diff options
| -rw-r--r-- | src/cpu/x86/lapic/lapic_cpu_init.c | 29 |
1 files changed, 25 insertions, 4 deletions
diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index fc22ea4adf..2e2bb0632c 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -277,6 +277,19 @@ int start_cpu(device_t cpu) } #if CONFIG_AP_IN_SIPI_WAIT == 1 + +/** + * Sending INIT IPI to self is equivalent of asserting #INIT with a bit of delay. + * An undefined number of instruction cycles will complete. All global locks + * must be released before INIT IPI and no printk is allowed after this. + * De-asserting INIT IPI is a no-op on later Intel CPUs. + * + * If you set DEBUG_HALT_SELF to 1, printk's after INIT IPI are enabled + * but running thread may halt without releasing the lock and effectively + * deadlock other CPUs. + */ +#define DEBUG_HALT_SELF 0 + /** * Normally this function is defined in lapic.h as an always inline function * that just keeps the CPU in a hlt() loop. This does not work on all CPUs. @@ -298,38 +311,46 @@ void stop_this_cpu(void) lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT | LAPIC_DM_INIT); /* wait for the ipi send to finish */ -#if 0 - // When these two printk(BIOS_SPEW, ...) calls are not removed, the - // machine will hang when log level is SPEW. Why? +#if DEBUG_HALT_SELF printk(BIOS_SPEW, "Waiting for send to finish...\n"); #endif timeout = 0; do { -#if 0 +#if DEBUG_HALT_SELF printk(BIOS_SPEW, "+"); #endif udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { +#if DEBUG_HALT_SELF printk(BIOS_ERR, "timed out\n"); +#endif } mdelay(10); +#if DEBUG_HALT_SELF printk(BIOS_SPEW, "Deasserting INIT.\n"); +#endif /* Deassert the LAPIC INIT */ lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); +#if DEBUG_HALT_SELF printk(BIOS_SPEW, "Waiting for send to finish...\n"); +#endif timeout = 0; do { +#if DEBUG_HALT_SELF printk(BIOS_SPEW, "+"); +#endif udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { +#if DEBUG_HALT_SELF printk(BIOS_ERR, "timed out\n"); +#endif } while(1) { |