summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/amd/birman_plus/Kconfig14
-rw-r--r--src/mainboard/amd/birman_plus/Kconfig.name3
-rw-r--r--src/mainboard/amd/birman_plus/Makefile.mk7
-rw-r--r--src/mainboard/amd/birman_plus/board_glinda.fmd9
-rw-r--r--src/mainboard/amd/birman_plus/chromeos_glinda.fmd35
-rw-r--r--src/mainboard/amd/birman_plus/devicetree_glinda.cb227
-rw-r--r--src/mainboard/amd/birman_plus/devicetree_phoenix.cb2
-rw-r--r--src/mainboard/amd/birman_plus/mainboard.c2
-rw-r--r--src/mainboard/amd/birman_plus/port_descriptors_glinda.c130
-rw-r--r--src/mainboard/amd/birman_plus/port_descriptors_phoenix.c (renamed from src/mainboard/amd/birman_plus/port_descriptors.c)1
10 files changed, 421 insertions, 9 deletions
diff --git a/src/mainboard/amd/birman_plus/Kconfig b/src/mainboard/amd/birman_plus/Kconfig
index 29ad9c0f85..df2568e6ad 100644
--- a/src/mainboard/amd/birman_plus/Kconfig
+++ b/src/mainboard/amd/birman_plus/Kconfig
@@ -20,20 +20,28 @@ config BOARD_AMD_BIRMANPLUS_PHOENIX
select BOARD_AMD_BIRMANPLUS_COMMON
select SOC_AMD_PHOENIX_FSP
+config BOARD_AMD_BIRMANPLUS_GLINDA
+ select BOARD_AMD_BIRMANPLUS_COMMON
+ select SOC_AMD_GLINDA
+
if BOARD_AMD_BIRMANPLUS_COMMON
config FMDFILE
default "src/mainboard/amd/birman_plus/chromeos_phoenix.fmd" if CHROMEOS && BOARD_AMD_BIRMANPLUS_PHOENIX
+ default "src/mainboard/amd/birman_plus/chromeos_glinda.fmd" if CHROMEOS && BOARD_AMD_BIRMANPLUS_GLINDA
default "src/mainboard/amd/birman_plus/board_phoenix.fmd" if BOARD_AMD_BIRMANPLUS_PHOENIX
+ default "src/mainboard/amd/birman_plus/board_glinda.fmd" if BOARD_AMD_BIRMANPLUS_GLINDA
config MAINBOARD_DIR
- default "amd/birman_plus" if BOARD_AMD_BIRMANPLUS_PHOENIX
+ default "amd/birman_plus" if BOARD_AMD_BIRMANPLUS_PHOENIX || BOARD_AMD_BIRMANPLUS_GLINDA
config MAINBOARD_PART_NUMBER
default "Birmanplus_Phoenix" if BOARD_AMD_BIRMANPLUS_PHOENIX
+ default "Birmanplus_Glinda" if BOARD_AMD_BIRMANPLUS_GLINDA
config DEVICETREE
- default "devicetree_phoenix.cb"
+ default "devicetree_phoenix.cb" if BOARD_AMD_BIRMANPLUS_PHOENIX
+ default "devicetree_glinda.cb" if BOARD_AMD_BIRMANPLUS_GLINDA
config BIRMANPLUS_HAVE_MCHP_FW
bool "Have Microchip EC firmware?"
