summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/drivers/i2c/tpm/tis.c35
-rw-r--r--src/drivers/i2c/tpm/tpm.c42
-rw-r--r--src/drivers/i2c/tpm/tpm.h2
3 files changed, 46 insertions, 33 deletions
diff --git a/src/drivers/i2c/tpm/tis.c b/src/drivers/i2c/tpm/tis.c
index ce0de8953b..fea5145ad2 100644
--- a/src/drivers/i2c/tpm/tis.c
+++ b/src/drivers/i2c/tpm/tis.c
@@ -31,7 +31,6 @@ static struct tpm_chip g_chip CAR_GLOBAL;
#define TPM_CMD_COUNT_BYTE 2
#define TPM_CMD_ORDINAL_BYTE 6
-#define TPM_VALID_STATUS (1 << 7)
int tis_open(void)
{
@@ -69,38 +68,8 @@ int tis_close(void)
int tis_init(void)
{
- int bus = CONFIG_DRIVER_TPM_I2C_BUS;
- int chip = CONFIG_DRIVER_TPM_I2C_ADDR;
- struct stopwatch sw;
- uint8_t buf = 0;
- int ret;
- long sw_run_duration = 750;
-
- /*
- * Probe TPM. Check if the TPM_ACCESS register's ValidSts bit is set(1)
- * If the bit remains clear(0) then claim that init has failed.
- */
- stopwatch_init_msecs_expire(&sw, sw_run_duration);
- do {
- ret = i2c_readb(bus, chip, 0, &buf);
- if (!ret && (buf & TPM_VALID_STATUS)) {
- sw_run_duration = stopwatch_duration_msecs(&sw);
- break;
- }
- } while (!stopwatch_expired(&sw));
-
- printk(BIOS_INFO,
- "%s: ValidSts bit %s(%d) in TPM_ACCESS register after %ld ms\n",
- __func__, (buf & TPM_VALID_STATUS) ? "set" : "clear",
- (buf & TPM_VALID_STATUS) >> 7, sw_run_duration);
-
- /*
- * Claim failure if the ValidSts (bit 7) is clear.
- */
- if (!(buf & TPM_VALID_STATUS))
- return -1;
-
- return 0;
+ return tpm_vendor_probe(CONFIG_DRIVER_TPM_I2C_BUS,
+ CONFIG_DRIVER_TPM_I2C_ADDR);
}
static ssize_t tpm_transmit(const uint8_t *buf, size_t bufsiz)
diff --git a/src/drivers/i2c/tpm/tpm.c b/src/drivers/i2c/tpm/tpm.c
index 5e3c0c1bc8..f0f5ca8d6c 100644
--- a/src/drivers/i2c/tpm/tpm.c
+++ b/src/drivers/i2c/tpm/tpm.c
@@ -46,6 +46,7 @@
#define SLEEP_DURATION 60 /* in usec */
#define SLEEP_DURATION_LONG 210 /* in usec */
#define SLEEP_DURATION_SAFE 750 /* in usec */
+#define SLEEP_DURATION_PROBE_MS 1000 /* in msec */
/* max. number of iterations after I2C NAK for 'long' commands
* we need this especially for sending TPM_READY, since the cleanup after the
@@ -695,6 +696,47 @@ out:
/* Initialization of I2C TPM */
+int tpm_vendor_probe(unsigned bus, uint32_t addr)
+{
+ struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev);
+ struct stopwatch sw;
+ uint8_t buf = 0;
+ int ret;
+ long sw_run_duration = SLEEP_DURATION_PROBE_MS;
+
+ tpm_dev->chip_type = UNKNOWN;
+ tpm_dev->bus = bus;
+ tpm_dev->addr = addr;
+ tpm_dev->sleep_short = SLEEP_DURATION_SAFE;
+ tpm_dev->sleep_long = SLEEP_DURATION_SAFE * 2;
+
+ /*
+ * Probe TPM. Check if the TPM_ACCESS register's ValidSts bit is set(1)
+ * If the bit remains clear(0) then claim that init has failed.
+ */
+ stopwatch_init_msecs_expire(&sw, sw_run_duration);
+ do {
+ ret = iic_tpm_read(TPM_ACCESS(0), &buf, 1);
+ if (!ret && (buf & TPM_STS_VALID)) {
+ sw_run_duration = stopwatch_duration_msecs(&sw);
+ break;
+ }
+ } while (!stopwatch_expired(&sw));
+
+ printk(BIOS_INFO,
+ "%s: ValidSts bit %s(%d) in TPM_ACCESS register after %ld ms\n",
+ __func__, (buf & TPM_STS_VALID) ? "set" : "clear",
+ (buf & TPM_STS_VALID) >> 7, sw_run_duration);
+
+ /*
+ * Claim failure if the ValidSts (bit 7) is clear.
+ */
+ if (!(buf & TPM_STS_VALID))
+ return -1;
+
+ return 0;
+}
+
int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
{
struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev);
diff --git a/src/drivers/i2c/tpm/tpm.h b/src/drivers/i2c/tpm/tpm.h
index 7dfd59481d..ddf12a9e98 100644
--- a/src/drivers/i2c/tpm/tpm.h
+++ b/src/drivers/i2c/tpm/tpm.h
@@ -121,6 +121,8 @@ struct tpm_cmd_t {
/* ---------- Interface for TPM vendor ------------ */
+int tpm_vendor_probe(unsigned bus, uint32_t addr);
+
int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr);
void tpm_vendor_cleanup(struct tpm_chip *chip);