diff options
| -rw-r--r-- | src/mainboard/google/dedede/variants/drawcia/overridetree.cb | 22 |
1 files changed, 21 insertions, 1 deletions
diff --git a/src/mainboard/google/dedede/variants/drawcia/overridetree.cb b/src/mainboard/google/dedede/variants/drawcia/overridetree.cb index e157894cbf..852af67461 100644 --- a/src/mainboard/google/dedede/variants/drawcia/overridetree.cb +++ b/src/mainboard/google/dedede/variants/drawcia/overridetree.cb @@ -257,6 +257,8 @@ chip soc/intel/jasperlake register "remote_name" = ""IPU0"" register "has_power_resource" = "1" + register "low_power_probe" = "1" + #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz @@ -289,9 +291,17 @@ chip soc/intel/jasperlake register "chip_name" = ""DW AF DAC"" register "device_type" = "INTEL_ACPI_CAMERA_VCM" - register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC"" + register "has_power_resource" = "1" register "vcm_compat" = ""dongwoon,dw9714"" + register "low_power_probe" = "1" + register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8 + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" device i2c 0C on end end chip drivers/intel/mipi_camera @@ -305,7 +315,17 @@ chip soc/intel/jasperlake register "nvm_readonly" = "1" register "nvm_width" = "0x08" register "nvm_compat" = ""atmel,24c08"" + register "low_power_probe" = "1" + register "has_power_resource" = "1" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D14" #power_enable_1p2 + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" device i2c 50 on end end end # I2C 3 |