@@ -71,7 +79,7 @@ config RO_REGION_ONLY
string
depends on VBOOT_SLOTS_RW_AB || VBOOT_SLOTS_RW_A
# Add the EFS and EC to the RO region only
- # This is a birman-specific override of soc/amd/(phoenix | glinda)/Kconfig
+ # This is a birmanplus specific override of soc/amd/(phoenix | glinda)/Kconfig
default "apu/amdfw apu/ecfw"
config CHROMEOS
diff --git a/src/mainboard/amd/birman_plus/Kconfig.name b/src/mainboard/amd/birman_plus/Kconfig.name
index 69834bc263..484354356c 100644
--- a/src/mainboard/amd/birman_plus/Kconfig.name
+++ b/src/mainboard/amd/birman_plus/Kconfig.name
@@ -2,3 +2,6 @@ comment "BirmanPlus"
config BOARD_AMD_BIRMANPLUS_PHOENIX
bool "-> BirmanPlus for Phoenix SoC"
+
+config BOARD_AMD_BIRMANPLUS_GLINDA
+ bool "-> BirmanPlus for Glinda SoC"
diff --git a/src/mainboard/amd/birman_plus/Makefile.mk b/src/mainboard/amd/birman_plus/Makefile.mk
index f08f3050a8..5ef9ed92e3 100644
--- a/src/mainboard/amd/birman_plus/Makefile.mk
+++ b/src/mainboard/amd/birman_plus/Makefile.mk
@@ -4,12 +4,13 @@ bootblock-y += bootblock.c
bootblock-y += early_gpio.c
bootblock-y += ec.c
-romstage-$(CONFIG_BOARD_AMD_BIRMANPLUS_PHOENIX) += port_descriptors.c
+romstage-$(CONFIG_BOARD_AMD_BIRMANPLUS_PHOENIX) += port_descriptors_phoenix.c
+romstage-$(CONFIG_BOARD_AMD_BIRMANPLUS_GLINDA) += port_descriptors_glinda.c
ramstage-y += chromeos.c
ramstage-y += gpio.c
-ramstage-$(CONFIG_BOARD_AMD_BIRMANPLUS_PHOENIX) += port_descriptors.c
-
+ramstage-$(CONFIG_BOARD_AMD_BIRMANPLUS_PHOENIX) += port_descriptors_phoenix.c
+ramstage-$(CONFIG_BOARD_AMD_BIRMANPLUS_GLINDA) += port_descriptors_glinda.c
ifneq ($(wildcard $(MAINBOARD_BLOBS_DIR)/APCB_FP8_LPDDR5.bin),)
APCB_SOURCES = $(MAINBOARD_BLOBS_DIR)/APCB_FP8_LPDDR5.bin
diff --git a/src/mainboard/amd/birman_plus/board_glinda.fmd b/src/mainboard/amd/birman_plus/board_glinda.fmd
new file mode 100644
index 0000000000..756709044e
--- /dev/null
+++ b/src/mainboard/amd/birman_plus/board_glinda.fmd
@@ -0,0 +1,9 @@
+FLASH@0xFF000000 16M {
+ BIOS {
+ EC_SIG 4K
+ FMAP 4K
+ COREBOOT(CBFS)
+ EC_BODY@15872K 256K
+ RW_MRC_CACHE 120K
+ }
+}
diff --git a/src/mainboard/amd/birman_plus/chromeos_glinda.fmd b/src/mainboard/amd/birman_plus/chromeos_glinda.fmd
new file mode 100644
index 0000000000..843a026559
--- /dev/null
+++ b/src/mainboard/amd/birman_plus/chromeos_glinda.fmd
@@ -0,0 +1,35 @@
+FLASH@0xFF000000 16M {
+ SI_BIOS {
+ WP_RO 8M {
+ EC_SIG 4K
+ RO_VPD(PRESERVE) 16K
+ RO_SECTION {
+ FMAP 2K
+ RO_FRID 64
+ COREBOOT(CBFS)
+ GBB 448K
+ }
+ }
+ RW_SECTION_A 3M {
+ VBLOCK_A 8K
+ FW_MAIN_A(CBFS)
+ RW_FWID_A 256
+ }
+ RW_SECTION_B 3M {
+ VBLOCK_B 8K
+ FW_MAIN_B(CBFS)
+ RW_FWID_B 256
+ }
+ RW_ELOG(PRESERVE) 4K
+ RW_SHARED 16K {
+ SHARED_DATA 8K
