summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/system76/lemp9/romstage.c35
1 files changed, 1 insertions, 34 deletions
diff --git a/src/mainboard/system76/lemp9/romstage.c b/src/mainboard/system76/lemp9/romstage.c
index 1af8ce6633..3b9c896f1b 100644
--- a/src/mainboard/system76/lemp9/romstage.c
+++ b/src/mainboard/system76/lemp9/romstage.c
@@ -17,46 +17,13 @@ static const struct cnl_mb_cfg memcfg = {
.spd[3] = {.read_type = NOT_EXISTING},
/*
- * For each channel, there are 3 sets of DQ byte mappings,
- * where each set has a package 0 and a package 1 value (package 0
- * represents the first 64-bit lpddr4 chip combination, and package 1
- * represents the second 64-bit lpddr4 chip combination).
- * The first three sets are for CLK, CMD, and CTL.
- * The fsp package actually expects 6 sets, but the last 3 sets are
- * not used in CNL, so we only define the three sets that are used
- * and let the meminit_lpddr4() routine take care of clearing the
- * unused fields for the caller.
- */
- .dq_map[DDR_CH0] = {
- {0x0F, 0xF0}, {0x00, 0xF0}, {0x0F, 0xF0},
- //{0x0F, 0x00}, {0xFF, 0x00}, {0xFF, 0x00}
- },
- .dq_map[DDR_CH1] = {
- {0x33, 0xCC}, {0x00, 0xCC}, {0x33, 0xCC},
- //{0x33, 0x00}, {0xFF, 0x00}, {0xFF, 0x00}
- },
-
- /*
- * DQS CPU<>DRAM map Ch0 and Ch1. Each array entry represents a
- * mapping of a dq bit on the CPU to the bit it's connected to on
- * the memory part. The array index represents the dqs bit number
- * on the memory part, and the values in the array represent which
- * pin on the CPU that DRAM pin connects to.
- */
- .dqs_map[DDR_CH0] = {0, 1, 2, 3, 4, 5, 6, 7},
- .dqs_map[DDR_CH1] = {1, 0, 2, 3, 4, 5, 6, 7},
-
- /*
* Rcomp resistor values. These values represent the resistance in
* ohms of the three rcomp resistors attached to the DDR_COMP_0,
* DDR_COMP_1, and DDR_COMP_2 pins on the DRAM.
*/
.rcomp_resistor = { 121, 81, 100 },
- /*
- * Rcomp target values. These will typically be the following
- * values for Cannon Lake : { 80, 40, 40, 40, 30 }
- */
+ /* Rcomp target values */
.rcomp_targets = { 100, 40, 20, 20, 26 },
/*