with_i386+set}" = set; then - withval=$with_i386; if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi -else - with_i386="no" -fi - - - -# Check whether --with-ia64 was given. -if test "${with_ia64+set}" = set; then - withval=$with_ia64; if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi -else - with_ia64="no" -fi - - -with_default="no" -if test "$with_i386" = "no" && - test "$with_ia64" = "no" ; then - with_default=`echo $target_cpu | tr a-z A-Z` -fi - -{ echo "$as_me:$LINENO: with_default=$with_default" >&5 -echo "$as_me: with_default=$with_default" >&6;} -{ echo "$as_me:$LINENO: with_i386=$with_i386" >&5 -echo "$as_me: with_i386=$with_i386" >&6;} -{ echo "$as_me:$LINENO: with_ia64=$with_ia64" >&5 -echo "$as_me: with_ia64=$with_ia64" >&6;} - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO: checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -# -# List of possible output files, starting from the most likely. -# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) -# only as a last resort. b.out is created by i960 compilers. -ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' -# -# The IRIX 6 linker writes into existing files which may not be -# executable, retaining their permissions. Remove them first so a -# subsequent execution test works. -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { (ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi - -{ echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6; } -if test -z "$ac_file"; then - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext - -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -{ echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } -{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6; } - -{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdarg.h> -#include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_c89=$ac_arg -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6; } ;; - xno) - { echo "$as_me:$LINENO: result: unsupported" >&5 -echo "${ECHO_T}unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; -esac - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -# Extract the first word of "mkdir", so it can be a program name with args. -set dummy mkdir; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_MKDIR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$MKDIR"; then - ac_cv_prog_MKDIR="$MKDIR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_MKDIR="mkdir" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -MKDIR=$ac_cv_prog_MKDIR -if test -n "$MKDIR"; then - { echo "$as_me:$LINENO: result: $MKDIR" >&5 -echo "${ECHO_T}$MKDIR" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -# Extract the first word of "rm", so it can be a program name with args. -set dummy rm; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_RM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RM"; then - ac_cv_prog_RM="$RM" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RM="rm" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -RM=$ac_cv_prog_RM -if test -n "$RM"; then - { echo "$as_me:$LINENO: result: $RM" >&5 -echo "${ECHO_T}$RM" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -# Extract the first word of "cp", so it can be a program name with args. -set dummy cp; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CP"; then - ac_cv_prog_CP="$CP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CP="cp" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CP=$ac_cv_prog_CP -if test -n "$CP"; then - { echo "$as_me:$LINENO: result: $CP" >&5 -echo "${ECHO_T}$CP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -# Extract the first word of "ln", so it can be a program name with args. -set dummy ln; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_LN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$LN"; then - ac_cv_prog_LN="$LN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LN="ln" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -LN=$ac_cv_prog_LN -if test -n "$LN"; then - { echo "$as_me:$LINENO: result: $LN" >&5 -echo "${ECHO_T}$LN" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -# Extract the first word of "tar", so it can be a program name with args. -set dummy tar; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_TAR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$TAR"; then - ac_cv_prog_TAR="$TAR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_TAR="tar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -TAR=$ac_cv_prog_TAR -if test -n "$TAR"; then - { echo "$as_me:$LINENO: result: $TAR" >&5 -echo "${ECHO_T}$TAR" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -# Extract the first word of "rpm", so it can be a program name with args. -set dummy rpm; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_RPM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RPM"; then - ac_cv_prog_RPM="$RPM" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RPM="rpm" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -RPM=$ac_cv_prog_RPM -if test -n "$RPM"; then - { echo "$as_me:$LINENO: result: $RPM" >&5 -echo "${ECHO_T}$RPM" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -# Extract the first word of "sed", so it can be a program name with args. -set dummy sed; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$SED"; then - ac_cv_prog_SED="$SED" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_SED="sed" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -SED=$ac_cv_prog_SED -if test -n "$SED"; then - { echo "$as_me:$LINENO: result: $SED" >&5 -echo "${ECHO_T}$SED" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -# Extract the first word of "find", so it can be a program name with args. -set dummy find; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_FIND+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$FIND"; then - ac_cv_prog_FIND="$FIND" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_FIND="find" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -FIND=$ac_cv_prog_FIND -if test -n "$FIND"; then - { echo "$as_me:$LINENO: result: $FIND" >&5 -echo "${ECHO_T}$FIND" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 -echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } -if test "${ac_cv_path_GREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Extract the first word of "grep ggrep" to use in msg output -if test -z "$GREP"; then -set dummy grep ggrep; ac_prog_name=$2 -if test "${ac_cv_path_GREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_path_GREP_found=false -# Loop through the user's path and test for each of PROGNAME-LIST -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue - # Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - - $ac_path_GREP_found && break 3 - done -done - -done -IFS=$as_save_IFS - - -fi - -GREP="$ac_cv_path_GREP" -if test -z "$GREP"; then - { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } -fi - -else - ac_cv_path_GREP=$GREP -fi - - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 -echo "${ECHO_T}$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - # Extract the first word of "egrep" to use in msg output -if test -z "$EGREP"; then -set dummy egrep; ac_prog_name=$2 -if test "${ac_cv_path_EGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_path_EGREP_found=false -# Loop through the user's path and test for each of PROGNAME-LIST -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue - # Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - - $ac_path_EGREP_found && break 3 - done -done - -done -IFS=$as_save_IFS - - -fi - -EGREP="$ac_cv_path_EGREP" -if test -z "$EGREP"; then - { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } -fi - -else - ac_cv_path_EGREP=$EGREP -fi - - - fi -fi -{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 -echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdlib.h> -#include <stdarg.h> -#include <string.h> -#include <float.h> - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_stdc=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <string.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdlib.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ctype.h> -#include <stdlib.h> -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -fi -fi -{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -if test "${ac_cv_header_zlib_h+set}" = set; then - { echo "$as_me:$LINENO: checking for zlib.h" >&5 -echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; } -if test "${ac_cv_header_zlib_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5 -echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; } -else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking zlib.h usability" >&5 -echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <zlib.h> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } - -# Is the header present? -{ echo "$as_me:$LINENO: checking zlib.h presence" >&5 -echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <zlib.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: zlib.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: zlib.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: zlib.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: zlib.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: zlib.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: zlib.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: zlib.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: zlib.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: zlib.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: zlib.h: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ echo "$as_me:$LINENO: checking for zlib.h" >&5 -echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; } -if test "${ac_cv_header_zlib_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_zlib_h=$ac_header_preproc -fi -{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5 -echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; } - -fi -if test $ac_cv_header_zlib_h = yes; then - { echo "$as_me:$LINENO: checking for inflateInit_ in -lz" >&5 -echo $ECHO_N "checking for inflateInit_ in -lz... $ECHO_C" >&6; } -if test "${ac_cv_lib_z_inflateInit_+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char inflateInit_ (); -int -main () -{ -return inflateInit_ (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_z_inflateInit_=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_z_inflateInit_=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflateInit_" >&5 -echo "${ECHO_T}$ac_cv_lib_z_inflateInit_" >&6; } -if test $ac_cv_lib_z_inflateInit_ = yes; then - cat >>confdefs.h <<\_ACEOF -#define HAVE_ZLIB_H 1 -_ACEOF - LIBS="$LIBS -lz" -fi - -fi - - - -if test "with_default" != no ; then - if test "$CC" = no; then - { { echo "$as_me:$LINENO: error: cc not found" >&5 -echo "$as_me: error: cc not found" >&2;} - { (exit 1); exit 1; }; } - fi - eval "${with_default}_CC='$CC'" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - if test "$CPP" = no; then - { { echo "$as_me:$LINENO: error: cpp not found" >&5 -echo "$as_me: error: cpp not found" >&2;} - { (exit 1); exit 1; }; } - fi - eval "${with_default}_CPP='$CPP'" - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args. -set dummy ${ac_tool_prefix}ld; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$LD"; then - ac_cv_prog_LD="$LD" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LD="${ac_tool_prefix}ld" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -LD=$ac_cv_prog_LD -if test -n "$LD"; then - { echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LD"; then - ac_ct_LD=$LD - # Extract the first word of "ld", so it can be a program name with args. -set dummy ld; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_LD"; then - ac_cv_prog_ac_ct_LD="$ac_ct_LD" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LD="ld" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_LD=$ac_cv_prog_ac_ct_LD -if test -n "$ac_ct_LD"; then - { echo "$as_me:$LINENO: result: $ac_ct_LD" >&5 -echo "${ECHO_T}$ac_ct_LD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_LD" = x; then - LD="no" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - LD=$ac_ct_LD - fi -else - LD="$ac_cv_prog_LD" -fi - - if test "$LD" = no; then - { { echo "$as_me:$LINENO: error: ld not found" >&5 -echo "$as_me: error: ld not found" >&2;} - { (exit 1); exit 1; }; } - fi - eval "${with_default}_LD='$LD'" - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AS="${ac_tool_prefix}as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -AS=$ac_cv_prog_AS -if test -n "$AS"; then - { echo "$as_me:$LINENO: result: $AS" >&5 -echo "${ECHO_T}$AS" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_AS"; then - ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AS="as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_AS=$ac_cv_prog_ac_ct_AS -if test -n "$ac_ct_AS"; then - { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -echo "${ECHO_T}$ac_ct_AS" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_AS" = x; then - AS="no" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - AS=$ac_ct_AS - fi -else - AS="$ac_cv_prog_AS" -fi - - if test "$AS" = no; then - { { echo "$as_me:$LINENO: error: as not found" >&5 -echo "$as_me: error: as not found" >&2;} - { (exit 1); exit 1; }; } - fi - eval "${with_default}_AS='$AS'" - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args. -set dummy ${ac_tool_prefix}objcopy; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_OBJCOPY+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$OBJCOPY"; then - ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -OBJCOPY=$ac_cv_prog_OBJCOPY -if test -n "$OBJCOPY"; then - { echo "$as_me:$LINENO: result: $OBJCOPY" >&5 -echo "${ECHO_T}$OBJCOPY" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJCOPY"; then - ac_ct_OBJCOPY=$OBJCOPY - # Extract the first word of "objcopy", so it can be a program name with args. -set dummy objcopy; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_OBJCOPY+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_OBJCOPY"; then - ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJCOPY="objcopy" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY -if test -n "$ac_ct_OBJCOPY"; then - { echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5 -echo "${ECHO_T}$ac_ct_OBJCOPY" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_OBJCOPY" = x; then - OBJCOPY="no" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - OBJCOPY=$ac_ct_OBJCOPY - fi -else - OBJCOPY="$ac_cv_prog_OBJCOPY" -fi - - if test "$OBJCOPY" = no; then - { { echo "$as_me:$LINENO: error: objcopy not found" >&5 -echo "$as_me: error: objcopy not found" >&2;} - { (exit 1); exit 1; }; } - fi - eval "${with_default}_OBJCOPY='$OBJCOPY'" - if test "$with_default" = "X86_64" ; then - with_i386=yes - fi -fi - -if test "$with_i386" != "no" ; then - cc="gcc -m32" - cpp=cpp - ld=ld - as="as -32" - objcopy=objcopy - if test "$with_i386" != "" -a "$with_i386" != "yes" ; then - cc="$with_i386-$cc" - cpp="$with_i386-$cpp" - ld="$with_i386-$ld" - as="$with_i386-$as" - objcopy="$with_i386-$objcopy" - fi - # Extract the first word of "$cc", so it can be a program name with args. -set dummy $cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_I386_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$I386_CC"; then - ac_cv_prog_I386_CC="$I386_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_I386_CC="$cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_I386_CC" && ac_cv_prog_I386_CC="""" -fi -fi -I386_CC=$ac_cv_prog_I386_CC -if test -n "$I386_CC"; then - { echo "$as_me:$LINENO: result: $I386_CC" >&5 -echo "${ECHO_T}$I386_CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$I386_CC" = no; then - - { { echo "$as_me:$LINENO: error: $cc not found" >&5 -echo "$as_me: error: $cc not found" >&2;} - { (exit 1); exit 1; }; } - fi - # Extract the first word of "$cpp", so it can be a program name with args. -set dummy $cpp; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_I386_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$I386_CPP"; then - ac_cv_prog_I386_CPP="$I386_CPP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_I386_CPP="$cpp" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_I386_CPP" && ac_cv_prog_I386_CPP="""" -fi -fi -I386_CPP=$ac_cv_prog_I386_CPP -if test -n "$I386_CPP"; then - { echo "$as_me:$LINENO: result: $I386_CPP" >&5 -echo "${ECHO_T}$I386_CPP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$I386_CPP" = no; then - { { echo "$as_me:$LINENO: error: $cpp not found" >&5 -echo "$as_me: error: $cpp not found" >&2;} - { (exit 1); exit 1; }; } - fi - # Extract the first word of "$ld", so it can be a program name with args. -set dummy $ld; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_I386_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$I386_LD"; then - ac_cv_prog_I386_LD="$I386_LD" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_I386_LD="$ld" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_I386_LD" && ac_cv_prog_I386_LD="""" -fi -fi -I386_LD=$ac_cv_prog_I386_LD -if test -n "$I386_LD"; then - { echo "$as_me:$LINENO: result: $I386_LD" >&5 -echo "${ECHO_T}$I386_LD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$I386_AS" = no; then - { { echo "$as_me:$LINENO: error: $ld not found" >&5 -echo "$as_me: error: $ld not found" >&2;} - { (exit 1); exit 1; }; } - fi - # Extract the first word of "$as", so it can be a program name with args. -set dummy $as; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_I386_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$I386_AS"; then - ac_cv_prog_I386_AS="$I386_AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_I386_AS="$as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_I386_AS" && ac_cv_prog_I386_AS="""" -fi -fi -I386_AS=$ac_cv_prog_I386_AS -if test -n "$I386_AS"; then - { echo "$as_me:$LINENO: result: $I386_AS" >&5 -echo "${ECHO_T}$I386_AS" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$I386_AS" = no; then - { { echo "$as_me:$LINENO: error: $as not found" >&5 -echo "$as_me: error: $as not found" >&2;} - { (exit 1); exit 1; }; } - fi - # Extract the first word of "$objcopy", so it can be a program name with args. -set dummy $objcopy; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_I386_OBJCOPY+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$I386_OBJCOPY"; then - ac_cv_prog_I386_OBJCOPY="$I386_OBJCOPY" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_I386_OBJCOPY="$objcopy" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_I386_OBJCOPY" && ac_cv_prog_I386_OBJCOPY="""" -fi -fi -I386_OBJCOPY=$ac_cv_prog_I386_OBJCOPY -if test -n "$I386_OBJCOPY"; then - { echo "$as_me:$LINENO: result: $I386_OBJCOPY" >&5 -echo "${ECHO_T}$I386_OBJCOPY" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$I386_OBJCOPY" = no; then - { { echo "$as_me:$LINENO: error: $objcopy not found" >&5 -echo "$as_me: error: $objcopy not found" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -if test "$with_ia64" != "no" ; then - cc=gcc - cpp=cpp - ld=ld - as=as - objcopy=objcopy - if test "$with_ia64" != "" -a "$with_ia64" != "yes" ; then - cc="$with_ia64-$cc" - cpp="$with_ia64-$cpp" - ld="$with_ia64-$ld" - as="$with_ia64-$as" - objcopy="$with_ia64-$objcopy" - fi - # Extract the first word of "$cc", so it can be a program name with args. -set dummy $cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_IA64_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$IA64_CC"; then - ac_cv_prog_IA64_CC="$IA64_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_IA64_CC="$cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_IA64_CC" && ac_cv_prog_IA64_CC="""" -fi -fi -IA64_CC=$ac_cv_prog_IA64_CC -if test -n "$IA64_CC"; then - { echo "$as_me:$LINENO: result: $IA64_CC" >&5 -echo "${ECHO_T}$IA64_CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$IA64_CC" = no; then - - { { echo "$as_me:$LINENO: error: $cc not found" >&5 -echo "$as_me: error: $cc not found" >&2;} - { (exit 1); exit 1; }; } - fi - # Extract the first word of "$cpp", so it can be a program name with args. -set dummy $cpp; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_IA64_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$IA64_CPP"; then - ac_cv_prog_IA64_CPP="$IA64_CPP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_IA64_CPP="$cpp" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_IA64_CPP" && ac_cv_prog_IA64_CPP="""" -fi -fi -IA64_CPP=$ac_cv_prog_IA64_CPP -if test -n "$IA64_CPP"; then - { echo "$as_me:$LINENO: result: $IA64_CPP" >&5 -echo "${ECHO_T}$IA64_CPP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$IA64_CPP" = no; then - { { echo "$as_me:$LINENO: error: $cpp not found" >&5 -echo "$as_me: error: $cpp not found" >&2;} - { (exit 1); exit 1; }; } - fi - # Extract the first word of "$ld", so it can be a program name with args. -set dummy $ld; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_IA64_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$IA64_LD"; then - ac_cv_prog_IA64_LD="$IA64_LD" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_IA64_LD="$ld" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_IA64_LD" && ac_cv_prog_IA64_LD="""" -fi -fi -IA64_LD=$ac_cv_prog_IA64_LD -if test -n "$IA64_LD"; then - { echo "$as_me:$LINENO: result: $IA64_LD" >&5 -echo "${ECHO_T}$IA64_LD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$IA64_AS" = no; then - { { echo "$as_me:$LINENO: error: $ld not found" >&5 -echo "$as_me: error: $ld not found" >&2;} - { (exit 1); exit 1; }; } - fi - # Extract the first word of "$as", so it can be a program name with args. -set dummy $as; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_IA64_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$IA64_AS"; then - ac_cv_prog_IA64_AS="$IA64_AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_IA64_AS="$as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_IA64_AS" && ac_cv_prog_IA64_AS="""" -fi -fi -IA64_AS=$ac_cv_prog_IA64_AS -if test -n "$IA64_AS"; then - { echo "$as_me:$LINENO: result: $IA64_AS" >&5 -echo "${ECHO_T}$IA64_AS" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$IA64_AS" = no; then - { { echo "$as_me:$LINENO: error: $as not found" >&5 -echo "$as_me: error: $as not found" >&2;} - { (exit 1); exit 1; }; } - fi - # Extract the first word of "$objcopy", so it can be a program name with args. -set dummy $objcopy; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_IA64_OBJCOPY+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$IA64_OBJCOPY"; then - ac_cv_prog_IA64_OBJCOPY="$IA64_OBJCOPY" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_IA64_OBJCOPY="$objcopy" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_IA64_OBJCOPY" && ac_cv_prog_IA64_OBJCOPY="""" -fi -fi -IA64_OBJCOPY=$ac_cv_prog_IA64_OBJCOPY -if test -n "$IA64_OBJCOPY"; then - { echo "$as_me:$LINENO: result: $IA64_OBJCOPY" >&5 -echo "${ECHO_T}$IA64_OBJCOPY" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - if test "$IA64_OBJCOPY" = no; then - { { echo "$as_me:$LINENO: error: $objcopy not found" >&5 -echo "$as_me: error: $objcopy not found" >&2;} - { (exit 1); exit 1; }; } - fi -fi - - - -HOST_CC=$CC -HOST_CFLAGS="$HOST_CFLAGS -O2 -Wall \$(HOST_CPPFLAGS)" - -I386_CFLAGS="$I386_CFLAGS -Os -ffreestanding -Wall -W -Wno-format \$(I386_CPPFLAGS)" -I386_ASFLAGS='' -I386_LDFLAGS='-static --warn-multiple-gp --warn-common' - -IA64_CFLAGS="$IA64_CFLAGS -Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables \$(IA64_CPPFLAGS)" -IA64_ASFLAGS='-mconstant-gp -mauto-pic' -IA64_LDFLAGS='-static --warn-multiple-gp --warn-common' - - - -{ echo "$as_me:$LINENO: checking for -fno-stack-protector" >&5 -echo $ECHO_N "checking for -fno-stack-protector... $ECHO_C" >&6; } -if test "${libc_cv_fno_stack_protector+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -cat > conftest.c <<EOF -int foo; -main () { return 0;} -EOF -if { ac_try='$I386_CC -fno-stack-protector - -o conftest conftest.c 1>&5' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } -then - libc_cv_fno_stack_protector=yes -else - libc_cv_fno_stack_protector=no -fi -rm -f conftest* -fi -{ echo "$as_me:$LINENO: result: $libc_cv_fno_stack_protector" >&5 -echo "${ECHO_T}$libc_cv_fno_stack_protector" >&6; } -if test $libc_cv_fno_stack_protector = yes; then - I386_CFLAGS="$I386_CFLAGS -fno-stack-protector" - IA64_CFLAGS="$IA64_CFLAGS -fno-stack-protector" - -fi - - - - - - - - - - - - - - - - - - - - - - -ac_config_files="$ac_config_files Makefile.conf" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else - { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -ac_script=' -t clear -:clear -s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g -t quote -s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g -t quote -b any -:quote -s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g -s/\[/\\&/g -s/\]/\\&/g -s/\$/$$/g -H -:any -${ - g - s/^\n// - s/\n/ /g - p -} -' -DEFS=`sed -n "$ac_script" confdefs.h` - - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -as_nl=' -' -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi - -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir -fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 - -# Save the log message, to keep $[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by $as_me, which was -generated by GNU Autoconf 2.61. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -# Files that config.status was made for. -config_files="$ac_config_files" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - -Configuration files: -$config_files - -Report bugs to <bug-autoconf@gnu.org>." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.61, - with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2006 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - echo "$ac_cs_version"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --he | --h | --help | --hel | -h ) - echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - CONFIG_SHELL=$SHELL - export CONFIG_SHELL - exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "Makefile.conf") CONFIG_FILES="$CONFIG_FILES Makefile.conf" ;; - - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -# -# Set up the sed scripts for CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "$CONFIG_FILES"; then - -_ACEOF - - - -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - cat >conf$$subs.sed <<_ACEOF -SHELL!$SHELL$ac_delim -PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -PACKAGE_NAME!$PACKAGE_NAME$ac_delim -PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -PACKAGE_STRING!$PACKAGE_STRING$ac_delim -PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -exec_prefix!$exec_prefix$ac_delim -prefix!$prefix$ac_delim -program_transform_name!$program_transform_name$ac_delim -bindir!$bindir$ac_delim -sbindir!$sbindir$ac_delim -libexecdir!$libexecdir$ac_delim -datarootdir!$datarootdir$ac_delim -datadir!$datadir$ac_delim -sysconfdir!$sysconfdir$ac_delim -sharedstatedir!$sharedstatedir$ac_delim -localstatedir!$localstatedir$ac_delim -includedir!$includedir$ac_delim -oldincludedir!$oldincludedir$ac_delim -docdir!$docdir$ac_delim -infodir!$infodir$ac_delim -htmldir!$htmldir$ac_delim -dvidir!$dvidir$ac_delim -pdfdir!$pdfdir$ac_delim -psdir!$psdir$ac_delim -libdir!$libdir$ac_delim -localedir!$localedir$ac_delim -mandir!$mandir$ac_delim -DEFS!$DEFS$ac_delim -ECHO_C!$ECHO_C$ac_delim -ECHO_N!$ECHO_N$ac_delim -ECHO_T!$ECHO_T$ac_delim -LIBS!$LIBS$ac_delim -build_alias!$build_alias$ac_delim -host_alias!$host_alias$ac_delim -target_alias!$target_alias$ac_delim -build!$build$ac_delim -build_cpu!$build_cpu$ac_delim -build_vendor!$build_vendor$ac_delim -build_os!$build_os$ac_delim -host!$host$ac_delim -host_cpu!$host_cpu$ac_delim -host_vendor!$host_vendor$ac_delim -host_os!$host_os$ac_delim -CC!$CC$ac_delim -CFLAGS!$CFLAGS$ac_delim -LDFLAGS!$LDFLAGS$ac_delim -CPPFLAGS!$CPPFLAGS$ac_delim -ac_ct_CC!$ac_ct_CC$ac_delim -EXEEXT!$EXEEXT$ac_delim -OBJEXT!$OBJEXT$ac_delim -MKDIR!$MKDIR$ac_delim -RM!$RM$ac_delim -CP!$CP$ac_delim -LN!$LN$ac_delim -TAR!$TAR$ac_delim -RPM!$RPM$ac_delim -SED!$SED$ac_delim -FIND!$FIND$ac_delim -CPP!$CPP$ac_delim -GREP!$GREP$ac_delim -EGREP!$EGREP$ac_delim -LD!$LD$ac_delim -AS!$AS$ac_delim -OBJCOPY!$OBJCOPY$ac_delim -I386_CC!$I386_CC$ac_delim -I386_CPP!$I386_CPP$ac_delim -I386_LD!$I386_LD$ac_delim -I386_AS!$I386_AS$ac_delim -I386_OBJCOPY!$I386_OBJCOPY$ac_delim -IA64_CC!$IA64_CC$ac_delim -IA64_CPP!$IA64_CPP$ac_delim -IA64_LD!$IA64_LD$ac_delim -IA64_AS!$IA64_AS$ac_delim -IA64_OBJCOPY!$IA64_OBJCOPY$ac_delim -HOST_CC!$HOST_CC$ac_delim -libc_cv_fno_stack_protector!$libc_cv_fno_stack_protector$ac_delim -HOST_CFLAGS!$HOST_CFLAGS$ac_delim -I386_CFLAGS!$I386_CFLAGS$ac_delim -I386_ASFLAGS!$I386_ASFLAGS$ac_delim -I386_LDFLAGS!$I386_LDFLAGS$ac_delim -IA64_CFLAGS!$IA64_CFLAGS$ac_delim -IA64_ASFLAGS!$IA64_ASFLAGS$ac_delim -IA64_LDFLAGS!$IA64_LDFLAGS$ac_delim -LIBOBJS!$LIBOBJS$ac_delim -LTLIBOBJS!$LTLIBOBJS$ac_delim -_ACEOF - - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 87; then - break - elif $ac_last_try; then - { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -if test -n "$ac_eof"; then - ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` - ac_eof=`expr $ac_eof + 1` -fi - -cat >>$CONFIG_STATUS <<_ACEOF -cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -_ACEOF -sed ' -s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -s/^/s,@/; s/!/@,|#_!!_#|/ -:n -t n -s/'"$ac_delim"'$/,g/; t -s/$/\\/; p -N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -' >>$CONFIG_STATUS <conf$$subs.sed -rm -f conf$$subs.sed -cat >>$CONFIG_STATUS <<_ACEOF -:end -s/|#_!!_#|//g -CEOF$ac_eof -_ACEOF - - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF -fi # test -n "$CONFIG_FILES" - - -for ac_tag in :F $CONFIG_FILES -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -echo "$as_me: error: Invalid tag $ac_tag." >&2;} - { (exit 1); exit 1; }; };; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; - esac - ac_file_inputs="$ac_file_inputs $ac_f" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input="Generated from "`IFS=: - echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - fi - - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin";; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= - -case `sed -n '/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p -' $ac_file_inputs` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s&@configure_input@&$configure_input&;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -$ac_datarootdir_hack -" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} - - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out"; rm -f "$tmp/out";; - *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; - esac - ;; - - - - esac - -done # for ac_tag - - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - - - diff --git a/util/mkelfImage/configure.ac b/util/mkelfImage/configure.ac deleted file mode 100644 index af0fe19aaa..0000000000 --- a/util/mkelfImage/configure.ac +++ /dev/null @@ -1,233 +0,0 @@ -dnl -dnl configure.ac for mkelfImage -dnl -dnl - -dnl ---Required -AC_INIT(Makefile.conf.in) -AC_CONFIG_AUX_DIR(./config) - -dnl --Options - - -dnl -- Compilation platform configuration -AC_CANONICAL_HOST -#AC_CANONICAL_TARGET - - -dnl Compute target cpu -case $host_cpu in - i?86 ) - target_cpu="i386" - ;; - * ) - target_cpu="$host_cpu" - ;; -esac - -dnl ---Options -targets="" - -AC_ARG_WITH([i386], AC_HELP_STRING([--with-i386],[enable building i386 code]), - [ if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi], - [ with_i386="no"]) - -AC_ARG_WITH([ia64], AC_HELP_STRING([--with-ia64],[enable building ia64 code]), - [ if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi], - [ with_ia64="no"]) - -dnl If no targets are specified use a default -with_default="no" -if test "$with_i386" = "no" && - test "$with_ia64" = "no" ; then - with_default=`echo $target_cpu | tr [a-z] [A-Z]` -fi - -AC_MSG_NOTICE([with_default=$with_default]) -AC_MSG_NOTICE([with_i386=$with_i386]) -AC_MSG_NOTICE([with_ia64=$with_ia64]) - -dnl ---Programs -dnl To specify a different compiler, just 'export CC=/path/to/compiler' - -AC_PROG_CC - - -AC_CHECK_PROG([MKDIR], mkdir, mkdir, [], [$PATH]) -AC_CHECK_PROG([RM], rm, rm, [], [$PATH]) -AC_CHECK_PROG([CP], cp, cp, [], [$PATH]) -AC_CHECK_PROG([LN], ln, ln, [], [$PATH]) -AC_CHECK_PROG([TAR], tar, tar, [], [$PATH]) -AC_CHECK_PROG([RPM], rpm, rpm, [], [$PATH]) -AC_CHECK_PROG([SED], sed, sed, [], [$PATH]) -AC_CHECK_PROG([FIND], find, find, [], [$PATH]) - -AC_CHECK_HEADER(zlib.h, AC_CHECK_LIB(z, inflateInit_, [AC_DEFINE(HAVE_ZLIB_H, 1) LIBS="$LIBS -lz"])) - -dnl Find the default programs -if test "with_default" != no ; then - if test "$CC" = no; then - AC_MSG_ERROR([cc not found]) - fi - eval "${with_default}_CC='$CC'" - AC_PROG_CPP - if test "$CPP" = no; then - AC_MSG_ERROR([cpp not found]) - fi - eval "${with_default}_CPP='$CPP'" - AC_CHECK_TOOL([LD], ld, no) - if test "$LD" = no; then - AC_MSG_ERROR([ld not found]) - fi - eval "${with_default}_LD='$LD'" - AC_CHECK_TOOL([AS], as, no) - if test "$AS" = no; then - AC_MSG_ERROR([as not found]) - fi - eval "${with_default}_AS='$AS'" - AC_CHECK_TOOL([OBJCOPY], objcopy, no) - if test "$OBJCOPY" = no; then - AC_MSG_ERROR([objcopy not found]) - fi - eval "${with_default}_OBJCOPY='$OBJCOPY'" - if test "$with_default" = "X86_64" ; then - with_i386=yes - fi -fi - -dnl Find the programs for compiling i386 targets -if test "$with_i386" != "no" ; then - cc="gcc -m32" - cpp=cpp - ld=ld - as="as -32" - objcopy=objcopy - if test "$with_i386" != "" -a "$with_i386" != "yes" ; then - cc="$with_i386-$cc" - cpp="$with_i386-$cpp" - ld="$with_i386-$ld" - as="$with_i386-$as" - objcopy="$with_i386-$objcopy" - fi - AC_CHECK_PROG([I386_CC], [$cc], [$cc], [""], [$PATH]) - if test "$I386_CC" = no; then - - AC_MSG_ERROR([$cc not found]) - fi - AC_CHECK_PROG([I386_CPP], [$cpp], [$cpp], [""], [$PATH]) - if test "$I386_CPP" = no; then - AC_MSG_ERROR([$cpp not found]) - fi - AC_CHECK_PROG([I386_LD], [$ld], [$ld], [""], [$PATH]) - if test "$I386_AS" = no; then - AC_MSG_ERROR([$ld not found]) - fi - AC_CHECK_PROG([I386_AS], [$as], [$as], [""], [$PATH]) - if test "$I386_AS" = no; then - AC_MSG_ERROR([$as not found]) - fi - AC_CHECK_PROG([I386_OBJCOPY], [$objcopy], [$objcopy],[""], [$PATH]) - if test "$I386_OBJCOPY" = no; then - AC_MSG_ERROR([$objcopy not found]) - fi -fi - -dnl Find the programs for compiling ia64 targets -if test "$with_ia64" != "no" ; then - cc=gcc - cpp=cpp - ld=ld - as=as - objcopy=objcopy - if test "$with_ia64" != "" -a "$with_ia64" != "yes" ; then - cc="$with_ia64-$cc" - cpp="$with_ia64-$cpp" - ld="$with_ia64-$ld" - as="$with_ia64-$as" - objcopy="$with_ia64-$objcopy" - fi - AC_CHECK_PROG([IA64_CC], [$cc], [$cc], [""], [$PATH]) - if test "$IA64_CC" = no; then - - AC_MSG_ERROR([$cc not found]) - fi - AC_CHECK_PROG([IA64_CPP], [$cpp], [$cpp], [""], [$PATH]) - if test "$IA64_CPP" = no; then - AC_MSG_ERROR([$cpp not found]) - fi - AC_CHECK_PROG([IA64_LD], [$ld], [$ld], [""], [$PATH]) - if test "$IA64_AS" = no; then - AC_MSG_ERROR([$ld not found]) - fi - AC_CHECK_PROG([IA64_AS], [$as], [$as], [""], [$PATH]) - if test "$IA64_AS" = no; then - AC_MSG_ERROR([$as not found]) - fi - AC_CHECK_PROG([IA64_OBJCOPY], [$objcopy], [$objcopy],[""], [$PATH]) - if test "$IA64_OBJCOPY" = no; then - AC_MSG_ERROR([$objcopy not found]) - fi -fi - - -dnl ---Output variables... - -HOST_CC=$CC -HOST_CFLAGS="$HOST_CFLAGS -O2 -Wall \$(HOST_CPPFLAGS)" - -dnl TODO: figure out how to set these appropriately for compilers other than gcc -I386_CFLAGS="$I386_CFLAGS -Os -ffreestanding -Wall -W -Wno-format \$(I386_CPPFLAGS)" -I386_ASFLAGS='' -I386_LDFLAGS='-static --warn-multiple-gp --warn-common' - -dnl TODO: figure out how to set these appropriately for compilers other than gcc -IA64_CFLAGS="$IA64_CFLAGS -Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables \$(IA64_CPPFLAGS)" -IA64_ASFLAGS='-mconstant-gp -mauto-pic' -IA64_LDFLAGS='-static --warn-multiple-gp --warn-common' - -AC_SUBST([HOST_CC]) - -AC_CACHE_CHECK(for -fno-stack-protector, libc_cv_fno_stack_protector, [ -cat > conftest.c <<EOF -int foo; -main () { return 0;} -EOF -if AC_TRY_COMMAND([$I386_CC -fno-stack-protector - -o conftest conftest.c 1>&AS_MESSAGE_LOG_FD]) -then - libc_cv_fno_stack_protector=yes -else - libc_cv_fno_stack_protector=no -fi -rm -f conftest*]) -if test $libc_cv_fno_stack_protector = yes; then - I386_CFLAGS="$I386_CFLAGS -fno-stack-protector" - IA64_CFLAGS="$IA64_CFLAGS -fno-stack-protector" - -fi -AC_SUBST(libc_cv_fno_stack_protector) - -AC_SUBST([HOST_CFLAGS]) - -AC_SUBST([I386_CC]) -AC_SUBST([I386_LD]) -AC_SUBST([I386_AS]) -AC_SUBST([I386_CPP]) -AC_SUBST([I386_OBJCOPY]) -AC_SUBST([I386_CFLAGS]) -AC_SUBST([I386_ASFLAGS]) -AC_SUBST([I386_LDFLAGS]) - -AC_SUBST([IA64_CC]) -AC_SUBST([IA64_LD]) -AC_SUBST([IA64_AS]) -AC_SUBST([IA64_CPP]) -AC_SUBST([IA64_OBJCOPY]) -AC_SUBST([IA64_CFLAGS]) -AC_SUBST([IA64_ASFLAGS]) -AC_SUBST([IA64_LDFLAGS]) - -dnl ---Output -AC_OUTPUT([Makefile.conf]) - - diff --git a/util/mkelfImage/include/elf.h b/util/mkelfImage/include/elf.h deleted file mode 100644 index c3f4103f3d..0000000000 --- a/util/mkelfImage/include/elf.h +++ /dev/null @@ -1,228 +0,0 @@ -#ifndef ELF_H -#define ELF_H - -#define EI_NIDENT 16 /* Size of e_ident array. */ - -/* Values for e_type. */ -#define ET_NONE 0 /* No file type */ -#define ET_REL 1 /* Relocatable file */ -#define ET_EXEC 2 /* Executable file */ -#define ET_DYN 3 /* Shared object file */ -#define ET_CORE 4 /* Core file */ - -/* Values for e_machine (architecute). */ -#define EM_NONE 0 /* No machine */ -#define EM_M32 1 /* AT&T WE 32100 */ -#define EM_SPARC 2 /* SUN SPARC */ -#define EM_386 3 /* Intel 80386+ */ -#define EM_68K 4 /* Motorola m68k family */ -#define EM_88K 5 /* Motorola m88k family */ -#define EM_486 6 /* Perhaps disused */ -#define EM_860 7 /* Intel 80860 */ -#define EM_MIPS 8 /* MIPS R3000 big-endian */ -#define EM_S370 9 /* IBM System/370 */ -#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */ - -#define EM_PARISC 15 /* HPPA */ -#define EM_VPP500 17 /* Fujitsu VPP500 */ -#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */ -#define EM_960 19 /* Intel 80960 */ -#define EM_PPC 20 /* PowerPC */ -#define EM_PPC64 21 /* PowerPC 64-bit */ -#define EM_S390 22 /* IBM S390 */ - -#define EM_V800 36 /* NEC V800 series */ -#define EM_FR20 37 /* Fujitsu FR20 */ -#define EM_RH32 38 /* TRW RH-32 */ -#define EM_RCE 39 /* Motorola RCE */ -#define EM_ARM 40 /* ARM */ -#define EM_FAKE_ALPHA 41 /* Digital Alpha */ -#define EM_SH 42 /* Hitachi SH */ -#define EM_SPARCV9 43 /* SPARC v9 64-bit */ -#define EM_TRICORE 44 /* Siemens Tricore */ -#define EM_ARC 45 /* Argonaut RISC Core */ -#define EM_H8_300 46 /* Hitachi H8/300 */ -#define EM_H8_300H 47 /* Hitachi H8/300H */ -#define EM_H8S 48 /* Hitachi H8S */ -#define EM_H8_500 49 /* Hitachi H8/500 */ -#define EM_IA_64 50 /* Intel Merced */ -#define EM_MIPS_X 51 /* Stanford MIPS-X */ -#define EM_COLDFIRE 52 /* Motorola Coldfire */ -#define EM_68HC12 53 /* Motorola M68HC12 */ -#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/ -#define EM_PCP 55 /* Siemens PCP */ -#define EM_NCPU 56 /* Sony nCPU embeeded RISC */ -#define EM_NDR1 57 /* Denso NDR1 microprocessor */ -#define EM_STARCORE 58 /* Motorola Start*Core processor */ -#define EM_ME16 59 /* Toyota ME16 processor */ -#define EM_ST100 60 /* STMicroelectronic ST100 processor */ -#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/ -#define EM_X86_64 62 /* AMD x86-64 architecture */ -#define EM_PDSP 63 /* Sony DSP Processor */ - -#define EM_FX66 66 /* Siemens FX66 microcontroller */ -#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */ -#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */ -#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */ -#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */ -#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */ -#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */ -#define EM_SVX 73 /* Silicon Graphics SVx */ -#define EM_AT19 74 /* STMicroelectronics ST19 8 bit mc */ -#define EM_VAX 75 /* Digital VAX */ -#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */ -#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */ -#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */ -#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */ -#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */ -#define EM_HUANY 81 /* Harvard University machine-independent object files */ -#define EM_PRISM 82 /* SiTera Prism */ -#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */ -#define EM_FR30 84 /* Fujitsu FR30 */ -#define EM_D10V 85 /* Mitsubishi D10V */ -#define EM_D30V 86 /* Mitsubishi D30V */ -#define EM_V850 87 /* NEC v850 */ -#define EM_M32R 88 /* Mitsubishi M32R */ -#define EM_MN10300 89 /* Matsushita MN10300 */ -#define EM_MN10200 90 /* Matsushita MN10200 */ -#define EM_PJ 91 /* picoJava */ -#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ -#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */ -#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ -#define EM_NUM 95 - -#define EM_AARCH64 183 /* ARM Aarch64 Architecture */ - -/* Values for p_type. */ -#define PT_NULL 0 /* Unused entry. */ -#define PT_LOAD 1 /* Loadable segment. */ -#define PT_DYNAMIC 2 /* Dynamic linking information segment. */ -#define PT_INTERP 3 /* Pathname of interpreter. */ -#define PT_NOTE 4 /* Auxiliary information. */ -#define PT_SHLIB 5 /* Reserved (not used). */ -#define PT_PHDR 6 /* Location of program header itself. */ - -/* Values for p_flags. */ -#define PF_X 0x1 /* Executable. */ -#define PF_W 0x2 /* Writable. */ -#define PF_R 0x4 /* Readable. */ - - -#define ELF_PROGRAM_RETURNS_BIT 0x8000000 /* e_flags bit 31 */ - -#define EI_MAG0 0 -#define ELFMAG0 0x7f - -#define EI_MAG1 1 -#define ELFMAG1 'E' - -#define EI_MAG2 2 -#define ELFMAG2 'L' - -#define EI_MAG3 3 -#define ELFMAG3 'F' - -#define ELFMAG "\177ELF" - -#define EI_CLASS 4 /* File class byte index */ -#define ELFCLASSNONE 0 /* Invalid class */ -#define ELFCLASS32 1 /* 32-bit objects */ -#define ELFCLASS64 2 /* 64-bit objects */ - -#define EI_DATA 5 /* Data encodeing byte index */ -#define ELFDATANONE 0 /* Invalid data encoding */ -#define ELFDATA2LSB 1 /* 2's complement little endian */ -#define ELFDATA2MSB 2 /* 2's complement big endian */ - -#define EI_VERSION 6 /* File version byte index */ - /* Value must be EV_CURRENT */ - -#define EV_NONE 0 /* Invalid ELF Version */ -#define EV_CURRENT 1 /* Current version */ - -#define ELF32_PHDR_SIZE (8*4) /* Size of an elf program header */ - -#ifndef ASSEMBLY -/* - * ELF definitions common to all 32-bit architectures. - */ - -typedef uint32_t Elf32_Addr; -typedef uint16_t Elf32_Half; -typedef uint32_t Elf32_Off; -typedef int32_t Elf32_Sword; -typedef uint32_t Elf32_Word; -typedef uint32_t Elf32_Size; - -typedef uint64_t Elf64_Addr; -typedef uint16_t Elf64_Half; -typedef uint64_t Elf64_Off; -typedef int32_t Elf64_Sword; -typedef uint32_t Elf64_Word; -typedef uint64_t Elf64_Size; - -/* - * ELF header. - */ -typedef struct { - unsigned char e_ident[EI_NIDENT]; /* File identification. */ - Elf32_Half e_type; /* File type. */ - Elf32_Half e_machine; /* Machine architecture. */ - Elf32_Word e_version; /* ELF format version. */ - Elf32_Addr e_entry; /* Entry point. */ - Elf32_Off e_phoff; /* Program header file offset. */ - Elf32_Off e_shoff; /* Section header file offset. */ - Elf32_Word e_flags; /* Architecture-specific flags. */ - Elf32_Half e_ehsize; /* Size of ELF header in bytes. */ - Elf32_Half e_phentsize; /* Size of program header entry. */ - Elf32_Half e_phnum; /* Number of program header entries. */ - Elf32_Half e_shentsize; /* Size of section header entry. */ - Elf32_Half e_shnum; /* Number of section header entries. */ - Elf32_Half e_shstrndx; /* Section name strings section. */ -} Elf32_Ehdr; - -typedef struct { - unsigned char e_ident[EI_NIDENT]; /* File identification. */ - Elf64_Half e_type; /* File type. */ - Elf64_Half e_machine; /* Machine architecture. */ - Elf64_Word e_version; /* ELF format version. */ - Elf64_Addr e_entry; /* Entry point. */ - Elf64_Off e_phoff; /* Program header file offset. */ - Elf64_Off e_shoff; /* Section header file offset. */ - Elf64_Word e_flags; /* Architecture-specific flags. */ - Elf64_Half e_ehsize; /* Size of ELF header in bytes. */ - Elf64_Half e_phentsize; /* Size of program header entry. */ - Elf64_Half e_phnum; /* Number of program header entries. */ - Elf64_Half e_shentsize; /* Size of section header entry. */ - Elf64_Half e_shnum; /* Number of section header entries. */ - Elf64_Half e_shstrndx; /* Section name strings section. */ -} Elf64_Ehdr; - -/* - * Program header. - */ -typedef struct { - Elf32_Word p_type; /* Entry type. */ - Elf32_Off p_offset; /* File offset of contents. */ - Elf32_Addr p_vaddr; /* Virtual address (not used). */ - Elf32_Addr p_paddr; /* Physical address. */ - Elf32_Size p_filesz; /* Size of contents in file. */ - Elf32_Size p_memsz; /* Size of contents in memory. */ - Elf32_Word p_flags; /* Access permission flags. */ - Elf32_Size p_align; /* Alignment in memory and file. */ -} Elf32_Phdr; - -typedef struct { - Elf64_Word p_type; /* Entry type. */ - Elf64_Word p_flags; /* Access permission flags. */ - Elf64_Off p_offset; /* File offset of contents. */ - Elf64_Addr p_vaddr; /* Virtual address (not used). */ - Elf64_Addr p_paddr; /* Physical address. */ - Elf64_Size p_filesz; /* Size of contents in file. */ - Elf64_Size p_memsz; /* Size of contents in memory. */ - Elf64_Size p_align; /* Alignment in memory and file. */ -} Elf64_Phdr; - -#endif /* ASSEMBLY */ - -#endif /* ELF_H */ diff --git a/util/mkelfImage/include/elf_boot.h b/util/mkelfImage/include/elf_boot.h deleted file mode 100644 index 41c4c72d6e..0000000000 --- a/util/mkelfImage/include/elf_boot.h +++ /dev/null @@ -1,105 +0,0 @@ -#ifndef ELF_BOOT_H -#define ELF_BOOT_H - - -/* This defines the structure of a table of parameters useful for ELF - * bootable images. These parameters are all passed and generated - * by the bootloader to the booted image. For simplicity and - * consistency the Elf Note format is reused. - * - * All of the information must be Position Independent Data. - * That is it must be safe to relocate the whole ELF boot parameter - * block without changing the meaning or correctnes of the data. - * Additionally it must be safe to permute the order of the ELF notes - * to any possible permutation without changing the meaning or correctness - * of the data. - * - */ - -#define ELF_BHDR_MAGIC 0x0E1FB007 - -#ifndef ASSEMBLY -#include <stdint.h> -typedef uint16_t Elf_Half; -typedef uint32_t Elf_Word; - -/* - * Elf boot notes... - */ - -typedef struct Elf_Bhdr -{ - Elf_Word b_signature; /* "0x0E1FB007" */ - Elf_Word b_size; - Elf_Half b_checksum; - Elf_Half b_records; -} Elf_Bhdr; - -/* - * ELF Notes. - */ - -typedef struct Elf_Nhdr -{ - Elf_Word n_namesz; /* Length of the note's name. */ - Elf_Word n_descsz; /* Length of the note's descriptor. */ - Elf_Word n_type; /* Type of the note. */ -} Elf_Nhdr; - -#endif /* ASSEMBLY */ - -/* Standardized Elf image notes for booting... The name for all of these is ELFBoot */ -#define ELF_NOTE_BOOT "ELFBoot" - -#define EIN_PROGRAM_NAME 0x00000001 -/* The program in this ELF file */ -#define EIN_PROGRAM_VERSION 0x00000002 -/* The version of the program in this ELF file */ -#define EIN_PROGRAM_CHECKSUM 0x00000003 -/* ip style checksum of the memory image. */ - - -/* Linux image notes for booting... The name for all of these is Linux */ - -#define LIN_COMMAND_LINE 0x00000001 -/* The command line to pass to the loaded kernel. */ -#define LIN_ROOT_DEV 0x00000002 -/* The root dev to pass to the loaded kernel. */ -#define LIN_RAMDISK_FLAGS 0x00000003 -/* Various old ramdisk flags */ -#define LIN_INITRD_START 0x00000004 -/* Start of the ramdisk in bytes */ -#define LIN_INITRD_SIZE 0x00000005 -/* Size of the ramdisk in bytes */ - -/* Notes that are passed to a loaded image */ -/* For the standard elf boot notes n_namesz must be zero */ -#define EBN_FIRMWARE_TYPE 0x00000001 -/* ASCIZ name of the platform firmware. */ -#define EBN_BOOTLOADER_NAME 0x00000002 -/* This specifies just the ASCIZ name of the bootloader */ -#define EBN_BOOTLOADER_VERSION 0x00000003 -/* This specifies the version of the bootloader as an ASCIZ string */ -#define EBN_COMMAND_LINE 0x00000004 -/* This specifies a command line that can be set by user interaction, - * and is provided as a free form ASCIZ string to the loaded image. - */ -#define EBN_NOP 0x00000005 -/* A note nop note has no meaning, useful for inserting explicit padding */ -#define EBN_LOADED_IMAGE 0x00000006 -/* An ASCIZ string naming the loaded image */ - - -/* Etherboot specific notes */ -#define EB_PARAM_NOTE "Etherboot" -#define EB_IA64_SYSTAB 0x00000001 -#define EB_IA64_MEMMAP 0x00000002 -#define EB_IA64_FPSWA 0x00000003 -#define EB_IA64_CONINFO 0x00000004 -#define EB_BOOTP_DATA 0x00000005 -#define EB_HEADER 0x00000006 -#define EB_IA64_IMAGE_HANDLE 0x00000007 -#define EB_I386_MEMMAP 0x00000008 - - -#endif /* ELF_BOOT_H */ diff --git a/util/mkelfImage/include/linuxbios_tables.h b/util/mkelfImage/include/linuxbios_tables.h deleted file mode 100644 index 75464fdd9e..0000000000 --- a/util/mkelfImage/include/linuxbios_tables.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef LINUXBIOS_TABLES_H -#define LINUXBIOS_TABLES_H - -#include <stdint.h> - -/* The linuxbios table information is for conveying information - * from the firmware to the loaded OS image. Primarily this - * is expected to be information that cannot be discovered by - * other means, such as quering the hardware directly. - * - * All of the information should be Position Independent Data. - * That is it should be safe to relocated any of the information - * without it's meaning/correctnes changing. For table that - * can reasonably be used on multiple architectures the data - * size should be fixed. This should ease the transition between - * 32 bit and 64 bit architectures etc. - * - * The completeness test for the information in this table is: - * - Can all of the hardware be detected? - * - Are the per motherboard constants available? - * - Is there enough to allow a kernel to run that was written before - * a particular motherboard is constructed? (Assuming the kernel - * has drivers for all of the hardware but it does not have - * assumptions on how the hardware is connected together). - * - * With this test it should be straight forward to determine if a - * table entry is required or not. This should remove much of the - * long term compatibility burden as table entries which are - * irrelevant or have been replaced by better alternatives may be - * dropped. Of course it is polite and expidite to include extra - * table entries and be backwards compatible, but it is not required. - */ - - -struct lb_header -{ - uint8_t signature[4]; /* LBIO */ - uint32_t header_bytes; - uint32_t header_checksum; - uint32_t table_bytes; - uint32_t table_checksum; - uint32_t table_entries; -}; - -/* Every entry in the boot enviroment list will correspond to a boot - * info record. Encoding both type and size. The type is obviously - * so you can tell what it is. The size allows you to skip that - * boot enviroment record if you don't know what it easy. This allows - * forward compatibility with records not yet defined. - */ -struct lb_record { - uint32_t tag; /* tag ID */ - uint32_t size; /* size of record (in bytes) */ -}; - -#define LB_TAG_UNUSED 0x0000 - -#define LB_TAG_MEMORY 0x0001 - -struct lb_memory_range { - uint64_t start; - uint64_t size; - uint32_t type; -#define LB_MEM_RAM 1 -#define LB_MEM_RESERVED 2 - -}; - -struct lb_memory { - uint32_t tag; - uint32_t size; - struct lb_memory_range map[0]; -}; - -#define LB_TAG_HWRPB 0x0002 -struct lb_hwrpb { - uint32_t tag; - uint32_t size; - uint64_t hwrpb; -}; - -#define LB_TAG_FORWARD 0x0011 -struct lb_forward { - uint32_t tag; - uint32_t size; - uint64_t forward; -}; - - - -#endif /* LINUXBIOS_TABLES_H */ diff --git a/util/mkelfImage/include/mkelfImage.h b/util/mkelfImage/include/mkelfImage.h deleted file mode 100644 index db1d356c86..0000000000 --- a/util/mkelfImage/include/mkelfImage.h +++ /dev/null @@ -1,125 +0,0 @@ -#ifndef MKELFIMAGE_H -#define MKELFIMAGE_H - -#include <sys/types.h> -#include <stdint.h> -#include <byteswap.h> -#define USE_BSD -#include <endian.h> -#define _GNU_SOURCE - -struct memelfheader; -struct memelfphdr; -struct memelfnote; - -extern void die(char *fmt, ...); -extern void usage(void); -extern void error(char *fmt, ...); -extern uint16_t ipchksum(const void *data, unsigned long length); -extern uint16_t add_ipchksums(unsigned long offset, uint16_t sum, uint16_t new); -extern void *xmalloc(size_t size, const char *name); -extern void *xrealloc(void *ptr, size_t size, const char *name); -extern char *slurp_file(const char *filename, off_t *r_size); -extern char *slurp_decompress_file(const char *filename, off_t *r_size); -extern struct memelfphdr *add_program_headers(struct memelfheader *ehdr, int count); -extern struct memelfnote *add_notes(struct memelfheader *ehdr, int count); - -typedef char *(probe_t)(char *kernel_buf, off_t kernel_size); -typedef int (mkelf_t)(int argc, char **argv, - struct memelfheader *hdr, char *kernel_buf, off_t kernel_size); -typedef void (usage_t)(void); -struct file_type { - const char *name; - probe_t *probe; - mkelf_t *mkelf; - usage_t *usage; -}; - -#if BYTE_ORDER == LITTLE_ENDIAN -#define cpu_to_le16(val) (val) -#define cpu_to_le32(val) (val) -#define cpu_to_le64(val) (val) -#define cpu_to_be16(val) bswap_16(val) -#define cpu_to_be32(val) bswap_32(val) -#define cpu_to_be64(val) bswap_64(val) -#define le16_to_cpu(val) (val) -#define le32_to_cpu(val) (val) -#define le64_to_cpu(val) (val) -#define be16_to_cpu(val) bswap_16(val) -#define be32_to_cpu(val) bswap_32(val) -#define be64_to_cpu(val) bswap_64(val) -#endif -#if BYTE_ORDER == BIG_ENDIAN -#define cpu_to_le16(val) bswap_16(val) -#define cpu_to_le32(val) bswap_32(val) -#define cpu_to_le64(val) bswap_64(val) -#define cpu_to_be16(val) (val) -#define cpu_to_be32(val) (val) -#define cpu_to_be64(val) (val) -#define le16_to_cpu(val) bswap_16(val) -#define le32_to_cpu(val) bswap_32(val) -#define le64_to_cpu(val) bswap_64(val) -#define be16_to_cpu(val) (val) -#define be32_to_cpu(val) (val) -#define be64_to_cpu(val) (val) -#endif - -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) - -struct memelfheader { - unsigned ei_class; - unsigned ei_data; - unsigned e_type; - unsigned e_machine; - unsigned e_flags; - unsigned e_phnum; - unsigned e_notenum; - unsigned long e_entry; - struct memelfphdr *e_phdr; - struct memelfnote *e_notes; -}; - -struct memelfphdr { - uint64_t p_vaddr; - uint64_t p_paddr; - uint64_t p_filesz; - uint64_t p_memsz; - void *p_data; - unsigned p_type; - unsigned p_flags; -}; - -struct memelfnote { - unsigned n_type; - char *n_name; - void *n_desc; - unsigned n_descsz; -}; - -#define OPT_HELP 'h' -#define OPT_VERSION 'v' -#define OPT_TYPE 't' -#define OPT_KERNEL 256 -#define OPT_OUTPUT 257 -#define OPT_MAX 258 - -#define MKELF_OPTIONS \ - { "help", 0, 0, OPT_HELP }, \ - { "version", 0, 0, OPT_VERSION }, \ - { "kernel", 1, 0, OPT_KERNEL }, \ - { "output", 1, 0, OPT_OUTPUT }, \ - { "type", 1, 0, OPT_TYPE }, - -#define MKELF_OPT_STR "hvt:" - -extern probe_t vmlinux_i386_probe; -extern probe_t bzImage_i386_probe; -extern probe_t linux_i386_probe; -extern mkelf_t linux_i386_mkelf; -extern usage_t linux_i386_usage; - -extern probe_t linux_ia64_probe; -extern mkelf_t linux_ia64_mkelf; -extern usage_t linux_ia64_usage; - -#endif /* MKELFIMAGE_H */ diff --git a/util/mkelfImage/kunzip_src/arch/alpha/include/stddef.h b/util/mkelfImage/kunzip_src/arch/alpha/include/stddef.h deleted file mode 100644 index 37ee13858a..0000000000 --- a/util/mkelfImage/kunzip_src/arch/alpha/include/stddef.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ALPHA_STDDEF_H -#define ALPHA_STDDEF_H - -typedef long ptrdiff_t; -typedef unsigned long size_t; -typedef long ssize_t; - -typedef int wchar_t; -typedef unsigned int wint_t; - -#define NULL 0 - -#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) - -#endif /* ALPHA_STDDEF_H */ diff --git a/util/mkelfImage/kunzip_src/arch/alpha/include/stdint.h b/util/mkelfImage/kunzip_src/arch/alpha/include/stdint.h deleted file mode 100644 index 9da5cc4972..0000000000 --- a/util/mkelfImage/kunzip_src/arch/alpha/include/stdint.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef ALPHA_STDINT_H -#define ALPHA_STDINT_H - -/* Exact integral types */ -typedef unsigned char uint8_t; -typedef signed char int8_t; - -typedef unsigned short uint16_t; -typedef signed short int16_t; - -typedef unsigned int uint32_t; -typedef signed int int32_t; - -typedef unsigned long uint64_t; -typedef signed long int64_t; - - -/* Small types */ -typedef unsigned char uint_least8_t; -typedef signed char int_least8_t; - -typedef unsigned short uint_least16_t; -typedef signed short int_least16_t; - -typedef unsigned int uint_least32_t; -typedef signed int int_least32_t; - -typedef unsigned long uint_least64_t; -typedef signed long int_least64_t; - -/* Fast Types */ -typedef unsigned char uint_fast8_t; -typedef signed char int_fast8_t; - -typedef unsigned long uint_fast16_t; -typedef signed long int_fast16_t; - -typedef unsigned long uint_fast32_t; -typedef signed long int_fast32_t; - -typedef unsigned long uint_fast64_t; -typedef signed long int_fast64_t; - -/* Types for `void *' pointers. */ -typedef long intptr_t; -typedef unsigned long uintptr_t; - -/* Largest integral types */ -typedef long intmax_t; -typedef unsigned long uintmax_t; - - -#endif /* ALPHA_STDINT_H */ diff --git a/util/mkelfImage/kunzip_src/arch/alpha/include/va-alpha.h b/util/mkelfImage/kunzip_src/arch/alpha/include/va-alpha.h deleted file mode 100644 index 2528a712ad..0000000000 --- a/util/mkelfImage/kunzip_src/arch/alpha/include/va-alpha.h +++ /dev/null @@ -1,128 +0,0 @@ -/* GNU C varargs and stdargs support for the DEC Alpha. */ - -/* Note: We must use the name __builtin_savregs. GCC attaches special - significance to that name. In particular, regardless of where in a - function __builtin_saveregs is called, GCC moves the call up to the - very start of the function. */ - -/* Define __gnuc_va_list. */ - -#ifndef __GNUC_VA_LIST -#define __GNUC_VA_LIST - -/* In VMS, __gnuc_va_list is simply char *; on OSF, it's a structure. */ - -#ifdef __VMS__ -typedef char *__gnuc_va_list; -#else - -typedef struct { - char *__base; /* Pointer to first integer register. */ - int __offset; /* Byte offset of args so far. */ -} __gnuc_va_list; -#endif - -#endif /* __GNUC_VA_LIST */ - -/* If this is for internal libc use, don't define anything but - __gnuc_va_list. */ - -#if !defined(__GNUC_VA_LIST_1) && (defined (_STDARG_H) || defined (_VARARGS_H)) -#define __GNUC_VA_LIST_1 - -#define _VA_LIST -#define _VA_LIST_ - -typedef __gnuc_va_list va_list; - -#if !defined(_STDARG_H) - -/* varargs support */ -#define va_alist __builtin_va_alist -#define va_dcl int __builtin_va_alist;... -#ifdef __VMS__ -#define va_start(pvar) ((pvar) = __builtin_saveregs ()) -#else -#define va_start(pvar) ((pvar) = * (__gnuc_va_list *) __builtin_saveregs ()) -#endif - -#else /* STDARG.H */ - -/* ANSI alternative. */ - -/* Call __builtin_next_arg even though we aren't using its value, so that - we can verify that firstarg is correct. */ - -#ifdef __VMS__ -#define va_start(pvar, firstarg) \ - (__builtin_next_arg (firstarg), \ - (pvar) = __builtin_saveregs ()) -#else -#define va_start(pvar, firstarg) \ - (__builtin_next_arg (firstarg), \ - (pvar) = *(__gnuc_va_list *) __builtin_saveregs ()) -#endif - -#endif /* _STDARG_H */ - -#define va_end(__va) ((void) 0) - -/* Values returned by __builtin_classify_type. */ - -enum { - __no_type_class = -1, - __void_type_class, - __integer_type_class, - __char_type_class, - __enumeral_type_class, - __boolean_type_class, - __pointer_type_class, - __reference_type_class, - __offset_type_class, - __real_type_class, - __complex_type_class, - __function_type_class, - __method_type_class, - __record_type_class, - __union_type_class, - __array_type_class, - __string_type_class, - __set_type_class, - __file_type_class, - __lang_type_class -}; - -/* Note that parameters are always aligned at least to a word boundary - (when passed) regardless of what GCC's __alignof__ operator says. */ - -/* Avoid errors if compiling GCC v2 with GCC v1. */ -#if __GNUC__ == 1 -#define __extension__ -#endif - -/* Get the size of a type in bytes, rounded up to an integral number - of words. */ - -#define __va_tsize(__type) \ - (((sizeof (__type) + __extension__ sizeof (long long) - 1) \ - / __extension__ sizeof (long long)) * __extension__ sizeof (long long)) - -#ifdef __VMS__ -#define va_arg(__va, __type) \ -(*(((__va) += __va_tsize (__type)), \ - (__type *)(void *)((__va) - __va_tsize (__type)))) - -#else - -#define va_arg(__va, __type) \ -(*(((__va).__offset += __va_tsize (__type)), \ - (__type *)(void *)((__va).__base + (__va).__offset \ - - (((__builtin_classify_type (* (__type *) 0) \ - == __real_type_class) && (__va).__offset <= (6 * 8)) \ - ? (6 * 8) + 8 : __va_tsize (__type))))) -#endif - -/* Copy __gnuc_va_list into another variable of this type. */ -#define __va_copy(dest, src) (dest) = (src) - -#endif /* __GNUC_VA_LIST_1 */ diff --git a/util/mkelfImage/kunzip_src/arch/alpha/lib/Makefile b/util/mkelfImage/kunzip_src/arch/alpha/lib/Makefile deleted file mode 100644 index 2fd15b06a0..0000000000 --- a/util/mkelfImage/kunzip_src/arch/alpha/lib/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -ARCH_OPTIONS= - -OBJECTS += __divqu.o __remqu.o __divlu.o __remlu.o - -$(OBJDIR)/__divqu.o: $(SRC)/arch/alpha/lib/divide.S - $(CC) $(CFLAGS) -DDIV -c -o $@ $^ - -$(OBJDIR)/__remqu.o: $(SRC)/arch/alpha/lib/divide.S - $(CC) $(CFLAGS) -DREM -c -o $@ $^ - -$(OBJDIR)/__divlu.o: $(SRC)/arch/alpha/lib/divide.S - $(CC) $(CFLAGS) -DDIV -DINTSIZE -c -o $@ $^ - -$(OBJDIR)/__remlu.o: $(SRC)/arch/alpha/lib/divide.S - $(CC) $(CFLAGS) -DREM -DINTSIZE -c -o $@ $^ - - diff --git a/util/mkelfImage/kunzip_src/arch/alpha/lib/divide.S b/util/mkelfImage/kunzip_src/arch/alpha/lib/divide.S deleted file mode 100644 index 863e881348..0000000000 --- a/util/mkelfImage/kunzip_src/arch/alpha/lib/divide.S +++ /dev/null @@ -1,195 +0,0 @@ -/* - * cpu/ev6/divide.S - * - * (C) 1995 Linus Torvalds - * - * Alpha division.. - */ - -/* - * The alpha chip doesn't provide hardware division, so we have to do it - * by hand. The compiler expects the functions - * - * __divqu: 64-bit unsigned long divide - * __remqu: 64-bit unsigned long remainder - * __divqs/__remqs: signed 64-bit - * __divlu/__remlu: unsigned 32-bit - * __divls/__remls: signed 32-bit - * - * These are not normal C functions: instead of the normal - * calling sequence, these expect their arguments in registers - * $24 and $25, and return the result in $27. Register $28 may - * be clobbered (assembly temporary), anything else must be saved. - * - * In short: painful. - * - * This is a rather simple bit-at-a-time algorithm: it's very good - * at dividing random 64-bit numbers, but the more usual case where - * the divisor is small is handled better by the DEC algorithm - * using lookup tables. This uses much less memory, though, and is - * nicer on the cache.. Besides, I don't know the copyright status - * of the DEC code. - */ - -/* - * My temporaries: - * $0 - current bit - * $1 - shifted divisor - * $2 - modulus/quotient - * - * $23 - return address - * $24 - dividend - * $25 - divisor - * - * $27 - quotient/modulus - * $28 - compare status - */ - -#define halt .long 0 - -/* - * Select function type and registers - */ -#define mask $0 -#define divisor $1 -#define compare $28 -#define tmp1 $3 -#define tmp2 $4 - -#ifdef DIV -#define DIV_ONLY(x,y...) x,##y -#define MOD_ONLY(x,y...) -#define func(x) __div##x -#define modulus $2 -#define quotient $27 -#define GETSIGN(x) xor $24,$25,x -#define STACK 48 -#else -#define DIV_ONLY(x,y...) -#define MOD_ONLY(x,y...) x,##y -#define func(x) __rem##x -#define modulus $27 -#define quotient $2 -#define GETSIGN(x) bis $24,$24,x -#define STACK 32 -#endif - -/* - * For 32-bit operations, we need to extend to 64-bit - */ -#ifdef INTSIZE -#define ufunction func(lu) -#define sfunction func(l) -#define LONGIFY(x) zapnot x,15,x -#define SLONGIFY(x) addl x,0,x -#else -#define ufunction func(qu) -#define sfunction func(q) -#define LONGIFY(x) -#define SLONGIFY(x) -#endif - -.set noat -.align 3 -.globl ufunction -.ent ufunction -ufunction: - subq $30,STACK,$30 - .frame $30,STACK,$23 - .prologue 0 - -7: stq $1, 0($30) - bis $25,$25,divisor - stq $2, 8($30) - bis $24,$24,modulus - stq $0,16($30) - bis $31,$31,quotient - LONGIFY(divisor) - stq tmp1,24($30) - LONGIFY(modulus) - bis $31,1,mask - DIV_ONLY(stq tmp2,32($30)) - beq divisor, 9f /* div by zero */ - -#ifdef INTSIZE - /* - * shift divisor left, using 3-bit shifts for - * 32-bit divides as we can't overflow. Three-bit - * shifts will result in looping three times less - * here, but can result in two loops more later. - * Thus using a large shift isn't worth it (and - * s8add pairs better than a sll..) - */ -1: cmpult divisor,modulus,compare - s8addq divisor,$31,divisor - s8addq mask,$31,mask - bne compare,1b -#else -1: cmpult divisor,modulus,compare - blt divisor, 2f - addq divisor,divisor,divisor - addq mask,mask,mask - bne compare,1b - unop -#endif - - /* ok, start to go right again.. */ -2: DIV_ONLY(addq quotient,mask,tmp2) - srl mask,1,mask - cmpule divisor,modulus,compare - subq modulus,divisor,tmp1 - DIV_ONLY(cmovne compare,tmp2,quotient) - srl divisor,1,divisor - cmovne compare,tmp1,modulus - bne mask,2b - -9: ldq $1, 0($30) - ldq $2, 8($30) - ldq $0,16($30) - ldq tmp1,24($30) - DIV_ONLY(ldq tmp2,32($30)) - addq $30,STACK,$30 - ret $31,($23),1 - .end ufunction - -/* - * Uhh.. Ugly signed division. I'd rather not have it at all, but - * it's needed in some circumstances. There are different ways to - * handle this, really. This does: - * -a / b = a / -b = -(a / b) - * -a % b = -(a % b) - * a % -b = a % b - * which is probably not the best solution, but at least should - * have the property that (x/y)*y + (x%y) = x. - */ -.align 3 -.globl sfunction -.ent sfunction -sfunction: - subq $30,STACK,$30 - .frame $30,STACK,$23 - .prologue 0 - bis $24,$25,$28 - SLONGIFY($28) - bge $28,7b - stq $24,0($30) - subq $31,$24,$28 - stq $25,8($30) - cmovlt $24,$28,$24 /* abs($24) */ - stq $23,16($30) - subq $31,$25,$28 - stq tmp1,24($30) - cmovlt $25,$28,$25 /* abs($25) */ - unop - bsr $23,ufunction - ldq $24,0($30) - ldq $25,8($30) - GETSIGN($28) - subq $31,$27,tmp1 - SLONGIFY($28) - ldq $23,16($30) - cmovlt $28,tmp1,$27 - ldq tmp1,24($30) - addq $30,STACK,$30 - ret $31,($23),1 - .end sfunction diff --git a/util/mkelfImage/kunzip_src/arch/alpha/lib/kunzip.lds b/util/mkelfImage/kunzip_src/arch/alpha/lib/kunzip.lds deleted file mode 100644 index 467e64d100..0000000000 --- a/util/mkelfImage/kunzip_src/arch/alpha/lib/kunzip.lds +++ /dev/null @@ -1,50 +0,0 @@ -PAGE_SIZE = 65536; -BASIC_ALIGN = 8; -OUTPUT_FORMAT("elf64-alpha") -ENTRY(__start) -SECTIONS -{ - . = PAGE_SIZE; - _start = .; - /* - * First we place the code and read only data (typically const declared). - * This get placed in rom. - */ - .text : { - _text = .; - *(.text) - _etext = .; - _rodata = .; - *(.rodata); - _erodata = .; - } - /* Global data */ - .data : { - _data = .; - *(.data) - CONSTRUCTORS - *(.got) - *(.sdata) - _edata = .; - } - - /* Important align _bss so bss may be zeroed with quadword access */ - . = ALIGN(BASIC_ALIGN); - .bss : { - _bss = .; - *(.sbss) - *(.scommon) - *(.bss) - *(COMMON) - *(.heap) - *(.stack) - /* Important align _ebss so bss may be zeroed with quadword access */ - . = ALIGN(BASIC_ALIGN); - _ebss = .; - } - _end = .; - - /DISCARD/ : { - *(*) - } -} diff --git a/util/mkelfImage/kunzip_src/arch/alpha/lib/start.S b/util/mkelfImage/kunzip_src/arch/alpha/lib/start.S deleted file mode 100644 index a89f4ca6de..0000000000 --- a/util/mkelfImage/kunzip_src/arch/alpha/lib/start.S +++ /dev/null @@ -1,89 +0,0 @@ -.set noat -.set noreorder -.text - -__original_registers: - .quad 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - -__entry: - .quad entry - -.globl __start -__start: - br $27, __save_registers -__save_registers: - lda $27, (__original_registers - __save_registers)($27) - stq $0, 0($27) - stq $1, 8($27) - stq $2, 16($27) - stq $3, 24($27) - stq $4, 32($27) - stq $5, 40($27) - stq $6, 48($27) - stq $7, 56($27) - stq $8, 64($27) - stq $9, 72($27) - stq $10, 80($27) - stq $11, 88($27) - stq $12, 96($27) - stq $13, 104($27) - stq $14, 112($27) - stq $15, 120($27) - stq $16, 128($27) - stq $17, 136($27) - stq $18, 144($27) - stq $19, 152($27) - stq $20, 160($27) - stq $21, 168($27) - stq $22, 176($27) - stq $23, 184($27) - stq $24, 192($27) - stq $25, 200($27) - stq $26, 208($27) - stq $28, 224($27) - stq $29, 232($27) - stq $30, 240($27) - -__normal_start: - ldgp $29, (__normal_start - __original_registers)($27) - lda $30, _estack - jsr $26, kunzip - -.globl jmp_to_program_entry -jmp_to_program_entry: - br $27, __restore_registers -__restore_registers: - lda $27,(__original_registers - __restore_registers)($27) - stq $16, (__entry - __original_registers)($27) - ldq $0, 0($27) - ldq $1, 8($27) - ldq $2, 16($27) - ldq $3, 24($27) - ldq $4, 32($27) - ldq $5, 40($27) - ldq $6, 48($27) - ldq $7, 56($27) - ldq $8, 64($27) - ldq $9, 72($27) - ldq $10, 80($27) - ldq $11, 88($27) - ldq $12, 96($27) - ldq $13, 104($27) - ldq $14, 112($27) - ldq $15, 120($27) - ldq $16, 128($27) - ldq $17, 136($27) - ldq $18, 144($27) - ldq $19, 152($27) - ldq $20, 160($27) - ldq $21, 168($27) - ldq $22, 176($27) - ldq $23, 184($27) - ldq $24, 192($27) - ldq $25, 200($27) - ldq $26, 208($27) - ldq $28, 224($27) - ldq $29, 232($27) - ldq $30, 240($27) - ldq $27, (__entry - __original_registers)($27) - jsr $31, ($27) diff --git a/util/mkelfImage/kunzip_src/arch/i386/include/stddef.h b/util/mkelfImage/kunzip_src/arch/i386/include/stddef.h deleted file mode 100644 index 88a3b48957..0000000000 --- a/util/mkelfImage/kunzip_src/arch/i386/include/stddef.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef I386_STDDEF_H -#define I386_STDDEF_H - -typedef long ptrdiff_t; -typedef unsigned long size_t; -typedef long ssize_t; - -typedef int wchar_t; -typedef unsigned int wint_t; - -#define NULL 0 - -#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) - -#endif I386_STDDEF_H diff --git a/util/mkelfImage/kunzip_src/arch/i386/include/stdint.h b/util/mkelfImage/kunzip_src/arch/i386/include/stdint.h deleted file mode 100644 index f24aab1294..0000000000 --- a/util/mkelfImage/kunzip_src/arch/i386/include/stdint.