summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/mainboard/Iwill/DK8S2/auto.c16
-rw-r--r--src/mainboard/Iwill/DK8X/auto.c15
-rw-r--r--src/mainboard/amd/quartet/auto.c17
-rw-r--r--src/mainboard/amd/serenade/auto.c16
-rw-r--r--src/mainboard/amd/solo/auto.c20
-rw-r--r--src/mainboard/arima/hdama/auto.c24
-rw-r--r--src/mainboard/ibm/e325/auto.c17
-rw-r--r--src/mainboard/ibm/e326/auto.c17
-rw-r--r--src/mainboard/island/aruma/auto.c55
-rw-r--r--src/mainboard/newisys/khepri/auto.c17
-rw-r--r--src/mainboard/tyan/s2875/auto.c50
-rw-r--r--src/mainboard/tyan/s2880/auto.c45
-rw-r--r--src/mainboard/tyan/s2881/auto.c43
-rw-r--r--src/mainboard/tyan/s2882/auto.c45
-rw-r--r--src/mainboard/tyan/s2885/auto.c77
-rw-r--r--src/mainboard/tyan/s2891/auto.c53
-rw-r--r--src/mainboard/tyan/s2892/auto.c54
-rw-r--r--src/mainboard/tyan/s2895/auto.c82
-rw-r--r--src/mainboard/tyan/s4880/auto.c50
-rw-r--r--src/mainboard/tyan/s4882/auto.c74
20 files changed, 68 insertions, 719 deletions
diff --git a/src/mainboard/Iwill/DK8S2/auto.c b/src/mainboard/Iwill/DK8S2/auto.c
index 6c4e8373e5..b771b3f0f1 100644
--- a/src/mainboard/Iwill/DK8S2/auto.c
+++ b/src/mainboard/Iwill/DK8S2/auto.c
@@ -23,6 +23,8 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
+
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -161,19 +163,7 @@ static void main(unsigned long bist)
unsigned nodeid;
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
-
- /* Has this cpu already booted? */
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
diff --git a/src/mainboard/Iwill/DK8X/auto.c b/src/mainboard/Iwill/DK8X/auto.c
index 8e83c3093d..1552324410 100644
--- a/src/mainboard/Iwill/DK8X/auto.c
+++ b/src/mainboard/Iwill/DK8X/auto.c
@@ -20,9 +20,11 @@
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "northbridge/amd/amdk8/cpu_rev.c"
+
#include "superio/NSC/pc87360/pc87360_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
@@ -163,18 +165,7 @@ static void main(unsigned long bist)
unsigned nodeid;
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
- /* Has this cpu already booted? */
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c
index 638d09b861..6ab2ea8208 100644
--- a/src/mainboard/amd/quartet/auto.c
+++ b/src/mainboard/amd/quartet/auto.c
@@ -26,6 +26,7 @@
#include "superio/NSC/pc87360/pc87360_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
@@ -212,21 +213,7 @@ static void main(unsigned long bist)
unsigned nodeid;
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
- nodeid = lapicid() & 0xf;
- /* Has this cpu already booted? */
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
-
- distinguish_cpu_resets(nodeid);
-
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
diff --git a/src/mainboard/amd/serenade/auto.c b/src/mainboard/amd/serenade/auto.c
index 9a9de15b49..f1104bdb86 100644
--- a/src/mainboard/amd/serenade/auto.c
+++ b/src/mainboard/amd/serenade/auto.c
@@ -25,6 +25,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -163,20 +164,7 @@ static void main(unsigned long bist)
int needs_reset;
unsigned nodeid;
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
- nodeid = lapicid() & 0xf;
- /* Has this cpu already booted? */
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
-
- distinguish_cpu_resets(nodeid);
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c
index fff604dc35..a9d2404f69 100644
--- a/src/mainboard/amd/solo/auto.c
+++ b/src/mainboard/amd/solo/auto.c
@@ -23,6 +23,7 @@
#include "superio/NSC/pc87360/pc87360_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
@@ -111,24 +112,7 @@ static void main(unsigned long bist)
unsigned nodeid;
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
- enable_lapic();
- init_timer();
-
- nodeid = lapicid() & 0xf;
-
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
-
- distinguish_cpu_resets(nodeid);
-
- if (!boot_cpu()) {
- /* This LinuxBIOS image is built for UP only */
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c
index 7790b3ea50..c493e02cc0 100644
--- a/src/mainboard/arima/hdama/auto.c
+++ b/src/mainboard/arima/hdama/auto.c
@@ -22,6 +22,7 @@
