diff options
| -rw-r--r-- | Documentation/Intel/Board/board.html | 79 | ||||
| -rw-r--r-- | Documentation/Intel/SoC/soc.html | 53 | ||||
| -rw-r--r-- | Documentation/Intel/development.html | 58 |
3 files changed, 190 insertions, 0 deletions
diff --git a/Documentation/Intel/Board/board.html b/Documentation/Intel/Board/board.html index d50ff4e74f..47d329515d 100644 --- a/Documentation/Intel/Board/board.html +++ b/Documentation/Intel/Board/board.html @@ -15,6 +15,7 @@ <ol> <li><a href="#RequiredFiles">Required Files</a></li> <li>Enable <a href="#SerialOutput">Serial Output</a></li> + <li>Load the <a href="#SpdData">Memory Timing Data</a></li> </ol> @@ -101,6 +102,84 @@ </ol> +<hr> +<h1><a name="SpdData">Memory Timing Data</a></h1> +<p> + Memory timing data is located in the flash. This data is in the format of + <a target="_blank" href="https://en.wikipedia.org/wiki/Serial_presence_detect">serial presence detect</a> + (SPD) data. + Use the following steps to load the SPD data: +</p> +<ol> + <li>Edit Kconfig to add the DISPLAY_SPD_DATA" value which enables the + display of the SPD data being passed to MemoryInit + </li> + <li>Create an "spd" subdirectory</li> + <li>Create an spd/spd.c file for the SPD implementation + <ol type="A"> + <li>Implement the mainboard_fill_spd_data routine + <ol type="i"> + <li>Read the SPD data either from the spd.bin file or using I2C or SMBUS</li> + <li>Fill in the pei_data structure with SPD data for each of the DIMMs</li> + <li>Set the DIMM channel configuration</li> + </ol> + </li> + </ol> + </li> + <li>Add an .spd.hex file containing the memory timing data to the spd subdirectory</li> + <li>Create spd/Makefile.inc + <ol type="A"> + <li>Add spd.c to romstage</li> + <li>Add the .spd.hex file to SPD_SOURCES</li> + </ol> + </li> + <li>Edit Makefile.inc to add the spd subdirectory</li> + <li>Edit romstage.c + <ol type="A"> + <li>Call mainboard_fill_spd_data</li> + <li>Add mainboard_memory_init_params to copy the SPD and DRAM + configuration data from the pei_data structure into the UPDs + for MemoryInit + </li> + </ol> + </li> + <li>Edit devicetree.cb + <ol type="A"> + <li>Include the UPD parameters for MemoryInit except for: + <ul> + <li>Address of SPD data</li> + <li>DRAM configuration set above</li> + </ul> + </li> + </ol> + </li> + <li>A working FSP + <a target="_blank" href="../fsp1_1.html#MemoryInit">MemoryInit</a> + routine is required to complete debugging</li> + <li>Debug the result until port 0x80 outputs + <ol type="A"> + <li>0x34: + - Just after entering + <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l67">raminit</a> + </li> + <li>0x36: + - Just before displaying the + <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l106">UPD parameters</a> + for FSP MemoryInit + </li> + <li>0x92: <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l219">POST_FSP_MEMORY_INIT</a> + - Just before calling FSP + <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l125">MemoryInit</a> + </li> + <li>0x37: + - Just after returning from FSP + <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l127">MemoryInit</a> + </li> + </ol> + </li> + <li>Continue debugging with CONFIG_DISPLAY_HOBS enabled until TempRamExit is called</li> +</ol> + <hr> <p>Modified: 31 January 2016</p> diff --git a/Documentation/Intel/SoC/soc.html b/Documentation/Intel/SoC/soc.html index 0b0615d049..b5daac8fb5 100644 --- a/Documentation/Intel/SoC/soc.html +++ b/Documentation/Intel/SoC/soc.html @@ -22,6 +22,8 @@ <li><a href="#Romstage">Romstage</a> <ol type="A"> <li>Enable <a href="#SerialOutput">Serial Output"</a></li> + <li>Get the <a href="#PreviousSleepState">Previous Sleep State</a></li> + <li>Add the <a href="#MemoryInit">MemoryInit</a> Support</li> </ol> </li> </ol> @@ -328,6 +330,57 @@ Use the following steps to debug the call to TempRamInit: </ol> +<h2><a name="PreviousSleepState">Determine Previous Sleep State</a></h2> +<p> + The following steps implement the code to get the previous sleep state: +</p> +<ol> + <li>Implement the fill_power_state routine which determines the previous sleep state</li> + <li>Debug the result until port 0x80 outputs + <ol type="A"> + <li>0x32: + - Just after entering + <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/romstage.c;hb=HEAD#l99">romstage_common</a> + </li> + <li>0x33 - Just after calling + <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/romstage.c;hb=HEAD#l113">soc_pre_ram_init</a> + </li> + <li>0x34: + - Just after entering + <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l67">raminit</a> + </li> + </ol> +</ol> + + +<h2><a name="MemoryInit">MemoryInit Support</a></h2> +<p> + The following steps implement the code to support the FSP MemoryInit call: +</p> +<ol> + <li>Add the chip.h header file to define the UPD values which get passed + to MemoryInit. Skip the values containing SPD addresses and DRAM + configuration data which is determined by the board. + <p> + <b>Build Note</b>: The src/mainboard/<Vendor>/<Board>/devicetree.cb + file specifies the default values for these parameters. The build + process creates the static.c module which contains the config data + structure containing these values. + </p> + </li> + <li>Edit romstage/romstage.c + <ol type="A"> + <li>Implement the romstage/romstage.c/soc_memory_init_params routine to + copy the values from the config structure into the UPD structure + </li> + <li>Implement the soc_display_memory_init_params routine to display + the updated UPD parameters by calling fsp_display_upd_value + </li> + </ol> + </li> +</ol> + + <hr> <p>Modified: 31 January 2016</p> </body> diff --git a/Documentation/Intel/development.html b/Documentation/Intel/development.html index b90fa96567..0cd2bd59b7 100644 --- a/Documentation/Intel/development.html +++ b/Documentation/Intel/development.html @@ -82,6 +82,18 @@ </ol> </li> <li>Enable <a target="_blank" href="fsp1_1.html#corebootFspDebugging">coreboot/FSP</a> debugging</li> + <li>Determine the <a target="_blank" href="SoC/soc.html#PreviousSleepState">Previous Sleep State</a></li> + <li>Enable DRAM: + <ol type="A"> + <li>Implement the SoC + <a target="_blank" href="SoC/soc.html#MemoryInit">MemoryInit</a> + Support + </li> + <li>Implement the board support to read the + <a target="_blank" href="Board/board.html#SpdData">Memory Timing Data</a> + </li> + </ol> + </li> </ol> @@ -125,6 +137,32 @@ <th>Testing</th> </tr> <tr> + <td>DRAM</td> + <td> + Load SPD data: src/soc/mainboard/<Vendor>/<Board>/spd/<a target="_blank" href="Board/board.html#SpdData">spd.c</a><br> + UPD Setup: + <ul> + <li>src/soc<Vendor>//<Chip Family>/romstage/<a target="_blank" href="SoC/soc.html#MemoryInit">romstage.c</a></li> + <li>src/mainboard/<Vendor>/<Board>/<a target="_blank" href="Board/board.html#SpdData">romstage.c</a></li> + </ul> + FSP 1.1 MemoryInit called from src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l126">raminit.c</a> + </td> + <td>Select the following Kconfig values + <ul> + <li>DISPLAY_HOBS</li> + <li>DISPLAY_UPD_DATA</li> + </ul> + Testing successful if: + <ul> + <li>MemoryInit UPD values are correct</li> + <li>MemoryInit returns 0 (success) and</li> + <li>The the message "ERROR - coreboot's requirements not met by FSP binary!" + is not displayed + </li> + </ul> + </td> + </tr> + <tr> <td>Serial Port</td> <td> SoC <a target="_blank" href="SoC/soc.html#SerialOutput">Support</a><br> @@ -150,6 +188,26 @@ is displayed<br> </td> </tr> + <tr> + <td>MemoryInit</td> + <td><a target="_blank" href="SoC/soc.html#MemoryInit">SoC</a> support<br> + <a target="_blank" href="Board/board.html#SpdData">Board</a> support<br> + </td> + <td>Select the following Kconfig values + <ul> + <li>DISPLAY_HOBS</li> + <li>DISPLAY_UPD_DATA</li> + </ul> + Testing successful if: + <ul> + <li>MemoryInit UPD values are correct</li> + <li>MemoryInit returns 0 (success) and</li> + <li>The the message "ERROR - coreboot's requirements not met by FSP binary!" + is not displayed + </li> + </ul> + </td> + </tr> </table> |