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef I386_STDINT_H -#define I386_STDINT_H - -/* Exact integral types */ -typedef unsigned char uint8_t; -typedef signed char int8_t; - -typedef unsigned short uint16_t; -typedef signed short int16_t; - -typedef unsigned int uint32_t; -typedef signed int int32_t; - -typedef unsigned long long uint64_t; -typedef signed long long int64_t; - -/* Small types */ -typedef unsigned char uint_least8_t; -typedef signed char int_least8_t; - -typedef unsigned short uint_least16_t; -typedef signed short int_least16_t; - -typedef unsigned int uint_least32_t; -typedef signed int int_least32_t; - -typedef unsigned long long uint_least64_t; -typedef signed long long int_least64_t; - -/* Fast Types */ -typedef unsigned char uint_fast8_t; -typedef signed char int_fast8_t; - -typedef unsigned int uint_fast16_t; -typedef signed int int_fast16_t; - -typedef unsigned int uint_fast32_t; -typedef signed int int_fast32_t; - -typedef unsigned long long uint_fast64_t; -typedef signed long long int_fast64_t; - -/* Types for `void *' pointers. */ -typedef int intptr_t; -typedef unsigned int uintptr_t; - -/* Largest integral types */ -typedef long long int intmax_t; -typedef unsigned long long uintmax_t; - - -#endif /* I386_STDINT_H */ diff --git a/util/mkelfImage/kunzip_src/arch/i386/lib/Makefile b/util/mkelfImage/kunzip_src/arch/i386/lib/Makefile deleted file mode 100644 index df2474d210..0000000000 --- a/util/mkelfImage/kunzip_src/arch/i386/lib/Makefile +++ /dev/null @@ -1 +0,0 @@ -ARCH_OPTIONS= diff --git a/util/mkelfImage/kunzip_src/arch/i386/lib/kunzip.lds b/util/mkelfImage/kunzip_src/arch/i386/lib/kunzip.lds deleted file mode 100644 index 4d95da42f5..0000000000 --- a/util/mkelfImage/kunzip_src/arch/i386/lib/kunzip.lds +++ /dev/null @@ -1,50 +0,0 @@ -PAGE_SIZE = 4096; -BASIC_ALIGN = 8; -OUTPUT_FORMAT("elf32-i386") -ENTRY(__start) -SECTIONS -{ - . = PAGE_SIZE; - _start = .; - /* - * First we place the code and read only data (typically const declared). - * This get placed in rom. - */ - .text : { - _text = .; - *(.text) - _etext = .; - _rodata = .; - *(.rodata); - _erodata = .; - } - /* Global data */ - .data : { - _data = .; - *(.data) - CONSTRUCTORS - *(.got) - *(.sdata) - _edata = .; - } - - /* Important align _bss so bss may be zeroed with quadword access */ - . = ALIGN(BASIC_ALIGN); - .bss : { - _bss = .; - *(.sbss) - *(.scommon) - *(.bss) - *(COMMON) - *(.heap) - *(.stack) - /* Important align _ebss so bss may be zeroed with quadword access */ - . = ALIGN(BASIC_ALIGN); - _ebss = .; - } - _end = .; - - /DISCARD/ : { - *(*) - } -} diff --git a/util/mkelfImage/kunzip_src/arch/i386/lib/start.S b/util/mkelfImage/kunzip_src/arch/i386/lib/start.S deleted file mode 100644 index 80ad476ae0..0000000000 --- a/util/mkelfImage/kunzip_src/arch/i386/lib/start.S +++ /dev/null @@ -1,35 +0,0 @@ -.text - -__original_registers: - .long 0, 0, 0, 0, 0, 0 , 0 , 0 -__entry: - .long entry - -.globl __start -__start: - movl %eax, 0+__original_registers - movl %ebx, 4+__original_registers - movl %ecx, 8+__original_registers - movl %edx, 12+__original_registers - movl %esi, 16+__original_registers - movl %edi, 20+__original_registers - movl %esp, 24+__original_registers - movl %ebp, 28+__original_registers - -__normal_start: - movl $_estack, %esp - call kunzip - -.globl jmp_to_program_entry -jmp_to_program_entry: - movl 4(%esp), %eax - movl %eax, __entry - movl 0+__original_registers, %eax - movl 4+__original_registers, %ebx - movl 8+__original_registers, %ecx - movl 12+__original_registers, %edx - movl 16+__original_registers, %esi - movl 20+__original_registers, %edi - movl 24+__original_registers, %esp - movl 28+__original_registers, %ebp - jmp *__entry diff --git a/util/mkelfImage/kunzip_src/include/stdarg.h b/util/mkelfImage/kunzip_src/include/stdarg.h deleted file mode 100644 index a3f1f2d587..0000000000 --- a/util/mkelfImage/kunzip_src/include/stdarg.h +++ /dev/null @@ -1,205 +0,0 @@ -/* stdarg.h for GNU. - Note that the type used in va_arg is supposed to match the - actual type **after default promotions**. - Thus, va_arg (..., short) is not valid. */ - -#ifndef _STDARG_H -#ifndef _ANSI_STDARG_H_ -#ifndef __need___va_list -#define _STDARG_H -#define _ANSI_STDARG_H_ -#endif /* not __need___va_list */ -#undef __need___va_list - -#ifdef __clipper__ -#include "va-clipper.h" -#else -#ifdef __m88k__ -#include "va-m88k.h" -#else -#ifdef __i860__ -#include "va-i860.h" -#else -#ifdef __hppa__ -#include "va-pa.h" -#else -#ifdef __mips__ -#include "va-mips.h" -#else -#ifdef __sparc__ -#include "va-sparc.h" -#else -#ifdef __i960__ -#include "va-i960.h" -#else -#ifdef __alpha__ -#include "va-alpha.h" -#else -#if defined (__H8300__) || defined (__H8300H__) || defined (__H8300S__) -#include "va-h8300.h" -#else -#if defined (__PPC__) && (defined (_CALL_SYSV) || defined (_WIN32)) -#include "va-ppc.h" -#else -#ifdef __arc__ -#include "va-arc.h" -#else -#ifdef __M32R__ -#include "va-m32r.h" -#else -#ifdef __sh__ -#include "va-sh.h" -#else -#ifdef __mn10300__ -#include "va-mn10300.h" -#else -#ifdef __mn10200__ -#include "va-mn10200.h" -#else -#ifdef __v850__ -#include "va-v850.h" -#else - -/* Define __gnuc_va_list. */ - -#ifndef __GNUC_VA_LIST -#define __GNUC_VA_LIST -#if defined(__svr4__) || defined(_AIX) || defined(_M_UNIX) || defined(__NetBSD__) -typedef char *__gnuc_va_list; -#else -typedef void *__gnuc_va_list; -#endif -#endif - -/* Define the standard macros for the user, - if this invocation was from the user program. */ -#ifdef _STDARG_H - -/* Amount of space required in an argument list for an arg of type TYPE. - TYPE may alternatively be an expression whose type is used. */ - -#if defined(sysV68) -#define __va_rounded_size(TYPE) \ - (((sizeof (TYPE) + sizeof (short) - 1) / sizeof (short)) * sizeof (short)) -#else -#define __va_rounded_size(TYPE) \ - (((sizeof (TYPE) + sizeof (int) - 1) / sizeof (int)) * sizeof (int)) -#endif - -#define va_start(AP, LASTARG) \ - (AP = ((__gnuc_va_list) __builtin_next_arg (LASTARG))) - -#undef va_end -void va_end (__gnuc_va_list); /* Defined in libgcc.a */ -#define va_end(AP) ((void)0) - -/* We cast to void * and then to TYPE * because this avoids - a warning about increasing the alignment requirement. */ - -#if (defined (__arm__) && ! defined (__ARMEB__)) || defined (__i386__) || defined (__i860__) || defined (__ns32000__) || defined (__vax__) -/* This is for little-endian machines; small args are padded upward. */ -#define va_arg(AP, TYPE) \ - (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)), \ - *((TYPE *) (void *) ((char *) (AP) - __va_rounded_size (TYPE)))) -#else /* big-endian */ -/* This is for big-endian machines; small args are padded downward. */ -#define va_arg(AP, TYPE) \ - (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)), \ - *((TYPE *) (void *) ((char *) (AP) \ - - ((sizeof (TYPE) < __va_rounded_size (char) \ - ? sizeof (TYPE) : __va_rounded_size (TYPE)))))) -#endif /* big-endian */ - -/* Copy __gnuc_va_list into another variable of this type. */ -#define __va_copy(dest, src) (dest) = (src) - -#endif /* _STDARG_H */ - -#endif /* not v850 */ -#endif /* not mn10200 */ -#endif /* not mn10300 */ -#endif /* not sh */ -#endif /* not m32r */ -#endif /* not arc */ -#endif /* not powerpc with V.4 calling sequence */ -#endif /* not h8300 */ -#endif /* not alpha */ -#endif /* not i960 */ -#endif /* not sparc */ -#endif /* not mips */ -#endif /* not hppa */ -#endif /* not i860 */ -#endif /* not m88k */ -#endif /* not clipper */ - -#ifdef _STDARG_H -/* Define va_list, if desired, from __gnuc_va_list. */ -/* We deliberately do not define va_list when called from - stdio.h, because ANSI C says that stdio.h is not supposed to define - va_list. stdio.h needs to have access to that data type, - but must not use that name. It should use the name __gnuc_va_list, - which is safe because it is reserved for the implementation. */ - -#ifdef _HIDDEN_VA_LIST /* On OSF1, this means varargs.h is "half-loaded". */ -#undef _VA_LIST -#endif - -#ifdef _BSD_VA_LIST -#undef _BSD_VA_LIST -#endif - -#if defined(__svr4__) || (defined(_SCO_DS) && !defined(__VA_LIST)) -/* SVR4.2 uses _VA_LIST for an internal alias for va_list, - so we must avoid testing it and setting it here. - SVR4 uses _VA_LIST as a flag in stdarg.h, but we should - have no conflict with that. */ -#ifndef _VA_LIST_ -#define _VA_LIST_ -#ifdef __i860__ -#ifndef _VA_LIST -#define _VA_LIST va_list -#endif -#endif /* __i860__ */ -typedef __gnuc_va_list va_list; -#ifdef _SCO_DS -#define __VA_LIST -#endif -#endif /* _VA_LIST_ */ -#else /* not __svr4__ || _SCO_DS */ - -/* The macro _VA_LIST_ is the same thing used by this file in Ultrix. - But on BSD NET2 we must not test or define or undef it. - (Note that the comments in NET 2's ansi.h - are incorrect for _VA_LIST_--see stdio.h!) */ -#if !defined (_VA_LIST_) || defined (__BSD_NET2__) || defined (____386BSD____) || defined (__bsdi__) || defined (__sequent__) || defined (__FreeBSD__) || defined(WINNT) -/* The macro _VA_LIST_DEFINED is used in Windows NT 3.5 */ -#ifndef _VA_LIST_DEFINED -/* The macro _VA_LIST is used in SCO Unix 3.2. */ -#ifndef _VA_LIST -/* The macro _VA_LIST_T_H is used in the Bull dpx2 */ -#ifndef _VA_LIST_T_H -typedef __gnuc_va_list va_list; -#endif /* not _VA_LIST_T_H */ -#endif /* not _VA_LIST */ -#endif /* not _VA_LIST_DEFINED */ -#if !(defined (__BSD_NET2__) || defined (____386BSD____) || defined (__bsdi__) || defined (__sequent__) || defined (__FreeBSD__)) -#define _VA_LIST_ -#endif -#ifndef _VA_LIST -#define _VA_LIST -#endif -#ifndef _VA_LIST_DEFINED -#define _VA_LIST_DEFINED -#endif -#ifndef _VA_LIST_T_H -#define _VA_LIST_T_H -#endif - -#endif /* not _VA_LIST_, except on certain systems */ - -#endif /* not __svr4__ */ - -#endif /* _STDARG_H */ - -#endif /* not _ANSI_STDARG_H_ */ -#endif /* not _STDARG_H */ diff --git a/util/mkelfImage/kunzip_src/include/stdlib.h b/util/mkelfImage/kunzip_src/include/stdlib.h deleted file mode 100644 index eb67d20fe7..0000000000 --- a/util/mkelfImage/kunzip_src/include/stdlib.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef STDLIB_H -#define STDLIB_H - -#include <stddef.h> - -extern void *malloc(size_t size); -void free(void *ptr); - -/* Extensions to malloc... */ -typedef size_t malloc_mark_t; -void malloc_mark(malloc_mark_t *place); -void malloc_release(malloc_mark_t *place); - -#endif /* STDLIB_H */ diff --git a/util/mkelfImage/kunzip_src/include/string.h b/util/mkelfImage/kunzip_src/include/string.h deleted file mode 100644 index fa301c822e..0000000000 --- a/util/mkelfImage/kunzip_src/include/string.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef STRING_H -#define STRING_H - -#include <stddef.h> - -// yes, linux has fancy ones. We don't care. This stuff gets used -// hardly at all. And the pain of including those files is just too high. - -//extern inline void strcpy(char *dst, char *src) {while (*src) *dst++ = *src++;} - -//extern inline int strlen(char *src) { int i = 0; while (*src++) i++; return i;} - -static inline size_t strnlen(const char *src, size_t max) { - int i = 0; - if (max<0) { - while (*src++) - i++; - return i; - } - else { - while ((*src++) && (i < max)) - i++; - return i; - } -} - -extern void *memcpy(void *dest, const void *src, size_t n); -extern void *memset(void *s, int c, size_t n); -extern int memcmp(const void *s1, const void *s2, size_t n); - -#endif /* STRING_H */ diff --git a/util/mkelfImage/kunzip_src/include/types.h b/util/mkelfImage/kunzip_src/include/types.h deleted file mode 100644 index 4b9dadfe55..0000000000 --- a/util/mkelfImage/kunzip_src/include/types.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef TYPES_H -#define TYPES_H - -#include <stdint.h> -#include <stddef.h> - -typedef uint8_t u8; -typedef int8_t s8; -typedef uint16_t u16; -typedef int16_t s16; -typedef uint32_t u32; -typedef int32_t s32; -typedef uint64_t u64; -typedef int64_t s64; - -/* FIXME is BITS_PER_LONG needed? */ - -#endif diff --git a/util/mkelfImage/kunzip_src/lib/inflate.c b/util/mkelfImage/kunzip_src/lib/inflate.c deleted file mode 100644 index 82818a6d53..0000000000 --- a/util/mkelfImage/kunzip_src/lib/inflate.c +++ /dev/null @@ -1,1178 +0,0 @@ -#define DEBG(x) -#define DEBG1(x) -/* Taken from /usr/src/linux/lib/inflate.c [unmodified] - Used for start32, 1/11/2000 - James Hendricks, Dale Webster */ - -/* inflate.c -- Not copyrighted 1992 by Mark Adler - version c10p1, 10 January 1993 */ - -/* - * Adapted for booting Linux by Hannu Savolainen 1993 - * based on gzip-1.0.3 - * - * Nicolas Pitre <nico@cam.org>, 1999/04/14 : - * Little mods for all variable to reside either into rodata or bss segments - * by marking constant variables with 'const' and initializing all the others - * at run-time only. This allows for the kernel uncompressor to run - * directly from Flash or ROM memory on embeded systems. - */ - -/* - Inflate deflated (PKZIP's method 8 compressed) data. The compression - method searches for as much of the current string of bytes (up to a - length of 258) in the previous 32 K bytes. If it doesn't find any - matches (of at least length 3), it codes the next byte. Otherwise, it - codes the length of the matched string and its distance backwards from - the current position. There is a single Huffman code that codes both - single bytes (called "literals") and match lengths. A second Huffman - code codes the distance information, which follows a length code. Each - length or distance code actually represents a base value and a number - of "extra" (sometimes zero) bits to get to add to the base value. At - the end of each deflated block is a special end-of-block (EOB) literal/ - length code. The decoding process is basically: get a literal/length - code; if EOB then done; if a literal, emit the decoded byte; if a - length then get the distance and emit the referred-to bytes from the - sliding window of previously emitted data. - - There are (currently) three kinds of inflate blocks: stored, fixed, and - dynamic. The compressor deals with some chunk of data at a time, and - decides which method to use on a chunk-by-chunk basis. A chunk might - typically be 32 K or 64 K. If the chunk is incompressible, then the - "stored" method is used. In this case, the bytes are simply stored as - is, eight bits per byte, with none of the above coding. The bytes are - preceded by a count, since there is no longer an EOB code. - - If the data is compressible, then either the fixed or dynamic methods - are used. In the dynamic method, the compressed data is preceded by - an encoding of the literal/length and distance Huffman codes that are - to be used to decode this block. The representation is itself Huffman - coded, and so is preceded by a description of that code. These code - descriptions take up a little space, and so for small blocks, there is - a predefined set of codes, called the fixed codes. The fixed method is - used if the block codes up smaller that way (usually for quite small - chunks), otherwise the dynamic method is used. In the latter case, the - codes are customized to the probabilities in the current block, and so - can code it much better than the pre-determined fixed codes. - - The Huffman codes themselves are decoded using a multi-level table - lookup, in order to maximize the speed of decoding plus the speed of - building the decoding tables. See the comments below that precede the - lbits and dbits tuning parameters. - */ - - -/* - Notes beyond the 1.93a appnote.txt: - - 1. Distance pointers never point before the beginning of the output - stream. - 2. Distance pointers can point back across blocks, up to 32k away. - 3. There is an implied maximum of 7 bits for the bit length table and - 15 bits for the actual data. - 4. If only one code exists, then it is encoded using one bit. (Zero - would be more efficient, but perhaps a little confusing.) If two - codes exist, they are coded using one bit each (0 and 1). - 5. There is no way of sending zero distance codes--a dummy must be - sent if there are none. (History: a pre 2.0 version of PKZIP would - store blocks with no distance codes, but this was discovered to be - too harsh a criterion.) Valid only for 1.93a. 2.04c does allow - zero distance codes, which is sent as one code of zero bits in - length. - 6. There are up to 286 literal/length codes. Code 256 represents the - end-of-block. Note however that the static length tree defines - 288 codes just to fill out the Huffman codes. Codes 286 and 287 - cannot be used though, since there is no length base or extra bits - defined for them. Similarly, there are up to 30 distance codes. - However, static trees define 32 codes (all 5 bits) to fill out the - Huffman codes, but the last two had better not show up in the data. - 7. Unzip can check dynamic Huffman blocks for complete code sets. - The exception is that a single code would not be complete (see #4). - 8. The five bits following the block type is really the number of - literal codes sent minus 257. - 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits - (1+6+6). Therefore, to output three times the length, you output - three codes (1+1+1), whereas to output four times the same length, - you only need two codes (1+3). Hmm. - 10. In the tree reconstruction algorithm, Code = Code + Increment - only if BitLength(i) is not zero. (Pretty obvious.) - 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) - 12. Note: length code 284 can represent 227-258, but length code 285 - really is 258. The last length deserves its own, short code - since it gets used a lot in very redundant files. The length - 258 is special since 258 - 3 (the min match length) is 255. - 13. The literal/length and distance code bit lengths are read as a - single stream of lengths. It is possible (and advantageous) for - a repeat code (16, 17, or 18) to go across the boundary between - the two sets of lengths. - */ - -#ifdef RCSID -static char rcsid[] = "#Id: inflate.c,v 0.14 1993/06/10 13:27:04 jloup Exp #"; -#endif - -#ifndef STATIC - -#if defined(STDC_HEADERS) || defined(HAVE_STDLIB_H) -# include <sys/types.h> -# include <stdlib.h> -#endif - -#include "gzip.h" -#define STATIC -#endif /* !STATIC */ - -#define slide window - -/* Huffman code lookup table entry--this entry is four bytes for machines - that have 16-bit pointers (e.g. PC's in the small or medium model). - Valid extra bits are 0..13. e == 15 is EOB (end of block), e == 16 - means that v is a literal, 16 < e < 32 means that v is a pointer to - the next table, which codes e - 16 bits, and lastly e == 99 indicates - an unused code. If a code with e == 99 is looked up, this implies an - error in the data. */ -struct huft { - uch e; /* number of extra bits or operation */ - uch b; /* number of bits in this code or subcode */ - union { - ush n; /* literal, length base, or distance base */ - struct huft *t; /* pointer to next level of table */ - } v; -}; - - -/* Function prototypes */ -STATIC int huft_build OF((unsigned *, unsigned, unsigned, - const ush *, const ush *, struct huft **, int *)); -STATIC int huft_free OF((struct huft *)); -STATIC int inflate_codes OF((struct huft *, struct huft *, int, int)); -STATIC int inflate_stored OF((void)); -STATIC int inflate_fixed OF((void)); -STATIC int inflate_dynamic OF((void)); -STATIC int inflate_block OF((int *)); -STATIC int inflate OF((void)); - - -/* The inflate algorithm uses a sliding 32 K byte window on the uncompressed - stream to find repeated byte strings. This is implemented here as a - circular buffer. The index is updated simply by incrementing and then - ANDing with 0x7fff (32K-1). */ -/* It is left to other modules to supply the 32 K area. It is assumed - to be usable as if it were declared "uch slide[32768];" or as just - "uch *slide;" and then malloc'ed in the latter case. The definition - must be in unzip.h, included above. */ -/* unsigned wp; current position in slide */ -#define wp outcnt -#define flush_output(w) (wp=(w),flush_window()) - -/* Tables for deflate from PKZIP's appnote.txt. */ -static const unsigned border[] = { /* Order of the bit length code lengths */ - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; -static const ush cplens[] = { /* Copy lengths for literal codes 257..285 */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - /* note: see note #13 above about the 258 in this list. */ -static const ush cplext[] = { /* Extra bits for literal codes 257..285 */ - 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99}; /* 99==invalid */ -static const ush cpdist[] = { /* Copy offsets for distance codes 0..29 */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577}; -static const ush cpdext[] = { /* Extra bits for distance codes */ - 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, - 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, - 12, 12, 13, 13}; - - - -/* Macros for inflate() bit peeking and grabbing. - The usage is: - - NEEDBITS(j) - x = b & mask_bits[j]; - DUMPBITS(j) - - where NEEDBITS makes sure that b has at least j bits in it, and - DUMPBITS removes the bits from b. The macros use the variable k - for the number of bits in b. Normally, b and k are register - variables for speed, and are initialized at the beginning of a - routine that uses these macros from a global bit buffer and count. - - If we assume that EOB will be the longest code, then we will never - ask for bits with NEEDBITS that are beyond the end of the stream. - So, NEEDBITS should not read any more bytes than are needed to - meet the request. Then no bytes need to be "returned" to the buffer - at the end of the last block. - - However, this assumption is not true for fixed blocks--the EOB code - is 7 bits, but the other literal/length codes can be 8 or 9 bits. - (The EOB code is shorter than other codes because fixed blocks are - generally short. So, while a block always has an EOB, many other - literal/length codes have a significantly lower probability of - showing up at all.) However, by making the first table have a - lookup of seven bits, the EOB code will be found in that first - lookup, and so will not require that too many bits be pulled from - the stream. - */ - -STATIC ulg bb; /* bit buffer */ -STATIC unsigned bk; /* bits in bit buffer */ - -STATIC const ush mask_bits[] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; - -#define NEXTBYTE() (uch)get_byte() -#define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}} -#define DUMPBITS(n) {b>>=(n);k-=(n);} - - -/* - Huffman code decoding is performed using a multi-level table lookup. - The fastest way to decode is to simply build a lookup table whose - size is determined by the longest code. However, the time it takes - to build this table can also be a factor if the data being decoded - is not very long. The most common codes are necessarily the - shortest codes, so those codes dominate the decoding time, and hence - the speed. The idea is you can have a shorter table that decodes the - shorter, more probable codes, and then point to subsidiary tables for - the longer codes. The time it costs to decode the longer codes is - then traded against the time it takes to make longer tables. - - This results of this trade are in the variables lbits and dbits - below. lbits is the number of bits the first level table for literal/ - length codes can decode in one step, and dbits is the same thing for - the distance codes. Subsequent tables are also less than or equal to - those sizes. These values may be adjusted either when all of the - codes are shorter than that, in which case the longest code length in - bits is used, or when the shortest code is *longer* than the requested - table size, in which case the length of the shortest code in bits is - used. - - There are two different values for the two tables, since they code a - different number of possibilities each. The literal/length table - codes 286 possible values, or in a flat code, a little over eight - bits. The distance table codes 30 possible values, or a little less - than five bits, flat. The optimum values for speed end up being - about one bit more than those, so lbits is 8+1 and dbits is 5+1. - The optimum values may differ though from machine to machine, and - possibly even between compilers. Your mileage may vary. - */ - - -STATIC const int lbits = 9; /* bits in base literal/length lookup table */ -STATIC const int dbits = 6; /* bits in base distance lookup table */ - - -/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */ -#define BMAX 16 /* maximum bit length of any code (16 for explode) */ -#define N_MAX 288 /* maximum number of codes in any set */ - - -STATIC unsigned hufts; /* track memory usage */ - - -STATIC int huft_build(b, n, s, d, e, t, m) -unsigned *b; /* code lengths in bits (all assumed <= BMAX) */ -unsigned n; /* number of codes (assumed <= N_MAX) */ -unsigned s; /* number of simple-valued codes (0..s-1) */ -const ush *d; /* list of base values for non-simple codes */ -const ush *e; /* list of extra bits for non-simple codes */ -struct huft **t; /* result: starting table */ -int *m; /* maximum lookup bits, returns actual */ -/* Given a list of code lengths and a maximum table size, make a set of - tables to decode that set of codes. Return zero on success, one if - the given code set is incomplete (the tables are still built in this - case), two if the input is invalid (all zero length codes or an - oversubscribed set of lengths), and three if not enough memory. */ -{ - unsigned a; /* counter for codes of length k */ - unsigned c[BMAX+1]; /* bit length count table */ - unsigned f; /* i repeats in table every f entries */ - int g; /* maximum code length */ - int h; /* table level */ - register unsigned i; /* counter, current code */ - register unsigned j; /* counter */ - register int k; /* number of bits in current code */ - int l; /* bits per table (returned in m) */ - register unsigned *p; /* pointer into c[], b[], or v[] */ - register struct huft *q; /* points to current table */ - struct huft r; /* table entry for structure assignment */ - struct huft *u[BMAX]; /* table stack */ - unsigned v[N_MAX]; /* values in order of bit length */ - register int w; /* bits before this table == (l * h) */ - unsigned x[BMAX+1]; /* bit offsets, then code stack */ - unsigned *xp; /* pointer into x */ - int y; /* number of dummy codes added */ - unsigned z; /* number of entries in current table */ - -DEBG("huft1 "); - - /* Generate counts for each bit length */ - memzero(c, sizeof(c)); - p = b; i = n; - do { - Tracecv(*p, (stderr, (n-i >= ' ' && n-i <= '~' ? "%c %d\n" : "0x%x %d\n"), - n-i, *p)); - c[*p]++; /* assume all entries <= BMAX */ - p++; /* Can't combine with above line (Solaris bug) */ - } while (--i); - if (c[0] == n) /* null input--all zero length codes */ - { - *t = (struct huft *)NULL; - *m = 0; - return 0; - } - -DEBG("huft2 "); - - /* Find minimum and maximum length, bound *m by those */ - l = *m; - for (j = 1; j <= BMAX; j++) - if (c[j]) - break; - k = j; /* minimum code length */ - if ((unsigned)l < j) - l = j; - for (i = BMAX; i; i--) - if (c[i]) - break; - g = i; /* maximum code length */ - if ((unsigned)l > i) - l = i; - *m = l; - -DEBG("huft3 "); - - /* Adjust last length count to fill out codes, if needed */ - for (y = 1 << j; j < i; j++, y <<= 1) - if ((y -= c[j]) < 0) - return 2; /* bad input: more codes than bits */ - if ((y -= c[i]) < 0) - return 2; - c[i] += y; - -DEBG("huft4 "); - - /* Generate starting offsets into the value table for each length */ - x[1] = j = 0; - p = c + 1; xp = x + 2; - while (--i) { /* note that i == g from above */ - *xp++ = (j += *p++); - } - -DEBG("huft5 "); - - /* Make a table of values in order of bit lengths */ - p = b; i = 0; - do { - if ((j = *p++) != 0) - v[x[j]++] = i; - } while (++i < n); - -DEBG("h6 "); - - /* Generate the Huffman codes and for each, make the table entries */ - x[0] = i = 0; /* first Huffman code is zero */ - p = v; /* grab values in bit order */ - h = -1; /* no tables yet--level -1 */ - w = -l; /* bits decoded == (l * h) */ - u[0] = (struct huft *)NULL; /* just to keep compilers happy */ - q = (struct huft *)NULL; /* ditto */ - z = 0; /* ditto */ -DEBG("h6a "); - - /* go through the bit lengths (k already is bits in shortest code) */ - for (; k <= g; k++) - { -DEBG("h6b "); - a = c[k]; - while (a--) - { -DEBG("h6b1 "); - /* here i is the Huffman code of length k bits for value *p */ - /* make tables up to required level */ - while (k > w + l) - { -DEBG1("1 "); - h++; - w += l; /* previous table always l bits */ - - /* compute minimum size table less than or equal to l bits */ - z = (z = g - w) > (unsigned)l ? l : z; /* upper limit on table size */ - if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ - { /* too few codes for k-w bit table */ -DEBG1("2 "); - f -= a + 1; /* deduct codes from patterns left */ - xp = c + k; - while (++j < z) /* try smaller tables up to z bits */ - { - if ((f <<= 1) <= *++xp) - break; /* enough codes to use up j bits */ - f -= *xp; /* else deduct codes from patterns */ - } - } -DEBG1("3 "); - z = 1 << j; /* table entries for j-bit table */ - - /* allocate and link in new table */ - if ((q = (struct huft *)malloc((z + 1)*sizeof(struct huft))) == - (struct huft *)NULL) - { - if (h) - huft_free(u[0]); - return 3; /* not enough memory */ - } -DEBG1("4 "); - hufts += z + 1; /* track memory usage */ - *t = q + 1; /* link to list for huft_free() */ - *(t = &(q->v.t)) = (struct huft *)NULL; - u[h] = ++q; /* table starts after link */ - -DEBG1("5 "); - /* connect to last table, if there is one */ - if (h) - { - x[h] = i; /* save pattern for backing up */ - r.b = (uch)l; /* bits to dump before this table */ - r.e = (uch)(16 + j); /* bits in this table */ - r.v.t = q; /* pointer to this table */ - j = i >> (w - l); /* (get around Turbo C bug) */ - u[h-1][j] = r; /* connect to last table */ - } -DEBG1("6 "); - } -DEBG("h6c "); - - /* set up table entry in r */ - r.b = (uch)(k - w); - if (p >= v + n) - r.e = 99; /* out of values--invalid code */ - else if (*p < s) - { - r.e = (uch)(*p < 256 ? 16 : 15); /* 256 is end-of-block code */ - r.v.n = (ush)(*p); /* simple code is just the value */ - p++; /* one compiler does not like *p++ */ - } - else - { - r.e = (uch)e[*p - s]; /* non-simple--look up in lists */ - r.v.n = d[*p++ - s]; - } -DEBG("h6d "); - - /* fill code-like entries with r */ - f = 1 << (k - w); - for (j = i >> w; j < z; j += f) - q[j] = r; - - /* backwards increment the k-bit code i */ - for (j = 1 << (k - 1); i & j; j >>= 1) - i ^= j; - i ^= j; - - /* backup over finished tables */ - while ((i & ((1 << w) - 1)) != x[h]) - { - h--; /* don't need to update q */ - w -= l; - } -DEBG("h6e "); - } -DEBG("h6f "); - } - -DEBG("huft7 "); - - /* Return true (1) if we were given an incomplete table */ - return y != 0 && g != 1; -} - - - -STATIC int huft_free(t) -struct huft *t; /* table to free */ -/* Free the malloc'ed tables built by huft_build(), which makes a linked - list of the tables it made, with the links in a dummy first entry of - each table. */ -{ - register struct huft *p, *q; - - - /* Go through linked list, freeing from the malloced (t[-1]) address. */ - p = t; - while (p != (struct huft *)NULL) - { - q = (--p)->v.t; - free((char*)p); - p = q; - } - return 0; -} - - -STATIC int inflate_codes(tl, td, bl, bd) -struct huft *tl, *td; /* literal/length and distance decoder tables */ -int bl, bd; /* number of bits decoded by tl[] and td[] */ -/* inflate (decompress) the codes in a deflated (compressed) block. - Return an error code or zero if it all goes ok. */ -{ - register unsigned e; /* table entry flag/number of extra bits */ - unsigned n, d; /* length and index for copy */ - unsigned w; /* current window position */ - struct huft *t; /* pointer to table entry */ - unsigned ml, md; /* masks for bl and bd bits */ - register ulg b; /* bit buffer */ - register unsigned k; /* number of bits in bit buffer */ - - - /* make local copies of globals */ - b = bb; /* initialize bit buffer */ - k = bk; - w = wp; /* initialize window position */ - - /* inflate the coded data */ - ml = mask_bits[bl]; /* precompute masks for speed */ - md = mask_bits[bd]; - for (;;) /* do until end of block */ - { - NEEDBITS((unsigned)bl) - if ((e = (t = tl + ((unsigned)b & ml))->e) > 16) - do { - if (e == 99) - return 1; - DUMPBITS(t->b) - e -= 16; - NEEDBITS(e) - } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16); - DUMPBITS(t->b) - if (e == 16) /* then it's a literal */ - { - slide[w++] = (uch)t->v.n; - Tracevv((stderr, "%c", slide[w-1])); - if (w == WSIZE) - { - flush_output(w); - w = 0; - } - } - else /* it's an EOB or a length */ - { - /* exit if end of block */ - if (e == 15) - break; - - /* get length of block to copy */ - NEEDBITS(e) - n = t->v.n + ((unsigned)b & mask_bits[e]); - DUMPBITS(e); - - /* decode distance of block to copy */ - NEEDBITS((unsigned)bd) - if ((e = (t = td + ((unsigned)b & md))->e) > 16) - do { - if (e == 99) - return 1; - DUMPBITS(t->b) - e -= 16; - NEEDBITS(e) - } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16); - DUMPBITS(t->b) - NEEDBITS(e) - d = w - t->v.n - ((unsigned)b & mask_bits[e]); - DUMPBITS(e) - Tracevv((stderr,"\\[%d,%d]", w-d, n)); - - /* do the copy */ - do { - n -= (e = (e = WSIZE - ((d &= WSIZE-1) > w ? d : w)) > n ? n : e); -#if !defined(NOMEMCPY) && !defined(DEBUG) - if (w - d >= e) /* (this test assumes unsigned comparison) */ - { - memcpy(slide + w, slide + d, e); - w += e; - d += e; - } - else /* do it slow to avoid memcpy() overlap */ -#endif /* !NOMEMCPY */ - do { - slide[w++] = slide[d++]; - Tracevv((stderr, "%c", slide[w-1])); - } while (--e); - if (w == WSIZE) - { - flush_output(w); - w = 0; - } - } while (n); - } - } - - - /* restore the globals from the locals */ - wp = w; /* restore global window pointer */ - bb = b; /* restore global bit buffer */ - bk = k; - - /* done */ - return 0; -} - - - -STATIC int inflate_stored() -/* "decompress" an inflated type 0 (stored) block. */ -{ - unsigned n; /* number of bytes in block */ - unsigned w; /* current window position */ - register ulg b; /* bit buffer */ - register unsigned k; /* number of bits in bit buffer */ - -DEBG("<stor"); - - /* make local copies of globals */ - b = bb; /* initialize bit buffer */ - k = bk; - w = wp; /* initialize window position */ - - - /* go to byte boundary */ - n = k & 7; - DUMPBITS(n); - - - /* get the length and its complement */ - NEEDBITS(16) - n = ((unsigned)b & 0xffff); - DUMPBITS(16) - NEEDBITS(16) - if (n != (unsigned)((~b) & 0xffff)) - return 1; /* error in compressed data */ - DUMPBITS(16) - - - /* read and output the compressed data */ - while (n--) - { - NEEDBITS(8) - slide[w++] = (uch)b; - if (w == WSIZE) - { - flush_output(w); - w = 0; - } - DUMPBITS(8) - } - - - /* restore the globals from the locals */ - wp = w; /* restore global window pointer */ - bb = b; /* restore global bit buffer */ - bk = k; - - DEBG(">"); - return 0; -} - - - -STATIC int inflate_fixed() -/* decompress an inflated type 1 (fixed Huffman codes) block. We should - either replace this with a custom decoder, or at least precompute the - Huffman tables. */ -{ - int i; /* temporary variable */ - struct huft *tl; /* literal/length code table */ - struct huft *td; /* distance code table */ - int bl; /* lookup bits for tl */ - int bd; /* lookup bits for td */ - unsigned l[288]; /* length list for huft_build */ - -DEBG("<fix"); - - /* set up literal table */ - for (i = 0; i < 144; i++) - l[i] = 8; - for (; i < 256; i++) - l[i] = 9; - for (; i < 280; i++) - l[i] = 7; - for (; i < 288; i++) /* make a complete, but wrong code set */ - l[i] = 8; - bl = 7; - if ((i = huft_build(l, 288, 257, cplens, cplext, &tl, &bl)) != 0) - return i; - - - /* set up distance table */ - for (i = 0; i < 30; i++) /* make an incomplete code set */ - l[i] = 5; - bd = 5; - if ((i = huft_build(l, 30, 0, cpdist, cpdext, &td, &bd)) > 1) - { - huft_free(tl); - - DEBG(">"); - return i; - } - - - /* decompress until an end-of-block code */ - if (inflate_codes(tl, td, bl, bd)) - return 1; - - - /* free the decoding tables, return */ - huft_free(tl); - huft_free(td); - return 0; -} - - - -STATIC int inflate_dynamic() -/* decompress an inflated type 2 (dynamic Huffman codes) block. */ -{ - int i; /* temporary variables */ - unsigned j; - unsigned l; /* last length */ - unsigned m; /* mask for bit lengths table */ - unsigned n; /* number of lengths to get */ - struct huft *tl; /* literal/length code table */ - struct huft *td; /* distance code table */ - int bl; /* lookup bits for tl */ - int bd; /* lookup bits for td */ - unsigned nb; /* number of bit length codes */ - unsigned nl; /* number of literal/length codes */ - unsigned nd; /* number of distance codes */ -#ifdef PKZIP_BUG_WORKAROUND - unsigned ll[288+32]; /* literal/length and distance code lengths */ -#else - unsigned ll[286+30]; /* literal/length and distance code lengths */ -#endif - register ulg b; /* bit buffer */ - register unsigned k; /* number of bits in bit buffer */ - -DEBG("<dyn"); - - /* make local bit buffer */ - b = bb; - k = bk; - - - /* read in table lengths */ - NEEDBITS(5) - nl = 257 + ((unsigned)b & 0x1f); /* number of literal/length codes */ - DUMPBITS(5) - NEEDBITS(5) - nd = 1 + ((unsigned)b & 0x1f); /* number of distance codes */ - DUMPBITS(5) - NEEDBITS(4) - nb = 4 + ((unsigned)b & 0xf); /* number of bit length codes */ - DUMPBITS(4) -#ifdef PKZIP_BUG_WORKAROUND - if (nl > 288 || nd > 32) -#else - if (nl > 286 || nd > 30) -#endif - return 1; /* bad lengths */ - -DEBG("dyn1 "); - - /* read in bit-length-code lengths */ - for (j = 0; j < nb; j++) - { - NEEDBITS(3) - ll[border[j]] = (unsigned)b & 7; - DUMPBITS(3) - } - for (; j < 19; j++) - ll[border[j]] = 0; - -DEBG("dyn2 "); - - /* build decoding table for trees--single level, 7 bit lookup */ - bl = 7; - if ((i = huft_build(ll, 19, 19, NULL, NULL, &tl, &bl)) != 0) - { - if (i == 1) - huft_free(tl); - return i; /* incomplete code set */ - } - -DEBG("dyn3 "); - - /* read in literal and distance code lengths */ - n = nl + nd; - m = mask_bits[bl]; - i = l = 0; - while ((unsigned)i < n) - { - NEEDBITS((unsigned)bl) - j = (td = tl + ((unsigned)b & m))->b; - DUMPBITS(j) - j = td->v.n; - if (j < 16) /* length of code in bits (0..15) */ - ll[i++] = l = j; /* save last length in l */ - else if (j == 16) /* repeat last length 3 to 6 times */ - { - NEEDBITS(2) - j = 3 + ((unsigned)b & 3); - DUMPBITS(2) - if ((unsigned)i + j > n) - return 1; - while (j--) - ll[i++] = l; - } - else if (j == 17) /* 3 to 10 zero length codes */ - { - NEEDBITS(3) - j = 3 + ((unsigned)b & 7); - DUMPBITS(3) - if ((unsigned)i + j > n) - return 1; - while (j--) - ll[i++] = 0; - l = 0; - } - else /* j == 18: 11 to 138 zero length codes */ - { - NEEDBITS(7) - j = 11 + ((unsigned)b & 0x7f); - DUMPBITS(7) - if ((unsigned)i + j > n) - return 1; - while (j--) - ll[i++] = 0; - l = 0; - } - } - -DEBG("dyn4 "); - - /* free decoding table for trees */ - huft_free(tl); - -DEBG("dyn5 "); - - /* restore the global bit buffer */ - bb = b; - bk = k; - -DEBG("dyn5a "); - - /* build the decoding tables for literal/length and distance codes */ - bl = lbits; - if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0) - { -DEBG("dyn5b "); - if (i == 1) { - error(" incomplete literal tree\n"); - huft_free(tl); - } - return i; /* incomplete code set */ - } -DEBG("dyn5c "); - bd = dbits; - if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0) - { -DEBG("dyn5d "); - if (i == 1) { - error(" incomplete distance tree\n"); -#ifdef PKZIP_BUG_WORKAROUND - i = 0; - } -#else - huft_free(td); - } - huft_free(tl); - return i; /* incomplete code set */ -#endif - } - -DEBG("dyn6 "); - - /* decompress until an end-of-block code */ - if (inflate_codes(tl, td, bl, bd)) - return 1; - -DEBG("dyn7 "); - - /* free the decoding tables, return */ - huft_free(tl); - huft_free(td); - - DEBG(">"); - return 0; -} - - - -STATIC int inflate_block(e) -int *e; /* last block flag */ -/* decompress an inflated block */ -{ - unsigned t; /* block type */ - register ulg b; /* bit buffer */ - register unsigned k; /* number of bits in bit buffer */ - - DEBG("<blk"); - - /* make local bit buffer */ - b = bb; - k = bk; - - - /* read in last block bit */ - NEEDBITS(1) - *e = (int)b & 1; - DUMPBITS(1) - - - /* read in block type */ - NEEDBITS(2) - t = (unsigned)b & 3; - DUMPBITS(2) - - - /* restore the global bit buffer */ - bb = b; - bk = k; - - /* inflate that block type */ - if (t == 2) - return inflate_dynamic(); - if (t == 0) - return inflate_stored(); - if (t == 1) - return inflate_fixed(); - - DEBG(">"); - - /* bad block type */ - return 2; -} - - - -STATIC int inflate() -/* decompress an inflated entry */ -{ - int e; /* last block flag */ - int r; /* result code */ - unsigned h; /* maximum struct huft's malloc'ed */ - malloc_mark_t mark; - - /* initialize window, bit buffer */ - wp = 0; - bk = 0; - bb = 0; - - - /* decompress until the last block */ - h = 0; - do { - hufts = 0; - malloc_mark(&mark); - if ((r = inflate_block(&e)) != 0) { - malloc_release(&mark); - return r; - } - malloc_release(&mark); - if (hufts > h) - h = hufts; - } while (!e); - - /* Undo too much lookahead. The next read will be byte aligned so we - * can discard unused bits in the last meaningful byte. - */ - while (bk >= 8) { - bk -= 8; - inptr--; - } - - /* flush out slide */ - flush_output(wp); - - - /* return success */ - DBG(("<%u> ", h)); - return 0; -} - -/********************************************************************** - * - * The following are support routines