diff options
32 files changed, 7286 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/CxlNodeHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/CxlNodeHob.h new file mode 100644 index 0000000000..42b5cc20d5 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/CxlNodeHob.h @@ -0,0 +1,94 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _CXL_NODE_HOB_ +#define _CXL_NODE_HOB_ + +#define CXL_NODE_HOB_GUID { 0xdd8ae009, 0xda5a, 0x44a3, { 0xbe, 0x18, 0xda, 0x0c, 0x16, 0xc5, 0xaf, 0x5c } } + +#ifndef MAX_CXL_HDM_RANGES +#define MAX_CXL_HDM_RANGES 0x2 // Maximum number of CXL HDM ranges per CXL end device. +#endif + +#ifndef MAX_CXL_PER_SOCKET +#define MAX_CXL_PER_SOCKET 8 +#endif + +#define CXL_NODE_ATTR_MEM BIT0 +#define CXL_NODE_ATTR_PERSISTENT BIT1 +#define CXL_NODE_ATTR_MEM_HW_INIT BIT2 +#define CXL_NODE_ATTR_ACCELERATOR BIT3 + +typedef UINT32 CXL_NODE_ATTR; + +#pragma pack(1) + +// +// CDAT DSEMTS EFI Memory Type and Attribute +// +typedef enum { + CxlEfiConventionalMemory = 0x0, + CxlEfiConventionalMemorySp = 0x1, + CxlEfiReservedMemoryType = 0x2, + MaxCxlEfiMemType +} CXL_EFI_MEM_TYPE; + +typedef struct { + UINT32 RdLatency; + UINT32 WrLatency; + UINT32 RdBandwidth; + UINT32 WrBandwidth; +} CXL_PERF_DATA; + +typedef struct { + UINT64 SerialNumber; + UINT16 VendorId; + CXL_NODE_ATTR Attr; + UINT32 Address; + UINT32 Size; + UINT8 Ways; + UINT8 SocketBitmap; + CXL_EFI_MEM_TYPE EfiMemType; + CXL_PERF_DATA InitiatorPerfData; // Performance data between device egress and initiator. + CXL_PERF_DATA TargetPerfData; // Performance data of entire target memory region. + CXL_PERF_DATA InitiatorTargetPerfData; // performance data between initiator and the device memory. +} CXL_NODE_INFO; + +typedef struct { + UINT8 CxlNodeCount; + // + // CXL node info for UEFI memory map and ACPI tables construction + // + CXL_NODE_INFO CxlNodeInfo[MAX_CXL_PER_SOCKET * MAX_CXL_HDM_RANGES]; +} CXL_NODE_SOCKET; + +#pragma pack() + +#endif //#ifndef _CXL_NODE_HOB_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/EnhancedWarningLogLib.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/EnhancedWarningLogLib.h new file mode 100644 index 0000000000..7c54749304 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/EnhancedWarningLogLib.h @@ -0,0 +1,169 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _ENHANCED_WARNING_LOG_LIB_ +#define _ENHANCED_WARNING_LOG_LIB_ + +#define FSP_RESERVED_LEN 12 + +#pragma pack(1) + +/// +/// Enhanced Warning Log Header +/// +typedef struct { + EFI_GUID EwlGuid; /// GUID that uniquely identifies the EWL revision + UINT32 Size; /// Total size in bytes including the header and buffer + UINT32 FreeOffset; /// Offset of the beginning of the free space from byte 0 + /// of the buffer immediately following this structure + /// Can be used to determine if buffer has sufficient space for next entry + UINT32 Crc; /// 32-bit CRC generated over the whole size minus this crc field + /// Note: UEFI 32-bit CRC implementation (CalculateCrc32) (References [7]) + /// Consumers can ignore CRC check if not needed. + UINT32 Reserved; /// Reserved for future use, must be initialized to 0 +} EWL_HEADER; + +/// +/// List of all entry types supported by this revision of EWL +/// +typedef enum { + EwlType0 = 0, + EwlType1 = 1, + EwlType2 = 2, + EwlType3 = 3, + EwlType4 = 4, + EwlType5 = 5, + EwlType6 = 6, + EwlType7 = 7, + EwlType8 = 8, + EwlType9 = 9, + EwlType10 = 10, + EwlType11 = 11, + EwlType12 = 12, + EwlType13 = 13, + EwlType14 = 14, + EwlType15 = 15, + EwlType16 = 16, + EwlType17 = 17, + EwlType18 = 18, + EwlType19 = 19, + EwlType20 = 20, + EwlType21 = 21, + EwlType22 = 22, + EwlType23 = 23, + EwlType24 = 24, + EwlType25 = 25, + EwlType26 = 26, + EwlType27 = 27, + EwlType28 = 28, + EwlType29 = 29, + EwlType30 = 30, + EwlType31 = 31, + EwlType32 = 32, + EwlTypeMax, + EwlTypeOem = 0x8000, + EwlTypeDelim = MAX_INT32 +} EWL_TYPE; + +/// +/// EWL severities +/// +typedef enum { + EwlSeverityInfo, + EwlSeverityWarning, + EwlSeverityFatal, + EwlSeverityMax, + EwlSeverityDelim = MAX_INT32 +} EWL_SEVERITY; + + +/// +/// Generic entry header for parsing the log +/// +typedef struct { + EWL_TYPE Type; + UINT16 Size; /// Entries will be packed by byte in contiguous space + EWL_SEVERITY Severity; /// Warning, error, informational, this may be extended in the future +} EWL_ENTRY_HEADER; + +/// +/// Legacy content provides context of the warning +/// +typedef struct { + UINT8 MajorCheckpoint; // EWL Spec - Appendix B + UINT8 MinorCheckpoint; + UINT8 MajorWarningCode; // EWL Spec - Appendix A + UINT8 MinorWarningCode; +} EWL_ENTRY_CONTEXT; + +/// +/// Legacy content to specify memory location +/// +typedef struct { + UINT8 Socket; /// 0xFF = n/a + UINT8 Channel; /// 0xFF = n/a + UINT8 PseudoChannel; /// 0xFF = n/a + UINT8 Dimm; /// 0xFF = n/a + UINT8 Rank; /// 0xFF = n/a +} EWL_ENTRY_MEMORY_LOCATION; + +/// +/// Type 3 = Enhanced type for command, control IO errors +/// +typedef struct { + EWL_ENTRY_HEADER Header; + EWL_ENTRY_CONTEXT Context; + EWL_ENTRY_MEMORY_LOCATION MemoryLocation; + UINT8 reserved1[FSP_RESERVED_LEN]; // MRC_LT Level; MRC_GT Group; GSM_CSN Signal; + UINT8 EyeSize; // 0xFF = n/a +} EWL_ENTRY_TYPE3; + +#pragma pack() + +/// +/// Enhanced Warning Log Spec defined data log structure +/// +typedef struct { + EWL_HEADER Header; /// The size will vary by implementation and should not be assumed + UINT8 Buffer[4 * 1024]; /// The spec requirement is that the buffer follow the header +} EWL_PUBLIC_DATA; + +/// +/// EWL private data structure. This is going to be implementation dependent +/// When we separate OEM hooks via a PPI, we can remove this +/// +typedef struct { + UINT32 bufSizeOverflow; // Number of bytes that could not be added to buffer + UINT32 numEntries; // Number of entries currently logged + EWL_PUBLIC_DATA status; // Spec defined EWL +} EWL_PRIVATE_DATA; + + +#endif // #ifndef _ENHANCED_WARNING_LOG_LIB_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FirmwareVersionInfoHob.h new file mode 100644 index 0000000000..5d09dd2d18 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FirmwareVersionInfoHob.h @@ -0,0 +1,59 @@ +/** @file + Header file for Firmware Version Information + @copyright + Copyright (c) 2015 - 2021, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent +**/ + +#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ +#define _FIRMWARE_VERSION_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> + +#pragma pack(1) +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} FIRMWARE_VERSION; + +/// +/// Firmware Version Information Structure +/// +typedef struct { + UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name + UINT8 VersionStringIndex; ///< Offset 1 Index of Version String + FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version +} FIRMWARE_VERSION_INFO; + +#ifndef __SMBIOS_STANDARD_H__ +/// +/// The Smbios structure header. +/// +typedef struct { + UINT8 Type; + UINT8 Length; + UINT16 Handle; +} SMBIOS_STRUCTURE; +#endif + +/// +/// Firmware Version Information HOB Structure +/// +typedef struct { + EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB + SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB + UINT8 Count; ///< Offset 28 Number of FVI elements included. +/// +/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer +/// +} FIRMWARE_VERSION_INFO_HOB; +#pragma pack() + +#endif // _FIRMWARE_VERSION_INFO_HOB_H_
\ No newline at end of file diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspAcpiHobs.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspAcpiHobs.h new file mode 100644 index 0000000000..7338538e13 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspAcpiHobs.h @@ -0,0 +1,34 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _FSP_ACPI_HOBS_H_ +#define _FSP_ACPI_HOBS_H_ + +#endif //#ifndef _FSP_ACPI_HOBS_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspEas.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspEas.h new file mode 100644 index 0000000000..f99c3bc36b --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspEas.h @@ -0,0 +1,17 @@ +/** @file + Intel FSP definition from Intel Firmware Support Package External + Architecture Specification v2.2. + @copyright + Copyright (c) 2015 - 2021, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent +**/ + +#ifndef _FSP_EAS_H_ +#define _FSP_EAS_H_ + +#include <Uefi.h> +#include <Guid/GuidHobFspEas.h> +#include <Guid/FspHeaderFile.h> +#include <FspEas/FspApi.h> + +#endif // _FSP_EAS_H_
\ No newline at end of file diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspErrorInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspErrorInfoHob.h new file mode 100644 index 0000000000..ecc2d6fdf7 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspErrorInfoHob.h @@ -0,0 +1,84 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _FSP_ERROR_INFO_HOB_H_ +#define _FSP_ERROR_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> +#include <Pi/PiStatusCode.h> + +#define FSP_ERROR_INFO_HOB_GUID { 0x611e6a88, 0xadb7, 0x4301, { 0x93, 0xff, 0xe4, 0x73, 0x04, 0xb4, 0x3d, 0xa6 }} + +#pragma pack(1) + +typedef struct { + /// + /// GUID HOB header. + /// + EFI_HOB_GUID_TYPE GuidHob; + + /// + /// ReportStatusCode () type identifier. + /// + EFI_STATUS_CODE_TYPE Type; + + /// + /// ReportStatusCode () value. + /// + EFI_STATUS_CODE_VALUE Value; + + /// + /// ReportStatusCode () Instance number. + /// + UINT32 Instance; + + /// + /// Optional GUID which may be used to identify + /// which internal component of the FSP was + /// executing at the time of the error. + /// + EFI_GUID CallerId; + + /// + /// GUID identifying the nature of the fatal error. + /// + EFI_GUID ErrorType; + + /// + /// EFI_STATUS code describing the error encountered. + /// + UINT32 Status; +} FSP_ERROR_INFO_HOB; + +#pragma pack() + +#endif //#ifndef _FSP_ERROR_INFO_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspUpd.h new file mode 100644 index 0000000000..d90f785578 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspUpd.h @@ -0,0 +1,50 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F445055525053 /* 'SPRUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F445055525053 /* 'SPRUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F445055525053 /* 'SPRUPD_S' */ + +#define FSPI_UPD_SIGNATURE 0x495F445055524E47 /* 'GNRUPD_I' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspiUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspiUpd.h new file mode 100644 index 0000000000..93ca55839f --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspiUpd.h @@ -0,0 +1,69 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPI_UPD_H__ +#define __FSPI_UPD_H__ + +#include <FspUpd.h> + +#define FSP_RAS_ACPI_HOB_GUID { 0x826785ee, 0xa8e0, 0x4d8f, { 0x82, 0x6f, 0x54, 0x29, 0x2c, 0xe7, 0x6f, 0xe6 } }; + +#pragma pack(1) + +typedef struct { + +/** N/A +**/ + UINT8 ReservedSiliconInitUpd[16]; + +} FSPI_CONFIG; + + +typedef struct { + +/** N/A +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** N/A +**/ + FSPI_CONFIG FspiConfig; + +/** N/A +**/ + UINT16 UpdTerminator; + +} FSPI_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspmUpd.h new file mode 100644 index 0000000000..c0f09df54d --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspmUpd.h @@ -0,0 +1,1323 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Customer Revision + The Customer can set this revision string for their own purpose. +**/ + UINT8 CustomerRevision[32]; + +/** Offset 0x0060 - Bus Ratio + Indicates the ratio of Bus/MMIOL/IO resource to be allocated for each CPU's IIO +**/ + UINT8 BusRatio[8]; + +/** Offset 0x0068 - D2K Credit Config + Set the D2K Credit Config - 1: Min, <b>2: Med(Default)</b>, 3: Max. + 1:Min, 2:Med, 3:Max +**/ + UINT8 D2KCreditConfig; + +/** Offset 0x0069 - Snoop Throttle Config + Set the Snoop Throttle Config - <b>0: DIS(Default)</b>, 1: Min, 2: Med, 3: Max. + 0:DIS, 1:Min, 2:Med, 3:Max +**/ + UINT8 SnoopThrottleConfig; + +/** Offset 0x006A - Legacy VGA Soc + Socket that claims the legacy VGA range +**/ + UINT8 LegacyVgaSoc; + +/** Offset 0x006B - Legacy VGA Stack + Stack that claims the legacy VGA range +**/ + UINT8 LegacyVgaStack; + +/** Offset 0x006C - Pcie P2P Performance Mode + Determine if to enable PCIe P2P Performance Mode - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 P2pRelaxedOrdering; + +/** Offset 0x006D - UPI Debug Print Level + UPI Debug Print Level Bitmask - 0: Disable, 1: Fatal, 2: Warning, 4: Summary, 8: + Detail, <b>0x0F: All(Default)</b>. + 1:Fatal, 2:Warning, 4:Summary, 8:Detail, 0x0F:All +**/ + UINT8 DebugPrintLevel; + +/** Offset 0x006E - NumaEn + NumaEn - <b>1: Enable Numa(Default)</b>, 0: Disable Numa. + 0:Disable, 1:Enable +**/ + UINT8 NumaEn; + +/** Offset 0x006F - SNC + Enable or Disable SNC - 0: Disable, 2: Snc2, 4: Snc4, <b>0x0F: Auto(Default)</b>. + 0: Disable, 2: Snc2, 4: Snc4, 0x0F: Auto +**/ + UINT8 SncEn; + +/** Offset 0x0070 - UMA Clustering + Set UMA Clusters - 0: Disable, 2: Two Clusters, <b>4: Four Clusters(Default)</b>. + 0:Disable, 2:Two Clusters, 4:Four Clusters +**/ + UINT8 UmaClustering; + +/** Offset 0x0071 - IODC Mode + IODC Mode - 0: Disable, <b>1: Auto(Default)</b>, 2: Push, 3: AllocFlow, 4: NonAlloc, + 5: WCILF. + 0:Disable, 1:Auto, 2:Push, 3:AllocFlow, 4:NonAlloc, 5:WCILF +**/ + UINT8 IoDcMode; + +/** Offset 0x0072 - Degrade Precedence + Setup Degrade Precedence - <b>0: Topology(Default)</b>, 1: Feature. + 0:Topology, 1:Feature +**/ + UINT8 DegradePrecedence; + +/** Offset 0x0073 - Degrade 4 Socket Preference + Setup Degrade 4 Socket Preference - <b>0: Fully Connect(Default)</b>, 1: Dual Link Ring. + 0:Fully Connect, 1:Dual Link Ring +**/ + UINT8 Degrade4SPreference; + +/** Offset 0x0074 - Directory Mode + Enable or Disable Directory Mode - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 DirectoryModeEn; + +/** Offset 0x0075 - XPT Prefetch Enable + Enable or Disable XPT Prefetch - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 XptPrefetchEn; + +/** Offset 0x0076 - KTI Prefetch Enable + Enable or Disable KTI Prefetch - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 KtiPrefetchEn; + +/** Offset 0x0077 - XPT Remote Prefetch Enable + Enable or Disable XPT Remote Prefetch Enable - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 XptRemotePrefetchEn; + +/** Offset 0x0078 - KTI FPGA + Enable or Disable KTI FPGA +**/ + UINT8 KtiFpgaEnable[8]; + +/** Offset 0x0080 - DDRT QoS Mode + DDRT QoS - <b>0: Mode 0(Default)</b>, 1: Mode 1, 2: Mode 2. + 0:Mode 0, 1:Mode 1, 2:Mode 2 +**/ + UINT8 DdrtQosMode; + +/** Offset 0x0081 - KTI Link Speed Mode + Choose KTI Link Speed Mode - 0: Slow, <b>1: Full(Default)</b>. + 0:Slow, 1:Full +**/ + UINT8 KtiLinkSpeedMode; + +/** Offset 0x0082 - KTI Link Speed + Setup KTI Link Speed - 0: 128GT, 1: 144GT, 2: 160GT, 3: 200GT, <b>0x7F: Max KTI + Link Speed (Default)</b>, 0x8F: Frequency Per Link. + 0:128GT, 1:144GT, 2:160GT, 3:200GT, 0x7F:Max KTI Link Speed, 0x8F:Frequency Per Link +**/ + UINT8 KtiLinkSpeed; + +/** Offset 0x0083 - KTI Link L0p + Enable or Disable KTI Link L0p - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2: Auto +**/ + UINT8 KtiLinkL0pEn; + +/** Offset 0x0084 - KTI Link L1 + Enable or Disable KTI Link L1 - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2: Auto +**/ + UINT8 KtiLinkL1En; + +/** Offset 0x0085 - Kti Link Speed Per Port + Setup KTI Link Speed to be allocated for each port - 0: 128GT, 1: 144GT, 2: 160GT, + 3: 200GT, <b>0x7f: Max KTI Link Speed(Default)</b>. + 0:128GT, 1:144GT, 2:160GT, 3:200GT, 0x7f:Max KTI Link Speed +**/ + UINT8 KtiLinkSpeedPerPort[48]; + +/** Offset 0x00B5 - DfxL0p Enable + Indicates the DfxL0p Enable to be allocated for each port - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 DfxL0pEnable[48]; + +/** Offset 0x00E5 - DfxL1 Enable + Indicates the DfxL1 Enable to be allocated for each port - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 DfxL1Enable[48]; + +/** Offset 0x0115 - KTI Failover + Enable or Disable KTI Failover - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2: Auto +**/ + UINT8 KtiFailoverEn; + +/** Offset 0x0116 - KTI LB Enable + Enable or Disable KTI LB - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 KtiLbEn; + +/** Offset 0x0117 - KTI CRC Mode + Select KTI CRC Mode - <b>0: 16bit(Default)</b>, 1: 32bit, 2: Auto. + 0:16bit, 1:32bit, 2:Auto +**/ + UINT8 KtiCrcMode; + +/** Offset 0x0118 - KTI CPU Socket Hotplug + Enable or Disable KTI CPU Socket Hotplug - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 KtiCpuSktHotPlugEn; + +/** Offset 0x0119 - KTI CPU Socket HotPlug Topology + Select KTI CPU Socket HotPlug Topology - <b>0: 4Socket(Default)</b>, 1: 8Socket. + 0:4Socket, 1:8Socket +**/ + UINT8 KtiCpuSktHotPlugTopology; + +/** Offset 0x011A - KTI SKU Mismatch Check + Enable or Disable KTI SKU Mismatch Check - 0: Disable, <b>1 :Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 KtiSkuMismatchCheck; + +/** Offset 0x011B - TOR Threshold - Loctorem threshold Normal + Select TOR Threshold - Loctorem threshold Normal - 0: Disable, <b>1: Auto(Default)</b>, + 2: Low, 3: Medium, 4: High. + 0:Disable, 1:Auto, 2:Low, 3:Medium, 4:High +**/ + UINT8 TorThresLoctoremNorm; + +/** Offset 0x011C - TOR threshold - Loctorem threshold empty + Select TOR threshold - Loctorem threshold empty - 0: Disable, <b>1: Auto(Default)</b>, + 2: Low, 3: Medium, 4:High. + 0:Disable, 1:Auto, 2:Low, 3:Medium, 4:High +**/ + UINT8 TorThresLoctoremEmpty; + +/** Offset 0x011D - TSC Sync in Sockets + Enable or Disable TSC Sync in Sockets - 0: Disable, <b>1: Enable(Default)</b>, 2: Auto. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 TscSyncEn; + +/** Offset 0x011E - HA A to S directory optimization + Enable or Disable HA A to S directory optimization - 0: Disable, 1: Enable, <b>2: + Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 StaleAtoSOptEn; + +/** Offset 0x011F - LLC Deadline Allocation + Enable or Disable LLC Deadline Allocation - 0: Disable, <b>1: Enable(Default)</b>, 2: Auto. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 LLCDeadLineAlloc; + +/** Offset 0x0120 - MBA BW Calibration Profiles + Choice of MBA BW throttling curve - 0: Linear BW shaping, 1: Biased BW shaping, + 2: Legacy BW shaping, <b>3: Auto(Default)</b>. + 0:Linear BW shaping, 1:Biased BW shaping, 2:Legacy BW shaping, 3:Auto +**/ + UINT8 MbeBWCalChoice; + +/** Offset 0x0121 - Split Lock + Enable or Disable Split Lock - <b>0: Disable(Default)</b>, 1: Enable, 2: Auto. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 SplitLock; + +/** Offset 0x0122 - Affinitize M2Iosf to Upi for 2-Socket + Affinitize M2IOSF traffic to proper UPI links to improve 2-Socket P2P perf - 0: + Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 M2iosfToUpiAffinity; + +/** Offset 0x0123 - MMCFG Base Address + Setup MMCFG Base Address - 0: 1G, 1: 1.5G, 2: 1.75G, 3: 2G, 4: 2.25G, 5: 3G, <b>6: + Auto(Default)</b>. + 0:1G, 1:1.5G, 2:1.75G, 3:2G, 4:2.25G, 5:3G, 6:Auto +**/ + UINT8 mmCfgBase; + +/** Offset 0x0124 - MMCFG Size + Select MMCFG Size - 0: 64M, 1: 128M, 2: 256M, 3: 512M, 4: 1G, 5: 2G, <b>6: Auto(Default)</b>. + 0:64M, 1:128M, 2:256M, 3:512M, 4:1G, 5:2G, 6:Auto +**/ + UINT8 mmCfgSize; + +/** Offset 0x0125 +**/ + UINT8 UnusedUpdSpace0[3]; + +/** Offset 0x0128 - MMIO High Base Address + MMIO High Base Address, a hex number for Bit[51:32] +**/ + UINT32 mmiohBase; + +/** Offset 0x012C - CPU Physical Address Limit + CPU Physical Address Limit - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 CpuPaLimit; + +/** Offset 0x012D +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x012E - MMIO High Size + MMIO High Size, Number of 1GB contiguous regions to be assigned for MMIOH space + per CPU. Range 1-1024 +**/ + UINT16 mmiohSize; + +/** Offset 0x0130 - isocEn + Enable or Disable isocEn - <b>0: Disable(Default)</b>, 1: Enable, 2: Auto. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 isocEn; + +/** Offset 0x0131 - DCA + Enable or Disable DCA - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 dcaEn; + +/** Offset 0x0132 +**/ + UINT8 UnusedUpdSpace2[2]; + +/** Offset 0x0134 - BoardTypeBitmask + BoardTypeBitmask +**/ + UINT32 BoardTypeBitmask; + +/** Offset 0x0138 - AllLanesPtr + Pointer to array of ALL_LANES_EPARAM_LINK_INFO +**/ + UINT32 AllLanesPtr; + +/** Offset 0x013C - PerLanePtr + Pointer to array of PER_LANE_EPARAM_LINK_INFO +**/ + UINT32 PerLanePtr; + +/** Offset 0x0140 - AllLanesSizeOfTable + Number of elements in AllLanesPtr array. +**/ + UINT32 AllLanesSizeOfTable; + +/** Offset 0x0144 - PerLaneSizeOfTable + Number of elements in PerLanePtr array. +**/ + UINT32 PerLaneSizeOfTable; + +/** Offset 0x0148 - WaitTimeForPSBP + Enable or Disable WaitTimeForPSBP +**/ + UINT32 WaitTimeForPSBP; + +/** Offset 0x014C - WaSerializationEn + Enable or Disable WaSerializationEn - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 WaSerializationEn; + +/** Offset 0x014D - KtiInEnableMktme + Enable or Disable KtiInEnableMktme - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 KtiInEnableMktme; + +/** Offset 0x014E - HIOP STACK DISABLE + Enables/Disables given HIOP STACK. Default is AUTO no stack is disabled. 1 - The + stacks indicated by the bit locations are disabled. 