diff options
21 files changed, 1564 insertions, 0 deletions
diff --git a/src/mainboard/gigabyte/Kconfig b/src/mainboard/gigabyte/Kconfig index ff96a17687..c46b979ead 100644 --- a/src/mainboard/gigabyte/Kconfig +++ b/src/mainboard/gigabyte/Kconfig @@ -27,6 +27,8 @@ config BOARD_GIGABYTE_GA_6BXC bool "GA-6BXC" config BOARD_GIGABYTE_GA_6BXE bool "GA-6BXE" +config BOARD_GIGABYTE_GA_B75M_D3H + bool "GA-B75M-D3H" config BOARD_GIGABYTE_M57SLI bool "GA-M57SLI-S4" config BOARD_GIGABYTE_MA785GMT @@ -41,6 +43,7 @@ endchoice source "src/mainboard/gigabyte/ga_2761gxdk/Kconfig" source "src/mainboard/gigabyte/ga-6bxc/Kconfig" source "src/mainboard/gigabyte/ga-6bxe/Kconfig" +source "src/mainboard/gigabyte/ga-b75m-d3h/Kconfig" source "src/mainboard/gigabyte/m57sli/Kconfig" source "src/mainboard/gigabyte/ma785gmt/Kconfig" source "src/mainboard/gigabyte/ma785gm/Kconfig" diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/Kconfig b/src/mainboard/gigabyte/ga-b75m-d3h/Kconfig new file mode 100644 index 0000000000..b14dce5b57 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/Kconfig @@ -0,0 +1,76 @@ +if BOARD_GIGABYTE_GA_B75M_D3H + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select ARCH_X86 + select CPU_INTEL_SOCKET_LGA1155 + select NORTHBRIDGE_INTEL_IVYBRIDGE_NATIVE + select SOUTHBRIDGE_INTEL_C216 + select SUPERIO_ITE_IT8728F + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select DYNAMIC_CBMEM + select INTEL_INT15 + select VGA + select INTEL_EDID + select UDELAY_TSC + select EARLY_CBMEM_INIT + select SERIRQ_CONTINUOUS_MODE + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config DRAM_RESET_GATE_GPIO + int + default 25 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config MAINBOARD_DIR + string + default gigabyte/ga-b75m-d3h + +config MAINBOARD_PART_NUMBER + string + default "GA-B75M-D3H" + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 8 + +config VGA_BIOS_ID + string + default "8086,0162" + +config VGA_BIOS_FILE + string + default "pci8086,0162.rom" + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +config IFD_BIOS_SECTION + string + default "0x00600000:0x007fffff" + +config IFD_ME_SECTION + string + default "0x00001000:0x004fffff" + +endif # BOARD_GIGABYTE_GA_B75M_D3H diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/Makefile.inc b/src/mainboard/gigabyte/ga-b75m-d3h/Makefile.inc new file mode 100644 index 0000000000..a2efaddcef --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c +romstage-y += gpio.c diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/acpi/ec.asl b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/ec.asl new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/ec.asl diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/acpi/mainboard.asl b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/mainboard.asl new file mode 100644 index 0000000000..09cff9aa64 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/mainboard.