#include "superio/NSC/pc87360/pc87360_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
@@ -135,7 +136,7 @@ static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
};
if (maxnodes > 2) {
- print_debug("this mainboard is only designed for 2 cpus\r\n");
+ print_spew("this mainboard is only designed for 2 cpus\r\n");
maxnodes = 2;
}
@@ -165,6 +166,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
+
+
static void main(unsigned long bist)
{
static const struct mem_controller cpu[] = {
@@ -194,21 +197,7 @@ static void main(unsigned long bist)
int needs_reset;
if (bist == 0) {
- unsigned nodeid;
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
- nodeid = lapicid() & 0xf;
-
- /* Has this cpu already booted? */
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -235,12 +224,13 @@ static void main(unsigned long bist)
memreset_setup();
sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
-
+
#if 0
dump_pci_devices();
#endif
#if 0
dump_pci_device(PCI_DEV(0, 0x18, 2));
+ dump_pci_device(PCI_DEV(0, 0x18, 3));
#endif
#if 0
diff --git a/src/mainboard/ibm/e325/auto.c b/src/mainboard/ibm/e325/auto.c
index b1c9e772d5..13a1cae52b 100644
--- a/src/mainboard/ibm/e325/auto.c
+++ b/src/mainboard/ibm/e325/auto.c
@@ -25,6 +25,7 @@
#include "superio/NSC/pc87366/pc87366_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1)
@@ -161,21 +162,7 @@ static void main(unsigned long bist)
unsigned nodeid;
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
-
- nodeid = lapicid() & 0xf;
-
- /* Has this cpu already booted? */
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE);
diff --git a/src/mainboard/ibm/e326/auto.c b/src/mainboard/ibm/e326/auto.c
index 1f3aef1c56..e3513d6141 100644
--- a/src/mainboard/ibm/e326/auto.c
+++ b/src/mainboard/ibm/e326/auto.c
@@ -25,6 +25,7 @@
#include "superio/NSC/pc87366/pc87366_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1)
@@ -161,21 +162,7 @@ static void main(unsigned long bist)
unsigned nodeid;
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
-
- nodeid = lapicid() & 0xf;
-
- /* Has this cpu already booted? */
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE);
diff --git a/src/mainboard/island/aruma/auto.c b/src/mainboard/island/aruma/auto.c
index d1899e934a..d5a3591305 100644
--- a/src/mainboard/island/aruma/auto.c
+++ b/src/mainboard/island/aruma/auto.c
@@ -25,6 +25,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -128,31 +129,7 @@ static void main(unsigned long bist)
int needs_reset;
if (bist == 0) {
- unsigned nodeid;
-
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
-
- nodeid=lapicid() & 0xf;
-
-
-#if ENABLE_APIC_EXT_ID == 1
- enable_apic_ext_id(nodeid);
- if(nodeid != 0) {
- /* CPU apicid is from 0x10 */
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID)
- | (APIC_ID_OFFSET<<24) ) );
- }
-#endif
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -173,20 +150,20 @@ static void main(unsigned long bist)
print_pci_devices();
#endif
-#if (ALLOW_HT_OVERCLOCKING==1) && (USE_FALLBACK_IMAGE==0)
- if(read_option(CMOS_VSTART_amdk8_1GHz, CMOS_VLEN_amdk8_1GHz, 0))
- {
- print_debug("AMDK8 allowed at 1GHz\r\n");
- } else {
- print_debug("AMDK8 allowed at 800Hz only\r\n");
- }
- if(read_option(CMOS_VSTART_amd8131_800MHz, CMOS_VLEN_amd8131_800MHz, 0))
- {
- print_debug("AMD8131 allowed at 800MHz\r\n");
- } else {
- print_debug("AMD8131 allowed at 600Hz only\r\n");
- }
-#endif
+//#if (ALLOW_HT_OVERCLOCKING==1) && (USE_FALLBACK_IMAGE==0)
+// if(read_option(CMOS_VSTART_amdk8_1GHz, CMOS_VLEN_amdk8_1GHz, 0))
+// {
+// print_debug("AMDK8 allowed at 1GHz\r\n");
+// } else {
+// print_debug("AMDK8 allowed at 800Hz only\r\n");
+// }
+// if(read_option(CMOS_VSTART_amd8131_800MHz, CMOS_VLEN_amd8131_800MHz, 0))
+// {
+// print_debug("AMD8131 allowed at 800MHz\r\n");
+// } else {
+// print_debug("AMD8131 allowed at 600Hz only\r\n");
+// }
+//#endif
if (needs_reset) {
print_info("HyperT reset -\r\n");
soft_reset();
diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c
index a076c37a44..61f5aba00d 100644
--- a/src/mainboard/newisys/khepri/auto.c
+++ b/src/mainboard/newisys/khepri/auto.c
@@ -23,6 +23,7 @@