0 - The stacks indicated by + the bit locations are not modified. The stack order is abstracted each bit 0 = + stack 0 ... bit n = stack n. The bit setting for each stack can be overriden by + BIOS based on part-knob compatibility. The array size must be MAX_SOCKET x UINT32. +**/ + UINT8 StackDisableBitMap[32]; + +/** Offset 0x016E - CFRS3mProvision + Enable or Disable Provision S3M CFR - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 CFRS3mProvision; + +/** Offset 0x016F - CFRS3mManualCommit + Enable or Disable Manual Commit S3M FW CFR - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 CFRS3mManualCommit; + +/** Offset 0x0170 - CFRPucodeProvision + Enable or Disable Provision PUcode CFR - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 CFRPucodeProvision; + +/** Offset 0x0171 - CFRPucodeManualCommit + Enable or Disable Manual Commit PUcode CFR - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 CFRPucodeManualCommit; + +/** Offset 0x0172 +**/ + UINT8 UnusedUpdSpace3[2]; + +/** Offset 0x0174 - CFRImagePtr + Pointer to array of CFR Image +**/ + UINT32 CFRImagePtr; + +/** Offset 0x0178 - Processor VmxEnable Function + Enable(Default) or Disable Processor VmxEnable Function - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 VmxEnable; + +/** Offset 0x0179 - Processor X2apic Function + Enable(Default) or Disable Processor X2apic Function - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 X2apic; + +/** Offset 0x017A - Processor HyperThreading Function + Enable(Default) or Disable Processor HyperThreading Function - 1: Disable, <b>0: + Enable(Default)</b>. + 1:Disable, 0:Enable +**/ + UINT8 ProcessorHyperThreadingDisable; + +/** Offset 0x017B - Processor Dynamic Intel Speed Select (ISS) Function + Enable or Disable(Default) Processor Dynamic Intel Speed Select (ISS) Function - + <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 ProcessorDynamicIssEnable; + +/** Offset 0x017C - Enables Intel(R) TXT + Enable or Disable(Default) Enables Intel(R) TXT - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 ProcessorLtsxEnable; + +/** Offset 0x017D - DDR frequency limit + Select DDR frequency limit, <b>0x00: Auto(Default)</b>, 0x13:DDR_3200, 0x16:DDR_3600, + 0x19:DDR_4000, 0x1C:DDR_4400, 0x1D:DDR_4800, 0x1E:DDR_5200, 0x1F:DDR_5600 +**/ + UINT8 DdrFreqLimit; + +/** Offset 0x017E - Memory Serial Debug Message Level + Select Memory Serial Debug Message Level - 0: Disable, 1: Minimum, 2: Normal, <b>3: + Maximum(Default)</b>, 4: Auto. + 0:Disable, 1:Minimum, 2:Normal, 3:Maximum, 4:Auto +**/ + UINT8 serialDebugMsgLvl; + +/** Offset 0x017F - IIO ConfigIOU0 + ConfigIOU[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU0[8]; + +/** Offset 0x0187 - IIO ConfigIOU1 + ConfigIOU[MAX_SOCKET][1]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU1[8]; + +/** Offset 0x018F - IIO ConfigIOU2 + ConfigIOU[MAX_SOCKET][2]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU2[8]; + +/** Offset 0x0197 - IIO ConfigIOU3 + ConfigIOU[MAX_SOCKET][3]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU3[8]; + +/** Offset 0x019F - IIO ConfigIOU4 + ConfigIOU[MAX_SOCKET][4]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU4[8]; + +/** Offset 0x01A7 - IIO ConfigIOU5 + ConfigIOU[MAX_SOCKET][5]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU5[8]; + +/** Offset 0x01AF - IIO ConfigIOU6 + ConfigIOU[MAX_SOCKET][6]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU6[8]; + +/** Offset 0x01B7 +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x01B8 - IIO PCIE Config Table Ptr + Pointer to array of UPD_IIO_PCIE_PORT_CONFIG +**/ + UINT32 IioPcieConfigTablePtr; + +/** Offset 0x01BC - IIO PCIE Config Table Number + Number of elements in IioPcieConfigTablePtr array, socket number as unit. +**/ + UINT32 IioPcieConfigTableNumber; + +/** Offset 0x01C0 - IIO DeEmphasis Array Ptr + Pointer to array of DeEmphasis +**/ + UINT32 DeEmphasisPtr; + +/** Offset 0x01C4 - IIO DeEmphasis Array Number + Number of elements in DeEmphasis array. +**/ + UINT32 DeEmphasisNumber; + +/** Offset 0x01C8 - IIO PCIe Common Clock Array Ptr + Pointer to array of PCIe Common Clock +**/ + UINT32 PcieCommonClockPtr; + +/** Offset 0x01CC - IIO PCIe Common Clock Array Number + Number of elements in PCIe Common Clock array. +**/ + UINT32 PcieCommonClockNumber; + +/** Offset 0x01D0 - VT-d Support + Enable or Disable VT-d Support - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 VtdSupport; + +/** Offset 0x01D1 - PCIe ACSCTL + Enable/Disable overwrite of PCI Access Control Services Control register in PCI + root ports - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 VtdPciAcsCtlWaEn; + +/** Offset 0x01D2 +**/ + UINT8 UnusedUpdSpace5[2]; + +/** Offset 0x01D4 - IIO PCIe Port Hide Array Ptr + Pointer to array of Hide or visible for IIO Pcie Port. +**/ + UINT32 PEXPHIDEPtr; + +/** Offset 0x01D8 - IIO PCIe Port Hide Array Number + Number of elements in IIO PCIe Port Hide Array. +**/ + UINT32 PEXPHIDENumber; + +/** Offset 0x01DC - PcieHotPlugEnable + Enable or disable Pcie hot plug enable feature - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 PcieHotPlugEnable; + +/** Offset 0x01DD +**/ + UINT8 UnusedUpdSpace6; + +/** Offset 0x01DE - DelayAfterPCIeLinkTraining + Custom delay after PCI-E link training on IIO ports +**/ + UINT16 DelayAfterPCIeLinkTraining; + +/** Offset 0x01E0 - IIO PCI bus resource Ptr + Pointer to array of socket PCI bus resource. +**/ + UINT32 PciBusResConfigPtr; + +/** Offset 0x01E4 - IIO PCI IO/MMIO base and limits resource Ptr + Pointer to array of socket PCI IO/MMIO resource. +**/ + UINT32 PciBaseLimitsResConfigPtr; + +/** Offset 0x01E8 - PCH PCIE PLL Ssc + Pointer to array of socket PCI IO/MMIO resource. +**/ + UINT8 PchPciePllSsc; + +/** Offset 0x01E9 - MeUmaEnable + Enable or disable ME UMA feature - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 MeUmaEnable; + +/** Offset 0x01EA - SerialIoUartDebugEnable + Enable or Disable SerialIo Uart debug library in FSP - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 SerialIoUartDebugEnable; + +/** Offset 0x01EB +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x01EC - ISA Serial Base selection + Select ISA Serial Base address could be initialized by boot loader - 0x2F8: 0x2F8, + <b>0x3F8: 0x3F8(Default)</b>. + 0x2F8:0x2F8, 0x3F8:0x3F8 +**/ + UINT16 SerialIoUartDebugIoBase; + +/** Offset 0x01EE - MemRefreshWaterMark + Enable or Disable MemRefreshWaterMark in FSP - <b>0: Auto(Default)</b>, 1: Enable, + 2: Disable. + 0:Auto, 1:Enable, 2:Disable +**/ + UINT8 PanicWm; + +/** Offset 0x01EF - promoteMrcWarnings + Enable or Disable MRC promote warning in FSP - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 promoteMrcWarnings; + +/** Offset 0x01F0 - promoteWarnings + <b>Enable(Default)</b> or Disable Promote warning in FSP - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 promoteWarnings; + +/** Offset 0x01F1 - serialDebugMsgLvlTrainResults + Enable or Disable Promote warning in FSP - <b>0:Disable(Default)</b>, 8:Enable. + 0:Disable, 8:Enable +**/ + UINT8 serialDebugMsgLvlTrainResults; + +/** Offset 0x01F2 - MemTest + <b>Enable(Default)</b> or Disable memory test during normal boot in FSP - 0: Disable, + <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 HwMemTest; + +/** Offset 0x01F3 +**/ + UINT8 UnusedUpdSpace8; + +/** Offset 0x01F4 - MemTest Loops + Number of memory test loops during normal boot, set to 0 to run memtest infinitely + in FSP - <b> 1 (Default)</b>. + minimum = 0, maximum = 65535 +**/ + UINT16 MemTestLoops; + +/** Offset 0x01F6 +**/ + UINT8 UnusedUpdSpace9[2]; + +/** Offset 0x01F8 - Adv MemTest Options + This option is a bit mask[19:0]: All 0 = disabled: bit-0=XMATS8, bit-1=XMATS16, + bit-2=Reserved, bit-3=Reserved, bit-4=WCMATS8, bit-5=WCMCH8, bit-6=Reserved, bit-7=MARCHCM64, + bit-8=Reserved, bit-9=Reserved, bit-10=Reserved, bit-11=TWR, bit-12=DATARET, bit-13=MATS8TC1, + bit-14=MATS8TC2, bit-15=MATS8TC3, bit-16=SK-HYNIX, bit-17=SAMSUNG, bit-18=MICRON-RMW, + bit-19=SCRAM_X2 in FSP. +**/ + UINT32 AdvMemTestOptions; + +/** Offset 0x01FC - SmartTestKey + Number of SmartTest Key +**/ + UINT32 SmartTestKey; + +/** Offset 0x0200 - Adv MemTest Pause + Specify a pause delay between 0 to 256000 in units of usec. This is a time period + where refresh is disabled between write and read sequences in FSP. +**/ + UINT32 AdvMemTestCondPause; + +/** Offset 0x0204 - Adv MemTest tREFI + Specify tREFI (refresh rate) timing between 1850 to 7800 in nsec. +**/ + UINT16 AdvMemTestCondTrefi; + +/** Offset 0x0206 - Adv MemTest tWR + Specify tWR timing between 48 to 96 in units of tCK in FSP. +**/ + UINT8 AdvMemTestCondTwr; + +/** Offset 0x0207 +**/ + UINT8 UnusedUpdSpace10; + +/** Offset 0x0208 - Adv MemTest PMIC VDD Level + Specify PMIC VDD level in units of mV in FSP. +**/ + UINT16 AdvMemTestCondPmicVdd; + +/** Offset 0x020A - Adv MemTest Conditions + Auto = set test conditions based on test type; Manual = specify global test conditions; + Disable = Do not apply test conditions in FSP - 0: Disable, <b>1: Auto(Default)</b>, + 2: Manual. + 0:Disable, 1:Auto, 2:Manual +**/ + UINT8 AdvMemTestCondition; + +/** Offset 0x020B - Adv MemTest Reset Failure Tracking List + Enable/disable Reset of the Row Failure Tracking List after each Adv MemTest option. + Useful for testing performance of multiple options in FSP - <b>0: Disable(Default)</b>, + 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 AdvMemTestResetList; + +/** Offset 0x020C - MemTest On Cold Fast Boot + Enable - Enables memory test during cold fast boot. Disable - Disables this feature. + Auto - Sets it to the MRC default setting; current default is Disable in FSP - + <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnColdFastBoot; + +/** Offset 0x020D - Attempt Fast Boot + Enable - Portions of memory reference code will be skipped when possible to increase + boot speed on warm boots. Disable - Disables this feature. Auto - Sets it to the + MRC default setting - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 AttemptFastBoot; + +/** Offset 0x020E - MemTest On Cold Fast Boot + Enable - Enables memory test during cold fast boot. Disable - Disables this feature. + Auto - Sets it to the MRC default setting - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 AttemptFastBootCold; + +/** Offset 0x020F - Multithreaded Memory Training + Selects the number of processor sockets to train in parallel. - <b>0: All sockets + operate in parallel(Default)</b>. 1: At any time only one socket is executing. + 2: At any time only two socket are executing. 4: At any time only four socket are + executing in FSP. + 0:All Processor Sockets, 1:One Socket at a Time (No Multithreading), 2:Two Sockets + at a Time, 4:Four Sockets at a Time +**/ + UINT8 AllowedSocketsInParallel; + +/** Offset 0x0210 - Auto-Reset on mem Training Error + Enable/Disable Auto-Reset on mem Training Error in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 AutoResetOnMemErr; + +/** Offset 0x0211 - Rank Margin Tool + Enable/Disable the Rank Margin Tool in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 EnableRMT; + +/** Offset 0x0212 - RMT on Fast Cold Boot + Enable/Disable the Rank Margin Tool on a Fast Cold Boot in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 EnableRMTonFCB; + +/** Offset 0x0213 - Execute Jedecinit before RMT + Execute Jedecinit before Rank Margin Tool in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 JedecInitBeforeRMT; + +/** Offset 0x0214 - Backside Margining + Enable/Disable margin test on the register or buffer backside in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 RMTBacksideMargining; + +/** Offset 0x0215 - CmdAll + Step size of CmdAll. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto(Default)</b>, + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTCmdAll; + +/** Offset 0x0216 - RMT Debug Messages + Enable/Disable the RMT debug messages in FSP - <b>2:Disable(Default)</b>, 5:Enable. + 2:Disable, 5:Enable +**/ + UINT8 RMTDebugMessages; + +/** Offset 0x0217 - RMT Display Tables + Enable/Disable displaying results as tables in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTDisplayTables; + +/** Offset 0x0218 - RMT Loop Count + Exponential loop count for single rank test in FSP. +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0219 +**/ + UINT8 UnusedUpdSpace11[3]; + +/** Offset 0x021C - Test Signal Bit Mask For RMT + Test signal bit mask for RMT in FSP. +**/ + UINT32 TestSignalBitMaskRMT; + +/** Offset 0x0220 - RMT Per Bit Margining + Enable/Disable Per Bit Margining in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTPerBitMargining; + +/** Offset 0x0221 - RMT Per CA Lane Margining + Enable/Disable Per CA Lane Margining in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTPerCaLaneMargining; + +/** Offset 0x0222 - RMT Display Plots + Enable/Disable the display of per-bit results as plots in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTPerDisplayPlots; + +/** Offset 0x0223 - RMT RxDqs + Step size of RxDqs. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto,(Default)</b> + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTRxDqs; + +/** Offset 0x0224 - RMT RxVref + Step size of RxVref. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto,(Default)</b> + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTRxVref; + +/** Offset 0x0225 - RMT Scrambler + Enable or Disable scrambler during RMT test in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTScrambler; + +/** Offset 0x0226 - RMT Step Size Override + Enable or Disable overriding the default step sizes in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 RMTStepSizeOverride; + +/** Offset 0x0227 - RMT TxDq + Step size of TxDq. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto(Default)</b>, + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTTxDq; + +/** Offset 0x0228 - RMT TxVref + Step size of TxVref. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto(Default)</b>, + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTTxVref; + +/** Offset 0x0229 - DDR5 ECS + Enable/Disable DDR5 Error Check and Scrub (ECS) in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 ErrorCheckScrub; + +/** Offset 0x022A - Enforce Memory POR + 0:Enforce POR - Enforces Plan Of Record restrictions for DDR5 frequency and voltage + programming. <b>2:Disable - Disables this feature and user is able to run at higher + frequencies, specified in the DDR Frequency Limit field (limited by processor support)(Default)</b>. + 0:Enforce POR, 2:Disabled +**/ + UINT8 EnforceDdrMemoryFreqPor; + +/** Offset 0x022B - Enforce Population POR + Enable Memory Population POR Enforcement. Selecting Enforce Validated Populations + will only allow populations that have been validated in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 EnforcePopulationPor; + +/** Offset 0x022C - DDR PPR Type + Selects DDR Post Package Repair Type - 2: Hard PPR, <b>1: Soft PPR (Default)</b>, + 0: Disabled. + 0:Disabled, 2:Hard PPR, 1:Soft PPR +**/ + UINT8 pprType; + +/** Offset 0x022D - Force PPR On All Dram for UCE + Force PPR on all dram for UCE in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disabled, 1:Enabled +**/ + UINT8 ForcePprOnAllDramUce; + +/** Offset 0x022E +**/ + UINT8 UnusedUpdSpace12[2]; + +/** Offset 0x0230 - pprAddrVariablePtr + Pointer to array of PPR_ADDR_VARIABLE +**/ + UINT32 PprAddrVariablePtr; + +/** Offset 0x0234 - Allow Memory Test Correctable Error + Enable - Logs error and allows correctable errors during memory test(DIMM Rank not + removed). Disable - Logs error and removes DIMM Rank. Auto - Sets it to the MRC + default setting; current default is Enable in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 allowCorrectableMemTestError; + +/** Offset 0x0235 - Memory I/O Health Check + Memory I/O Health Check - 0: Auto, 1: Manual, <b>2: Disable (Default)</b>. Select + option Auto for default values. Manual for new values. Disable for disabling feature + in FSP - 0:Auto, 1:Manual, <b>2:Disable(Default)</b>. + 0:Auto, 1:Manual, 2:Disable +**/ + UINT8 MemIOHealthCheck; + +/** Offset 0x0236 - RxDqsDelay Left Edge + Offset for RxDqsDelay Left Edge in FSP. +**/ + UINT8 CriticalRxDqsDelayLeftEdge; + +/** Offset 0x0237 - RxDqsDelay Right Edge + Offset for RxDqsDelay Right in FSP. +**/ + UINT8 CriticalRxDqsDelayRightEdge; + +/** Offset 0x0238 - RxVref Left Edge + Offset for RxVref Left Edge in FSP. +**/ + UINT8 CriticalRxVrefLeftEdge; + +/** Offset 0x0239 - RxVref Right Edge + Offset for RxVref Right Edge in FSP. +**/ + UINT8 CriticalRxVrefRightEdge; + +/** Offset 0x023A - TxDqDelay Left Edge + Offset for TxDqDelay Left Edge in FSP. +**/ + UINT8 CriticalTxDqDelayLeftEdge; + +/** Offset 0x023B - TxDqDelay Right Edge + Offset for TxDqDelay Right Edge in FSP. +**/ + UINT8 CriticalTxDqDelayRightEdge; + +/** Offset 0x023C - TxVref Left Edge + Offset for TxDqDelay Left Edge in FSP. +**/ + UINT8 CriticalTxVrefLeftEdge; + +/** Offset 0x023D - TxVref Right Edge + Offset for TxDqDelay Right Edge in FSP. +**/ + UINT8 CriticalTxVrefRightEdge; + +/** Offset 0x023E - Reboot On Critical Failure + Reboot System on Critical failure to do Memory Training in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 ResetOnCriticalError; + +/** Offset 0x023F - Number of Times to Reboot and Retrain + Number of times to Reboot System on Critical failure to do Memory Training in FSP. +**/ + UINT8 CriticalRetries; + +/** Offset 0x0240 - Memory I/O Health Check Loop Count + CPGC Test Loop Count for Memory IO Health Test +**/ + UINT8 MemIOHealthLoopCount; + +/** Offset 0x0241 - Telemetry RxDqsDelay Left Edge + Offset for Telemetry RxDqsDelay Left Edge in FSP. +**/ + UINT8 TelemetryRxDqsDelayLeftEdge; + +/** Offset 0x0242 - Telemetry RxDqsDelay Right Edge + Offset for Telemetry RxDqsDelay Right Edge in FSP. +**/ + UINT8 TelemetryRxDqsDelayRightEdge; + +/** Offset 0x0243 - Telemetry RxVref Left Edge + Offset for Telemetry RxDqsDelay Left Edge in FSP. +**/ + UINT8 TelemetryRxVrefLeftEdge; + +/** Offset 0x0244 - Telemetry RxVref Right Edge + Offset for Telemetry RxDqsDelay Right Edge in FSP. +**/ + UINT8 TelemetryRxVrefRightEdge; + +/** Offset 0x0245 - Telemetry TxDqDelay Left Edge + Offset for Telemetry TxDqDelay Left Edge in FSP. +**/ + UINT8 TelemetryTxDqDelayLeftEdge; + +/** Offset 0x0246 - Telemetry TxDqDelay Right Edge + Offset for Telemetry TxDqDelay Right Edge in FSP. +**/ + UINT8 TelemetryTxDqDelayRightEdge; + +/** Offset 0x0247 - Volatile Memory Mode + Selects 1LM or 2LM mode for volatile memory. For 2LM memory mode, system will try + to configure 2LM but if system is unable to configure 2LM, volatile memory mode + will fall back to 1LM in FSP - <b>0: 1LM(Default)</b>, 1: 2LM, 2: MIX 1LM2LM. + 0: 1LM, 1: 2LM, 2: MIX 1LM2LM +**/ + UINT8 volMemMode; + +/** Offset 0x0248 - Dynamic ECC Mode Selection + Enable/Disable Dynamic ECC Mode Selection in FSP - 0:Disable, <b>1:Enable(Default)</b>, + 2:Enable + Allow 128b ECC. + 0:Disable, 1:Enable, 2:Enable + Allow 128b ECC +**/ + UINT8 DynamicEccModeSel; + +/** Offset 0x0249 - Memory Patrol Scrub + Memory Patrol Scrub - 0:Disable, 1:Enable during FspMemoryInit(), <b>2:Enable during + NotifyPhase(EnumInitPhaseReadyToBoot) (Default)</b>. + 0:Disable, 1:Enable during FspMemoryInit(), 2:Enable during EnumInitPhaseReadyToBoot +**/ + UINT8 PatrolScrub; + +/** Offset 0x024A - Memory Patrol Scrub + Memory Patrol Scrub - <b>0:Disable (Default)</b>, 1:Enable at ReadyToBootFsp(). + 0:Disable, 1:Enable Enable at ReadyToBootFsp() +**/ + UINT8 PatrolScrubNotify; + +/** Offset 0x024B - Patrol Scrub Interval + Patrol Scrub Interval in FSP. +**/ + UINT8 PatrolScrubDuration; + +/** Offset 0x024C - Patrol Scrub Address Mode + Selects the address mode between <b>1: System Physical Address (Default)</b>, 0:Reverse + Address in FSP. + 0:Reverse Address, 1:System Physical Address +**/ + UINT8 PatrolScrubAddrMode; + +/** Offset 0x024D - Memory Thermal Throttling Mode + Memory Configure Memory Thermal Throttling Mode in FSP - 0:Disable, <b>2:CLTT_ENABLE(Default)</b>, + 3:CLTT_PECI_ENABLE. + 0:Disable, 2:CLTT_ENABLE, 3:CLTT_PECI_ENABLE +**/ + UINT8 thermalthrottlingsupport; + +/** Offset 0x024E - Memory Correctable Error Threshold + Memory Correctable Error Threshold (1 - 32767) used for sparing and leaky bucket in FSP. +**/ + UINT16 spareErrTh; + +/** Offset 0x0250 - WR CRC feature Control + Enable/Disable Write CRC in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 WrCRC; + +/** Offset 0x0251 - Adaptive Refresh Management Level + Selects Adaptive Refresh Management(ARFM) Level when refresh management(RFM) is + required. <b>0:Default - RAAIMT, RAAMMT, RAADEC(Default)</b>; 1:Level A - RAAIMT-A, + RAAMMT-A, RAADEC-A; 2:Level B - RAAIMT-B, RAAMMT-B, RAADEC-B; 3:Level C - RAAIMT-C, + RAAMMT-C, RAADEC-C + 0:Default - RAAIMT; RAAMMT; RAADEC, 1:Level A - RAAIMT-A; RAAMMT-A; RAADEC-A, 2:Level + B - RAAIMT-B; RAAMMT-B; RAADEC-B, 3:Level C - RAAIMT-C; RAAMMT-C; RAADEC-C +**/ + UINT8 AdaptiveRefreshMgmtLevel; + +/** Offset 0x0252 - MEMHOT INPUT Control + Enable/Disable MEMHOT INPUT in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 MemHotIn; + +/** Offset 0x0253 - MEMHOT OUTPUT Mode + MEMHOT OUTPUT Mode in FSP - 0:Disable, <b>1:Enable only temphi(Default)</b>, 2:Enable + temphi & mid, 3:Enable temphi & mid & low. + 0:Disable, 1:Enable only temphi, 2:Enable temphi & mid, 3:Enable temphi & mid & low +**/ + UINT8 MemhotOutputOnlyOpt; + +/** Offset 0x0254 - CxlType3LegacyEn + Enable or disable CXL type 3 device using CXL type 2 flow - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 DfxCxlType3LegacyEn; + +/** Offset 0x0255 - DfxPmicSecureMode + 0:Disable Pmic Secure Mode, 1:Enable Pmic Secure Mode, <b>2:Auto Pmic Secure Mode(Default)</b>. + 0:Disable Pmic Secure Mode, 1:Enable Pmic Secure Mode, 2:Auto Pmic Secure Mode +**/ + UINT8 DfxPmicSecureMode; + +/** Offset 0x0256 - IIO PcieSubSystemMode0 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode0[8]; + +/** Offset 0x025E - IIO PcieSubSystemMode1 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode1[8]; + +/** Offset 0x0266 - IIO PcieSubSystemMode2 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode2[8]; + +/** Offset 0x026E - IIO PcieSubSystemMode3 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode3[8]; + +/** Offset 0x0276 - IIO PcieSubSystemMode4 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode4[8]; + +/** Offset 0x027E - IIO PcieSubSystemMode5 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode5[8]; + +/** Offset 0x0286 - IIO PcieSubSystemMode6 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode6[8]; + +/** Offset 0x028E - CXL Header Bypass + Enable/Disable the CXL header bypass in FSP - <b>0:Disabled(Default)</b>, 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 DfxCxlHeaderBypass; + +/** Offset 0x028F - CXL Security Level + CXL Security Level<br>\n + 0: Fully Trusted - CXL Device can get access on CXL.$ for host-attached and device + attached memory ranges in the WB address space.<br>\n + 1: Partially Trusted - CXL Device can get access on CXL.$ for device attached memory + ranges only;<br>\n + 2: Untrusted - All requests on CXL.$ will be aborted by the Host.