diff options
| -rw-r--r-- | src/mainboard/google/hatch/variants/genesis/gpio.c | 10 | ||||
| -rw-r--r-- | src/mainboard/google/hatch/variants/genesis/overridetree.cb | 76 |
2 files changed, 74 insertions, 12 deletions
diff --git a/src/mainboard/google/hatch/variants/genesis/gpio.c b/src/mainboard/google/hatch/variants/genesis/gpio.c index 5a911fc4f9..a095da1e11 100644 --- a/src/mainboard/google/hatch/variants/genesis/gpio.c +++ b/src/mainboard/google/hatch/variants/genesis/gpio.c @@ -14,6 +14,16 @@ static const struct pad_config gpio_table[] = { /* B5 : LAN_CLKREQ_ODL */ PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + /* B6 : M2_SSD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), + /* B7 : M2_TPU0_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), + /* B8 : CLK_PCIE_REQ3 (not connected) */ + PAD_NC(GPP_B8, NONE), + /* B9 : M2_TPU1_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), + /* B10 : M2_WLAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), /* C0 : SMBCLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), diff --git a/src/mainboard/google/hatch/variants/genesis/overridetree.cb b/src/mainboard/google/hatch/variants/genesis/overridetree.cb index 835a8aae3a..1c05f52817 100644 --- a/src/mainboard/google/hatch/variants/genesis/overridetree.cb +++ b/src/mainboard/google/hatch/variants/genesis/overridetree.cb @@ -185,13 +185,51 @@ chip soc/intel/cannonlake # PCIe port 7 for LAN register "PcieRpEnable[6]" = "1" register "PcieRpLtrEnable[6]" = "1" - # PCIe port 11 (x2) for NVMe hybrid storage devices - register "PcieRpEnable[10]" = "1" - register "PcieRpLtrEnable[10]" = "1" # Uses CLK SRC 0 register "PcieClkSrcUsage[0]" = "6" register "PcieClkSrcClkReq[0]" = "0" + # PCIe port 8 for WLAN + register "PcieRpEnable[7]" = "1" + register "PcieRpLtrEnable[7]" = "1" + # Uses CLK SRC 5 + register "PcieClkSrcUsage[5]" = "7" + register "PcieClkSrcClkReq[5]" = "5" + + # PCIe port 9 for TPU #0 + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + # RP 9 uses CLK SRC 2 + register "PcieClkSrcUsage[2]" = "8" + register "PcieClkSrcClkReq[2]" = "2" + + # PCIe port 10 for TPU #1 + register "PcieRpEnable[9]" = "1" + register "PcieRpLtrEnable[9]" = "1" + # RP 10 uses CLK SRC 4 + register "PcieClkSrcUsage[4]" = "9" + register "PcieClkSrcClkReq[4]" = "4" + + # PCIe port 11 (x2) for NVMe hybrid storage devices + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # RP 11 uses CLK SRC 1 + register "PcieClkSrcUsage[1]" = "10" + register "PcieClkSrcClkReq[1]" = "1" + # Disable the remaining port 12 + register "PcieRpEnable[11]" = "0" + + # PCIe port 13 for i350 NIC (x4) + register "PcieRpEnable[12]" = "1" + register "PcieRpLtrEnable[12]" = "1" + # RP 13 uses CLK SRC 3 + register "PcieClkSrcUsage[3]" = "12" + # RP 13 does not use a source clock request line + # Disable the remaining ports 14-16 + register "PcieRpEnable[13]" = "0" + register "PcieRpEnable[14]" = "0" + register "PcieRpEnable[15]" = "0" + # GPIO for SD card detect register "sdcard_cd_gpio" = "vSD3_CD_B" @@ -333,15 +371,13 @@ chip soc/intel/cannonlake device usb 3.3 on end end chip drivers/usb/acpi - register "desc" = ""USB3 Type-A Rear Left"" - register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(1, 0)" - device usb 3.4 on end + # USB3 Port 5 is not populated + device usb 3.4 off end end chip drivers/usb/acpi - register "desc" = ""USB3 Type-A Rear Middle"" + register "desc" = ""USB3 M.2 HDMI-to-USB"" register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(1, 1)" + register "group" = "ACPI_PLD_GROUP(2, 0)" device usb 3.5 on end end end @@ -383,8 +419,8 @@ chip soc/intel/cannonlake end end #I2C #4 device pci 1a.0 on end # eMMC - device pci 1c.6 on - chip drivers/net + device pci 1c.6 on # PCI Express Port 7 (LAN) + chip drivers/net # RTL8111H Ethernet NIC register "customized_leds" = "0x05af" register "wake" = "GPE0_DW1_07" # GPP_C7 register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" @@ -394,8 +430,24 @@ chip soc/intel/cannonlake register "device_index" = "0" device pci 00.0 on end end - end # RTL8111H Ethernet NIC + end + device pci 1c.7 on # PCI Express Port 8 (WLAN) + register "PcieRpSlotImplemented[7]" = "1" # M.2 Slot + end + device pci 1d.0 on # PCI Express Port 9 (TPU) + register "PcieRpSlotImplemented[8]" = "1" # M.2 Slot + end + device pci 1d.1 on # PCI Express Port 10 (TPU) + register "PcieRpSlotImplemented[9]" = "1" # M.2 Slot + end device pci 1d.2 on end # PCI Express Port 11 (X2 NVMe) + device pci 1d.3 off end # PCI Express Port 12 (non-root) + device pci 1d.4 on # PCI Express Port 13 (X4 i350 NIC) + register "PcieRpSlotImplemented[12]" = "0" # Built-in + end + device pci 1d.5 off end # PCI Express Port 14 (non-root) + device pci 1d.6 off end # PCI Express Port 15 (non-root) + device pci 1d.7 off end # PCI Express Port 16 (non-root) device pci 1e.3 off end # GSPI #1 end |