#include "superio/NSC/pc87360/pc87360_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
@@ -111,21 +112,7 @@ static void main(unsigned long bist)
unsigned nodeid;
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
- enable_lapic();
- init_timer();
-
- nodeid = lapicid() & 0xf;
-
- /* Has this cpu already booted? */
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
- if (!boot_cpu()) {
- stop_this_cpu();
- }
+ k8_init_and_stop_secondaries();
}
/* Setup the console */
pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
diff --git a/src/mainboard/tyan/s2875/auto.c b/src/mainboard/tyan/s2875/auto.c
index 7b75db20ab..d26e5a5f63 100644
--- a/src/mainboard/tyan/s2875/auto.c
+++ b/src/mainboard/tyan/s2875/auto.c
@@ -24,6 +24,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -112,11 +113,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "sdram/generic_sdram.c"
#include "northbridge/amd/amdk8/resourcemap.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -149,47 +145,8 @@ static void main(unsigned long bist)
int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
-
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
-// start_other_core(id.nodeid);
- }
-#else
- nodeid = lapicid();
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -202,9 +159,6 @@ static void main(unsigned long bist)
setup_default_resource_map();
needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- start_other_cores();
-#endif
needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
if (needs_reset) {
print_info("ht reset -\r\n");
diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c
index 2532386132..b8ce483fc0 100644
--- a/src/mainboard/tyan/s2880/auto.c
+++ b/src/mainboard/tyan/s2880/auto.c
@@ -24,6 +24,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -149,46 +150,8 @@ static void main(unsigned long bist)
};
int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
-
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
- }
-#else
- nodeid = lapicid();
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -201,10 +164,6 @@ static void main(unsigned long bist)
setup_default_resource_map();
needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- start_other_cores();
-#endif
-
needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
if (needs_reset) {
print_info("ht reset -\r\n");
diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c
index fc622793d3..eb1e382ee3 100644
--- a/src/mainboard/tyan/s2881/auto.c
+++ b/src/mainboard/tyan/s2881/auto.c
@@ -24,6 +24,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -114,11 +115,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* tyan does not want the default */
#include "resourcemap.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -156,39 +152,7 @@ static void main(unsigned long bist)
#endif
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
- }
-#else
- nodeid = lapicid();
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -200,9 +164,6 @@ static void main(unsigned long bist)
setup_s2881_resource_map();
needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- start_other_cores();
-#endif
// automatically set that for you, but you might meet tight space
needs_reset |= ht_setup_chains_x();
if (needs_reset) {
diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c
index 910db9e8a5..7edb666b9c 100644
--- a/src/mainboard/tyan/s2882/auto.c
+++ b/src/mainboard/tyan/s2882/auto.c
@@ -24,6 +24,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -113,11 +114,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -160,40 +156,8 @@ static void main(unsigned long bist)
#endif
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
- }
-#else
- nodeid = lapicid();
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
- }
+ k8_init_and_stop_secondaries();
+ }
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
@@ -204,9 +168,6 @@ static void main(unsigned long bist)
setup_default_resource_map();
needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- start_other_cores();
-#endif
needs_reset |= ht_setup_chains_x();
if (needs_reset) {
print_info("ht reset -\r\n");
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