<br>\n + <b>3: Auto - Currently identical to Fully Trusted. (Default)</b> + 0:Fully Trusted, 1:Partially Trusted, 2:Untrusted, 3:Auto +**/ + UINT8 DfxCxlSecLvl; + +/** Offset 0x0290 +**/ + UINT32 DfxCxlDebugModePtr; + +/** Offset 0x0294 +**/ + UINT32 DfxCxlDebugModeNumber; + +/** Offset 0x0298 - Lock Chipset + Lock or Unlock chipset in FSP - <b>0:Disabled(Default)</b>, 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 LockChipset; + +/** Offset 0x0299 - MSR Lock Control + Enable - MSR 3Ah and CSR 80h will be locked in FSP. Power Good reset is needed to + remove lock bits - <b>0:Disabled(Default)</b>, 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 ProcessorMsrLockControl; + +/** Offset 0x029A - DFX Enable + When Enabled, Expose IIO DFX devices and other CPU devices like PMON in FSP - <b>0:Disabled(Default)</b>, + 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 DFXEnable; + +/** Offset 0x029B - DFX Disable Bios Done + When Enabled, suppresses notifying processor via MSR 151h that boot initialization + is finished in FSP - <b>0:Disabled(Default)</b>, 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 DfxDisableBiosDone; + +/** Offset 0x029C - Processor Package C State + Package C State - 0: C0/C1 state, 1: C2 state, 2: C6(non Retention) state, 3: C6(Retention) + state, 7: No Limit, <b>0xFF: Auto (Default)</b> + 0: C0/C1 state, 1: C2 state, 2: C6(non Retention) state, 3: C6(Retention) state, + 7: No Limit, 0xFF: Auto +**/ + UINT8 CpuPmPackageCState; + +/** Offset 0x029D - Enhanced Intel SpeedStep(R) Tech + Enhanced Intel SpeedStep(R) Tech - <b>1: Enable(Default)</b>, 0: Disable. + 0:Disabled, 1:Enabled +**/ + UINT8 CpuPmEistEnable; + +/** Offset 0x029E - C1E + C1E - <b>1: Enable(Default)</b>, 0: Disable. +**/ + UINT8 CpuPmC1eEnable; + +/** Offset 0x029F - Intel SST-PP + Intel SST-PP Select allows user to choose level - <b>0xFF: Choose lowest level hardware + supported(Default)</b>, 0: Level 0, 3: Level 3, 4: Level 4. +**/ + UINT8 CpuPmIssTdpLevel; + +/** Offset 0x02A0 - Activate SST-BF + SST-BF - <b>0: Disable (Default)</b>, 1: Enabled. + 0:Disabled, 1:Enabled +**/ + UINT8 CpuPmProcessorActivePbf; + +/** Offset 0x02A1 +**/ + UINT8 UnusedUpdSpace13[7]; + +/** Offset 0x02A8 - Socket 0 Core Disable Bitmask + Set bit(s) to Disable or clear bit(s) to Enable core(s) on Socket 0. NOTE: Any core + disabled by user will force static SST-PP. +**/ + UINT64 CpuPmCoreDisableBitmask0; + +/** Offset 0x02B0 - Socket 1 Core Disable Bitmask + Set bit(s) to Disable or clear bit(s) to Enable core(s) on Socket 1. NOTE: Any core + disabled by user will force static SST-PP. +**/ + UINT64 CpuPmCoreDisableBitmask1; + +/** Offset 0x02B8 +**/ + UINT8 ReservedMemoryInitUpd[16]; + +/** IIO Board settings Hob Ptr + Pointer to array of IIO_BOARD_SETTINGS_HOB +**/ + UINT32 IioBoardSettingsHobPtr; + +/** IIO Board Settings Hob length + The IIO Board Settings Hob Length. +**/ + UINT32 IioBoardSettingsHobLength; + +/** BIOS Region Base + Pointer to the location of the BIOS Region +**/ + UINT32 BiosRegionBase; + +/** BIOS Region Size + The size of the BIOS Region in bytes +**/ + UINT32 BiosRegionSize; + +} FSPM_CONFIG; + +typedef struct { + +/** N/A +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** N/A +**/ + FSPM_ARCH2_UPD FspmArchUpd; + +/** N/A +**/ + FSPM_CONFIG FspmConfig; + +/** N/A +**/ + UINT16 UpdTerminator; + +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspsUpd.h new file mode 100644 index 0000000000..864a5a983f --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FspsUpd.h @@ -0,0 +1,292 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - Processor VmxEnable Function + Processor VmxEnable Function - <b>1: Enable(Default)</b>, 0: Disable Processor VmxEnable Function. + 0: Disable, 1: Enable +**/ + UINT8 VmxEnable; + +/** Offset 0x0021 - Processor TurboMode Function + Processor TurboMode Function - <b>1: Enable(Default)</b>, 0: Disable Processor TurboMode Function. + 0: Disable, 1: Enable +**/ + UINT8 TurboMode; + +/** Offset 0x0022 - Processor Safer Mode Extensions Function + Processor Safer Mode Extensions Function - <b>0: Disable(Default)</b>, 1: Enable + Processor Safer Mode Extensions Function. + 0: Disable, 1: Enable +**/ + UINT8 ProcessorSmxEnable; + +/** Offset 0x0023 - SstCp + SstCp - 1: Enable, <b>0: Disable SstCp(Default)</b>. + 0: Disable, 1: Enable +**/ + UINT8 SstCpSetting; + +/** Offset 0x0024 - SstCp Capable Status + SST-CP Capable Status in system - <b>0: Disable(Default)</b>, 1: Enable. + 0: Disable, 1: Enable +**/ + UINT8 SstCpCapableSystem; + +/** Offset 0x0025 +**/ + UINT8 UnusedUpdSpace0[1]; + +/** Offset 0x0026 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x0030 - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x003A - PchAdrEn + PchAdr - <b>0: PLATFORM POR(Default)</b>, 1: FORCE ENABLE, 2:FORCE DISABLE. + 0: PLATFORM POR, 1: FORCE ENABLE, 2: FORCE DISABLE +**/ + UINT8 PchAdrEn; + +/** FSP smm init enable + Enable / Disable FSP smm init + $EN_DIS +**/ + UINT8 FspSmmInitEn; + +/** Offset 0x003B - EnableTme + EnableTme - <b>0: Disabled(Default)</b>, 1: Enabled, 2:Software Controlled. + 0: Disabled, 1: Enabled, 2:Software Controlled +**/ + UINT8 EnableTme; + +/** Offset 0x003C - EnableTmeBypass + EnableTmeBypass - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 EnableTmeBypass; + +/** Offset 0x003D - SgxFactoryReset + SgxFactoryReset - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxFactoryReset; + +/** Offset 0x003E - EnableSgx + EnableSgx - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 EnableSgx; + +/** Offset 0x003F - SgxPackageInfoInBandAccess + SgxPackageInfoInBandAccess - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxPackageInfoInBandAccess; + +/** Offset 0x0040 - SgxQoS + SgxQoS - 0: Disabled, <b>1: Enabled(Default)</b>. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxQoS; + +/** Offset 0x0041 - EpochUpdate + EpochUpdate - 1: Change to New Random Owner EPOCHs, <b>2: Manual User Defined Owner + EPOCHs(Default)</b>. + 1: Change to New Random Owner EPOCHs, 2: Manual User Defined Owner EPOCHs +**/ + UINT8 EpochUpdate; + +/** Offset 0x0042 - SgxLeWr + SgxLeWr - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxLeWr; + +/** Offset 0x0043 - SgxDebugMode + SgxDebugMode - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxDebugMode; + +/** Offset 0x0044 - SgxAutoRegistrationAgent + SgxAutoRegistrationAgent - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxAutoRegistrationAgent; + +/** Offset 0x0045 - DfxSgxRegistrationServerSelect + DfxSgxRegistrationServerSelect - <b>0: SBX(Default)</b>, 1: PRX, 2:AUTO, 3:LIV, + 4:SW Defined Server. + 0: SBX, 1: PRX, 2:AUTO, 3:LIV, 4:SW Defined Server +**/ + UINT8 DfxSgxRegistrationServerSelect; + +/** Offset 0x0046 - Processor Enable Monitor MWAIT + Processor Enable Monitor MWAIT - <b>1: Enable(Default)</b>, 0: Disable Processor + Monitor MWAIT. + 0: Disabled, 1: Enabled +**/ + UINT8 CpuPmMonitorMWait; + +/** Offset 0x0047 - Processor C6 + Processor C6 - <b>1: Enable(Default)</b>, 0: Disable Processor C6 (ACPI C3) report to OS. + 0: Disabled, 1: Enabled +**/ + UINT8 CpuPmC6Enable; + +/** Offset 0x0048 - Hardware P-States + Hardware P-States - 0: Disable: Hardware chooses a P-state based on OS Request + (Legacy P-States), <b>1:Native Mode:Hardware chooses a P-state based on OS guidance(Default)</b>, + 2:Out of Band Mode:Hardware autonomously chooses a P-state (no OS guidance), 3:Native + Mode with No Legacy Support. + 0: Disable, 1: Native Mode, 2: Out of Band Mode, 3: Native Mode with No Legacy Support +**/ + UINT8 CpuPmProcessorHWPMEnable; + +/** Offset 0x0049 - Power Performance Tuning + Power Performance Tuning - <b>0: OS Controls EPB (Default)</b>, 1: BIOS Controls + EPB, 2: PECI Controls EPB. + 0: OS Controls EPB, 1: BIOS Controls EPB, 2: PECI Controls EPB +**/ + UINT8 CpuPmPwrPerfTuning; + +/** Offset 0x004A - Configure SST-BF + Allow (Default)/Disallow BIOS to configure SST-BF High Priority Cores so that SW + does not have to configure - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 CpuPmProcessorConfigurePbf; + +/** Offset 0x004B - CF9 Global Reset Promotion + CF9 Global Reset Promotion - 1: Enable promoting CF9 reset to global, <b>0: Disable + promoting CF9 reset to global(Default)</b>. + 0: Disabled, 1: Enabled +**/ + UINT8 MeGrPromotionEnabled; + +/** Offset 0x004C - Global Reset Lock + Global Reset Lock - <b>1: Enable locking the joint ME and host reset capability(Default)</b>, + 0: Disable locking the joint ME and host reset capability. + 0: Disabled, 1: Enabled +**/ + UINT8 MeGrLockEnabled; + +/** Offset 0x004D - Delayed Authentication Mode + Enable or disable Delayed Authentication Mode - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 DelayedAuthenticationMode; + +/** Offset 0x004E - Delayed Authentication Mode Override + Enable or disable Delayed Authentication Mode Override - <b>0: Disable(Default)</b>, + 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 DelayedAuthenticationModeOverride; + +/** Offset 0x004F - Core Bios Done Message + Enable or disable Core Bios Done message sent to ME - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 CoreBiosDoneEnabled; + +/** Offset 0x0050 - End Of Post Message + Enable or disable sending END_OF_POST message to ME - 0: Disable, 1: Send in PEI, + <b>2: Send in DXE(Default)</b>. + 0:Disable, 1:Send in PEI, 2:Send in DXE +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x0051 - HMRFPO_LOCK Message + Enable or disable sending HMRFPO_LOCK message to ME - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 MeHmrfpoLockEnabled; + +/** Offset 0x0052 - HMRFPO_ENABLE Message + Enable or disable sending HMRFPO_ENABLE message to ME - <b>0: Disable(Default)</b>, + 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 MeHmrfpoEnableEnabled; + +/** Offset 0x0053 +**/ + UINT8 UnusedUpdSpace1[1]; + +/** Offset 0x0054 +**/ + UINT8 ReservedSiliconInitUpd[16]; +} FSPS_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPS_CONFIG FspsConfig; + +/** Offset 0x0064 +**/ + UINT8 UnusedUpdSpace2[2]; + +/** Offset 0x0066 +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FsptUpd.h new file mode 100644 index 0000000000..77ed502735 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/FsptUpd.h @@ -0,0 +1,103 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPT_UPD_H__ +#define __FSPT_UPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + +typedef struct { + +/** N/A +**/ + UINT64 MicrocodeRegionBase; + +/** N/A +**/ + UINT64 MicrocodeRegionLength; + +/** N/A +**/ + UINT64 CodeRegionBase; + +/** N/A +**/ + UINT64 CodeRegionLength; + +} FSPT_CORE_UPD; + + +typedef struct { + +/** Offset 0x0040 - Disable Port80 output in FSP-T + Select Port80 Control in FSP-T - 0:VPD-Style, <b>1:Enable Port80 Output (Default)</b>, + 2:Disable Port80 Output, refer to FSP Integration Guide for details. + 0:VPD-Style, 1:Enable Port80 Output[Default], 2:Disable Port80 Output +**/ + UINT8 FsptPort80RouteDisable; + +/** N/A +**/ + UINT8 ReservedTempRamInitUpd[31]; + +} FSPT_CONFIG; + + +typedef struct { + +/** N/A +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** N/A +**/ + FSPT_ARCH2_UPD FsptArchUpd; + +/** N/A +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** N/A +**/ + FSPT_CONFIG FsptConfig; + +/** N/A +**/ + UINT16 UpdTerminator; + +} FSPT_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/IioPcieConfigUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/IioPcieConfigUpd.h new file mode 100644 index 0000000000..65c2a42ff9 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/IioPcieConfigUpd.h @@ -0,0 +1,264 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _IIO_PCIE_CONFIG_UPD_H_ +#define _IIO_PCIE_CONFIG_UPD_H_ + +#ifndef MAX_SOCKET +#define MAX_SOCKET 4 +#endif + +#ifndef MAX_LOGIC_IIO_STACK +#define MAX_LOGIC_IIO_STACK 14 +#endif + +#ifndef MAX_IIO_PORTS_PER_SOCKET +#define MAX_IIO_PORTS_PER_SOCKET 57 +#endif + +#ifndef MAX_IOU_PER_SOCKET +#define MAX_IOU_PER_SOCKET 7 +#endif + +#define MAX_VMD_STACKS_PER_SOCKET 8 // Max number of stacks per socket supported by VMD + +#pragma pack(1) + +typedef enum { + PE0 = 0, + PE_MAX, + PE_ = 0xFF // temporary unknown value +} IIO_PACKAGE_PE; + +typedef struct { + UINT8 SLOTEIP[MAX_IIO_PORTS_PER_SOCKET]; // Electromechanical Interlock Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B17) + UINT8 SLOTHPCAP[MAX_IIO_PORTS_PER_SOCKET]; // Slot Hot Plug capable - Slot Capabilities (D0-10 / F0 / R0xA4 / B6) + UINT8 SLOTHPSUP[MAX_IIO_PORTS_PER_SOCKET]; // Hot Plug surprise supported - Slot Capabilities (D0-10 / F0 / R0xA4 / B5) + UINT8 SLOTPIP[MAX_IIO_PORTS_PER_SOCKET]; // Power Indicator Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B4) + UINT8 SLOTAIP[MAX_IIO_PORTS_PER_SOCKET]; // Attention Inductor Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B3) + UINT8 SLOTMRLSP[MAX_IIO_PORTS_PER_SOCKET]; // MRL Sensor Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B2) + UINT8 SLOTPCP[MAX_IIO_PORTS_PER_SOCKET]; // Power Controller Present - Slot Capabilities (D0-10 / F0 / R0xA4 /B1) + UINT8 SLOTABP[MAX_IIO_PORTS_PER_SOCKET]; // Attention Button Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B0) + UINT8 SLOTIMP[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 SLOTSPLS[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 SLOTSPLV[MAX_IIO_PORTS_PER_SOCKET]; + UINT16 SLOTPSP[MAX_IIO_PORTS_PER_SOCKET]; + BOOLEAN VppEnabled[MAX_IIO_PORTS_PER_SOCKET]; // 00 -- Disable, 01 -- Enable //no setup option defined- aj + UINT8 VppPort[MAX_IIO_PORTS_PER_SOCKET]; // 00 -- Port 0, 01 -- Port 1 //no setup option defined- aj + UINT8 VppAddress[MAX_IIO_PORTS_PER_SOCKET]; // 01-07 for SMBUS address of Vpp //no setup option defined- aj + UINT8 MuxAddress[MAX_IIO_PORTS_PER_SOCKET]; // SMBUS address of MUX //no setup option defined + UINT8 ChannelID[MAX_IIO_PORTS_PER_SOCKET]; // 00 -- channel 0, 01 -- channel 1 //no setup option defined + + UINT8 PciePortEnable[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 PEXPHIDE[MAX_IIO_PORTS_PER_SOCKET]; // Hide any of the DMI or PCIE devices - SKT 0,1,2,3; Device 0-10 PRD + UINT8 HidePEXPMenu[MAX_IIO_PORTS_PER_SOCKET]; // to suppress /display the PCIe port menu + UINT8 PciePortOwnership[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 RetimerConnectCount[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 ConfigIOU[MAX_IOU_PER_SOCKET]; // 00-x4x4x4x4, 01-x4x4x8NA, 02-x8NAx4x4, 03-x8NAx8NA, 04-x16 (P1p2p3p4) + UINT8 PcieHotPlugOnPort[MAX_IIO_PORTS_PER_SOCKET]; // Manual override of hotplug for port + UINT8 VMDEnabled[MAX_VMD_STACKS_PER_SOCKET]; + UINT8 VMDPortEnable[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 VMDHotPlugEnable[MAX_VMD_STACKS_PER_SOCKET]; + UINT8 PcieMaxPayload[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 PciePortLinkSpeed[MAX_IIO_PORTS_PER_SOCKET]; // auto - 0(default); gen1 -1; gen2 -2; ... gen5 -5. + UINT8 DfxDnTxPresetGen3[MAX_IIO_PORTS_PER_SOCKET]; //auto - 0xFF(default); p0 - 0; p1 -1; ... p9 - 9. + UINT8 PcieGlobalAspm; + UINT8 PcieMaxReadRequestSize; +} UPD_IIO_PCIE_PORT_CONFIG; + +typedef struct { + UINT8 Address; + UINT8 Port; + UINT8 MuxAddress; + UINT8 MuxChannel; +} IIO_VPP_CFG; + +typedef struct { + UINT8 Eip : 1; // Electromechanical Interlock Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B17) + UINT8 HotPlugSurprise : 1; // Hot Plug surprise supported - Slot Capabilities (D0-10 / F0 / R0xA4 / B5) + UINT8 PowerInd : 1; // Power Indicator Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B4) + UINT8 AttentionInd : 1; // Attention Inductor Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B3) + UINT8 PowerCtrl : 1; // Power Controller Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B1) + UINT8 AttentionBtn : 1; // Attention Button Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B0) + + UINT8 Reserved : 2; +} IIO_SLOT_CFG; + +typedef struct { + + IIO_VPP_CFG Vpp; + IIO_SLOT_CFG Slot; + + UINT8 VppEnabled :1; + UINT8 VppExpType :1; + + UINT8 SlotImplemented :1; + UINT8 Reserved :4; + + UINT16 HotPlug : 1; // If hotplug is supported on slot connected to this port + UINT16 MrlSensorPresent : 1; // If MRL is present on slot connected to this port + UINT16 SlotPowerLimitScale : 2; // Slot Power Scale for slot connected to this port + UINT16 SlotPowerLimitValue : 12; // Slot Power Value for slot connected to this port + + UINT16 PhysicalSlotNumber; // Slot number for slot connected to this port +} IIO_BOARD_SETTINGS_PER_PORT; + +typedef struct { + struct { + UINT8 Segment; ///< Remember segment, if it changes reset everything + UINT8 StackPciBusPoolSize[MAX_LOGIC_IIO_STACK]; ///< Number of bus numbers needed for IIO stack + } Socket[MAX_SOCKET]; +} SYSTEM_PCI_BUS_CONFIGURATION; + +typedef struct { + UINT64 Base; ///< Base (starting) address of a range (I/O, 32 and 64-bit mmio regions) + UINT64 Limit; ///< Limit (last valid) address of a range +} PCIE_BASE_LIMIT; + +typedef struct { + UINT32 MmioLSize; + UINT64 MmioHSize; +} CXL11_LIMITS; + +typedef struct { + PCIE_BASE_LIMIT Io; ///< Base and limit of I/O range assigned to entity + PCIE_BASE_LIMIT LowMmio; ///< Base and limit of low MMIO region for entity + PCIE_BASE_LIMIT HighMmio; ///< Base and limit of high (64-bit) MMIO region for entity +} PCI_BASE_LIMITS; + +typedef struct { + PCI_BASE_LIMITS SocketLimits; ///< Base and Limit of all PCIe resources for the socket + PCI_BASE_LIMITS StackLimits[MAX_LOGIC_IIO_STACK]; ///< Base and Limit of all PCIe resources for each stack of the socket + CXL11_LIMITS CxlStackReq[MAX_LOGIC_IIO_STACK]; ///< Base and Limit of CXL11 resources for each stack of the socket +} SOCKET_PCI_BASE_LIMITS; + +typedef struct { + // + // Save basic system configuration parameters along with the resource map to detect a change. + // Remember low and high I/O memory range when saving recource configuration. It is used to verify + // whether system memory map changed. Remember also stacks configured when creating the map. + // If anything changed reset the system PCI resource configuration. + // + UINT64 MmioHBase; + UINT64 MmioHGranularity; + UINT32 MmioLBase; + UINT32 MmioLLimit; + UINT32 MmioLGranularity; + UINT16 IoBase; + UINT16 IoLimit; + UINT16 IoGranularity; + UINT32 StackPresentBitmap[MAX_SOCKET]; + // + // Used by the PciHostBridge DXE driver, these variables don't need to be exposed through setup options + // The variables are used as a communication vehicle from the PciHostBridge DXE driver to an OEM hook + // which updates the KTI resource map. + // + SOCKET_PCI_BASE_LIMITS Socket[MAX_SOCKET]; ///< Base and limit of all PCIe resources for each socket +} SYSTEM_PCI_BASE_LIMITS; + +#define IIO_BIFURCATE_xxxxxxxx 0xFE +#define IIO_BIFURCATE_x4x4x4x4 0x0 +#define IIO_BIFURCATE_x4x4xxx8 0x1 +#define IIO_BIFURCATE_xxx8x4x4 0x2 +#define IIO_BIFURCATE_xxx8xxx8 0x3 +#define IIO_BIFURCATE_xxxxxx16 0x4 +#define IIO_BIFURCATE_x2x2x4x8 0x5 +#define IIO_BIFURCATE_x4x2x2x8 0x6 +#define IIO_BIFURCATE_x8x2x2x4 0x7 +#define IIO_BIFURCATE_x8x4x2x2 0x8 +#define IIO_BIFURCATE_x2x2x4x4x4 0x9 +#define IIO_BIFURCATE_x4x2x2x4x4 0xA +#define IIO_BIFURCATE_x4x4x2x2x4 0xB +#define IIO_BIFURCATE_x4x4x4x2x2 0xC +#define IIO_BIFURCATE_x2x2x2x2x8 0xD +#define IIO_BIFURCATE_x8x2x2x2x2 0xE +#define IIO_BIFURCATE_x2x2x2x2x4x4 0xF +#define IIO_BIFURCATE_x2x2x4x2x2x4 0x10 +#define IIO_BIFURCATE_x2x2x4x4x2x2 0x11 +#define IIO_BIFURCATE_x4x2x2x2x2x4 0x12 +#define IIO_BIFURCATE_x4x2x2x4x2x2 0x13 +#define IIO_BIFURCATE_x4x4x2x2x2x2 0x14 +#define IIO_BIFURCATE_x2x2x2x2x2x2x4 0x15 +#define IIO_BIFURCATE_x2x2x2x2x4x2x2 0x16 +#define IIO_BIFURCATE_x2x2x4x2x2x2x2 0x17 +#define IIO_BIFURCATE_x4x2x2x2x2x2x2 0x18 +#define IIO_BIFURCATE_x2x2x2x2x2x2x2x2 0x19 +#define IIO_BIFURCATE_AUTO 0xFF + +typedef enum { + IioBifurcation_UNKNOWN = IIO_BIFURCATE_xxxxxxxx, + IioBifurcation_x4x4x4x4 = IIO_BIFURCATE_x4x4x4x4, + IioBifurcation_x4x4xxx8 = IIO_BIFURCATE_x4x4xxx8, + IioBifurcation_xxx8x4x4 = IIO_BIFURCATE_xxx8x4x4, + IioBifurcation_xxx8xxx8 = IIO_BIFURCATE_xxx8xxx8, + IioBifurcation_xxxxxx16 = IIO_BIFURCATE_xxxxxx16, + IioBifurcation_x2x2x4x8 = IIO_BIFURCATE_x2x2x4x8, + IioBifurcation_x4x2x2x8 = IIO_BIFURCATE_x4x2x2x8, + IioBifurcation_x8x2x2x4 = IIO_BIFURCATE_x8x2x2x4, + IioBifurcation_x8x4x2x2 = IIO_BIFURCATE_x8x4x2x2, + IioBifurcation_x2x2x4x4x4 = IIO_BIFURCATE_x2x2x4x4x4, + IioBifurcation_x4x2x2x4x4 = IIO_BIFURCATE_x4x2x2x4x4, + IioBifurcation_x4x4x2x2x4 = IIO_BIFURCATE_x4x4x2x2x4, + IioBifurcation_x4x4x4x2x2 = IIO_BIFURCATE_x4x4x4x2x2, + IioBifurcation_x2x2x2x2x8 = IIO_BIFURCATE_x2x2x2x2x8, + IioBifurcation_x8x2x2x2x2 = IIO_BIFURCATE_x8x2x2x2x2, + IioBifurcation_x2x2x2x2x4x4 = IIO_BIFURCATE_x2x2x2x2x4x4, + IioBifurcation_x2x2x4x2x2x4 = IIO_BIFURCATE_x2x2x4x2x2x4, + IioBifurcation_x2x2x4x4x2x2 = IIO_BIFURCATE_x2x2x4x4x2x2, + IioBifurcation_x4x2x2x2x2x4 = IIO_BIFURCATE_x4x2x2x2x2x4, + IioBifurcation_x4x2x2x4x2x2 = IIO_BIFURCATE_x4x2x2x4x2x2, + IioBifurcation_x4x4x2x2x2x2 = IIO_BIFURCATE_x4x4x2x2x2x2, + IioBifurcation_x2x2x2x2x2x2x4 = IIO_BIFURCATE_x2x2x2x2x2x2x4, + IioBifurcation_x2x2x2x2x4x2x2 = IIO_BIFURCATE_x2x2x2x2x4x2x2, + IioBifurcation_x2x2x4x2x2x2x2 = IIO_BIFURCATE_x2x2x4x2x2x2x2, + IioBifurcation_x4x2x2x2x2x2x2 = IIO_BIFURCATE_x4x2x2x2x2x2x2, + IioBifurcation_x2x2x2x2x2x2x2x2 = IIO_BIFURCATE_x2x2x2x2x2x2x2x2, + IioBifurcation_Auto = IIO_BIFURCATE_AUTO +} IIO_BIFURCATION; + +typedef struct { + IIO_BIFURCATION Bifurcation; + UINT8 CxlSupportInUba :1; + UINT8 Reserved :7; + + IIO_BOARD_SETTINGS_PER_PORT Port[MAX_IIO_PORTS_PER_STACK]; +} IIO_BOARD_SETTINGS_PER_PE; + +typedef struct { + IIO_BOARD_SETTINGS_PER_PE Pe[MAX_IIO_PCIE_PER_SOCKET]; +} IIO_BOARD_SETTINGS_PER_SOCKET; + +typedef struct { + IIO_BOARD_SETTINGS_PER_SOCKET Socket[MAX_SOCKET]; +} IIO_BOARD_SETTINGS_HOB; + +#pragma pack() + +#endif // _IIO_PCIE_CONFIG_UPD_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/IioUniversalDataHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/IioUniversalDataHob.h new file mode 100644 index 0000000000..1689a4261b --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/IioUniversalDataHob.h @@ -0,0 +1,347 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _IIO_UNIVERSAL_DATA_HOB_H_ +#define _IIO_UNIVERSAL_DATA_HOB_H_ + +#define DINO_UID 0 +#define PC_UID 1 +#define UB_UID 4 +#define CPM0_UID 5 +#define HQM0_UID 6 + +#define IIO_UNIVERSAL_DATA_GUID { \ + 0xa1, 0x96, 0xf3, 0x7f, 0x7d, 0xee, 0x1e, 0x43, \ + 0xba, 0x53, 0x8f, 0xCa, 0x12, 0x7c, 0x44, 0xc0 \ +} + +#ifndef MAX_SOCKET +#define MAX_SOCKET 4 +#endif + +#if (MAX_SOCKET == 1) + #define MAX_FW_KTI_PORTS 4 // Maximum KTI PORTS to be used in structure definition. +#else + #define MAX_FW_KTI_PORTS 6 // Maximum KTI PORTS to be used in structure definition +#endif //(MAX_SOCKET == 1) + +#ifndef MAX_IMC +#define MAX_IMC 4 // Maximum memory controllers per socket +#endif + +#ifndef MAX_MC_CH +#define MAX_MC_CH 2 // Max number of channels per MC (3 for EP) +#endif + +#ifndef MAX_CH +#define MAX_CH ((MAX_IMC)*(MAX_MC_CH)) // Max channels per socket (worst case EP * EX combination = 16) +#endif + +#define MC_MAX_NODE (MAX_SOCKET * MAX_IMC) // Max number of memory nodes + +#ifndef MAX_IIO_PORTS_PER_SOCKET +#define MAX_IIO_PORTS_PER_SOCKET 57 +#endif + +#ifndef MAX_IIO_PORTS_PER_STACK +#define MAX_IIO_PORTS_PER_STACK 8 +#endif + +#ifndef MAX_IIO_PCIE_PER_SOCKET +#define MAX_IIO_PCIE_PER_SOCKET 1 +#endif + +#ifndef MAX_IIO_PCIROOTS_PER_STACK +#define MAX_IIO_PCIROOTS_PER_STACK 1 +#endif + +#ifndef MAX_IIO_STACK +#define MAX_IIO_STACK 12 +#endif + +#define MAX_LOGIC_IIO_STACK 14 + +#define MAX_COMPUTE_DIE 1 +#define MAX_CHA_MAP (2 * MAX_COMPUTE_DIE) //for GNR & SRF only, each compute die has its own CAPID6 & CAPID7 (i.e. 2 CAPID registers) + +#pragma pack(1) + +typedef