diff options
-rw-r--r-- | src/mainboard/technologic/ts5300/auto.c | 105 | ||||
-rw-r--r-- | src/mainboard/technologic/ts5300/debug.c | 128 | ||||
-rw-r--r-- | src/mainboard/technologic/ts5300/failover.c | 37 | ||||
-rw-r--r-- | src/mainboard/technologic/ts5300/irq_tables.c | 39 | ||||
-rw-r--r-- | targets/technologic/ts5300/Config-abuild.lb | 31 |
5 files changed, 172 insertions, 168 deletions
diff --git a/src/mainboard/technologic/ts5300/auto.c b/src/mainboard/technologic/ts5300/auto.c index 1ffc7ae415..294c802713 100644 --- a/src/mainboard/technologic/ts5300/auto.c +++ b/src/mainboard/technologic/ts5300/auto.c @@ -30,6 +30,8 @@ static void memreset(int controllers, const struct mem_controller *ctrl) { } + + static inline void activate_spd_rom(const struct mem_controller *ctrl) { /* nothing to do */ @@ -59,6 +61,102 @@ static inline void dumpmem(void){ } } + +static inline void irqinit(void){ + volatile unsigned char *cp; +#if 0 +/* these values taken from the msm board itself. + * and they cause the board to not even come out of calibrating_delay_loop + * if you can believe it. Our problem right now is no IDE or serial interrupts + * So we'll try to put interrupts in, one at a time. IDE first. + */ + cp = (volatile unsigned char *) 0xfffefd00; + *cp = 0x11; + cp = (volatile unsigned char *) 0xfffefd02; + *cp = 0x02; + cp = (volatile unsigned char *) 0xfffefd03; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd04; + *cp = 0xf7; + cp = (volatile unsigned char *) 0xfffefd08; + *cp = 0xf7; + cp = (volatile unsigned char *) 0xfffefd0a; + *cp = 0x8b; + cp = (volatile unsigned char *) 0xfffefd10; + *cp = 0x18; + cp = (volatile unsigned char *) 0xfffefd14; + *cp = 0x09; + cp = (volatile unsigned char *) 0xfffefd18; + *cp = 0x88; + cp = (volatile unsigned char *) 0xfffefd1a; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd1b; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd1c; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd20; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd21; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd22; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd28; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd29; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd30; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd31; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd32; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd33; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd40; + *cp = 0x10; + cp = (volatile unsigned char *) 0xfffefd41; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd42; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd43; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd44; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd45; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd46; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd50; + *cp = 0x37; + cp = (volatile unsigned char *) 0xfffefd51; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd52; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd53; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd54; + *cp = 0x37; + cp = (volatile unsigned char *) 0xfffefd55; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd56; + *cp = 0x37; + cp = (volatile unsigned char *) 0xfffefd57; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd58; + *cp = 0xff; + cp = (volatile unsigned char *) 0xfffefd59; + *cp = 0xff; + cp = (volatile unsigned char *) 0xfffefd5a; + *cp = 0xff; +#endif +#if 0 + /* this fails too */ + /* IDE only ... */ + cp = (volatile unsigned char *) 0xfffefd56; + *cp = 0xe; +#endif +} + static void main(unsigned long bist) { volatile int i; @@ -67,6 +165,7 @@ static void main(unsigned long bist) setupsc520(); + irqinit(); uart_init(); console_init(); for(i = 0; i < 100; i++) @@ -117,11 +216,11 @@ static void main(unsigned long bist) // Check 32MB of memory @ 0 ram_check(0x00000000, 0x02000000); #endif -#if 0 +#if 1 { - volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x70000; + volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x60000; volatile unsigned char *dst = (unsigned char *) 0x4000; - for(i = 0; i < 0x10000; i++) { + for(i = 0; i < 0x20000; i++) { /* print_err("Set dst "); print_err_hex32((unsigned long) dst); print_err(" to "); print_err_hex32(*src); print_err("\r\n"); diff --git a/src/mainboard/technologic/ts5300/debug.c b/src/mainboard/technologic/ts5300/debug.c index 714fcc5783..e69de29bb2 100644 --- a/src/mainboard/technologic/ts5300/debug.c +++ b/src/mainboard/technologic/ts5300/debug.c @@ -1,128 +0,0 @@ - -static void print_debug_pci_dev(unsigned dev) -{ - print_debug("PCI: "); - print_debug_hex8((dev >> 16) & 0xff); - print_debug_char(':'); - print_debug_hex8((dev >> 11) & 0x1f); - print_debug_char('.'); - print_debug_hex8((dev >> 8) & 7); -} - -static void print_pci_devices(void) -{ - device_t dev; - for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - print_debug_pci_dev(dev); - print_debug("\r\n"); - } -} - -static void dump_pci_device(unsigned dev) -{ - int i; - print_debug_pci_dev(dev); - print_debug("\r\n"); - - for(i = 0; i <= 255; i++) { - unsigned char val; - if ((i & 0x0f) == 0) { - print_debug_hex8(i); - print_debug_char(':'); - } - val = pci_read_config8(dev, i); - print_debug_char(' '); - print_debug_hex8(val); - if ((i & 0x0f) == 0x0f) { - print_debug("\r\n"); - } - } -} - -static void dump_pci_devices(void) -{ - device_t dev; - for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - dump_pci_device(dev); - } -} -#if 0 -static void dump_spd_registers(const struct mem_controller *ctrl) -{ - int i; - print_debug("\r\n"); - for(i = 0; i < 4; i++) { - unsigned device; - device = ctrl->channel0[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".0: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\r\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\r\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\r\n"); - } - device = ctrl->channel1[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".1: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\r\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\r\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\r\n"); - } - } -} -#endif diff --git a/src/mainboard/technologic/ts5300/failover.c b/src/mainboard/technologic/ts5300/failover.c index bd0df4e89d..bdcb9eaed2 100644 --- a/src/mainboard/technologic/ts5300/failover.c +++ b/src/mainboard/technologic/ts5300/failover.c @@ -5,25 +5,28 @@ #include <arch/io.h> #include "arch/romcc_io.h" #include "pc80/mc146818rtc_early.c" -#include "cpu/p6/boot_cpu.c" -static void main(void) +static unsigned long main(unsigned long bist) { - /* for now, just always assume failure */ - -#if 0 - /* Is this a cpu reset? */ - if (cpu_init_detected()) { - if (last_boot_normal()) { - asm("jmp __normal_image"); - } else { - asm("jmp __cpu_reset"); - } - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - asm("jmp __normal_image"); + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; } -#endif + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: + return bist; } diff --git a/src/mainboard/technologic/ts5300/irq_tables.c b/src/mainboard/technologic/ts5300/irq_tables.c index a2463b9e6b..4e7a1fe82e 100644 --- a/src/mainboard/technologic/ts5300/irq_tables.c +++ b/src/mainboard/technologic/ts5300/irq_tables.c @@ -1,29 +1,28 @@ -// This pirq table is dummy and only here for existance. -// It MUST be replaced as soon as LinuxBIOS is operable on this board. +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up + * + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ #include <arch/pirq_routing.h> const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*5, /* there can be total 5 devices on the bus */ - 0, /* Where the interrupt router lies (bus) */ - 0x88, /* Where the interrupt router lies (dev) */ - 0x1c20, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x8231, /* Device */ - 0, /* Crap (miniport) */ + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*7, /* there can be total 7 devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { - /* 8231 ethernet */ - {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0}, - /* 8231 internal */ - {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0}, - /* PCI slot */ - {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0}, - {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0}, - {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0}, + {0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0}, } }; unsigned long write_pirq_routing_table(unsigned long addr) diff --git a/targets/technologic/ts5300/Config-abuild.lb b/targets/technologic/ts5300/Config-abuild.lb new file mode 100644 index 0000000000..063918f1c1 --- /dev/null +++ b/targets/technologic/ts5300/Config-abuild.lb @@ -0,0 +1,31 @@ +target technologic_ts5300 +mainboard technologic/ts5300 + + + +option DEFAULT_CONSOLE_LOGLEVEL=10 +option MAXIMUM_CONSOLE_LOGLEVEL=10 +option CONFIG_COMPRESS=0 + +option CONFIG_CONSOLE_VGA=1 + +#romimage "normal" +# option USE_FALLBACK_IMAGE=0 +# option ROM_IMAGE_SIZE=0x10000 +# option LINUXBIOS_EXTRA_VERSION=".0Normal" +# payload /etc/hosts +#end + +romimage "fallback" + option FALLBACK_SIZE = 256 * 1024 +# option ROM_SIZE=512*1024 +# option ROM_SECTION_SIZE=512*1024 + option USE_FALLBACK_IMAGE=1 +# option ROM_IMAGE_SIZE=32 * 1024 # 0x8000 + option ROM_IMAGE_SIZE=128 * 1024 # 0x10000 +# option ROM_IMAGE_SIZE=512 * 1024 # 0x10000 + option LINUXBIOS_EXTRA_VERSION=".0Fallback" + payload /dev/null +end + +buildrom ./linuxbios.rom ROM_SIZE "fallback" |