+ VBLOCK_DEV 8K
+ }
+ RW_VPD(PRESERVE) 8K
+ RW_NVRAM(PRESERVE) 20K
+ SMMSTORE(PRESERVE) 64K
+ RW_LEGACY(CBFS)
+ EC_BODY@15872K 256K
+ RW_MRC_CACHE(PRESERVE) 120K
+ }
+}
diff --git a/src/mainboard/amd/birman_plus/devicetree_glinda.cb b/src/mainboard/amd/birman_plus/devicetree_glinda.cb
new file mode 100644
index 0000000000..025680e2f1
--- /dev/null
+++ b/src/mainboard/amd/birman_plus/devicetree_glinda.cb
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# TODO: Update for birmanplus
+
+chip soc/amd/glinda
+ register "common_config.espi_config" = "{
+ .std_io_decode_bitmap = ESPI_DECODE_IO_0x80_EN | ESPI_DECODE_IO_0X2E_0X2F_EN | ESPI_DECODE_IO_0X60_0X64_EN,
+ .generic_io_range[0] = {
+ .base = 0x3f8,
+ .size = 8,
+ },
+ .generic_io_range[1] = {
+ .base = 0x600,
+ .size = 256,
+ },
+ .io_mode = ESPI_IO_MODE_QUAD,
+ .op_freq_mhz = ESPI_OP_FREQ_16_MHZ,
+ .crc_check_enable = 1,
+ .alert_pin = ESPI_ALERT_PIN_PUSH_PULL,
+ .periph_ch_en = 1,
+ .vw_ch_en = 1,
+ .oob_ch_en = 1,
+ .flash_ch_en = 0,
+ }"
+
+ register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL |
+ GPIO_I2C2_SCL | GPIO_I2C3_SCL"
+
+ register "i2c[0].early_init" = "1"
+ register "i2c[1].early_init" = "1"
+ register "i2c[2].early_init" = "1"
+ register "i2c[3].early_init" = "1"
+
+ # I2C Pad Control RX Select Configuration
+ register "i2c_pad[0].rx_level" = "I2C_PAD_RX_1_8V"
+ register "i2c_pad[1].rx_level" = "I2C_PAD_RX_1_8V"
+ register "i2c_pad[2].rx_level" = "I2C_PAD_RX_1_8V"
+ register "i2c_pad[3].rx_level" = "I2C_PAD_RX_1_8V"
+
+ register "s0ix_enable" = "true"
+
+ register "pspp_policy" = "DXIO_PSPP_DISABLED" # TODO: reenable when PSPP works
+
+ register "usb_phy_custom" = "1"
+ register "usb_phy" = "{
+ .Usb2PhyPort[0] = {
+ .compdistune = 0x3,
+ .pllbtune = 0x1,
+ .pllitune = 0x0,
+ .pllptune = 0xe,
+ .sqrxtune = 0x3,
+ .txfslstune = 0x3,
+ .txpreempamptune = 0x2,
+ .txpreemppulsetune = 0x0,
+ .txrisetune = 0x1,
+ .txvreftune = 0x3,
+ .txhsxvtune = 0x3,
+ .txrestune = 0x2,
+ },
+ .Usb2PhyPort[1] = {
+ .compdistune = 0x3,
+ .pllbtune = 0x1,
+ .pllitune = 0x0,
+ .pllptune = 0xe,
+ .sqrxtune = 0x3,
+ .txfslstune = 0x3,
+ .txpreempamptune = 0x2,
+ .txpreemppulsetune = 0x0,
+ .txrisetune = 0x1,
+ .txvreftune = 0x3,
+ .txhsxvtune = 0x3,
+ .txrestune = 0x2,
+ },
+ .Usb2PhyPort[2] = {
+ .compdistune = 0x3,
+ .pllbtune = 0x1,
+ .pllitune = 0x0,
+ .pllptune = 0xe,
+ .sqrxtune = 0x3,
+ .txfslstune = 0x3,
+ .txpreempamptune = 0x2,
+ .txpreemppulsetune = 0x0,
+ .txrisetune = 0x1,
+ .txvreftune = 0x3,
+ .txhsxvtune = 0x3,
+ .txrestune = 0x2,
+ },
+ .Usb2PhyPort[3] = {
+ .compdistune = 0x3,
+ .pllbtune = 0x1,
+ .pllitune = 0x0,
+ .pllptune = 0xe,
+ .sqrxtune = 0x3,
+ .txfslstune = 0x3,