struct _UINT64_STRUCT { + UINT32 lo; + UINT32 hi; +} UINT64_STRUCT, *PUINT64_STRUCT; + +#ifndef MMIO_BARS_ENUM +#define MMIO_BARS_ENUM +typedef enum { + TYPE_SCF_BAR = 0, + TYPE_PCU_BAR, + TYPE_MEM_BAR0, + TYPE_MEM_BAR1, + TYPE_MEM_BAR2, + TYPE_MEM_BAR3, + TYPE_MEM_BAR4, + TYPE_MEM_BAR5, + TYPE_MEM_BAR6, + TYPE_MEM_BAR7, + TYPE_SBREG_BAR, + TYPE_MAX_MMIO_BAR +} MMIO_BARS; +#endif + +typedef struct { + UINT8 Device; + UINT8 Function; +} IIO_PORT_INFO; + +typedef struct { + UINT8 Major; + UINT8 Minor; + UINT8 Revision; + UINT16 BuildNumber; +} RC_VERSION; + +//--------------------------------------------------------------------------------------// +// Structure definitions for Universal Data Store (UDS) +//--------------------------------------------------------------------------------------// +typedef struct { + UINT8 Valid; // TRUE, if the link is valid (i.e reached normal operation) + UINT8 PeerSocId; // Socket ID + UINT8 PeerSocType; // Socket Type (0 - CPU; 1 - IIO) + UINT8 PeerPort; // Port of the peer socket +} QPI_PEER_DATA; + +typedef struct { + UINT8 Valid; + UINT32 MmioBar[TYPE_MAX_MMIO_BAR]; + UINT8 PcieSegment; + UINT64_STRUCT SegMmcfgBase; + UINT32 StackPresentBitmap; + UINT16 CxlPresentBitmap; + UINT16 Cxl20CapableBitmap; + UINT8 TotM3Kti; + UINT8 TotCha; + UINT32 ChaList[MAX_CHA_MAP]; + UINT32 SocId; + QPI_PEER_DATA PeerInfo[MAX_FW_KTI_PORTS]; // QPI LEP info +} QPI_CPU_DATA; + +typedef struct { + UINT8 Valid; + UINT8 SocId; + QPI_PEER_DATA PeerInfo[MAX_SOCKET]; // QPI LEP info +} QPI_IIO_DATA; + +typedef struct { + IIO_PORT_INFO PortInfo[MAX_IIO_PORTS_PER_SOCKET]; +} IIO_DMI_PCIE_INFO; + +typedef struct _STACK_RES { + UINT8 Personality; + UINT8 BusBase; // Base of Bus configured for this stack + UINT8 BusLimit; // Limit of Bus configured for this stack + UINT16 IoBase; // Base of IO configured for this stack + UINT16 IoLimit; // Limit of IO configured for this stack + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this stack in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this stack in memory map + UINT64 Mmio64Base; // Base of high MMIO configured for this stack in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this stack in memory map + UINT8 PciResourceBusBase; // Base of Bus resource available for PCI devices + UINT8 PciResourceBusLimit; // Limit of Bus resource available for PCI devices + UINT16 PciResourceIoBase; // Base of IO resource available for PCI devices + UINT16 PciResourceIoLimit; // Limit of IO resource available for PCI devices + UINT32 PciResourceMem32Base; // Base of low MMIO resource available for PCI devices + UINT32 PciResourceMem32Limit; // Limit of low MMIO resource available for PCI devices + UINT64 PciResourceMem64Base; // Base of high MMIO resource available for PCI devices + UINT64 PciResourceMem64Limit; // Limit of high MMIO resource available for PCI devices + UINT32 VtdBarAddress; // NOTE: Obsolete, not used in next gen platforms +} STACK_RES; + +/** + * PCI resources that establish one PCI hierarchy for PCI Enumerator. + */ +typedef struct { + UINT16 UidType; // Type of UID for this root bridge. + UINT8 BusBase; // Base of PCI bus numbers available for PCI devices + UINT8 BusLimit; // Limit of PCI bus numbers available for PCI devices + UINT16 IoBase; // Base of IO resources available for PCI devices + UINT16 IoLimit; // Limit of IO resources available for PCI devices + UINT32 Mmio32Base; // Base of low MMIO resources available for PCI devices + UINT32 Mmio32Limit; // Limit of low MMIO resources available for PCI devices + UINT64 Mmio64Base; // Base of high MMIO resources available for PCI devices + UINT64 Mmio64Limit; // Limit of high MMIO resources available for PCI devices +} UDS_PCIROOT_RES; + +typedef struct { + UINT8 Personality; + UINT8 PciRootBridgeNum; // Number of valid entries in PciRoot[] table + UINT8 BusBase; // Base of Bus configured for this stack + UINT8 BusLimit; // Limit of Bus configured for this stack + UINT16 IoBase; // Base of IO configured for this stack + UINT16 IoLimit; // Limit of IO configured for this stack + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this stack in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this stack in memory map + UINT32 Mmio32MinSize; // The size of MMIO32 needed in PEI that must be preserved in rebalance + UINT64 Mmio64Base; // Base of high MMIO configured for this stack in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this stack in memory map + UDS_PCIROOT_RES PciRoot[MAX_IIO_PCIROOTS_PER_STACK]; + UINT64 VtbarAddress; // VT-d Base Address +} UDS_STACK_RES; + +typedef struct { + UINT8 Valid; + UINT8 SocketID; // Socket ID of the IIO (0..3) + UINT8 BusBase; + UINT8 BusLimit; + UINT16 IoBase; + UINT16 IoLimit; + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this socket in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this socket in memory map + UINT64 Mmio64Base; // Base of high MMIO configured for this socket in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this socket in memory map + UDS_STACK_RES StackRes[MAX_LOGIC_IIO_STACK]; +} UDS_SOCKET_RES; + +typedef struct { + UINT8 Valid; + UINT8 SocketID; // Socket ID of the IIO (0..3) + UINT8 BusBase; + UINT8 BusLimit; + UINT16 PciResourceIoBase; + UINT16 PciResourceIoLimit; + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this socket in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this socket in memory map + UINT64 Mmio64Base; // Base of high MMIO configured for this socket in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this socket in memory map + UDS_STACK_RES StackRes[MAX_LOGIC_IIO_STACK]; + IIO_DMI_PCIE_INFO PcieInfo; // NOTE: Obsolete, not used in next gen platforms +} IIO_RESOURCE_INSTANCE; + +typedef struct { + UINT16 PlatGlobalIoBase; // Global IO Base + UINT16 PlatGlobalIoLimit; // Global IO Limit + UINT32 PlatGlobalMmio32Base; // Global Mmiol base + UINT32 PlatGlobalMmio32Limit; // Global Mmiol limit + UINT64 PlatGlobalMmio64Base; // Global Mmioh Base [43:0] + UINT64 PlatGlobalMmio64Limit; // Global Mmioh Limit [43:0] + QPI_CPU_DATA CpuQpiInfo[MAX_SOCKET]; // QPI related info per CPU + QPI_IIO_DATA IioQpiInfo[MAX_SOCKET]; // QPI related info per IIO + UINT32 MemTsegSize; + UINT64 PciExpressBase; + UINT32 PciExpressSize; + UINT32 MemTolm; + UDS_SOCKET_RES IIO_resource[MAX_SOCKET]; + UINT8 numofIIO; + UINT8 MaxBusNumber; + UINT32 packageBspApicID[MAX_SOCKET]; // This data array is valid only for SBSP, not for non-SBSP CPUs. <AS> for CpuSv + UINT8 EVMode; + UINT8 SkuPersonality[MAX_SOCKET]; + UINT16 IoGranularity; + UINT32 MmiolGranularity; + UINT64_STRUCT MmiohGranularity; + UINT8 RemoteRequestThreshold; //5370389 + UINT32 UboxMmioSize; + UINT32 MaxAddressBits; +} PLATFORM_DATA; + +typedef struct { + UINT8 CurrentUpiiLinkSpeed;// Current programmed UPI Link speed (Slow/Full speed mode) + UINT8 CurrentUpiLinkFrequency; // Current requested UPI Link frequency (in GT) + UINT8 OutKtiCpuSktHotPlugEn; // 0 - Disabled, 1 - Enabled for PM X2APIC + UINT32 OutKtiPerLinkL1En[MAX_SOCKET]; // output kti link enabled status for PM + UINT8 IsocEnable; + UINT32 meRequestedSize; // Size of the memory range requested by ME FW, in MB + UINT8 DmiVc1; + UINT8 DmiVcm; + UINT32 CpuPCPSInfo; + UINT8 cpuSubType; + UINT8 SystemRasType; + UINT8 numCpus; // 1,..4. Total number of CPU packages installed and detected (1..4)by QPI RC + UINT16 tolmLimit; + RC_VERSION RcVersion; + BOOLEAN MsrTraceEnable; + UINT8 DdrXoverMode; // DDR 2.2 Mode + // For RAS + UINT8 bootMode; + UINT8 OutClusterOnDieEn; // Whether RC enabled COD support + UINT8 OutSncEn; + UINT8 OutNumOfCluster; + UINT8 imcEnabled[MAX_SOCKET][MAX_IMC]; + UINT16 LlcSizeReg; + UINT8 chEnabled[MAX_SOCKET][MAX_CH]; + UINT8 memNode[MC_MAX_NODE]; + UINT8 IoDcMode; + UINT8 DfxRstCplBitsEn; + UINT8 BitsUsed; //For 5 Level Paging +} SYSTEM_STATUS; + +typedef struct { + PLATFORM_DATA PlatformData; + SYSTEM_STATUS SystemStatus; + UINT32 OemValue; +} IIO_UDS; + +typedef enum { + //for ICX + IioStack0 = 0, // DmiAsPcie + IioStack1 = 1, // IOU0 + IioStack2 = 2, // IOU1 + IioStack3 = 3, // IOU2 + IioStack4 = 4, // IOU3 + IioStack5 = 5, // IOU4 + //for SPR + IioStack6 = 6, // IOU5 + IioStack7 = 7, + IioStack8 = 8, + IioStack9 = 9, + IioStack10 = 10, + IioStack11 = 11, + //for later SOC + IioStack12 = 12, + IioStack13 = 13, + IioStack14 = 14, + IioStack15 = 15, + IioStack16 = 16, + IioStack17 = 17, + IioStack18 = 18, + IioStackUnknown = 0xFF +} IIO_STACK; + +#pragma pack() + +#endif //#ifndef _IIO_UNIVERSAL_DATA_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/MemoryMapDataHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/MemoryMapDataHob.h new file mode 100644 index 0000000000..ce47106fe0 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/MemoryMapDataHob.h @@ -0,0 +1,370 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _MEMORY_MAP_DATA_HOB_H_ +#define _MEMORY_MAP_DATA_HOB_H_ + +#define MEMORY_MAP_HOB_GUID { 0xf8870015, 0x6994, 0x4b98, { 0x95, 0xa2, 0xbd, 0x56, 0xda, 0x91, 0xc0, 0x7f } } + +#ifndef MAX_SOCKET +#define MAX_SOCKET 4 +#endif + +#ifndef MAX_IMC +#define MAX_IMC 4 // Maximum memory controllers per socket +#endif + +#ifndef MAX_MC_CH +#define MAX_MC_CH 2 // Max number of channels per MC (3 for EP) +#endif + +#ifndef MAX_CH +#define MAX_CH ((MAX_IMC)*(MAX_MC_CH)) // Max channels per socket (worst case EP * EX combination = 16) +#endif + +#define MAX_CXL_AMT 0 + +#ifndef MAX_UNIQUE_NGN_DIMM_INTERLEAVE +#define MAX_UNIQUE_NGN_DIMM_INTERLEAVE 2 // Max number of unique interleaves for NGN DIMM +#endif + +#ifndef MAX_SPARE_RANK +#define MAX_SPARE_RANK 2 // Max number of spare ranks in a channel +#endif + +#ifndef MAX_HBM_IO +#define MAX_HBM_IO 4 +#endif + +#ifndef MAX_DIMM +#define MAX_DIMM 2 // Max DIMM per channel +#endif + +#ifndef MAX_RANK_DIMM +#define MAX_RANK_DIMM 2 +#endif + +#ifndef MAX_DRAM_CLUSTERS +#define MAX_DRAM_CLUSTERS 4 +#endif + +#ifndef MAX_SAD_RULES +#define MAX_SAD_RULES 16 +#endif + +#ifndef MAX_FPGA_REMOTE_SAD_RULES +#define MAX_FPGA_REMOTE_SAD_RULES 2 // Maximum FPGA sockets exists on ICX platform +#endif + +#define MAX_SI_SOCKET 8 // Maximum silicon supported socket number + +#define MAX_AMT (MAX_IMC+MAX_CXL_AMT) // Max abstract memory target per socket +#define AMT_MAX_NODE ((MAX_AMT)*(MAX_SOCKET)) // Max abstract memory target for all sockets + +// NGN +#define NGN_MAX_SERIALNUMBER_STRLEN 4 +#define NGN_MAX_PARTNUMBER_STRLEN 30 +#define NGN_FW_VER_LEN 4 +#define NGN_LOG_TYPE_NUM 2 +#define NGN_LOG_LEVEL_NUM 2 + +/** + * Memory channel index conversion macros. + * + * We got two types of memory channel indexes: + * - socket channel - indexes 0..MAX_CH, used in [socket][channel] indexing + * - IMC channel - indexes 0..MAX_MC_CH, used in [socket][IMC][channel] indexing + * The below defined macros convert one channel index to the other one. + */ +#define MEM_SKTCH_TO_IMC(SktCh) ((SktCh) / MAX_MC_CH) +#define MEM_SKTCH_TO_IMCCH(SktCh) ((SktCh) % MAX_MC_CH) +#define MEM_IMCCH_TO_SKTCH(Imc, Ch) ((Imc) * MAX_MC_CH + (Ch)) + +#define MEM_64MB_TO_BYTES(Size64M) ((UINT64)(Size64M) << 26) +#define MEM_64MB_TO_KBYTES(Size64M) ((UINT64)(Size64M) << 16) +#define MEM_64MB_TO_MBYTES(Size64M) ((UINT64)(Size64M) << 6) +#define MEM_64MB_TO_GBYTES(Size64M) ((Size64M) >> 4) +#define MEM_BYTES_TO_64MB(SizeB) ((SizeB) >> 26) +#define MEM_KBYTES_TO_64MB(SizeKB) ((SizeKB) >> 16) +#define MEM_MBYTES_TO_64MB(SizeMB) ((SizeMB) >> 6) + +typedef UINT8 CXL_INTLV_SET_KEY; + +#define FSP_RESERVED1_LEN 77 +#define FSP_RESERVED2_LEN 2174 +#define FSP_RESERVED3_LEN 21 +#define FSP_RESERVED4_LEN 130 +#define FSP_RESERVED5_LEN 10 +#define FSP_RESERVED6_LEN 800 +#pragma pack(1) + +typedef enum { + DIMM_RANK_MAP_OUT_UNKNOWN = 0, + DIMM_RANK_MAP_OUT_MEM_DECODE, + DIMM_RANK_MAP_OUT_POP_POR_VIOLATION, + DIMM_RANK_MAP_OUT_RANK_DISABLED, + DIMM_RANK_MAP_OUT_ADVMEMTEST_FAILURE, + DIMM_RANK_MAP_OUT_MAX +} DIMM_RANK_MAP_OUT_REASON; + +struct RankDevice { + UINT8 enabled; // 0 = disabled, 1 = enabled + UINT8 logicalRank; // Logical Rank number (0 - 7) + UINT16 rankSize; // Units of 64 MB +}; + +struct PersisentDpaMap +{ + UINT32 perRegionDPAOffset; + UINT32 SPALimit; +}; + +typedef struct firmwareRev { + UINT8 majorVersion; + UINT8 minorVersion; + UINT8 hotfixVersion; + UINT16 buildVersion; +} FIRMWARE_REV; + +typedef struct DimmDevice { + UINT8 Present; + BOOLEAN Enabled; + UINT8 DcpmmPresent; // 1 - This is a DCPMM + UINT8 X4Present; + UINT8 DramIoWidth; // Actual DRAM IO Width (4, 8, 16) + UINT8 NumRanks; + UINT8 keyByte; + UINT8 actKeyByte2; // Actual module type reported by SPD + UINT8 actSPDModuleOrg; // Actual number of DRAM ranks and device width + UINT8 dimmTs; // Thermal sensor data. + UINT16 VolCap; // Volatile capacity (AEP DIMM only) + UINT16 nonVolCap; // Non-volatile capacity (AEP DIMM only) + UINT16 DimmSize; + UINT32 NVmemSize; + UINT16 SPDMMfgId; // Module Mfg Id from SPD + UINT16 VendorID; + UINT16 DeviceID; + UINT16 RevisionID; + UINT32 perRegionDPA; // DPA of PMEM that Nfit needs + struct PersisentDpaMap perDPAMap[MAX_UNIQUE_NGN_DIMM_INTERLEAVE]; // DPA map + UINT8 serialNumber[NGN_MAX_SERIALNUMBER_STRLEN]; // Serial Number + UINT8 PartNumber[NGN_MAX_PARTNUMBER_STRLEN]; // Part Number + UINT8 FirmwareVersionStr[NGN_FW_VER_LEN]; // Used to update the SMBIOS TYPE 17 + struct firmwareRev FirmwareVersion; // Firmware revision + struct RankDevice rankList[MAX_RANK_DIMM]; + UINT16 InterfaceFormatCode; + UINT16 SubsystemVendorID; + UINT16 SubsystemDeviceID; + UINT16 SubsystemRevisionID; + UINT16 FisVersion; // Firmware Interface Specification version + UINT8 DimmSku; // Dimm SKU info + UINT8 manufacturingLocation; // Manufacturing location for the NVDIMM + UINT16 manufacturingDate; // Date the NVDIMM was manufactured + INT32 commonTck; + UINT8 EnergyType; // 0: 12V aux power; 1: dedicated backup energy source; 2: no backup energy source + BOOLEAN NvDimmNPresent; // JEDEC NVDIMM-N Type Memory Present + UINT8 CidBitMap; // SubRankPer CS for DIMM device + UINT16 SPDRegVen; // Register Vendor ID in SPD + DIMM_RANK_MAP_OUT_REASON MapOutReason; +} MEMMAP_DIMM_DEVICE_INFO_STRUCT; + +struct ChannelDevice { + UINT8 Enabled; // 0 = channel disabled, 1 = channel enabled + UINT8 Features; // Bit mask of features to enable or disable + UINT8 MaxDimm; // Number of DIMM + UINT8 NumRanks; // Number of ranks on this channel + UINT8 chFailed; + UINT8 ngnChFailed; + UINT8 Is9x4DimmPresent; // 9x4 dimm present indicator + UINT8 SpareLogicalRank[MAX_SPARE_RANK]; // Logical rank, selected as Spare + UINT8 SparePhysicalRank[MAX_SPARE_RANK]; // Physical rank, selected as spare + UINT16 SpareRankSize[MAX_SPARE_RANK]; // spare rank size + UINT8 EnabledLogicalRanks; // Bitmap of Logical ranks that are enabled + UINT8 DdrPopulationMap; // Bitmap to indicate location of DDR DIMMs within the channel memory slots (BIT0: Ch.D0, BIT1: CH.D1) + UINT8 PmemPopulationMap; // Bitmap to indicate location of PMem modules within the channel memory slots (BIT0: Ch.D0, BIT1: CH.D1) + MEMMAP_DIMM_DEVICE_INFO_STRUCT DimmInfo[MAX_DIMM]; +}; + +struct memcontroller { + UINT32 MemSize; +}; + +typedef enum { + MemTypeNone = 0, + MemType1lmDdr, + MemType1lmAppDirect, + MemType1lmAppDirectReserved, + MemType1lmCtrl, + MemType1lmHbm, + MemTypeNxm, + MemType2lmDdrCacheMemoryMode, + MemType2lmDdrWbCacheAppDirect, + MemType2lmHbmCacheDdr, + MemType2lmHbmCacheMemoryMode, + MemTypeCxlAccVolatileMem, + MemTypeCxlAccPersistentMem, + MemTypeFpga, + MemTypeCxlExpVolatileMem, + MemTypeCxlExpPersistentMem, + MemTypeCxl2lmDdrCacheMem, + MemTypeCxlHetero, + MemTypeMax +} MEM_TYPE; + +typedef struct SADTable { + UINT8 Enable; // Rule enable + MEM_TYPE type; // Bit map of memory region types, See defines 'MEM_TYPE_???' above for bit definitions of the ranges. + UINT8 granularity; // Interleave granularities for current SAD entry. Possible interleave granularity options depend on the SAD entry type. Note that SAD entry type BLK Window and CSR/Mailbox/Ctrl region do not support any granularity options + UINT32 Base; // Base of the current SAD entry + UINT32 Limit; // Limit of the current SAD entry + UINT8 ways; // Interleave ways for SAD + UINT8 channelInterBitmap[MAX_AMT]; //Bit map to denote which DDR4/NM channels are interleaved per IMC eg: 111b - Ch 2,1 & 0 are interleaved; 011b denotes Ch1 & 0 are interleaved + UINT8 FMchannelInterBitmap[MAX_AMT]; //Bit map to denote which FM channels are interleaved per IMC eg: 111b - Ch 2,1 & 0 are interleaved; 011b denotes Ch1 & 0 are interleaved + UINT8 NmChWays; // Channel Interleave ways for SAD. Represents channelInterBitmap ways for DDR4/NM. + UINT8 FmChWays; // Channel Interleave ways for SAD. Represents FMchannelInterBitmap ways for DDRT. + UINT16 imcInterBitmap; // Bit map to denote which IMCs are interleaved from this socket. + UINT16 NmImcInterBitmap; // Bit map to denote which IMCs are interleaved from this socket as NM. + BOOLEAN local; // 0 - Remote 1- Local + UINT8 IotEnabled; // To indicate if IOT is enabled + UINT8 mirrored; // To Indicate the SAD is mirrored while enabling partial mirroring + UINT8 Attr; + UINT8 tgtGranularity; // Interleave mode for target list + UINT8 Cluster; // SNC cluster, hemisphere, or quadrant index. + UINT8 HostBridgeGran; // Host bridge interleaving granularity. + UINT32 HotPlugPadSize; // Memory size padded for CXL hot plug. 0 if it is not a CXL hot plug SAD. + CXL_INTLV_SET_KEY CxlIntlvSetKey; // The unique key of CXL interleave set. (7nm) +} SAD_TABLE; + +typedef struct socket { + UINT8 SocketEnabled; + UINT32 IioStackBitmap; + BOOLEAN HbmIoEn[MAX_HBM_IO]; // Flag indicates if HBM IO is enabled. TRUE: HBM IO is Enabled, FALSE: HBM IO is disabled. + UINT8 imcEnabled[MAX_IMC]; + UINT8 SadIntList[MAX_DRAM_CLUSTERS * MAX_SAD_RULES][AMT_MAX_NODE]; // SAD interleave list + UINT32 SktTotMemMapSPA; // Total memory mapped to SPA + UINT32 SktMemSize2LM; // Total memory excluded from Limit + SAD_TABLE SAD[MAX_DRAM_CLUSTERS * MAX_SAD_RULES]; // SAD table + struct memcontroller imc[MAX_IMC]; + struct ChannelDevice ChannelInfo[MAX_CH]; +} MEMMAP_SOCKET; + +typedef struct { + UINT8 Enabled; // Indicates if this EDC is enabled + UINT32 MemAsCache; // Memory used as Cache, in 64MB units + UINT32 MemAsFlat; // Memory used as Flat memory, in 64MB units +} EDC_INFO; + +typedef struct SystemMemoryMapElement { + UINT16 Type; // Type of this memory element; Bit0: 1LM Bit1: 2LM Bit2: PMEM Bit3: PMEM-cache Bit4: BLK Window Bit5: CSR/Mailbox/Ctrl region + UINT8 NodeId; // Node ID of the HA Owning the memory + UINT8 SocketId; // Socket Id of socket that has his memory - ONLY IN NUMA + UINT8 SktInterBitmap; // Socket interleave bitmap, if more that on socket then ImcInterBitmap and ChInterBitmap are identical in all sockets + UINT16 ImcInterBitmap; // IMC interleave bitmap for this memory + UINT8 ChInterBitmap[MAX_IMC];//Bit map to denote which channels are interleaved per IMC eg: 111b - Ch 2,1 & 0 are interleaved; 011b denotes Ch1 & 0 are interleaved + UINT32 BaseAddress; // Base Address of the element in 64MB chunks + UINT32 ElementSize; // Size of this memory element in 64MB chunks +} SYSTEM_MEMORY_MAP_ELEMENT; + +typedef struct SystemMemoryMapHob { + // + // Total Clusters. In SNC2 mode there are 2 clusters and SNC4 mode has 4 clusters. + // All2All/Quad/Hemi modes can be considered as having only one cluster (i.e SNC1). + // + UINT8 TotalClusters; + + UINT8 reserved1[FSP_RESERVED1_LEN]; // MEMORY_MAP_BLOCK_DECODER_DATA BlockDecoderData; // block decoder data structure + UINT32 lowMemBase; // Mem base in 64MB units for below 4GB mem. + UINT32 lowMemSize; // Mem size in 64MB units for below 4GB mem. + UINT32 highMemBase; // Mem base in 64MB units for above 4GB mem. + UINT32 highMemSize; // Mem size in 64MB units for above 4GB mem. + UINT32 memSize; // Total physical memory size + UINT16 memFreq; // Mem Frequency + UINT16 HbmFreq; // HBM Frequency in MHz. + UINT8 memMode; // 0 - Independent, 1 - Lockstep + UINT8 volMemMode; // 0 - 1LM, 1 - 2LM + UINT8 CacheMemType; // 0 - DDR$DDRT, 1 - HBM$DDR. Only valid if volMemMode is 2LM + UINT16 DramType; + UINT8 DdrVoltage; + BOOLEAN SupportedPMemPresent; // TRUE if at least one PMem is present and supported by BIOS + BOOLEAN EkvPresent; // Set if EKV controller on system + BOOLEAN BwvPresent; // Set if BWV controller on system + BOOLEAN CwvPresent; // Set if CWV controller on system + UINT8 XMPProfilesSup; + UINT8 XMPCapability; + // + // HBM Specific Info. + // + UINT16 HbmInstances[MAX_SOCKET]; // Total HBM instances + UINT32 HbmFlatMemSize; // Total HBM memory size in 64MB units, if HBM used as Flat memory + UINT32 HbmCacheMemSize; // Total HBM memory used as cache, if HBM used as Cache memory + UINT16 HbmSpeed; // Configured HBM (i.e OPIO channel) speed in MT/s. + UINT16 MaxHbmSpeed; // Max HBM (i.e OPIO channel) speed in MT/s. + UINT8 SystemRasType; + UINT8 RasModesEnabled; // RAS modes that are enabled + UINT16 ExRasModesEnabled; // Extended RAS modes that are enabled + UINT8 sncEnabled; // 0 - SNC disabled for this configuration, 1 - SNC enabled for this configuration + UINT8 NumOfCluster; + UINT8 NumChPerMC; + UINT8 numberEntries; // Number of Memory Map Elements + SYSTEM_MEMORY_MAP_ELEMENT Element[(MAX_SOCKET * MAX_DRAM_CLUSTERS * MAX_SAD_RULES) + MAX_FPGA_REMOTE_SAD_RULES]; + UINT8 reserved2[FSP_RESERVED2_LEN]; // struct memSetup MemSetup; + UINT8 reserved3[FSP_RESERVED3_LEN]; // MEM_DFXMEMVARS DfxMemVar; + MEMMAP_SOCKET Socket[MAX_SOCKET]; + UINT8 reserved4[FSP_RESERVED4_LEN]; // struct memTiming profileMemTime[XMP_MAX_PROFILES]; + + UINT8 reserved5[FSP_RESERVED5_LEN]; // RASMEMORYINFO RasMeminfo; + UINT8 LatchSystemShutdownState; + BOOLEAN IsWpqFlushSupported; + UINT8 EadrSupport; + UINT8 EadrCacheFlushMode; + UINT8 SetSecureEraseSktChHob[MAX_SOCKET][MAX_CH]; //MAX_CH * MAX_SOCKET * MAX_DCPMM_CH + UINT8 reserved6[FSP_RESERVED6_LEN]; // HOST_DDRT_DIMM_DEVICE_INFO_STRUCT HostDdrtDimmInfo[MAX_SOCKET][MAX_CH]; + UINT32 DdrCacheSize[MAX_SOCKET][MAX_CH]; // Size of DDR memory reserved for 2LM cache (64MB granularity) + BOOLEAN AdrStateForPmemModule[MAX_SOCKET][MAX_CH]; // ADR state for Intel PMEM Modules + UINT16 BiosFisVersion; // Firmware Interface Specification version currently supported by BIOS + UINT16 MaxAveragePowerLimit; // Max Power limit in mW used for averaged power ( Valid range ends at 15000mW) + UINT16 MinAveragePowerLimit; // Min Power limit in mW used for averaged power ( Valid range starts from 10000mW) + UINT16 CurrAveragePowerLimit; // Current Power limit in mW used for average power + UINT16 MaxMbbPowerLimit; // Max MBB power limit ( Valid range ends at 18000mW). + UINT16 MinMbbPowerLimit; // Min MBB power limit ( Valid range starts from 