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Scope (\_SB) +{ + Device (PWRB) + { + Name (_HID, EisaId("PNP0C0C")) + } +} diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/acpi/platform.asl b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/platform.asl new file mode 100644 index 0000000000..1448aeb027 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/platform.asl @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} + diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/acpi/superio.asl b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/superio.asl new file mode 100644 index 0000000000..753fc29dcc --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/superio.asl @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* mainboard configuration */ + +#define SIO_EC_ENABLE_PS2K // Enable PS/2 Keyboard +#define SIO_ENABLE_PS2M // Enable PS/2 Mouse + diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/acpi/thermal.asl b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/thermal.asl new file mode 100644 index 0000000000..f71611afcd --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/thermal.asl @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (\_TZ) +{ + ThermalZone (THRM) + { + Name (_TC1, 0x02) + Name (_TC2, 0x03) + + // Thermal zone polling frequency: 10 seconds + Name (_TZP, 100) + + // Thermal sampling period for passive cooling: 10 seconds + Name (_TSP, 100) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) + { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } + } +} diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/acpi/video.asl b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/video.asl new file mode 100644 index 0000000000..f87af3c192 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/acpi/video.asl @@ -0,0 +1 @@ +// Blank diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/acpi_tables.c b/src/mainboard/gigabyte/ga-b75m-d3h/acpi_tables.c new file mode 100644 index 0000000000..73b1c11f84 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/acpi_tables.c @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> + +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + gnvs->pcnt = dev_count_cpu(); + + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + // the lid is open by default. + gnvs->lids = 1; + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/board_info.txt b/src/mainboard/gigabyte/ga-b75m-d3h/board_info.txt new file mode 100644 index 0000000000..312f6ef947 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=4150#sp +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/cmos.default b/src/mainboard/gigabyte/ga-b75m-d3h/cmos.default new file mode 100644 index 0000000000..21d75e5ece --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/cmos.default @@ -0,0 +1,9 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +volume=0x3 +sata_mode=AHCI +hyper_threading=Enable diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/cmos.layout b/src/mainboard/gigabyte/ga-b75m-d3h/cmos.layout new file mode 100644 index 0000000000..7c8af49755 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/cmos.layout @@ -0,0 +1,152 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +400 8 h 0 volume + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +#411 10 r 0 unused +421 1 e 9 sata_mode +#422 2 r 0 unused + +# coreboot config options: cpu +424 1 e 2 hyper_threading +#425 7 r 0 unused + +# coreboot config options: northbridge +432 3 e 11 gfx_uma_size +#435 549 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +9 0 AHCI +9 1 IDE +11 0 32M +11 1 64M +11 2 96M +11 3 128M +11 4 160M +11 