+ .txpreempamptune = 0x2,
+ .txpreemppulsetune = 0x0,
+ .txrisetune = 0x1,
+ .txvreftune = 0x3,
+ .txhsxvtune = 0x3,
+ .txrestune = 0x2,
+ },
+ .Usb2PhyPort[4] = {
+ .compdistune = 0x3,
+ .pllbtune = 0x1,
+ .pllitune = 0x0,
+ .pllptune = 0xe,
+ .sqrxtune = 0x3,
+ .txfslstune = 0x3,
+ .txpreempamptune = 0x2,
+ .txpreemppulsetune = 0x0,
+ .txrisetune = 0x1,
+ .txvreftune = 0x3,
+ .txhsxvtune = 0x3,
+ .txrestune = 0x2,
+ },
+ .Usb2PhyPort[5] = {
+ .compdistune = 0x3,
+ .pllbtune = 0x1,
+ .pllitune = 0x0,
+ .pllptune = 0xe,
+ .sqrxtune = 0x3,
+ .txfslstune = 0x3,
+ .txpreempamptune = 0x2,
+ .txpreemppulsetune = 0x0,
+ .txrisetune = 0x1,
+ .txvreftune = 0x3,
+ .txhsxvtune = 0x3,
+ .txrestune = 0x2,
+ },
+ .Usb3PhyPort[0] = {
+ .tx_term_ctrl = 0x2,
+ .rx_term_ctrl = 0x2,
+ .tx_vboost_lvl_en = 0x0,
+ .tx_vboost_lvl = 0x5,
+ },
+ .Usb3PhyPort[1] = {
+ .tx_term_ctrl = 0x2,
+ .rx_term_ctrl = 0x2,
+ .tx_vboost_lvl_en = 0x0,
+ .tx_vboost_lvl = 0x5,
+ },
+ .Usb3PhyPort[2] = {
+ .tx_term_ctrl = 0x2,
+ .rx_term_ctrl = 0x2,
+ .tx_vboost_lvl_en = 0x0,
+ .tx_vboost_lvl = 0x5,
+ },
+ .ComboPhyStaticConfig[0] = USB_COMBO_PHY_MODE_USB_C,
+ .ComboPhyStaticConfig[1] = USB_COMBO_PHY_MODE_USB_C,
+ .BatteryChargerEnable = 0,
+ .PhyP3CpmP4Support = 0,
+ }"
+
+ register "gpp_clk_config[0]" = "GPP_CLK_REQ"
+ register "gpp_clk_config[1]" = "GPP_CLK_REQ"
+ register "gpp_clk_config[2]" = "GPP_CLK_OFF"
+ register "gpp_clk_config[3]" = "GPP_CLK_REQ"
+
+ device domain 0 on
+ device ref iommu on end
+ device ref gpp_bridge_0 on end # GBE
+ device ref gpp_bridge_1 on end # WIFI
+ device ref gpp_bridge_2 on end # NVMe SSD
+ device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A
+ device ref gfx on end # Internal GPU (GFX)
+ device ref gfx_hda on end # Display HD Audio Controller (GFXAZ)
+ device ref crypto on end # Crypto Coprocessor
+ device ref xhci_0 on # USB 3.1 (USB0)
+ chip drivers/usb/acpi
+ device ref xhci_0_root_hub on
+ chip drivers/usb/acpi
+ device ref usb3_port0 on end
+ end
+ chip drivers/usb/acpi
+ device ref usb2_port0 on end
+ end
+ chip drivers/usb/acpi
+ device ref usb2_port1 on end
+ end
+ end
+ end
+ end
+ device ref xhci_1 on # USB 3.1 (USB1)
+ chip drivers/usb/acpi
+ device ref xhci_1_root_hub on
+ chip drivers/usb/acpi
+ device ref usb3_port2 on end
+ end
+ chip drivers/usb/acpi
+ device ref usb3_port3 on end
+ end
+ chip drivers/usb/acpi
+ device ref usb2_port2 on end
+ end
+ chip drivers/usb/acpi
+ device ref usb2_port3 on end
+ end
+ chip drivers/usb/acpi
+ device ref usb2_port4 on end
+ end
+ end
+ end
+ end
+ device ref acp on end # Audio Processor (ACP)
+ end
+ device ref gpp_bridge_c on # Internal GPP Bridge 2 to Bus C
+ device ref xhci_2 on
