diff options
| -rw-r--r-- | src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c | 13 | ||||
| -rw-r--r-- | src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb | 4 |
2 files changed, 16 insertions, 1 deletions
diff --git a/src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c b/src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c index 6897658ad5..d13a97bee9 100644 --- a/src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c +++ b/src/mainboard/asus/p8x7x-series/variants/p8z77-m/early_init.c @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ #include <bootblock_common.h> +#include <device/pnp_ops.h> #include <northbridge/intel/sandybridge/raminit.h> #include <northbridge/intel/sandybridge/pei_data.h> #include <southbridge/intel/bd82x6x/pch.h> @@ -11,11 +12,23 @@ #include <option.h> #define SERIAL_DEV PNP_DEV(0x2e, NCT6779D_SP1) +#define GPIO0_DEV PNP_DEV(0x2e, NCT6779D_WDT1_GPIO01_V) void bootblock_mainboard_early_init(void) { nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + nuvoton_pnp_enter_conf_state(GPIO0_DEV); + + /* Turn on DRAM_LED. If raminit dies, this would remain on and we know + * we have a problem. We turn it off in ramstage. */ + pnp_set_logical_device(GPIO0_DEV); + pnp_write_config(GPIO0_DEV, 0x30, 0x02); + pnp_write_config(GPIO0_DEV, 0xe0, 0x7f); + pnp_write_config(GPIO0_DEV, 0xe1, 0x00); + + nuvoton_pnp_exit_conf_state(GPIO0_DEV); + /* * TODO: Put PCIe root port 7 (00:1c.6) into subtractive decode and have it accept I/O * cycles. This should allow a POST card in the PCI slot, connected via an ASM1083 diff --git a/src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb b/src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb index 6232c9be83..41351b5bdd 100644 --- a/src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb +++ b/src/mainboard/asus/p8x7x-series/variants/p8z77-m/overridetree.cb @@ -59,6 +59,9 @@ chip northbridge/intel/sandybridge end device pnp 2e.6 off end # CIR device pnp 2e.8 off end # WDT1 + device pnp 2e.108 on # GPIO 0 + drq 0xe1 = 0x80 # GP07 high turns DRAM_LED off + end device pnp 2e.a on # ACPI drq 0xe4 = 0x10 # Enable 3VSBSW#, needed for S3 suspend drq 0xe7 = 0x11 # HWM reset by LRESET#, 0.5s S3 delay for compatibility @@ -78,7 +81,6 @@ chip northbridge/intel/sandybridge end device pnp 2e.9 off end # GPIO 8 device pnp 2e.308 on end # GPIO by I/O - device pnp 2e.108 on end # GPIO 0 device pnp 2e.109 on end # GPIO 1 device pnp 2e.209 on # GPIO 2 drq 0xe0 = 0xbf # GP26 output |