15000mW). + UINT16 CurrMbbPowerLimit; // Current Power limit in mW used for MBB power + UINT32 MaxMbbAveragePowerTimeConstant; // Max MBB Average Power Time Constant + UINT32 MinMbbAveragePowerTimeConstant; // Min MBB Average Power Time Constant + UINT32 CurrMbbAveragePowerTimeConstant; // Current MBB Average Power Time Constant + UINT32 MmiohBase; // MMIOH base in 64MB granularity + UINT8 MaxSadRules; // Maximum SAD entries supported by silicon (24 for 14nm silicon, 16 for 10nm silicon) + UINT8 NumberofChaDramClusters; // Number of CHA DRAM decoder clusters + BOOLEAN VirtualNumaEnable; // Enable or Disable Virtual NUMA + UINT8 VirtualNumOfCluster; // Number of Virtual NUMA nodes in each physical NUMA node (Socket or SNC cluster) +} SYSTEM_MEMORY_MAP_HOB; + +#pragma pack() + +#endif // _MEMORY_MAP_DATA_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/PrevBootErrSrcHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/PrevBootErrSrcHob.h new file mode 100644 index 0000000000..f1d55542c3 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/PrevBootErrSrcHob.h @@ -0,0 +1,85 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _PREV_BOOT_ERR_SRC_HOB_H_ +#define _PREV_BOOT_ERR_SRC_HOB_H_ + +#define FSP_PREV_BOOT_ERR_SRC_HOB_GUID \ +{ 0xc5, 0xb5, 0x38, 0x51, 0x69, 0x93, 0xec, 0x48, 0x5b, 0x97, 0x38, 0xa2, 0xf7, 0x09, 0x66, 0x75 } + +#define PREV_BOOT_ERR_SRC_HOB_SIZE 1000 + +#pragma pack(1) + +typedef struct { +UINT16 Length; // Actual size of the error sources used in the HOB +UINT8 HobData[PREV_BOOT_ERR_SRC_HOB_SIZE -2]; // List of Error source structures of format //MCBANK_ERR_INFO or CSR_ERR_INFO +}PREV_BOOT_ERR_SRC_HOB; + +typedef struct{ +UINT8 Type; // McBankType = 1; +UINT8 Segment; +UINT8 Socket; +UINT16 ApicId; // ApicId is Needed only if it a core McBank. +UINT16 McBankNum; +UINT64 McBankStatus; +UINT64 McbankAddr; +UINT64 McBankMisc; +} MCBANK_ERR_INFO; + +typedef struct { +UINT8 Type; // PciExType =2 ; +UINT8 Segment; +UINT8 Bus; +UINT8 Device; +UINT8 Function; +UINT32 AerUncErrSts; +UINT8 AerHdrLogData[16]; +} PCI_EX_ERR_INFO; + +typedef struct { +UINT8 Type; // Other Csr error type =3 ; +UINT8 Segment; +UINT8 Bus; +UINT8 Device; +UINT8 Function; +UINT16 offset; +UINT32 Value; +} CSR_ERR_INFO; + +typedef enum { + McBankType = 1, + PciExType, + CsrOtherType +} ERROR_ACCESS_TYPE; + +#pragma pack() + +#endif //_PREV_BOOT_ERR_SRC_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/SystemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/SystemInfoHob.h new file mode 100644 index 0000000000..b6d88f5c30 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/ap/SystemInfoHob.h @@ -0,0 +1,283 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _SYSTEM_INFO_HOB_H_ +#define _SYSTEM_INFO_HOB_H_ + +#define SYSTEM_INFO_HOB_GUID { 0x7650A0F2, 0x0D91, 0x4B0C, { 0x92, 0x3B, 0xBD, 0xCF, 0x22, 0xD1, 0x64, 0x35 }} + +#ifndef MAX_SOCKET +#define MAX_SOCKET 4 +#endif + +#ifndef MAX_IIO_STACK +#define MAX_IIO_STACK 12 +#endif + +#define MAX_LOGIC_IIO_STACK 14 + +#ifndef MAX_IMC +#define MAX_IMC 4 // Maximum memory controllers per socket +#endif + +#ifndef MAX_MC_CH +#define MAX_MC_CH 2 // Max number of channels per MC (3 for EP) +#endif + +#ifndef MAX_CH +#define MAX_CH ((MAX_IMC)*(MAX_MC_CH)) // Max channels per socket (worst case EP * EX combination = 16) +#endif + +#define MAX_HPM_PFS_ENTRY_NUM 15 // Number of entries in PFS structure +#define HPM_PFS_ENTRY_SIZE 2 // Entry size of PFS structure in DWORD + +#pragma pack(1) + +#ifndef MMIO_BARS_ENUM +#define MMIO_BARS_ENUM +typedef enum { + TYPE_SCF_BAR = 0, + TYPE_PCU_BAR, + TYPE_MEM_BAR0, + TYPE_MEM_BAR1, + TYPE_MEM_BAR2, + TYPE_MEM_BAR3, + TYPE_MEM_BAR4, + TYPE_MEM_BAR5, + TYPE_MEM_BAR6, + TYPE_MEM_BAR7, + TYPE_SBREG_BAR, + TYPE_MAX_MMIO_BAR +} MMIO_BARS; +#endif + +typedef enum { + ReservedMemSs, + Ddr4MemSs = 1, + Ddr5MemSs = 2, + LpDdr4MemSs = 3, + LpDdr5MemSs = 4, + Hbm2MemSs = 5, + MrcMstMax, + MrcMstDelim = MAX_INT32 +} MRC_MST; + +typedef enum BootMode { + NormalBoot = 0, // Normal path through RC with full init, mem detection, init, training, etc. + // Some of these MRC specific init routines can be skipped based on MRC input params + // in addition to the sub-boot type (WarmBoot, WarmBootFast, etc). + S3Resume = 1 // S3 flow through RC. Should do the bare minimum required for S3 + // init and be optimized for speed. +} BootMode; + +// +// This is used to determine what type of die is connected to a UPI link +// +typedef enum { + UpiConnectionTypeCpu, + UpiConnectionTypePcieGen4, + UpiConnectionTypeFpga, + UpiConnectionTypeMax +} UPI_CONNECTION_TYPE; + +// +// VSEC info for HPM +// The HPM_INFO struct contains info collected from the VSEC structure for the HPM. +// VSEC Structure is defined as below: +// +// ------------------------VSEC Structure------------------------ +// | Next Cap Offset(12b) | Cap Version(4b) | PCIe Cap ID(16b) | +// -------------------------------------------------------------- +// | VSEC_LEN(12b) | VSEC_REV(4b) | VSEC_ID(16b) | +// -------------------------------------------------------------- +// | EntrySize(8b) | NumEntries(8b) | Rsvd(16b) | +// -------------------------------------------------------------- +// | Address(29b) | tBIR(3b) | +// -------------------------------------------------------------- +// +// +typedef struct { + UINT8 NumEntries; // The number of PM feature interface instances in this VSEC space + UINT8 EntrySize; // The entry size for each PM interface instance in 32-bit DWORDs + UINT32 Address; // The offset from the BAR register which is used for HPM to point to the base of the discovery entry. i.e. the PFS (PM Feature Structure) + UINT8 tBIR; // Which one of he function's BAR is used for the PFS offset +} HPM_INFO; + +// +//-------------------------------- - PFS Entry-------------------------------- +//| EntrySize(16b) | NumEntries(8b) | VSEC_SubID(8b) | +//---------------------------------------------------------------------------- +//| RSVD(14b) | Attr(2b) | CapOffset(16b) | +//---------------------------------------------------------------------------- +// +typedef struct { + UINT32 TpmiId : 8; + UINT32 NumEntries : 8; + UINT32 EntrySize : 16; + UINT32 CapOffset : 16; + UINT32 Attribute : 2; + UINT32 EntryBitMap : 8; + UINT32 Rsvd : 6; +} PFS_ENTRY; + +// +// HPM (Hierarchical Power Management) VSEC resource allocation info +// +typedef struct { + BOOLEAN HpmEnabled; // HPM enabled or not in BIOS knob + BOOLEAN HpmInfraReady; // All the HPM infrastructure data is buffered + UINT32 OobMsmHpmBarBase; // The base of OOBMSM BAR1 for HPM PFS and LUT tables + UINT32 OobMsmHpmBarLimit; // The limit of OOBMSM BAR1 from where the required size will be allocated + UINT32 OobMsmHpmBarMmcfgAddress; // The OOBMSM BAR1 MMCFG address + UINT32 OobMsmHpmBarRequiredSize; // The required size of OOBMSM BAR1 + + HPM_INFO HpmVsecInfo; // For now, single VSEC is assumed + PFS_ENTRY Pfs[MAX_HPM_PFS_ENTRY_NUM]; // The buffered PFS structure + +} HPM_VSEC_RESOURCE; + +// +// Stack id swap information, which includes stack swap flag and the new stack id swap array. +// +typedef struct { + BOOLEAN StackSwapFlag; + UINT8 StackIdSwapArray[MAX_IIO_STACK]; +} STACKID_SWAP_INFO; + +typedef struct { + UINT64 Cxl1p1RcrbBase; + BOOLEAN Cxl1p1RcrbValid; +} CXL_1P1_RCRB; + +typedef struct { + UINT32 StackPresentBitmap[MAX_SOCKET]; ///< bitmap of present stacks per socket + UINT8 StackBus[MAX_SOCKET][MAX_LOGIC_IIO_STACK];///< Bus of each stack + UINT32 StackMmiol[MAX_SOCKET][MAX_IIO_STACK]; ///< mmiol of each IIO stack, if it works as CXL, the mmiol base is RCRBBAR + UINT8 SocketFirstBus[MAX_SOCKET]; + UINT8 Socket10nmUboxBus0[MAX_SOCKET]; //10nm CPU use only + UINT8 TotIoDie[MAX_SOCKET]; //GNR & SRF CPU use only + UINT8 TotCmpDie[MAX_SOCKET]; //GNR & SRF CPU use only + UINT8 SocketLastBus[MAX_SOCKET]; + UINT8 segmentSocket[MAX_SOCKET]; + UINT8 KtiPortCnt; + UINT32 socketPresentBitMap; + UINT32 SecondaryNodeBitMap; + UINT32 FpgaPresentBitMap; + UINT32 mmCfgBase; + UINT64 SocketMmCfgBase[MAX_SOCKET]; + UINT8 DdrMaxCh; + UINT8 DdrMaxImc; ///< Logical number of IMC count, ignoring logical holes + UINT8 DdrPhysicalMaxImc; ///< Physical number of IMC count from Capid + UINT8 DdrNumChPerMc; + UINT8 DdrNumPseudoChPerCh; + UINT8 imcEnabled[MAX_SOCKET][MAX_IMC]; + UINT8 mcId[MAX_SOCKET][MAX_CH]; + MRC_MST MemSsType[MAX_SOCKET]; ///< MemSsType global identifier for DDR vs. HBM + UINT32 MmioBar[MAX_SOCKET][TYPE_MAX_MMIO_BAR]; + UINT8 HbmMaxCh; + UINT8 HbmMaxIoInst; + UINT8 HbmNumChPerMc; + UINT8 HbmNumChPerIo; + UINT32 LastCsrAddress[2]; + UINT32 LastCsrMmioAddr; + UINT8 CsrCachingEnable; + UINT32 LastCsrMcAddress[2]; + UINT32 LastCsrMcMmioPhyAddr; + UINT8 CsrPciBarCachingEnable; + UINT32 LastCsrPciBarAddr[2]; + UINT64 LastCsrPciBarPhyAddr; + UINT32 LastSBPortId[MAX_SOCKET]; + UPI_CONNECTION_TYPE UpiConnectionType[MAX_SOCKET]; + BOOLEAN PostedCsrAccessAllowed; // SW is allowed to use posted CSR writes method when TRUE + BOOLEAN PostedWritesEnabled; // All CSR writes use posted method when TRUE, non-posted when FALSE + BOOLEAN DataPopulated; // CPU_CSR_ACCESS_VAR is unavailable when FALSE + HPM_VSEC_RESOURCE SocketHpmVsecRes[MAX_SOCKET]; // HPM VSEC info for all sockets + BOOLEAN HbmSku; + UINT8 HcxType[MAX_SOCKET]; + STACKID_SWAP_INFO StackIdSwapInfo[MAX_SOCKET]; //StackID sync after do StackId swap,including Stack swap table and whether do stack swap + CXL_1P1_RCRB Cxl1p1Rcrb[MAX_SOCKET][MAX_IIO_STACK]; // CXL 1.1 RCRB, one per PI5 stack + UINT32 DmiRcrb[MAX_SOCKET]; // DMI RCRB region, one per socket + UINT8 FabricType; //Compute die 10x6, 10x5, and 6x5 type is stored + UINT8 ChopType; //Compute Die Chop Type + UINT8 MdfInstCount; +} CPU_CSR_ACCESS_VAR; + +typedef struct { + UINT32 MeRequestedSizeNv; + UINT32 MeRequestedAlignmentNv; + UINT8 SbspSocketIdNv; +} SYS_INFO_VAR_NVRAM; + +typedef struct _CPUID_REGISTER_INFO { + UINT32 Eax; + UINT32 Ebx; + UINT32 Ecx; + UINT32 Edx; +} CPUID_REGISTER_INFO; + +typedef struct _PROCESSOR_COMMON_INFO { + UINT32 capid0; + UINT32 capid1; + UINT32 capid2; + UINT32 capid3; + UINT32 capid4; + UINT32 capid5; + UINT32 capid6lo; + UINT32 capid6hi; + CPUID_REGISTER_INFO ExtCpuid7; + CPUID_REGISTER_INFO ExtCpuid1B; +} PROCESSOR_COMMON_INFO; + +typedef struct { + UINT32 MeRequestedSize; + UINT32 MeRequestedAlignment; + UINT32 CheckPoint; + UINT8 ResetRequired; + UINT8 Emulation; + BootMode SysBootMode; + CPU_CSR_ACCESS_VAR CpuCsrAccessVarHost; // Common resource for CsrAccessRoutines + UINT64 CpuFreq; + UINT8 SocketId; + SYS_INFO_VAR_NVRAM SysInfoVarNvram; + BOOLEAN UsraTraceControl; + UINT16 UsraTraceConfiguration; // Bit 7 6 5 4 3:0 + // Write, Modify, GetAddr, Long/Short, Trace 0x5 as signature + // Bit 15 14:11 10 9 8 + // DumpCpuCsrAccessVar, TBD, CSR, PCIE, Read + BOOLEAN CpuCsrAccessVarInfoDumped; + PROCESSOR_COMMON_INFO ProcessorCommonInfo[MAX_SOCKET]; + EFI_PHYSICAL_ADDRESS SocAddrMapData; + UINTN UsraPpiPtr; +} SYSTEM_INFO_VAR; + + +#pragma pack () + +#endif //#ifndef _SYSTEM_INFO_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/CxlNodeHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/CxlNodeHob.h new file mode 100644 index 0000000000..42b5cc20d5 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/CxlNodeHob.h @@ -0,0 +1,94 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _CXL_NODE_HOB_ +#define _CXL_NODE_HOB_ + +#define CXL_NODE_HOB_GUID { 0xdd8ae009, 0xda5a, 0x44a3, { 0xbe, 0x18, 0xda, 0x0c, 0x16, 0xc5, 0xaf, 0x5c } } + +#ifndef MAX_CXL_HDM_RANGES +#define MAX_CXL_HDM_RANGES 0x2 // Maximum number of CXL HDM ranges per CXL end device. +#endif + +#ifndef MAX_CXL_PER_SOCKET +#define MAX_CXL_PER_SOCKET 8 +#endif + +#define CXL_NODE_ATTR_MEM BIT0 +#define CXL_NODE_ATTR_PERSISTENT BIT1 +#define CXL_NODE_ATTR_MEM_HW_INIT BIT2 +#define CXL_NODE_ATTR_ACCELERATOR BIT3 + +typedef UINT32 CXL_NODE_ATTR; + +#pragma pack(1) + +// +// CDAT DSEMTS EFI Memory Type and Attribute +// +typedef enum { + CxlEfiConventionalMemory = 0x0, + CxlEfiConventionalMemorySp = 0x1, + CxlEfiReservedMemoryType = 0x2, + MaxCxlEfiMemType +} CXL_EFI_MEM_TYPE; + +typedef struct { + UINT32 RdLatency; + UINT32 WrLatency; + UINT32 RdBandwidth; + UINT32 WrBandwidth; +} CXL_PERF_DATA; + +typedef struct { + UINT64 SerialNumber; + UINT16 VendorId; + CXL_NODE_ATTR Attr; + UINT32 Address; + UINT32 Size; + UINT8 Ways; + UINT8 SocketBitmap; + CXL_EFI_MEM_TYPE EfiMemType; + CXL_PERF_DATA InitiatorPerfData; // Performance data between device egress and initiator. + CXL_PERF_DATA TargetPerfData; // Performance data of entire target memory region. + CXL_PERF_DATA InitiatorTargetPerfData; // performance data between initiator and the device memory. +} CXL_NODE_INFO; + +typedef struct { + UINT8 CxlNodeCount; + // + // CXL node info for UEFI memory map and ACPI tables construction + // + CXL_NODE_INFO CxlNodeInfo[MAX_CXL_PER_SOCKET * MAX_CXL_HDM_RANGES]; +} CXL_NODE_SOCKET; + +#pragma pack() + +#endif //#ifndef _CXL_NODE_HOB_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/EnhancedWarningLogLib.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/EnhancedWarningLogLib.h new file mode 100644 index 0000000000..7c54749304 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/EnhancedWarningLogLib.h @@ -0,0 +1,169 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _ENHANCED_WARNING_LOG_LIB_ +#define _ENHANCED_WARNING_LOG_LIB_ + +#define FSP_RESERVED_LEN 12 + +#pragma pack(1) + +/// +/// Enhanced Warning Log Header +/// +typedef struct { + EFI_GUID EwlGuid; /// GUID that uniquely identifies the EWL revision + UINT32 Size; /// Total size in bytes including the header and buffer + UINT32 FreeOffset; /// Offset of the beginning of the free space from byte 0 + /// of the buffer immediately following this structure + /// Can be used to determine if buffer has sufficient space for next entry + UINT32 Crc; /// 32-bit CRC generated over the whole size minus this crc field + /// Note: UEFI 32-bit CRC implementation (CalculateCrc32) (References [7]) + /// Consumers can ignore CRC check if not needed. + UINT32 Reserved; /// Reserved for future use, must be initialized to 0 +} EWL_HEADER; + +/// +/// List of all entry types supported by this revision of EWL +/// +typedef enum { + EwlType0 = 0, + EwlType1 = 1, + EwlType2 = 2, + EwlType3 = 3, + EwlType4 = 4, + EwlType5 = 5, + EwlType6 = 6, + EwlType7 = 7, + EwlType8 = 8, + EwlType9 = 9, + EwlType10 = 10, + EwlType11 = 11, + EwlType12 = 12, + EwlType13 = 13, + EwlType14 = 14, + EwlType15 = 15, + EwlType16 = 16, + EwlType17 = 17, + EwlType18 = 18, + EwlType19 = 19, + EwlType20 = 20, + EwlType21 = 21, + EwlType22 = 22, + EwlType23 = 23, + EwlType24 = 24, + EwlType25 = 25, + EwlType26 = 26, + EwlType27 = 27, + EwlType28 = 28, + EwlType29 = 29, + EwlType30 = 30, + EwlType31 = 31, + EwlType32 = 32, + EwlTypeMax, + EwlTypeOem = 0x8000, + EwlTypeDelim = MAX_INT32 +} EWL_TYPE; + +/// +/// EWL severities +/// +typedef enum { + EwlSeverityInfo, + EwlSeverityWarning, + EwlSeverityFatal, + EwlSeverityMax, + EwlSeverityDelim = MAX_INT32 +} EWL_SEVERITY; + + +/// +/// Generic entry header for parsing the log +/// +typedef struct { + EWL_TYPE Type; + UINT16 Size; /// Entries will be packed by byte in contiguous space + EWL_SEVERITY Severity; /// Warning, error, informational, this may be extended in the future +} EWL_ENTRY_HEADER; + +/// +/// Legacy content provides context of the warning +/// +typedef struct { + UINT8 MajorCheckpoint; // EWL Spec - Appendix B + UINT8 MinorCheckpoint; + UINT8 MajorWarningCode; // EWL Spec - Appendix A + UINT8 MinorWarningCode; +} EWL_ENTRY_CONTEXT; + +/// +/// Legacy content to specify memory location +/// +typedef struct { + UINT8 Socket; /// 0xFF = n/a + UINT8 Channel; /// 0xFF = n/a + UINT8 PseudoChannel; /// 0xFF = n/a + UINT8 Dimm; /// 0xFF = n/a + UINT8 Rank; /// 0xFF = n/a +} EWL_ENTRY_MEMORY_LOCATION; + +/// +/// Type 3 = Enhanced type for command, control IO errors +/// +typedef struct { + EWL_ENTRY_HEADER Header; + EWL_ENTRY_CONTEXT Context; + EWL_ENTRY_MEMORY_LOCATION MemoryLocation; + UINT8 reserved1[FSP_RESERVED_LEN]; // MRC_LT Level; MRC_GT Group; GSM_CSN Signal; + UINT8 EyeSize; // 0xFF = n/a +} EWL_ENTRY_TYPE3; + +#pragma pack() + +/// +/// Enhanced Warning Log Spec defined data log structure +/// +typedef struct { + EWL_HEADER Header; /// The size will vary by implementation and should not be assumed + UINT8 Buffer[4 * 1024]; /// The spec requirement is that the buffer follow the header +} EWL_PUBLIC_DATA; + +/// +/// EWL private data structure. This is going to be implementation dependent +/// When we separate OEM hooks via a PPI, we can remove this +/// +typedef struct { + UINT32 bufSizeOverflow; // Number of bytes that could not be added to buffer + UINT32 numEntries; // Number of entries currently logged + EWL_PUBLIC_DATA status; // Spec defined EWL +} EWL_PRIVATE_DATA; + + +#endif // #ifndef _ENHANCED_WARNING_LOG_LIB_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FirmwareVersionInfoHob.h new file mode 100644 index 0000000000..5d09dd2d18 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FirmwareVersionInfoHob.h @@ -0,0 +1,59 @@ +/** @file + Header file for Firmware Version Information + @copyright + Copyright (c) 2015 - 2021, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent +**/ + +#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ +#define _FIRMWARE_VERSION_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> + +#pragma pack(1) +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} FIRMWARE_VERSION; + +/// +/// Firmware Version Information Structure +/// +typedef struct { + UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name + UINT8 VersionStringIndex; ///< Offset 1 Index of Version String + FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version +} FIRMWARE_VERSION_INFO; + +#ifndef __SMBIOS_STANDARD_H__ +/// +/// The Smbios structure header. +/// +typedef struct { + UINT8 Type; + UINT8 Length; + UINT16 Handle; +} SMBIOS_STRUCTURE; +#endif + +/// +/// Firmware Version Information HOB Structure +/// +typedef struct { + EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB + SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB + UINT8 Count; ///< Offset 28 Number of FVI elements included. +/// +/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer +/// +} FIRMWARE_VERSION_INFO_HOB; +#pragma pack() + +#endif // _FIRMWARE_VERSION_INFO_HOB_H_
\ No newline at end of file diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspAcpiHobs.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspAcpiHobs.h new file mode 100644 index 0000000000..7338538e13 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspAcpiHobs.h @@ -0,0 +1,34 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _FSP_ACPI_HOBS_H_ +#define _FSP_ACPI_HOBS_H_ + +#endif //#ifndef _FSP_ACPI_HOBS_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspEas.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspEas.h new file mode 100644 index 0000000000..f99c3bc36b --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspEas.h @@ -0,0 +1,17 @@ +/** @file + Intel FSP definition from Intel Firmware Support Package External + Architecture Specification v2.2. + @copyright + Copyright (c) 2015 - 2021, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent +**/ + +#ifndef _FSP_EAS_H_ +#define _FSP_EAS_H_ + +#include <Uefi.h> +#include <Guid/GuidHobFspEas.h> +#include <Guid/FspHeaderFile.h> +#include <FspEas/FspApi.h> + +#endif // _FSP_EAS_H_