+ ops xhci_pci_ops
+ chip drivers/usb/acpi
+ register "type" = "UPC_TYPE_HUB"
+ device usb 0.0 alias xhci_2_root_hub on
+ chip drivers/usb/acpi
+ device usb 2.0 alias usb2_port5 on end
+ end
+ end
+ end
+ end
+ end
+ end
+
+ device ref i2c_0 on end
+ device ref i2c_1 on end
+ device ref i2c_2 on end
+ device ref i2c_3 on end
+ device ref uart_0 on end # UART0
+
+end
diff --git a/src/mainboard/amd/birman_plus/devicetree_phoenix.cb b/src/mainboard/amd/birman_plus/devicetree_phoenix.cb
index 3fc1f0dfca..afd4ca7edd 100644
--- a/src/mainboard/amd/birman_plus/devicetree_phoenix.cb
+++ b/src/mainboard/amd/birman_plus/devicetree_phoenix.cb
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
-# TODO: Update for birman
+# TODO: Update for birmanplus
chip soc/amd/phoenix
register "common_config.espi_config" = "{
diff --git a/src/mainboard/amd/birman_plus/mainboard.c b/src/mainboard/amd/birman_plus/mainboard.c
index 0deba6710f..1e5bc2fda7 100644
--- a/src/mainboard/amd/birman_plus/mainboard.c
+++ b/src/mainboard/amd/birman_plus/mainboard.c
@@ -7,7 +7,7 @@
#include <types.h>
#include "gpio.h"
-/* TODO: Update for birman */
+/* TODO: Update for birmanplus */
/* The IRQ mapping in fch_irq_map ends up getting written to the indirect address space that is
accessed via I/O ports 0xc00/0xc01. */
diff --git a/src/mainboard/amd/birman_plus/port_descriptors_glinda.c b/src/mainboard/amd/birman_plus/port_descriptors_glinda.c
new file mode 100644
index 0000000000..d9bb7d5791
--- /dev/null
+++ b/src/mainboard/amd/birman_plus/port_descriptors_glinda.c
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <device/i2c_simple.h>
+#include <gpio.h>
+#include <soc/platform_descriptors.h>
+#include <types.h>
+
+/* TODO: Update for birmanplus */
+
+static const fsp_dxio_descriptor birman_dxio_descriptors[] = {
+ {
+ .engine_type = PCIE_ENGINE,
+ .port_present = true,
+ .start_logical_lane = 0,
+ .end_logical_lane = 0,
+ .device_number = 2,
+ .function_number = 1,
+ .link_speed_capability = GEN3,
+ .turn_off_unused_lanes = true,
+ .link_aspm = 2,
+ .link_hotplug = HOTPLUG_ENHANCED,
+ .clk_req = CLK_REQ3,
+ },
+ {
+ .engine_type = PCIE_ENGINE,
+ .port_present = true,
+ .start_logical_lane = 1,
+ .end_logical_lane = 1,
+ .device_number = 2,
+ .function_number = 2,
+ .link_speed_capability = GEN3,
+ .turn_off_unused_lanes = true,
+ .link_aspm = 2,
+ .link_hotplug = HOTPLUG_ENHANCED,
+ .clk_req = CLK_REQ1,
+ },
+ {
+ .engine_type = PCIE_ENGINE,
+ .port_present = true,
+ .start_logical_lane = 2,
+ .end_logical_lane = 3,
+ .device_number = 2,
+ .function_number = 3,
+ .link_speed_capability = GEN3,
+ .turn_off_unused_lanes = true,
+ .link_aspm = 2,
+ .link_hotplug = HOTPLUG_ENHANCED,