for inflate.c - * - **********************************************************************/ - -static ulg crc_32_tab[256]; -static ulg crc; /* initialized in makecrc() so it'll reside in bss */ -#define CRC_VALUE (crc ^ 0xffffffffL) - -/* - * Code to compute the CRC-32 table. Borrowed from - * gzip-1.0.3/makecrc.c. - */ - -static void -makecrc(void) -{ -/* Not copyrighted 1990 Mark Adler */ - - unsigned long c; /* crc shift register */ - unsigned long e; /* polynomial exclusive-or pattern */ - int i; /* counter for all possible eight bit values */ - int k; /* byte being shifted into crc apparatus */ - - /* terms of polynomial defining this crc (except x^32): */ - static const int p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - - /* Make exclusive-or pattern from polynomial */ - e = 0; - for (i = 0; i < sizeof(p)/sizeof(int); i++) - e |= 1L << (31 - p[i]); - - crc_32_tab[0] = 0; - - for (i = 1; i < 256; i++) - { - c = 0; - for (k = i | 256; k != 1; k >>= 1) - { - c = c & 1 ? (c >> 1) ^ e : c >> 1; - if (k & 1) - c ^= e; - } - crc_32_tab[i] = c; - } - - /* this is initialized here so this code could reside in ROM */ - crc = (ulg)0xffffffffL; /* shift register contents */ -} - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -/* - * Do the uncompression! - */ -int gunzip(void) -{ - uch flags; - unsigned char magic[2]; /* magic header */ - char method; - ulg orig_crc = 0; /* original crc */ - ulg orig_len = 0; /* original uncompressed length */ - int res; - - magic[0] = (unsigned char)get_byte(); - magic[1] = (unsigned char)get_byte(); - method = (unsigned char)get_byte(); - - if (magic[0] != 037 || - ((magic[1] != 0213) && (magic[1] != 0236))) { - error("bad gzip magic numbers"); - return -1; - } - - /* We only support method #8, DEFLATED */ - if (method != 8) { - error("internal error, invalid method"); - return -1; - } - - flags = (uch)get_byte(); - if ((flags & ENCRYPTED) != 0) { - error("Input is encrypted\n"); - return -1; - } - if ((flags & CONTINUATION) != 0) { - error("Multi part input\n"); - return -1; - } - if ((flags & RESERVED) != 0) { - error("Input has invalid flags\n"); - return -1; - } - (ulg)get_byte(); /* Get timestamp */ - ((ulg)get_byte()) << 8; - ((ulg)get_byte()) << 16; - ((ulg)get_byte()) << 24; - - (void)get_byte(); /* Ignore extra flags for the moment */ - (void)get_byte(); /* Ignore OS type for the moment */ - - if ((flags & EXTRA_FIELD) != 0) { - unsigned len = (unsigned)get_byte(); - len |= ((unsigned)get_byte())<<8; - while (len--) (void)get_byte(); - } - - /* Get original file name if it was truncated */ - if ((flags & ORIG_NAME) != 0) { - /* Discard the old name */ - while (get_byte() != 0) /* null */ ; - } - - /* Discard file comment if any */ - if ((flags & COMMENT) != 0) { - while (get_byte() != 0) /* null */ ; - } - - /* Decompress */ - if ((res = inflate())) { - switch (res) { - case 0: - break; - case 1: - error("invalid compressed format (err=1)"); - break; - case 2: - error("invalid compressed format (err=2)"); - break; - case 3: - error("out of memory"); - break; - default: - error("invalid compressed format (other)"); - } - return -1; - } - - /* Get the crc and original length */ - /* crc32 (see algorithm.doc) - * uncompressed input size modulo 2^32 - */ - orig_crc = (ulg) get_byte(); - orig_crc |= (ulg) get_byte() << 8; - orig_crc |= (ulg) get_byte() << 16; - orig_crc |= (ulg) get_byte() << 24; - - orig_len = (ulg) get_byte(); - orig_len |= (ulg) get_byte() << 8; - orig_len |= (ulg) get_byte() << 16; - orig_len |= (ulg) get_byte() << 24; - - /* Validate decompression */ - if (orig_crc != CRC_VALUE) { - error("crc error"); - return -1; - } - if (orig_len != bytes_out) { - error("length error"); - return -1; - } - return 0; -} - - diff --git a/util/mkelfImage/kunzip_src/lib/kunzip.c b/util/mkelfImage/kunzip_src/lib/kunzip.c deleted file mode 100644 index b8ae1c1ecc..0000000000 --- a/util/mkelfImage/kunzip_src/lib/kunzip.c +++ /dev/null @@ -1,170 +0,0 @@ -#include <string.h> -#include <stdlib.h> - -/* - * gzip support routine declartions.. - * ========================================================= - */ - -#ifdef DEBUG -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -# define DBG(x) printf x -#else -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -# define DBG(x) -#endif - -void error(char *str) -{ - DBG(("%s\n", str)); -} - -static unsigned char *inbuf; /* input buffer */ -static unsigned int insize; /* valid bytes in inbuf */ -static unsigned int inptr; /* index of next byte to be processed in inbuf */ - -#if !defined(DEBUG) -#define get_byte() (inptr < insize ? inbuf[inptr++] : 0) -#else -static unsigned char get_byte(void) -{ - static int count; - unsigned char byte = (inptr < insize ? inbuf[inptr++] : 0); -#if 0 - printf("%02x ", byte); - if ((++count & 0x0f) == 0) { - printf("\n"); - } -#endif - return byte; -} - -#endif - -static void flush_window(void); - -static long bytes_out; /* total bytes compressed */ -static unsigned outcnt; /* bytes in output buffer */ - -#define WSIZE 0x8000 /* Window size must be at least 32k, and a power of two */ -static unsigned char window[WSIZE]; /* Sliding window buffer */ - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - - -#define memzero(s, n) memset ((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - - - -#include "inflate.c" - - -/* Variables that gunzip doesn't need to see... */ -static unsigned char *output_ptr; -static unsigned long end_offset; -static struct unzip_region { - unsigned long start; - unsigned long end_offset; -} unzip_region; - -/* Data provided by the header */ -extern unsigned char zipped_data[]; -extern unsigned char zipped_data_end[]; -extern unsigned char entry; -/* Assembly language routines */ -extern void jmp_to_program_entry(void *); - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - unsigned long limit; - uch *in, *out, ch; - - limit = outcnt; - - - n = 0; - in = window; - while (n < outcnt) { - limit = end_offset - bytes_out +n; - if (limit > outcnt) { - limit = outcnt; - } - out = output_ptr; - DBG(("flush 0x%08lx start 0x%08lx limit 0x%08lx\n", - (unsigned long) out, (unsigned long)n, limit)); - for (; n < limit; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int) c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (out - output_ptr); - output_ptr = out; - if (bytes_out == end_offset) { - if (output_ptr == (unsigned char *)(&unzip_region+1)) { - output_ptr = (unsigned char *)(unzip_region.start); - end_offset = unzip_region.end_offset; - } else { - output_ptr = (unsigned char *)&unzip_region; - end_offset += sizeof(unzip_region); - } - } - } - outcnt = 0; -} - - -void gunzip_setup(void) -{ - DBG(("gunzip_setup\n")); - outcnt = 0; - bytes_out = 0; - - end_offset = sizeof(unzip_region); - output_ptr = (unsigned char *)&unzip_region; - - inbuf = &zipped_data[0]; - insize = zipped_data_end - zipped_data; - inptr = 0; - - makecrc(); - DBG(("gunzip_setup_done\n")); -} - - -int kunzip(int argc, char **argv) -{ - DBG(("kunzip\n")); - gunzip_setup(); - DBG(("pre_gunzip\n")); - if (gunzip() != 0) { - error("gunzip failed"); - while(1) {} - return -1; - } - DBG(("pre_jmp_to_program_entry: %p\n", &entry )); - jmp_to_program_entry(&entry); - return 0; -} diff --git a/util/mkelfImage/kunzip_src/lib/malloc.c b/util/mkelfImage/kunzip_src/lib/malloc.c deleted file mode 100644 index 8e43e0c226..0000000000 --- a/util/mkelfImage/kunzip_src/lib/malloc.c +++ /dev/null @@ -1,42 +0,0 @@ -#include <stdlib.h> - -extern unsigned char _heap, _eheap; -static size_t free_mem_ptr = (size_t)&_heap; /* Start of heap */ -static size_t free_mem_end_ptr = (size_t)&_eheap; /* End of heap */ - - -void malloc_mark(malloc_mark_t *place) -{ - *place = free_mem_ptr; -} - -void malloc_release(malloc_mark_t *ptr) -{ - free_mem_ptr = *ptr; -} - -void *malloc(size_t size) -{ - void *p; - - if (size < 0) - error("Error! malloc: Size < 0"); - if (free_mem_ptr <= 0) - error("Error! malloc: Free_mem_ptr <= 0"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *) free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_end_ptr) - error("Error! malloc: Free_mem_ptr >= free_mem_end_ptr"); - - - return p; -} - -void free(void *where) -{ - /* Don't care */ -} diff --git a/util/mkelfImage/kunzip_src/lib/memcmp.c b/util/mkelfImage/kunzip_src/lib/memcmp.c deleted file mode 100644 index 46f13a41bd..0000000000 --- a/util/mkelfImage/kunzip_src/lib/memcmp.c +++ /dev/null @@ -1,17 +0,0 @@ -#include <string.h> - -int memcmp(const void *src1, const void *src2, size_t bytes) -{ - const unsigned char *s1, *s2; - int result; - s1 = src1; - s2 = src2; - result = 0; - while((bytes > 0) && (result == 0)) { - result = *s1 - *s2; - bytes--; - s1++; - s2++; - } - return result; -} diff --git a/util/mkelfImage/kunzip_src/lib/memcpy.c b/util/mkelfImage/kunzip_src/lib/memcpy.c deleted file mode 100644 index ad8e8bd3f0..0000000000 --- a/util/mkelfImage/kunzip_src/lib/memcpy.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <string.h> -void *memcpy(void *__dest, __const void *__src, size_t __n) -{ - int i; - char *d = (char *) __dest, *s = (char *) __src; - - for (i = 0; i < __n; i++) - d[i] = s[i]; - - return __dest; -} diff --git a/util/mkelfImage/kunzip_src/lib/memset.c b/util/mkelfImage/kunzip_src/lib/memset.c deleted file mode 100644 index c1bb4f841f..0000000000 --- a/util/mkelfImage/kunzip_src/lib/memset.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <string.h> - -void *memset(void *s, int c, size_t n) -{ - int i; - char *ss = (char *) s; - - for (i = 0; i < n; i++) - ss[i] = c; - - return s; -} diff --git a/util/mkelfImage/linux-i386/Makefile b/util/mkelfImage/linux-i386/Makefile deleted file mode 100644 index 51531d6f4b..0000000000 --- a/util/mkelfImage/linux-i386/Makefile +++ /dev/null @@ -1,35 +0,0 @@ -LI386_DIR:=linux-i386 -LI386_OBJ:=$(OBJDIR)/$(LI386_DIR) -LI386_DEP=Makefile Makefile.conf $(LI386_DIR)/Makefile - -$(LI386_OBJ)/mkelf-linux-i386.o: $(LI386_DIR)/mkelf-linux-i386.c $(LI386_DIR)/convert.bin.c $(LI386_DEP) - $(MKDIR) -p $(@D) - $(HOST_CC) $(HOST_CFLAGS) -c -g $< -o $@ - - -ifdef I386_CC - -$(LI386_DIR)/convert.bin.c: $(LI386_OBJ)/convert.bin $(OBJDIR)/bin/bin-to-hex $(LI386_DEP) - $(MKDIR) -p $(@D) - $(OBJDIR)/bin/bin-to-hex < $(LI386_OBJ)/convert.bin > $@ - -$(LI386_OBJ)/convert.bin: $(LI386_OBJ)/convert $(LI386_DEP) - $(MKDIR) -p $(@D) - $(I386_OBJCOPY) -O binary $< $@ - -CONVERT_LI386_OBJS=$(LI386_OBJ)/head.o $(LI386_OBJ)/convert_params.o - -$(LI386_OBJ)/convert: $(LI386_DIR)/convert.lds $(CONVERT_LI386_OBJS) $(LI386_DEP) - $(MKDIR) -p $(@D) - $(I386_LD) $(I386_LDFLAGS) -T $(LI386_DIR)/convert.lds -o $@ $(CONVERT_LI386_OBJS) - -$(LI386_OBJ)/head.o: $(LI386_DIR)/head.S $(LI386_DIR)/convert.h - $(MKDIR) -p $(@D) - $(I386_CPP) $(I386_CPPFLAGS) -DASSEMBLY $< | $(I386_AS) $(I386_ASFLAGS) -o $@ - -$(LI386_OBJ)/convert_params.o: $(LI386_DIR)/convert_params.c $(LI386_DIR)/convert.h $(LI386_DEP) - $(MKDIR) -p $(@D) - $(I386_CC) $(I386_CFLAGS) -c -o $@ $< - -endif - diff --git a/util/mkelfImage/linux-i386/convert.bin.c b/util/mkelfImage/linux-i386/convert.bin.c deleted file mode 100644 index 7cf0eb5e72..0000000000 --- a/util/mkelfImage/linux-i386/convert.bin.c +++ /dev/null @@ -1,284 +0,0 @@ -0xfc, 0xfa, 0xa3, 0xee, 0x01, 0x01, 0x00, 0x89, 0x1d, 0xf2, 0x01, 0x01, 0x00, 0x83, 0xfc, 0x00, -0x74, 0x09, 0x8b, 0x44, 0x24, 0x04, 0xa3, 0xf6, 0x01, 0x01, 0x00, 0x8b, 0x25, 0x8c, 0x10, 0x01, -0x00, 0x6a, 0x00, 0x9d, 0x31, 0xc0, 0xbf, 0xbc, 0x11, 0x01, 0x00, 0xb9, 0x44, 0x54, 0x01, 0x00, -0x29, 0xf9, 0xfc, 0xf3, 0xaa, 0xbe, 0x0c, 0x02, 0x01, 0x00, 0xbf, 0x00, 0x10, 0x02, 0x00, 0xb9, -0x70, 0x00, 0x00, 0x00, 0xf3, 0xa4, 0x0f, 0x01, 0x15, 0x06, 0x02, 0x01, 0x00, 0x0f, 0x01, 0x1d, -0x00, 0x02, 0x01, 0x00, 0xb8, 0x18, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x8e, 0xc0, 0x8e, 0xe0, 0x8e, -0xe8, 0x8e, 0xd0, 0x68, 0xa0, 0x10, 0x01, 0x00, 0xff, 0x35, 0xf6, 0x01, 0x01, 0x00, 0xff, 0x35, -0xf2, 0x01, 0x01, 0x00, 0xff, 0x35, 0xee, 0x01, 0x01, 0x00, 0xe8, 0x50, 0x08, 0x00, 0x00, 0x89, -0xc6, 0x83, 0xc4, 0x10, 0x6a, 0x00, 0x9d, 0x31, 0xdb, 0x31, 0xc0, 0x31, 0xc9, 0x31, 0xd2, 0x31, -0xff, 0x31, 0xe4, 0x31, 0xed, 0xea, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x55, 0x89, 0xe5, 0x53, -0x56, 0x57, 0x8b, 0x7d, 0x08, 0x81, 0xef, 0x00, 0x00, 0x01, 0x00, 0x8b, 0x75, 0x0c, 0x56, 0xe8, -0xfc, 0x00, 0x00, 0x00, 0x66, 0x31, 0xdb, 0x66, 0xb8, 0x20, 0xe8, 0x00, 0x00, 0x66, 0xba, 0x50, -0x41, 0x4d, 0x53, 0x66, 0xb9, 0x14, 0x00, 0x00, 0x00, 0xcd, 0x15, 0x72, 0x18, 0x66, 0x3d, 0x50, -0x41, 0x4d, 0x53, 0x75, 0x10, 0x66, 0x4e, 0x66, 0x85, 0xf6, 0x74, 0x09, 0x83, 0xc7, 0x14, 0x66, -0x83, 0xfb, 0x00, 0x75, 0xd2, 0x66, 0xe8, 0x82, 0x00, 0x00, 0x00, 0x58, 0x29, 0xf0, 0x5f, 0x5e, -0x5b, 0x89, 0xec, 0x5d, 0xc3, 0x53, 0x56, 0x57, 0xe8, 0xb3, 0x00, 0x00, 0x00, 0xf9, 0x31, 0xc9, -0x31, 0xd2, 0xb8, 0x01, 0xe8, 0xcd, 0x15, 0x72, 0x28, 0x83, 0xf9, 0x00, 0x75, 0x09, 0x83, 0xfa, -0x00, 0x75, 0x04, 0x89, 0xc1, 0x89, 0xda, 0x66, 0x81, 0xe2, 0xff, 0xff, 0x00, 0x00, 0x66, 0xc1, -0xe2, 0x06, 0x66, 0x89, 0xd0, 0x66, 0x81, 0xe1, 0xff, 0xff, 0x00, 0x00, 0x66, 0x01, 0xc8, 0xeb, -0x03, 0x66, 0x31, 0xc0, 0x66, 0xe8, 0x33, 0x00, 0x00, 0x00, 0x5f, 0x5e, 0x5b, 0xc3, 0x53, 0x56, -0x57, 0xe8, 0x6a, 0x00, 0x00, 0x00, 0xb4, 0x88, 0xcd, 0x15, 0x66, 0x25, 0xff, 0xff, 0x00, 0x00, -0x66, 0xe8, 0x17, 0x00, 0x00, 0x00, 0x5f, 0x5e, 0x5b, 0xc3, 0xe8, 0x51, 0x00, 0x00, 0x00, 0xcd, -0x12, 0x89, 0xc1, 0x66, 0xe8, 0x04, 0x00, 0x00, 0x00, 0x66, 0x89, 0xc8, 0xc3, 0xfa, 0x2e, 0x67, -0x0f, 0x01, 0x15, 0x06, 0x02, 0x00, 0x00, 0x0f, 0x20, 0xc0, 0x66, 0x83, 0xc8, 0x01, 0x0f, 0x22, -0xc0, 0x66, 0xea, 0x89, 0x01, 0x01, 0x00, 0x10, 0x00, 0xb8, 0x18, 0x00, 0x00, 0x00, 0x8e, 0xd8, -0x8e, 0xc0, 0x8e, 0xd0, 0x81, 0xc4, 0x00, 0x00, 0x01, 0x00, 0x31, 0xc0, 0x8e, 0xe0, 0x8e, 0xe8, -0x58, 0x05, 0x00, 0x00, 0x01, 0x00, 0x50, 0x2e, 0x0f, 0x01, 0x1d, 0x00, 0x02, 0x01, 0x00, 0xc3, -0x58, 0x2d, 0x00, 0x00, 0x01, 0x00, 0x50, 0x81, 0xec, 0x00, 0x00, 0x01, 0x00, 0xea, 0xc4, 0x01, -0x00, 0x00, 0x08, 0x00, 0x0f, 0x20, 0xc0, 0x66, 0x83, 0xe0, 0xfe, 0x0f, 0x22, 0xc0, 0x66, 0xea, -0xd6, 0x01, 0x00, 0x00, 0x00, 0x10, 0x8c, 0xc8, 0x8e, 0xd8, 0x8e, 0xc0, 0x8e, 0xd0, 0x8e, 0xe0, -0x8e, 0xe8, 0x2e, 0x67, 0x0f, 0x01, 0x1d, 0xfa, 0x01, 0x00, 0x00, 0xfb, 0x66, 0xc3, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6f, 0x00, 0x00, 0x10, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x01, 0x9b, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, -0x00, 0x9a, 0xcf, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0xff, 0xff, 0x00, 0x00, -0x01, 0x93, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, -0x00, 0x9a, 0xcf, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x55, 0x89, 0xe5, 0x89, -0xc1, 0xba, 0xfd, 0x03, 0x00, 0x00, 0xec, 0xa8, 0x20, 0x74, 0xf6, 0xb2, 0xf8, 0x88, 0xc8, 0xee, -0xba, 0xfd, 0x03, 0x00, 0x00, 0xec, 0xa8, 0x40, 0x74, 0xf6, 0xc9, 0xc3, 0x55, 0x83, 0xf8, 0x0a, -0x89, 0xe5, 0x53, 0x89, 0xc3, 0x75, 0x0a, 0xb8, 0x0d, 0x00, 0x00, 0x00, 0xe8, 0xcb, 0xff, 0xff, -0xff, 0x89, 0xd8, 0x5b, 0xc9, 0xeb, 0xc5, 0x55, 0x89, 0xe5, 0x57, 0x56, 0x53, 0x83, 0xec, 0x44, -0x8d, 0x45, 0x0c, 0x8b, 0x75, 0x08, 0x89, 0x45, 0xc0, 0x80, 0x3e, 0x00, 0x0f, 0x84, 0x5b, 0x01, -0x00, 0x00, 0x8a, 0x06, 0x3c, 0x25, 0x74, 0x0d, 0x0f, 0xbe, 0xc0, 0xe8, 0xbc, 0xff, 0xff, 0xff, -0xe9, 0x42, 0x01, 0x00, 0x00, 0x46, 0x8a, 0x06, 0x3c, 0x73, 0x75, 0x1d, 0x8b, 0x45, 0xc0, 0x8b, -0x18, 0x83, 0x45, 0xc0, 0x04, 0x80, 0x3b, 0x00, 0x0f, 0x84, 0x29, 0x01, 0x00, 0x00, 0x0f, 0xbe, -0x03, 0xe8, 0x96, 0xff, 0xff, 0xff, 0x43, 0xeb, 0xec, 0x3c, 0x4c, 0x8d, 0x7d, 0xc4, 0xc7, 0x45, -0xbc, 0x1c, 0x00, 0x00, 0x00, 0x75, 0x09, 0xc7, 0x45, 0xbc, 0x3c, 0x00, 0x00, 0x00, 0xeb, 0x1c, -0x3c, 0x6c, 0x74, 0x18, 0x3c, 0x68, 0x75, 0x15, 0xc7, 0x45, 0xbc, 0x0c, 0x00, 0x00, 0x00, 0x46, -0x80, 0x3e, 0x68, 0x75, 0x08, 0xc7, 0x45, 0xbc, 0x04, 0x00, 0x00, 0x00, 0x46, 0x8a, 0x16, 0x88, -0xd0, 0x83, 0xc8, 0x20, 0x3c, 0x78, 0x75, 0x61, 0x83, 0x7d, 0xbc, 0x1c, 0x7e, 0x0e, 0x8b, 0x45, -0xc0, 0x8b, 0x08, 0x83, 0x45, 0xc0, 0x08, 0x8b, 0x58, 0x04, 0xeb, 0x0b, 0x8b, 0x45, 0xc0, 0x8b, -0x08, 0x83, 0x45, 0xc0, 0x04, 0x31, 0xdb, 0x89, 0x5d, 0xb4, 0x89, 0xd3, 0x83, 0xe3, 0x20, 0x89, -0x4d, 0xb0, 0x89, 0x5d, 0xb8, 0x83, 0x7d, 0xbc, 0x00, 0x0f, 0x88, 0x96, 0x00, 0x00, 0x00, 0x8a, -0x4d, 0xbc, 0x8b, 0x55, 0xb4, 0x8b, 0x45, 0xb0, 0x0f, 0xad, 0xd0, 0xd3, 0xea, 0x80, 0xe1, 0x20, -0x74, 0x02, 0x89, 0xd0, 0x83, 0xe0, 0x0f, 0x8a, 0x5d, 0xb8, 0x0a, 0x98, 0x48, 0x0f, 0x01, 0x00, -0x88, 0x1f, 0x47, 0x83, 0x6d, 0xbc, 0x04, 0xeb, 0xd0, 0x80, 0xfa, 0x64, 0x75, 0x4e, 0x83, 0x7d, -0xbc, 0x1c, 0x7e, 0x09, 0x8b, 0x45, 0xc0, 0x83, 0x45, 0xc0, 0x08, 0xeb, 0x07, 0x8b, 0x45, 0xc0, -0x83, 0x45, 0xc0, 0x04, 0x8b, 0x10, 0x85, 0xd2, 0x79, 0x06, 0xc6, 0x07, 0x2d, 0xf7, 0xda, 0x47, -0x89, 0xfb, 0x89, 0xd0, 0x99, 0xb9, 0x0a, 0x00, 0x00, 0x00, 0xf7, 0xf9, 0x83, 0xc2, 0x30, 0x88, -0x17, 0x47, 0x85, 0xc0, 0x89, 0xc2, 0x75, 0xea, 0x8d, 0x4f, 0xff, 0x39, 0xd9, 0x76, 0x26, 0x0f, -0xbe, 0x11, 0x8a, 0x03, 0x88, 0x01, 0x88, 0x13, 0x49, 0x43, 0xeb, 0xef, 0x80, 0xfa, 0x63, 0x8d, -0x4f, 0x01, 0x75, 0x0d, 0x8b, 0x45, 0xc0, 0x8b, 0x00, 0x83, 0x45, 0xc0, 0x04, 0x88, 0x07, 0xeb, -0x02, 0x88, 0x17, 0x89, 0xcf, 0x8d, 0x5d, 0xc4, 0x39, 0xfb, 0x73, 0x0b, 0x0f, 0xbe, 0x03, 0xe8, -0x78, 0xfe, 0xff, 0xff, 0x43, 0xeb, 0xf1, 0x46, 0xe9, 0x9c, 0xfe, 0xff, 0xff, 0x83, 0xc4, 0x44, -0x5b, 0x5e, 0x5f, 0xc9, 0xc3, 0x55, 0x89, 0xe5, 0x8b, 0x55, 0x08, 0x8b, 0x4d, 0x0c, 0x31, 0xc0, -0xeb, 0x07, 0x80, 0x3a, 0x00, 0x74, 0x06, 0x40, 0x42, 0x39, 0xc8, 0x72, 0xf5, 0xc9, 0xc3, 0x55, -0x89, 0xe5, 0x8b, 0x45, 0x08, 0x53, 0x8b, 0x4d, 0x10, 0x8b, 0x5d, 0x0c, 0x31, 0xd2, 0x39, 0xca, -0x73, 0x06, 0x88, 0x1c, 0x10, 0x42, 0xeb, 0xf6, 0x5b, 0xc9, 0xc3, 0x55, 0x89, 0xe5, 0x56, 0x53, -0x8b, 0x4d, 0x08, 0x8b, 0x75, 0x0c, 0x8b, 0x5d, 0x10, 0x31, 0xd2, 0x39, 0xda, 0x73, 0x09, 0x8a, -0x04, 0x16, 0x88, 0x04, 0x11, 0x42, 0xeb, 0xf3, 0x5b, 0x89, 0xc8, 0x5e, 0xc9, 0xc3, 0x55, 0x89, -0xe5, 0x57, 0x56, 0x53, 0x8b, 0x7d, 0x08, 0x8b, 0x75, 0x0c, 0x8b, 0x5d, 0x10, 0x31, 0xd2, 0x39, -0xda, 0x73, 0x15, 0x8a, 0x0f, 0x8a, 0x06, 0x38, 0xc1, 0x74, 0x0a, 0x0f, 0xb6, 0xd0, 0x0f, 0xb6, -0xc1, 0x29, 0xc2, 0xeb, 0x05, 0x42, 0xeb, 0xe7, 0x31, 0xd2, 0x5b, 0x5e, 0x89, 0xd0, 0x5f, 0xc9, -0xc3, 0x55, 0x89, 0xe5, 0x56, 0x53, 0x89, 0xd3, 0x51, 0x31, 0xc9, 0x31, 0xd2, 0x89, 0xc6, 0x39, -0xd9, 0x73, 0x26, 0xf6, 0xc2, 0x01, 0x0f, 0xb6, 0x04, 0x16, 0x74, 0x03, 0xc1, 0xe0, 0x08, 0x01, -0xc1, 0x81, 0xf9, 0xff, 0xff, 0x00, 0x00, 0x76, 0x0b, 0x89, 0xc8, 0xc1, 0xe8, 0x10, 0x8d, 0x04, -0x01, 0x0f, 0xb7, 0xc8, 0x42, 0x39, 0xda, 0xeb, 0xd8, 0x88, 0x4d, 0xf6, 0xc1, 0xe9, 0x08, 0x88, -0x4d, 0xf7, 0x66, 0x8b, 0x45, 0xf6, 0x5a, 0x5b, 0xf7, 0xd0, 0x0f, 0xb7, 0xc0, 0x5e, 0xc9, 0xc3, -0x55, 0x89, 0xe5, 0x57, 0x56, 0x53, 0x8b, 0x5d, 0x08, 0x68, 0x00, 0x01, 0x00, 0x00, 0x8d, 0x83, -0x00, 0x08, 0x00, 0x00, 0x50, 0x8b, 0x7d, 0x10, 0xe8, 0x08, 0xff, 0xff, 0xff, 0x01, 0xc3, 0x5e, -0xb8, 0xff, 0x00, 0x00, 0x00, 0x5a, 0xc6, 0x83, 0x00, 0x08, 0x00, 0x00, 0x20, 0x81, 0xc3, 0x01, -0x08, 0x00, 0x00, 0x39, 0xf8, 0x7e, 0x02, 0x89, 0xf8, 0x50, 0xff, 0x75, 0x0c, 0xe8, 0xe3, 0xfe, -0xff, 0xff, 0x50, 0xff, 0x75, 0x0c, 0x89, 0xc6, 0x53, 0xe8, 0x0d, 0xff, 0xff, 0xff, 0xc6, 0x04, -0x33, 0x00, 0x8d, 0x65, 0xf4, 0x5b, 0x5e, 0x5f, 0xc9, 0xc3, 0x55, 0x81, 0xfa, 0xff, 0xff, 0x3f, -0x00, 0x89, 0xe5, 0x89, 0xd1, 0x53, 0x89, 0xc3, 0x76, 0x05, 0xb9, 0xff, 0xff, 0x3f, 0x00, 0x8b, -0x83, 0xe0, 0x01, 0x00, 0x00, 0x05, 0x00, 0x04, 0x00, 0x00, 0x39, 0xc1, 0x76, 0x24, 0x8d, 0x91, -0x00, 0xfc, 0xff, 0xff, 0x8d, 0x81, 0x00, 0xfc, 0xff, 0xff, 0x81, 0xfa, 0xff, 0xff, 0x00, 0x00, -0x89, 0x93, 0xe0, 0x01, 0x00, 0x00, 0x66, 0x89, 0x43, 0x02, 0x76, 0x06, 0x66, 0xc7, 0x43, 0x02, -0x00, 0xfc, 0x5b, 0xc9, 0xc3, 0x55, 0x89, 0xe5, 0x56, 0x53, 0x83, 0xec, 0x10, 0x89, 0xc1, 0x8b, -0x55, 0x0c, 0x8b, 0x45, 0x08, 0x8b, 0x5d, 0x10, 0x8b, 0x75, 0x14, 0x89, 0x55, 0xf4, 0x89, 0x45, -0xf0, 0x89, 0x5d, 0xe8, 0x89, 0x75, 0xec, 0x0f, 0xb6, 0x81, 0xe8, 0x01, 0x00, 0x00, 0x83, 0xf8, -0x1f, 0x8b, 0x55, 0x18, 0x7f, 0x35, 0x6b, 0xc0, 0x14, 0x01, 0xc8, 0x8b, 0x5d, 0xf0, 0x8b, 0x75, -0xf4, 0x89, 0x98, 0xd0, 0x02, 0x00, 0x00, 0x89, 0xb0, 0xd4, 0x02, 0x00, 0x00, 0x8b, 0x5d, 0xe8, -0x8b, 0x75, 0xec, 0x89, 0x98, 0xd8, 0x02, 0x00, 0x00, 0x89, 0xb0, 0xdc, 0x02, 0x00, 0x00, 0x89, -0x90, 0xe0, 0x02, 0x00, 0x00, 0xfe, 0x81, 0xe8, 0x01, 0x00, 0x00, 0x4a, 0x75, 0x2e, 0x8b, 0x45, -0xf0, 0x03, 0x45, 0xe8, 0x8b, 0x55, 0xf4, 0x13, 0x55, 0xec, 0x81, 0xfa, 0xff, 0x03, 0x00, 0x00, -0x72, 0x07, 0x76, 0x05, 0x83, 0xca, 0xff, 0xeb, 0x06, 0x0f, 0xac, 0xd0, 0x0a, 0x89, 0xc2, 0x83, -0xc4, 0x10, 0x5b, 0x5e, 0x89, 0xc8, 0xc9, 0xe9, 0x1e, 0xff, 0xff, 0xff, 0x83, 0xc4, 0x10, 0x5b, -0x5e, 0xc9, 0xc3, 0x55, 0x89, 0xe5, 0x8b, 0x45, 0x0c, 0x8b, 0x55, 0x10, 0x89, 0x45, 0x10, 0x8b, -0x45, 0x08, 0x8b, 0x40, 0x10, 0x89, 0x55, 0x0c, 0x89, 0x45, 0x08, 0xc9, 0xe9, 0x9f, 0xfe, 0xff, -0xff, 0x55, 0x89, 0xe5, 0x57, 0x56, 0x53, 0x39, 0xd0, 0x56, 0x56, 0x89, 0xc7, 0x89, 0x55, 0xf0, -0x73, 0x77, 0x8d, 0x58, 0x18, 0x81, 0x7b, 0xe8, 0x4c, 0x42, 0x49, 0x4f, 0x75, 0x60, 0x83, 0x7b, -0xec, 0x18, 0x75, 0x5a, 0xba, 0x18, 0x00, 0x00, 0x00, 0x89, 0xf8, 0xe8, 0x21, 0xfe, 0xff, 0xff, -0x85, 0xc0, 0x75, 0x4a, 0x8b, 0x53, 0xf4, 0x89, 0xd8, 0xe8, 0x13, 0xfe, 0xff, 0xff, 0x3b, 0x43, -0xf8, 0x75, 0x3b, 0x89, 0xde, 0x03, 0x73, 0xf4, 0x39, 0xf3, 0xc7, 0x45, 0xec, 0x00, 0x00, 0x00, -0x00, 0x89, 0xd9, 0x73, 0x1d, 0x89, 0xf0, 0x29, 0xd8, 0x8b, 0x53, 0x04, 0x39, 0xc2, 0x77, 0x12, -0x01, 0xd1, 0xff, 0x45, 0xec, 0x39, 0xf1, 0x73, 0x09, 0x89, 0xf0, 0x29, 0xc8, 0x8b, 0x51, 0x04, -0xeb, 0xea, 0x8b, 0x45, 0xec, 0x3b, 0x43, 0xfc, 0x75, 0x04, 0x89, 0xf8, 0xeb, 0x0d, 0x83, 0xc7, -0x10, 0x83, 0xc3, 0x10, 0x3b, 0x7d, 0xf0, 0x72, 0x8c, 0x31, 0xc0, 0x59, 0x5b, 0x5b, 0x5e, 0x5f, -0xc9, 0xc3, 0x55, 0x89, 0xe5, 0xba, 0x00, 0x10, 0x00, 0x00, 0x53, 0x89, 0xc3, 0x31, 0xc0, 0xe8, -0x5d, 0xff, 0xff, 0xff, 0x85, 0xc0, 0x75, 0x15, 0xba, 0x00, 0x00, 0x10, 0x00, 0xb8, 0x00, 0x00, -0x0f, 0x00, 0xe8, 0x4a, 0xff, 0xff, 0xff, 0x31, 0xd2, 0x85, 0xc0, 0x74, 0x0f, 0xc7, 0x43, 0x24, -0x01, 0x00, 0x00, 0x00, 0x89, 0x43, 0x28, 0xba, 0x01, 0x00, 0x00, 0x00, 0x89, 0xd0, 0x5b, 0xc9, -0xc3, 0x55, 0x89, 0xe5, 0x56, 0x53, 0x68, 0x00, 0x10, 0x00, 0x00, 0x8b, 0x75, 0x08, 0x6a, 0x00, -0xff, 0x76, 0x10, 0xe8, 0xf7, 0xfc, 0xff, 0xff, 0x8b, 0x46, 0x10, 0xc6, 0x00, 0x00, 0x8b, 0x46, -0x10, 0xc6, 0x40, 0x01, 0x19, 0x8b, 0x46, 0x10, 0xc6, 0x40, 0x06, 0x00, 0x66, 0xc7, 0x40, 0x04, -0x00, 0x00, 0x8b, 0x46, 0x10, 0xc6, 0x40, 0x07, 0x50, 0x8b, 0x46, 0x10, 0xc6, 0x40, 0x0e, 0x19, -0x8b, 0x46, 0x10, 0xc6, 0x40, 0x0f, 0x01, 0x66, 0xc7, 0x40, 0x0a, 0x00, 0x00, 0x8b, 0x46, 0x10, -0xc6, 0x80, 0xe8, 0x01, 0x00, 0x00, 0x00, 0x66, 0xc7, 0x40, 0x10, 0x10, 0x00, 0x66, 0xc7, 0x40, -0x02, 0x00, 0x00, 0x8b, 0x46, 0x10, 0x8d, 0x90, 0x00, 0x08, 0x00, 0x00, 0x89, 0x90, 0x28, 0x02, -0x00, 0x00, 0x66, 0xc7, 0x40, 0x20, 0x3f, 0xa3, 0x66, 0xc7, 0x40, 0x22, 0x00, 0x08, 0x68, 0xff, -0x00, 0x00, 0x00, 0x8b, 0x46, 0x0c, 0x83, 0xc0, 0x1c, 0x50, 0xe8, 0x66, 0xfc, 0xff, 0xff, 0x50, -0x89, 0xc3, 0x8b, 0x46, 0x0c, 0x83, 0xc0, 0x1c, 0x50, 0x8b, 0x46, 0x10, 0x05, 0x00, 0x08, 0x00, -0x00, 0x50, 0xe8, 0x84, 0xfc, 0xff, 0xff, 0x83, 0xc4, 0x20, 0x8b, 0x46, 0x10, 0xc6, 0x84, 0x03, -0x00, 0x08, 0x00, 0x00, 0x00, 0x6a, 0x40, 0x6a, 0x00, 0x8b, 0x46, 0x10, 0x83, 0xc0, 0x40, 0x50, -0xe8, 0x4a, 0xfc, 0xff, 0xff, 0x6a, 0x20, 0x6a, 0x00, 0x8b, 0x46, 0x10, 0x83, 0xe8, 0x80, 0x50, -0xe8, 0x3a, 0xfc, 0xff, 0xff, 0x8b, 0x46, 0x10, 0x8b, 0x4e, 0x0c, 0x66, 0xc7, 0x80, 0xa0, 0x00, -0x00, 0x00, 0x00, 0x00, 0x66, 0xc7, 0x40, 0x02, 0x00, 0x00, 0x66, 0xc7, 0x80, 0xf2, 0x01, 0x00, -0x00, 0xff, 0xff, 0x66, 0x8b, 0x51, 0x0c, 0x66, 0x89, 0x90, 0xf8, 0x01, 0x00, 0x00, 0x66, 0x8b, -0x51, 0x0e, 0x66, 0x89, 0x90, 0xfc, 0x01, 0x00, 0x00, 0xc7, 0x80, 0xe0, 0x01, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xc6, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x6a, 0x04, 0x68, 0x59, 0x0f, 0x01, -0x00, 0x8b, 0x46, 0x10, 0x05, 0x02, 0x02, 0x00, 0x00, 0x50, 0xe8, 0xfc, 0xfb, 0xff, 0xff, 0x8b, -0x46, 0x10, 0xc6, 0x80, 0x10, 0x02, 0x00, 0x00, 0x50, 0x66, 0xc7, 0x80, 0x06, 0x02, 0x00, 0x00, -0x01, 0x02, 0x8b, 0x46, 0x10, 0xc6, 0x80, 0x11, 0x02, 0x00, 0x00, 0x00, 0x8b, 0x4e, 0x10, 0xc7, -0x81, 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc7, 0x81, 0x1c, 0x02, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x8b, 0x56, 0x0c, 0x83, 0xc4, 0x24, 0x83, 0x7a, 0x18, 0x00, 0x74, 0x12, 0x8b, -0x42, 0x14, 0x89, 0x81, 0x18, 0x02, 0x00, 0x00, 0x8b, 0x42, 0x18, 0x89, 0x81, 0x1c, 0x02, 0x00, -0x00, 0xc7, 0x46, 0x2c, 0x01, 0x00, 0x00, 0x00, 0x8d, 0x65, 0xf8, 0x5b, 0x5e, 0xc9, 0xc3, 0x55, -0x89, 0xe5, 0x57, 0x56, 0x53, 0x83, 0xec, 0x60, 0xa1, 0x90, 0x10, 0x01, 0x00, 0x89, 0x45, 0xd4, -0x8b, 0x45, 0x08, 0x89, 0x45, 0xc4, 0x8b, 0x45, 0x0c, 0x89, 0x45, 0xc8, 0x8b, 0x45, 0x10, 0x89, -0x45, 0xcc, 0x8b, 0x45, 0x14, 0x89, 0x45, 0xd0, 0x8d, 0x45, 0xc4, 0x50, 0xe8, 0x40, 0xfe, 0xff, -0xff, 0x58, 0x8b, 0x45, 0xc4, 0x31, 0xdb, 0x31, 0xf6, 0x3d, 0x02, 0xb0, 0xad, 0x2b, 0x75, 0x0b, -0xb3, 0x01, 0xc7, 0x45, 0xd8, 0x01, 0x00, 0x00, 0x00, 0xeb, 0x2e, 0x3d, 0x07, 0xb0, 0x11, 0x0a, -0x75, 0x27, 0x8b, 0x45, 0xc8, 0x8b, 0x10, 0xe8, 0x95, 0xfb, 0xff, 0xff, 0x85, 0xc0, 0x75, 0x0e, -0xbb, 0x01, 0x00, 0x00, 0x00, 0xc7, 0x45, 0xdc, 0x01, 0x00, 0x00, 0x00, 0xeb, 0x0b, 0x68, 0x5e, -0x0f, 0x01, 0x00, 0xe8, 0x6f, 0xf9, 0xff, 0xff, 0x5f, 0x81, 0x7d, 0xc4, 0x07, 0xb0, 0x1f, 0x0e, -0x75, 0x03, 0x8b, 0x75, 0xc8, 0x8b, 0x45, 0xcc, 0x85, 0xc0, 0x74, 0x0a, 0x81, 0x38, 0x07, 0xb0, -0x1f, 0x0e, 0x75, 0x02, 0x89, 0xc6, 0x85, 0xdb, 0x0f, 0x85, 0x11, 0x01, 0x00, 0x00, 0x85, 0xf6, -0x0f, 0x84, 0xd1, 0x00, 0x00, 0x00, 0x66, 0x83, 0x7e, 0x08, 0x00, 0xc7, 0x45, 0xc0, 0x00, 0x00, -0x00, 0x00, 0x74, 0x0d, 0x8b, 0x56, 0x04, 0x89, 0xf0, 0xe8, 0x33, 0xfb, 0xff, 0xff, 0x89, 0x45, -0xc0, 0x89, 0xf3, 0x31, 0xff, 0x8d, 0x4e, 0x0c, 0x03, 0x5e, 0x04, 0x39, 0xd9, 0x73, 0x21, 0x8b, -0x01, 0x83, 0xc0, 0x03, 0x83, 0xe0, 0xfc, 0x8d, 0x54, 0x01, 0x0c, 0x8b, 0x41, 0x04, 0x83, 0xc0, -0x03, 0x83, 0xe0, 0xfc, 0x8d, 0x04, 0x02, 0x39, 0xd8, 0x77, 0x05, 0x47, 0x89, 0xc1, 0xeb, 0xdb, -0x81, 0x3e, 0x07, 0xb0, 0x1f, 0x0e, 0x75, 0x1d, 0x83, 0x7d, 0xc0, 0x00, 0x75, 0x17, 0x0f, 0xb7, -0x46, 0x0a, 0x39, 0xf8, 0x75, 0x0f, 0xc7, 0x45, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x89, 0x75, 0xcc, -0xe9, 0x9a, 0x00, 0x00, 0x00, 0x68, 0x81, 0x0f, 0x01, 0x00, 0xe8, 0xc8, 0xf8, 0xff, 0xff, 0x59, -0xff, 0x75, 0xc0, 0x68, 0x9b, 0x0f, 0x01, 0x00, 0xe8, 0xba, 0xf8, 0xff, 0xff, 0x58, 0x5a, 0x57, -0x68, 0xad, 0x0f, 0x01, 0x00, 0xe8, 0xad, 0xf8, 0xff, 0xff, 0x5f, 0x58, 0x56, 0x68, 0xbf, 0x0f, -0x01, 0x00, 0xe8, 0xa0, 0xf8, 0xff, 0xff, 0x59, 0x5b, 0xff, 0x76, 0x04, 0x68, 0xd1, 0x0f, 0x01, -0x00, 0xe8, 0x91, 0xf8, 0xff, 0xff, 0x58, 0x5a, 0xff, 0x36, 0x68, 0xe3, 0x0f, 0x01, 0x00, 0xe8, -0x83, 0xf8, 0xff, 0xff, 0x5f, 0x58, 0x0f, 0xb7, 0x46, 0x0a, 0x50, 0x68, 0xf5, 0x0f, 0x01, 0x00, -0xe8, 0x72, 0xf8, 0xff, 0xff, 0x5b, 0x5e, 0x68, 0x07, 0x10, 0x01, 0x00, 0xe8, 0x66, 0xf8, 0xff, -0xff, 0x59, 0xff, 0x75, 0xc4, 0x68, 0x22, 0x10, 0x01, 0x00, 0xe8, 0x58, 0xf8, 0xff, 0xff, 0x58, -0x5a, 0xff, 0x75, 0xc8, 0x68, 0x2b, 0x10, 0x01, 0x00, 0xe8, 0x49, 0xf8, 0xff, 0xff, 0x5e, 0x5f, -0xff, 0x75, 0xcc, 0x68, 0x34, 0x10, 0x01, 0x00, 0xe8, 0x3a, 0xf8, 0xff, 0xff, 0x59, 0x5b, 0x31, -0xc0, 0x83, 0x7d, 0xe0, 0x00, 0xc7, 0x45, 0xe4, 0x00, 0x00, 0x00, 0x00, 0xc7, 0x45, 0xe8, 0x00, -0x00, 0x00, 0x00, 0x0f, 0x84, 0x22, 0x01, 0x00, 0x00, 0x8b, 0x45, 0xcc, 0x89, 0xc6, 0xc7, 0x45, -0xb8, 0x00, 0x00, 0x00, 0x00, 0xc7, 0x45, 0xbc, 0x00, 0x00, 0x00, 0x00, 0x8d, 0x58, 0x0c, 0x03, -0x70, 0x04, 0x39, 0xf3, 0x73, 0x41, 0x8b, 0x0b, 0x8d, 0x51, 0x03, 0x8b, 0x43, 0x04, 0x83, 0xe2, -0xfc, 0x83, 0xc0, 0x03, 0x8d, 0x7b, 0x0c, 0x83, 0xe0, 0xfc, 0x8d, 0x14, 0x17, 0x8d, 0x04, 0x02, -0x39, 0xf0, 0x89, 0x45, 0xb4, 0x77, 0x20, 0x83, 0x7b, 0x08, 0x01, 0x75, 0x15, 0x85, 0xc9, 0x75, -0x11, 0x6a, 0x00, 0x6a, 0x00, 0x57, 0xe8, 0xa3, 0xf9, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, 0xc0, -0x74, 0x09, 0x8b, 0x5d, 0xb4, 0xeb, 0xbb, 0x31, 0xdb, 0xeb, 0x04, 0x85, 0xdb, 0x75, 0x09, 0xc7, -0x45, 0xb8, 0x00, 0x00, 0x00, 0x00, 0xeb, 0x0e, 0x8b, 0x03, 0x83, 0xc0, 0x03, 0x83, 0xe0, 0xfc, -0x8d, 0x04, 0x07, 0x89, 0x45, 0xbc, 0x85, 0xdb, 0x0f, 0x84, 0x9a, 0x00, 0x00, 0x00, 0x83, 0x7b, -0x04, 0x07, 0x75, 0x1f, 0x6a, 0x07, 0x68, 0x74, 0x10, 0x01, 0x00, 0xff, 0x75, 0xbc, 0xe8, 0x5b, -0xf9, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, 0xc0, 0x75, 0x09, 0xc7, 0x45, 0xe4, 0x01, 0x00, 0x00, -0x00, 0xeb, 0x59, 0x85, 0xdb, 0x74, 0x71, 0x83, 0x7b, 0x04, 0x0a, 0x75, 0x25, 0x6a, 0x0a, 0x68, -0x69, 0x10, 0x01, 0x00, 0xff, 0x75, 0xbc, 0xe8, 0x32, 0xf9, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, -0xc0, 0x75, 0x0f, 0x8d, 0x45, 0xc4, 0xe8, 0x97, 0xfb, 0xff, 0xff, 0x85, 0xc0, 0x89, 0x45, 0xb8, -0x75, 0x46, 0x85, 0xdb, 0x74, 0x42, 0x83, 0x7b, 0x04, 0x00, 0x74, 0x20, 0x85, 0xdb, 0x74, 0x38, -0x83, 0x7b, 0x04, 0x01, 0x75, 0x1f, 0x6a, 0x01, 0x68, 0x9a, 0x0f, 0x01, 0x00, 0xff, 0x75, 0xbc, -0xe8, 0xf9, 0xf8, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, 0xc0, 0x75, 0x09, 0xc7, 0x45, 0xb8, 0x01, -0x00, 0x00, 0x00, 0xeb, 0x13, 0x85, 0xdb, 0x74, 0x0f, 0xff, 0x75, 0xbc, 0x68, 0x3e, 0x10, 0x01, -0x00, 0xe8, 0x01, 0xf7, 0xff, 0xff, 0x58, 0x5a, 0x8b, 0x45, 0xb8, 0x85, 0xc0, 0x75, 0x13, 0x8d, -0x45, 0xc4, 0xe8, 0x3b, 0xfb, 0xff, 0xff, 0x85, 0xc0, 0x75, 0x07, 0xc7, 0x45, 0xe4, 0x01, 0x00, -0x00, 0x00, 0x68, 0x59, 0x10, 0x01, 0x00, 0xe8, 0xdb, 0xf6, 0xff, 0xff, 0x83, 0x7d, 0xe8, 0x00, -0x5f, 0x74, 0x0b, 0x68, 0x68, 0x10, 0x01, 0x00, 0xe8, 0xca, 0xf6, 0xff, 0xff, 0x5e, 0x83, 0x7d, -0xe4, 0x00, 0x74, 0x0b, 0x68, 0x73, 0x10, 0x01, 0x00, 0xe8, 0xb9, 0xf6, 0xff, 0xff, 0x5b, 0x68, -0x99, 0x0f, 0x01, 0x00, 0xe8, 0xae, 0xf6, 0xff, 0xff, 0x83, 0x7d, 0xe8, 0x00, 0x59, 0x0f, 0x84, -0x84, 0x00, 0x00, 0x00, 0x8b, 0x45, 0xec, 0x8d, 0x50, 0x18, 0x8b, 0x40, 0x0c, 0x01, 0xd0, 0x39, -0xc2, 0x89, 0x45, 0xb0, 0x89, 0xd3, 0x73, 0x70, 0x29, 0xd8, 0x8b, 0x53, 0x04, 0x39, 0xc2, 0x77, -0x67, 0x83, 0x3b, 0x01, 0x75, 0x55, 0x8d, 0x42, 0xf8, 0xba, 0x14, 0x00, 0x00, 0x00, 0x89, 0xd1, -0x31, 0xd2, 0xf7, 0xf1, 0x31, 0xff, 0x39, 0xc7, 0x89, 0x45, 0xac, 0x7d, 0x37, 0x31, 0xf6, 0x31, -0xd2, 0x83, 0x7c, 0x1e, 0x18, 0x01, 0x0f, 0x95, 0xc2, 0x42, 0x52, 0xff, 0x74, 0x1e, 0x14, 0xff, -0x74, 0x1e, 0x10, 0xff, 0x74, 0x1e, 0x0c, 0xff, 0x74, 0x1e, 0x08, 0x8b, 0x45, 0xd4, 0x47, 0xe8, -0x41, 0xf9, 0xff, 0xff, 0x83, 0xc6, 0x14, 0x83, 0xc4, 0x14, 0x3b, 0x7d, 0xac, 0x7d, 0x05, 0x83, -0xff, 0x1f, 0x7e, 0xcb, 0xc7, 0x45, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x03, 0x5b, 0x04, 0x3b, 0x5d, -0xb0, 0x73, 0x05, 0x8b, 0x45, 0xb0, 0xeb, 0x90, 0x83, 0x7d, 0xe4, 0x00, 0x0f, 0x84, 0x94, 0x00, -0x00, 0x00, 0x6a, 0x20, 0x68, 0xc4, 0x51, 0x01, 0x00, 0xe8, 0xee, 0xf3, 0xff, 0xff, 0x31, 0xf6, -0x5f, 0x39, 0xc6, 0x5a, 0xa3, 0xc0, 0x51, 0x01, 0x00, 0x7d, 0x47, 0x31, 0xdb, 0x83, 0xbb, 0xd4, -0x51, 0x01, 0x00, 0x01, 0x75, 0x07, 0xc7, 0x45, 0xf0, 0x00, 0x00, 0x00, 0x00, 0xff, 0xb3, 0xd4, -0x51, 0x01, 0x00, 0xff, 0xb3, 0xd0, 0x51, 0x01, 0x00, 0xff, 0xb3, 0xcc, 0x51, 0x01, 0x00, 0xff, -0xb3, 0xc8, 0x51, 0x01, 0x00, 0xff, 0xb3, 0xc4, 0x51, 0x01, 0x00, 0x8b, 0x45, 0xd4, 0x46, 0xe8, -0xc1, 0xf8, 0xff, 0xff, 0x83, 0xc3, 0x14, 0x83, 0xc4, 0x14, 0x3b, 0x35, 0xc0, 0x51, 0x01, 0x00, -0x7c, 0xbb, 0x8b, 0x5d, 0xd4, 0xe8, 0xeb, 0xf3, 0xff, 0xff, 0x89, 0x83, 0xe0, 0x01, 0x00, 0x00, -0x8b, 0x5d, 0xd4, 0xe8, 0x26, 0xf4, 0xff, 0xff, 0x66, 0x89, 0x43, 0x02, 0x8b, 0x45, 0xd4, 0x83, -0xb8, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x75, 0x07, 0x66, 0x83, 0x78, 0x02, 0x00, 0x74, 0x07, 0xc7, -0x45, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x83, 0x7d, 0xd8, 0x00, 0x0f, 0x84, 0x8a, 0x00, 0x00, 0x00, -0x83, 0x7d, 0xf0, 0x00, 0x8b, 0x75, 0xc8, 0x74, 0x16, 0xf6, 0x06, 0x01, 0x74, 0x11, 0x8b, 0x56, -0x08, 0x81, 0xc2, 0x00, 0x04, 0x00, 0x00, 0x8b, 0x45, 0xd4, 0xe8, 0x0b, 0xf8, 0xff, 0xff, 0xf6, -0x06, 0x04, 0x74, 0x10, 0x6a, 0xff, 0xff, 0x76, 0x10, 0xff, 0x75, 0xd4, 0xe8, 0x9f, 0xf7, 0xff, -0xff, 0x83, 0xc4, 0x0c, 0x83, 0x7d, 0xf0, 0x00, 0x74, 0x3b, 0xf6, 0x06, 0x40, 0x74, 0x36, 0x8b, -0x5e, 0x30, 0x8b, 0x45, 0xd4, 0x89, 0xdf, 0x8b, 0x4b, 0xfc, 0x89, 0x45, 0xa8, 0x03, 0x7e, 0x2c, -0x89, 0x4d, 0xa4, 0x39, 0xfb, 0x73, 0x1e, 0xff, 0x73, 0x10, 0xff, 0x73, 0x0c, 0xff, 0x73, 0x08, -0xff, 0x73, 0x04, 0xff, 0x33, 0x8b, 0x45, 0xa8, 0xe8, 0x08, 0xf8, 0xff, 0xff, 0x83, 0xc4, 0x14, -0x03, 0x5d, 0xa4, 0xeb, 0xde, 0xf6, 0x06, 0x41, 0x0f, 0x84, 0x51, 0x01, 0x00, 0x00, 0xc7, 0x45, -0xf0, 0x00, 0x00, 0x00, 0x00, 0xe9, 0x45, 0x01, 0x00, 0x00, 0x83, 0x7d, 0xdc, 0x00, 0x0f, 0x84, -0xc9, 0x00, 0x00, 0x00, 0x8b, 0x5d, 0xc8, 0x8b, 0x43, 0x0c, 0x85, 0xc0, 0x74, 0x0f, 0x50, 0xff, -0x73, 0x08, 0xff, 0x75, 0xd4, 0xe8, 0x26, 0xf7, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x8b, 0x7b, 0x14, -0x8b, 0x73, 0x10, 0x85, 0xff, 0x0f, 0x84, 0x14, 0x01, 0x00, 0x00, 0x83, 0x3e, 0x01, 0x0f, 0x85, -0x8d, 0x00, 0x00, 0x00, 0x83, 0x7d, 0xf0, 0x00, 0x0f, 0x84, 0x83, 0x00, 0x00, 0x00, 0x8b, 0x45, -0xd4, 0xba, 0x14, 0x00, 0x00, 0x00, 0x89, 0x45, 0xa0, 0x8b, 0x46, 0x04, 0x83, 0xe8, 0x08, 0x89, -0xd1, 0x31, 0xd2, 0xf7, 0xf1, 0xc7, 0x45, 0x9c, 0x00, 0x00, 0x00, 0x00, 0x39, 0x45, 0x9c, 0x89, -0x45, 0x98, 0x7d, 0x56, 0x31, 0xdb, 0x8b, 0x44, 0x33, 0x18, 0x83, 0xf8, 0x03, 0xba, 0x03, 0x00, -0x00, 0x00, 0x74, 0x16, 0x77, 0x05, 0xb2, 0x01, 0x48, 0xeb, 0x08, 0xba, 0x04, 0x00, 0x00, 0x00, -0x83, 0xf8, 0x04, 0x74, 0x05, 0xba, 0x02, 0x00, 0x00, 0x00, 0x52, 0xff, 0x74, 0x33, 0x14, 0xff, -0x74, 0x33, 0x10, 0xff, 0x74, 0x33, 0x0c, 0xff, 0x74, 0x33, 0x08, 0x8b, 0x45, 0xa0, 0xe8, 0x42, -0xf7, 0xff, 0xff, 0xff, 0x45, 0x9c, 0x8b, 0x45, 0x98, 0x83, 0xc4, 0x14, 0x83, 0xc3, 0x14, 0x39, -0x45, 0x9c, 0x7d, 0x06, 0x83, 0x7d, 0x9c, 0x1f, 0x7e, 0xac, 0xc7, 0x45, 0xf0, 0x00, 0x00, 0x00, -0x00, 0x8b, 0x46, 0x04, 0x01, 0xc6, 0x29, 0xc7, 0xe9, 0x58, 0xff, 0xff, 0xff, 0x83, 0x7d, 0xe0, -0x00, 0x74, 0x6c, 0x8b, 0x45, 0xcc, 0x89, 0xc6, 0x8d, 0x58, 0x0c, 0x03, 0x70, 0x04, 0x39, 0xf3, -0x73, 0x5d, 0x8b, 0x13, 0x8d, 0x42, 0x03, 0x83, 0xe0, 0xfc, 0x8d, 0x4b, 0x0c, 0x8d, 0x3c, 0x01, -0x8b, 0x43, 0x04, 0x83, 0xc0, 0x03, 0x83, 0xe0, 0xfc, 0x8d, 0x04, 0x07, 0x39, 0xf0, 0x89, 0x45, -0x94, 0x77, 0x3c, 0xa1, 0x84, 0x10, 0x01, 0x00, 0x39, 0x43, 0x08, 0x75, 0x2d, 0x3b, 0x15, 0x7c, -0x10, 0x01, 0x00, 0x75, 0x25, 0x52, 0xff, 0x35, 0x80, 0x10, 0x01, 0x00, 0x51, 0xe8, 0x9c, 0xf5, -0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, 0xc0, 0x75, 0x11, 0x57, 0xff, 0x73, 0x04, 0x8d, 0x4d, 0xc4, -0x51, 0xff, 0x15, 0x88, 0x10, 0x01, 0x00, 0x83, 0xc4, 0x0c, 0x8b, 0x5d, 0x94, 0xeb, 0x9f, 0xb0, -0x80, 0xe6, 0x70, 0x31, 0xc0, 0xe6, 0xf0, 0xe6, 0xf1, 0xb0, 0x11, 0xe6, 0x20, 0xe6, 0xa0, 0xb0, -0x20, 0xe6, 0x21, 0xb0, 0x28, 0xe6, 0xa1, 0xb0, 0x04, 0xe6, 0x21, 0xb0, 0x02, 0xe6, 0xa1, 0xb0, -0x01, 0xe6, 0x21, 0xe6, 0xa1, 0xb0, 0xff, 0xe6, 0xa1, 0xb0, 0xfb, 0xe6, 0x21, 0x8b, 0x45, 0xd4, -0x8d, 0x65, 0xf4, 0x5b, 0x5e, 0x5f, 0xc9, 0xc3, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, -0x38, 0x39, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x00, 0x48, 0x64, 0x72, 0x53, 0x00, 0x42, 0x61, -0x64, 0x20, 0x75, 0x6e, 0x69, 0x66, 0x6f, 0x72, 0x6d, 0x20, 0x62, 0x6f, 0x6f, 0x74, 0x20, 0x68, -0x65, 0x61, 0x64, 0x65, 0x72, 0x20, 0x63, 0x68, 0x65, 0x63, 0x6b, 0x73, 0x75, 0x6d, 0x21, 0x0a, -0x00, 0x42, 0x61, 0x64, 0x20, 0x45, 0x4c, 0x46, 0x20, 0x70, 0x61, 0x72, 0x61, 0x6d, 0x65, 0x74, -0x65, 0x72, 0x20, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x21, 0x0a, 0x00, 0x20, 0x20, 0x20, 0x63, 0x68, -0x65, 0x63, 0x6b, 0x73, 0x75, 0x6d, 0x20, 0x3d, 0x20, 0x25, 0x78, 0x0a, 0x00, 0x20, 0x20, 0x20, -0x20, 0x20, 0x20, 0x63, 0x6f, 0x75, 0x6e, 0x74, 0x20, 0x3d, 0x20, 0x25, 0x78, 0x0a, 0x00, 0x20, -0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x68, 0x64, 0x72, 0x20, 0x3d, 0x20, 0x25, 0x78, 0x0a, -0x00, 0x20, 0x20, 0x20, 0x20, 0x20, 0x62, 0x5f, 0x73, 0x69, 0x7a, 0x65, 0x20, 0x3d, 0x20, 0x25, -0x78, 0x0a, 0x00, 0x62, 0x5f, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x74, 0x75, 0x72, 0x65, 0x20, 0x3d, -0x20, 0x25, 0x78, 0x0a, 0x00, 0x20, 0x20, 0x62, 0x5f, 0x72, 0x65, 0x63, 0x6f, 0x72, 0x64, 0x73, -0x20, 0x3d, 0x20, 0x25, 0x78, 0x0a, 0x00, 0x55, 0x6e, 0x6b, 0x6e, 0x6f, 0x77, 0x6e, 0x20, 0x62, -0x6f, 0x6f, 0x74, 0x6c, 0x6f, 0x61, 0x64, 0x65, 0x72, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x21, -0x0a, 0x00, 0x74, 0x79, 0x70, 0x65, 0x3d, 0x25, 0x78, 0x0a, 0x00, 0x64, 0x61, 0x74, 0x61, 0x3d, -0x25, 0x78, 0x0a, 0x00, 0x70, 0x61, 0x72, 0x61, 0x6d, 0x3d, 0x25, 0x78, 0x0a, 0x00, 0x55, 0x6e, -0x6b, 0x6e, 0x6f, 0x77, 0x6e, 0x20, 0x66, 0x69, 0x72, 0x6d, 0x77, 0x61, 0x72, 0x65, 0x20, 0x74, -0x79, 0x70, 0x65, 0x3a, 0x20, 0x25, 0x73, 0x0a, 0x00, 0x46, 0x69, 0x72, 0x6d, 0x77, 0x61, 0x72, -0x65, 0x20, 0x74, 0x79, 0x70, 0x65, 0x3a, 0x00, 0x20, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x42, 0x49, -0x4f, 0x53, 0x00, 0x20, 0x50, 0x43, 0x42, 0x49, 0x4f, 0x53, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x9a, 0x0f, 0x01, 0x00, 0x04, 0x00, 0x00, 0x00, 0x53, 0x06, 0x01, 0x00, 0xc0, 0x51, 0x01, 0x00, -0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xa5, 0xa5, 0xa5, 0xa5, 0x70, 0x00, 0x00, 0x00, 0xa8, 0x10, 0x01, 0x00, 0x00, 0x00, 0x00, 0x03, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x4f, 0x4f, 0x54, -0x5f, 0x49, 0x4d, 0x41, 0x47, 0x45, 0x3d, 0x68, 0x65, 0x61, 0x64, 0x2e, 0x53, 0x20, 0x63, 0x6f, -0x6e, 0x73, 0x6f, 0x6c, 0x65, 0x3d, 0x74, 0x74, 0x79, 0x53, 0x30, 0x20, 0x69, 0x70, 0x3d, 0x64, -0x68, 0x63, 0x70, 0x20, 0x72, 0x6f, 0x6f, 0x74, 0x3d, 0x2f, 0x64, 0x65, 0x76, 0x2f, 0x6e, 0x66, -0x73, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, diff --git a/util/mkelfImage/linux-i386/convert.h b/util/mkelfImage/linux-i386/convert.h deleted file mode 100644 index de2c11ee04..0000000000 --- a/util/mkelfImage/linux-i386/convert.h +++ /dev/null @@ -1,34 +0,0 @@ - -/* Hard coded locations */ -#define CONVERTLOC 0x10000 -#define REAL_MODE_DATA_LOC 0x20000 -#define GDTLOC 0x21000 -#define GDT64LOC 0x22000 -#define PGTLOC 0x23000 - -#define DEFAULT_ROOT_DEV ((0x3<<8)| 0) - -#define CMDLINE_MAX 256 - -#ifdef ASSEMBLY -#define CONVERT_MAGIC 0xA5A5A5A5 -#else -#define CONVERT_MAGIC 0xA5A5A5A5UL -#endif - -#ifndef ASSEMBLY -struct image_parameters { - uint32_t convert_magic; /* a signature to verify mkelfImage was built properly */ - uint32_t gdt_size; - uint32_t gdt64_size; - uint32_t pgt_size; - uint32_t bss_size; - uint16_t ramdisk_flags; - uint16_t root_dev; - uint32_t entry; - uint32_t switch_64; - uint32_t initrd_start; - uint32_t initrd_size; - uint8_t cmdline[CMDLINE_MAX]; -}; -#endif diff --git a/util/mkelfImage/linux-i386/convert.lds b/util/mkelfImage/linux-i386/convert.lds deleted file mode 100644 index 59cd714aa6..0000000000 --- a/util/mkelfImage/linux-i386/convert.lds +++ /dev/null @@ -1,36 +0,0 @@ -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) - - -ENTRY(startup_32) -SECTIONS -{ - . = 0x10000; - _text = .; /* Text and read-only data */ - .text . : { - *(.text) - *(.text.