diff options
-rw-r--r-- | src/mainboard/google/brya/variants/pirrha/Makefile.inc | 2 | ||||
-rw-r--r-- | src/mainboard/google/brya/variants/pirrha/memory.c | 97 |
2 files changed, 99 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/variants/pirrha/Makefile.inc b/src/mainboard/google/brya/variants/pirrha/Makefile.inc index 8fe978f6ef..227b163fc8 100644 --- a/src/mainboard/google/brya/variants/pirrha/Makefile.inc +++ b/src/mainboard/google/brya/variants/pirrha/Makefile.inc @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only bootblock-y += gpio.c +romstage-y += memory.c + ramstage-y += gpio.c diff --git a/src/mainboard/google/brya/variants/pirrha/memory.c b/src/mainboard/google/brya/variants/pirrha/memory.c new file mode 100644 index 0000000000..d7f73fb9a0 --- /dev/null +++ b/src/mainboard/google/brya/variants/pirrha/memory.c @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <gpio.h> +#include <soc/romstage.h> +#include <boardid.h> + +static const struct mb_cfg variant_memcfg = { + .type = MEM_TYPE_LP5X, + + .rcomp = { + /* Baseboard uses only 100ohm Rcomp resistors */ + .resistor = 100, + }, + + /* DQ byte map */ + .lpx_dq_map = { + .ddr0 = { + .dq0 = { 15, 10, 8, 11, 14, 13, 9, 12 }, + .dq1 = { 3, 1, 2, 0, 7, 5, 4, 6 }, + }, + .ddr1 = { + .dq0 = { 7, 0, 3, 2, 1, 4, 6, 5 }, + .dq1 = { 12, 9, 8, 11, 10, 13, 15, 14 }, + }, + .ddr2 = { + .dq0 = { 2, 1, 3, 0, 4, 6, 5, 7 }, + .dq1 = { 8, 9, 10, 11, 13, 14, 12, 15 }, + }, + .ddr3 = { + .dq0 = { 3, 0, 1, 2, 5, 6, 4, 7 }, + .dq1 = { 13, 9, 11, 8, 14, 15, 10, 12 }, + }, + .ddr4 = { + .dq0 = { 15, 10, 8, 11, 14, 13, 9, 12 }, + .dq1 = { 3, 1, 2, 0, 7, 5, 4, 6 }, + }, + .ddr5 = { + .dq0 = { 7, 0, 3, 2, 1, 4, 6, 5 }, + .dq1 = { 12, 9, 8, 11, 10, 13, 15, 14 }, + }, + .ddr6 = { + .dq0 = { 2, 1, 3, 0, 4, 6, 5, 7 }, + .dq1 = { 8, 9, 10, 11, 13, 14, 12, 15 }, + }, + .ddr7 = { + .dq0 = { 3, 0, 1, 2, 5, 6, 4, 7 }, + .dq1 = { 13, 9, 11, 8, 14, 15, 10, 12 }, + }, + }, + + /* DQS CPU<>DRAM map */ + .lpx_dqs_map = { + .ddr0 = { .dqs0 = 1, .dqs1 = 0 }, + .ddr1 = { .dqs0 = 0, .dqs1 = 1 }, + .ddr2 = { .dqs0 = 0, .dqs1 = 1 }, + .ddr3 = { .dqs0 = 0, .dqs1 = 1 }, + .ddr4 = { .dqs0 = 1, .dqs1 = 0 }, + .ddr5 = { .dqs0 = 0, .dqs1 = 1 }, + .ddr6 = { .dqs0 = 0, .dqs1 = 1 }, + .ddr7 = { .dqs0 = 0, .dqs1 = 1 }, + }, + + .lp5x_config = { + .ccc_config = 0xff, + }, + + .ect = 1, /* Early Command Training */ + + .UserBd = BOARD_TYPE_MOBILE, +}; + +const struct mb_cfg *variant_memory_params(void) +{ + return &variant_memcfg; +} + +int variant_memory_sku(void) +{ + /* + * Memory configuration board straps + * GPIO_MEM_CONFIG_0 GPP_E1 + * GPIO_MEM_CONFIG_1 GPP_E2 + * GPIO_MEM_CONFIG_2 GPP_E3 + */ + gpio_t spd_gpios[] = { + GPP_E1, + GPP_E2, + GPP_E3, + }; + + if (board_id() == BOARD_ID_UNKNOWN) + return 0; + + return gpio_base2_value(spd_gpios, ARRAY_SIZE(spd_gpios)); +} |