+ .gpio_group_id = GPIO_27,
+ .clk_req = CLK_REQ0,
+ },
+};
+
+static fsp_ddi_descriptor birman_ddi_descriptors[] = {
+ { /* DDI0 - eDP */
+ .connector_type = DDI_EDP,
+ .aux_index = DDI_AUX1,
+ .hdp_index = DDI_HDP1
+ },
+ { /* DDI1 - HDMI/DP */
+ .connector_type = DDI_HDMI,
+ .aux_index = DDI_AUX2,
+ .hdp_index = DDI_HDP2
+ },
+ { /* DDI2 - DP (type C) */
+ .connector_type = DDI_DP_W_TYPEC,
+ .aux_index = DDI_AUX3,
+ .hdp_index = DDI_HDP3,
+ },
+ { /* DDI3 - DP (type C) */
+ .connector_type = DDI_DP_W_TYPEC,
+ .aux_index = DDI_AUX4,
+ .hdp_index = DDI_HDP4,
+ },
+ { /* DDI4 - DP (type C) */
+ .connector_type = DDI_DP_W_TYPEC,
+ .aux_index = DDI_AUX5,
+ .hdp_index = DDI_HDP5,
+ }
+};
+
+static uint8_t get_ddi1_type(void)
+{
+ const uint8_t eeprom_i2c_bus = 2;
+ const uint8_t eeprom_i2c_address = 0x55;
+ const uint16_t eeprom_connector_type_offset = 2;
+ uint8_t eeprom_connector_type_data[2];
+ uint16_t connector_type;
+
+ if (i2c_2ba_read_bytes(eeprom_i2c_bus, eeprom_i2c_address,
+ eeprom_connector_type_offset, eeprom_connector_type_data,
+ sizeof(eeprom_connector_type_data))) {
+ printk(BIOS_NOTICE,
+ "Display connector type couldn't be determined. Disabling DDI1.\n");
+ return DDI_UNUSED_TYPE;
+ }
+
+ connector_type = eeprom_connector_type_data[1] | eeprom_connector_type_data[0] << 8;
+
+ switch (connector_type) {
+ case 0x0c:
+ printk(BIOS_DEBUG, "Configuring DDI1 as HDMI.\n");
+ return DDI_HDMI;
+ case 0x13:
+ printk(BIOS_DEBUG, "Configuring DDI1 as DP.\n");
+ return DDI_DP;
+ case 0x14:
+ printk(BIOS_DEBUG, "Configuring DDI1 as eDP.\n");
+ return DDI_EDP;
+ case 0x17:
+ printk(BIOS_DEBUG, "Configuring DDI1 as USB-C.\n");
+ return DDI_DP_W_TYPEC;
+ default:
+ printk(BIOS_WARNING, "Unexpected display connector type %x. Disabling DDI1.\n",
+ connector_type);
+ return DDI_UNUSED_TYPE;
+ }
+}
+
+void mainboard_get_dxio_ddi_descriptors(
+ const fsp_dxio_descriptor **dxio_descs, size_t *dxio_num,
+ const fsp_ddi_descriptor **ddi_descs, size_t *ddi_num)
+{
+ birman_ddi_descriptors[1].connector_type = get_ddi1_type();
+
+ *dxio_descs = birman_dxio_descriptors;
+ *dxio_num = ARRAY_SIZE(birman_dxio_descriptors);
+ *ddi_descs = birman_ddi_descriptors;
+ *ddi_num = ARRAY_SIZE(birman_ddi_descriptors);
+}
diff --git a/src/mainboard/amd/birman_plus/port_descriptors.c b/src/mainboard/amd/birman_plus/port_descriptors_phoenix.c
index 85f448ec59..dc23790d1d 100644
--- a/src/mainboard/amd/birman_plus/port_descriptors.c
+++ b/src/mainboard/amd/birman_plus/port_descriptors_phoenix.c
@@ -4,7 +4,6 @@
#include <device/i2c_simple.h>
#include <gpio.h>
#include <soc/platform_descriptors.h>
-#include <soc/soc_util.h>
#include <types.h>
#define phx_mxm_dxio_descriptor { \