\ No newline at end of file diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspErrorInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspErrorInfoHob.h new file mode 100644 index 0000000000..ecc2d6fdf7 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspErrorInfoHob.h @@ -0,0 +1,84 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _FSP_ERROR_INFO_HOB_H_ +#define _FSP_ERROR_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> +#include <Pi/PiStatusCode.h> + +#define FSP_ERROR_INFO_HOB_GUID { 0x611e6a88, 0xadb7, 0x4301, { 0x93, 0xff, 0xe4, 0x73, 0x04, 0xb4, 0x3d, 0xa6 }} + +#pragma pack(1) + +typedef struct { + /// + /// GUID HOB header. + /// + EFI_HOB_GUID_TYPE GuidHob; + + /// + /// ReportStatusCode () type identifier. + /// + EFI_STATUS_CODE_TYPE Type; + + /// + /// ReportStatusCode () value. + /// + EFI_STATUS_CODE_VALUE Value; + + /// + /// ReportStatusCode () Instance number. + /// + UINT32 Instance; + + /// + /// Optional GUID which may be used to identify + /// which internal component of the FSP was + /// executing at the time of the error. + /// + EFI_GUID CallerId; + + /// + /// GUID identifying the nature of the fatal error. + /// + EFI_GUID ErrorType; + + /// + /// EFI_STATUS code describing the error encountered. + /// + UINT32 Status; +} FSP_ERROR_INFO_HOB; + +#pragma pack() + +#endif //#ifndef _FSP_ERROR_INFO_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspUpd.h new file mode 100644 index 0000000000..d90f785578 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspUpd.h @@ -0,0 +1,50 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F445055525053 /* 'SPRUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F445055525053 /* 'SPRUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F445055525053 /* 'SPRUPD_S' */ + +#define FSPI_UPD_SIGNATURE 0x495F445055524E47 /* 'GNRUPD_I' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspiUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspiUpd.h new file mode 100644 index 0000000000..93ca55839f --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspiUpd.h @@ -0,0 +1,69 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPI_UPD_H__ +#define __FSPI_UPD_H__ + +#include <FspUpd.h> + +#define FSP_RAS_ACPI_HOB_GUID { 0x826785ee, 0xa8e0, 0x4d8f, { 0x82, 0x6f, 0x54, 0x29, 0x2c, 0xe7, 0x6f, 0xe6 } }; + +#pragma pack(1) + +typedef struct { + +/** N/A +**/ + UINT8 ReservedSiliconInitUpd[16]; + +} FSPI_CONFIG; + + +typedef struct { + +/** N/A +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** N/A +**/ + FSPI_CONFIG FspiConfig; + +/** N/A +**/ + UINT16 UpdTerminator; + +} FSPI_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspmUpd.h new file mode 100644 index 0000000000..c0f09df54d --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspmUpd.h @@ -0,0 +1,1323 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Customer Revision + The Customer can set this revision string for their own purpose. +**/ + UINT8 CustomerRevision[32]; + +/** Offset 0x0060 - Bus Ratio + Indicates the ratio of Bus/MMIOL/IO resource to be allocated for each CPU's IIO +**/ + UINT8 BusRatio[8]; + +/** Offset 0x0068 - D2K Credit Config + Set the D2K Credit Config - 1: Min, <b>2: Med(Default)</b>, 3: Max. + 1:Min, 2:Med, 3:Max +**/ + UINT8 D2KCreditConfig; + +/** Offset 0x0069 - Snoop Throttle Config + Set the Snoop Throttle Config - <b>0: DIS(Default)</b>, 1: Min, 2: Med, 3: Max. + 0:DIS, 1:Min, 2:Med, 3:Max +**/ + UINT8 SnoopThrottleConfig; + +/** Offset 0x006A - Legacy VGA Soc + Socket that claims the legacy VGA range +**/ + UINT8 LegacyVgaSoc; + +/** Offset 0x006B - Legacy VGA Stack + Stack that claims the legacy VGA range +**/ + UINT8 LegacyVgaStack; + +/** Offset 0x006C - Pcie P2P Performance Mode + Determine if to enable PCIe P2P Performance Mode - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 P2pRelaxedOrdering; + +/** Offset 0x006D - UPI Debug Print Level + UPI Debug Print Level Bitmask - 0: Disable, 1: Fatal, 2: Warning, 4: Summary, 8: + Detail, <b>0x0F: All(Default)</b>. + 1:Fatal, 2:Warning, 4:Summary, 8:Detail, 0x0F:All +**/ + UINT8 DebugPrintLevel; + +/** Offset 0x006E - NumaEn + NumaEn - <b>1: Enable Numa(Default)</b>, 0: Disable Numa. + 0:Disable, 1:Enable +**/ + UINT8 NumaEn; + +/** Offset 0x006F - SNC + Enable or Disable SNC - 0: Disable, 2: Snc2, 4: Snc4, <b>0x0F: Auto(Default)</b>. + 0: Disable, 2: Snc2, 4: Snc4, 0x0F: Auto +**/ + UINT8 SncEn; + +/** Offset 0x0070 - UMA Clustering + Set UMA Clusters - 0: Disable, 2: Two Clusters, <b>4: Four Clusters(Default)</b>. + 0:Disable, 2:Two Clusters, 4:Four Clusters +**/ + UINT8 UmaClustering; + +/** Offset 0x0071 - IODC Mode + IODC Mode - 0: Disable, <b>1: Auto(Default)</b>, 2: Push, 3: AllocFlow, 4: NonAlloc, + 5: WCILF. + 0:Disable, 1:Auto, 2:Push, 3:AllocFlow, 4:NonAlloc, 5:WCILF +**/ + UINT8 IoDcMode; + +/** Offset 0x0072 - Degrade Precedence + Setup Degrade Precedence - <b>0: Topology(Default)</b>, 1: Feature. + 0:Topology, 1:Feature +**/ + UINT8 DegradePrecedence; + +/** Offset 0x0073 - Degrade 4 Socket Preference + Setup Degrade 4 Socket Preference - <b>0: Fully Connect(Default)</b>, 1: Dual Link Ring. + 0:Fully Connect, 1:Dual Link Ring +**/ + UINT8 Degrade4SPreference; + +/** Offset 0x0074 - Directory Mode + Enable or Disable Directory Mode - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 DirectoryModeEn; + +/** Offset 0x0075 - XPT Prefetch Enable + Enable or Disable XPT Prefetch - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 XptPrefetchEn; + +/** Offset 0x0076 - KTI Prefetch Enable + Enable or Disable KTI Prefetch - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 KtiPrefetchEn; + +/** Offset 0x0077 - XPT Remote Prefetch Enable + Enable or Disable XPT Remote Prefetch Enable - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 XptRemotePrefetchEn; + +/** Offset 0x0078 - KTI FPGA + Enable or Disable KTI FPGA +**/ + UINT8 KtiFpgaEnable[8]; + +/** Offset 0x0080 - DDRT QoS Mode + DDRT QoS - <b>0: Mode 0(Default)</b>, 1: Mode 1, 2: Mode 2. + 0:Mode 0, 1:Mode 1, 2:Mode 2 +**/ + UINT8 DdrtQosMode; + +/** Offset 0x0081 - KTI Link Speed Mode + Choose KTI Link Speed Mode - 0: Slow, <b>1: Full(Default)</b>. + 0:Slow, 1:Full +**/ + UINT8 KtiLinkSpeedMode; + +/** Offset 0x0082 - KTI Link Speed + Setup KTI Link Speed - 0: 128GT, 1: 144GT, 2: 160GT, 3: 200GT, <b>0x7F: Max KTI + Link Speed (Default)</b>, 0x8F: Frequency Per Link. + 0:128GT, 1:144GT, 2:160GT, 3:200GT, 0x7F:Max KTI Link Speed, 0x8F:Frequency Per Link +**/ + UINT8 KtiLinkSpeed; + +/** Offset 0x0083 - KTI Link L0p + Enable or Disable KTI Link L0p - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2: Auto +**/ + UINT8 KtiLinkL0pEn; + +/** Offset 0x0084 - KTI Link L1 + Enable or Disable KTI Link L1 - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2: Auto +**/ + UINT8 KtiLinkL1En; + +/** Offset 0x0085 - Kti Link Speed Per Port + Setup KTI Link Speed to be allocated for each port - 0: 128GT, 1: 144GT, 2: 160GT, + 3: 200GT, <b>0x7f: Max KTI Link Speed(Default)</b>. + 0:128GT, 1:144GT, 2:160GT, 3:200GT, 0x7f:Max KTI Link Speed +**/ + UINT8 KtiLinkSpeedPerPort[48]; + +/** Offset 0x00B5 - DfxL0p Enable + Indicates the DfxL0p Enable to be allocated for each port - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 DfxL0pEnable[48]; + +/** Offset 0x00E5 - DfxL1 Enable + Indicates the DfxL1 Enable to be allocated for each port - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 DfxL1Enable[48]; + +/** Offset 0x0115 - KTI Failover + Enable or Disable KTI Failover - 0: Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2: Auto +**/ + UINT8 KtiFailoverEn; + +/** Offset 0x0116 - KTI LB Enable + Enable or Disable KTI LB - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 KtiLbEn; + +/** Offset 0x0117 - KTI CRC Mode + Select KTI CRC Mode - <b>0: 16bit(Default)</b>, 1: 32bit, 2: Auto. + 0:16bit, 1:32bit, 2:Auto +**/ + UINT8 KtiCrcMode; + +/** Offset 0x0118 - KTI CPU Socket Hotplug + Enable or Disable KTI CPU Socket Hotplug - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 KtiCpuSktHotPlugEn; + +/** Offset 0x0119 - KTI CPU Socket HotPlug Topology + Select KTI CPU Socket HotPlug Topology - <b>0: 4Socket(Default)</b>, 1: 8Socket. + 0:4Socket, 1:8Socket +**/ + UINT8 KtiCpuSktHotPlugTopology; + +/** Offset 0x011A - KTI SKU Mismatch Check + Enable or Disable KTI SKU Mismatch Check - 0: Disable, <b>1 :Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 KtiSkuMismatchCheck; + +/** Offset 0x011B - TOR Threshold - Loctorem threshold Normal + Select TOR Threshold - Loctorem threshold Normal - 0: Disable, <b>1: Auto(Default)</b>, + 2: Low, 3: Medium, 4: High. + 0:Disable, 1:Auto, 2:Low, 3:Medium, 4:High +**/ + UINT8 TorThresLoctoremNorm; + +/** Offset 0x011C - TOR threshold - Loctorem threshold empty + Select TOR threshold - Loctorem threshold empty - 0: Disable, <b>1: Auto(Default)</b>, + 2: Low, 3: Medium, 4:High. + 0:Disable, 1:Auto, 2:Low, 3:Medium, 4:High +**/ + UINT8 TorThresLoctoremEmpty; + +/** Offset 0x011D - TSC Sync in Sockets + Enable or Disable TSC Sync in Sockets - 0: Disable, <b>1: Enable(Default)</b>, 2: Auto. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 TscSyncEn; + +/** Offset 0x011E - HA A to S directory optimization + Enable or Disable HA A to S directory optimization - 0: Disable, 1: Enable, <b>2: + Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 StaleAtoSOptEn; + +/** Offset 0x011F - LLC Deadline Allocation + Enable or Disable LLC Deadline Allocation - 0: Disable, <b>1: Enable(Default)</b>, 2: Auto. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 LLCDeadLineAlloc; + +/** Offset 0x0120 - MBA BW Calibration Profiles + Choice of MBA BW throttling curve - 0: Linear BW shaping, 1: Biased BW shaping, + 2: Legacy BW shaping, <b>3: Auto(Default)</b>. + 0:Linear BW shaping, 1:Biased BW shaping, 2:Legacy BW shaping, 3:Auto +**/ + UINT8 MbeBWCalChoice; + +/** Offset 0x0121 - Split Lock + Enable or Disable Split Lock - <b>0: Disable(Default)</b>, 1: Enable, 2: Auto. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 SplitLock; + +/** Offset 0x0122 - Affinitize M2Iosf to Upi for 2-Socket + Affinitize M2IOSF traffic to proper UPI links to improve 2-Socket P2P perf - 0: + Disable, 1: Enable, <b>2: Auto(Default)</b>. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 M2iosfToUpiAffinity; + +/** Offset 0x0123 - MMCFG Base Address + Setup MMCFG Base Address - 0: 1G, 1: 1.5G, 2: 1.75G, 3: 2G, 4: 2.25G, 5: 3G, <b>6: + Auto(Default)</b>. + 0:1G, 1:1.5G, 2:1.75G, 3:2G, 4:2.25G, 5:3G, 6:Auto +**/ + UINT8 mmCfgBase; + +/** Offset 0x0124 - MMCFG Size + Select MMCFG Size - 0: 64M, 1: 128M, 2: 256M, 3: 512M, 4: 1G, 5: 2G, <b>6: Auto(Default)</b>. + 0:64M, 1:128M, 2:256M, 3:512M, 4:1G, 5:2G, 6:Auto +**/ + UINT8 mmCfgSize; + +/** Offset 0x0125 +**/ + UINT8 UnusedUpdSpace0[3]; + +/** Offset 0x0128 - MMIO High Base Address + MMIO High Base Address, a hex number for Bit[51:32] +**/ + UINT32 mmiohBase; + +/** Offset 0x012C - CPU Physical Address Limit + CPU Physical Address Limit - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 CpuPaLimit; + +/** Offset 0x012D +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x012E - MMIO High Size + MMIO High Size, Number of 1GB contiguous regions to be assigned for MMIOH space + per CPU. Range 1-1024 +**/ + UINT16 mmiohSize; + +/** Offset 0x0130 - isocEn + Enable or Disable isocEn - <b>0: Disable(Default)</b>, 1: Enable, 2: Auto. + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 isocEn; + +/** Offset 0x0131 - DCA + Enable or Disable DCA - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 dcaEn; + +/** Offset 0x0132 +**/ + UINT8 UnusedUpdSpace2[2]; + +/** Offset 0x0134 - BoardTypeBitmask + BoardTypeBitmask +**/ + UINT32 BoardTypeBitmask; + +/** Offset 0x0138 - AllLanesPtr + Pointer to array of ALL_LANES_EPARAM_LINK_INFO +**/ + UINT32 AllLanesPtr; + +/** Offset 0x013C - PerLanePtr + Pointer to array of PER_LANE_EPARAM_LINK_INFO +**/ + UINT32 PerLanePtr; + +/** Offset 0x0140 - AllLanesSizeOfTable + Number of elements in AllLanesPtr array. +**/ + UINT32 AllLanesSizeOfTable; + +/** Offset 0x0144 - PerLaneSizeOfTable + Number of elements in PerLanePtr array. +**/ + UINT32 PerLaneSizeOfTable; + +/** Offset 0x0148 - WaitTimeForPSBP + Enable or Disable WaitTimeForPSBP +**/ + UINT32 WaitTimeForPSBP; + +/** Offset 0x014C - WaSerializationEn + Enable or Disable WaSerializationEn - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 WaSerializationEn; + +/** Offset 0x014D - KtiInEnableMktme + Enable or Disable KtiInEnableMktme - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 KtiInEnableMktme; + +/** Offset 0x014E - HIOP STACK DISABLE + Enables/Disables given HIOP STACK. Default is AUTO no stack is disabled. 1 - The + stacks indicated by the bit locations are disabled. 0 - The stacks indicated by + the bit locations are not modified. The stack order is abstracted each bit 0 = + stack 0 ... bit n = stack n. The bit setting for each stack can be overriden by + BIOS based on part-knob compatibility. The array size must be MAX_SOCKET x UINT32. +**/ + UINT8 StackDisableBitMap[32]; + +/** Offset 0x016E - CFRS3mProvision + Enable or Disable Provision S3M CFR - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 CFRS3mProvision; + +/** Offset 0x016F - CFRS3mManualCommit + Enable or Disable Manual Commit S3M FW CFR - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 CFRS3mManualCommit; + +/** Offset 0x0170 - CFRPucodeProvision + Enable or Disable Provision PUcode CFR - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 CFRPucodeProvision; + +/** Offset 0x0171 - CFRPucodeManualCommit + Enable or Disable Manual Commit PUcode CFR - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 CFRPucodeManualCommit; + +/** Offset 0x0172 +**/ + UINT8 UnusedUpdSpace3[2]; + +/** Offset 0x0174 - CFRImagePtr + Pointer to array of CFR Image +**/ + UINT32 CFRImagePtr; + +/** Offset 0x0178 - Processor VmxEnable Function + Enable(Default) or Disable Processor VmxEnable Function - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 VmxEnable; + +/** Offset 0x0179 - Processor X2apic Function + Enable(Default) or Disable Processor X2apic Function - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 X2apic; + +/** Offset 0x017A - Processor HyperThreading Function + Enable(Default) or Disable Processor HyperThreading Function - 1: Disable, <b>0: + Enable(Default)</b>. + 1:Disable, 0:Enable +**/ + UINT8 ProcessorHyperThreadingDisable; + +/** Offset 0x017B - Processor Dynamic Intel Speed Select (ISS) Function + Enable or Disable(Default) Processor Dynamic Intel Speed Select (ISS) Function - + <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 ProcessorDynamicIssEnable; + +/** Offset 0x017C - Enables Intel(R) TXT + Enable or Disable(Default) Enables Intel(R) TXT - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 ProcessorLtsxEnable; + +/** Offset 0x017D - DDR frequency limit + Select DDR frequency limit, <b>0x00: Auto(Default)</b>, 0x13:DDR_3200, 0x16:DDR_3600, + 0x19:DDR_4000, 0x1C:DDR_4400, 0x1D:DDR_4800, 0x1E:DDR_5200, 0x1F:DDR_5600 +**/ + UINT8 DdrFreqLimit; + +/** Offset 0x017E - Memory Serial Debug Message Level + Select Memory Serial Debug Message Level - 0: Disable, 1: Minimum, 2: Normal, <b>3: + Maximum(Default)</b>, 4: Auto. + 0:Disable, 1:Minimum, 2:Normal, 3:Maximum, 4:Auto +**/ + UINT8 serialDebugMsgLvl; + +/** Offset 0x017F - IIO ConfigIOU0 + ConfigIOU[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU0[8]; + +/** Offset 0x0187 - IIO ConfigIOU1 + ConfigIOU[MAX_SOCKET][1]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU1[8]; + +/** Offset 0x018F - IIO ConfigIOU2 + ConfigIOU[MAX_SOCKET][2]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU2[8]; + +/** Offset 0x0197 - IIO ConfigIOU3 + ConfigIOU[MAX_SOCKET][3]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU3[8]; + +/** Offset 0x019F - IIO ConfigIOU4 + ConfigIOU[MAX_SOCKET][4]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU4[8]; + +/** Offset 0x01A7 - IIO ConfigIOU5 + ConfigIOU[MAX_SOCKET][5]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU5[8]; + +/** Offset 0x01AF - IIO ConfigIOU6 + ConfigIOU[MAX_SOCKET][6]: MAX_SOCKET=8, 0x00:x4x4x4x4, 0x01:x4x4xxx8, 0x02:xxx8x4x4, + 0x03:xxx8xxx8, 0x04:xxxxxx16, <b>0xFF:AUTO(Default)</b> +**/ + UINT8 IioConfigIOU6[8]; + +/** Offset 0x01B7 +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x01B8 - IIO PCIE Config Table Ptr + Pointer to array of UPD_IIO_PCIE_PORT_CONFIG +**/ + UINT32 IioPcieConfigTablePtr; + +/** Offset 0x01BC - IIO PCIE Config Table Number + Number of elements in IioPcieConfigTablePtr array, socket number as unit. +**/ + UINT32 IioPcieConfigTableNumber; + +/** Offset 0x01C0 - IIO DeEmphasis Array Ptr + Pointer to array of DeEmphasis +**/ + UINT32 DeEmphasisPtr; + +/** Offset 0x01C4 - IIO DeEmphasis Array Number + Number of elements in DeEmphasis array. +**/ + UINT32 DeEmphasisNumber; + +/** Offset 0x01C8 - IIO PCIe Common Clock Array Ptr + Pointer to array of PCIe Common Clock +**/ + UINT32 PcieCommonClockPtr; + +/** Offset 0x01CC - IIO PCIe Common Clock Array Number + Number of elements in PCIe Common Clock array. +**/ + UINT32 PcieCommonClockNumber; + +/** Offset 0x01D0 - VT-d Support + Enable or Disable VT-d Support - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 VtdSupport; + +/** Offset 0x01D1 - PCIe ACSCTL + Enable/Disable overwrite of PCI Access Control Services Control register in PCI + root ports - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 VtdPciAcsCtlWaEn; + +/** Offset 0x01D2 +**/ + UINT8 UnusedUpdSpace5[2]; + +/** Offset 0x01D4 - IIO PCIe Port Hide Array Ptr + Pointer to array of Hide or visible for IIO Pcie Port. +**/ + UINT32 PEXPHIDEPtr; + +/** Offset 0x01D8 - IIO PCIe Port Hide Array Number + Number of elements in IIO PCIe Port Hide Array. +**/ + UINT32 PEXPHIDENumber; + +/** Offset 0x01DC - PcieHotPlugEnable + Enable or disable Pcie hot plug enable feature - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 PcieHotPlugEnable; + +/** Offset 0x01DD +**/ + UINT8 UnusedUpdSpace6; + +/** Offset 0x01DE - DelayAfterPCIeLinkTraining + Custom delay after PCI-E link training on IIO ports +**/ + UINT16 DelayAfterPCIeLinkTraining; + +/** Offset 0x01E0 - IIO PCI bus resource Ptr + Pointer to array of socket PCI bus resource. +**/ + UINT32 PciBusResConfigPtr; + +/** Offset 0x01E4 - IIO PCI IO/MMIO base and limits resource Ptr + Pointer to array of socket PCI IO/MMIO resource. +**/ + UINT32 PciBaseLimitsResConfigPtr; + +/** Offset 0x01E8 - PCH PCIE PLL Ssc + Pointer to array of socket PCI IO/MMIO resource. +**/ + UINT8 PchPciePllSsc; + +/** Offset 0x01E9 - MeUmaEnable + Enable or disable ME UMA feature - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 MeUmaEnable; + +/** Offset 0x01EA - SerialIoUartDebugEnable + Enable or Disable SerialIo Uart debug library in FSP - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 SerialIoUartDebugEnable; + +/** Offset 0x01EB +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x01EC - ISA Serial Base selection + Select ISA Serial Base address could be initialized by boot loader - 0x2F8: 0x2F8, + <b>0x3F8: 0x3F8(Default)</b>. + 0x2F8:0x2F8, 0x3F8:0x3F8 +**/ + UINT16 SerialIoUartDebugIoBase; + +/** Offset 0x01EE - MemRefreshWaterMark + Enable or Disable MemRefreshWaterMark in FSP - <b>0: Auto(Default)</b>, 1: Enable, + 2: Disable. + 0:Auto, 1:Enable, 2:Disable +**/ + UINT8 PanicWm; + +/** Offset 0x01EF - promoteMrcWarnings + Enable or Disable MRC promote warning in FSP - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 promoteMrcWarnings; + +/** Offset 0x01F0 - promoteWarnings + <b>Enable(Default)</b> or Disable Promote warning in FSP - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 promoteWarnings; + +/** Offset 0x01F1 - serialDebugMsgLvlTrainResults + Enable or Disable Promote warning in FSP - <b>0:Disable(Default)</b>, 8:Enable. + 0:Disable, 8:Enable +**/ + UINT8 serialDebugMsgLvlTrainResults; + +/** Offset 0x01F2 - MemTest + <b>Enable(Default)</b> or Disable memory test during normal boot in FSP - 0: Disable, + <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 HwMemTest; + +/** Offset 0x01F3 +**/ + UINT8 UnusedUpdSpace8; + +/** Offset 0x01F4 - MemTest Loops + Number of memory test loops during normal boot, set to 0 to run memtest infinitely + in FSP - <b> 1 (Default)</b>. + minimum = 0, maximum = 65535 +**/ + UINT16 MemTestLoops; + +/** Offset 0x01F6 +**/ + UINT8 UnusedUpdSpace9[2]; + +/** Offset 0x01F8 - Adv MemTest Options + This option is a bit mask[19:0]: All 0 = disabled: bit-0=XMATS8, bit-1=XMATS16, + bit-2=Reserved, bit-3=Reserved, bit-4=WCMATS8, bit-5=WCMCH8, bit-6=Reserved, bit-7=MARCHCM64, + bit-8=Reserved, bit-9=Reserved, bit-10=Reserved, bit-11=TWR, bit-12=DATARET, bit-13=MATS8TC1, + bit-14=MATS8TC2, bit-15=MATS8TC3, bit-16=SK-HYNIX, bit-17=SAMSUNG, bit-18=MICRON-RMW, + bit-19=SCRAM_X2 in FSP. +**/ + UINT32 AdvMemTestOptions; + +/** Offset 0x01FC - SmartTestKey + Number of SmartTest Key +**/ + UINT32 SmartTestKey; + +/** Offset 0x0200 - Adv MemTest Pause + Specify a pause delay between 0 to 256000 in units of usec. This is a time period + where refresh is disabled between write and read sequences in FSP. +**/ + UINT32 AdvMemTestCondPause; + +/** Offset 0x0204 - Adv MemTest tREFI + Specify tREFI (refresh rate) timing between 1850 to 7800 in nsec. +**/ + UINT16 AdvMemTestCondTrefi; + +/** Offset 0x0206 - Adv MemTest tWR + Specify tWR timing between 48 to 96 in units of tCK in FSP. +**/ + UINT8 AdvMemTestCondTwr; + +/** Offset 0x0207 +**/ + UINT8 UnusedUpdSpace10; + +/** Offset 0x0208 - Adv MemTest PMIC VDD Level + Specify PMIC VDD level in units of mV in FSP. +**/ + UINT16 AdvMemTestCondPmicVdd; + +/** Offset 0x020A - Adv MemTest Conditions + Auto = set test conditions based on test type; Manual = specify global test conditions; + Disable = Do not apply test conditions in FSP - 0: Disable, <b>1: Auto(Default)</b>, + 2: Manual. + 0:Disable, 1:Auto, 2:Manual +**/ + UINT8 AdvMemTestCondition; + +/** Offset 0x020B - Adv MemTest Reset Failure Tracking List + Enable/disable Reset of the Row Failure Tracking List after each Adv MemTest option. + Useful for testing performance of multiple options in FSP - <b>0: Disable(Default)</b>, + 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 AdvMemTestResetList; + +/** Offset 0x020C - MemTest On Cold Fast Boot + Enable - Enables memory test during cold fast boot. Disable - Disables this feature. + Auto - Sets it to the MRC default setting; current default is Disable in FSP - + <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnColdFastBoot; + +/** Offset 0x020D - Attempt Fast Boot + Enable - Portions of memory reference code will be skipped when possible to increase + boot speed on warm boots. Disable - Disables this feature. Auto - Sets it to the + MRC default setting - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 AttemptFastBoot; + +/** Offset 0x020E - MemTest On Cold Fast Boot + Enable - Enables memory test during cold fast boot. Disable - Disables this feature. + Auto - Sets it to the MRC default setting - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 AttemptFastBootCold; + +/** Offset 0x020F - Multithreaded Memory Training + Selects the number of processor sockets to train in parallel. - <b>0: All sockets + operate in parallel(Default)</b>. 1: At any time only one socket is executing. + 2: At any time only two socket are executing. 4: At any time only four socket are + executing in FSP. + 0:All Processor Sockets, 1:One Socket at a Time (No Multithreading), 2:Two Sockets + at a Time, 4:Four Sockets at a Time +**/ + UINT8 AllowedSocketsInParallel; + +/** Offset 0x0210 - Auto-Reset on mem Training Error + Enable/Disable Auto-Reset on mem Training Error in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 AutoResetOnMemErr; + +/** Offset 0x0211 - Rank Margin Tool + Enable/Disable the Rank Margin Tool in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 EnableRMT; + +/** Offset 0x0212 - RMT on Fast Cold Boot + Enable/Disable the Rank Margin Tool on a Fast Cold Boot in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 EnableRMTonFCB; + +/** Offset 0x0213 - Execute Jedecinit before RMT + Execute Jedecinit before Rank Margin Tool in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 JedecInitBeforeRMT; + +/** Offset 0x0214 - Backside Margining + Enable/Disable margin test on the register or buffer backside in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 RMTBacksideMargining; + +/** Offset 0x0215 - CmdAll + Step size of CmdAll. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto(Default)</b>, + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTCmdAll; + +/** Offset 0x0216 - RMT Debug Messages + Enable/Disable the RMT debug messages in FSP - <b>2:Disable(Default)</b>, 5:Enable. + 2:Disable, 5:Enable +**/ + UINT8 RMTDebugMessages; + +/** Offset 0x0217 - RMT Display Tables + Enable/Disable displaying results as tables in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTDisplayTables; + +/** Offset 0x0218 - RMT Loop Count + Exponential loop count for single rank test in FSP. +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0219 +**/ + UINT8 UnusedUpdSpace11[3]; + +/** Offset 0x021C - Test Signal Bit Mask For RMT + Test signal bit mask for RMT in FSP. +**/ + UINT32 TestSignalBitMaskRMT; + +/** Offset 0x0220 - RMT Per Bit Margining + Enable/Disable Per Bit Margining in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTPerBitMargining; + +/** Offset 0x0221 - RMT Per CA Lane Margining + Enable/Disable Per CA Lane Margining in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTPerCaLaneMargining; + +/** Offset 0x0222 - RMT Display Plots + Enable/Disable the display of per-bit results as plots in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTPerDisplayPlots; + +/** Offset 0x0223 - RMT RxDqs + Step size of RxDqs. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto,(Default)</b> + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTRxDqs; + +/** Offset 0x0224 - RMT RxVref + Step size of RxVref. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto,(Default)</b> + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTRxVref; + +/** Offset 0x0225 - RMT Scrambler + Enable or Disable scrambler during RMT test in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 RMTScrambler; + +/** Offset 0x0226 - RMT Step Size Override + Enable or Disable overriding the default step sizes in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 RMTStepSizeOverride; + +/** Offset 0x0227 - RMT TxDq + Step size of TxDq. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto(Default)</b>, + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTTxDq; + +/** Offset 0x0228 - RMT TxVref + Step size of TxVref. Auto: 1. Supported values: 1,2,4,8 in FSP - <b>1:Auto(Default)</b>, + 2:2, 4:4, 8:8. + 1:Auto, 2:2, 4:4, 8:8 +**/ + UINT8 RMTTxVref; + +/** Offset 0x0229 - DDR5 ECS + Enable/Disable DDR5 Error Check and Scrub (ECS) in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 ErrorCheckScrub; + +/** Offset 0x022A - Enforce Memory POR + 0:Enforce POR - Enforces Plan Of Record restrictions for DDR5 frequency and voltage + programming. <b>2:Disable - Disables this feature and user is able to run at higher + frequencies, specified in the DDR Frequency Limit field (limited by processor support)(Default)</b>. + 0:Enforce POR, 2:Disabled +**/ + UINT8 EnforceDdrMemoryFreqPor; + +/** Offset 0x022B - Enforce Population POR + Enable Memory Population POR Enforcement. Selecting Enforce Validated Populations + will only allow populations that have been validated in FSP - <b>0:Disable(Default)</b>, + 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 EnforcePopulationPor; + +/** Offset 0x022C - DDR PPR Type + Selects DDR Post Package Repair Type - 2: Hard PPR, <b>1: Soft PPR (Default)</b>, + 0: Disabled. + 0:Disabled, 2:Hard PPR, 1:Soft PPR +**/ + UINT8 pprType; + +/** Offset 0x022D - Force PPR On All Dram for UCE + Force PPR on all dram for UCE in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disabled, 1:Enabled +**/ + UINT8 ForcePprOnAllDramUce; + +/** Offset 0x022E +**/ + UINT8 UnusedUpdSpace12[2]; + +/** Offset 0x0230 - pprAddrVariablePtr + Pointer to array of PPR_ADDR_VARIABLE +**/ + UINT32 PprAddrVariablePtr; + +/** Offset 0x0234 - Allow Memory Test Correctable Error + Enable - Logs error and allows correctable errors during memory test(DIMM Rank not + removed). Disable - Logs error and removes DIMM Rank. Auto - Sets it to the MRC + default setting; current default is Enable in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 allowCorrectableMemTestError; + +/** Offset 0x0235 - Memory I/O Health Check + Memory I/O Health Check - 0: Auto, 1: Manual, <b>2: Disable (Default)</b>. Select + option Auto for default values. Manual for new values. Disable for disabling feature + in FSP - 0:Auto, 1:Manual, <b>2:Disable(Default)</b>. + 0:Auto, 1:Manual, 2:Disable +**/ + UINT8 MemIOHealthCheck; + +/** Offset 0x0236 - RxDqsDelay Left Edge + Offset for RxDqsDelay Left Edge in FSP. +**/ + UINT8 CriticalRxDqsDelayLeftEdge; + +/** Offset 0x0237 - RxDqsDelay Right Edge + Offset for RxDqsDelay Right in FSP. +**/ + UINT8 CriticalRxDqsDelayRightEdge; + +/** Offset 0x0238 - RxVref Left Edge + Offset for RxVref Left Edge in FSP. +**/ + UINT8 CriticalRxVrefLeftEdge; + +/** Offset 0x0239 - RxVref Right Edge + Offset for RxVref Right Edge in FSP. +**/ + UINT8 CriticalRxVrefRightEdge; + +/** Offset 0x023A - TxDqDelay Left Edge + Offset for TxDqDelay Left Edge in FSP. +**/ + UINT8 CriticalTxDqDelayLeftEdge; + +/** Offset 0x023B - TxDqDelay Right Edge + Offset for TxDqDelay Right Edge in FSP. +**/ + UINT8 CriticalTxDqDelayRightEdge; + +/** Offset 0x023C - TxVref Left Edge + Offset for TxDqDelay Left Edge in FSP. +**/ + UINT8 CriticalTxVrefLeftEdge; + +/** Offset 0x023D - TxVref Right Edge + Offset for TxDqDelay Right Edge in FSP. +**/ + UINT8 CriticalTxVrefRightEdge; + +/** Offset 0x023E - Reboot On Critical Failure + Reboot System on Critical failure to do Memory Training in FSP - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 ResetOnCriticalError; + +/** Offset 0x023F - Number of Times to Reboot and Retrain + Number of times to Reboot System on Critical failure to do Memory Training in FSP. +**/ + UINT8 CriticalRetries; + +/** Offset 0x0240 - Memory I/O Health Check Loop Count + CPGC Test Loop Count for Memory IO Health Test +**/ + UINT8 MemIOHealthLoopCount; + +/** Offset 0x0241 - Telemetry RxDqsDelay Left Edge + Offset for Telemetry RxDqsDelay Left Edge in FSP. +**/ + UINT8 TelemetryRxDqsDelayLeftEdge; + +/** Offset 0x0242 - Telemetry RxDqsDelay Right Edge + Offset for Telemetry RxDqsDelay Right Edge in FSP. +**/ + UINT8 TelemetryRxDqsDelayRightEdge; + +/** Offset 0x0243 - Telemetry RxVref Left Edge + Offset for Telemetry RxDqsDelay Left Edge in FSP. +**/ + UINT8 TelemetryRxVrefLeftEdge; + +/** Offset 0x0244 - Telemetry RxVref Right Edge + Offset for Telemetry RxDqsDelay Right Edge in FSP. +**/ + UINT8 TelemetryRxVrefRightEdge; + +/** Offset 0x0245 - Telemetry TxDqDelay Left Edge + Offset for Telemetry TxDqDelay Left Edge in FSP. +**/ + UINT8 TelemetryTxDqDelayLeftEdge; + +/** Offset 0x0246 - Telemetry TxDqDelay Right Edge + Offset for Telemetry TxDqDelay Right Edge in FSP. +**/ + UINT8 TelemetryTxDqDelayRightEdge; + +/** Offset 0x0247 - Volatile Memory Mode + Selects 1LM or 2LM mode for volatile memory. For 2LM memory mode, system will try + to configure 2LM but if system is unable to configure 2LM, volatile memory mode + will fall back to 1LM in FSP - <b>0: 1LM(Default)</b>, 1: 2LM, 2: MIX 1LM2LM. + 0: 1LM, 1: 2LM, 2: MIX 1LM2LM +**/ + UINT8 volMemMode; + +/** Offset 0x0248 - Dynamic ECC Mode Selection + Enable/Disable Dynamic ECC Mode Selection in FSP - 0:Disable, <b>1:Enable(Default)</b>, + 2:Enable + Allow 128b ECC. + 0:Disable, 1:Enable, 2:Enable + Allow 128b ECC +**/ + UINT8 DynamicEccModeSel; + +/** Offset 0x0249 - Memory Patrol Scrub + Memory Patrol Scrub - 0:Disable, 1:Enable during FspMemoryInit(), <b>2:Enable during + NotifyPhase(EnumInitPhaseReadyToBoot) (Default)</b>. + 0:Disable, 1:Enable during FspMemoryInit(), 2:Enable during EnumInitPhaseReadyToBoot +**/ + UINT8 PatrolScrub; + +/** Offset 0x024A - Memory Patrol Scrub + Memory Patrol Scrub - <b>0:Disable (Default)</b>, 1:Enable at ReadyToBootFsp(). + 0:Disable, 1:Enable Enable at ReadyToBootFsp() +**/ + UINT8 PatrolScrubNotify; + +/** Offset 0x024B - Patrol Scrub Interval + Patrol Scrub Interval in FSP. +**/ + UINT8 PatrolScrubDuration; + +/** Offset 0x024C - Patrol Scrub Address Mode + Selects the address mode between <b>1: System Physical Address (Default)</b>, 0:Reverse + Address in FSP. + 0:Reverse Address, 1:System Physical Address +**/ + UINT8 PatrolScrubAddrMode; + +/** Offset 0x024D - Memory Thermal Throttling Mode + Memory Configure Memory Thermal Throttling Mode in FSP - 0:Disable, <b>2:CLTT_ENABLE(Default)</b>, + 3:CLTT_PECI_ENABLE. + 0:Disable, 2:CLTT_ENABLE, 3:CLTT_PECI_ENABLE +**/ + UINT8 thermalthrottlingsupport; + +/** Offset 0x024E - Memory Correctable Error Threshold + Memory Correctable Error Threshold (1 - 32767) used for sparing and leaky bucket in FSP. +**/ + UINT16 spareErrTh; + +/** Offset 0x0250 - WR CRC feature Control + Enable/Disable Write CRC in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 WrCRC; + +/** Offset 0x0251 - Adaptive Refresh Management Level + Selects Adaptive Refresh Management(ARFM) Level when refresh management(RFM) is + required. <b>0:Default - RAAIMT, RAAMMT, RAADEC(Default)</b>; 1:Level A - RAAIMT-A, + RAAMMT-A, RAADEC-A; 2:Level B - RAAIMT-B, RAAMMT-B, RAADEC-B; 3:Level C - RAAIMT-C, + RAAMMT-C, RAADEC-C + 0:Default - RAAIMT; RAAMMT; RAADEC, 1:Level A - RAAIMT-A; RAAMMT-A; RAADEC-A, 2:Level + B - RAAIMT-B; RAAMMT-B; RAADEC-B, 3:Level C - RAAIMT-C; RAAMMT-C; RAADEC-C +**/ + UINT8 AdaptiveRefreshMgmtLevel; + +/** Offset 0x0252 - MEMHOT INPUT Control + Enable/Disable MEMHOT INPUT in FSP - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 MemHotIn; + +/** Offset 0x0253 - MEMHOT OUTPUT Mode + MEMHOT OUTPUT Mode in FSP - 0:Disable, <b>1:Enable only temphi(Default)</b>, 2:Enable + temphi & mid, 3:Enable temphi & mid & low. + 0:Disable, 1:Enable only temphi, 2:Enable temphi & mid, 3:Enable temphi & mid & low +**/ + UINT8 MemhotOutputOnlyOpt; + +/** Offset 0x0254 - CxlType3LegacyEn + Enable or disable CXL type 3 device using CXL type 2 flow - <b>0:Disable(Default)</b>, 1:Enable. + 0:Disable, 1:Enable +**/ + UINT8 DfxCxlType3LegacyEn; + +/** Offset 0x0255 - DfxPmicSecureMode + 0:Disable Pmic Secure Mode, 1:Enable Pmic Secure Mode, <b>2:Auto Pmic Secure Mode(Default)</b>. + 0:Disable Pmic Secure Mode, 1:Enable Pmic Secure Mode, 2:Auto Pmic Secure Mode +**/ + UINT8 DfxPmicSecureMode; + +/** Offset 0x0256 - IIO PcieSubSystemMode0 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode0[8]; + +/** Offset 0x025E - IIO PcieSubSystemMode1 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode1[8]; + +/** Offset 0x0266 - IIO PcieSubSystemMode2 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode2[8]; + +/** Offset 0x026E - IIO PcieSubSystemMode3 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode3[8]; + +/** Offset 0x0276 - IIO PcieSubSystemMode4 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode4[8]; + +/** Offset 0x027E - IIO PcieSubSystemMode5 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode5[8]; + +/** Offset 0x0286 - IIO PcieSubSystemMode6 + PcieSubSystemMode[MAX_SOCKET][0]: MAX_SOCKET=8, 0x00:IIO_MODE_GEN4_ONLY, 0x01:IIO_MODE_GEN5, + 0x02:IIO_MODE_CXL, 0x03:IIO_MODE_FORCE_CXL, <b>0x01:IIO_MODE_GEN5(Default)</b> +**/ + UINT8 IioPcieSubSystemMode6[8]; + +/** Offset 0x028E - CXL Header Bypass + Enable/Disable the CXL header bypass in FSP - <b>0:Disabled(Default)</b>, 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 DfxCxlHeaderBypass; + +/** Offset 0x028F - CXL Security Level + CXL Security Level<br>\n + 0: Fully Trusted - CXL Device can get access on CXL.$ for host-attached and device + attached memory ranges in the WB address space.<br>\n + 1: Partially Trusted - CXL Device can get access on CXL.$ for device attached memory + ranges only;<br>\n + 2: Untrusted - All requests on CXL.$ will be aborted by the Host.<br>\n + <b>3: Auto - Currently identical to Fully Trusted. (Default)</b> + 0:Fully Trusted, 1:Partially Trusted, 2:Untrusted, 3:Auto +**/ + UINT8 DfxCxlSecLvl; + +/** Offset 0x0290 +**/ + UINT32 DfxCxlDebugModePtr; + +/** Offset 0x0294 +**/ + UINT32 DfxCxlDebugModeNumber; + +/** Offset 0x0298 - Lock Chipset + Lock or Unlock chipset in FSP - <b>0:Disabled(Default)</b>, 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 LockChipset; + +/** Offset 0x0299 - MSR Lock Control + Enable - MSR 3Ah and CSR 80h will be locked in FSP. Power Good reset is needed to + remove lock bits - <b>0:Disabled(Default)</b>, 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 ProcessorMsrLockControl; + +/** Offset 0x029A - DFX Enable + When Enabled, Expose IIO DFX devices and other CPU devices like PMON in FSP - <b>0:Disabled(Default)</b>, + 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 DFXEnable; + +/** Offset 0x029B - DFX Disable Bios Done + When Enabled, suppresses notifying processor via MSR 151h that boot initialization + is finished in FSP - <b>0:Disabled(Default)</b>, 1:Enabled. + 0:Disable, 1:Enable +**/ + UINT8 DfxDisableBiosDone; + +/** Offset 0x029C - Processor Package C State + Package C State - 0: C0/C1 state, 1: C2 state, 2: C6(non Retention) state, 3: C6(Retention) + state, 7: No Limit, <b>0xFF: Auto (Default)</b> + 0: C0/C1 state, 1: C2 state, 2: C6(non Retention) state, 3: C6(Retention) state, + 7: No Limit, 0xFF: Auto +**/ + UINT8 CpuPmPackageCState; + +/** Offset 0x029D - Enhanced Intel SpeedStep(R) Tech + Enhanced Intel SpeedStep(R) Tech - <b>1: Enable(Default)</b>, 0: Disable. + 0:Disabled, 1:Enabled +**/ + UINT8 CpuPmEistEnable; + +/** Offset 0x029E - C1E + C1E - <b>1: Enable(Default)</b>, 0: Disable. +**/ + UINT8 CpuPmC1eEnable; + +/** Offset 0x029F - Intel SST-PP + Intel SST-PP Select allows user to choose level - <b>0xFF: Choose lowest level hardware + supported(Default)</b>, 0: Level 0, 3: Level 3, 4: Level 4. +**/ + UINT8 CpuPmIssTdpLevel; + +/** Offset 0x02A0 - Activate SST-BF + SST-BF - <b>0: Disable (Default)</b>, 1: Enabled. + 0:Disabled, 1:Enabled +**/ + UINT8 CpuPmProcessorActivePbf; + +/** Offset 0x02A1 +**/ + UINT8 UnusedUpdSpace13[7]; + +/** Offset 0x02A8 - Socket 0 Core Disable Bitmask + Set bit(s) to Disable or clear bit(s) to Enable core(s) on Socket 0. NOTE: Any core + disabled by user will force static SST-PP. +**/ + UINT64 CpuPmCoreDisableBitmask0; + +/** Offset 0x02B0 - Socket 1 Core Disable Bitmask + Set bit(s) to Disable or clear bit(s) to Enable core(s) on Socket 1. NOTE: Any core + disabled by user will force static SST-PP. +**/ + UINT64 CpuPmCoreDisableBitmask1; + +/** Offset 0x02B8 +**/ + UINT8 ReservedMemoryInitUpd[16]; + +/** IIO Board settings Hob Ptr + Pointer to array of IIO_BOARD_SETTINGS_HOB +**/ + UINT32 IioBoardSettingsHobPtr; + +/** IIO Board Settings Hob length + The IIO Board Settings Hob Length. +**/ + UINT32 IioBoardSettingsHobLength; + +/** BIOS Region Base + Pointer to the location of the BIOS Region +**/ + UINT32 BiosRegionBase; + +/** BIOS Region Size + The size of the BIOS Region in bytes +**/ + UINT32 BiosRegionSize; + +} FSPM_CONFIG; + +typedef struct { + +/** N/A +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** N/A +**/ + FSPM_ARCH2_UPD FspmArchUpd; + +/** N/A +**/ + FSPM_CONFIG FspmConfig; + +/** N/A +**/ + UINT16 UpdTerminator; + +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspsUpd.h new file mode 100644 index 0000000000..864a5a983f --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FspsUpd.h @@ -0,0 +1,292 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - Processor VmxEnable Function + Processor VmxEnable Function - <b>1: Enable(Default)</b>, 0: Disable Processor VmxEnable Function. + 0: Disable, 1: Enable +**/ + UINT8 VmxEnable; + +/** Offset 0x0021 - Processor TurboMode Function + Processor TurboMode Function - <b>1: Enable(Default)</b>, 0: Disable Processor TurboMode Function. + 0: Disable, 1: Enable +**/ + UINT8 TurboMode; + +/** Offset 0x0022 - Processor Safer Mode Extensions Function + Processor Safer Mode Extensions Function - <b>0: Disable(Default)</b>, 1: Enable + Processor Safer Mode Extensions Function. + 0: Disable, 1: Enable +**/ + UINT8 ProcessorSmxEnable; + +/** Offset 0x0023 - SstCp + SstCp - 1: Enable, <b>0: Disable SstCp(Default)</b>. + 0: Disable, 1: Enable +**/ + UINT8 SstCpSetting; + +/** Offset 0x0024 - SstCp Capable Status + SST-CP Capable Status in system - <b>0: Disable(Default)</b>, 1: Enable. + 0: Disable, 1: Enable +**/ + UINT8 SstCpCapableSystem; + +/** Offset 0x0025 +**/ + UINT8 UnusedUpdSpace0[1]; + +/** Offset 0x0026 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x0030 - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x003A - PchAdrEn + PchAdr - <b>0: PLATFORM POR(Default)</b>, 1: FORCE ENABLE, 2:FORCE DISABLE. + 0: PLATFORM POR, 1: FORCE ENABLE, 2: FORCE DISABLE +**/ + UINT8 PchAdrEn; + +/** FSP smm init enable + Enable / Disable FSP smm init + $EN_DIS +**/ + UINT8 FspSmmInitEn; + +/** Offset 0x003B - EnableTme + EnableTme - <b>0: Disabled(Default)</b>, 1: Enabled, 2:Software Controlled. + 0: Disabled, 1: Enabled, 2:Software Controlled +**/ + UINT8 EnableTme; + +/** Offset 0x003C - EnableTmeBypass + EnableTmeBypass - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 EnableTmeBypass; + +/** Offset 0x003D - SgxFactoryReset + SgxFactoryReset - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxFactoryReset; + +/** Offset 0x003E - EnableSgx + EnableSgx - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 EnableSgx; + +/** Offset 0x003F - SgxPackageInfoInBandAccess + SgxPackageInfoInBandAccess - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxPackageInfoInBandAccess; + +/** Offset 0x0040 - SgxQoS + SgxQoS - 0: Disabled, <b>1: Enabled(Default)</b>. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxQoS; + +/** Offset 0x0041 - EpochUpdate + EpochUpdate - 1: Change to New Random Owner EPOCHs, <b>2: Manual User Defined Owner + EPOCHs(Default)</b>. + 1: Change to New Random Owner EPOCHs, 2: Manual User Defined Owner EPOCHs +**/ + UINT8 EpochUpdate; + +/** Offset 0x0042 - SgxLeWr + SgxLeWr - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxLeWr; + +/** Offset 0x0043 - SgxDebugMode + SgxDebugMode - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxDebugMode; + +/** Offset 0x0044 - SgxAutoRegistrationAgent + SgxAutoRegistrationAgent - <b>0: Disabled(Default)</b>, 1: Enabled. + 0: Disabled, 1: Enabled +**/ + UINT8 SgxAutoRegistrationAgent; + +/** Offset 0x0045 - DfxSgxRegistrationServerSelect + DfxSgxRegistrationServerSelect - <b>0: SBX(Default)</b>, 1: PRX, 2:AUTO, 3:LIV, + 4:SW Defined Server. + 0: SBX, 1: PRX, 2:AUTO, 3:LIV, 4:SW Defined Server +**/ + UINT8 DfxSgxRegistrationServerSelect; + +/** Offset 0x0046 - Processor Enable Monitor MWAIT + Processor Enable Monitor MWAIT - <b>1: Enable(Default)</b>, 0: Disable Processor + Monitor MWAIT. + 0: Disabled, 1: Enabled +**/ + UINT8 CpuPmMonitorMWait; + +/** Offset 0x0047 - Processor C6 + Processor C6 - <b>1: Enable(Default)</b>, 0: Disable Processor C6 (ACPI C3) report to OS. + 0: Disabled, 1: Enabled +**/ + UINT8 CpuPmC6Enable; + +/** Offset 0x0048 - Hardware P-States + Hardware P-States - 0: Disable: Hardware chooses a P-state based on OS Request + (Legacy P-States), <b>1:Native Mode:Hardware chooses a P-state based on OS guidance(Default)</b>, + 2:Out of Band Mode:Hardware autonomously chooses a P-state (no OS guidance), 3:Native + Mode with No Legacy Support. + 0: Disable, 1: Native Mode, 2: Out of Band Mode, 3: Native Mode with No Legacy Support +**/ + UINT8 CpuPmProcessorHWPMEnable; + +/** Offset 0x0049 - Power Performance Tuning + Power Performance Tuning - <b>0: OS Controls EPB (Default)</b>, 1: BIOS Controls + EPB, 2: PECI Controls EPB. + 0: OS Controls EPB, 1: BIOS Controls EPB, 2: PECI Controls EPB +**/ + UINT8 CpuPmPwrPerfTuning; + +/** Offset 0x004A - Configure SST-BF + Allow (Default)/Disallow BIOS to configure SST-BF High Priority Cores so that SW + does not have to configure - 0:Disable, <b>1:Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 CpuPmProcessorConfigurePbf; + +/** Offset 0x004B - CF9 Global Reset Promotion + CF9 Global Reset Promotion - 1: Enable promoting CF9 reset to global, <b>0: Disable + promoting CF9 reset to global(Default)</b>. + 0: Disabled, 1: Enabled +**/ + UINT8 MeGrPromotionEnabled; + +/** Offset 0x004C - Global Reset Lock + Global Reset Lock - <b>1: Enable locking the joint ME and host reset capability(Default)</b>, + 0: Disable locking the joint ME and host reset capability. + 0: Disabled, 1: Enabled +**/ + UINT8 MeGrLockEnabled; + +/** Offset 0x004D - Delayed Authentication Mode + Enable or disable Delayed Authentication Mode - <b>0: Disable(Default)</b>, 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 DelayedAuthenticationMode; + +/** Offset 0x004E - Delayed Authentication Mode Override + Enable or disable Delayed Authentication Mode Override - <b>0: Disable(Default)</b>, + 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 DelayedAuthenticationModeOverride; + +/** Offset 0x004F - Core Bios Done Message + Enable or disable Core Bios Done message sent to ME - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 CoreBiosDoneEnabled; + +/** Offset 0x0050 - End Of Post Message + Enable or disable sending END_OF_POST message to ME - 0: Disable, 1: Send in PEI, + <b>2: Send in DXE(Default)</b>. + 0:Disable, 1:Send in PEI, 2:Send in DXE +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x0051 - HMRFPO_LOCK Message + Enable or disable sending HMRFPO_LOCK message to ME - 0: Disable, <b>1: Enable(Default)</b>. + 0:Disable, 1:Enable +**/ + UINT8 MeHmrfpoLockEnabled; + +/** Offset 0x0052 - HMRFPO_ENABLE Message + Enable or disable sending HMRFPO_ENABLE message to ME - <b>0: Disable(Default)</b>, + 1: Enable. + 0:Disable, 1:Enable +**/ + UINT8 MeHmrfpoEnableEnabled; + +/** Offset 0x0053 +**/ + UINT8 UnusedUpdSpace1[1]; + +/** Offset 0x0054 +**/ + UINT8 ReservedSiliconInitUpd[16]; +} FSPS_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPS_CONFIG FspsConfig; + +/** Offset 0x0064 +**/ + UINT8 UnusedUpdSpace2[2]; + +/** Offset 0x0066 +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FsptUpd.h new file mode 100644 index 0000000000..77ed502735 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/FsptUpd.h @@ -0,0 +1,103 @@ +/** @file + +Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPT_UPD_H__ +#define __FSPT_UPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + +typedef struct { + +/** N/A +**/ + UINT64 MicrocodeRegionBase; + +/** N/A +**/ + UINT64 MicrocodeRegionLength; + +/** N/A +**/ + UINT64 CodeRegionBase; + +/** N/A +**/ + UINT64 CodeRegionLength; + +} FSPT_CORE_UPD; + + +typedef struct { + +/** Offset 0x0040 - Disable Port80 output in FSP-T + Select Port80 Control in FSP-T - 0:VPD-Style, <b>1:Enable Port80 Output (Default)</b>, + 2:Disable Port80 Output, refer to FSP Integration Guide for details. + 0:VPD-Style, 1:Enable Port80 Output[Default], 2:Disable Port80 Output +**/ + UINT8 FsptPort80RouteDisable; + +/** N/A +**/ + UINT8 ReservedTempRamInitUpd[31]; + +} FSPT_CONFIG; + + +typedef struct { + +/** N/A +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** N/A +**/ + FSPT_ARCH2_UPD FsptArchUpd; + +/** N/A +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** N/A +**/ + FSPT_CONFIG FsptConfig; + +/** N/A +**/ + UINT16 UpdTerminator; + +} FSPT_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/IioPcieConfigUpd.