5 192M +11 6 224M + +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb b/src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb new file mode 100644 index 0000000000..20f88cb0bb --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb @@ -0,0 +1,117 @@ +chip northbridge/intel/sandybridge + device cpu_cluster 0 on + chip cpu/intel/socket_LGA1155 + device lapic 0 on end + end + chip cpu/intel/model_206ax + register "pstate_coord_type" = "0xfe" + register "c1_acpower" = "1" + register "c2_acpower" = "3" + register "c3_acpower" = "5" + register "c1_battery" = "1" + register "c2_battery" = "3" + register "c3_battery" = "5" + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + end + end + + device domain 0 on + subsystemid 0x1458 0x5000 inherit + device pci 00.0 on # host bridge + subsystemid 0x1458 0x5000 + end + device pci 01.0 off end # PCIe Bridge for discrete graphics + device pci 02.0 on # vga controller + subsystemid 0x1458 0xd000 + end + + chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH + + # GPI routing + register "alt_gp_smi_en" = "0x0000" + register "gen1_dec" = "0x003c0a01" + + # Set max SATA speed to 6.0 Gb/s + register "sata_port_map" = "0x3f" + register "sata_interface_speed_support" = "0x3" + + register "pcie_port_coalesce" = "0" + register "p_cnt_throttling_supported" = "0" + register "docking_supported" = "0" + register "sata_port_map" = "0x3f" + register "c2_latency" = "0x0065" + + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x1458 0x5007 + end + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x1458 0x5006 + end + device pci 1b.0 on # High Definition Audio + subsystemid 0x1458 0xa002 + end + device pci 1c.0 off end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 on # PCIe Port #5 + device pci 00.0 on # PCI 10ec:8168 + subsystemid 0x1458 0xe000 + end + end + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x1458 0x5006 + end + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + subsystemid 0x1458 0x5001 + chip superio/ite/it8728f + device pnp 2e.0 off end # FDC + device pnp 2e.1 on # Serial Port 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # EC + irq 0x70 = 9 + end + device pnp 2e.5 on # Keyboard + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + irq 0x70 = 0 + end + device pnp 2e.a off end # IR + end + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x1458 0xb005 + end + device pci 1f.3 on # SMBus + subsystemid 0x1458 0x5001 + end + device pci 1f.4 off end + device pci 1f.5 off end # SATA Controller 2 + end + end +end diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/dsdt.asl b/src/mainboard/gigabyte/ga-b75m-d3h/dsdt.asl new file mode 100644 index 0000000000..84a889aea7 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/dsdt.asl @@ -0,0 +1,24 @@ +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, // DSDT revision: ACPI v3.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20141018 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + #include <cpu/intel/model_206ax/acpi/cpu.