diff options
4 files changed, 6 insertions, 6 deletions
diff --git a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb index 97bb69142d..1411a7c13d 100644 --- a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb @@ -29,7 +29,7 @@ chip soc/intel/apollolake # route, i.e., if this route changes then the affected GPE # offset bits also need to be changed. This sets the PMC register # GPE_CFG fields. - register "gpe0_dw1" = "PMC_GPE_NW_63_32" + register "gpe0_dw1" = "PMC_GPE_N_63_32" register "gpe0_dw2" = "PMC_GPE_N_95_64" register "gpe0_dw3" = "PMC_GPE_NW_31_0" @@ -117,6 +117,7 @@ chip soc/intel/apollolake device pci 12.0 off end # - SATA device pci 13.0 on chip drivers/intel/wifi + register "wake" = "GPE0_DW1_11" device pci 00.0 on end end end # - PCIe-A 0 Onboard M2 Slot(Wifi) diff --git a/src/mainboard/google/octopus/variants/baseboard/gpio.c b/src/mainboard/google/octopus/variants/baseboard/gpio.c index f839850a99..c7d8d3d0e4 100644 --- a/src/mainboard/google/octopus/variants/baseboard/gpio.c +++ b/src/mainboard/google/octopus/variants/baseboard/gpio.c @@ -166,8 +166,7 @@ static const struct pad_config gpio_table[] = { PAD_CFG_GPO(GPIO_116, 1, DEEP), /* WIFI_DISABLE_L */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_117, NONE, DEEP, NF1, TxDRxE, DISPUPD),/* PCIE_WAKE1_B */ PAD_CFG_GPIO_HI_Z(GPIO_118, NONE, DEEP, HIZCRx0, DISPUPD),/* PCIE_WAKE2_B -- unused */ - //TODO Reef uses PCIE_WAKE0 as GPI_SCI. Whats the difference? - PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_119, NONE, DEEP, NF1, TxDRxE, DISPUPD),/* PCIE_WAKE3_B */ + PAD_CFG_GPI_SCI_LOW(GPIO_119, NONE, DEEP, EDGE_SINGLE),/* PCIE_WAKE3_B */ /* PCIE_CLKREQ[0:3]_B */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_120, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PCIE_CLKREQ0_B -- unused*/ diff --git a/src/mainboard/google/octopus/variants/bip/devicetree.cb b/src/mainboard/google/octopus/variants/bip/devicetree.cb index 7520110ca7..277cb764f0 100644 --- a/src/mainboard/google/octopus/variants/bip/devicetree.cb +++ b/src/mainboard/google/octopus/variants/bip/devicetree.cb @@ -29,7 +29,7 @@ chip soc/intel/apollolake # route, i.e., if this route changes then the affected GPE # offset bits also need to be changed. This sets the PMC register # GPE_CFG fields. - register "gpe0_dw1" = "PMC_GPE_NW_63_32" + register "gpe0_dw1" = "PMC_GPE_N_63_32" register "gpe0_dw2" = "PMC_GPE_N_95_64" register "gpe0_dw3" = "PMC_GPE_NW_31_0" @@ -117,6 +117,7 @@ chip soc/intel/apollolake device pci 12.0 off end # - SATA device pci 13.0 on chip drivers/intel/wifi + register "wake" = "GPE0_DW1_11" device pci 00.0 on end end end # - PCIe-A 0 Onboard M2 Slot(Wifi) diff --git a/src/mainboard/google/octopus/variants/bip/gpio.c b/src/mainboard/google/octopus/variants/bip/gpio.c index e809ca2c61..d7396cac4b 100644 --- a/src/mainboard/google/octopus/variants/bip/gpio.c +++ b/src/mainboard/google/octopus/variants/bip/gpio.c @@ -164,8 +164,7 @@ static const struct pad_config gpio_table[] = { PAD_CFG_GPO(GPIO_116, 1, DEEP), /* WIFI_DISABLE_L */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_117, NONE, DEEP, NF1, TxDRxE, DISPUPD),/* PCIE_WAKE1_B */ PAD_CFG_GPIO_HI_Z(GPIO_118, NONE, DEEP, HIZCRx0, DISPUPD),/* PCIE_WAKE2_B -- unused */ - //TODO Reef uses PCIE_WAKE0 as GPI_SCI. Whats the difference? - PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_119, NONE, DEEP, NF1, TxDRxE, DISPUPD),/* PCIE_WAKE3_B */ + PAD_CFG_GPI_SCI_LOW(GPIO_119, NONE, DEEP, EDGE_SINGLE),/* PCIE_WAKE3_B */ /* PCIE_CLKREQ[0:3]_B */ PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_120, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PCIE_CLKREQ0_B -- unused*/ |