index 8275f6d5d7..f4f30737ab 100644
--- a/src/mainboard/tyan/s2885/auto.c
+++ b/src/mainboard/tyan/s2885/auto.c
@@ -23,6 +23,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -121,13 +122,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* tyan does not want the default */
#include "resourcemap.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -160,72 +154,9 @@ static void main(unsigned long bist)
};
int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-
- id = get_node_core_id_x(); // that is initid
- #if ENABLE_APIC_EXT_ID == 1
- if(id.coreid == 0) {
- enable_apic_ext_id(id.nodeid);
- }
- #endif
-#else
- nodeid = get_node_id();
- #if ENABLE_APIC_EXT_ID == 1
- enable_apic_ext_id(nodeid);
- #endif
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- #if ENABLE_APIC_EXT_ID == 1
- #if LIFT_BSP_APIC_ID == 0
- if( id.nodeid != 0 ) //all except cores in node0
- #endif
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) );
- #endif
-
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
- }
-
-#else
- #if ENABLE_APIC_EXT_ID == 1
- #if LIFT_BSP_APIC_ID == 0
- if(nodeid != 0)
- #endif
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10
-
- #endif
-
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -238,10 +169,6 @@ static void main(unsigned long bist)
setup_s2885_resource_map();
needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- start_other_cores();
-#endif
-
// automatically set that for you, but you might meet tight space
needs_reset |= ht_setup_chains_x();
diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c
index 4637b4e9c6..be81f89e11 100644
--- a/src/mainboard/tyan/s2891/auto.c
+++ b/src/mainboard/tyan/s2891/auto.c
@@ -26,6 +26,7 @@
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#include "northbridge/amd/amdk8/setup_resource_map.c"
@@ -77,11 +78,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* tyan does not want the default */
#include "resourcemap.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -125,45 +121,10 @@ static void main(unsigned long bist)
#endif
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-#endif
-
- enable_lapic();
- init_timer();
-
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
- }
-#else
- nodeid = lapicid();
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- post_code(0x31);
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
- post_code(0x32);
+ // post_code(0x32);
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
@@ -175,12 +136,8 @@ static void main(unsigned long bist)
setup_s2891_resource_map();
needs_reset = setup_coherent_ht_domain();
-
-#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
-#endif
- needs_reset |= ht_setup_chains_x();
+
+ needs_reset |= ht_setup_chains_x();
needs_reset |= ck804_early_setup_x();
diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c
index 25967056de..1d19ecfafc 100644
--- a/src/mainboard/tyan/s2892/auto.c
+++ b/src/mainboard/tyan/s2892/auto.c
@@ -26,6 +26,7 @@
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#include "northbridge/amd/amdk8/setup_resource_map.c"
@@ -76,11 +77,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* tyan does not want the default */
#include "resourcemap.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -125,47 +121,9 @@ static void main(unsigned long bist)
};
int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
-// start_other_core(id.nodeid);
- }
-#else
- nodeid = lapicid();
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
@@ -179,12 +137,8 @@ static void main(unsigned long bist)
setup_s2892_resource_map();
needs_reset = setup_coherent_ht_domain();
-
-#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
-#endif
- needs_reset |= ht_setup_chains_x();
+
+ needs_reset |= ht_setup_chains_x();
needs_reset |= ck804_early_setup_x();
diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c
index 0a26f21735..8c11f30fa7 100644
--- a/src/mainboard/tyan/s2895/auto.c
+++ b/src/mainboard/tyan/s2895/auto.c
@@ -28,6 +28,7 @@
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
@@ -106,12 +107,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* tyan does not want the default */
