diff options
| -rw-r--r-- | src/mainboard/google/brya/variants/omnigul/Makefile.inc | 6 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/omnigul/gpio.c | 319 |
2 files changed, 325 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/variants/omnigul/Makefile.inc b/src/mainboard/google/brya/variants/omnigul/Makefile.inc new file mode 100644 index 0000000000..d7d2ef7fa2 --- /dev/null +++ b/src/mainboard/google/brya/variants/omnigul/Makefile.inc @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +bootblock-y += gpio.c + +ramstage-y += gpio.c + +romstage-y += gpio.c diff --git a/src/mainboard/google/brya/variants/omnigul/gpio.c b/src/mainboard/google/brya/variants/omnigul/gpio.c new file mode 100644 index 0000000000..f65f8ab353 --- /dev/null +++ b/src/mainboard/google/brya/variants/omnigul/gpio.c @@ -0,0 +1,319 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> +#include <soc/gpio.h> + +/* Pad configuration in ramstage */ +static const struct pad_config override_gpio_table[] = { + /* A0 thru A5, A9 and A10 come configured out of reset, do not touch */ + /* A0 : ESPI_IO0 ==> ESPI_PCH_D0_EC_R */ + /* A1 : ESPI_IO1 ==> ESPI_PCH_D1_EC_R */ + /* A2 : ESPI_IO2 ==> ESPI_PCH_D2_EC_R */ + /* A3 : ESPI_IO3 ==> ESPI_PCH_D3_EC_R */ + /* A4 : ESPI_CS# ==> ESPI_PCH_CS_EC_R_L */ + /* A5 : ESPI_ALERT0# ==> NC */ + /* A6 : ESPI_ALERT1# ==> NC */ + PAD_NC(GPP_A6, NONE), + /* A7 : SRCCLK_OE7# ==> GPP_A7 */ + PAD_CFG_GPI(GPP_A7, NONE, DEEP), + /* A8 : SRCCLKREQ7# ==> NC */ + PAD_NC(GPP_A8, NONE), + /* A9 : ESPI_CLK ==> ESPI_PCH_CLK_R */ + /* A10 : ESPI_RESET# ==> ESPI_PCH_RST_EC_L */ + /* A11 : PMC_I2C_SDA ==> EN_SPKR_PA */ + /* A12 : SATAXPCIE1 ==> NC */ + PAD_NC(GPP_A12, NONE), + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + /* A14 : USB_OC1# ==> USB_C1_OC_ODL */ + /* A15 : USB_OC2# ==> NC */ + PAD_NC(GPP_A15, NONE), + /* A16 : USB_OC3# ==> USB_A0_OC_ODL */ + /* A17 : DISP_MISCC ==> EN_FCAM_PWR */ + /* A18 : DDSP_HPDB ==> HDMI_HPD */ + /* A19 : DDSP_HPD1 ==> NC */ + PAD_NC(GPP_A19, NONE), + /* A20 : DDSP_HPD2 ==> NC */ + PAD_NC(GPP_A20, NONE), + /* A21 : DDPC_CTRCLK ==> NC */ + PAD_NC(GPP_A21, NONE), + /* A22 : DDPC_CTRLDATA ==> NC */ + PAD_NC(GPP_A22, NONE), + /* A23 : ESPI_CS1# ==> AUD_HP_INT_L */ + + /* B0 : SOC_VID0 */ + /* B1 : SOC_VID1 */ + /* B2 : VRALERT# ==> NC */ + PAD_NC_LOCK(GPP_B2, NONE, LOCK_CONFIG), + /* B3 : PROC_GP2 ==> GPP_B3 */ + PAD_CFG_GPI_LOCK(GPP_B3, NONE, LOCK_CONFIG), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + /* B5 : ISH_I2C0_SDA ==> NC */ + PAD_NC_LOCK(GPP_B5, NONE, LOCK_CONFIG), + /* B6 : ISH_I2C0_SCL ==> NC */ + PAD_NC_LOCK(GPP_B6, NONE, LOCK_CONFIG), + /* B7 : ISH_12C1_SDA ==> PCH_I2C_TCHSCR_R_SDA */ + /* B8 : ISH_I2C1_SCL ==> PCH_I2C_TCHSCR_R_SCL */ + /* B9 : NC */ + /* B10 : NC */ + /* B11 : PMCALERT# ==> EN_PP3300_WLAN */ + /* B12 : SLP_S0# ==> SLP_S0_L */ + /* B13 : PLTRST# ==> PLT_RST_L */ + /* B14 : SPKR ==> GPP_B14_STRAP */ + /* B15 : TIME_SYNC0 ==> FP_USER_PRES_FP_L */ + /* B16 : I2C5_SDA ==> PCH_I2C_TCHPAD_SDA */ + /* B17 : I2C5_SCL ==> PCH_I2C_TCHPAD_SCL */ + /* B18 : ADR_COMPLETE ==> GPP_B18_STRAP */ + /* B19 : NC */ + /* B20 : NC */ + /* B21 : NC */ + /* B22 : NC */ + /* B23 : SML1ALERT# ==> PCHHOT_ODL_STRAP */ + + /* C0 : SMBCLK ==> EN_PP3300_TCHSCR */ + /* C1 : SMBDATA ==> USI_RST_L */ + /* C2 : SMBALERT# ==> GPP_C2_STRAP */ + /* C3 : SML0CLK ==> NC */ + PAD_NC(GPP_C3, NONE), + /* C4 : SML0DATA ==> NC */ + PAD_NC(GPP_C4, NONE), + /* C5 : SML0ALERT# ==> GPP_C5_BOOT_STRAP0 */ + /* C6 : SML1CLK ==> USI_REPORT_EN */ + /* C7 : SML1DATA ==> USI_INT */ + + /* D0 : ISH_GP0 ==> PCH_FP_BOOT0 */ + /* D1 : ISH_GP1 ==> FP_RST_ODL */ + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + /* D3 : ISH_GP3 ==> NC */ + PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG), + /* D4 : IMGCLKOUT0 ==> BT_DISABLE_L */ + /* D5 : SRCCLKREQ0# ==> GPP_D5 */ + PAD_CFG_GPI(GPP_D5, NONE, DEEP), + /* D6 : SRCCLKREQ1# ==> SSD_CLKREQ_ODL */ + /* D7 : SRCCLKREQ2# ==> WLAN_CLKREQ_ODL */ + /* D8 : SRCCLKREQ3# ==> GPP_D8 */ + PAD_CFG_GPI(GPP_D8, NONE, DEEP), + /* D9 : ISH_SPI_CS# ==> NC */ + PAD_NC_LOCK(GPP_D9, NONE, LOCK_CONFIG), + /* D10 : ISH_SPI_CLK ==> GPP_D10_STRAP */ + PAD_NC_LOCK(GPP_D10, NONE, LOCK_CONFIG), + /* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */ + /* D12 : ISH_SPI_MOSI ==> GPP_D12_STRAP */ + /* D13 : ISH_UART0_RXD ==> GPP_D13 */ + PAD_CFG_GPI_LOCK(GPP_D13, NONE, LOCK_CONFIG), + /* D14 : ISH_UART0_TXD ==> NC */ + PAD_NC_LOCK(GPP_D14, NONE, LOCK_CONFIG), + /* D15 : ISH_UART0_RTS# ==> GPP_D15 */ + PAD_CFG_GPI_LOCK(GPP_D15, NONE, LOCK_CONFIG), + /* D16 : ISH_UART0_CTS# ==> GPP_D16 */ + PAD_CFG_GPI_LOCK(GPP_D16, NONE, LOCK_CONFIG), + /* D17 : UART1_RXD ==> GPP_D17 */ + PAD_CFG_GPI_LOCK(GPP_D17, NONE, LOCK_CONFIG), + /* D18 : UART1_TXD ==> NC */ + PAD_NC_LOCK(GPP_D18, NONE, LOCK_CONFIG), + /* D19 : I2S_MCLK1_OUT ==> I2S_MCLK_R */ + + /* E0 : SATAXPCIE0 ==> NC */ + PAD_NC(GPP_E0, NONE), + /* E1 : THC0_SPI1_IO2 ==> MEM_STRAP_2 */ + /* E2 : THC0_SPI1_IO3 ==> MEM_STRAP_1 */ + /* E3 : PROC_GP0 ==> GPP_E3 */ + PAD_CFG_GPI(GPP_E3, NONE, DEEP), + /* E4 : SATA_DEVSLP0 ==> NC */ + PAD_NC(GPP_E4, NONE), + /* E5 : SATA_DEVSLP1 ==> USB_A0_RT_RST_ODL */ + /* E6 : THC0_SPI1_RST# ==> GPPE6_STRAP */ + /* E7 : PROC_GP1 ==> GPP_E7 */ + PAD_CFG_GPI(GPP_E7, NONE, DEEP), + /* E8 : SLP_DRAM# ==> WIFI_DISABLE_L */ + /* E9 : USB_OC0# ==> USB_C0_OC_ODL */ + /* E10 : THC0_SPI1_CS# ==> GPP_E10 */ + PAD_CFG_GPI_LOCK(GPP_E10, NONE, LOCK_CONFIG), + /* E11 : THC0_SPI1_CLK ==> MEM_STRAP_0 */ + /* E12 : THC0_SPI1_IO1 ==> MEM_STRAP_3 */ + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + /* E14 : DDSP_HPDA ==> SOC_EDP_HPD */ + /* E15 : RSVD_TP ==> PCH_WP_OD */ + /* E16 : RSVD_TP ==> NC */ + PAD_NC(GPP_E16, NONE), + /* E17 : THC0_SPI1_INT# ==> GPP_E17 */ + PAD_CFG_GPI_LOCK(GPP_E17, NONE, LOCK_CONFIG), + /* E18 : DDP1_CTRLCLK ==> NC */ + PAD_NC(GPP_E18, NONE), + /* E19 : DDP1_CTRLDATA ==> GPP_E19_STRAP */ + PAD_CFG_GPI(GPP_E19, NONE, DEEP), + /* E20 : DDP2_CTRLCLK ==> NC */ + PAD_NC(GPP_E20, NONE), + /* E21 : DDP2_CTRLDATA ==> USB_C1_LSX_SOC_RX_STRAP */ + /* E22 : DDPA_CTRLCLK ==> USB_C0_AUX_DC_STRAP_P */ + /* E23 : DDPA_CTRLDATA ==> USB_C0_AUX_DC_N */ + + /* F0 : CNV_BRI_DT ==> CNV_BRI_DT_STRAP */ + /* F1 : CNV_BRI_RSP ==> CNV_BRI_RSP */ + /* F2 : CNV_RGI_DT ==> CNV_RGI_DT_STRAP */ + /* F3 : CNV_RGI_RSP ==> CNV_RGI_RSP */ + /* F4 : CNV_RF_RESET# ==> CNV_RF_RST_L */ + /* F5 : MODEM_CLKREQ ==> CNV_CLKREQ0 */ + /* F6 : CNV_PA_BLANKING ==> NC */ + PAD_NC(GPP_F6, NONE), + /* F7 : GPPF7_STRAP */ + /* F8 : NC */ + /* F9 : BOOTMPC ==> SLP_S0_GATE_R */ + /* F10 : GPPF10_STRAP */ + /* F11 : THC1_SPI2_CLK ==> GSPI_PCH_CLK_FPMCU_R */ + /* F12 : GSXDOUT ==> GSPI_PCH_DO_FPMCU_DI_R */ + /* F13 : GSXDOUT ==> GSPI_PCH_DI_FPMCU_DO */ + /* F14 : GSXDIN ==> TCHPAD_INT_ODL */ + /* F15 : GSXSRESET# ==> FPMCU_INT_L */ + /* F16 : GSXCLK ==> GSPI_PCH_CS_FPMCU_R_L */ + /* F17 : THC1_SPI2_RST# ==> EC_PCH_INT_ODL */ + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + /* F19 : SRCCLKREQ6# ==> NC */ + PAD_NC(GPP_F19, NONE), + /* F20 : EXT_PWR_GATE# ==> NC */ + PAD_NC(GPP_F20, NONE), + /* F21 : EXT_PWR_GATE2# ==> GPP_F21 */ + PAD_CFG_GPI(GPP_F21, NONE, DEEP), + /* F22 : NC ==> GPP_F22 */ + /* F23 : V1P05_CTRL ==> V1P05EXT_CTRL */ + PAD_CFG_NF(GPP_F23, NONE, DEEP, NF1), + + /* H0 : GPPH0_BOOT_STRAP1 */ + /* H1 : GPPH1_BOOT_STRAP2 */ + /* H2 : GPPH2_BOOT_STRAP3 */ + /* H3 : SX_EXIT_HOLDOFF# ==> WLAN_PCIE_WAKE_ODL */ + /* H4 : I2C0_SDA ==> PCH_I2C_AUD_SDA */ + /* H5 : I2C0_SCL ==> PCH_I2C_AUD_SCL */ + /* H6 : I2C1_SDA ==> PCH_I2C_TPM_SDA */ + /* H7 : I2C1_SCL ==> PCH_I2C_TPM_SCL */ + /* H8 : I2C4_SDA ==> NC */ + PAD_NC(GPP_H8, NONE), + /* H9 : I2C4_SCL ==> NC */ + PAD_NC(GPP_H9, NONE), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + /* H11 : UART0_RXD ==> UART_PCH_TX_DBG_RX */ + /* H12 : I2C7_SDA ==> GPP_H12 */ + PAD_CFG_GPI_LOCK(GPP_H12, NONE, LOCK_CONFIG), + /* H13 : I2C7_SCL ==> NC */ + PAD_NC_LOCK(GPP_H13, NONE, LOCK_CONFIG), + /* H14 : NC */ + /* H15 : DDPB_CTRLCLK ==> DDIB_HDMI_CTRLCLK */ + /* H16 : NC */ + /* H17 : DDPB_CTRLDATA ==> DDIB_HDMI_CTRLDATA */ + /* H18 : PROC_C10_GATE# ==> CPU_C10_GATE_L */ + /* H19 : SRCCLKREQ4# ==> GPP_H19 */ + PAD_CFG_GPI(GPP_H19, NONE, DEEP), + /* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */ + /* H21 : IMGCLKOUT2 ==> NC */ + PAD_NC(GPP_H21, NONE), + /* H22 : IMGCLKOUT3 ==> NC */ + PAD_NC(GPP_H22, NONE), + /* H23 : SRCCLKREQ5# ==> GPP_H23 */ + PAD_CFG_GPI(GPP_H23, NONE, DEEP), + + /* R0 : HDA_BCLK ==> I2S_HP_SCLK_R */ + /* R1 : HDA_SYNC ==> I2S_HP_SFRM_R */ + /* R2 : HDA_SDO ==> I2S_PCH_TX_HP_RX_STRAP */ + /* R3 : HDA_SDIO ==> I2S_PCH_RX_HP_TX */ + /* R4 : HDA_RST# ==> DMIC_CLK1_R */ + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), + /* R5 : HDA_SDI1 ==> DMIC_DATA1_R */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), + /* R6 : I2S2_TXD ==> DMIC_CLK0_R */ + PAD_CFG_NF(GPP_R6, NONE, DEEP, NF3), + /* R7 : I2S2_RXD ==> DMIC_DATA0_R */ + PAD_CFG_NF(GPP_R7, NONE, DEEP, NF3), + + /* S0 : SNDW0_CLK ==> I2S_SPKR_SCLK_R */ + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), + /* S1 : SNDW0_DATA ==> I2S_SPKR_SFRM_R */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), + /* S2 : SNDW1_CLK ==> I2S_PCH_TX_SPKR_RX_R */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), + /* S3 : SNDW1_DATA ==> I2S_PCH_RX_SPKR_TX */ + PAD_NC(GPP_S3, NONE), + /* S4 : SNDW2_CLK ==> NC */ + PAD_NC(GPP_S4, NONE), + /* S5 : SNDW2_DATA ==> NC */ + PAD_NC(GPP_S5, NONE), + /* S6 : SNDW3_CLK ==> NC */ + PAD_NC(GPP_S6, NONE), + /* S7 : SNDW3_DATA ==> NC */ + PAD_NC(GPP_S7, NONE), + + /* GPD0: BATLOW# ==> BATLOW_L */ + /* GPD1: ACPRESENT ==> PCH_ACPRESENT */ + /* GPD2 : LAN_WAKE# ==> EC_PCH_WAKE_ODL */ + /* GPD3: PWRBTN# ==> EC_PCH_PWR_BTN_ODL */ + /* GPD4: SLP_S3# ==> SLP_S3_R_L */ + /* GPD5: SLP_S4# ==> SLP_S4_L */ + /* GPD6: SLP_A# ==> SLP_A_L_CAP_SITE */ + /* GPD7: GPD7_STRAP */ + /* GPD8: SUSCLK ==> PCH_SUSCLK */ + /* GPD9: SLP_WLAN# ==> SLP_WLAN_L */ + /* GPD10: SLP_S5# ==> SLP_S5_L */ + /* GPD11: LANPHYC ==> GPD11 */ + PAD_NC(GPD11, NONE), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 0, DEEP), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down. + * To ensure proper power sequencing for the FPMCU device, reset signal is driven low + * early on in bootblock, followed by enabling of power. Reset signal is deasserted + * later on in ramstage. Since reset signal is asserted in bootblock, it results in + * FPMCU not working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* D11 : SATAXPCIE1 ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_D11, 1, DEEP), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER_LOCK(GPP_E15, NONE, LOCK_CONFIG), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI_LOCK(GPP_F18, NONE, LOCK_CONFIG), + /* H6 : I2C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : I2C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), +}; + +static const struct pad_config romstage_gpio_table[] = { + /* + * B4 : PROC_GP3 ==> SSD_PERST_L + * B4 is programmed here so that it is sequenced after EN_PP3300_SSD. + */ + PAD_CFG_GPO(GPP_B4, 1, DEEP), +}; + +const struct pad_config *variant_gpio_override_table(size_t *num) +{ + *num = ARRAY_SIZE(override_gpio_table); + return override_gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +const struct pad_config *variant_romstage_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(romstage_gpio_table); + return romstage_gpio_table; +} |