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } +} diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/gpio.c b/src/mainboard/gigabyte/ga-b75m-d3h/gpio.c new file mode 100644 index 0000000000..791d7c7707 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/gpio.c @@ -0,0 +1,433 @@ +#include "southbridge/intel/bd82x6x/gpio.h" +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_NATIVE, + .gpio1 = GPIO_MODE_NATIVE, + .gpio2 = GPIO_MODE_NATIVE, + .gpio3 = GPIO_MODE_NATIVE, + .gpio4 = GPIO_MODE_NATIVE, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_NATIVE, + .gpio7 = GPIO_MODE_NATIVE, + .gpio8 = GPIO_MODE_NATIVE, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_NATIVE, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_NATIVE, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_NATIVE, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_NATIVE, + .gpio22 = GPIO_MODE_NATIVE, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_NATIVE, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_NATIVE, + .gpio28 = GPIO_MODE_NATIVE, + .gpio29 = GPIO_MODE_NATIVE, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_OUTPUT, + .gpio1 = GPIO_DIR_OUTPUT, + .gpio2 = GPIO_DIR_OUTPUT, + .gpio3 = GPIO_DIR_OUTPUT, + .gpio4 = GPIO_DIR_OUTPUT, + .gpio5 = GPIO_DIR_OUTPUT, + .gpio6 = GPIO_DIR_OUTPUT, + .gpio7 = GPIO_DIR_OUTPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_OUTPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_OUTPUT, + .gpio14 = GPIO_DIR_OUTPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_OUTPUT, + .gpio18 = GPIO_DIR_OUTPUT, + .gpio19 = GPIO_DIR_OUTPUT, + .gpio20 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_INPUT, + .gpio31 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_HIGH, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_HIGH, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_HIGH, + .gpio5 = GPIO_LEVEL_HIGH, + .gpio6 = GPIO_LEVEL_HIGH, + .gpio7 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_LOW, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_HIGH, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio19 = GPIO_LEVEL_LOW, + .gpio20 = GPIO_LEVEL_LOW, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio0 = GPIO_RESET_PWROK, + .gpio1 = GPIO_RESET_PWROK, + .gpio2 = GPIO_RESET_PWROK, + .gpio3 = GPIO_RESET_PWROK, + .gpio4 = GPIO_RESET_PWROK, + .gpio5 = GPIO_RESET_PWROK, + .gpio6 = GPIO_RESET_PWROK, + .gpio7 = GPIO_RESET_PWROK, + .gpio8 = GPIO_RESET_PWROK, + .gpio9 = GPIO_RESET_PWROK, + .gpio10 = GPIO_RESET_PWROK, + .gpio11 = GPIO_RESET_PWROK, + .gpio12 = GPIO_RESET_PWROK, + .gpio13 = GPIO_RESET_PWROK, + .gpio14 = GPIO_RESET_PWROK, + .gpio15 = GPIO_RESET_PWROK, + .gpio16 = GPIO_RESET_PWROK, + .gpio17 = GPIO_RESET_PWROK, + .gpio18 = GPIO_RESET_PWROK, + .gpio19 = GPIO_RESET_PWROK, + .gpio20 = GPIO_RESET_PWROK, + .gpio21 = GPIO_RESET_PWROK, + .gpio22 = GPIO_RESET_PWROK, + .gpio23 = GPIO_RESET_PWROK, + .gpio24 = GPIO_RESET_RSMRST, + .gpio25 = GPIO_RESET_PWROK, + .gpio26 = GPIO_RESET_PWROK, + .gpio27 = GPIO_RESET_PWROK, + .gpio28 = GPIO_RESET_PWROK, + .gpio29 = GPIO_RESET_PWROK, + .gpio30 = GPIO_RESET_PWROK, + .gpio31 = GPIO_RESET_PWROK, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio0 = GPIO_NO_INVERT, + .gpio1 = GPIO_NO_INVERT, + .gpio2 = GPIO_NO_INVERT, + .gpio3 = GPIO_NO_INVERT, + .gpio4 = GPIO_NO_INVERT, + .gpio5 = GPIO_NO_INVERT, + .gpio6 = GPIO_NO_INVERT, + .gpio7 = GPIO_NO_INVERT, + .gpio8 = GPIO_NO_INVERT, + .gpio9 = GPIO_NO_INVERT, + .gpio10 = GPIO_NO_INVERT, + .gpio11 = GPIO_NO_INVERT, + .gpio12 = GPIO_NO_INVERT, + .gpio13 = GPIO_INVERT, + .gpio14 = GPIO_NO_INVERT, + .gpio15 = GPIO_NO_INVERT, + .gpio16 = GPIO_NO_INVERT, + .gpio17 = GPIO_NO_INVERT, + .gpio18 = GPIO_NO_INVERT, + .gpio19 = GPIO_NO_INVERT, + .gpio20 = GPIO_NO_INVERT, + .gpio21 = GPIO_NO_INVERT, + .gpio22 = GPIO_NO_INVERT, + .gpio23 = GPIO_NO_INVERT, + .gpio24 = GPIO_NO_INVERT, + .gpio25 = GPIO_NO_INVERT, + .gpio26 = GPIO_NO_INVERT, + .gpio27 = GPIO_NO_INVERT, + .gpio28 = GPIO_NO_INVERT, + .gpio29 = GPIO_NO_INVERT, + .gpio30 = GPIO_NO_INVERT, + .gpio31 = GPIO_NO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { + .gpio0 = GPIO_NO_BLINK, + .gpio1 = GPIO_NO_BLINK, + .gpio2 = GPIO_NO_BLINK, + .gpio3 = GPIO_NO_BLINK, + .gpio4 = GPIO_NO_BLINK, + .gpio5 = GPIO_NO_BLINK, + .gpio6 = GPIO_NO_BLINK, + .gpio7 = GPIO_NO_BLINK, + .gpio8 = GPIO_NO_BLINK, + .gpio9 = GPIO_NO_BLINK, + .gpio10 = GPIO_NO_BLINK, + .gpio11 = GPIO_NO_BLINK, + .gpio12 = GPIO_NO_BLINK, + .gpio13 = GPIO_NO_BLINK, + .gpio14 = GPIO_NO_BLINK, + .gpio15 = GPIO_NO_BLINK, + .gpio16 = GPIO_NO_BLINK, + .gpio17 = GPIO_NO_BLINK, + .gpio18 = GPIO_BLINK, + .gpio19 = GPIO_NO_BLINK, + .gpio20 = GPIO_NO_BLINK, + .gpio21 = GPIO_NO_BLINK, + .gpio22 = GPIO_NO_BLINK, + .gpio23 = GPIO_NO_BLINK, + .gpio24 = GPIO_NO_BLINK, + .gpio25 = GPIO_NO_BLINK, + .gpio26 = GPIO_NO_BLINK, + .gpio27 = GPIO_NO_BLINK, + .gpio28 = GPIO_NO_BLINK, + .gpio29 = GPIO_NO_BLINK, + .gpio30 = GPIO_NO_BLINK, + .gpio31 = GPIO_NO_BLINK, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_INPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_INPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_LOW, + .gpio33 = GPIO_LEVEL_LOW, + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_HIGH, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_LOW, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_LOW, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_LOW, + .gpio54 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_LOW, + .gpio56 = GPIO_LEVEL_LOW, + .gpio57 = GPIO_LEVEL_HIGH, + .gpio58 = GPIO_LEVEL_HIGH, + .gpio59 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_LOW, + .gpio62 = GPIO_LEVEL_HIGH, + .gpio63 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { + .gpio32 = GPIO_RESET_PWROK, + .gpio33 = GPIO_RESET_PWROK, + .gpio34 = GPIO_RESET_PWROK, + .gpio35 = GPIO_RESET_PWROK, + .gpio36 = GPIO_RESET_PWROK, + .gpio37 = GPIO_RESET_PWROK, + .gpio38 = GPIO_RESET_PWROK, + .gpio39 = GPIO_RESET_PWROK, + .gpio40 = GPIO_RESET_PWROK, + .gpio41 = GPIO_RESET_PWROK, + .gpio42 = GPIO_RESET_PWROK, + .gpio43 = GPIO_RESET_PWROK, + .gpio44 = GPIO_RESET_PWROK, + .gpio45 = GPIO_RESET_PWROK, + .gpio46 = GPIO_RESET_PWROK, + .gpio47 = GPIO_RESET_PWROK, + .gpio48 = GPIO_RESET_PWROK, + .gpio49 = GPIO_RESET_PWROK, + .gpio50 = GPIO_RESET_PWROK, + .gpio51 = GPIO_RESET_PWROK, + .gpio52 = GPIO_RESET_PWROK, + .gpio53 = GPIO_RESET_PWROK, + .gpio54 = GPIO_RESET_PWROK, + .gpio55 = GPIO_RESET_PWROK, + .gpio56 = GPIO_RESET_PWROK, + .gpio57 = GPIO_RESET_PWROK, + .gpio58 = GPIO_RESET_PWROK, + .gpio59 = GPIO_RESET_PWROK, + .gpio60 = GPIO_RESET_PWROK, + .gpio61 = GPIO_RESET_PWROK, + .gpio62 = GPIO_RESET_PWROK, + .gpio63 = GPIO_RESET_PWROK, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_HIGH, + .gpio65 = GPIO_LEVEL_HIGH, + .gpio66 = GPIO_LEVEL_HIGH, + .gpio67 = GPIO_LEVEL_HIGH, + .gpio68 = GPIO_LEVEL_HIGH, + .gpio69 = GPIO_LEVEL_LOW, + .gpio70 = GPIO_LEVEL_LOW, + .gpio71 = GPIO_LEVEL_LOW, + .gpio72 = GPIO_LEVEL_HIGH, + .gpio73 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_HIGH, + .gpio75 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { + .gpio64 = GPIO_RESET_PWROK, + .gpio65 = GPIO_RESET_PWROK, + .gpio66 = GPIO_RESET_PWROK, + .gpio67 = GPIO_RESET_PWROK, + .gpio68 = GPIO_RESET_PWROK, + .gpio69 = GPIO_RESET_PWROK, + .gpio70 = GPIO_RESET_PWROK, + .gpio71 = GPIO_RESET_PWROK, + .gpio72 = GPIO_RESET_PWROK, + .gpio73 = GPIO_RESET_PWROK, + .gpio74 = GPIO_RESET_PWROK, + .gpio75 = GPIO_RESET_PWROK, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/hda_verb.c b/src/mainboard/gigabyte/ga-b75m-d3h/hda_verb.c new file mode 100644 index 0000000000..253ec08075 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/hda_verb.c @@ -0,0 +1,8 @@ +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/mainboard.c b/src/mainboard/gigabyte/ga-b75m-d3h/mainboard.c new file mode 100644 index 0000000000..0124baa179 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/mainboard.c @@ -0,0 +1,106 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011-2012 Google Inc. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <smbios.h> +#include <device/pci.h> +#include <cbfs.h> +#include <build.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + +const char *smbios_mainboard_bios_version(void) +{ + /* Satisfy thinkpad_acpi. */ + if (strlen(CONFIG_LOCALVERSION)) + return "CBET4000 " CONFIG_LOCALVERSION; + else + return "CBET4000 " COREBOOT_VERSION; +} + + + +static void mainboard_init(device_t dev) +{ + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00802005; + RCBA32(0x38c0) = 0x00000007; + RCBA32(0x2240) = 0x00330e71; + RCBA32(0x2244) = 0x003f0eb1; + RCBA32(0x2248) = 0x002102cd; + RCBA32(0x224c) = 0x00f60000; + RCBA32(0x2250) = 0x00020000; + RCBA32(0x2254) = 0x00e3004c; + RCBA32(0x2258) = 0x00e20bef; + RCBA32(0x2260) = 0x003304ed; + RCBA32(0x2278) = 0x001107c1; + RCBA32(0x227c) = 0x001d07e9; + RCBA32(0x2280) = 0x00e20000; + RCBA32(0x2284) = 0x00ee0000; + RCBA32(0x2288) = 0x005b05d3; + RCBA32(0x2318) = 0x04b8ff2e; + RCBA32(0x231c) = 0x03930f2e; + RCBA32(0x3808) = 0x005044a3; + RCBA32(0x3810) = 0x52410000; + RCBA32(0x3814) = 0x0000008a; + RCBA32(0x3818) = 0x00000006; + RCBA32(0x381c) = 0x0000072e; + RCBA32(0x3820) = 0x0000000a; + RCBA32(0x3824) = 0x00000123; + RCBA32(0x3828) = 0x00000009; + RCBA32(0x382c) = 0x00000001; + RCBA32(0x3834) = 0x0000061a; + RCBA32(0x3838) = 0x00000003; + RCBA32(0x383c) = 0x00000a76; + RCBA32(0x3840) = 0x00000004; + RCBA32(0x3844) = 0x0000e5e4; + RCBA32(0x3848) = 0x0000000e; +} + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_CRT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/mainboard_smi.c b/src/mainboard/gigabyte/ga-b75m-d3h/mainboard_smi.c new file mode 100644 index 0000000000..35702f0879 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/mainboard_smi.c @@ -0,0 +1,94 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <pc80/mc146818rtc.h> +#include <delay.