#include "resourcemap.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
#define FIRST_CPU 1
#define SECOND_CPU 1
@@ -163,79 +158,12 @@ static void main(unsigned long bist)
};
int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-
- id = get_node_core_id_x(); // that is initid
- #if ENABLE_APIC_EXT_ID == 1
- if(id.coreid == 0) {
- enable_apic_ext_id(id.nodeid);
- }
- #endif
-#else
- nodeid = get_node_id();
- #if ENABLE_APIC_EXT_ID == 1
- enable_apic_ext_id(nodeid);
- #endif
-#endif
-
- enable_lapic();
- init_timer();
-
- post_code(0x30);
-
-#if CONFIG_LOGICAL_CPUS==1
- #if ENABLE_APIC_EXT_ID == 1
- #if LIFT_BSP_APIC_ID == 0
- if( id.nodeid != 0 ) //all except cores in node0
- #endif
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) );
- #endif
-
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
- }
-
-#else
- #if ENABLE_APIC_EXT_ID == 1
- #if LIFT_BSP_APIC_ID == 0
- if(nodeid != 0)
- #endif
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10
-
- #endif
-
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- post_code(0x31);
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
- post_code(0x32);
+ // post_code(0x32);
lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
@@ -249,10 +177,6 @@ static void main(unsigned long bist)
setup_s2895_resource_map();
needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
-#endif
needs_reset |= ht_setup_chains_x();
diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c
index 3e0d4825df..bcabf22eef 100644
--- a/src/mainboard/tyan/s4880/auto.c
+++ b/src/mainboard/tyan/s4880/auto.c
@@ -24,6 +24,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -125,11 +126,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* tyan does not want the default */
#include "resourcemap.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
#define FIRST_CPU 1
#define SECOND_CPU 1
@@ -202,47 +198,9 @@ static void main(unsigned long bist)
};
int i;
int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
-// start_other_core(id.nodeid);
- }
-#else
- nodeid = lapicid();
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -256,10 +214,6 @@ static void main(unsigned long bist)
needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- start_other_cores();
-#endif
-
needs_reset |= ht_setup_chains_x();
if (needs_reset) {
diff --git a/src/mainboard/tyan/s4882/auto.c b/src/mainboard/tyan/s4882/auto.c
index e8d46e7961..ba58af9d63 100644
--- a/src/mainboard/tyan/s4882/auto.c
+++ b/src/mainboard/tyan/s4882/auto.c
@@ -23,6 +23,7 @@
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -129,13 +130,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
/* tyan does not want the default */
#include "resourcemap.c"
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
#define FIRST_CPU 1
#define SECOND_CPU 1
@@ -208,68 +202,9 @@ static void main(unsigned long bist)
};
int i;
int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-
- id = get_node_core_id_x(); // that is initid
- #if ENABLE_APIC_EXT_ID == 1
- if(id.coreid == 0) {
- enable_apic_ext_id(id.nodeid);
- }
- #endif
-#else
- nodeid = get_node_id();
- #if ENABLE_APIC_EXT_ID == 1
- enable_apic_ext_id(nodeid);
- #endif
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- #if ENABLE_APIC_EXT_ID == 1
- #if LIFT_BSP_APIC_ID == 0
- if( id.nodeid != 0 ) //all except cores in node0
- #endif
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) );
- #endif
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
- }
-#else
- #if ENABLE_APIC_EXT_ID == 1
- #if LIFT_BSP_APIC_ID == 0
- if(nodeid != 0)
- #endif
- lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10
- #endif
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu(); // it will stop all cores except core0 of cpu0
- }
+ k8_init_and_stop_secondaries();
}
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -283,11 +218,6 @@ static void main(unsigned long bist)
needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
-#endif
-
needs_reset |= ht_setup_chains_x();
if (needs_reset) {
print_info("ht reset -\r\n");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 16:34:05 +0000