diff options
| -rw-r--r-- | src/mainboard/google/brya/variants/anraggar/gpio.c | 6 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/anraggar/overridetree.cb | 11 |
2 files changed, 13 insertions, 4 deletions
diff --git a/src/mainboard/google/brya/variants/anraggar/gpio.c b/src/mainboard/google/brya/variants/anraggar/gpio.c index 6eac21a7a1..cdbb72fdaf 100644 --- a/src/mainboard/google/brya/variants/anraggar/gpio.c +++ b/src/mainboard/google/brya/variants/anraggar/gpio.c @@ -9,6 +9,8 @@ static const struct pad_config override_gpio_table[] = { /* A7 : NC ==> LTE_Present */ PAD_CFG_GPI(GPP_A7, NONE, DEEP), + /* A8 : GPP_A8 ==> WWAN_RF_DISABLE_ODL */ + PAD_CFG_GPO(GPP_A8, 1, DEEP), /* A18 : NC ==> HDMI_HPD_SRC*/ PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), @@ -80,8 +82,8 @@ static const struct pad_config early_gpio_table[] = { PAD_CFG_GPO(GPP_F11, 1, DEEP), /* F12 : GSXDOUT ==> WWAN_RST_L */ PAD_CFG_GPO(GPP_F12, 0, DEEP), - /* F16 : NC ==> WWAN_PWR_ENABLE */ - PAD_CFG_GPO(GPP_F16, 1, DEEP), + /* D6 : NC ==> WWAN_PWR_ENABLE */ + PAD_CFG_GPO(GPP_D6, 1, DEEP), /* H4 : I2C0_SDA ==> SOC_I2C_GSC_SDA */ PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), diff --git a/src/mainboard/google/brya/variants/anraggar/overridetree.cb b/src/mainboard/google/brya/variants/anraggar/overridetree.cb index 16da214332..defb8e6bba 100644 --- a/src/mainboard/google/brya/variants/anraggar/overridetree.cb +++ b/src/mainboard/google/brya/variants/anraggar/overridetree.cb @@ -409,7 +409,8 @@ chip soc/intel/alderlake [3] = USB2_PORT_MID(OC_SKIP), /* Type-A DB (6.2 inch) */ [4] = USB2_PORT_SHORT(OC_SKIP), /* LTE (3.3 inch) */ [5] = USB2_PORT_SHORT(OC_SKIP), /* UFC (3.7 inch) */ - [7] = USB2_PORT_SHORT(OC_SKIP), /* BT (2.5 inch) */ + [7] = USB2_PORT_SHORT(OC_SKIP), /* Bluetooth port for PCIe WLAN (2.5 inch) */ + [9] = USB2_PORT_SHORT(OC_SKIP), /* Bluetooth port for CNVi WLAN */ }" chip drivers/usb/acpi device ref xhci_root_hub on @@ -452,12 +453,18 @@ chip soc/intel/alderlake device ref usb2_port6 on end end chip drivers/usb/acpi - register "desc" = ""USB2 Bluetooth"" + register "desc" = ""PCIe Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" device ref usb2_port8 on end end chip drivers/usb/acpi + register "desc" = ""CNVi Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A0 (MLB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" |