*) - } = 0x9090 - .rodata (.): { - *(.rodata) - *(.rodata.*) - } - _etext = .; /* End of text section */ - .data (.): { /* Data */ - *(.data) - *(.data.*) - *(.trailer) - } - _edata = .; /* End of data section */ - _bss = .; /* BSS */ - .bss (.): { - *(.bss) - } - _end = . ; - bss_sizex = _end - _bss; - - /DISCARD/ : { - *(.comment) - *(.note) - } -} diff --git a/util/mkelfImage/linux-i386/convert_params.c b/util/mkelfImage/linux-i386/convert_params.c deleted file mode 100644 index f39e8e027c..0000000000 --- a/util/mkelfImage/linux-i386/convert_params.c +++ /dev/null @@ -1,1568 +0,0 @@ -#include <stdarg.h> -#include <limits.h> -#include "arch/io.h" -#include "stdint.h" -#include "uniform_boot.h" -#include "linuxbios_tables.h" -#include "elf_boot.h" -#include "convert.h" -#define STACK_SIZE (4096) - -#define __unused __attribute__ ((unused)) - -long user_stack [STACK_SIZE] = { 0 }; - -unsigned long * stack_start = & user_stack[STACK_SIZE]; - -/* FIXME expand on drive_info_)struct... */ -struct drive_info_struct { - uint8_t dummy[32]; -}; -struct sys_desc_table { - uint16_t length; - uint8_t table[318]; -}; - -/* - * These are set up by the setup-routine at boot-time: - */ - -struct screen_info { - uint8_t orig_x; /* 0x00 */ - uint8_t orig_y; /* 0x01 */ - uint16_t dontuse1; /* 0x02 -- EXT_MEM_K sits here */ - uint16_t orig_video_page; /* 0x04 */ - uint8_t orig_video_mode; /* 0x06 */ - uint8_t orig_video_cols; /* 0x07 */ - uint16_t unused2; /* 0x08 */ - uint16_t orig_video_ega_bx; /* 0x0a */ - uint16_t unused3; /* 0x0c */ - uint8_t orig_video_lines; /* 0x0e */ - uint8_t orig_video_isVGA; /* 0x0f */ - uint16_t orig_video_points; /* 0x10 */ - - /* VESA graphic mode -- linear frame buffer */ - uint16_t lfb_width; /* 0x12 */ - uint16_t lfb_height; /* 0x14 */ - uint16_t lfb_depth; /* 0x16 */ - uint32_t lfb_base; /* 0x18 */ - uint32_t lfb_size; /* 0x1c */ - uint16_t dontuse2, dontuse3; /* 0x20 -- CL_MAGIC and CL_OFFSET here */ - uint16_t lfb_linelength; /* 0x24 */ - uint8_t red_size; /* 0x26 */ - uint8_t red_pos; /* 0x27 */ - uint8_t green_size; /* 0x28 */ - uint8_t green_pos; /* 0x29 */ - uint8_t blue_size; /* 0x2a */ - uint8_t blue_pos; /* 0x2b */ - uint8_t rsvd_size; /* 0x2c */ - uint8_t rsvd_pos; /* 0x2d */ - uint16_t vesapm_seg; /* 0x2e */ - uint16_t vesapm_off; /* 0x30 */ - uint16_t pages; /* 0x32 */ -}; - - -#define PAGE_SIZE 4096 - - -#define E820MAP 0x2d0 /* our map */ -#define E820MAX 32 /* number of entries in E820MAP */ -#define E820NR 0x1e8 /* # entries in E820MAP */ - - -struct e820entry { - unsigned long long addr; /* start of memory segment */ - unsigned long long size; /* size of memory segment */ - unsigned long type; /* type of memory segment */ -#define E820_RAM 1 -#define E820_RESERVED 2 -#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */ -#define E820_NVS 4 -}; - -struct e820map { - int nr_map; - struct e820entry map[E820MAX]; -}; - - -struct apm_bios_info { - uint16_t version; /* 0x40 */ - uint16_t cseg; /* 0x42 */ - uint32_t offset; /* 0x44 */ - uint16_t cseg_16; /* 0x48 */ - uint16_t dseg; /* 0x4a */ - uint16_t flags; /* 0x4c */ - uint16_t cseg_len; /* 0x4e */ - uint16_t cseg_16_len; /* 0x50 */ - uint16_t dseg_len; /* 0x52 */ - uint8_t reserved[44]; /* 0x54 */ -}; - - -struct parameters { - uint8_t orig_x; /* 0x00 */ - uint8_t orig_y; /* 0x01 */ - uint16_t ext_mem_k; /* 0x02 -- EXT_MEM_K sits here */ - uint16_t orig_video_page; /* 0x04 */ - uint8_t orig_video_mode; /* 0x06 */ - uint8_t orig_video_cols; /* 0x07 */ - uint16_t unused2; /* 0x08 */ - uint16_t orig_video_ega_bx; /* 0x0a */ - uint16_t unused3; /* 0x0c */ - uint8_t orig_video_lines; /* 0x0e */ - uint8_t orig_video_isVGA; /* 0x0f */ - uint16_t orig_video_points; /* 0x10 */ - - /* VESA graphic mode -- linear frame buffer */ - uint16_t lfb_width; /* 0x12 */ - uint16_t lfb_height; /* 0x14 */ - uint16_t lfb_depth; /* 0x16 */ - uint32_t lfb_base; /* 0x18 */ - uint32_t lfb_size; /* 0x1c */ - uint16_t cl_magic; /* 0x20 */ -#define CL_MAGIC_VALUE 0xA33F - uint16_t cl_offset; /* 0x22 */ - uint16_t lfb_linelength; /* 0x24 */ - uint8_t red_size; /* 0x26 */ - uint8_t red_pos; /* 0x27 */ - uint8_t green_size; /* 0x28 */ - uint8_t green_pos; /* 0x29 */ - uint8_t blue_size; /* 0x2a */ - uint8_t blue_pos; /* 0x2b */ - uint8_t rsvd_size; /* 0x2c */ - uint8_t rsvd_pos; /* 0x2d */ - uint16_t vesapm_seg; /* 0x2e */ - uint16_t vesapm_off; /* 0x30 */ - uint16_t pages; /* 0x32 */ - uint8_t reserved4[12]; /* 0x34 -- 0x3f reserved for future expansion */ - - struct apm_bios_info apm_bios_info; /* 0x40 */ - struct drive_info_struct drive_info; /* 0x80 */ - struct sys_desc_table sys_desc_table; /* 0xa0 */ - uint32_t alt_mem_k; /* 0x1e0 */ - uint8_t reserved5[4]; /* 0x1e4 */ - uint8_t e820_map_nr; /* 0x1e8 */ - uint8_t reserved6[9]; /* 0x1e9 */ - uint16_t mount_root_rdonly; /* 0x1f2 */ - uint8_t reserved7[4]; /* 0x1f4 */ - uint16_t ramdisk_flags; /* 0x1f8 */ -#define RAMDISK_IMAGE_START_MASK 0x07FF -#define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 - uint8_t reserved8[2]; /* 0x1fa */ - uint16_t orig_root_dev; /* 0x1fc */ - uint8_t reserved9[1]; /* 0x1fe */ - uint8_t aux_device_info; /* 0x1ff */ - uint8_t reserved10[2]; /* 0x200 */ - uint8_t param_block_signature[4]; /* 0x202 */ - uint16_t param_block_version; /* 0x206 */ - uint8_t reserved11[8]; /* 0x208 */ - uint8_t loader_type; /* 0x210 */ -#define LOADER_TYPE_LOADLIN 1 -#define LOADER_TYPE_BOOTSECT_LOADER 2 -#define LOADER_TYPE_SYSLINUX 3 -#define LOADER_TYPE_ETHERBOOT 4 -#define LOADER_TYPE_KERNEL 5 - uint8_t loader_flags; /* 0x211 */ - uint8_t reserved12[2]; /* 0x212 */ - uint32_t kernel_start; /* 0x214 */ - uint32_t initrd_start; /* 0x218 */ - uint32_t initrd_size; /* 0x21c */ - uint8_t reserved13[4]; /* 0x220 */ - /* 2.01+ */ - uint16_t heap_end_ptr; /* 0x224 */ - uint8_t reserved14[2]; /* 0x226 */ - /* 2.02+ */ - uint32_t cmd_line_ptr; /* 0x228 */ - /* 2.03+ */ - uint32_t initrd_addr_max; /* 0x22c */ - /* 2.05+ */ - uint32_t kernel_alignment; /* 0x230 */ - uint8_t relocateable_kernel; /* 0x234 */ - uint8_t reserved15[0x2d0 - 0x235]; /* 0x235 */ - - struct e820entry e820_map[E820MAX]; /* 0x2d0 */ - uint8_t reserved16[688]; /* 0x550 */ -#define COMMAND_LINE_SIZE 256 - uint8_t command_line[COMMAND_LINE_SIZE]; /* 0x800 */ - uint8_t reserved17[1792]; /* 0x900 - 0x1000 */ -}; - -/* Keep track of which information I need to acquire. */ -struct param_info { - unsigned type; - void *data; - Elf_Bhdr *param; - struct image_parameters *image; - struct parameters *real_mode; - /* bootloader type */ - int has_multiboot; - int has_uniform_boot; - int has_elf_boot; - /* firmware type */ - int has_pcbios; - int has_linuxbios; - struct lb_header *lb_table; - /* machine information needed */ - int need_mem_sizes; -}; -/* - * This is set up by the setup-routine at boot-time - */ - - -#undef memcmp -#undef memset -#undef memcpy -#define memzero(s, n) memset ((s), 0, (n)) - - -/* FIXME handle systems with large EBDA's */ -static struct parameters *faked_real_mode = (void *)REAL_MODE_DATA_LOC; - - - -/* - * Output - * ============================================================================= - */ - -/* Base Address */ -#define TTYS0 0x3f8 -#define TTYS0_LSR (TTYS0+0x05) -#define TTYS0_TBR (TTYS0+0x00) - -static void ttys0_tx_byte(unsigned byte) -{ - /* Wait until I can send a byte */ - while((inb(TTYS0_LSR) & 0x20) == 0) - ; - outb(byte, TTYS0_TBR); - /* Wait until the byte is transmitted */ - while(!(inb(TTYS0_LSR) & 0x40)) - ; -} -static void put_char_serial(int c) -{ - if (c == '\n') { - ttys0_tx_byte('\r'); - } - ttys0_tx_byte(c); -} - -static void putchar(int c) -{ -#if 0 - put_char_video(c); -#endif - put_char_serial(c); -} - -#define LONG_LONG_SHIFT ((int)((sizeof(unsigned long long)*CHAR_BIT) - 4)) -#define LONG_SHIFT ((int)((sizeof(unsigned long)*CHAR_BIT) - 4)) -#define INT_SHIFT ((int)((sizeof(unsigned int)*CHAR_BIT) - 4)) -#define SHRT_SHIFT ((int)((sizeof(unsigned short)*CHAR_BIT) - 4)) -#define CHAR_SHIFT ((int)((sizeof(unsigned char)*CHAR_BIT) - 4)) - -/************************************************************************** -PRINTF and friends - - Formats: - %x - 4 bytes int (8 hex digits, lower case) - %X - 4 bytes int (8 hex digits, upper case) - %lx - 8 bytes long (16 hex digits, lower case) - %lX - 8 bytes long (16 hex digits, upper case) - %hx - 2 bytes int (4 hex digits, lower case) - %hX - 2 bytes int (4 hex digits, upper case) - %hhx - 1 byte int (2 hex digits, lower case) - %hhX - 1 byte int (2 hex digits, upper case) - - optional # prefixes 0x or 0X - %d - decimal int - %c - char - %s - string - Note: width specification not supported -**************************************************************************/ -static void printf(const char *fmt, ...) -{ - va_list args; - char *p; - va_start(args, fmt); - for ( ; *fmt != '\0'; ++fmt) { - if (*fmt != '%') { - putchar(*fmt); - continue; - } - if (*++fmt == 's') { - for(p = va_arg(args, char *); *p != '\0'; p++) - putchar(*p); - } - else { /* Length of item is bounded */ - char tmp[40], *q = tmp; - int shift = INT_SHIFT; - if (*fmt == 'L') { - shift = LONG_LONG_SHIFT; - fmt++; - } - else if (*fmt == 'l') { - shift = LONG_SHIFT; - fmt++; - } - else if (*fmt == 'h') { - shift = SHRT_SHIFT; - fmt++; - if (*fmt == 'h') { - shift = CHAR_SHIFT; - fmt++; - } - } - - /* - * Before each format q points to tmp buffer - * After each format q points past end of item - */ - if ((*fmt | 0x20) == 'x') { - /* With x86 gcc, sizeof(long) == sizeof(int) */ - unsigned long long h; - int ncase; - if (shift > LONG_SHIFT) { - h = va_arg(args, unsigned long long); - } - else if (shift > INT_SHIFT) { - h = va_arg(args, unsigned long); - } else { - h = va_arg(args, unsigned int); - } - ncase = (*fmt & 0x20); - for ( ; shift >= 0; shift -= 4) - *q++ = "0123456789ABCDEF"[(h >> shift) & 0xF] | ncase; - } - else if (*fmt == 'd') { - char *r; - long i; - if (shift > LONG_SHIFT) { - i = va_arg(args, long long); - } - else if (shift > INT_SHIFT) { - i = va_arg(args, long); - } else { - i = va_arg(args, int); - } - if (i < 0) { - *q++ = '-'; - i = -i; - } - p = q; /* save beginning of digits */ - do { - *q++ = '0' + (i % 10); - i /= 10; - } while (i); - /* reverse digits, stop in middle */ - r = q; /* don't alter q */ - while (--r > p) { - i = *r; - *r = *p; - *p++ = i; - } - } - else if (*fmt == 'c') - *q++ = va_arg(args, int); - else - *q++ = *fmt; - /* now output the saved string */ - for (p = tmp; p < q; ++p) - putchar(*p); - } - } - va_end(args); -} - -/* - * String Functions - * ============================================================================= - */ - - -size_t strnlen(const char *s, size_t max) -{ - size_t len = 0; - while(len < max && *s) { - len++; - s++; - } - return len; -} - -void* memset(void* s, int c, size_t n) -{ - size_t i; - char *ss = (char*)s; - - for (i=0;i<n;i++) ss[i] = c; - return s; -} - -void* memcpy(void *dest, const void *src, size_t len) -{ - size_t i; - unsigned char *d; - const unsigned char *s; - d = dest; - s = src; - - for (i=0; i < len; i++) - d[i] = s[i]; - - return dest; -} - -int memcmp(void *src1, void *src2, size_t len) -{ - unsigned char *s1, *s2; - size_t i; - s1 = src1; - s2 = src2; - for(i = 0; i < len; i++) { - if (*s1 != *s2) { - return *s2 - *s1; - } - } - return 0; - -} - -/* - * Checksum functions - * ============================================================================= - */ - - -static unsigned long checksum_partial(unsigned long sum, - void *addr, unsigned long length) -{ - uint8_t *ptr; - volatile union { - uint8_t byte[2]; - uint16_t word; - } value; - unsigned long i; - /* In the most straight forward way possible, - * compute an ip style checksum. - */ - sum = 0; - ptr = addr; - for(i = 0; i < length; i++) { - unsigned long value; - value = ptr[i]; - if (i & 1) { - value <<= 8; - } - /* Add the new value */ - sum += value; - /* Wrap around the carry */ - if (sum > 0xFFFF) { - sum = (sum + (sum >> 16)) & 0xFFFF; - } - } - value.byte[0] = sum & 0xff; - value.byte[1] = (sum >> 8) & 0xff; - return value.word & 0xFFFF; - -} - -static unsigned long checksum_final(unsigned long partial) -{ - return (~partial) & 0xFFFF; -} - -static unsigned long compute_checksum(void *vaddr, unsigned long length) -{ - return checksum_final(checksum_partial(0, vaddr, length)); -} - -/* - * Helper functions - * ============================================================================= - */ - - -void append_command_line(struct parameters *real_mode, char *arg, int arg_bytes) -{ - int len, max; - char *dest; - /* skip over what has already been set */ - len = strnlen(real_mode->command_line, sizeof(real_mode->command_line)); - dest = real_mode->command_line + len; - max = sizeof(real_mode->command_line) - 1; - if (max < 1) { - /* No room to append anything :( */ - return; - } - /* Add a space in between strings */ - *dest++ = ' '; - /* Append the added command line */ - max = sizeof(real_mode->command_line) - 1; - if (max > arg_bytes) { - max = arg_bytes; - } - len = strnlen(arg, max); - memcpy(dest, arg, len); - dest += len; - /* Null terminate the string */ - *dest++ = '\0'; -} - -static void set_memsize_k(struct parameters *real_mode, unsigned long mem_k) -{ - /* ALT_MEM_K maxes out at 4GB */ - if (mem_k > 0x3fffff) { - mem_k = 0x3fffff; - } - if (mem_k > (real_mode->alt_mem_k + (1 << 10))) { - /* Use our memory size less 1M */ - real_mode->alt_mem_k = mem_k - (1 << 10); - real_mode->ext_mem_k = mem_k - (1 << 10); - if ((mem_k - (1 << 10)) > 0xFFFF) { - real_mode->ext_mem_k = 0xFC00; /* 64 M */ - } - } -} - -static void add_e820_map(struct parameters *real_mode, - unsigned long long addr, unsigned long long size, - unsigned long type) -{ - unsigned long long high; - unsigned long mem_k; - int i; - i = real_mode->e820_map_nr; - if (i < E820MAX) { - real_mode->e820_map[i].addr = addr; - real_mode->e820_map[i].size = size; - real_mode->e820_map[i].type = type; - real_mode->e820_map_nr++; - } - /* policy I assume that for the legacy memory - * variables memory is contiguous. - */ - if (type == E820_RAM) { - high = addr + size; - if (high >= 0x40000000000ULL) { - mem_k = 0xFFFFFFFF; - } else { - mem_k = high >> 10; - } - set_memsize_k(real_mode, mem_k); - } -} - -/* - * Multiboot - * ============================================================================= - */ - -#define MULTI_MEM_DEBUG 0 -#if MULTI_MEM_DEBUG -#define multi_puts(x) printf("%s", x) -#define multi_put_hex(x) printf("%x", x) -#define multi_put_lhex(x) printf("%Lx", x) -#else -#define multi_puts(x) -#define multi_put_hex(x) -#define multi_put_lhex(x) -#endif /* MULTI_MEM_DEBUG */ - -/* Multiboot Specification */ -struct multiboot_mods { - unsigned mod_start; - unsigned mod_end; - unsigned char *string; - unsigned reserved; -}; - -struct memory_segment { - unsigned long long addr; - unsigned long long size; - unsigned type; -}; - -struct multiboot_info { - unsigned flags; -#define MULTIBOOT_MEM_VALID 0x01 -#define MULTIBOOT_BOOT_DEV_VALID 0x02 -#define MULTIBOOT_CMDLINE_VALID 0x04 -#define MULTIBOOT_MODS_VALID 0x08 -#define MULTIBOOT_AOUT_SYMS_VALID 0x10 -#define MULTIBOOT_ELF_SYMS_VALID 0x20 -#define MULTIBOOT_MMAP_VALID 0x40 - unsigned mem_lower; - unsigned mem_upper; - unsigned char boot_device[4]; - void *command_line; - unsigned mods_count; - struct multiboot_mods *mods_addr; - unsigned syms_num; - unsigned syms_size; - unsigned syms_addr; - unsigned syms_shndx; - unsigned mmap_length; - struct memory_segment *mmap_addr; -}; - -#define MULTIBOOT_MAX_COMMAND_LINE 0xFFFFFFFF - -static void convert_multiboot_memmap( - struct parameters *real_mode, - struct multiboot_info *info) -{ - unsigned size; - unsigned *size_addr; -#define next_seg(seg, size) ((struct memory_segment *)((char *)(seg) + (size))) - struct memory_segment *seg, *end; - - seg = info->mmap_addr; - end = (void *)(((char *)seg) + info->mmap_length); - size_addr = (unsigned *)(((char *)seg) - 4); - size = *size_addr; - multi_puts("mmap_addr: "); multi_put_hex((unsigned)info->mmap_addr); multi_puts("\n"); - multi_puts("mmap_length: "); multi_put_hex(info->mmap_length); multi_puts("\n"); - multi_puts("size_addr: "); multi_put_hex((unsigned)size_addr); multi_puts("\n"); - multi_puts("size: "); multi_put_hex(size); multi_puts("\n"); - multi_puts("end: "); multi_put_hex((unsigned)end); multi_puts("\n"); - for(seg = info->mmap_addr; (seg < end); seg = next_seg(seg,size)) { - multi_puts("multi-mem: "); - multi_put_lhex(seg->size); - multi_puts(" @ "); - multi_put_lhex(seg->addr); - multi_puts(" ("); - switch(seg->type) { - case E820_RAM: - multi_puts("ram"); - break; - case E820_ACPI: - multi_puts("ACPI data"); - break; - case E820_NVS: - multi_puts("ACPI NVS"); - break; - case E820_RESERVED: - default: - multi_puts("reserved"); - break; - } - multi_puts(")\n"); - add_e820_map(real_mode, seg->addr, seg->size, seg->type); - } -#undef next_seg -} - -static void convert_multiboot( - struct param_info *info, struct multiboot_info *mb_info) -{ - if (info->need_mem_sizes && (mb_info->flags & MULTIBOOT_MEM_VALID)) { - /* info->memory is short 1M */ - set_memsize_k(info->real_mode, mb_info->mem_upper + (1 << 10)); - } - if (mb_info->flags & MULTIBOOT_CMDLINE_VALID) { - append_command_line(info->real_mode, mb_info->command_line, - MULTIBOOT_MAX_COMMAND_LINE); - } - if (info->need_mem_sizes && (mb_info->flags & MULTIBOOT_MMAP_VALID)) { - convert_multiboot_memmap(info->real_mode, mb_info); - } - if (mb_info->flags & (MULTIBOOT_MEM_VALID | MULTIBOOT_MMAP_VALID)) { - info->need_mem_sizes = 0; - } -} - - -/* - * Uniform Boot Environment - * ============================================================================= - */ - -#define UBE_MEM_DEBUG 0 -#if UBE_MEM_DEBUG -#define ube_puts(x) printf("%s", x) -#define ube_put_hex(x) printf("%x", x) -#define ube_put_lhex(x) printf("%Lx", x) -#else -#define ube_puts(x) -#define ube_put_hex(x) -#define ube_put_lhex(x) -#endif /* UBE_MEM_DEBUG */ -static void convert_uniform_boot_memory( - struct parameters *real_mode, struct ube_memory *mem) -{ - int i; - int entries; - unsigned long mem_k; - mem_k = 0; - entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]); - for(i = 0; (i < entries) && (i < E820MAX); i++) { - unsigned long type; - ube_puts("ube-mem: "); - ube_put_lhex(mem->map[i].size); - ube_puts(" @ "); - ube_put_lhex(mem->map[i].start); - ube_puts(" ("); - switch(mem->map[i].type) { - case UBE_MEM_RAM: - type = E820_RAM; - ube_puts("ram"); - break; - case UBE_MEM_ACPI: - type = E820_ACPI; - ube_puts("ACPI data"); - break; - case UBE_MEM_NVS: - type = E820_NVS; - ube_puts("ACPI NVS"); - break; - case UBE_MEM_RESERVED: - default: - type = E820_RESERVED; - ube_puts("reserved"); - break; - } - ube_puts(")\n"); - add_e820_map(real_mode, - mem->map[i].start, mem->map[i].size, type); - } -} - -static void convert_uniform_boot(struct param_info *info, - struct uniform_boot_header *header) -{ - /* Uniform boot environment */ - unsigned long env_bytes; - char *env; - if (header->arg_bytes) { - append_command_line(info->real_mode, (void *)(header->arg), header->arg_bytes); - } - env = (void *)(header->env); - env_bytes = header->env_bytes; - while(env_bytes) { - struct ube_record *record; - record = (void *)env; - if (record->tag == UBE_TAG_MEMORY) { - if (info->need_mem_sizes) { - convert_uniform_boot_memory(info->real_mode, (void *)record); - info->need_mem_sizes = 0; - } - } - env += record->size; - env_bytes -= record->size; - } -} - - - - -/* - * Hardware - * ============================================================================= - */ - -/* we're getting screwed again and again by this problem of the 8259. - * so we're going to leave this lying around for inclusion into - * crt0.S on an as-needed basis. - * well, that went ok, I hope. Now we have to reprogram the interrupts :-( - * we put them right after the intel-reserved hardware interrupts, at - * int 0x20-0x2F. There they won't mess up anything. Sadly IBM really - * messed this up with the original PC, and they haven't been able to - * rectify it afterwards. Thus the bios puts interrupts at 0x08-0x0f, - * which is used for the internal hardware interrupts as well. We just - * have to reprogram the 8259's, and it isn't fun. - */ - -static void setup_i8259(void) -{ - outb(0x11, 0x20); /*! initialization sequence to 8259A-1*/ - outb(0x11, 0xA0); /*! and to 8259A-2*/ - - outb(0x20, 0x21); /*! start of hardware int's (0x20)*/ - outb(0x28, 0xA1); /*! start of hardware int's 2 (0x28)*/ - - outb(0x04, 0x21); /*! 8259-1 is master*/ - outb(0x02, 0xA1); /*! 8259-2 is slave*/ - - outb(0x01, 0x21); /*! 8086 mode for both*/ - outb(0x01, 0xA1); - - outb(0xFF, 0xA1); /*! mask off all interrupts for now*/ - outb(0xFB, 0x21); /*! mask all irq's but irq2 which is cascaded*/ -} - -static void hardware_setup(struct param_info *info __unused) -{ - /* Disable nmi */ - outb(0x80, 0x70); - - /* Make sure any coprocessor is properly reset.. */ - outb(0, 0xf0); - outb(0, 0xf1); - - setup_i8259(); -} - - -/* - * ELF Boot loader - * ============================================================================= - */ - -static int count_elf_notes(Elf_Bhdr *bhdr) -{ - unsigned char *note, *end; - int count; - count = 0; - note = ((char *)bhdr) + sizeof(*bhdr); - end = ((char *)bhdr) + bhdr->b_size; -#if 0 - printf("count_elf_notes %lx\n", (unsigned long)bhdr); -#endif - while (note < end) { - Elf_Nhdr *hdr; - unsigned char *n_name, *n_desc, *next; - hdr = (Elf_Nhdr *)note; - n_name = note + sizeof(*hdr); - n_desc = n_name + ((hdr->n_namesz + 3) & ~3); - next = n_desc + ((hdr->n_descsz + 3) & ~3); -#if 0 - printf("elf_note = %lx\n", (unsigned long)note); - printf("elf_namesz = %x\n", hdr->n_namesz); - printf("elf_descsz = %x\n", hdr->n_descsz); - printf("elf_type = %x\n", hdr->n_type); - printf("elf_name = %lx\n", (unsigned long)n_name); - printf("elf_desc = %lx\n", (unsigned long)n_desc); -#endif - if (next > end) - break; - count++; - note = next; - } - return count; -} - -static Elf_Nhdr *find_elf_note(Elf_Bhdr *bhdr, - Elf_Word namesz, unsigned char *name, Elf_Word type) -{ - unsigned char *note, *end; - note = ((char *)bhdr) + sizeof(*bhdr); - end = ((char *)bhdr) + bhdr->b_size; - while(note < end) { - Elf_Nhdr *hdr; - unsigned char *n_name, *n_desc, *next; - hdr = (Elf_Nhdr *)note; - n_name = note + sizeof(*hdr); - n_desc = n_name + ((hdr->n_namesz + 3) & ~3); - next = n_desc + ((hdr->n_descsz + 3) & ~3); - if (next > end) - break; - if ((hdr->n_type == type) && - (hdr->n_namesz == namesz) && - (memcmp(n_name, name, namesz) == 0)) { - return hdr; - } - note = next; - } - return 0; -} - -static void convert_elf_command_line(struct param_info *info, - Elf_Word descsz, unsigned char *desc) -{ - append_command_line(info->real_mode, desc, descsz); -} - -struct { - Elf_Word namesz; - unsigned char *name; - Elf_Word type; - void (*convert)(struct param_info *info, Elf_Word descsz, unsigned char *desc); -} elf_notes[] = -{ - { 0, "", EBN_COMMAND_LINE, convert_elf_command_line }, -}; - -static void convert_elf_boot(struct param_info *info, Elf_Bhdr *bhdr) -{ - unsigned char *note, *end; - note = ((char *)bhdr) + sizeof(*bhdr); - end = ((char *)bhdr) + bhdr->b_size; - while(note < end) { - Elf_Nhdr *hdr; - unsigned char *n_name, *n_desc, *next; - size_t i; - hdr = (Elf_Nhdr *)note; - n_name = note + sizeof(*hdr); - n_desc = n_name + ((hdr->n_namesz + 3) & ~3); - next = n_desc + ((hdr->n_descsz + 3) & ~3); - if (next > end) - break; - for(i = 0; i < sizeof(elf_notes)/sizeof(elf_notes[0]); i++) { - if ((hdr->n_type == elf_notes[i].type) && - (hdr->n_namesz == elf_notes[i].namesz) && - (memcmp(n_name, elf_notes[i].name, elf_notes[i].namesz) == 0)) { - elf_notes[i].convert(info, hdr->n_descsz, n_desc); - break; - } - } - note = next; - } -} - -/* - * LinuxBIOS - * ============================================================================= - */ - -#define LB_MEM_DEBUG 0 -#if LB_MEM_DEBUG -#define lb_puts(x) printf("%s", x) -#define lb_put_hex(x) printf("%x", x) -#define lb_put_lhex(x) printf("%Lx", x) -#else -#define lb_puts(x) -#define lb_put_hex(x) -#define lb_put_lhex(x) -#endif /* LB_MEM_DEBUG */ - -static unsigned count_lb_records(void *start, unsigned long length) -{ - struct lb_record *rec; - void *end; - unsigned count; - count = 0; - end = ((char *)start) + length; - for(rec = start; ((void *)rec < end) && - (rec->size <= (unsigned long)(end - (void *)rec)); - rec = (void *)(((char *)rec) + rec->size)) { - count++; - } - return count; -} - -static struct lb_header *__find_lb_table(void *start, void *end) -{ - unsigned char *ptr; - /* For now be stupid.... */ - for(ptr = start; (void *)ptr < end; ptr += 16) { - struct lb_header *head = (void *)ptr; - if ((head->signature[0] == 'L') && - (head->signature[1] == 'B') && - (head->signature[2] == 'I') && - (head->signature[3] == 'O') && - (head->header_bytes == sizeof(*head)) && - (compute_checksum(head, sizeof(*head)) == 0) && - (compute_checksum(ptr + sizeof(*head), head->table_bytes) == - head->table_checksum) && - (count_lb_records(ptr + sizeof(*head), head->table_bytes) == - head->table_entries) - ) { - return head; - } - }; - return 0; -} - -static int find_lb_table(struct param_info *info) -{ - struct lb_header *head; - head = 0; - if (!head) { - /* First try at address 0 */ - head = __find_lb_table((void *)0x00000, (void *)0x1000); - } - if (!head) { - /* Then try at address 0xf0000 */ - head = __find_lb_table((void *)0xf0000, (void *)0x100000); - } - if (head) { - struct lb_forward *forward = (struct lb_forward *)(((char *)head) + head->header_bytes); - if (forward->tag == LB_TAG_FORWARD) { - head = __find_lb_table(forward->forward, - forward->forward + 0x1000); - } - } - if (head) { - info->has_linuxbios = 1; - info->lb_table = head; - return 1; - } - return 0; -} - -static void convert_lb_memory(struct param_info *info, struct lb_memory *mem) -{ - int i; - int entries; - entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]); - for(i = 0; (i < entries) && (i < E820MAX); i++) { - unsigned long type; - unsigned long long end; - end = mem->map[i].start + mem->map[i].size; - lb_puts("lb-mem: "); - lb_put_lhex(mem->map[i].start); - lb_puts(" - "); - lb_put_lhex(end); - lb_puts(" ("); - switch(mem->map[i].type) { - case LB_MEM_RAM: - type = E820_RAM; - lb_puts("ram"); - break; - default: - type = E820_RESERVED; - lb_puts("reserved"); - break; - } - lb_puts(")\n"); - add_e820_map(info->real_mode, - mem->map[i].start, mem->map[i].size, type); - } - info->need_mem_sizes = 0; -} - -static void query_lb_values(struct param_info *info) -{ - struct lb_header *head; - struct lb_record *rec; - void *start, *end; - head = info->lb_table; - start = ((unsigned char *)head) + sizeof(*head); - end = ((char *)start) + head->table_bytes; - for(rec = start; ((void *)rec < end) && - (rec->size <= (unsigned long)(end - (void *)rec)); - rec = (void *)(((char *)rec) + rec->size)) { - switch(rec->tag) { - case LB_TAG_MEMORY: - { - struct lb_memory *mem; - mem = (struct lb_memory *) rec; - convert_lb_memory(info, mem); - break; - } - default: - break; - }; - } -} - -/* - * PCBIOS - * ============================================================================= - */ -#define PC_MEM_DEBUG 0 -#if PC_MEM_DEBUG -#define pc_puts(x) printf("%s", x) -#define pc_put_hex(x) printf("%x", x) -#define pc_put_lhex(x) printf("%Lx", x) -#else -#define pc_puts(x) -#define pc_put_hex(x) -#define pc_put_lhex(x) -#endif /* PC_MEM_DEBUG */ - -/* functions for querying the pcbios */ -extern void noop(void); /* for testing purposes only */ -extern int meme820(struct e820entry *buf, int count); -extern unsigned int meme801(void); -extern unsigned short mem88(void); -extern unsigned short basememsize(void); - -struct meminfo { - int map_count; - struct e820entry map[E820MAX]; -}; - -static struct meminfo meminfo; -static void get_meminfo(struct param_info *info) -{ - int i; - pc_puts("getting meminfo...\n"); - meminfo.map_count = meme820(meminfo.map, E820MAX); - pc_puts("got meminfo count="); pc_put_hex(meminfo.map_count); pc_puts("\n"); - for(i = 0; i < meminfo.map_count; i++) { - unsigned long long end; - struct e820entry *seg = meminfo.map + i; - end = seg->addr + seg->size; - pc_puts("BIOS-e820: "); - pc_put_lhex(seg->addr); - pc_puts(" - "); - pc_put_lhex(end); - pc_puts(" ("); - switch(seg->type) { - case E820_RAM: - pc_puts("ram"); - info->need_mem_sizes = 0; - break; - case E820_ACPI: - pc_puts("ACPI data"); - break; - case E820_NVS: - pc_puts("ACPI NVS"); - break; - case E820_RESERVED: - default: - pc_puts("reserved"); - break; - } - pc_puts(")\n"); - add_e820_map(info->real_mode, - seg->addr, seg->size, seg->type); - } - info->real_mode->alt_mem_k = meme801(); - info->real_mode->ext_mem_k = mem88(); - if (info->real_mode->alt_mem_k || info->real_mode->ext_mem_k) { - info->need_mem_sizes = 0; - } -} - -static void query_pcbios_values(struct param_info *info) -{ - get_meminfo(info); -} - -/* - * Bootloaders - * ============================================================================= - */ - - -static void query_bootloader_param_class(struct param_info *info) -{ - int has_bootloader_type = 0; - Elf_Bhdr *hdr = 0; - if (!has_bootloader_type && (info->type == 0x2BADB002)) { - /* Orignal multiboot specification */ - info->has_multiboot = 1; - has_bootloader_type = 1; - } - if (!has_bootloader_type && (info->type == 0x0A11B007)) { - /* Uniform boot proposal */ - unsigned long checksum; - struct uniform_boot_header *header; - header = info->data; - checksum = compute_checksum(header, header->header_bytes); - if (checksum == 0) { - info->has_uniform_boot = 1; - has_bootloader_type = 1; - } else{ - printf("Bad uniform boot header checksum!\n"); - } - } - if (info->type == ELF_BHDR_MAGIC) { - hdr = info->data; - } - if (info->param && (info->param->b_signature == ELF_BHDR_MAGIC)) { - hdr = info->param; - } - if (!has_bootloader_type && hdr) { - /* Good ELF boot proposal... */ - unsigned long checksum; - int count; - checksum = 0; - if (hdr->b_checksum != 0) { - checksum = compute_checksum(hdr, hdr->b_size); - } - count = count_elf_notes(hdr); - if ((hdr->b_signature == ELF_BHDR_MAGIC) && - (checksum == 0) && - hdr->b_records == count) { - info->has_elf_boot = 1; - info->param = hdr; - has_bootloader_type = 1; - } - else { - printf("Bad ELF parameter table!\n"); - printf(" checksum = %x\n", checksum); - printf(" count = %x\n", count); - printf(" hdr = %x\n", (unsigned long)hdr); - printf(" b_size = %x\n", hdr->b_size); - printf("b_signature = %x\n", hdr->b_signature); - printf(" b_records = %x\n", hdr->b_records); - } - } - if (!has_bootloader_type) { - printf("Unknown bootloader class!