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, + data); + + if (!pmbase) + return 0; + + switch (data) { + case APM_CNT_ACPI_ENABLE: + break; + case APM_CNT_ACPI_DISABLE: + break; + case APM_CNT_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + + default: + break; + } + return 0; +} diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/romstage.c b/src/mainboard/gigabyte/ga-b75m-d3h/romstage.c new file mode 100644 index 0000000000..6fea437c32 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/romstage.c @@ -0,0 +1,211 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Damien Zammit <damien@zamaudio.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define SUPERIO_BASE 0x2e +#define SUPERIO_DEV PNP_DEV(SUPERIO_BASE, 0) +#define SUPERIO_GPIO PNP_DEV(SUPERIO_BASE, IT8728F_GPIO) +#define SERIAL_DEV PNP_DEV(SUPERIO_BASE, 0x01) + +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <arch/acpi.h> +#include <console/console.h> +#include <superio/ite/it8728f/it8728f.h> +#include <superio/ite/common/ite.h> +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit_native.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include <arch/cpu.h> +#include <cpu/x86/msr.h> + +static void it8728f_b75md3h_disable_reboot(device_t dev) +{ + /* GPIO SIO settings */ + ite_reg_write(dev, 0xEF, 0x7E); // magic + + ite_reg_write(dev, 0x25, 0x40); // gpio pin function -> gp16 + ite_reg_write(dev, 0x27, 0x10); // gpio pin function -> gp34 + ite_reg_write(dev, 0x2c, 0x80); // smbus isolation on parallel port + ite_reg_write(dev, 0x62, 0x0a); // simple iobase 0xa00 + ite_reg_write(dev, 0x72, 0x20); // watchdog timeout clear! + ite_reg_write(dev, 0x73, 0x00); // watchdog timeout clear! + ite_reg_write(dev, 0xcb, 0x00); // simple io set4 direction -> in + ite_reg_write(dev, 0xe9, 0x27); // bus select disable + ite_reg_write(dev, 0xf0, 0x10); // ? + ite_reg_write(dev, 0xf1, 0x42); // ? + ite_reg_write(dev, 0xf6, 0x1c); // hardware monitor alert beep -> gp36(pin12) + + /* EC SIO settings */ + ite_reg_write(IT8728F_EC, 0xf1, 0xc0); + ite_reg_write(IT8728F_EC, 0xf6, 0xf0); + ite_reg_write(IT8728F_EC, 0xf9, 0x48); + ite_reg_write(IT8728F_EC, 0x60, 0x0a); + ite_reg_write(IT8728F_EC, 0x61, 0x30); + ite_reg_write(IT8728F_EC, 0x62, 0x0a); + ite_reg_write(IT8728F_EC, 0x63, 0x20); + ite_reg_write(IT8728F_EC, 0x30, 0x01); +} + +void rcba_config(void) +{ +/* + pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1); + pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE + 4, 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x44, 0x80); + + outw (inw (DEFAULT_PMBASE | 0x003c) | 2, DEFAULT_PMBASE | 0x003c); + + RCBA32(0x3500) = 0x2000035f; + RCBA32(0x3504) = 0x2000035f; + RCBA32(0x3508) = 0x2000035f; + RCBA32(0x350c) = 0x2000035f; + RCBA32(0x3510) = 0x2000035f; + RCBA32(0x3514) = 0x2000035f; + RCBA32(0x3518) = 0x2000035f; + RCBA32(0x351c) = 0x2000035f; + RCBA32(0x3520) = 0x2000035f; + RCBA32(0x3524) = 0x2000035f; + RCBA32(0x3528) = 0x2000035f; + RCBA32(0x352c) = 0x2000035f; + RCBA32(0x3530) = 0x2000035f; + RCBA32(0x3534) = 0x2000035f; + RCBA32(0x3560) = 0x024c8001; + RCBA32(0x3564) = 0x000024a3; + RCBA32(0x3568) = 0x00040002; + RCBA32(0x356c) = 0x01000050; + RCBA32(0x3570) = 0x02000662; + RCBA32(0x3574) = 0x18000f9f; + RCBA32(0x3578) = 0x1800ff4f; + RCBA32(0x357c) = 0x0001d530; + RCBA32(0x35a0) = 0xc0300c03; + RCBA32(0x35a4) = 0x00241803; + + pcie_write_config32 (PCI_DEV (0, 0x14, 0), 0xe4, 0x00000000); + + outw (0x0000, DEFAULT_PMBASE | 0x003c); + + RCBA32(0x2240) = 0x00330e71; + RCBA32(0x2244) = 0x003f0eb1; + RCBA32(0x2248) = 0x002102cd; + RCBA32(0x224c) = 0x00f60000; + RCBA32(0x2250) = 0x00020000; + RCBA32(0x2254) = 0x00e3004c; + RCBA32(0x2258) = 0x00e20bef; + RCBA32(0x2260) = 0x003304ed; + RCBA32(0x2278) = 0x001107c1; + RCBA32(0x227c) = 0x001d07e9; + RCBA32(0x2280) = 0x00e20000; + RCBA32(0x2284) = 0x00ee0000; + RCBA32(0x2288) = 0x005b05d3; + RCBA32(0x2318) = 0x04b8ff2e; + RCBA32(0x231c) = 0x03930f2e; +// RCBA32(0x3418) = 0x1fee1fe1; + RCBA32(0x3808) = 0x005044a3; + RCBA32(0x3810) = 0x52410000; + RCBA32(0x3814) = 0x0000008a; + RCBA32(0x3818) = 0x00000006; + RCBA32(0x381c) = 0x0000072e; + RCBA32(0x3820) = 0x0000000a; + RCBA32(0x3824) = 0x00000123; + RCBA32(0x3828) = 0x00000009; + RCBA32(0x382c) = 0x00000001; + RCBA32(0x3834) = 0x0000061a; + RCBA32(0x3838) = 0x00000003; + RCBA32(0x383c) = 0x00000a76; + RCBA32(0x3840) = 0x00000004; + RCBA32(0x3844) = 0x0000e5e4; + RCBA32(0x3848) = 0x0000000e; +*/ + /* Disable unused devices (board specific) */ + RCBA32(FD) = 0x17ee1fe1; + + /* Enable HECI */ + RCBA32(FD2) &= ~0x2; +} + +void pch_enable_lpc(void) +{ + /* + * Enable: + * EC Decode Range PortA30/A20 + * SuperIO Port2E/2F + * PS/2 Keyboard/Mouse Port60/64 + * FDD Port3F0h-3F5h and Port3F7h + */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, KBC_LPC_EN | MC_LPC_EN | + CNF1_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN); + + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x3c0a01); + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); + + pci_write_config32(PCH_LPC_DEV, 0xac, 0x10000); + + /* Initialize SuperIO */ + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + it8728f_b75md3h_disable_reboot(SUPERIO_GPIO); +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 5, 0 }, + { 1, 5, 0 }, + { 1, 5, 1 }, + { 1, 5, 1 }, + { 1, 5, 2 }, + { 1, 5, 2 }, + { 1, 5, 3 }, + { 1, 5, 3 }, + { 1, 5, 4 }, + { 1, 5, 4 }, + { 1, 5, 6 }, + { 1, 5, 5 }, + { 1, 5, 5 }, + { 1, 5, 6 }, +}; + +void mainboard_get_spd(spd_raw_data *spd) { + read_spd (&spd[0], 0x50); + read_spd (&spd[1], 0x51); + read_spd (&spd[2], 0x52); + read_spd (&spd[3], 0x53); +} + +#if 0 +static void dmi_config(void) +{ + DMIBAR32(0x0218) = 0x06aa0b0c; + DMIBAR32(0x021c) = 0x0b0d0b0d; + DMIBAR32(0x0300) = 0x0011028d; + DMIBAR32(0x0304) = 0x002102cd; + DMIBAR32(0x030c) = 0x007d004b; + DMIBAR32(0x0310) = 0x007e004c; + DMIBAR32(0x0318) = 0x002304ad; + DMIBAR32(0x031c) = 0x003304ed; + DMIBAR32(0x03b8) = 0x005c05a4; + DMIBAR32(0x03bc) = 0x006c05e4; + DMIBAR32(0x0530) = 0x41d3b000; + DMIBAR32(0x0534) = 0x00019f80; + DMIBAR32(0x0ba4) = 0x0000000d; + DMIBAR32(0x0d80) = 0x1c9cfc0b; + DMIBAR32(0x0e1c) = 0x20000000; + DMIBAR32(0x0e2c) = 0x20000000; +} +#endif diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/thermal.h b/src/mainboard/gigabyte/ga-b75m-d3h/thermal.h new file mode 100644 index 0000000000..ed08c8a2d1 --- /dev/null +++ b/src/mainboard/gigabyte/ga-b75m-d3h/thermal.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef GAB75MD3H_THERMAL_H +#define GAB75MD3H_THERMAL_H + + /* Temperature which OS will shutdown at */ + #define CRITICAL_TEMPERATURE 100 + + /* Temperature which OS will throttle CPU */ + #define PASSIVE_TEMPERATURE 90 + +#endif |