diff options
| -rwxr-xr-x | src/mainboard/google/cyan/devicetree.cb | 3 | ||||
| -rwxr-xr-x | src/mainboard/intel/strago/devicetree.cb | 3 | ||||
| -rw-r--r-- | src/soc/intel/braswell/chip.h | 8 | ||||
| -rw-r--r-- | src/soc/intel/braswell/include/soc/pm.h | 4 | ||||
| -rw-r--r-- | src/soc/intel/braswell/lpe.c | 24 |
5 files changed, 21 insertions, 21 deletions
diff --git a/src/mainboard/google/cyan/devicetree.cb b/src/mainboard/google/cyan/devicetree.cb index c36ae3d235..8932cf4391 100755 --- a/src/mainboard/google/cyan/devicetree.cb +++ b/src/mainboard/google/cyan/devicetree.cb @@ -72,8 +72,7 @@ chip soc/intel/braswell register "ISPPciDevConfig" = "3" # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock # Enable devices in ACPI mode register "lpss_acpi_mode" = "1" diff --git a/src/mainboard/intel/strago/devicetree.cb b/src/mainboard/intel/strago/devicetree.cb index c2aa47aa6e..2bca939dfa 100755 --- a/src/mainboard/intel/strago/devicetree.cb +++ b/src/mainboard/intel/strago/devicetree.cb @@ -72,8 +72,7 @@ chip soc/intel/braswell register "ISPPciDevConfig" = "3" # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock # Enable devices in ACPI mode register "lpss_acpi_mode" = "1" diff --git a/src/soc/intel/braswell/chip.h b/src/soc/intel/braswell/chip.h index 0f3c1d0220..6eb1451b2e 100644 --- a/src/soc/intel/braswell/chip.h +++ b/src/soc/intel/braswell/chip.h @@ -33,6 +33,11 @@ #define MEM_DDR3 0 #define MEM_LPDDR3 1 +enum lpe_clk_src { + LPE_CLK_SRC_XTAL, + LPE_CLK_SRC_PLL, +}; + struct soc_intel_braswell_config { uint8_t enable_xdp_tap; uint8_t clkreq_enable; @@ -41,8 +46,7 @@ struct soc_intel_braswell_config { int disable_slp_x_stretch_sus_fail; /* LPE Audio Clock configuration. */ - int lpe_codec_clk_freq; /* 19 or 25 are valid. */ - int lpe_codec_clk_num; /* Platform clock pins. [0:5] are valid. */ + enum lpe_clk_src lpe_codec_clk_src; /* 0=xtal 1=PLL, Both are 19.2Mhz. */ /* Native SD Card controller - override controller capabilities. */ uint32_t sdcard_cap_low; diff --git a/src/soc/intel/braswell/include/soc/pm.h b/src/soc/intel/braswell/include/soc/pm.h index 9e527e1b78..ec10101b5b 100644 --- a/src/soc/intel/braswell/include/soc/pm.h +++ b/src/soc/intel/braswell/include/soc/pm.h @@ -116,8 +116,8 @@ #define PLT_CLK_CTL_3 0x6c #define PLT_CLK_CTL_4 0x70 #define PLT_CLK_CTL_5 0x74 -# define CLK_FREQ_25MHZ (0x0 << 2) -# define CLK_FREQ_19P2MHZ (0x1 << 2) +# define CLK_SRC_XTAL (0x0 << 2) +# define CLK_SRC_PLL (0x1 << 2) # define CLK_CTL_D3_LPE (0x0 << 0) # define CLK_CTL_ON (0x1 << 0) # define CLK_CTL_OFF (0x2 << 0) diff --git a/src/soc/intel/braswell/lpe.c b/src/soc/intel/braswell/lpe.c index a1a7c64266..4662b4324e 100644 --- a/src/soc/intel/braswell/lpe.c +++ b/src/soc/intel/braswell/lpe.c @@ -96,32 +96,30 @@ static void setup_codec_clock(device_t dev) const char *freq_str; config = dev->chip_info; - switch (config->lpe_codec_clk_freq) { - case 19: - freq_str = "19.2"; - reg = CLK_FREQ_19P2MHZ; + switch (config->lpe_codec_clk_src) { + case LPE_CLK_SRC_XTAL: + /* XTAL driven bit2=0 */ + freq_str = "19.2MHz External Crystal"; + reg = CLK_SRC_XTAL; break; - case 25: - freq_str = "25"; - reg = CLK_FREQ_25MHZ; + case LPE_CLK_SRC_PLL: + /* PLL driven bit2=1 */ + freq_str = "19.2MHz PLL"; + reg = CLK_SRC_PLL; break; default: - printk(BIOS_DEBUG, "LPE codec clock not required.\n"); + reg = CLK_SRC_XTAL; + printk(BIOS_DEBUG, "LPE codec clock default to using Crystal\n"); return; } /* Default to always running. */ reg |= CLK_CTL_ON; - if (config->lpe_codec_clk_num < 0 || config->lpe_codec_clk_num > 5) { - printk(BIOS_DEBUG, "Invalid LPE codec clock number.\n"); - return; - } printk(BIOS_DEBUG, "LPE Audio codec clock set to %sMHz.\n", freq_str); clk_reg = (u32 *) (PMC_BASE_ADDRESS + PLT_CLK_CTL_0); - clk_reg += config->lpe_codec_clk_num; write32(clk_reg, (read32(clk_reg) & ~0x7) | reg); } |