\n"); - printf("type=%x\n", info->type); - printf("data=%x\n", (unsigned)info->data); - printf("param=%x\n", (unsigned)info->param); - } -} - -static void query_bootloader_values(struct param_info *info) -{ - if (info->has_multiboot) { - convert_multiboot(info, info->data); - } - else if (info->has_uniform_boot) { - convert_uniform_boot(info, info->data); - } - else if (info->has_elf_boot) { - convert_elf_boot(info, info->param); - } -} - -/* - * Firmware - * ============================================================================= - */ - -static int bootloader_query_firmware_class(struct param_info *info) -{ - Elf_Nhdr *hdr; - unsigned char *note, *n_name, *n_desc; - int detected_firmware_type; - if (!info->has_elf_boot) { - /* Only the elf boot tables gives us a firmware type */ - return 0; - } - detected_firmware_type = 0; - n_desc = 0; - - hdr = find_elf_note(info->param, 0, 0, EBN_FIRMWARE_TYPE); - if (!hdr) { - /* If I'm not explicitly told the firmware type - * do my best to guess it for myself. - */ - detected_firmware_type = 0; - } else { - note = (char *)hdr; - n_name = note + sizeof(*hdr); - n_desc = n_name + ((hdr->n_namesz + 3) & ~3); - } - if (!detected_firmware_type && hdr && - (hdr->n_descsz == 7) && - (memcmp(n_desc, "PCBIOS", 7) == 0)) { - info->has_pcbios = 1; - detected_firmware_type = 1; - } - if (!detected_firmware_type && hdr && - (hdr->n_descsz == 10) && - (memcmp(n_desc, "LinuxBIOS", 10) == 0)) { - /* Don't believe I'm linuxBIOS unless I can - * find the linuxBIOS table.. - */ - detected_firmware_type = find_lb_table(info); - } - if (!detected_firmware_type && hdr && - (hdr->n_descsz == 0)) { - /* No firmware is present */ - detected_firmware_type = 1; - } - if (!detected_firmware_type && hdr && - (hdr->n_descsz == 1) && - (memcmp(n_desc, "", 1) == 0)) { - /* No firmware is present */ - detected_firmware_type = 1; - } - if (!detected_firmware_type && hdr) { - printf("Unknown firmware type: %s\n", n_desc); - } - return detected_firmware_type; -} - -static void query_firmware_class(struct param_info *info) -{ - int detected_firmware_type = 0; - - /* First say I have no firmware at all... */ - info->has_pcbios = 0; - info->has_linuxbios = 0; - - /* See if the bootloader has told us what - * kind of firmware we are running on. - */ - detected_firmware_type = bootloader_query_firmware_class(info); - - /* See if we can detect linuxbios. */ - if (!detected_firmware_type) { - detected_firmware_type = find_lb_table(info); - } - - if (!detected_firmware_type) { - /* if all else fails assume a standard pcbios... */ - info->has_pcbios = 1; - } - - /* Now print out the firmware type... */ - printf("Firmware type:"); - if (info->has_linuxbios) { - printf(" LinuxBIOS"); - } - if (info->has_pcbios) { - printf(" PCBIOS"); - } - printf("\n"); -} - -static void query_firmware_values(struct param_info *info) -{ - if (info->has_linuxbios) { - query_lb_values(info); - } - if (info->has_pcbios) { - query_pcbios_values(info); - } - -} - -/* - * Debug - * ============================================================================= - */ - -#if 0 -static void print_offsets(void) -{ - struct parameters *real_mode = 0; - printf("print_offsets\n"); - - printf("orig_x =%x\n", (uint32_t)&real_mode->orig_x); - printf("orig_y =%x\n", (uint32_t)&real_mode->orig_y); - printf("ext_mem_k =%x\n", (uint32_t)&real_mode->ext_mem_k); - printf("orig_video_page =%x\n", (uint32_t)&real_mode->orig_video_page); - printf("orig_video_mode =%x\n", (uint32_t)&real_mode->orig_video_mode); - printf("orig_video_cols =%x\n", (uint32_t)&real_mode->orig_video_cols); - printf("unused2 =%x\n", (uint32_t)&real_mode->unused2); - printf("orig_video_ega_bx =%x\n", (uint32_t)&real_mode->orig_video_ega_bx); - printf("unused3 =%x\n", (uint32_t)&real_mode->unused3); - printf("orig_video_lines =%x\n", (uint32_t)&real_mode->orig_video_lines); - printf("orig_video_isVGA =%x\n", (uint32_t)&real_mode->orig_video_isVGA); - printf("orig_video_points =%x\n", (uint32_t)&real_mode->orig_video_points); - printf("lfb_width =%x\n", (uint32_t)&real_mode->lfb_width); - printf("lfb_height =%x\n", (uint32_t)&real_mode->lfb_height); - printf("lfb_depth =%x\n", (uint32_t)&real_mode->lfb_depth); - printf("lfb_base =%x\n", (uint32_t)&real_mode->lfb_base); - printf("lfb_size =%x\n", (uint32_t)&real_mode->lfb_size); - printf("cl_magic =%x\n", (uint32_t)&real_mode->cl_magic); - printf("cl_offset =%x\n", (uint32_t)&real_mode->cl_offset); - printf("lfb_linelength =%x\n", (uint32_t)&real_mode->lfb_linelength); - printf("red_size =%x\n", (uint32_t)&real_mode->red_size); - printf("red_pos =%x\n", (uint32_t)&real_mode->red_pos); - printf("green_size =%x\n", (uint32_t)&real_mode->green_size); - printf("green_pos =%x\n", (uint32_t)&real_mode->green_pos); - printf("blue_size =%x\n", (uint32_t)&real_mode->blue_size); - printf("blue_pos =%x\n", (uint32_t)&real_mode->blue_pos); - printf("rsvd_size =%x\n", (uint32_t)&real_mode->rsvd_size); - printf("rsvd_pos =%x\n", (uint32_t)&real_mode->rsvd_pos); - printf("vesapm_seg =%x\n", (uint32_t)&real_mode->vesapm_seg); - printf("vesapm_off =%x\n", (uint32_t)&real_mode->vesapm_off); - printf("pages =%x\n", (uint32_t)&real_mode->pages); - printf("reserved4 =%x\n", (uint32_t)&real_mode->reserved4); - printf("apm_bios_info =%x\n", (uint32_t)&real_mode->apm_bios_info); - printf("drive_info =%x\n", (uint32_t)&real_mode->drive_info); - printf("sys_desc_table =%x\n", (uint32_t)&real_mode->sys_desc_table); - printf("alt_mem_k =%x\n", (uint32_t)&real_mode->alt_mem_k); - printf("reserved5 =%x\n", (uint32_t)&real_mode->reserved5); - printf("e820_map_nr =%x\n", (uint32_t)&real_mode->e820_map_nr); - printf("reserved6 =%x\n", (uint32_t)&real_mode->reserved6); - printf("mount_root_rdonly =%x\n", (uint32_t)&real_mode->mount_root_rdonly); - printf("reserved7 =%x\n", (uint32_t)&real_mode->reserved7); - printf("ramdisk_flags =%x\n", (uint32_t)&real_mode->ramdisk_flags); - printf("reserved8 =%x\n", (uint32_t)&real_mode->reserved8); - printf("orig_root_dev =%x\n", (uint32_t)&real_mode->orig_root_dev); - printf("reserved9 =%x\n", (uint32_t)&real_mode->reserved9); - printf("aux_device_info =%x\n", (uint32_t)&real_mode->aux_device_info); - printf("reserved10 =%x\n", (uint32_t)&real_mode->reserved10); - printf("param_block_signature=%x\n", (uint32_t)&real_mode->param_block_signature); - printf("param_block_version =%x\n", (uint32_t)&real_mode->param_block_version); - printf("reserved11 =%x\n", (uint32_t)&real_mode->reserved11); - printf("loader_type =%x\n", (uint32_t)&real_mode->loader_type); - printf("loader_flags =%x\n", (uint32_t)&real_mode->loader_flags); - printf("reserved12 =%x\n", (uint32_t)&real_mode->reserved12); - printf("kernel_start =%x\n", (uint32_t)&real_mode->kernel_start); - printf("initrd_start =%x\n", (uint32_t)&real_mode->initrd_start); - printf("initrd_size =%x\n", (uint32_t)&real_mode->initrd_size); - printf("reserved13 =%x\n", (uint32_t)&real_mode->reserved13); - printf("e820_map =%x\n", (uint32_t)&real_mode->e820_map); - printf("reserved16 =%x\n", (uint32_t)&real_mode->reserved16); - printf("command_line =%x\n", (uint32_t)&real_mode->command_line); - printf("reserved17 =%x\n", (uint32_t)&real_mode->reserved17); -} - -static void print_linux_params(struct param_info *info) -{ - int i; - - printf("print_linux_params\n"); - /* Default screen size */ - printf("orig_x =%x\n", info->real_mode->orig_x); - printf("orig_y =%x\n", info->real_mode->orig_y); - printf("orig_video_page =%x\n", info->real_mode->orig_video_page); - printf("orig_video_mode =%x\n", info->real_mode->orig_video_mode); - printf("orig_video_cols =%x\n", info->real_mode->orig_video_cols); - printf("orig_video_lines =%x\n", info->real_mode->orig_video_lines); - printf("orig_video_ega_bx=%x\n", info->real_mode->orig_video_ega_bx); - printf("orig_video_isVGA =%x\n", info->real_mode->orig_video_isVGA); - printf("orig_video_points=%x\n", info->real_mode->orig_video_points); - - - /* System descriptor table... */ - printf("sys_dest_table_len=%x\n", info->real_mode->sys_desc_table.length); - - /* Memory sizes */ - printf("ext_mem_k =%x\n", info->real_mode->ext_mem_k); - printf("alt_mem_k =%x\n", info->real_mode->alt_mem_k); - printf("e820_map_nr =%x\n", info->real_mode->e820_map_nr); - for(i = 0; i < E820MAX; i++) { - printf("addr[%x] =%Lx\n", - i, info->real_mode->e820_map[i].addr); - printf("size[%x] =%Lx\n", - i, info->real_mode->e820_map[i].size); - printf("type[%x] =%Lx\n", - i, info->real_mode->e820_map[i].type); - } - printf("mount_root_rdonly=%x\n", info->real_mode->mount_root_rdonly); - printf("ramdisk_flags =%x\n", info->real_mode->ramdisk_flags); - printf("orig_root_dev =%x\n", info->real_mode->orig_root_dev); - printf("aux_device_info =%x\n", info->real_mode->aux_device_info); - printf("param_block_signature=%x\n", *((uint32_t *)info->real_mode->param_block_signature)); - printf("loader_type =%x\n", info->real_mode->loader_type); - printf("loader_flags =%x\n", info->real_mode->loader_flags); - printf("initrd_start =%x\n", info->real_mode->initrd_start); - printf("initrd_size =%x\n", info->real_mode->initrd_size); - - /* Where I'm putting the command line */ - printf("cl_magic =%x\n", info->real_mode->cl_magic); - printf("cl_offset =%x\n", info->real_mode->cl_offset); - - /* Now print the command line */ - printf("command_line =%s\n", info->real_mode->command_line); -} - - -#endif - -/* - * main - * ============================================================================= - */ - -void initialize_linux_params(struct param_info *info) -{ - int len; - /* First the defaults */ - memset(info->real_mode, 0, PAGE_SIZE); - - /* Default screen size */ - info->real_mode->orig_x = 0; - info->real_mode->orig_y = 25; - info->real_mode->orig_video_page = 0; - info->real_mode->orig_video_mode = 0; - info->real_mode->orig_video_cols = 80; - info->real_mode->orig_video_lines = 25; - info->real_mode->orig_video_ega_bx = 0; - info->real_mode->orig_video_isVGA = 1; - info->real_mode->orig_video_points = 16; - - /* Fill this in later */ - info->real_mode->ext_mem_k = 0; - - /* Fill in later... */ - info->real_mode->e820_map_nr = 0; - - /* Where I'm putting the command line */ - info->real_mode->cl_magic = CL_MAGIC_VALUE; - info->real_mode->cl_offset = 2048; - - info->real_mode->cmd_line_ptr = info->real_mode->cl_offset + (unsigned long) info->real_mode; - - /* Now set the command line */ - len = strnlen(info->image->cmdline, sizeof(info->real_mode->command_line) -1); - memcpy(info->real_mode->command_line, info->image->cmdline, len); - info->real_mode->command_line[len] = '\0'; - - /* from the bios initially */ - memset(&info->real_mode->apm_bios_info, 0, sizeof(info->real_mode->apm_bios_info)); - - memset(&info->real_mode->drive_info, 0, sizeof(info->real_mode->drive_info)); - - /* forget it for now... */ - info->real_mode->sys_desc_table.length = 0; - - /* Fill this in later */ - info->real_mode->alt_mem_k = 0; - info->real_mode->ext_mem_k = 0; - - /* default yes: this can be overridden on the command line */ - info->real_mode->mount_root_rdonly = 0xFFFF; - - /* old ramdisk options, These really should be command line - * things... - */ - info->real_mode->ramdisk_flags = info->image->ramdisk_flags; - - /* default to /dev/hda. - * Override this on the command line if necessary - */ - info->real_mode->orig_root_dev = info->image->root_dev; - - /* Originally from the bios? */ - info->real_mode->aux_device_info = 0; - - /* Boot block magic */ - memcpy(info->real_mode->param_block_signature, "HdrS", 4); - info->real_mode->param_block_version = 0x0201; - - /* Say I'm a kernel boot loader */ - info->real_mode->loader_type = (LOADER_TYPE_KERNEL << 4) + 0 /* version */; - - /* No loader flags */ - info->real_mode->loader_flags = 0; - - /* Set it to 16M, instead of 0 which means 4G */ - info->real_mode->kernel_alignment = 16*1024*1024; - - /* Ramdisk address and size ... */ - info->real_mode->initrd_start = 0; - info->real_mode->initrd_size = 0; - if (info->image->initrd_size) { - info->real_mode->initrd_start = info->image->initrd_start; - info->real_mode->initrd_size = info->image->initrd_size; - } - - /* Now remember those things that I need */ - info->need_mem_sizes = 1; -} - -void *convert_params(unsigned type, void *data, void *param, void *image) -{ - struct param_info info; -#if 0 - printf("hello world\n"); -#endif - info.real_mode = faked_real_mode; - info.type = type; - info.data = data; - info.param = param; - info.image = image; - initialize_linux_params(&info); - query_bootloader_param_class(&info); - query_firmware_class(&info); - query_firmware_values(&info); - query_bootloader_values(&info); - - /* Do the hardware setup that linux might forget... */ - hardware_setup(&info); - - /* Print some debugging information */ -#if 0 - printf("EXT_MEM_K=%x\n", info.real_mode->ext_mem_k); - printf("ALT_MEM_K=%x\n", info.real_mode->alt_mem_k); -#endif -#if 0 - print_offsets(); - print_linux_params(&info); -#endif -#if 0 - printf("info.real_mode = 0x%x\n", info.real_mode ); - printf("Jumping to Linux\n"); -#endif - return info.real_mode; -} - diff --git a/util/mkelfImage/linux-i386/head.S b/util/mkelfImage/linux-i386/head.S deleted file mode 100644 index 9c52896e0c..0000000000 --- a/util/mkelfImage/linux-i386/head.S +++ /dev/null @@ -1,581 +0,0 @@ -/* - * exec_kernel/user_space/head.S - * - * Copyright (C) 2000, 2002, 2003 Eric Biederman - * - * Parts of this code were take from the linux startup - * code of linux-2.4.0-test9 - * - * Other parts were taken from etherboot-5.0.5 - */ - -#define ASSEMBLY 1 - -#define RELOC 0x10000 -#define PROT_CODE_SEG 0x10 -#define PROT_DATA_SEG 0x18 -#define REAL_CODE_SEG 0x08 -#define REAL_DATA_SEG 0x20 - - .equ CR0_PE,1 - -.text -.code32 - - -#include "convert.h" - - .globl startup_32 -startup_32: - cld - cli - - # Save the arguments safely out of the way - movl %eax, boot_type - movl %ebx, boot_data - cmp $0,%esp - jz 1f - movl 4(%esp), %eax - movl %eax, boot_param -1: - - movl stack_start, %esp - - # Clear eflags - pushl $0 - popfl - - # Clear BSS - xorl %eax,%eax - movl $ _edata,%edi - movl $ _end,%ecx - subl %edi,%ecx - cld - rep - stosb - - # Move the gdt where Linux will not smash it during decompression - movl $gdt, %esi - movl $GDTLOC, %edi - movl $(gdt_end - gdt), %ecx - rep movsb - - # Linux makes stupid assumptions about the segments - # that are already setup, so setup a new gdt & ldt - # and then reload the segment registers. - - lgdt gdt_48 - lidt idt_48 - - # Load the data segment registers - movl $ PROT_DATA_SEG, %eax - movl %eax, %ds - movl %eax, %es - movl %eax, %fs - movl %eax, %gs - movl %eax, %ss - - pushl $image_params # image build time parameters as forth arg - pushl boot_param # boot_param pointer as third arg - pushl boot_data # boot data pointer as second arg - pushl boot_type # boot data type as first argument - call convert_params - - movl %eax, %esi # put the real mode pointer in a safe place - addl $16, %esp # pop the arguments - - - # Setup the registers before jumping to linux - - - # clear eflags - pushl $0 - popfl - - # Flag to indicate we are the bootstrap processor - xorl %ebx, %ebx - - movl switch_64, %eax - cmp $1, %eax - jz switch_to_64 - - # Clear the unspecified registers for good measure - xorl %eax, %eax - xorl %ecx, %ecx - xorl %edx, %edx - xorl %edi, %edi - xorl %ebp, %ebp - - # do not clear esp, we still need to use lret later - - pushl $PROT_CODE_SEG - movl entry, %eax - pushl %eax - - lret - -switch_to_64: - - /* We need to switch to 64bit before use startup_64 entry go to kernel */ - /* - * Prepare for entering 64 bit mode - */ - # Move the gdt64 where Linux will not smash it during decompression - movl %esi, %eax # save the real mode pointer - movl $gdt64, %esi - movl $GDT64LOC, %edi - movl $(gdt64_end - gdt64), %ecx - rep movsb - movl %eax, %esi - - /* Load new GDT with the 64bit segments using 32bit descriptor */ - lgdt gdt64 - - /* Enable PAE mode */ - xorl %eax, %eax - btsl $5, %eax - movl %eax, %cr4 - - /* - * Build early 4G boot pagetable - */ - /* Initialize Page tables to 0*/ - movl $PGTLOC, %edi - xorl %eax, %eax - movl $((4096*6)/4), %ecx - rep stosl - - /* Build Level 4 */ - movl $(PGTLOC + 0), %edi - leal 0x1007 (%edi), %eax - movl %eax, 0(%edi) - - /* Build Level 3 */ - movl $(PGTLOC + 0x1000), %edi - leal 0x1007(%edi), %eax - movl $4, %ecx -1: movl %eax, 0x00(%edi) - addl $0x00001000, %eax - addl $8, %edi - decl %ecx - jnz 1b - - /* Build Level 2 */ - movl $(PGTLOC + 0x2000), %edi - movl $0x00000183, %eax - movl $2048, %ecx -1: movl %eax, 0(%edi) - addl $0x00200000, %eax - addl $8, %edi - decl %ecx - jnz 1b - - /* Enable the boot page tables */ - movl $PGTLOC, %eax - movl %eax, %cr3 - - /* Enable Long mode in EFER (Extended Feature Enable Register) */ - movl $0xc0000080, %ecx - rdmsr - btsl $8, %eax - wrmsr - - /* Preparing for 64bit jmp */ - pushl $PROT_CODE_SEG - movl entry, %eax - pushl %eax - - /* Enter paged protected Mode, activating Long Mode */ - xorl %eax, %eax - btsl $31, %eax - btsl $0, %eax - movl %eax, %cr0 - - /* - * At this point we're in long mode but in 32bit compatibility mode - * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn - * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use - * the new gdt/idt that has __KERNEL_CS with CS.L = 1. - */ - - lret - - - /* Routines to query the BIOS... */ -/************************************************************************** -E820_MEMSIZE - Get a listing of memory regions -**************************************************************************/ -#define SMAP 0x534d4150 - .globl meme820 -meme820: - pushl %ebp - movl %esp, %ebp - pushl %ebx - pushl %esi - pushl %edi - movl 8(%ebp), %edi /* Address to return e820 structures at */ - subl $RELOC, %edi - movl 12(%ebp), %esi /* Maximum number of e820 structurs to return */ - pushl %esi - call _prot_to_real - .code16 - xorl %ebx, %ebx -jmpe820: - movl $0xe820, %eax - movl $SMAP, %edx - movl $20, %ecx - /* %di was setup earlier */ - int $0x15 - jc bail820 - - cmpl $SMAP, %eax - jne bail820 - -good820: - /* If this is useable memory, we save it by simply advancing %di by - * sizeof(e820rec) - */ - decl %esi - testl %esi,%esi - jz bail820 - - addw $20, %di -again820: - cmpl $0, %ebx /* check to see if %ebx is set to EOF */ - jne jmpe820 - -bail820: - data32 call _real_to_prot - .code32 - popl %eax - subl %esi, %eax /* Compute how many structure we read */ - - /* Restore everything else */ - popl %edi - popl %esi - popl %ebx - movl %ebp, %esp - popl %ebp - ret - - -/************************************************************************** -MEME801 - Determine size of extended memory -**************************************************************************/ - .globl meme801 -meme801: - pushl %ebx - pushl %esi - pushl %edi - call _prot_to_real - .code16 - - stc # fix to work around buggy - xorw %cx,%cx # BIOSes which dont clear/set - xorw %dx,%dx # carry on pass/error of - # e801h memory size call - # or merely pass cx,dx though - # without changing them. - movw $0xe801,%ax - int $0x15 - jc e801absent - - cmpw $0x0, %cx # Kludge to handle BIOSes - jne e801usecxdx # which report their extended - cmpw $0x0, %dx # memory in AX/BX rather than - jne e801usecxdx # CX/DX. The spec I have read - movw %ax, %cx # seems to indicate AX/BX - movw %bx, %dx # are more reasonable anyway... - -e801usecxdx: - andl $0xffff, %edx # clear sign extend - shll $6, %edx # and go from 64k to 1k chunks - movl %edx, %eax # store extended memory size - andl $0xffff, %ecx # clear sign extend - addl %ecx, %eax # and add lower memory into - - jmp e801out -e801absent: - xorl %eax,%eax - -e801out: - data32 call _real_to_prot - .code32 - /* Restore Everything */ - popl %edi - popl %esi - popl %ebx - ret - -/************************************************************************** -MEM88 - Determine size of extended memory -**************************************************************************/ - .globl mem88 -mem88: - pushl %ebx - pushl %esi - pushl %edi - call _prot_to_real - .code16 - - movb $0x88, %ah - int $0x15 - andl $0xffff, %eax - - data32 call _real_to_prot - .code32 - - /* Restore Everything */ - popl %edi - popl %esi - popl %ebx - ret - - -/************************************************************************** -BASEMEMSIZE - Get size of the conventional (base) memory -**************************************************************************/ - .globl basememsize -basememsize: - call _prot_to_real - .code16 - int $0x12 - movw %ax,%cx - DATA32 call _real_to_prot - .code32 - movw %cx,%ax - ret - -/************************************************************************** -_REAL_TO_PROT - Go from REAL mode to Protected Mode -**************************************************************************/ - .globl _real_to_prot -_real_to_prot: - .code16 - cli - cs - addr32 lgdt gdt_48 - RELOC - movl %cr0,%eax - orl $CR0_PE,%eax - movl %eax,%cr0 /* turn on protected mode */ - - /* flush prefetch queue, and reload %cs:%eip */ - data32 ljmp $PROT_CODE_SEG,$1f -1: - .code32 - /* reload other segment registers */ - movl $PROT_DATA_SEG,%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%ss - addl $RELOC,%esp /* Fix up stack pointer */ - xorl %eax,%eax - movl %eax,%fs - movl %eax,%gs - popl %eax /* Fix up return address */ - addl $RELOC,%eax - pushl %eax - - /* switch to protected mode idt */ - cs - lidt idt_48 - ret - -/************************************************************************** -_PROT_TO_REAL - Go from Protected Mode to REAL Mode -**************************************************************************/ - .globl _prot_to_real -_prot_to_real: - .code32 - popl %eax - subl $RELOC,%eax /* Adjust return address */ - pushl %eax - subl $RELOC,%esp /* Adjust stack pointer */ - ljmp $REAL_CODE_SEG,$1f- RELOC /* jump to a 16 bit segment */ -1: - .code16 - /* clear the PE bit of CR0 */ - movl %cr0,%eax - andl $0!CR0_PE,%eax - movl %eax,%cr0 - - /* make intersegment jmp to flush the processor pipeline - * and reload %cs:%eip (to clear upper 16 bits of %eip). - */ - data32 ljmp $(RELOC)>>4,$2f- RELOC -2: - /* we are in real mode now - * set up the real mode segment registers : %ds, $ss, %es - */ - movw %cs,%ax - movw %ax,%ds - movw %ax,%es - movw %ax,%ss - movw %ax,%fs - movw %ax,%gs - - /* Switch to the real mode idt */ - cs - addr32 lidt idt_real - RELOC - - sti - data32 ret /* There is a 32 bit return address on the stack */ - .code32 - -boot_type: .long 0 -boot_data: .long 0 -boot_param: .long 0 - -idt_real: - .word 0x400 # idt limit = 256 - .word 0, 0 -idt_48: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L -gdt_48: - .word gdt_end - gdt - 1 # gdt limit=40, - # (5 GDT entries) - .long GDTLOC # gdt base - -# Descriptor tables -# These need to be in a seperate section so I can be -# certain later activities dont stomp them -gdt: - /* 0x00 */ - .word 0, 0, 0, 0 # dummy - - /* 0x08 */ - /* 16 bit real mode code segment */ - .word 0xffff,(RELOC&0xffff) - .byte (RELOC>>16),0x9b,0x00,(RELOC>>24) - - /* 0x10 */ - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9A00 # code read/exec - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - /* 0x18 */ - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9200 # data read/write - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - /* 0x20 */ - /* 16 bit real mode data segment */ - .word 0xffff,(RELOC&0xffff) - .byte (RELOC>>16),0x93,0x00,(RELOC>>24) - - /* For 2.5.x the kernel segments have moved */ - - /* 0x28 dummy */ - .quad 0 - - /* 0x30 dummy */ - .quad 0 - /* 0x38 dummy */ - .quad 0 - /* 0x40 dummy */ - .quad 0 - /* 0x48 dummy */ - .quad 0 - /* 0x50 dummy */ - .quad 0 - /* 0x58 dummy */ - .quad 0 - - - /* 0x60 */ - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9A00 # code read/exec - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - /* 0x68 */ - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9200 # data read/write - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - -/* - * The layout of the per-CPU GDT under Linux: - * - * 0 - null - * 1 - reserved - * 2 - reserved - * 3 - reserved - * - * 4 - default user CS <==== new cacheline - * 5 - default user DS - * - * ------- start of TLS (Thread-Local Storage) segments: - * - * 6 - TLS segment #1 [ glibc's TLS segment ] - * 7 - TLS segment #2 [ Wine's %fs Win32 segment ] - * 8 - TLS segment #3 - * 9 - reserved - * 10 - reserved - * 11 - reserved - * - * ------- start of kernel segments: - * - * 12 - kernel code segment <==== new cacheline - * 13 - kernel data segment - * 14 - TSS - * 15 - LDT - * 16 - PNPBIOS support (16->32 gate) - * 17 - PNPBIOS support - * 18 - PNPBIOS support - * 19 - PNPBIOS support - * 20 - PNPBIOS support - * 21 - APM BIOS support - * 22 - APM BIOS support - * 23 - APM BIOS support - */ -gdt_end: - -gdt64: - .word gdt64_end - gdt64 - .long GDT64LOC - .word 0 - .quad 0x0000000000000000 /* NULL descriptor */ - .quad 0x00af9a000000ffff /* __KERNEL_CS */ - .quad 0x00cf92000000ffff /* __KERNEL_DS */ -gdt64_end: - - .section ".trailer", "a" - /* Constants set at build time, these are at the very end of my image */ - .balign 16 - .global image_params -image_params: - -convert_magic: - .long CONVERT_MAGIC -gdt_size: - .long gdt_end - gdt -gdt64_size: - .long gdt64_end - gdt64 -pgt_size: - .long 4096*6 -bss_size: - .long bss_sizex -ramdisk_flags: - .word 0 -root_dev: - .word DEFAULT_ROOT_DEV -entry: - .long 0 -switch_64: - .long 0 -initrd_start: - .long 0 -initrd_size: - .long 0 -cmdline: - .asciz "BOOT_IMAGE=head.S console=ttyS0 ip=dhcp root=/dev/nfs" - .org cmdline + CMDLINE_MAX, 0 -cmdline_end: diff --git a/util/mkelfImage/linux-i386/mkelf-linux-i386.c b/util/mkelfImage/linux-i386/mkelf-linux-i386.c deleted file mode 100644 index 47256fd2f4..0000000000 --- a/util/mkelfImage/linux-i386/mkelf-linux-i386.c +++ /dev/null @@ -1,466 +0,0 @@ -#include <stdio.h> -#include <errno.h> -#include <stdlib.h> -#include <stdint.h> -#include <string.h> -#define _GNU_SOURCE -#include <getopt.h> -#include "elf.h" -#include "elf_boot.h" -#include "convert.h" -#include "x86-linux.h" -#include "mkelfImage.h" - -static unsigned char payload[] = { -#include "convert.bin.c" -}; - -struct kernel_info; -static void (*parse_kernel_type)(struct kernel_info *info, char *kernel_buf, size_t kernel_size); -static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size); -static void parse_elf32_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size); -static void parse_elf64_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size); - -char *vmlinux_x86_64_probe(char *kernel_buf, off_t kernel_size); - -char *vmlinux_i386_probe(char *kernel_buf, off_t kernel_size) -{ - Elf32_Ehdr *ehdr; - Elf32_Phdr *phdr; - int i; - int phdrs; - ehdr = (Elf32_Ehdr *)kernel_buf; - if ( - (ehdr->e_ident[EI_MAG0] != ELFMAG0) || - (ehdr->e_ident[EI_MAG1] != ELFMAG1) || - (ehdr->e_ident[EI_MAG2] != ELFMAG2) || - (ehdr->e_ident[EI_MAG3] != ELFMAG3)) { - return "No ELF signature found on kernel\n"; - } - if (ehdr->e_ident[EI_CLASS] != ELFCLASS32) { - return vmlinux_x86_64_probe(kernel_buf, kernel_size); -// return "Not a 32bit ELF kernel\n"; - } - if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { - return "Not a little endian ELF kernel\n"; - } - if (le16_to_cpu(ehdr->e_type) != ET_EXEC) { - return "Not an executable kernel\n"; - } - if (le16_to_cpu(ehdr->e_machine) != EM_386) { - return "Not an i386 kernel\n"; - } - if ( (ehdr->e_ident[EI_VERSION] != EV_CURRENT) || - (le32_to_cpu(ehdr->e_version) != EV_CURRENT)) { - return "Kernel not using ELF version 1.\n"; - } - if (le16_to_cpu(ehdr->e_phentsize) != sizeof(*phdr)) { - return "Kernel uses bad program header size.\n"; - } - phdr = (Elf32_Phdr *)(kernel_buf + le32_to_cpu(ehdr->e_phoff)); - phdrs = 0; - for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { - if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) - continue; - phdrs++; - } - if (phdrs == 0) { - return "No PT_LOAD segments!\n"; - } - parse_kernel_type = parse_elf32_kernel; - return 0; -} -char *vmlinux_x86_64_probe(char *kernel_buf, off_t kernel_size) -{ - Elf64_Ehdr *ehdr; - Elf64_Phdr *phdr; - int i; - int phdrs = 0; - ehdr = (Elf64_Ehdr *)kernel_buf; - if ( - (ehdr->e_ident[EI_MAG0] != ELFMAG0) || - (ehdr->e_ident[EI_MAG1] != ELFMAG1) || - (ehdr->e_ident[EI_MAG2] != ELFMAG2) || - (ehdr->e_ident[EI_MAG3] != ELFMAG3)) { - return "No ELF signature found on kernel\n"; - } - if (ehdr->e_ident[EI_CLASS] != ELFCLASS64) { - return "Not a 64bit ELF kernel\n"; - } - if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { - return "Not a little endian ELF kernel\n"; - } - if (le16_to_cpu(ehdr->e_type) != ET_EXEC) { - return "Not an executable kernel\n"; - } - if (le16_to_cpu(ehdr->e_machine) != EM_X86_64) { - return "Not an x86_64 kernel\n"; - } - if ( (ehdr->e_ident[EI_VERSION] != EV_CURRENT) || - (le32_to_cpu(ehdr->e_version) != EV_CURRENT)) { - return "Kernel not using ELF version 1.\n"; - } - if (le16_to_cpu(ehdr->e_phentsize) != sizeof(*phdr)) { - return "Kernel uses bad program header size.\n"; - } - phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff)); - phdrs = 0; - for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { - if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) - continue; - phdrs++; - } - if (phdrs == 0) { - return "No PT_LOAD segments!\n"; - } - parse_kernel_type = parse_elf64_kernel; - return 0; -} - -char *bzImage_i386_probe(char *kernel_buf, off_t kernel_size) -{ - struct x86_linux_header *hdr; - unsigned long offset; - int setup_sects; - hdr = (struct x86_linux_header *)kernel_buf; - - if (le16_to_cpu(hdr->boot_sector_magic) != 0xaa55) { - return "No bootsector magic"; - } - if (memcmp(hdr->header_magic, "HdrS", 4) != 0) { - return "Not a linux kernel"; - } - - if (le16_to_cpu(hdr->protocol_version) < 0x202) { - return "Kernel protcols version before 2.02 not supported"; - } - - setup_sects = hdr->setup_sects; - if (setup_sects == 0) { - setup_sects = 4; - } - offset = 512 + (512 *setup_sects); - if (offset > kernel_size) { - return "Not enough bytes"; - } - parse_kernel_type = parse_bzImage_kernel; - return 0; -} - -char *linux_i386_probe(char *kernel_buf, off_t kernel_size) -{ - char *result; - result = ""; - if (result) result = bzImage_i386_probe(kernel_buf, kernel_size); - if (result) result = vmlinux_i386_probe(kernel_buf, kernel_size); - if (result) result = bzImage_i386_probe(kernel_buf, kernel_size); - return result; -} - -#define NR_SECTIONS 16 - -struct kernel_info -{ - int phdrs; - void *kernel[NR_SECTIONS]; - size_t filesz[NR_SECTIONS]; - size_t memsz[NR_SECTIONS]; - size_t paddr[NR_SECTIONS]; - size_t vaddr[NR_SECTIONS]; - size_t entry; - size_t switch_64; - char *version; -}; - -static void parse_elf32_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size) -{ - Elf32_Ehdr *ehdr; - Elf32_Phdr *phdr; - int i; - int phdrs; - ehdr = (Elf32_Ehdr *)kernel_buf; - phdr = (Elf32_Phdr *)(kernel_buf + ehdr->e_phoff); - phdrs = 0; - for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { - if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) - continue; - if(phdrs == NR_SECTIONS) - die("NR_SECTIONS is too small\n"); - info->kernel[phdrs] = kernel_buf + le32_to_cpu(phdr[i].p_offset); - info->filesz[phdrs] = le32_to_cpu(phdr[i].p_filesz); - info->memsz[phdrs] = le32_to_cpu(phdr[i].p_memsz); - info->paddr[phdrs] = le32_to_cpu(phdr[i].p_paddr) & 0xfffffff; - info->vaddr[phdrs] = le32_to_cpu(phdr[i].p_vaddr); - phdrs++; - } - - if(!phdrs) - die("We need at least one phdr\n"); - - info->phdrs = phdrs; - info->entry = le32_to_cpu(ehdr->e_entry); - info->switch_64 = 0; //not convert from elf64 - info->version = "unknown"; -} - -static void parse_elf64_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size) -{ - Elf64_Ehdr *ehdr; - Elf64_Phdr *phdr; - int i; - int phdrs; - ehdr = (Elf64_Ehdr *)kernel_buf; - phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff)); - - phdrs = 0; - for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { - if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) - continue; - if(phdrs == NR_SECTIONS) - die("NR_SECTIONS is too small\n"); - info->kernel[phdrs] = kernel_buf + le64_to_cpu(phdr[i].p_offset); - info->filesz[phdrs] = le64_to_cpu(phdr[i].p_filesz); - info->memsz[phdrs] = le64_to_cpu(phdr[i].p_memsz); - info->paddr[phdrs] = le64_to_cpu(phdr[i].p_paddr) & 0xfffffff; - info->vaddr[phdrs] = le64_to_cpu(phdr[i].p_vaddr); - phdrs++; - } - - if(!phdrs) - die("We need at least one phdr\n"); - - info->phdrs = phdrs; - info->entry = le64_to_cpu(ehdr->e_entry); -#if 0 - if (info->entry != info->paddr[0]) { - info->entry = info->paddr[0]; // we still have startup_32 there - info->switch_64 = 0; //not convert from elf64 - } else -#endif - info->switch_64 = 1; //convert from elf64 - - info->version = "unknown"; -} - - -static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size) -{ - struct x86_linux_header *hdr; - unsigned long offset; - int setup_sects; - hdr = (struct x86_linux_header *)kernel_buf; - setup_sects = hdr->setup_sects; - if (setup_sects == 0) { - setup_sects = 4; - } - offset = 512 + (512 *setup_sects); - - info->kernel[0] = kernel_buf + offset; - info->filesz[0] = kernel_size - offset; - info->memsz[0] = 0x700000; - info->paddr[0] = 0x100000; - info->vaddr[0] = 0x100000; - info->phdrs = 1; - info->entry = info->paddr[0]; - info->switch_64 = 0; //not convert from elf64, even later bzImage become elf64, it still includes startup_32 - info->version = kernel_buf + 512 + le16_to_cpu(hdr->kver_addr); -} - -static void parse_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size) -{ - memset(info, 0, sizeof(*info)); - if (parse_kernel_type) { - parse_kernel_type(info, kernel_buf, kernel_size); - } - else { - die("Unknown kernel format"); - } -} - -void linux_i386_usage(void) -{ - printf( - " --command-line=<string> Set the command line to <string>\n" - " --append=<string> Set the command line to <string>\n" - " --initrd=<filename> Set the initrd to <filename>\n" - " --ramdisk=<filename> Set the initrd to <filename>\n" - " --ramdisk-base=<addr> Set the initrd load address to <addr>\n" - ); - return; -} - - -#define OPT_CMDLINE OPT_MAX+0 -#define OPT_RAMDISK OPT_MAX+1 -#define OPT_RAMDISK_BASE OPT_MAX+2 - -#define DEFAULT_RAMDISK_BASE (8*1024*1024) - -int linux_i386_mkelf(int argc, char **argv, - struct memelfheader *ehdr, char *kernel_buf, off_t kernel_size) -{ - const char *ramdisk, *cmdline; - unsigned long ramdisk_base; - char *payload_buf, *ramdisk_buf; - off_t payload_size, ramdisk_size; - struct memelfphdr *phdr; - struct memelfnote *note; - struct kernel_info kinfo; - struct image_parameters *params; - int index; - int i; - - int opt; - static const struct option options[] = { - MKELF_OPTIONS - { "command-line", 1, 0, OPT_CMDLINE }, - { "append", 1, 0, OPT_CMDLINE }, - { "initrd", 1, 0, OPT_RAMDISK }, - { "ramdisk", 1, 0, OPT_RAMDISK }, - { "ramdisk-base", 1, 0, OPT_RAMDISK_BASE }, - { 0 , 0, 0, 0 }, - }; - static const char short_options[] = MKELF_OPT_STR; - - ramdisk_base = DEFAULT_RAMDISK_BASE; - ramdisk = 0; - cmdline=""; - - while((opt = getopt_long(argc, argv, short_options, options, 0)) != -1) { - switch(opt) { - case '?': - error("Unknown option %s\n", argv[optind]); - break; - case OPT_RAMDISK_BASE: - { - char *end; - unsigned long base; - base = strtoul(optarg, &end, 0); - if ((end == optarg) || (*end != '\0')) { - error("Invalid ramdisk base\n"); - } - ramdisk_base = base; - } - case OPT_RAMDISK: - ramdisk = optarg; - break; - case OPT_CMDLINE: - cmdline = optarg; - break; - default: - break; - } - } - ehdr->ei_class = ELFCLASS32; - ehdr->ei_data = ELFDATA2LSB; - ehdr->e_type = ET_EXEC; - ehdr->e_machine = EM_386; - - /* locate the payload buffer */ - payload_buf = payload; - payload_size = sizeof(payload); - - /* slurp the input files */ - ramdisk_buf = slurp_file(ramdisk, &ramdisk_size); - - /* parse the kernel */ - parse_kernel(&kinfo, kernel_buf, kernel_size); - - /* Find the parameters */ - params = (void *)(payload_buf + (payload_size - sizeof(*params))); - - /* A sanity check against bad versions of binutils */ - if (params->convert_magic != CONVERT_MAGIC) { - die("Internal error convert_magic %08x != %08x\n", - params->convert_magic, CONVERT_MAGIC); - } - - /* Copy the command line */ - strncpy(params->cmdline, cmdline, sizeof(params->cmdline)); - params->cmdline[sizeof(params->cmdline)-1]= '\0'; - - - /* Add a program header for the note section */ - index = 4; - index += (kinfo.phdrs - 1); - index += ramdisk_size ? 1:0; - phdr = add_program_headers(ehdr, index); - - /* Fill in the program headers*/ - phdr[0].p_type = PT_NOTE; - - /* Fill in the converter program headers */ - phdr[1].p_paddr = CONVERTLOC; - phdr[1].p_vaddr = CONVERTLOC; - phdr[1].p_filesz = payload_size; - phdr[1].p_memsz = payload_size + params->bss_size; - phdr[1].p_data = payload; - - /* Reserve space for the REAL MODE DATA segment AND the GDT segment */ - phdr[2].p_paddr = REAL_MODE_DATA_LOC; - phdr[2].p_vaddr = REAL_MODE_DATA_LOC; - phdr[2].p_filesz = 0; - if(!kinfo.switch_64) - phdr[2].p_memsz = (GDTLOC - REAL_MODE_DATA_LOC) + params->gdt_size; - else - phdr[2].p_memsz = (PGTLOC - REAL_MODE_DATA_LOC) + params->pgt_size; - phdr[2].p_data = 0; - - if( (phdr[1].p_paddr + phdr[1].p_memsz) > phdr[2].p_paddr) { - die("Internal error: need to increase REAL_MODE_DATA_LOC !\n"); - } - - index = 3; - /* Put the second kernel frament if present */ - for(i=0;i<kinfo.phdrs;i++) { - phdr[index].p_paddr = kinfo.paddr[i]; - phdr[index].p_vaddr = kinfo.vaddr[i]; - phdr[index].p_filesz = kinfo.filesz[i]; - phdr[index].p_memsz = kinfo.memsz[i]; - phdr[index].p_data = kinfo.kernel[i]; - index++; - } - - /* Put the ramdisk at ramdisk base. - */ - params->initrd_start = params->initrd_size = 0; - if (ramdisk_size) { - if( (phdr[index-1].p_paddr + phdr[index-1].p_memsz) > ramdisk_base) { - die("need to increase increase ramdisk_base !\n"); - } - - phdr[index].p_paddr = ramdisk_base; - phdr[index].p_vaddr = ramdisk_base; - phdr[index].p_filesz = ramdisk_size; - phdr[index].p_memsz = ramdisk_size; - phdr[index].p_data = ramdisk_buf; - params->initrd_start = phdr[index].p_paddr; - params->initrd_size = phdr[index].p_filesz; - index++; - } - - /* Set the start location */ - params->entry = kinfo.entry; - params->switch_64 = kinfo.switch_64; - ehdr->e_entry = phdr[1].p_paddr; - - /* Setup the elf notes */ - note = add_notes(ehdr, 3); - note[0].n_type = EIN_PROGRAM_NAME; - note[0].n_name = "ELFBoot"; - note[0].n_desc = "Linux"; - note[0].n_descsz = strlen(note[0].n_desc)+1; - - note[1].n_type = EIN_PROGRAM_VERSION; - note[1].n_name = "ELFBoot"; - note[1].n_desc = kinfo.version; - note[1].n_descsz = strlen(note[1].n_desc); - - note[2].n_type = EIN_PROGRAM_CHECKSUM; - note[2].n_name = "ELFBoot"; - note[2].n_desc = 0; - note[2].n_descsz = 2; - - return 0; -} - diff --git a/util/mkelfImage/linux-i386/uniform_boot.h b/util/mkelfImage/linux-i386/uniform_boot.h deleted file mode 100644 index ac814967f6..0000000000 --- a/util/mkelfImage/linux-i386/uniform_boot.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef _LINUX_UNIFORM_BOOT_H -#define _LINUX_UNIFORM_BOOT_H - -/* The uniform boot environment information is restricted to - * hardware information. In particular for a simple enough machine - * all of the environment information should be able to reside in - * a rom and not need to be moved. This information is the - * information a trivial boot room can pass to linux to let it - * run the hardware. - * - * Also all of the information should be Position Independent Data. - * That is it should be safe to relocated any of the information - * without it's meaning/correctnes changing. The exception is the - * uniform_boot_header with it's two pointers arg & env. - * - * The addresses in the arg & env pointers must be physical - * addresses. A physical address is an address you put in the page - * table. - * - * The Command line is for user policy. Things like the default - * root device. - * - */ - -struct uniform_boot_header -{ - unsigned long header_bytes; - unsigned long header_checksum; - unsigned long arg; - unsigned long arg_bytes; - unsigned long env; - unsigned long env_bytes; -}; - -/* Every entry in the boot enviroment list will correspond to a boot - * info record. Encoding both type and size. The type is obviously - * so you can tell what it is. The size allows you to skip that - * boot enviroment record if you don't know what it easy. This allows - * forward compatibility with records not yet defined. - */ -struct ube_record { - unsigned long tag; /* tag ID */ - unsigned long size; /* size of record (in bytes) */ - unsigned long data[0]; /* data */ -}; - - -#define UBE_TAG_MEMORY 0x0001 - -struct ube_memory_range { - unsigned long long start; - unsigned long long size; - unsigned long type; -#define UBE_MEM_RAM 1 -#define UBE_MEM_RESERVED 2 -#define UBE_MEM_ACPI 3 -#define UBE_MEM_NVS 4 - -}; - -struct ube_memory { - unsigned long tag; - unsigned long size; - struct ube_memory_range map[0]; -}; - -#endif /* _LINUX_UNIFORM_BOOT_H */ diff --git a/util/mkelfImage/linux-i386/x86-linux.h b/util/mkelfImage/linux-i386/x86-linux.h deleted file mode 100644 index 521988815c..0000000000 --- a/util/mkelfImage/linux-i386/x86-linux.h +++ /dev/null @@ -1,162 +0,0 @@ -#ifndef X86_LINUX_H -#define X86_LINUX_H - -#define E820MAP 0x2d0 /* our map */ -#define E820MAX 32 /* number of entries in E820MAP */ -#define E820NR 0x1e8 /* # entries in E820MAP */ - -#ifndef ASSEMBLY - -struct e820entry { - uint64_t addr; /* start of memory segment */ - uint64_t size; /* size of memory segment */ - uint32_t type; /* type of memory segment */ -#define E820_RAM 1 -#define E820_RESERVED 2 -#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */ -#define E820_NVS 4 -} __attribute__((packed)); - -/* FIXME expand on drive_info_struct... */ -struct drive_info_struct { - uint8_t dummy[32]; -}; -struct sys_desc_table { - uint16_t length; - uint8_t table[318]; -}; - -struct apm_bios_info { - uint16_t version; /* 0x40 */ - uint16_t cseg; /* 0x42 */ - uint32_t offset; /* 0x44 */ - uint16_t cseg_16; /* 0x48 */ - uint16_t dseg; /* 0x4a */ - uint16_t flags; /* 0x4c */ - uint16_t cseg_len; /* 0x4e */ - uint16_t cseg_16_len; /* 0x50 */ - uint16_t dseg_len; /* 0x52 */ - uint8_t reserved[44]; /* 0x54 */ -}; - - -struct x86_linux_param_header { - uint8_t orig_x; /* 0x00 */ - uint8_t orig_y; /* 0x01 */ - uint16_t ext_mem_k; /* 0x02 -- EXT_MEM_K sits here */ - uint16_t orig_video_page; /* 0x04 */ - uint8_t orig_video_mode; /* 0x06 */ - uint8_t orig_video_cols; /* 0x07 */ - uint16_t unused2; /* 0x08 */ - uint16_t orig_video_ega_bx; /* 0x0a */ - uint16_t unused3; /* 0x0c */ - uint8_t orig_video_lines; /* 0x0e */ - uint8_t orig_video_isVGA; /* 0x0f */ - uint16_t orig_video_points; /* 0x10 */ - - /* VESA graphic mode -- linear frame buffer */ - uint16_t lfb_width; /* 0x12 */ - uint16_t lfb_height; /* 0x14 */ - uint16_t lfb_depth; /* 0x16 */ - uint32_t lfb_base; /* 0x18 */ - uint32_t lfb_size; /* 0x1c */ - uint16_t cl_magic; /* 0x20 */ -#define CL_MAGIC_VALUE 0xA33F - uint16_t cl_offset; /* 0x22 */ - uint16_t lfb_linelength; /* 0x24 */ - uint8_t red_size; /* 0x26 */ - uint8_t red_pos; /* 0x27 */ - uint8_t green_size; /* 0x28 */ - uint8_t green_pos; /* 0x29 */ - uint8_t blue_size; /* 0x2a */ - uint8_t blue_pos; /* 0x2b */ - uint8_t rsvd_size; /* 0x2c */ - uint8_t rsvd_pos; /* 0x2d */ - uint16_t vesapm_seg; /* 0x2e */ - uint16_t vesapm_off; /* 0x30 */ - uint16_t pages; /* 0x32 */ - uint8_t reserved4[12]; /* 0x34 -- 0x3f reserved for future expansion */ - - struct apm_bios_info apm_bios_info; /* 0x40 */ - struct drive_info_struct drive_info; /* 0x80 */ - struct sys_desc_table sys_desc_table; /* 0xa0 */ - uint32_t alt_mem_k; /* 0x1e0 */ - uint8_t reserved5[4]; /* 0x1e4 */ - uint8_t e820_map_nr; /* 0x1e8 */ - uint8_t reserved6[8]; /* 0x1e9 */ - uint8_t setup_sects; /* 0x1f1 */ - uint16_t mount_root_rdonly; /* 0x1f2 */ - uint8_t reserved7[4]; /* 0x1f4 */ - uint16_t ramdisk_flags; /* 0x1f8 */ -#define RAMDISK_IMAGE_START_MASK 0x07FF -#define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 - uint16_t vid_mode; /* 0x1fa */ - uint16_t root_dev; /* 0x1fc */ - uint8_t reserved9[1]; /* 0x1fe */ - uint8_t aux_device_info; /* 0x1ff */ - /* 2.00+ */ - uint8_t reserved10[2]; /* 0x200 */ - uint8_t header_magic[4]; /* 0x202 */ - uint16_t protocol_version; /* 0x206 */ - uint8_t reserved11[8]; /* 0x208 */ - uint8_t loader_type; /* 0x210 */ -#define LOADER_TYPE_LOADLIN 1 -#define LOADER_TYPE_BOOTSECT_LOADER 2 -#define LOADER_TYPE_SYSLINUX 3 -#define LOADER_TYPE_ETHERBOOT 4 -#define LOADER_TYPE_UNKNOWN 0xFF - uint8_t loader_flags; /* 0x211 */ - uint8_t reserved12[2]; /* 0x212 */ - uint32_t kernel_start; /* 0x214 */ - uint32_t initrd_start; /* 0x218 */ - uint32_t initrd_size; /* 0x21c */ - uint8_t reserved13[4]; /* 0x220 */ - /* 2.01+ */ - uint16_t heap_end_ptr; /* 0x224 */ - uint8_t reserved14[2]; /* 0x226 */ - /* 2.02+ */ - uint32_t cmd_line_ptr; /* 0x228 */ - /* 2.03+ */ - uint32_t initrd_addr_max; /* 0x22c */ - uint8_t reserved15[160]; /* 0x230 */ - struct e820entry e820_map[E820MAX]; /* 0x2d0 */ - /* 0x550 */ -#define COMMAND_LINE_SIZE 256 -}; - -struct x86_linux_header { - uint8_t reserved1[0x1f1]; /* 0x000 */ - uint8_t setup_sects; /* 0x1f1 */ - uint16_t root_flags; /* 0x1f2 */ - uint8_t reserved2[6]; /* 0x1f4 */ - uint16_t vid_mode; /* 0x1fa */ - uint16_t root_dev; /* 0x1fc */ - uint16_t boot_sector_magic; /* 0x1fe */ - /* 2.00+ */ - uint8_t reserved3[2]; /* 0x200 */ - uint8_t header_magic[4]; /* 0x202 */ - uint16_t protocol_version; /* 0x206 */ - uint32_t realmode_swtch; /* 0x208 */ - uint16_t start_sys; /* 0x20c */ - uint16_t kver_addr; /* 0x20e */ - uint8_t type_of_loader; /* 0x210 */ - uint8_t loadflags; /* 0x211 */ - uint16_t setup_move_size; /* 0x212 */ - uint32_t code32_start; /* 0x214 */ - uint32_t ramdisk_image; /* 0x218 */ - uint32_t ramdisk_size; /* 0x21c */ - uint8_t reserved4[4]; /* 0x220 */ - /* 2.01+ */ - uint16_t heap_end_ptr; /* 0x224 */ - uint8_t reserved5[2]; /* 0x226 */ - /* 2.02+ */ - uint32_t cmd_line_ptr; /* 0x228 */ - /* 2.03+ */ - uint32_t initrd_addr_max; /* 0x22c */ - uint8_t tail[32*1024]; /* 0x230 */ -} __attribute__ ((packed)); - -#endif /* ASSEMBLY */ - -#endif /* X86_LINUX_H */ diff --git a/util/mkelfImage/linux-ia64/Makefile b/util/mkelfImage/linux-ia64/Makefile deleted file mode 100644 index 38f5d8cd34..0000000000 --- a/util/mkelfImage/linux-ia64/Makefile +++ /dev/null @@ -1,33 +0,0 @@ -LIA64_DIR=linux-ia64 -LIA64_OBJ=$(OBJDIR)/$(LIA64_DIR) -LIA64_DEP=Makefile Makefile.conf $(LIA64_DIR)/Makefile - -$(LIA64_OBJ)/mkelf-linux-ia64.o: $(LIA64_DIR)/mkelf-linux-ia64.c $(LIA64_DIR)/convert.bin.c $(LIA64_DEP) - $(MKDIR) -p $(@D) - $(HOST_CC) $(HOST_CFLAGS) -c -g $< -o $@ - -ifdef IA64_CC - -$(LIA64_DIR)/convert.bin.c: $(LIA64_OBJ)/convert.bin $(OBJDIR)/bin/bin-to-hex $(LIA64_DEP) - $(MKDIR) -p $(@D) - $(OBJDIR)/bin/bin-to-hex < $(LIA64_OBJ)/convert.bin > $@ - -$(LIA64_OBJ)/convert.bin: $(LIA64_OBJ)/convert $(LIA64_DEP) - $(MKDIR) -p $(@D) - $(IA64_OBJCOPY) -O binary $< $@ - -CONVERT_LIA64_OBJS=$(LIA64_OBJ)/head.o $(LIA64_OBJ)/convert_params.o -$(LIA64_OBJ)/convert: $(LIA64_DIR)/convert.lds $(CONVERT_LIA64_OBJS) $(LIA64_DEP) - $(MKDIR) -p $(@D) - $(IA64_LD) $(IA64_LDFLAGS) -T $(LIA64_DIR)/convert.lds -o $@ $(CONVERT_LIA64_OBJS) - -$(LIA64_OBJ)/head.o: $(LIA64_DIR)/head.S $(LIA64_DIR)/convert.h - $(MKDIR) -p $(@D) - $(IA64_CPP) $(IA64_CFLAGS) -D ASSEMBLY $< | $(IA64_AS) $(IA64_ASFLAGS) -o $@ - -$(LIA64_OBJ)/convert_params.o: $(LIA64_DIR)/convert_params.c $(LIA64_DIR)/convert.h $(LIA64_DEP) - $(IA64_CC) $(IA64_CFLAGS) -c -o $@ $< - - -endif - diff --git a/util/mkelfImage/linux-ia64/convert.bin.c b/util/mkelfImage/linux-ia64/convert.bin.c deleted file mode 100644 index 2b8bcc7fa9..0000000000 --- a/util/mkelfImage/linux-ia64/convert.bin.c +++ /dev/null @@ -1,310 +0,0 @@ -0x00, 0x08, 0x19, 0x06, 0x80, 0x05, 0x20, 0x02, 0x00, 0x62, 0x00, 0xc0, 0x01, 0x00, 0xc0, 0x00, -0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0x01, 0xe2, 0x8b, 0x6f, -0x0a, 0x08, 0x38, 0x1e, 0x05, 0x20, 0x30, 0x02, 0x80, 0x00, 0x42, 0x80, 0x04, 0xe0, 0x00, 0x84, -0x1c, 0x28, 0x41, 0x03, 0x00, 0x26, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x70, 0x0d, 0x00, 0x50, -0x0d, 0xe0, 0x00, 0x10, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0xe0, 0x81, 0x0d, 0x00, 0x98, -0x0a, 0x80, 0x00, 0x1e, 0x18, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0x20, 0x00, 0x09, 0x00, 0x07, -0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x08, 0x01, 0x55, 0x00, 0x00, 0x20, 0x0a, 0x00, 0x07, -0x1d, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x10, 0x00, 0x80, 0x00, -0x00, 0x38, 0x28, 0x40, 0x86, 0x39, 0x00, 0x6a, 0x00, 0x00, 0x48, 0x00, 0x00, 0x00, 0x04, 0x00, -0x13, 0x00, 0x00, 0x00, 0x01, 0x80, 0x41, 0x04, 0x00, 0xc2, 0x01, 0x00, 0xf0, 0xff, 0xff, 0x48, -0x00, 0x60, 0x3d, 0x1c, 0x80, 0x05, 0x00, 0x41, 0x30, 0x00, 0x42, 0x20, 0x02, 0x60, 0x00, 0x84, -0x0a, 0x60, 0x40, 0x18, 0x3f, 0x23, 0xd0, 0x02, 0x90, 0x44, 0x08, 0x60, 0x05, 0x00, 0xc4, 0x00, -0x00, 0x80, 0x9f, 0x20, 0xd9, 0x17, 0xa0, 0x42, 0x32, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0a, 0x80, 0x9b, 0x22, 0xd9, 0x17, 0x00, 0x2f, 0x41, 0xb2, 0x2f, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0a, 0x80, 0x93, 0x22, 0xd9, 0x17, 0x00, 0x1f, 0x41, 0xb2, 0x2f, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0a, 0x00, 0x88, 0x22, 0xd8, 0x11, 0x00, 0x08, 0x41, 0xb0, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x70, 0x01, 0x40, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x70, 0x51, 0x00, -0x10, 0x38, 0x00, 0x1c, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x70, 0x00, 0x00, 0x43, -0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0xb8, 0x28, 0x00, 0xc0, 0x50, 0x72, 0x1c, 0xe6, -0x10, 0x70, 0x01, 0x1c, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x70, 0x00, 0x00, 0x43, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x48, 0xff, 0xff, 0x58, -0x0b, 0x00, 0x05, 0x40, 0x00, 0x21, 0xe0, 0x02, 0x80, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0xb8, 0x28, 0x00, 0xe0, 0x00, 0x70, 0x18, 0xe6, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xb0, 0xff, 0xff, 0x4a, -0x00, 0x00, 0xb4, 0x48, 0x2a, 0x04, 0x00, 0x60, 0x01, 0x55, 0x00, 0x00, 0xb0, 0x0a, 0x00, 0x07, -0x11, 0x60, 0xc0, 0x19, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, -0x01, 0x00, 0x05, 0x40, 0x00, 0x21, 0x90, 0x82, 0x30, 0x00, 0x42, 0x00, 0xc2, 0x01, 0x00, 0x90, -0x0b, 0x78, 0x00, 0x40, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x78, 0x50, 0x00, -0x11, 0x38, 0xcc, 0x1d, 0x86, 0x39, 0xe0, 0x00, 0x3c, 0x28, 0x80, 0x03, 0x80, 0x03, 0x00, 0x43, -0x1d, 0x38, 0xb0, 0x1d, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0xf0, 0x80, 0xf0, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x50, 0x03, 0x00, 0x43, -0x10, 0x38, 0xa0, 0x1d, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x00, 0x03, 0x00, 0x43, -0x0b, 0x78, 0x00, 0x40, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x78, 0x50, 0x00, -0x1d, 0x70, 0x80, 0x1c, 0x2e, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x11, 0x38, 0xe0, 0x1d, 0x86, 0x39, 0xe0, 0x00, 0x3c, 0x28, 0x80, 0x03, 0x00, 0x02, 0x00, 0x43, -0x11, 0x38, 0x90, 0x1d, 0x86, 0x39, 0xe0, 0x00, 0x3c, 0x28, 0x80, 0x03, 0xa0, 0x00, 0x00, 0x43, -0x0a, 0x38, 0x8c, 0x1d, 0x86, 0xf9, 0xe1, 0x00, 0xa8, 0x00, 0xc2, 0x43, 0x85, 0x50, 0x01, 0x84, -0xcb, 0x08, 0x3c, 0x52, 0x80, 0xd5, 0xe1, 0x00, 0x38, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0xe0, 0x08, 0x38, 0x52, 0x80, 0x15, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x1d, 0x40, 0x41, 0x18, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x10, 0x30, 0xa0, 0x52, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xd0, 0xfe, 0xff, 0x4a, -0x0a, 0x70, 0x05, 0x50, 0x00, 0x14, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x05, 0x70, 0x51, 0x00, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xe8, 0xfd, 0xff, 0x58, -0x10, 0x30, 0xa0, 0x52, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xe0, 0xff, 0xff, 0x4a, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x90, 0xfe, 0xff, 0x48, -0x0a, 0x38, 0x70, 0x20, 0x86, 0xb1, 0xe1, 0x00, 0xa8, 0x00, 0xc2, 0xc3, 0x01, 0x50, 0x01, 0x84, -0xc2, 0x50, 0x21, 0x54, 0x00, 0xe1, 0xa1, 0x42, 0xa8, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0xc9, 0x70, 0x00, 0x1c, 0x10, 0xd0, 0x01, 0x01, 0x38, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x03, 0x00, 0x00, 0x00, 0x01, 0x80, 0x01, 0x01, 0x38, 0x2c, 0x00, 0xe0, 0x00, 0x01, 0x18, 0xc0, -0xe2, 0x70, 0xb4, 0x00, 0x00, 0xe4, 0x01, 0x01, 0x40, 0x0a, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, -0xea, 0x08, 0x38, 0x52, 0x80, 0x15, 0x80, 0x02, 0xa4, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0x00, 0x30, 0x40, 0x00, 0xe1, 0x18, 0xf0, 0xf8, 0x43, 0x00, 0x29, 0x00, 0x00, 0x00, 0x04, 0x00, -0x05, 0x00, 0x00, 0x00, 0x01, 0x40, 0x66, 0x66, 0x66, 0x66, 0x66, 0xc0, 0x71, 0xd6, 0x30, 0x63, -0x0a, 0x38, 0x38, 0x00, 0xe1, 0x18, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0d, 0x00, 0x00, 0x00, 0x01, 0x00, 0x60, 0x00, 0x18, 0x0e, 0x77, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x70, 0x18, 0x00, 0xe1, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x51, 0x70, 0xf4, 0x52, -0x0b, 0x70, 0x38, 0x1e, 0x05, 0x20, 0xf0, 0x70, 0x38, 0x22, 0x40, 0xe0, 0x00, 0x70, 0x18, 0xe4, -0x0b, 0x78, 0x3c, 0x00, 0x10, 0x20, 0xf0, 0x80, 0x3c, 0x0a, 0x40, 0x00, 0x02, 0x70, 0x00, 0x84, -0x1d, 0x78, 0xc0, 0x1e, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x11, 0x08, 0x3c, 0x52, 0x80, 0x15, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x80, 0xff, 0xff, 0x4a, -0x1d, 0x80, 0xfc, 0x53, 0x3f, 0x23, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x10, 0x30, 0xa0, 0x20, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xa0, 0xfe, 0xff, 0x4b, -0x09, 0x70, 0x00, 0x20, 0x00, 0x10, 0xf0, 0x00, 0xa0, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x09, 0xf8, 0x3f, 0x20, 0x81, 0x17, 0x10, 0x70, 0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x04, 0x00, -0x10, 0x30, 0xa0, 0x20, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xe0, 0xff, 0xff, 0x4a, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x60, 0xfe, 0xff, 0x48, -0x02, 0x38, 0x70, 0x20, 0x86, 0x31, 0x20, 0x01, 0x3d, 0x58, 0xc0, 0xc3, 0x01, 0x50, 0x01, 0x84, -0xc9, 0x70, 0x00, 0x54, 0x00, 0xe1, 0xa1, 0x42, 0xa8, 0x00, 0x42, 0x43, 0x85, 0x50, 0x01, 0x84, -0xec, 0x88, 0x00, 0x1c, 0x18, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0xd0, 0x88, 0x00, 0x1c, 0x10, 0x10, 0x70, 0x80, 0x00, 0x0c, 0xe1, 0x03, 0x20, 0xfe, 0xff, 0x4b, -0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0x40, 0x24, 0x00, 0x00, 0xc2, 0x87, 0xfc, 0x8c, -0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0x01, 0xe2, 0xff, 0x6f, -0x01, 0x78, 0x04, 0x1e, 0x00, 0x20, 0xe0, 0x70, 0x44, 0x80, 0x3c, 0xe0, 0x00, 0x01, 0x18, 0xc2, -0x03, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x70, 0x3c, 0x1c, 0x2c, 0x20, 0xe0, 0x70, 0x3c, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x70, 0x00, 0x1c, 0x00, 0x10, 0xe0, 0x90, 0x38, 0x1c, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, -0x10, 0x08, 0x38, 0x52, 0x80, 0x15, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x90, 0xff, 0xff, 0x4a, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x90, 0xfd, 0xff, 0x48, -0x02, 0x00, 0x05, 0x40, 0x00, 0x21, 0x00, 0x61, 0x00, 0x00, 0x48, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x70, 0x00, 0x40, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x70, 0x50, 0x00, -0x10, 0x38, 0xa0, 0x1d, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xf0, 0xfc, 0xff, 0x4a, -0x00, 0x80, 0x10, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x10, 0x00, 0x05, 0x40, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xd0, 0xfc, 0xff, 0x48, -0x02, 0x70, 0x00, 0x54, 0x00, 0x21, 0xa0, 0x42, 0xa8, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x40, 0x01, 0x1c, 0x18, 0x10, 0xe0, 0x00, 0xa0, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0x38, 0x28, 0x00, 0xe0, 0x00, 0x70, 0x18, 0xe6, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xe0, 0xfb, 0xff, 0x4a, -0x0a, 0x70, 0x05, 0x50, 0x00, 0x14, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x05, 0x70, 0x51, 0x00, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xf8, 0xfa, 0xff, 0x58, -0x0b, 0x70, 0x00, 0x50, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x70, 0x50, 0x00, -0x10, 0x38, 0x00, 0x1c, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xd0, 0xff, 0xff, 0x4a, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x90, 0xfb, 0xff, 0x48, -0x00, 0x70, 0xfc, 0x45, 0x3f, 0x23, 0x20, 0x00, 0x04, 0x65, 0x00, 0x00, 0x01, 0x00, 0x01, 0x84, -0x1d, 0x38, 0x00, 0x44, 0x06, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x40, 0x00, 0x00, 0x43, -0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x70, 0x04, 0x55, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x1d, 0x70, 0x04, 0x42, 0x00, 0x14, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x11, 0x08, 0x38, 0x10, 0x80, 0x15, 0x00, 0x00, 0x00, 0x02, 0x00, 0xa0, 0xf0, 0xff, 0xff, 0x48, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x10, 0x04, 0x55, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, -0x1d, 0x80, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x10, 0x30, 0x40, 0x44, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x50, 0x00, 0x00, 0x43, -0x00, 0x78, 0x00, 0x40, 0x00, 0x10, 0x00, 0x09, 0x40, 0x00, 0x42, 0x00, 0x14, 0x00, 0x01, 0x84, -0x0a, 0x70, 0x00, 0x42, 0x00, 0x10, 0x80, 0x80, 0x88, 0x12, 0x68, 0x20, 0x14, 0x08, 0x01, 0x84, -0x1d, 0x30, 0x38, 0x1e, 0x87, 0x38, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0xf3, 0x40, 0x3c, 0x1c, 0x05, 0xe0, 0x41, 0x04, 0x00, 0xc2, 0x01, 0x04, 0xd0, 0xff, 0xff, 0x4a, -0x11, 0x40, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, -0x1d, 0x78, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x10, 0x30, 0x3c, 0x44, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x60, 0x00, 0x00, 0x43, -0x0b, 0x70, 0x80, 0x1e, 0x00, 0x20, 0xe0, 0x00, 0x38, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0x38, 0x28, 0x00, 0xe0, 0x00, 0x70, 0x18, 0xe6, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x30, 0x00, 0x00, 0x43, -0x1d, 0x78, 0x04, 0x1e, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x11, 0x30, 0x3c, 0x44, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xc0, 0xff, 0xff, 0x4a, -0x10, 0x88, 0x00, 0x00, 0x00, 0x21, 0x60, 0x78, 0x88, 0x0e, 0xe8, 0x03, 0x80, 0x00, 0x00, 0x43, -0x01, 0x90, 0x3c, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x70, 0x84, 0x22, 0x00, 0x20, 0x00, 0x01, 0x38, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0x40, 0x28, 0x00, 0xe0, 0x00, 0x70, 0x18, 0xe6, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x40, 0x00, 0x00, 0x43, -0x09, 0x88, 0x04, 0x22, 0x00, 0x21, 0x10, 0x80, 0x48, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x04, 0x00, -0x1d, 0x70, 0x44, 0x1e, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x10, 0x30, 0x38, 0x44, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xb0, 0xff, 0xff, 0x4a, -0x0b, 0x78, 0x3c, 0x22, 0x00, 0x20, 0x60, 0x78, 0x88, 0x0e, 0x68, 0x00, 0x00, 0x00, 0x04, 0x00, -0xeb, 0x78, 0xfc, 0x45, 0x3f, 0x23, 0xe0, 0x00, 0x3d, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, -0x11, 0x00, 0x00, 0x1c, 0x80, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, -0x00, 0x28, 0x25, 0x0c, 0x80, 0x05, 0x80, 0x02, 0x00, 0x10, 0x48, 0x40, 0x04, 0x00, 0x20, 0x90, -0x00, 0x08, 0x01, 0x40, 0x00, 0x21, 0x40, 0x02, 0x00, 0x62, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x60, 0x04, 0x10, 0x00, 0x68, -0x05, 0x18, 0x05, 0x46, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0x84, 0xe3, 0xff, 0x6f, -0x19, 0x38, 0x05, 0x4e, 0x00, 0x20, 0x60, 0x02, 0x8c, 0x30, 0x20, 0x00, 0xa8, 0xfe, 0xff, 0x58, -0x01, 0x00, 0x01, 0x46, 0x18, 0x10, 0x00, 0x28, 0x01, 0x55, 0x00, 0x00, 0x40, 0x0a, 0x00, 0x07, -0x11, 0x10, 0x0c, 0x00, 0x80, 0x05, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x88, 0xfe, 0xff, 0x48, -0x0a, 0x80, 0x24, 0x02, 0x80, 0x05, 0xf0, 0x40, 0x80, 0x00, 0x42, 0x00, 0x02, 0x01, 0x01, 0x84, -0x00, 0x88, 0x60, 0x40, 0x00, 0x21, 0x20, 0x01, 0x81, 0x00, 0x42, 0x80, 0xc2, 0x02, 0x01, 0x84, -0x09, 0x70, 0x20, 0x41, 0x00, 0x21, 0x30, 0x41, 0x81, 0x00, 0x42, 0x60, 0xe4, 0x02, 0x01, 0x84, -0x00, 0x20, 0xc1, 0x40, 0x00, 0x21, 0x50, 0x92, 0x81, 0x00, 0x42, 0xc0, 0x84, 0x03, 0x01, 0x84, -0x05, 0xe8, 0x00, 0x1e, 0x18, 0xd0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0x04, 0x10, 0x00, 0x68, -0x09, 0x38, 0x05, 0x4e, 0x00, 0x20, 0x80, 0x02, 0x38, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x00, 0x40, 0x20, 0x4f, 0x00, 0x21, 0x10, 0x42, 0x9c, 0x00, 0x42, 0x40, 0x04, 0x39, 0x01, 0x84, -0x00, 0xd0, 0x00, 0x20, 0x18, 0x10, 0xe0, 0xc1, 0x9c, 0x00, 0x42, 0xe0, 0x03, 0x3a, 0x01, 0x84, -0x09, 0xb0, 0x00, 0x22, 0x18, 0x10, 0x70, 0x01, 0x48, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x00, 0x70, 0x00, 0x4a, 0x08, 0x10, 0xc0, 0x41, 0x9d, 0x00, 0x42, 0x60, 0xc3, 0x3a, 0x01, 0x84, -0x00, 0x90, 0x00, 0x28, 0x08, 0x10, 0x80, 0x71, 0x9d, 0x00, 0x42, 0x80, 0x22, 0x3b, 0x01, 0x84, -0x09, 0x78, 0x00, 0x4c, 0x18, 0x10, 0x30, 0x01, 0x4c, 0x20, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x00, 0xc8, 0xc0, 0x4e, 0x00, 0x21, 0x50, 0xc1, 0x9d, 0x00, 0x42, 0xc0, 0x00, 0x40, 0x1d, 0xe4, -0x08, 0x80, 0x00, 0x46, 0x08, 0x10, 0x10, 0x01, 0x90, 0x10, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x02, 0x00, 0x38, 0x28, 0x88, 0x11, 0x40, 0x01, 0x9e, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0x08, 0x00, 0x3c, 0x2a, 0x98, 0x11, 0x00, 0xe8, 0x84, 0x30, 0x23, 0xe0, 0x01, 0x04, 0x01, 0x84, -0x08, 0x00, 0x68, 0x44, 0x98, 0x11, 0x00, 0xb0, 0x78, 0x30, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, -0x08, 0x00, 0x5c, 0x3e, 0x98, 0x11, 0x00, 0x98, 0x70, 0x20, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, -0x08, 0x00, 0x48, 0x36, 0x88, 0x11, 0x00, 0x80, 0x60, 0x10, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, -0x10, 0x00, 0x44, 0x32, 0x88, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x40, 0x00, 0x00, 0x42, -0x0b, 0x70, 0x00, 0x10, 0x18, 0x10, 0x70, 0x00, 0x38, 0x0c, 0x72, 0x00, 0x00, 0x00, 0x04, 0x00, -0xe9, 0x70, 0x00, 0x1e, 0x18, 0xd0, 0x01, 0x40, 0x21, 0x30, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, -0xe0, 0x00, 0x38, 0x28, 0x98, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x1d, 0x70, 0x00, 0x40, 0x18, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x11, 0x30, 0x00, 0x1c, 0x07, 0x39, 0x00, 0x02, 0x38, 0x00, 0x42, 0x83, 0x08, 0x00, 0x84, 0x02, -0x11, 0x10, 0x04, 0x00, 0x80, 0x05, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x08, 0xfe, 0xff, 0x48, -0x00, 0x40, 0x31, 0x12, 0x80, 0x05, 0x10, 0x02, 0x00, 0x00, 0x42, 0xc0, 0x04, 0x00, 0x00, 0x84, -0x18, 0x20, 0x01, 0x00, 0x00, 0x21, 0xe0, 0x20, 0x80, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x20, -0x02, 0x10, 0x31, 0x40, 0x00, 0x21, 0x70, 0x02, 0x00, 0x62, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x70, 0x00, 0x1c, 0x10, 0x10, 0x00, 0x02, 0x39, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, -0x10, 0x30, 0x88, 0x40, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xd0, 0x00, 0x00, 0x43, -0x02, 0x70, 0x00, 0x44, 0x00, 0x21, 0x90, 0x62, 0x88, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0x0b, 0x80, 0x10, 0x1c, 0x10, 0x14, 0xe0, 0x00, 0x38, 0x20, 0x20, 0xe0, 0x31, 0x80, 0x00, 0x84, -0x0b, 0x78, 0xf0, 0x1f, 0x2c, 0x22, 0xe0, 0x18, 0x38, 0x00, 0x42, 0xe0, 0x01, 0x78, 0x48, 0x00, -0x03, 0x70, 0xf0, 0x1d, 0x2c, 0x22, 0x30, 0x4a, 0x3d, 0x00, 0x40, 0xc0, 0x01, 0x70, 0x48, 0x00, -0x02, 0x28, 0x8d, 0x1c, 0x00, 0x20, 0xe0, 0x40, 0x88, 0x00, 0x42, 0xe0, 0x00, 0x2a, 0x19, 0xd0, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x70, 0x00, 0x00, 0x43, -0x10, 0x38, 0x00, 0x20, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x70, 0x01, 0x00, 0x42, -0x0b, 0x70, 0x00, 0x1c, 0x10, 0x10, 0x60, 0x10, 0x38, 0x0e, 0x73, 0x00, 0x00, 0x00, 0x04, 0x00, -0xd0, 0x20, 0x01, 0x46, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x30, 0x00, 0x00, 0x43, -0x11, 0x30, 0x08, 0x1c, 0x87, 0x35, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xf0, 0x00, 0x00, 0x42, -0x0a, 0x30, 0x04, 0x1c, 0x87, 0xb9, 0x11, 0x02, 0x8c, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0x11, 0x10, 0x01, 0x4a, 0x00, 0x21, 0x60, 0x28, 0x81, 0x0e, 0x68, 0x03, 0x50, 0xff, 0xff, 0x4a, -0x02, 0x48, 0x00, 0x48, 0x08, 0x39, 0x70, 0x00, 0x98, 0x0c, 0x72, 0xe3, 0x11, 0x00, 0x00, 0x90, -0xe9, 0x78, 0x00, 0x00, 0x00, 0x21, 0xe2, 0x08, 0x00, 0x00, 0xc8, 0xc4, 0x01, 0x00, 0x00, 0x84, -0x0b, 0x70, 0x3c, 0x1c, 0x0c, 0x20, 0x60, 0x00, 0x38, 0x0e, 0x73, 0x00, 0x00, 0x00, 0x04, 0x00, -0xe4, 0x50, 0x01, 0x48, 0x00, 0xe1, 0xff, 0xff, 0xff, 0xff, 0xff, 0x23, 0x05, 0xe4, 0xff, 0x6f, -0xea, 0x58, 0x01, 0x4c, 0x00, 0xe1, 0x91, 0x0a, 0xa4, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x78, 0xf5, 0xff, 0x5b, -0x10, 0x30, 0x00, 0x42, 0x07, 0x39, 0x00, 0x40, 0x01, 0x55, 0x00, 0x03, 0x40, 0x00, 0x00, 0x43, -0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x84, 0xe5, 0xff, 0x6f, -0x03, 0x00, 0x05, 0x40, 0x00, 0x20, 0x00, 0x38, 0x05, 0x80, 0x03, 0x00, 0x00, 0x00, 0x04, 0x00, -0x11, 0x10, 0x08, 0x00, 0x80, 0x05, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x38, 0xf5, 0xff, 0x48, -0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x40, 0x01, 0x55, 0x00, 0x00, 0x70, 0x0a, 0x00, 0x07, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, -0x1d, 0x30, 0x0c, 0x1c, 0x87, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0xd0, 0x30, 0x01, 0x46, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x20, 0xff, 0xff, 0x4b, -0x0a, 0x30, 0x10, 0x1c, 0x87, 0xb9, 0x91, 0x02, 0x8c, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xf8, 0xfb, 0xff, 0x5b, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xf0, 0xfe, 0xff, 0x48, -0x10, 0x38, 0x28, 0x20, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xe0, 0xfe, 0xff, 0x4a, -0x05, 0x58, 0x29, 0x00, 0x00, 0xe4, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x40, 0x85, 0xe6, 0xff, 0x6f, -0x11, 0x50, 0x05, 0x54, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x28, 0xfa, 0xff, 0x58, -0x11, 0x70, 0x20, 0x44, 0x00, 0x21, 0x70, 0x00, 0x20, 0x0c, 0x73, 0x03, 0xb0, 0xfe, 0xff, 0x4a, -0x0b, 0x70, 0x00, 0x1c, 0x10, 0x10, 0x60, 0x10, 0x38, 0x0e, 0x73, 0x00, 0x00, 0x00, 0x04, 0x00, -0xc0, 0x90, 0x80, 0x46, 0x00, 0xa1, 0x31, 0x81, 0x8c, 0x00, 0x42, 0x83, 0x82, 0x19, 0x01, 0x84, -0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xc3, 0x01, 0x10, 0x00, 0x68, -0xca, 0x70, 0x04, 0x1c, 0x00, 0xa0, 0xf1, 0x80, 0x38, 0x00, 0x42, 0x03, 0x82, 0x71, 0x00, 0x84, -0xc2, 0x88, 0x80, 0x1c, 0x00, 0xa1, 0xe1, 0x40, 0x39, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0xc9, 0x00, 0x48, 0x1e, 0x98, 0x91, 0xf1, 0x00, 0x8c, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0xc9, 0x00, 0x3c, 0x20, 0x98, 0x91, 0xf1, 0x00, 0x4c, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0xc9, 0x00, 0x3c, 0x22, 0x98, 0x91, 0xf1, 0x00, 0x50, 0x20, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0xd0, 0x00, 0x3c, 0x1c, 0x90, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x20, 0xfe, 0xff, 0x4b, -0x11, 0x30, 0x08, 0x1c, 0x87, 0x35, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x50, 0x00, 0x00, 0x42, -0x10, 0x30, 0x04, 0x1c, 0x87, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x00, 0xfe, 0xff, 0x4a, -0x05, 0x78, 0x00, 0x46, 0x18, 0xd0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xc0, 0x01, 0x10, 0x00, 0x68, -0x0b, 0x70, 0x04, 0x1c, 0x00, 0x20, 0xe0, 0x40, 0x38, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, -0x10, 0x00, 0x3c, 0x1c, 0x98, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xd0, 0xfd, 0xff, 0x48, -0x11, 0x30, 0x0c, 0x1c, 0x87, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x60, 0x00, 0x00, 0x43, -0x10, 0x30, 0x10, 0x1c, 0x87, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xb0, 0xfd, 0xff, 0x4a, -0x04, 0x50, 0x01, 0x46, 0x00, 0xe1, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x20, 0x05, 0x10, 0x00, 0x68, -0x0b, 0x58, 0x21, 0x00, 0x00, 0x24, 0x90, 0x0a, 0xa4, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, -0x11, 0x48, 0xb1, 0x52, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x88, 0xf8, 0xff, 0x58, -0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x70, 0xfd, 0xff, 0x48, -0x05, 0x78, 0x00, 0x46, 0x18, 0xd0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xc0, 0x01, 0x10, 0x00, 0x68, -0x1d, 0x70, 0x04, 0x1c, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, -0x11, 0x70, 0xe0, 0x1c, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x70, 0xff, 0xff, 0x48, -0x00, 0x20, 0x19, 0x0a, 0x80, 0x05, 0x10, 0x81, 0x88, 0x00, 0x42, 0xe0, 0x01, 0x12, 0x01, 0x84, -0x08, 0x80, 0x00, 0x40, 0x10, 0x10, 0x20, 0xc2, 0x88, 0x00, 0x42, 0x60, 0x04, 0x00, 0xc4, 0x00, -0x05, 0x28, 0x01, 0x40, 0x00, 0xe1, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xc0, 0x01, 0x10, 0x00, 0x68, -0x0a, 0x70, 0x04, 0x1c, 0x00, 0x20, 0x20, 0x01, 0x3a, 0x00, 0x42, 0x60, 0x82, 0x74, 0x00, 0x84, -0x04, 0x00, 0x3c, 0x1c, 0x98, 0x11, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x71, 0xe0, 0x83, 0x65, -0x0a, 0x78, 0x00, 0x22, 0x18, 0x10, 0x70, 0x70, 0x40, 0x0c, 0x71, 0x00, 0x00, 0x00, 0x04, 0x00, -0x09, 0x00, 0x3c, 0x24, 0x98, 0x11, 0xe0, 0x00, 0x88, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, -0x10, 0x00, 0x38, 0x26, 0x98, 0x11, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x50, 0x00, 0x00, 0x43, -0x11, 0x28, 0x01, 0x42, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x18, 0xfa, 0xff, 0x58, -0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x20, 0x01, 0x55, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, -0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x01, 0x10, 0x00, 0x68, -0x11, 0x40, 0x04, 0x10, 0x00, 0x20, 0x00, 0x18, 0x05, 0x80, 0x03, 0x80, 0x08, 0x00, 0x84, 0x00, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x78, 0xfb, 0xff, 0x58, -0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xc0, 0xff, 0xff, 0x48, -0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x4c, 0x6f, 0x61, 0x64, 0x65, 0x72, 0x3a, 0x20, 0x25, 0x73, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, -0x6f, 0x6e, 0x3a, 0x20, 0x25, 0x73, 0x0a, 0x00, 0x46, 0x69, 0x72, 0x6d, 0x77, 0x61, 0x72, 0x65, -0x3a, 0x20, 0x25, 0x73, 0x0a, 0x00, 0x00, 0x00, 0x45, 0x74, 0x68, 0x65, 0x72, 0x62, 0x6f, 0x6f, -0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x18, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x42, 0x4f, 0x4f, 0x54, 0x5f, 0x49, 0x4d, 0x41, 0x47, 0x45, 0x3d, 0x68, 0x65, 0x61, 0x64, 0x2e, -0x53, 0x20, 0x63, 0x6f, 0x6e, 0x73, 0x6f, 0x6c, 0x65, 0x3d, 0x74, 0x74, 0x79, 0x53, 0x30, 0x20, -0x69, 0x70, 0x3d, 0x64, 0x68, 0x63, 0x70, 0x20, 0x72, 0x6f, 0x6f, 0x74, 0x3d, 0x2f, 0x64, 0x65, -0x76, 0x2f, 0x6e, 0x66, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - diff --git a/util/mkelfImage/linux-ia64/convert.h b/util/mkelfImage/linux-ia64/convert.h deleted file mode 100644 index ff71385934..0000000000 --- a/util/mkelfImage/linux-ia64/convert.h +++ /dev/null @@ -1,17 +0,0 @@ -#define CMDLINE_MAX 1024 - -#ifdef ASSEMBLY -#define CONVERT_MAGIC 0xA5A5A5A5A5A5A5A5 -#else -#define CONVERT_MAGIC 0xA5A5A5A5A5A5A5A5ULL -#endif - -#ifndef ASSEMBLY -struct image_parameters { - uint64_t convert_magic; - uint64_t entry; - uint64_t initrd_start; - uint64_t initrd_size; - uint8_t cmdline[CMDLINE_MAX]; -}; -#endif diff --git a/util/mkelfImage/linux-ia64/convert.lds b/util/mkelfImage/linux-ia64/convert.lds deleted file mode 100644 index c729a5235f..0000000000 --- a/util/mkelfImage/linux-ia64/convert.lds +++ /dev/null @@ -1,36 +0,0 @@ -OUTPUT_FORMAT("elf64-ia64-little") -OUTPUT_ARCH(ia64) - -ENTRY(_start) -SECTIONS { - /* . = 0; */ - . = 0x0000000004400000; - .text : { - _text = . ; - *(.text) - *(.rodaa) - *(.rodata.*) - _etext = . ; - } - . = ALIGN(16); - __gp = . + 0x200000; - .sdata : { - _sdata = . ; - *(.got.plt) - *(.got) - *(.srodata) - *(.sdata) - _esdata = . ; - } - .data : { - _data = . ; - *(.data) - *(.data.*) - *(.trailer) - _edata = . ; - } - /DISCARD/ : { - *(.comment) - *(.note) - } -}
\ No newline at end of file diff --git a/util/mkelfImage/linux-ia64/convert_params.c b/util/mkelfImage/linux-ia64/convert_params.c deleted file mode 100644 index a58f4adf80..0000000000 --- a/util/mkelfImage/linux-ia64/convert_params.c +++ /dev/null @@ -1,334 +0,0 @@ -#include "stdint.h" -#include "limits.h" -#include <stdarg.h> -#include "elf.h" -#include "elf_boot.h" -#include "convert.h" - - -/* NOTE be very careful with static variables. No relocations are - * being performed so static variables with initialized pointers will - * point to the wrong locations, unless this file is loaded at just - * the right location. - */ -/* Data and functions in head.S */ -extern void uart_tx_byte(int c); - -static void putchar(int c) -{ - if (c == '\n') { - putchar('\r'); - } -#if 0 - uart_tx_byte(c); -#endif -} - -#define LONG_SHIFT ((int)((sizeof(unsigned long)*CHAR_BIT) - 4)) -#define INT_SHIFT ((int)((sizeof(unsigned int)*CHAR_BIT) - 4)) -#define SHRT_SHIFT ((int)((sizeof(unsigned short)*CHAR_BIT) - 4)) -#define CHAR_SHIFT ((int)((sizeof(unsigned char)*CHAR_BIT) - 4)) - -/************************************************************************** -PRINTF and friends - - Formats: - %x - 4 bytes int (8 hex digits, lower case) - %X - 4 bytes int (8 hex digits, upper case) - %lx - 8 bytes long (16 hex digits, lower case) - %lX - 8 bytes long (16 hex digits, upper case) - %hx - 2 bytes int (4 hex digits, lower case) - %hX - 2 bytes int (4 hex digits, upper case) - %hhx - 1 byte int (2 hex digits, lower case) - %hhX - 1 byte int (2 hex digits, upper case) - - optional # prefixes 0x or 0X - %d - decimal int - %c - char - %s - string - Note: width specification not supported -**************************************************************************/ -static void printf(const char *fmt, ...) -{ - va_list args; - char *p; - va_start(args, fmt); - for ( ; *fmt != '\0'; ++fmt) { - if (*fmt != '%') { - putchar(*fmt); - continue; - } - if (*++fmt == 's') { - for(p = va_arg(args, char *); *p != '\0'; p++) - putchar(*p); - } - else { /* Length of item is bounded */ - char tmp[40], *q = tmp; - int shift = INT_SHIFT; - if (*fmt == 'l') { - shift = LONG_SHIFT; - fmt++; - } - else if (*fmt == 'h') { - shift = SHRT_SHIFT; - fmt++; - if (*fmt == 'h') { - shift = CHAR_SHIFT; - fmt++; - } - } - - /* - * Before each format q points to tmp buffer - * After each format q points past end of item - */ - if ((*fmt | 0x20) == 'x') { - /* With x86 gcc, sizeof(long) == sizeof(int) */ - unsigned long h; - int ncase; - if (shift > INT_SHIFT) { - h = va_arg(args, unsigned long); - } else { - h = va_arg(args, unsigned int); - } - ncase = (*fmt & 0x20); - for ( ; shift >= 0; shift -= 4) - *q++ = "0123456789ABCDEF"[(h >> shift) & 0xF] | ncase; - } - else if (*fmt == 'd') { - char *r; - long i; - if (shift > INT_SHIFT) { - i = va_arg(args, long); - } else { - i = va_arg(args, int); - } - if (i < 0) { - *q++ = '-'; - i = -i; - } - p = q; /* save beginning of digits */ - do { - *q++ = '0' + (i % 10); - i /= 10; - } while (i); - /* reverse digits, stop in middle */ - r = q; /* don't alter q */ - while (--r > p) { - i = *r; - *r = *p; - *p++ = i; - } - } - else if (*fmt == 'c') - *q++ = va_arg(args, int); - else - *q++ = *fmt; - /* now output the saved string */ - for (p = tmp; p < q; ++p) - putchar(*p); - } - } - va_end(args); -} - -void *memcpy(void *vdest, void *vsrc, size_t size) -{ - unsigned char *dest = vdest, *src = vsrc; - size_t i; - for(i = 0; i < size; i++) { - *dest++ = *src++; - } - return dest; -} - -int memcmp(void *vs1, void *vs2, size_t size) -{ - unsigned char *s1 =vs1, *s2=vs2; - size_t i; - for(i = 0; i < size; i++, s1++, s2++) { - if (*s1 != *s2) - return *s1 - *s2; - } - return 0; - -} - -void strappend(char *dest, const char *src, size_t max) -{ - size_t len, i; - /* Walk to the end of the destination string */ - for(len = 0; len < max; len++) { - if (dest[len] == '\0') - break; - } - /* Walk through the source string and append it */ - for(i = 0; (i + len) < max; i++) { - if (src[i] == '\0') - break; - dest[len + i] = src[i]; - } - len = len + i; - /* Now null terminate the string */ - if (len >= max) { - len = max -1; - } - dest[len] = '\0'; -} - -static struct ia64_boot_param { - uint64_t command_line; /* physical address of command line arguments */ - uint64_t efi_systab; /* physical address of EFI system table */ - uint64_t efi_memmap; /* physical address of EFI memory map */ - uint64_t efi_memmap_size; /* size of EFI memory map */ - uint64_t efi_memdesc_size; /* size of an EFI memory map descriptor */ - uint32_t efi_memdesc_version; /* memory descriptor version */ - struct { - uint16_t num_cols; /* number of columns on console output device */ - uint16_t num_rows; /* number of rows on console output device */ - uint16_t orig_x; /* cursor's x position */ - uint16_t orig_y; /* cursor's y position */ - } console_info; - uint64_t fpswa; /* physical address of the fpswa interface */ - uint64_t initrd_start; - uint64_t initrd_size; -} bp = { 0, 0, 0, 0, 0, 0, { 80, 24, 0, 0 }, 0, 0, 0 }; - -static void append_command_line(char *arg) -{ - strappend((char *)bp.command_line, " ", CMDLINE_MAX); - strappend((char *)bp.command_line, arg, CMDLINE_MAX); -} - -static void convert_ia64_boot_params(struct ia64_boot_param *orig_bp) -{ - /* Copy the parameters I have no clue about */ - bp.efi_systab = orig_bp->efi_systab; - bp.efi_memmap = orig_bp->efi_memmap; - bp.efi_memmap_size = orig_bp->efi_memmap_size; - bp.efi_memdesc_size = orig_bp->efi_memdesc_size; - bp.efi_memdesc_version = orig_bp->efi_memdesc_version; - bp.console_info.num_cols = orig_bp->console_info.num_cols; - bp.console_info.num_rows = orig_bp->console_info.num_rows; - bp.console_info.orig_x = orig_bp->console_info.orig_x; - bp.console_info.orig_y = orig_bp->console_info.orig_y; - bp.fpswa = orig_bp->fpswa; - /* If a ramdisk was supplied and I didn't original have one, - * use it. - */ - if (orig_bp->initrd_size && (!bp.initrd_size)) { - bp.initrd_start = orig_bp->initrd_start; - bp.initrd_size = orig_bp->initrd_size; - } - /* If a command line was supplied append it */ - if (orig_bp->command_line) { - append_command_line((char *)(orig_bp->command_line)); - } -} - -static void convert_bhdr_params(Elf_Bhdr *bhdr) -{ - unsigned char *note, *end; - char *ldr_name, *ldr_version, *firmware; - - ldr_name = ldr_version = firmware = 0; - - note = ((char *)bhdr) + sizeof(*bhdr); - end = ((char *)bhdr) + bhdr->b_size; - while(note < end) { - Elf_Nhdr *hdr; - unsigned char *n_name, *n_desc, *next; - hdr = (Elf_Nhdr *)note; - n_name = note + sizeof(*hdr); - n_desc = n_name + ((hdr->n_namesz + 3) & ~3); - next = n_desc + ((hdr->n_descsz + 3) & ~3); - if (next > end) - break; -#if 0 - printf("n_type: %x n_name(%d): n_desc(%d): \n", - hdr->n_type, hdr->n_namesz, hdr->n_descsz); -#endif - - if (hdr->n_namesz == 0) { - switch(hdr->n_type) { - case EBN_FIRMWARE_TYPE: - firmware = n_desc; - break; - case EBN_BOOTLOADER_NAME: - ldr_name = n_desc; - break; - case EBN_BOOTLOADER_VERSION: - ldr_version = n_desc; - break; - case EBN_COMMAND_LINE: - append_command_line(n_desc); - break; - } - } - else if ((hdr->n_namesz == 10) && - (memcmp(n_name, "Etherboot", 10) == 0)) { - switch(hdr->n_type) { - case EB_IA64_SYSTAB: - { - uint64_t *systabp = (void *)n_desc; - bp.efi_systab = *systabp; - break; - } - case EB_IA64_FPSWA: - { - uint64_t *fpswap = (void *)n_desc; - bp.fpswa = *fpswap; - break; - } - case EB_IA64_CONINFO: - memcpy(&bp.console_info, n_desc, sizeof(bp.console_info)); - break; - case EB_IA64_MEMMAP: - { - struct efi_mem_map { - uint64_t map_size; - uint64_t map_key; - uint64_t descriptor_size; - uint64_t descriptor_version; - uint8_t map[40]; - } *map = (void *)n_desc; - bp.efi_memmap = (uint64_t)&map->map; - bp.efi_memmap_size = map->map_size; - bp.efi_memdesc_size = map->descriptor_size; - bp.efi_memdesc_version = map->descriptor_version; - break; - } - } - } - note = next; - } - if (ldr_name && ldr_version) { - printf("Loader: %s version: %s\n", - ldr_name, ldr_version); - } - if (firmware) { - printf("Firmware: %s\n", - firmware); - } -} - -void *convert_params(unsigned long arg1, unsigned long r28, - struct image_parameters *params) -{ - struct ia64_boot_param *orig_bp; - Elf_Bhdr *bhdr = (Elf_Bhdr*)arg1; - - /* handle the options I can easily deal with */ - bp.command_line = (unsigned long)¶ms->cmdline; - bp.initrd_start = params->initrd_start; - bp.initrd_size = params->initrd_size; - - orig_bp = (struct ia64_boot_param *)r28; - if (bhdr->b_signature == 0x0E1FB007) { - convert_bhdr_params(bhdr); - } - else { - convert_ia64_boot_params(orig_bp); - } - - return &bp; -} diff --git a/util/mkelfImage/linux-ia64/head.S b/util/mkelfImage/linux-ia64/head.S deleted file mode 100644 index df1b6827cb..0000000000 --- a/util/mkelfImage/linux-ia64/head.S +++ /dev/null @@ -1,235 +0,0 @@ -#define ASSEMBLY 1 - - .text - -#include "convert.h" - - .globl _start - .proc _start -_start: - alloc loc0=ar.pfs,1,2,3,0 /* in, local, out, rotating */ - mov loc1=rp - mov r14=ip /* Get the address of _start, I'm in the first bundle */ - movl r15=@gprel(_start) - ;; - sub gp=r14,r15 /* gp = _start - @gprel(_start), current value of gp */ - ;; - mov out0=in0 - mov out1=r28 - add out2=@gprel(params),gp - br.call.sptk.few rp=convert_params - - - mov r28=r8 - add r15=@gprel(entry), gp - ;; - ld8 r16=[r15] - ;; - mov b1=r16 - mov ar.pfs=loc0 - mov rp=loc1 - ;; - br.cond.sptk.few b1 - - .size _start, . - _start - .endp _start - - -#if 0 - -/* Base Address */ -#define UART_BASE 0x00000000f8030000 -#define UART_BAUD 9600 - -/* Data */ -#define UART_RBR 0x00 -#define UART_TBR 0x00 -/* Control */ -#define UART_IER 0x01 -#define UART_IIR 0x02 -#define UART_FCR 0x02 -#define UART_LCR 0x03 -#define UART_MCR 0x04 - -#define UART_DLL 0x00 -#define UART_DLM 0x01 -/* Status */ -#define UART_LSR 0x05 -#define UART_MSR 0x06 -#define UART_SCR 0x07 - -#define UART_PHYS_BASE (0x8000000000000000|UART_BASE) -#define UART_DIV (115200/UART_BAUD) -#define UART_DIV_LO (UART_DIV&0xFF) -#define UART_DIV_HI ((UART_DIV >> 8)&0xFF) - -#if ((115200%UART_BAUD) != 0) -#error Bad uart baud rate -#endif - -/* NOTE: As these are debugging functions, they do not consume any - * space on the register stack, and instead rely entirely on - * scratch registers for the registers they use. - */ -uart_init: - /* set the UART_BASE */ - movl r31=UART_PHYS_BASE - ;; - - /* disable interrupts */ - add r30=UART_IER,r31 - mov r29=0x00 - ;; - st1 [r30]=r29 - - /* enable fifos */ - add r30=UART_FCR,r31 - mov r29=0x01 - ;; - st1 [r30]=r29 - - /* Set Baud Rate Divisor to UART_BAUD */ - add r30=UART_LCR,r31 - mov r29=0x83 - ;; - st1 [r30]=r29 - - add r30=UART_DLL,r31 - mov r29=UART_DIV_LO - ;; - st1 [r30]=r29 - - add r30=UART_DLM,r31 - mov r29=UART_DIV_HI - ;; - st1 [r30]=r29 - - add r30=UART_LCR,r31 - mov r29=0x03 - ;; - st1 [r30]=r29 - - br.ret.sptk.few rp - - .proc uart_tx_byte - .globl uart_tx_byte -uart_tx_byte: - /* set the UART_PHYS_BASE */ - movl r31=UART_PHYS_BASE - ;; -__uart_tx_byte: - /* Wait until the UART can hold another byte */ - add r30=UART_LSR,r31 - ;; -9: ld1.acq.nta r29=[r30] - ;; - and r29=0x20,r29 - ;; - cmp.eq p63,p0=0,r29 -(p63) br.cond.sptk.few 9b - - /* Transmit the byte */ - add r30=UART_TBR,r31 - ;; - st1.rel.nta [r30]=r32 - ;; - - /* Wait until the UART is empty to be certain the byte is flushed */ - add r30=UART_LSR,r31 - ;; -9: ld1.acq.nta r29=[r30] - ;; - and r29=0x40,r29 - ;; - cmp.eq p63,p0=0,r29 -(p63) br.cond.sptk.few 9b - ;; - br.ret.sptk.few rp - .endp uart_tx_byte - -__uart_tx_hex_char: - cmp.ltu p62,p63=9,r32 - ;; -(p63) add r32=48,r32 /* digits*/ -(p62) add r32=55,r32 /* letters */ - br.cond.sptk.few __uart_tx_byte - -uart_tx_hex64: - /* set the UART_bASE */ - movl r31=UART_PHYS_BASE - /* skip r28 */ - mov r27=rp - mov r26=ar.pfs - mov r25=r32 - ;; - extr.u r32=r25,60,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,56,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,52,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,48,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,44,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,40,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,36,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,32,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,28,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,24,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,20,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,16,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,12,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,8,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,4,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - extr.u r32=r25,0,4 - br.call.sptk.few rp=__uart_tx_hex_char - ;; - mov ar.pfs = r26 - mov rp = r27 - ;; - br.ret.sptk.few rp -#endif - - .section ".trailer", "a" - /* Constants set at build time, these are at the very end of my image */ - .balign 16 - .global params -params: -convert_magic: - .quad CONVERT_MAGIC -entry: - .quad 0 -initrd_start: - .quad 0 -initrd_size: - .quad 0 -cmdline: - .asciz "BOOT_IMAGE=head.S console=ttyS0 ip=dhcp root=/dev/nfs" - .org cmdline + 1024, 0 -cmdline_end: diff --git a/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c b/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c deleted file mode 100644 index d4236cac99..0000000000 --- a/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c +++ /dev/null @@ -1,272 +0,0 @@ -#include <stdio.h> -#include <errno.h> -#include <stdlib.h> -#include <stdint.h> -#include <string.h> -#define _GNU_SOURCE -#include <getopt.h> -#include "elf.h" -#include "elf_boot.h" -#include "convert.h" -#include "mkelfImage.h" - -static unsigned char payload[] = { -#include "convert.bin.c" -}; - -char *linux_ia64_probe(char *kernel_buf, off_t kernel_size) -{ - Elf64_Ehdr *ehdr; - Elf64_Phdr *phdr; - int i; - int phdrs; - ehdr = (Elf64_Ehdr *)kernel_buf; - if ( - (ehdr->e_ident[EI_MAG0] != ELFMAG0) || - (ehdr->e_ident[EI_MAG1] != ELFMAG1) || - (ehdr->e_ident[EI_MAG2] != ELFMAG2) || - (ehdr->e_ident[EI_MAG3] != ELFMAG3)) { - return "No ELF signature found on kernel\n"; - } - if (ehdr->e_ident[EI_CLASS] != ELFCLASS64) { - return "Not a 64bit ELF kernel\n"; - } - if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { - return "Not a little endian ELF kernel\n"; - } - if (le16_to_cpu(ehdr->e_type) != ET_EXEC) { - return "Not an executable kernel\n"; - } - if (le16_to_cpu(ehdr->e_machine) != EM_IA_64) { - return "Not an ia64 kernel\n"; - } - if ( (ehdr->e_ident[EI_VERSION] != EV_CURRENT) || - (le32_to_cpu(ehdr->e_version) != EV_CURRENT)) { - return "Kernel not using ELF version 1.\n"; - } - if (le16_to_cpu(ehdr->e_phentsize) != sizeof(*phdr)) { - return "Kernel uses bad program header size.\n"; - } - phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff)); - phdrs = 0; - for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { - if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) - continue; - phdrs++; - } - if (phdrs == 0) { - return "No PT_LOAD segments!\n"; - } - return 0; -} - -struct kernel_info -{ - int phdrs; - char *kernel_buf; - Elf64_Ehdr *ehdr; - Elf64_Phdr *phdr; - uint64_t entry; - char *version; -}; - -static void parse_kernel(struct kernel_info *info, - char *kernel_buf, size_t kernel_size) -{ - Elf64_Ehdr *ehdr; - Elf64_Phdr *phdr; - int i; - int phdrs; - ehdr = (Elf64_Ehdr *)kernel_buf; - phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff)); - phdrs = 0; - for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { - if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) - continue; - phdrs++; - } - if (phdrs == 0) { - die("No PT_LOAD segments!\n"); - } - info->kernel_buf = kernel_buf; - info->ehdr = ehdr; - info->phdrs = phdrs; - info->phdr = phdr; - info->entry = le64_to_cpu(ehdr->e_entry); - info->version = "unknown"; -} - -static int populate_kernel_phdrs(struct kernel_info *info, struct memelfphdr *phdr) -{ - uint64_t paddr; - int i; - paddr = 0; - for(i = 0; i < info->phdrs; i++) { - Elf64_Phdr *hdr; - int j; - hdr = 0; - for(j = 0; j < le16_to_cpu(info->ehdr->e_phnum); j++) { - if (le16_to_cpu(info->phdr[j].p_type != PT_LOAD)) { - continue; - } - if (paddr > le64_to_cpu(info->phdr[j].p_paddr)) { - continue; - } - if (hdr && - le64_to_cpu(hdr->p_paddr) < - le64_to_cpu(info->phdr[j].p_paddr)) { - continue; - } - hdr = info->phdr + j; - } - if (!hdr) { - die("Expected %d phdrs found %d!", info->phdrs, i); - } - phdr[i].p_paddr = le64_to_cpu(hdr->p_paddr); - phdr[i].p_vaddr = le64_to_cpu(hdr->p_vaddr); - phdr[i].p_filesz = le64_to_cpu(hdr->p_filesz); - phdr[i].p_memsz = le64_to_cpu(hdr->p_memsz); - phdr[i].p_data = info->kernel_buf + le64_to_cpu(hdr->p_offset); - paddr = phdr[i].p_paddr + phdr[i].p_memsz; - } - return i; -} - - -void linux_ia64_usage(void) -{ - printf( - " --command-line=<string> Set the command line to <string>\n" - " --append=<string> Set the command line to <string>\n" - " --initrd=<filename> Set the initrd to <filename>\n" - " --ramdisk=<filename> Set the initrd to <filename>\n" - ); - return; -} - -#define OPT_CMDLINE OPT_MAX+0 -#define OPT_RAMDISK OPT_MAX+1 - -int linux_ia64_mkelf(int argc, char **argv, - struct memelfheader *ehdr, char *kernel_buf, off_t kernel_size) -{ - const char *ramdisk, *cmdline; - char *payload_buf, *ramdisk_buf; - off_t payload_size, ramdisk_size; - struct memelfphdr *phdr; - struct memelfnote *note; - struct kernel_info kinfo; - struct image_parameters *params; - int index; - - int opt; - static const struct option options[] = { - MKELF_OPTIONS - { "command-line", 1, 0, OPT_CMDLINE }, - { "append", 1, 0, OPT_CMDLINE }, - { "initrd", 1, 0, OPT_RAMDISK }, - { "ramdisk", 1, 0, OPT_RAMDISK }, - { 0 , 0, 0, 0 }, - }; - static const char short_options[] = "HV"; - - ramdisk = 0; - cmdline=""; - - while((opt = getopt_long(argc, argv, short_options, options, 0)) != -1) { - switch(opt) { - case '?': - error("Unknown option %s\n", argv[optind]); - break; - case OPT_RAMDISK: - ramdisk = optarg; - break; - case OPT_CMDLINE: - cmdline = optarg; - break; - default: - break; - } - } - ehdr->ei_class = ELFCLASS64; - ehdr->ei_data = ELFDATA2LSB; - ehdr->e_type = ET_EXEC; - ehdr->e_machine = EM_IA_64; - - /* locate the payload buffer */ - payload_buf = payload; - payload_size = sizeof(payload); - - /* slurp the input files */ - ramdisk_buf = slurp_file(ramdisk, &ramdisk_size); - - /* parse the kernel */ - parse_kernel(&kinfo, kernel_buf, kernel_size); - - /* Find the parameters */ - params = (void *)(payload_buf + (payload_size - sizeof(*params))); - - /* A sanity check against bad versions of binutils */ - if (params->convert_magic != CONVERT_MAGIC) { - die("Internal error convert_magic %16llx != %16llx\n", - (unsigned long long)(params->convert_magic), CONVERT_MAGIC); - } - - /* Copy the command line */ - strncpy(params->cmdline, cmdline, sizeof(params->cmdline)); - params->cmdline[sizeof(params->cmdline)-1]= '\0'; - - /* Add a program header for the note section */ - phdr = add_program_headers(ehdr, 2 + kinfo.phdrs + (ramdisk_size?1:0)); - - /* Fill in the program headers*/ - phdr[0].p_type = PT_NOTE; - - /* Fill in the kernel program headers */ - index = 1 + populate_kernel_phdrs(&kinfo, phdr + 1); - - /* Fill in the converter program header */ - phdr[index].p_paddr = roundup(phdr[index -1].p_paddr + phdr[index -1].p_memsz, 16); - phdr[index].p_vaddr = phdr[index].p_paddr; - phdr[index].p_filesz = payload_size; - phdr[index].p_memsz = payload_size; - phdr[index].p_data = payload_buf; - index++; - - /* Set the start location */ - params->entry = kinfo.entry; - ehdr->e_entry = phdr[index -1].p_paddr; - - - /* Fill in the ramdisk program header */ - params->initrd_start = params->initrd_size = 0; - if (ramdisk_size) { - phdr[index].p_paddr = roundup(phdr[index -1].p_paddr + phdr[index -1].p_memsz, 16); - phdr[index].p_vaddr = phdr[index].p_paddr; - phdr[index].p_filesz = ramdisk_size; - phdr[index].p_memsz = ramdisk_size; - phdr[index].p_data = ramdisk_buf; - params->initrd_start = phdr[index].p_paddr; - params->initrd_size = phdr[index].p_filesz; - index++; - } - - /* Compute the elf notes */ - note = add_notes(ehdr, 3); - note[0].n_type = EIN_PROGRAM_NAME; - note[0].n_name = "ELFBoot"; - note[0].n_desc = "Linux"; - note[0].n_descsz = strlen(note[0].n_desc)+1; - - note[1].n_type = EIN_PROGRAM_VERSION; - note[1].n_name = "ELFBoot"; - note[1].n_desc = kinfo.version; - note[1].n_descsz = strlen(note[1].n_desc)+1; - - note[2].n_type = EIN_PROGRAM_CHECKSUM; - note[2].n_name = "ELFBoot"; - note[2].n_desc = 0; - note[2].n_descsz = 2; - - return 0; -} diff --git a/util/mkelfImage/main/Makefile b/util/mkelfImage/main/Makefile deleted file mode 100644 index 403b0a4245..0000000000 --- a/util/mkelfImage/main/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -MKELF_OBJS=$(OBJDIR)/main/mkelfImage.o \ - $(OBJDIR)/linux-i386/mkelf-linux-i386.o \ - $(OBJDIR)/linux-ia64/mkelf-linux-ia64.o - -$(OBJDIR)/sbin/mkelfImage: $(MKELF_OBJS) $(DEPS) - $(MKDIR) -p $(@D) - $(HOST_CC) $(HOST_CFLAGS) $(MKELF_OBJS) -o $@ $(LIBS) - -$(OBJDIR)/main/mkelfImage.o: main/mkelfImage.c include/mkelfImage.h $(DEPS) - $(MKDIR) -p $(@D) - $(HOST_CC) $(HOST_CFLAGS) -c $< -o $@ - -$(OBJDIR)/man/man8/mkelfImage.8: main/mkelfImage.man - $(MKDIR) -p $(@D) - $(SED) \ - -e 's,^.TH MKELFIMAGE 8 "RELEASE_DATE" "VERSION"$$,.TH MKELFIMAGE 8 "$(RELEASE_DATE)" "$(VERSION)",' \ - $< > $@ - $(CP) $< $@ diff --git a/util/mkelfImage/main/mkelfImage.c b/util/mkelfImage/main/mkelfImage.c deleted file mode 100644 index 0dcc8c2fc1..0000000000 --- a/util/mkelfImage/main/mkelfImage.c +++ /dev/null @@ -1,663 +0,0 @@ -#include <stdarg.h> -#include <errno.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdio.h> -#include <getopt.h> -#ifdef HAVE_ZLIB_H -#include <zlib.h> -#endif -#include "elf.h" -#include "elf_boot.h" -#include "mkelfImage.h" - -static struct file_type file_type[] = { - { "linux-i386", linux_i386_probe, linux_i386_mkelf, linux_i386_usage }, - { "bzImage-i386", bzImage_i386_probe, linux_i386_mkelf, linux_i386_usage }, - { "vmlinux-i386", vmlinux_i386_probe, linux_i386_mkelf, linux_i386_usage }, - { "linux-ia64", linux_ia64_probe, linux_ia64_mkelf, linux_ia64_usage }, -}; -static const int file_types = sizeof(file_type)/sizeof(file_type[0]); - -void die(char *fmt, ...) -{ - va_list args; - va_start(args, fmt); - vfprintf(stderr, fmt, args); - va_end(args); - exit(1); -} - - - -/************************************************************************** -IPCHKSUM - Checksum IP Header -**************************************************************************/ -uint16_t ipchksum(const void *data, unsigned long length) -{ - unsigned long sum; - unsigned long i; - const uint8_t *ptr; - - /* In the most straight forward way possible, - * compute an ip style checksum. - */ - sum = 0; - ptr = data; - for(i = 0; i < length; i++) { - unsigned long value; - value = ptr[i]; - if (i & 1) { - value <<= 8; - } - /* Add the new value */ - sum += value; - /* Wrap around the carry */ - if (sum > 0xFFFF) { - sum = (sum + (sum >> 16)) & 0xFFFF; - } - } - return (~cpu_to_le16(sum)) & 0xFFFF; -} - -uint16_t add_ipchksums(unsigned long offset, uint16_t sum, uint16_t new) -{ - unsigned long checksum; - sum = ~sum & 0xFFFF; - new = ~new & 0xFFFF; - if (offset & 1) { - /* byte swap the sum if it came from an odd offset - * since the computation is endian independant this - * works. - */ - new = bswap_16(new); - } - checksum = sum + new; - if (checksum > 0xFFFF) { - checksum -= 0xFFFF; - } - return (~checksum) & 0xFFFF; -} - -void *xmalloc(size_t size, const char *name) -{ - void *buf; - buf = malloc(size); - if (!buf) { - die("Cannot malloc %ld bytes to hold %s: %s\n", - size + 0UL, name, strerror(errno)); - } - return buf; -} - -void *xrealloc(void *ptr, size_t size, const char *name) -{ - void *buf; - buf = realloc(ptr, size); - if (!buf) { - die("Cannot realloc %ld bytes to hold %s: %s\n", - size + 0UL, name, strerror(errno)); - } - return buf; -} - - -char *slurp_file(const char *filename, off_t *r_size) -{ - int fd; - char *buf; - off_t size, progress; - ssize_t result; - struct stat stats; - - - if (!filename) { - *r_size = 0; - return 0; - } - fd = open(filename, O_RDONLY); - if (fd < 0) { - die("Cannot open `%s': %s\n", - filename, strerror(errno)); - } - result = fstat(fd, &stats); - if (result < 0) { - die("Cannot stat: %s: %s\n", - filename, strerror(errno)); - } - size = stats.st_size; - *r_size = size; - buf = xmalloc(size, filename); - progress = 0; - while(progress < size) { - result = read(fd, buf + progress, size - progress); - if (result < 0) { - if ((errno == EINTR) || (errno == EAGAIN)) - continue; - die("read on %s of %ld bytes failed: %s\n", - filename, (size - progress)+ 0UL, strerror(errno)); - } - progress += result; - } - result = close(fd); - if (result < 0) { - die("Close of %s failed: %s\n", - filename, strerror(errno)); - } - return buf; -} - -#if HAVE_ZLIB_H -char *slurp_decompress_file(const char *filename, off_t *r_size) -{ - gzFile fp; - int errnum; - const char *msg; - char *buf; - off_t size, allocated; - ssize_t result; - - if (!filename) { - *r_size = 0; - return 0; - } - fp = gzopen(filename, "rb"); - if (fp == 0) { - msg = gzerror(fp, &errnum); - if (errnum == Z_ERRNO) { - msg = strerror(errno); - } - die("Cannot open `%s': %s\n", filename, msg); - } - size = 0; - allocated = 65536; - buf = xmalloc(allocated, filename); - do { - if (size == allocated) { - allocated <<= 1; - buf = xrealloc(buf, allocated, filename); - } - result = gzread(fp, buf + size, allocated - size); - if (result < 0) { - if ((errno == EINTR) || (errno == EAGAIN)) - continue; - - msg = gzerror(fp, &errnum); - if (errnum == Z_ERRNO) { - msg = strerror(errno); - } - die ("read on %s of %ld bytes failed: %s\n", - filename, (allocated - size) + 0UL, msg); - } - size += result; - } while(result > 0); - result = gzclose(fp); - if (result != Z_OK) { - msg = gzerror(fp, &errnum); - if (errnum == Z_ERRNO) { - msg = strerror(errno); - } - die ("Close of %s failed: %s\n", filename, msg); - } - *r_size = size; - return buf; -} -#else -char *slurp_decompress_file(const char *filename, off_t *r_size) -{ - return slurp_file(filename, r_size); -} -#endif - -struct memelfphdr *add_program_headers(struct memelfheader *ehdr, int count) -{ - struct memelfphdr *phdr; - int i; - ehdr->e_phnum = count; - ehdr->e_phdr = phdr = xmalloc(count *sizeof(*phdr), "Program headers"); - /* Set the default values */ - for(i = 0; i < count; i++) { - phdr[i].p_type = PT_LOAD; - phdr[i].p_flags = PF_R | PF_W | PF_X; - phdr[i].p_vaddr = 0; - phdr[i].p_paddr = 0; - phdr[i].p_filesz = 0; - phdr[i].p_memsz = 0; - phdr[i].p_data = 0; - } - return phdr; -} - -struct memelfnote *add_notes(struct memelfheader *ehdr, int count) -{ - struct memelfnote *notes; - ehdr->e_notenum = count; - ehdr->e_notes = notes = xmalloc(count *sizeof(*notes), "Notes"); - memset(notes, 0, count *sizeof(*notes)); - return notes; -} - -static int sizeof_notes(struct memelfnote *note, int notes) -{ - int size; - int i; - - size = 0; - for(i = 0; i < notes; i++) { - size += sizeof(Elf_Nhdr); - size += roundup(strlen(note[i].n_name)+1, 4); - size += roundup(note[i].n_descsz, 4); - } - return size; -} - -static uint16_t cpu_to_elf16(struct memelfheader *ehdr, uint16_t val) -{ - if (ehdr->ei_data == ELFDATA2LSB) { - return cpu_to_le16(val); - } - else if (ehdr->ei_data == ELFDATA2MSB) { - return cpu_to_be16(val); - } - die("Uknown elf layout in cpu_to_elf16"); - return 0; -} - -static uint32_t cpu_to_elf32(struct memelfheader *ehdr, uint32_t val) -{ - if (ehdr->ei_data == ELFDATA2LSB) { - return cpu_to_le32(val); - } - else if (ehdr->ei_data == ELFDATA2MSB) { - return cpu_to_be32(val); - } - die("Uknown elf layout in cpu_to_elf32"); - return 0; -} - -static uint64_t cpu_to_elf64(struct memelfheader *ehdr, uint64_t val) -{ - if (ehdr->ei_data == ELFDATA2LSB) { - return cpu_to_le64(val); - } - else if (ehdr->ei_data == ELFDATA2MSB) { - return cpu_to_be64(val); - } - die("Uknown elf layout in cpu_to_elf64"); - return 0; -} - -static void serialize_notes(char *buf, struct memelfheader *ehdr) -{ - struct Elf_Nhdr hdr; - struct memelfnote *note; - int notes; - size_t size, offset; - int i; - - /* Clear the buffer */ - note = ehdr->e_notes; - notes = ehdr->e_notenum; - size = sizeof_notes(note, notes); - memset(buf, 0, size); - - /* Write the Elf Notes */ - offset = 0; - for(i = 0; i < notes; i++) { - /* Compute the note header */ - size_t n_namesz; - n_namesz = strlen(note[i].n_name) +1; - hdr.n_namesz = cpu_to_elf32(ehdr, n_namesz); - hdr.n_descsz = cpu_to_elf32(ehdr, note[i].n_descsz); - hdr.n_type = cpu_to_elf32(ehdr, note[i].n_type); - - /* Copy the note into the buffer */ - memcpy(buf + offset, &hdr, sizeof(hdr)); - offset += sizeof(hdr); - memcpy(buf + offset, note[i].n_name, n_namesz); - offset += roundup(n_namesz, 4); - memcpy(buf + offset, note[i].n_desc, note[i].n_descsz); - offset += roundup(note[i].n_descsz, 4); - - } -} -static void serialize_ehdr(char *buf, struct memelfheader *ehdr) -{ - if (ehdr->ei_class == ELFCLASS32) { - Elf32_Ehdr *hdr = (Elf32_Ehdr *)buf; - hdr->e_ident[EI_MAG0] = ELFMAG0; - hdr->e_ident[EI_MAG1] = ELFMAG1; - hdr->e_ident[EI_MAG2] = ELFMAG2; - hdr->e_ident[EI_MAG3] = ELFMAG3; - hdr->e_ident[EI_CLASS] = ehdr->ei_class; - hdr->e_ident[EI_DATA] = ehdr->ei_data; - hdr->e_ident[EI_VERSION] = EV_CURRENT; - hdr->e_type = cpu_to_elf16(ehdr, ehdr->e_type); - hdr->e_machine = cpu_to_elf16(ehdr, ehdr->e_machine); - hdr->e_version = cpu_to_elf32(ehdr, EV_CURRENT); - hdr->e_entry = cpu_to_elf32(ehdr, ehdr->e_entry); - hdr->e_phoff = cpu_to_elf32(ehdr, sizeof(*hdr)); - hdr->e_shoff = cpu_to_elf32(ehdr, 0); - hdr->e_flags = cpu_to_elf32(ehdr, ehdr->e_flags); - hdr->e_ehsize = cpu_to_elf16(ehdr, sizeof(*hdr)); - hdr->e_phentsize = cpu_to_elf16(ehdr, sizeof(Elf32_Phdr)); - hdr->e_phnum = cpu_to_elf16(ehdr, ehdr->e_phnum); - hdr->e_shentsize = cpu_to_elf16(ehdr, 0); - hdr->e_shnum = cpu_to_elf16(ehdr, 0); - hdr->e_shstrndx = cpu_to_elf16(ehdr, 0); - } - else if (ehdr->ei_class == ELFCLASS64) { - Elf64_Ehdr *hdr = (Elf64_Ehdr *)buf; - hdr->e_ident[EI_MAG0] = ELFMAG0; - hdr->e_ident[EI_MAG1] = ELFMAG1; - hdr->e_ident[EI_MAG2] = ELFMAG2; - hdr->e_ident[EI_MAG3] = ELFMAG3; - hdr->e_ident[EI_CLASS] = ehdr->ei_class; - hdr->e_ident[EI_DATA] = ehdr->ei_data; - hdr->e_ident[EI_VERSION] = EV_CURRENT; - hdr->e_type = cpu_to_elf16(ehdr, ehdr->e_type); - hdr->e_machine = cpu_to_elf16(ehdr, ehdr->e_machine); - hdr->e_version = cpu_to_elf32(ehdr, EV_CURRENT); - hdr->e_entry = cpu_to_elf64(ehdr, ehdr->e_entry); - hdr->e_phoff = cpu_to_elf64(ehdr, sizeof(*hdr)); - hdr->e_shoff = cpu_to_elf64(ehdr, 0); - hdr->e_flags = cpu_to_elf32(ehdr, ehdr->e_flags); - hdr->e_ehsize = cpu_to_elf16(ehdr, sizeof(*hdr)); - hdr->e_phentsize = cpu_to_elf16(ehdr, sizeof(Elf64_Phdr)); - hdr->e_phnum = cpu_to_elf16(ehdr, ehdr->e_phnum); - hdr->e_shentsize = cpu_to_elf16(ehdr, 0); - hdr->e_shnum = cpu_to_elf16(ehdr, 0); - hdr->e_shstrndx = cpu_to_elf16(ehdr, 0); - } - else die("Uknown elf class: %x\n", ehdr->ei_class); -} -static void serialize_phdrs(char *buf, struct memelfheader *ehdr, size_t note_size) -{ - int i; - size_t offset, note_offset; - if (ehdr->ei_class == ELFCLASS32) { - Elf32_Phdr *phdr = (Elf32_Phdr *)buf; - note_offset = - sizeof(Elf32_Ehdr) + (sizeof(Elf32_Phdr)*ehdr->e_phnum); - offset = note_offset + note_size; - for(i = 0; i < ehdr->e_phnum; i++) { - struct memelfphdr *hdr = ehdr->e_phdr + i; - phdr[i].p_type = cpu_to_elf32(ehdr, hdr->p_type); - phdr[i].p_offset = cpu_to_elf32(ehdr, offset); - phdr[i].p_vaddr = cpu_to_elf32(ehdr, hdr->p_vaddr); - phdr[i].p_paddr = cpu_to_elf32(ehdr, hdr->p_paddr); - phdr[i].p_filesz = cpu_to_elf32(ehdr, hdr->p_filesz); - phdr[i].p_memsz = cpu_to_elf32(ehdr, hdr->p_memsz); - phdr[i].p_flags = cpu_to_elf32(ehdr, hdr->p_flags); - phdr[i].p_align = cpu_to_elf32(ehdr, 0); - if (phdr[i].p_type == PT_NOTE) { - phdr[i].p_filesz = cpu_to_elf32(ehdr, note_size); - phdr[i].p_memsz = cpu_to_elf32(ehdr, note_size); - phdr[i].p_offset = cpu_to_elf32(ehdr, note_offset); - } else { - offset += hdr->p_filesz; - } - } - } - else if (ehdr->ei_class == ELFCLASS64) { - Elf64_Phdr *phdr = (Elf64_Phdr *)buf; - note_offset = - sizeof(Elf64_Ehdr) + (sizeof(Elf64_Phdr)*ehdr->e_phnum); - offset = note_offset + note_size; - for(i = 0; i < ehdr->e_phnum; i++) { - struct memelfphdr *hdr = ehdr->e_phdr + i; - phdr[i].p_type = cpu_to_elf32(ehdr, hdr->p_type); - phdr[i].p_flags = cpu_to_elf32(ehdr, hdr->p_flags); - phdr[i].p_offset = cpu_to_elf64(ehdr, offset); - phdr[i].p_vaddr = cpu_to_elf64(ehdr, hdr->p_vaddr); - phdr[i].p_paddr = cpu_to_elf64(ehdr, hdr->p_paddr); - phdr[i].p_filesz = cpu_to_elf64(ehdr, hdr->p_filesz); - phdr[i].p_memsz = cpu_to_elf64(ehdr, hdr->p_memsz); - phdr[i].p_align = cpu_to_elf64(ehdr, 0); - if (phdr[i].p_type == PT_NOTE) { - phdr[i].p_filesz = cpu_to_elf64(ehdr, note_size); - phdr[i].p_memsz = cpu_to_elf64(ehdr, note_size); - phdr[i].p_offset = cpu_to_elf64(ehdr, note_offset); - } else { - offset += hdr->p_filesz; - } - } - } - else { - die("Unknwon elf class: %x\n", ehdr->ei_class); - } -} - -static void write_buf(int fd, char *buf, size_t size) -{ - size_t progress = 0; - ssize_t result; - while(progress < size) { - result = write(fd, buf + progress, size - progress); - if (result < 0) { - if ((errno == EAGAIN) || (errno == EINTR)) { - continue; - } - die ("write of %ld bytes failed: %s\n", - size - progress, strerror(errno)); - } - progress += result; - } -} -static void write_elf(struct memelfheader *ehdr, char *output) -{ - size_t ehdr_size; - size_t phdr_size; - size_t note_size; - size_t size; - uint16_t checksum; - size_t bytes; - char *buf; - int result, fd; - int i; - /* Prep for adding the checksum */ - for(i = 0; i < ehdr->e_notenum; i++) { - if ((memcmp(ehdr->e_notes[i].n_name, "ELFBoot", 8) == 0) && - (ehdr->e_notes[i].n_type == EIN_PROGRAM_CHECKSUM)) { - ehdr->e_notes[i].n_desc = &checksum; - ehdr->e_notes[i].n_descsz = 2; - } - } - /* Compute the sizes */ - ehdr_size = 0; - phdr_size = 0; - note_size = 0; - if (ehdr->e_notenum) { - note_size = sizeof_notes(ehdr->e_notes, ehdr->e_notenum); - } - if (ehdr->ei_class == ELFCLASS32) { - ehdr_size = sizeof(Elf32_Ehdr); - phdr_size = sizeof(Elf32_Phdr) * ehdr->e_phnum; - } - else if (ehdr->ei_class == ELFCLASS64) { - ehdr_size = sizeof(Elf64_Ehdr); - phdr_size = sizeof(Elf64_Phdr) * ehdr->e_phnum; - } - else { - die("Unknown elf class: %x\n", ehdr->ei_class); - } - - /* Allocate a buffer to temporarily hold the serialized forms */ - size = ehdr_size + phdr_size + note_size; - buf = xmalloc(size, "Elf Headers"); - memset(buf, 0, size); - serialize_ehdr(buf, ehdr); - serialize_phdrs(buf + ehdr_size, ehdr, note_size); - - /* Compute the checksum... */ - checksum = ipchksum(buf, ehdr_size + phdr_size); - bytes = ehdr_size + phdr_size; - for(i = 0; i < ehdr->e_phnum; i++) { - checksum = add_ipchksums(bytes, checksum, - ipchksum(ehdr->e_phdr[i].p_data, ehdr->e_phdr[i].p_filesz)); - bytes += ehdr->e_phdr[i].p_memsz; - } - - /* Compute the final form of the notes */ - serialize_notes(buf + ehdr_size + phdr_size, ehdr); - - /* Now write the elf image */ - fd = open(output, O_WRONLY | O_CREAT | O_EXCL, S_IRUSR | S_IRGRP | S_IROTH); - if (fd < 0) { - die("Cannot open ``%s'':%s\n", - output, strerror(errno)); - } - write_buf(fd, buf, size); - for(i = 0; i < ehdr->e_phnum; i++) { - write_buf(fd, ehdr->e_phdr[i].p_data, ehdr->e_phdr[i].p_filesz); - } - result = close(fd); - if (result < 0) { - die("Close on %s failed: %s\n", - output, strerror(errno)); - } -} - -static void version(void) -{ - printf("mkelfImage " VERSION " released " RELEASE_DATE "\n"); -} -void usage(void) -{ - int i; - version(); - printf( - "Usage: mkelfImage [OPTION]... <kernel> <elf_kernel>\n" - "Build an ELF bootable kernel image from a normal kernel image\n" - "\n" - " -h, --help Print this help.\n" - " -v, --version Print the version of kexec.\n" - " --kernel=<filename> Set the kernel to <filename>\n" - " --output=<filename> Output to <filename>\n" - " -t, --type=TYPE Specify the new kernel is of <type>.\n" - "\n" - "Supported kernel types: \n" - ); - for(i = 0; i < file_types; i++) { - printf("%s\n", file_type[i].name); - file_type[i].usage(); - } - printf("\n"); -} - -void error(char *fmt, ...) -{ - va_list args; - va_start(args, fmt); - vfprintf(stderr, fmt, args); - va_end(args); - usage(); - exit(1); -} - -int main(int argc, char **argv) -{ - int opt; - int fileind; - char *type, *kernel, *output; - off_t kernel_size; - char *kernel_buf; - int result; - int i; - struct memelfheader hdr; - - static const struct option options[] = { - MKELF_OPTIONS - { 0, 0, 0, 0 }, - }; - static const char short_options[] = MKELF_OPT_STR; - - memset(&hdr, 0, sizeof(hdr)); - kernel = 0; - output = 0; - - /* Get the default type from the program name */ - type = strrchr(argv[0], '/'); - if (!type) type = argv[0]; - if (memcmp(type, "mkelf-", 6) == 0) { - type = type + 6; - } else { - type = 0; - } - opterr = 0; /* Don't complain about unrecognized options here */ - while ((opt = getopt_long(argc, argv, short_options, options, 0)) != -1) { - switch(opt) { - case OPT_HELP: - usage(); - return 0; - case OPT_VERSION: - version(); - return 0; - case OPT_KERNEL: - kernel = optarg; - break; - case OPT_OUTPUT: - output = optarg; - break; - case OPT_TYPE: - type = optarg; - break; - default: - break; - } - } - fileind = optind; - - /* Reset getopt for the next pass */ - opterr = 1; - optind = 1; - - if (argc - fileind > 0) { - kernel = argv[fileind++]; - } - if (argc - fileind > 0) { - output = argv[fileind++]; - } - if (!kernel) { - error("No kernel specified!\n"); - } - if (!output) { - error("No output file specified!\n"); - } - if (argc - fileind > 0) { - error("%d extra options specified!\n", argc - fileind); - } - - /* slurp in the input kernel */ - kernel_buf = slurp_decompress_file(kernel, &kernel_size); - - /* Find/verify the kernel type */ - for(i = 0; i < file_types; i++) { - char *reason; - if (type && (strcmp(type, file_type[i].name) != 0)) { - continue; - } - reason = file_type[i].probe(kernel_buf, kernel_size); - if (reason == 0) { - break; - } - if (type) { - die("Not %s: %s\n", type, reason); - } - } - if (i == file_types) { - die("Can not determine the file type of %s\n", kernel); - } - result = file_type[i].mkelf(argc, argv, &hdr, kernel_buf, kernel_size); - if (result < 0) { - die("Cannot create %s result: %d\n", output, result); - } - /* open the output file */ - write_elf(&hdr, output); - return 0; -} diff --git a/util/mkelfImage/main/mkelfImage.man b/util/mkelfImage/main/mkelfImage.man deleted file mode 100644 index faf3613d47..0000000000 --- a/util/mkelfImage/main/mkelfImage.man +++ /dev/null @@ -1,166 +0,0 @@ -.\" Automatically generated by Pod::Man v1.3, Pod::Parser v1.13 -.\" But now manually maintained -.\" -.\" Standard preamble: -.\" ======================================================================== -.de Sh \" Subsection heading -.br -.if t .Sp -.ne 5 -.PP -\fB\\$1\fR -.PP -.. -.de Sp \" Vertical space (when we can't use .PP) -.if t .sp .5v -.if n .sp -.. -.de Vb \" Begin verbatim text -.ft CW -.nf -.ne \\$1 -.. -.de Ve \" End verbatim text -.ft R - -.fi -.. -.\" Set up some character translations and predefined strings. \*(-- will -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left -.\" double quote, and \*(R" will give a right double quote. | will give a -.\" real vertical bar. \*(C+ will give a nicer C++. Capital omega is used to -.\" do unbreakable dashes and therefore won't be available. \*(C` and \*(C' -.\" expand to `' in nroff, nothing in troff, for use with C<>. -.tr \(*W-|\(bv\*(Tr -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' -.ie n \{\ -. ds -- \(*W- -. ds PI pi -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch -. ds L" "" -. ds R" "" -. ds C` "" -. ds C' "" -'br\} -.el\{\ -. ds -- \|\(em\| -. ds PI \(*p -. ds L" `` -. ds R" '' -'br\} -.\" -.\" If the F register is turned on, we'll generate index entries on stderr for -.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index -.\" entries marked with X<> in POD. Of course, you'll have to process the -.\" output yourself in some meaningful fashion. -.if \nF \{\ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" -.. -. nr % 0 -. rr F -.\} -.\" -.\" For nroff, turn off justification. Always turn off hyphenation; it makes -.\" way too many mistakes in technical documents. -.hy 0 -.if n .na -.\" -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). -.\" Fear. Run. Save yourself. No user-serviceable parts. -. \" fudge factors for nroff and troff -.if n \{\ -. ds #H 0 -. ds #V .8m -. ds #F .3m -. ds #[ \f1 -. ds #] \fP -.\} -.if t \{\ -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) -. ds #V .6m -. ds #F 0 -. ds #[ \& -. ds #] \& -.\} -. \" simple accents for nroff and troff -.if n \{\ -. ds ' \& -. ds ` \& -. ds ^ \& -. ds , \& -. ds ~ ~ -. ds / -.\} -.if t \{\ -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' -.\} -. \" troff and (daisy-wheel) nroff accents -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] -.ds ae a\h'-(\w'a'u*4/10)'e -.ds Ae A\h'-(\w'A'u*4/10)'E -. \" corrections for vroff -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' -. \" for low resolution devices (crt and lpr) -.if \n(.H>23 .if \n(.V>19 \ -\{\ -. ds : e -. ds 8 ss -. ds o a -. ds d- d\h'-1'\(ga -. ds D- D\h'-1'\(hy -. ds th \o'bp' -. ds Th \o'LP' -. ds ae ae -. ds Ae AE -.\} -.rm #[ #] #H #V #F C -.\" ======================================================================== -.\" -.IX Title "MKELFIMAGE 8" -.TH MKELFIMAGE 8 "RELEASE_DATE" "VERSION" -.UC -.SH "NAME" -mkelfImage \- make an elf network bootable image for linux -.SH "SYNOPSIS" -.IX Header "SYNOPSIS" -\&\fBmkelfImage\fR [\-\-command\-line=\fIcommand line\fR] [\-\-kernel=\fIpath to vmlinux\fR] [\-\-ramdisk=\fIpath to ramdisk\fR] [\-\-output=\fIfile\fR] [\-\-ramdisk\-base=<start addr>] -.SH "DESCRIPTION" -.IX Header "DESCRIPTION" -\&\fBmkelfImage\fR is a program that makes a elf boot image for linux kernel -images. The image should work with any i386 multiboot compliant boot loader, -an \s-1ELF\s0 bootloader that passes no options, a loader compliant with the linuxBIOS -elf booting spec or with the linux kexec kernel patch. A key feature -here is that nothing relies upon \s-1BIOS\s0 calls, but they are made when -necessary. This is useful for systems running linuxbios. -.SH "BUGS" -.IX Header "BUGS" -Not all kernel parameters can be passed with the multiboot image format. -ip configuration is not automatically passed to a node. -The ramdisk base is hard coded to 8MB by default. -This man page need to be updated. -.SH "SEE ALSO" -.IX Header "SEE ALSO" -The kexec kernel patch. -LinuxBIOS. -Etherboot. -The multiboot standard. -.SH "COPYRIGHT" -.IX Header "COPYRIGHT" -mkelfImage is under the \s-1GNU\s0 Public License version 2 -.SH "AUTHOR" -.IX Header "AUTHOR" -Eric Biederman <ebiederman@lnxi.com> diff --git a/util/mkelfImage/mkelfImage.spec.in b/util/mkelfImage/mkelfImage.spec.in deleted file mode 100644 index 73abe6eef6..0000000000 --- a/util/mkelfImage/mkelfImage.spec.in +++ /dev/null @@ -1,50 +0,0 @@ -Summary: make an elf network bootable image for linux -Name: mkelfImage -Version: -Release: 0 -Copyright: GPL -Group: Development/Tools -Source0:%{name}-%{version}.tar.gz -Packager: Andrew Ip <aip@cwlinux.com> -BuildRoot: %{_tmppath}/%{name} - -%description -mkelfImage is a program that makes a elf boot image for linux kernel images. -The image should work with any i386 multiboot compliant boot loader, an ELF boot -loader that passes no options, a loader compliant with the linuxBIOS elf booting -spec or with the linux kexec kernel patch. A key feature here is that nothing -relies upon BIOS calls, but they are made when necessary. This is useful for -systems running linuxbios. - -%prep -%setup -q -n %{name}-%{version} - -%build -%configure -make - -%install -make install DESTDIR=${RPM_BUILD_ROOT} - -%files -%defattr(-,root,root) -%{_sbindir}/mkelfImage -%doc News -%doc COPYING -%doc AUTHORS -%{_mandir}/man8/mkelfImage.8.gz - -%changelog -* Mon Jan 13 2003 Eric Biederman <ebiederman@lnxi.com> -- Move the man page into section 8 as mkelfImage lives in sbin - -* Mon Aug 26 2002 Joshua Aune <luken@linuxnetworx.com> 1.15-1 -- New version -- Merge distro and Eric's spec file - -* Fri Aug 23 2002 Eric Biederman <ebiederman@lnxi.com> -- Simplified and incorporated into mkelfImage - -* Sat Aug 10 2002 Andrew Ip <aip@cwlinux.com> -- Initial release - diff --git a/util/mkelfImage/util/Makefile b/util/mkelfImage/util/Makefile deleted file mode 100644 index 67ec05be49..0000000000 --- a/util/mkelfImage/util/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -$(OBJDIR)/bin/bin-to-hex: util/bin-to-hex.c - $(MKDIR) -p $(@D) - $(HOST_CC) $(HOST_CFLAGS) $< -o $@ diff --git a/util/mkelfImage/util/bin-to-hex.c b/util/mkelfImage/util/bin-to-hex.c deleted file mode 100644 index af87e3ac0c..0000000000 --- a/util/mkelfImage/util/bin-to-hex.c +++ /dev/null @@ -1,20 +0,0 @@ -#include <stdio.h> - -int main(int argc, char **argv) -{ - int c; - int i; - i = 0; - while((c = getchar()) != EOF) { - if ((i % 16) != 0) { - putchar(' '); - } - printf("0x%02x,", c); - i++; - if ((i %16) == 0) { - putchar('\n'); - } - } - putchar('\n'); - return 0; -} |