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/IioPcieConfigUpd.h new file mode 100644 index 0000000000..65c2a42ff9 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/IioPcieConfigUpd.h @@ -0,0 +1,264 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _IIO_PCIE_CONFIG_UPD_H_ +#define _IIO_PCIE_CONFIG_UPD_H_ + +#ifndef MAX_SOCKET +#define MAX_SOCKET 4 +#endif + +#ifndef MAX_LOGIC_IIO_STACK +#define MAX_LOGIC_IIO_STACK 14 +#endif + +#ifndef MAX_IIO_PORTS_PER_SOCKET +#define MAX_IIO_PORTS_PER_SOCKET 57 +#endif + +#ifndef MAX_IOU_PER_SOCKET +#define MAX_IOU_PER_SOCKET 7 +#endif + +#define MAX_VMD_STACKS_PER_SOCKET 8 // Max number of stacks per socket supported by VMD + +#pragma pack(1) + +typedef enum { + PE0 = 0, + PE_MAX, + PE_ = 0xFF // temporary unknown value +} IIO_PACKAGE_PE; + +typedef struct { + UINT8 SLOTEIP[MAX_IIO_PORTS_PER_SOCKET]; // Electromechanical Interlock Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B17) + UINT8 SLOTHPCAP[MAX_IIO_PORTS_PER_SOCKET]; // Slot Hot Plug capable - Slot Capabilities (D0-10 / F0 / R0xA4 / B6) + UINT8 SLOTHPSUP[MAX_IIO_PORTS_PER_SOCKET]; // Hot Plug surprise supported - Slot Capabilities (D0-10 / F0 / R0xA4 / B5) + UINT8 SLOTPIP[MAX_IIO_PORTS_PER_SOCKET]; // Power Indicator Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B4) + UINT8 SLOTAIP[MAX_IIO_PORTS_PER_SOCKET]; // Attention Inductor Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B3) + UINT8 SLOTMRLSP[MAX_IIO_PORTS_PER_SOCKET]; // MRL Sensor Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B2) + UINT8 SLOTPCP[MAX_IIO_PORTS_PER_SOCKET]; // Power Controller Present - Slot Capabilities (D0-10 / F0 / R0xA4 /B1) + UINT8 SLOTABP[MAX_IIO_PORTS_PER_SOCKET]; // Attention Button Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B0) + UINT8 SLOTIMP[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 SLOTSPLS[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 SLOTSPLV[MAX_IIO_PORTS_PER_SOCKET]; + UINT16 SLOTPSP[MAX_IIO_PORTS_PER_SOCKET]; + BOOLEAN VppEnabled[MAX_IIO_PORTS_PER_SOCKET]; // 00 -- Disable, 01 -- Enable //no setup option defined- aj + UINT8 VppPort[MAX_IIO_PORTS_PER_SOCKET]; // 00 -- Port 0, 01 -- Port 1 //no setup option defined- aj + UINT8 VppAddress[MAX_IIO_PORTS_PER_SOCKET]; // 01-07 for SMBUS address of Vpp //no setup option defined- aj + UINT8 MuxAddress[MAX_IIO_PORTS_PER_SOCKET]; // SMBUS address of MUX //no setup option defined + UINT8 ChannelID[MAX_IIO_PORTS_PER_SOCKET]; // 00 -- channel 0, 01 -- channel 1 //no setup option defined + + UINT8 PciePortEnable[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 PEXPHIDE[MAX_IIO_PORTS_PER_SOCKET]; // Hide any of the DMI or PCIE devices - SKT 0,1,2,3; Device 0-10 PRD + UINT8 HidePEXPMenu[MAX_IIO_PORTS_PER_SOCKET]; // to suppress /display the PCIe port menu + UINT8 PciePortOwnership[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 RetimerConnectCount[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 ConfigIOU[MAX_IOU_PER_SOCKET]; // 00-x4x4x4x4, 01-x4x4x8NA, 02-x8NAx4x4, 03-x8NAx8NA, 04-x16 (P1p2p3p4) + UINT8 PcieHotPlugOnPort[MAX_IIO_PORTS_PER_SOCKET]; // Manual override of hotplug for port + UINT8 VMDEnabled[MAX_VMD_STACKS_PER_SOCKET]; + UINT8 VMDPortEnable[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 VMDHotPlugEnable[MAX_VMD_STACKS_PER_SOCKET]; + UINT8 PcieMaxPayload[MAX_IIO_PORTS_PER_SOCKET]; + UINT8 PciePortLinkSpeed[MAX_IIO_PORTS_PER_SOCKET]; // auto - 0(default); gen1 -1; gen2 -2; ... gen5 -5. + UINT8 DfxDnTxPresetGen3[MAX_IIO_PORTS_PER_SOCKET]; //auto - 0xFF(default); p0 - 0; p1 -1; ... p9 - 9. + UINT8 PcieGlobalAspm; + UINT8 PcieMaxReadRequestSize; +} UPD_IIO_PCIE_PORT_CONFIG; + +typedef struct { + UINT8 Address; + UINT8 Port; + UINT8 MuxAddress; + UINT8 MuxChannel; +} IIO_VPP_CFG; + +typedef struct { + UINT8 Eip : 1; // Electromechanical Interlock Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B17) + UINT8 HotPlugSurprise : 1; // Hot Plug surprise supported - Slot Capabilities (D0-10 / F0 / R0xA4 / B5) + UINT8 PowerInd : 1; // Power Indicator Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B4) + UINT8 AttentionInd : 1; // Attention Inductor Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B3) + UINT8 PowerCtrl : 1; // Power Controller Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B1) + UINT8 AttentionBtn : 1; // Attention Button Present - Slot Capabilities (D0-10 / F0 / R0xA4 / B0) + + UINT8 Reserved : 2; +} IIO_SLOT_CFG; + +typedef struct { + + IIO_VPP_CFG Vpp; + IIO_SLOT_CFG Slot; + + UINT8 VppEnabled :1; + UINT8 VppExpType :1; + + UINT8 SlotImplemented :1; + UINT8 Reserved :4; + + UINT16 HotPlug : 1; // If hotplug is supported on slot connected to this port + UINT16 MrlSensorPresent : 1; // If MRL is present on slot connected to this port + UINT16 SlotPowerLimitScale : 2; // Slot Power Scale for slot connected to this port + UINT16 SlotPowerLimitValue : 12; // Slot Power Value for slot connected to this port + + UINT16 PhysicalSlotNumber; // Slot number for slot connected to this port +} IIO_BOARD_SETTINGS_PER_PORT; + +typedef struct { + struct { + UINT8 Segment; ///< Remember segment, if it changes reset everything + UINT8 StackPciBusPoolSize[MAX_LOGIC_IIO_STACK]; ///< Number of bus numbers needed for IIO stack + } Socket[MAX_SOCKET]; +} SYSTEM_PCI_BUS_CONFIGURATION; + +typedef struct { + UINT64 Base; ///< Base (starting) address of a range (I/O, 32 and 64-bit mmio regions) + UINT64 Limit; ///< Limit (last valid) address of a range +} PCIE_BASE_LIMIT; + +typedef struct { + UINT32 MmioLSize; + UINT64 MmioHSize; +} CXL11_LIMITS; + +typedef struct { + PCIE_BASE_LIMIT Io; ///< Base and limit of I/O range assigned to entity + PCIE_BASE_LIMIT LowMmio; ///< Base and limit of low MMIO region for entity + PCIE_BASE_LIMIT HighMmio; ///< Base and limit of high (64-bit) MMIO region for entity +} PCI_BASE_LIMITS; + +typedef struct { + PCI_BASE_LIMITS SocketLimits; ///< Base and Limit of all PCIe resources for the socket + PCI_BASE_LIMITS StackLimits[MAX_LOGIC_IIO_STACK]; ///< Base and Limit of all PCIe resources for each stack of the socket + CXL11_LIMITS CxlStackReq[MAX_LOGIC_IIO_STACK]; ///< Base and Limit of CXL11 resources for each stack of the socket +} SOCKET_PCI_BASE_LIMITS; + +typedef struct { + // + // Save basic system configuration parameters along with the resource map to detect a change. + // Remember low and high I/O memory range when saving recource configuration. It is used to verify + // whether system memory map changed. Remember also stacks configured when creating the map. + // If anything changed reset the system PCI resource configuration. + // + UINT64 MmioHBase; + UINT64 MmioHGranularity; + UINT32 MmioLBase; + UINT32 MmioLLimit; + UINT32 MmioLGranularity; + UINT16 IoBase; + UINT16 IoLimit; + UINT16 IoGranularity; + UINT32 StackPresentBitmap[MAX_SOCKET]; + // + // Used by the PciHostBridge DXE driver, these variables don't need to be exposed through setup options + // The variables are used as a communication vehicle from the PciHostBridge DXE driver to an OEM hook + // which updates the KTI resource map. + // + SOCKET_PCI_BASE_LIMITS Socket[MAX_SOCKET]; ///< Base and limit of all PCIe resources for each socket +} SYSTEM_PCI_BASE_LIMITS; + +#define IIO_BIFURCATE_xxxxxxxx 0xFE +#define IIO_BIFURCATE_x4x4x4x4 0x0 +#define IIO_BIFURCATE_x4x4xxx8 0x1 +#define IIO_BIFURCATE_xxx8x4x4 0x2 +#define IIO_BIFURCATE_xxx8xxx8 0x3 +#define IIO_BIFURCATE_xxxxxx16 0x4 +#define IIO_BIFURCATE_x2x2x4x8 0x5 +#define IIO_BIFURCATE_x4x2x2x8 0x6 +#define IIO_BIFURCATE_x8x2x2x4 0x7 +#define IIO_BIFURCATE_x8x4x2x2 0x8 +#define IIO_BIFURCATE_x2x2x4x4x4 0x9 +#define IIO_BIFURCATE_x4x2x2x4x4 0xA +#define IIO_BIFURCATE_x4x4x2x2x4 0xB +#define IIO_BIFURCATE_x4x4x4x2x2 0xC +#define IIO_BIFURCATE_x2x2x2x2x8 0xD +#define IIO_BIFURCATE_x8x2x2x2x2 0xE +#define IIO_BIFURCATE_x2x2x2x2x4x4 0xF +#define IIO_BIFURCATE_x2x2x4x2x2x4 0x10 +#define IIO_BIFURCATE_x2x2x4x4x2x2 0x11 +#define IIO_BIFURCATE_x4x2x2x2x2x4 0x12 +#define IIO_BIFURCATE_x4x2x2x4x2x2 0x13 +#define IIO_BIFURCATE_x4x4x2x2x2x2 0x14 +#define IIO_BIFURCATE_x2x2x2x2x2x2x4 0x15 +#define IIO_BIFURCATE_x2x2x2x2x4x2x2 0x16 +#define IIO_BIFURCATE_x2x2x4x2x2x2x2 0x17 +#define IIO_BIFURCATE_x4x2x2x2x2x2x2 0x18 +#define IIO_BIFURCATE_x2x2x2x2x2x2x2x2 0x19 +#define IIO_BIFURCATE_AUTO 0xFF + +typedef enum { + IioBifurcation_UNKNOWN = IIO_BIFURCATE_xxxxxxxx, + IioBifurcation_x4x4x4x4 = IIO_BIFURCATE_x4x4x4x4, + IioBifurcation_x4x4xxx8 = IIO_BIFURCATE_x4x4xxx8, + IioBifurcation_xxx8x4x4 = IIO_BIFURCATE_xxx8x4x4, + IioBifurcation_xxx8xxx8 = IIO_BIFURCATE_xxx8xxx8, + IioBifurcation_xxxxxx16 = IIO_BIFURCATE_xxxxxx16, + IioBifurcation_x2x2x4x8 = IIO_BIFURCATE_x2x2x4x8, + IioBifurcation_x4x2x2x8 = IIO_BIFURCATE_x4x2x2x8, + IioBifurcation_x8x2x2x4 = IIO_BIFURCATE_x8x2x2x4, + IioBifurcation_x8x4x2x2 = IIO_BIFURCATE_x8x4x2x2, + IioBifurcation_x2x2x4x4x4 = IIO_BIFURCATE_x2x2x4x4x4, + IioBifurcation_x4x2x2x4x4 = IIO_BIFURCATE_x4x2x2x4x4, + IioBifurcation_x4x4x2x2x4 = IIO_BIFURCATE_x4x4x2x2x4, + IioBifurcation_x4x4x4x2x2 = IIO_BIFURCATE_x4x4x4x2x2, + IioBifurcation_x2x2x2x2x8 = IIO_BIFURCATE_x2x2x2x2x8, + IioBifurcation_x8x2x2x2x2 = IIO_BIFURCATE_x8x2x2x2x2, + IioBifurcation_x2x2x2x2x4x4 = IIO_BIFURCATE_x2x2x2x2x4x4, + IioBifurcation_x2x2x4x2x2x4 = IIO_BIFURCATE_x2x2x4x2x2x4, + IioBifurcation_x2x2x4x4x2x2 = IIO_BIFURCATE_x2x2x4x4x2x2, + IioBifurcation_x4x2x2x2x2x4 = IIO_BIFURCATE_x4x2x2x2x2x4, + IioBifurcation_x4x2x2x4x2x2 = IIO_BIFURCATE_x4x2x2x4x2x2, + IioBifurcation_x4x4x2x2x2x2 = IIO_BIFURCATE_x4x4x2x2x2x2, + IioBifurcation_x2x2x2x2x2x2x4 = IIO_BIFURCATE_x2x2x2x2x2x2x4, + IioBifurcation_x2x2x2x2x4x2x2 = IIO_BIFURCATE_x2x2x2x2x4x2x2, + IioBifurcation_x2x2x4x2x2x2x2 = IIO_BIFURCATE_x2x2x4x2x2x2x2, + IioBifurcation_x4x2x2x2x2x2x2 = IIO_BIFURCATE_x4x2x2x2x2x2x2, + IioBifurcation_x2x2x2x2x2x2x2x2 = IIO_BIFURCATE_x2x2x2x2x2x2x2x2, + IioBifurcation_Auto = IIO_BIFURCATE_AUTO +} IIO_BIFURCATION; + +typedef struct { + IIO_BIFURCATION Bifurcation; + UINT8 CxlSupportInUba :1; + UINT8 Reserved :7; + + IIO_BOARD_SETTINGS_PER_PORT Port[MAX_IIO_PORTS_PER_STACK]; +} IIO_BOARD_SETTINGS_PER_PE; + +typedef struct { + IIO_BOARD_SETTINGS_PER_PE Pe[MAX_IIO_PCIE_PER_SOCKET]; +} IIO_BOARD_SETTINGS_PER_SOCKET; + +typedef struct { + IIO_BOARD_SETTINGS_PER_SOCKET Socket[MAX_SOCKET]; +} IIO_BOARD_SETTINGS_HOB; + +#pragma pack() + +#endif // _IIO_PCIE_CONFIG_UPD_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/IioUniversalDataHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/IioUniversalDataHob.h new file mode 100644 index 0000000000..1689a4261b --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/IioUniversalDataHob.h @@ -0,0 +1,347 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _IIO_UNIVERSAL_DATA_HOB_H_ +#define _IIO_UNIVERSAL_DATA_HOB_H_ + +#define DINO_UID 0 +#define PC_UID 1 +#define UB_UID 4 +#define CPM0_UID 5 +#define HQM0_UID 6 + +#define IIO_UNIVERSAL_DATA_GUID { \ + 0xa1, 0x96, 0xf3, 0x7f, 0x7d, 0xee, 0x1e, 0x43, \ + 0xba, 0x53, 0x8f, 0xCa, 0x12, 0x7c, 0x44, 0xc0 \ +} + +#ifndef MAX_SOCKET +#define MAX_SOCKET 4 +#endif + +#if (MAX_SOCKET == 1) + #define MAX_FW_KTI_PORTS 4 // Maximum KTI PORTS to be used in structure definition. +#else + #define MAX_FW_KTI_PORTS 6 // Maximum KTI PORTS to be used in structure definition +#endif //(MAX_SOCKET == 1) + +#ifndef MAX_IMC +#define MAX_IMC 4 // Maximum memory controllers per socket +#endif + +#ifndef MAX_MC_CH +#define MAX_MC_CH 2 // Max number of channels per MC (3 for EP) +#endif + +#ifndef MAX_CH +#define MAX_CH ((MAX_IMC)*(MAX_MC_CH)) // Max channels per socket (worst case EP * EX combination = 16) +#endif + +#define MC_MAX_NODE (MAX_SOCKET * MAX_IMC) // Max number of memory nodes + +#ifndef MAX_IIO_PORTS_PER_SOCKET +#define MAX_IIO_PORTS_PER_SOCKET 57 +#endif + +#ifndef MAX_IIO_PORTS_PER_STACK +#define MAX_IIO_PORTS_PER_STACK 8 +#endif + +#ifndef MAX_IIO_PCIE_PER_SOCKET +#define MAX_IIO_PCIE_PER_SOCKET 1 +#endif + +#ifndef MAX_IIO_PCIROOTS_PER_STACK +#define MAX_IIO_PCIROOTS_PER_STACK 1 +#endif + +#ifndef MAX_IIO_STACK +#define MAX_IIO_STACK 12 +#endif + +#define MAX_LOGIC_IIO_STACK 14 + +#define MAX_COMPUTE_DIE 1 +#define MAX_CHA_MAP (2 * MAX_COMPUTE_DIE) //for GNR & SRF only, each compute die has its own CAPID6 & CAPID7 (i.e. 2 CAPID registers) + +#pragma pack(1) + +typedef struct _UINT64_STRUCT { + UINT32 lo; + UINT32 hi; +} UINT64_STRUCT, *PUINT64_STRUCT; + +#ifndef MMIO_BARS_ENUM +#define MMIO_BARS_ENUM +typedef enum { + TYPE_SCF_BAR = 0, + TYPE_PCU_BAR, + TYPE_MEM_BAR0, + TYPE_MEM_BAR1, + TYPE_MEM_BAR2, + TYPE_MEM_BAR3, + TYPE_MEM_BAR4, + TYPE_MEM_BAR5, + TYPE_MEM_BAR6, + TYPE_MEM_BAR7, + TYPE_SBREG_BAR, + TYPE_MAX_MMIO_BAR +} MMIO_BARS; +#endif + +typedef struct { + UINT8 Device; + UINT8 Function; +} IIO_PORT_INFO; + +typedef struct { + UINT8 Major; + UINT8 Minor; + UINT8 Revision; + UINT16 BuildNumber; +} RC_VERSION; + +//--------------------------------------------------------------------------------------// +// Structure definitions for Universal Data Store (UDS) +//--------------------------------------------------------------------------------------// +typedef struct { + UINT8 Valid; // TRUE, if the link is valid (i.e reached normal operation) + UINT8 PeerSocId; // Socket ID + UINT8 PeerSocType; // Socket Type (0 - CPU; 1 - IIO) + UINT8 PeerPort; // Port of the peer socket +} QPI_PEER_DATA; + +typedef struct { + UINT8 Valid; + UINT32 MmioBar[TYPE_MAX_MMIO_BAR]; + UINT8 PcieSegment; + UINT64_STRUCT SegMmcfgBase; + UINT32 StackPresentBitmap; + UINT16 CxlPresentBitmap; + UINT16 Cxl20CapableBitmap; + UINT8 TotM3Kti; + UINT8 TotCha; + UINT32 ChaList[MAX_CHA_MAP]; + UINT32 SocId; + QPI_PEER_DATA PeerInfo[MAX_FW_KTI_PORTS]; // QPI LEP info +} QPI_CPU_DATA; + +typedef struct { + UINT8 Valid; + UINT8 SocId; + QPI_PEER_DATA PeerInfo[MAX_SOCKET]; // QPI LEP info +} QPI_IIO_DATA; + +typedef struct { + IIO_PORT_INFO PortInfo[MAX_IIO_PORTS_PER_SOCKET]; +} IIO_DMI_PCIE_INFO; + +typedef struct _STACK_RES { + UINT8 Personality; + UINT8 BusBase; // Base of Bus configured for this stack + UINT8 BusLimit; // Limit of Bus configured for this stack + UINT16 IoBase; // Base of IO configured for this stack + UINT16 IoLimit; // Limit of IO configured for this stack + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this stack in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this stack in memory map + UINT64 Mmio64Base; // Base of high MMIO configured for this stack in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this stack in memory map + UINT8 PciResourceBusBase; // Base of Bus resource available for PCI devices + UINT8 PciResourceBusLimit; // Limit of Bus resource available for PCI devices + UINT16 PciResourceIoBase; // Base of IO resource available for PCI devices + UINT16 PciResourceIoLimit; // Limit of IO resource available for PCI devices + UINT32 PciResourceMem32Base; // Base of low MMIO resource available for PCI devices + UINT32 PciResourceMem32Limit; // Limit of low MMIO resource available for PCI devices + UINT64 PciResourceMem64Base; // Base of high MMIO resource available for PCI devices + UINT64 PciResourceMem64Limit; // Limit of high MMIO resource available for PCI devices + UINT32 VtdBarAddress; // NOTE: Obsolete, not used in next gen platforms +} STACK_RES; + +/** + * PCI resources that establish one PCI hierarchy for PCI Enumerator. + */ +typedef struct { + UINT16 UidType; // Type of UID for this root bridge. + UINT8 BusBase; // Base of PCI bus numbers available for PCI devices + UINT8 BusLimit; // Limit of PCI bus numbers available for PCI devices + UINT16 IoBase; // Base of IO resources available for PCI devices + UINT16 IoLimit; // Limit of IO resources available for PCI devices + UINT32 Mmio32Base; // Base of low MMIO resources available for PCI devices + UINT32 Mmio32Limit; // Limit of low MMIO resources available for PCI devices + UINT64 Mmio64Base; // Base of high MMIO resources available for PCI devices + UINT64 Mmio64Limit; // Limit of high MMIO resources available for PCI devices +} UDS_PCIROOT_RES; + +typedef struct { + UINT8 Personality; + UINT8 PciRootBridgeNum; // Number of valid entries in PciRoot[] table + UINT8 BusBase; // Base of Bus configured for this stack + UINT8 BusLimit; // Limit of Bus configured for this stack + UINT16 IoBase; // Base of IO configured for this stack + UINT16 IoLimit; // Limit of IO configured for this stack + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this stack in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this stack in memory map + UINT32 Mmio32MinSize; // The size of MMIO32 needed in PEI that must be preserved in rebalance + UINT64 Mmio64Base; // Base of high MMIO configured for this stack in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this stack in memory map + UDS_PCIROOT_RES PciRoot[MAX_IIO_PCIROOTS_PER_STACK]; + UINT64 VtbarAddress; // VT-d Base Address +} UDS_STACK_RES; + +typedef struct { + UINT8 Valid; + UINT8 SocketID; // Socket ID of the IIO (0..3) + UINT8 BusBase; + UINT8 BusLimit; + UINT16 IoBase; + UINT16 IoLimit; + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this socket in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this socket in memory map + UINT64 Mmio64Base; // Base of high MMIO configured for this socket in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this socket in memory map + UDS_STACK_RES StackRes[MAX_LOGIC_IIO_STACK]; +} UDS_SOCKET_RES; + +typedef struct { + UINT8 Valid; + UINT8 SocketID; // Socket ID of the IIO (0..3) + UINT8 BusBase; + UINT8 BusLimit; + UINT16 PciResourceIoBase; + UINT16 PciResourceIoLimit; + UINT32 IoApicBase; + UINT32 IoApicLimit; + UINT32 Mmio32Base; // Base of low MMIO configured for this socket in memory map + UINT32 Mmio32Limit; // Limit of low MMIO configured for this socket in memory map + UINT64 Mmio64Base; // Base of high MMIO configured for this socket in memory map + UINT64 Mmio64Limit; // Limit of high MMIO configured for this socket in memory map + UDS_STACK_RES StackRes[MAX_LOGIC_IIO_STACK]; + IIO_DMI_PCIE_INFO PcieInfo; // NOTE: Obsolete, not used in next gen platforms +} IIO_RESOURCE_INSTANCE; + +typedef struct { + UINT16 PlatGlobalIoBase; // Global IO Base + UINT16 PlatGlobalIoLimit; // Global IO Limit + UINT32 PlatGlobalMmio32Base; // Global Mmiol base + UINT32 PlatGlobalMmio32Limit; // Global Mmiol limit + UINT64 PlatGlobalMmio64Base; // Global Mmioh Base [43:0] + UINT64 PlatGlobalMmio64Limit; // Global Mmioh Limit [43:0] + QPI_CPU_DATA CpuQpiInfo[MAX_SOCKET]; // QPI related info per CPU + QPI_IIO_DATA IioQpiInfo[MAX_SOCKET]; // QPI related info per IIO + UINT32 MemTsegSize; + UINT64 PciExpressBase; + UINT32 PciExpressSize; + UINT32 MemTolm; + UDS_SOCKET_RES IIO_resource[MAX_SOCKET]; + UINT8 numofIIO; + UINT8 MaxBusNumber; + UINT32 packageBspApicID[MAX_SOCKET]; // This data array is valid only for SBSP, not for non-SBSP CPUs. <AS> for CpuSv + UINT8 EVMode; + UINT8 SkuPersonality[MAX_SOCKET]; + UINT16 IoGranularity; + UINT32 MmiolGranularity; + UINT64_STRUCT MmiohGranularity; + UINT8 RemoteRequestThreshold; //5370389 + UINT32 UboxMmioSize; + UINT32 MaxAddressBits; +} PLATFORM_DATA; + +typedef struct { + UINT8 CurrentUpiiLinkSpeed;// Current programmed UPI Link speed (Slow/Full speed mode) + UINT8 CurrentUpiLinkFrequency; // Current requested UPI Link frequency (in GT) + UINT8 OutKtiCpuSktHotPlugEn; // 0 - Disabled, 1 - Enabled for PM X2APIC + UINT32 OutKtiPerLinkL1En[MAX_SOCKET]; // output kti link enabled status for PM + UINT8 IsocEnable; + UINT32 meRequestedSize; // Size of the memory range requested by ME FW, in MB + UINT8 DmiVc1; + UINT8 DmiVcm; + UINT32 CpuPCPSInfo; + UINT8 cpuSubType; + UINT8 SystemRasType; + UINT8 numCpus; // 1,..4. Total number of CPU packages installed and detected (1..4)by QPI RC + UINT16 tolmLimit; + RC_VERSION RcVersion; + BOOLEAN MsrTraceEnable; + UINT8 DdrXoverMode; // DDR 2.2 Mode + // For RAS + UINT8 bootMode; + UINT8 OutClusterOnDieEn; // Whether RC enabled COD support + UINT8 OutSncEn; + UINT8 OutNumOfCluster; + UINT8 imcEnabled[MAX_SOCKET][MAX_IMC]; + UINT16 LlcSizeReg; + UINT8 chEnabled[MAX_SOCKET][MAX_CH]; + UINT8 memNode[MC_MAX_NODE]; + UINT8 IoDcMode; + UINT8 DfxRstCplBitsEn; + UINT8 BitsUsed; //For 5 Level Paging +} SYSTEM_STATUS; + +typedef struct { + PLATFORM_DATA PlatformData; + SYSTEM_STATUS SystemStatus; + UINT32 OemValue; +} IIO_UDS; + +typedef enum { + //for ICX + IioStack0 = 0, // DmiAsPcie + IioStack1 = 1, // IOU0 + IioStack2 = 2, // IOU1 + IioStack3 = 3, // IOU2 + IioStack4 = 4, // IOU3 + IioStack5 = 5, // IOU4 + //for SPR + IioStack6 = 6, // IOU5 + IioStack7 = 7, + IioStack8 = 8, + IioStack9 = 9, + IioStack10 = 10, + IioStack11 = 11, + //for later SOC + IioStack12 = 12, + IioStack13 = 13, + IioStack14 = 14, + IioStack15 = 15, + IioStack16 = 16, + IioStack17 = 17, + IioStack18 = 18, + IioStackUnknown = 0xFF +} IIO_STACK; + +#pragma pack() + +#endif //#ifndef _IIO_UNIVERSAL_DATA_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/MemoryMapDataHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/MemoryMapDataHob.h new file mode 100644 index 0000000000..ce47106fe0 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/MemoryMapDataHob.h @@ -0,0 +1,370 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _MEMORY_MAP_DATA_HOB_H_ +#define _MEMORY_MAP_DATA_HOB_H_ + +#define MEMORY_MAP_HOB_GUID { 0xf8870015, 0x6994, 0x4b98, { 0x95, 0xa2, 0xbd, 0x56, 0xda, 0x91, 0xc0, 0x7f } } + +#ifndef MAX_SOCKET +#define MAX_SOCKET 4 +#endif + +#ifndef MAX_IMC +#define MAX_IMC 4 // Maximum memory controllers per socket +#endif + +#ifndef MAX_MC_CH +#define MAX_MC_CH 2 // Max number of channels per MC (3 for EP) +#endif + +#ifndef MAX_CH +#define MAX_CH ((MAX_IMC)*(MAX_MC_CH)) // Max channels per socket (worst case EP * EX combination = 16) +#endif + +#define MAX_CXL_AMT 0 + +#ifndef MAX_UNIQUE_NGN_DIMM_INTERLEAVE +#define MAX_UNIQUE_NGN_DIMM_INTERLEAVE 2 // Max number of unique interleaves for NGN DIMM +#endif + +#ifndef MAX_SPARE_RANK +#define MAX_SPARE_RANK 2 // Max number of spare ranks in a channel +#endif + +#ifndef MAX_HBM_IO +#define MAX_HBM_IO 4 +#endif + +#ifndef MAX_DIMM +#define MAX_DIMM 2 // Max DIMM per channel +#endif + +#ifndef MAX_RANK_DIMM +#define MAX_RANK_DIMM 2 +#endif + +#ifndef MAX_DRAM_CLUSTERS +#define MAX_DRAM_CLUSTERS 4 +#endif + +#ifndef MAX_SAD_RULES +#define MAX_SAD_RULES 16 +#endif + +#ifndef MAX_FPGA_REMOTE_SAD_RULES +#define MAX_FPGA_REMOTE_SAD_RULES 2 // Maximum FPGA sockets exists on ICX platform +#endif + +#define MAX_SI_SOCKET 8 // Maximum silicon supported socket number + +#define MAX_AMT (MAX_IMC+MAX_CXL_AMT) // Max abstract memory target per socket +#define AMT_MAX_NODE ((MAX_AMT)*(MAX_SOCKET)) // Max abstract memory target for all sockets + +// NGN +#define NGN_MAX_SERIALNUMBER_STRLEN 4 +#define NGN_MAX_PARTNUMBER_STRLEN 30 +#define NGN_FW_VER_LEN 4 +#define NGN_LOG_TYPE_NUM 2 +#define NGN_LOG_LEVEL_NUM 2 + +/** + * Memory channel index conversion macros. + * + * We got two types of memory channel indexes: + * - socket channel - indexes 0..MAX_CH, used in [socket][channel] indexing + * - IMC channel - indexes 0..MAX_MC_CH, used in [socket][IMC][channel] indexing + * The below defined macros convert one channel index to the other one. + */ +#define MEM_SKTCH_TO_IMC(SktCh) ((SktCh) / MAX_MC_CH) +#define MEM_SKTCH_TO_IMCCH(SktCh) ((SktCh) % MAX_MC_CH) +#define MEM_IMCCH_TO_SKTCH(Imc, Ch) ((Imc) * MAX_MC_CH + (Ch)) + +#define MEM_64MB_TO_BYTES(Size64M) ((UINT64)(Size64M) << 26) +#define MEM_64MB_TO_KBYTES(Size64M) ((UINT64)(Size64M) << 16) +#define MEM_64MB_TO_MBYTES(Size64M) ((UINT64)(Size64M) << 6) +#define MEM_64MB_TO_GBYTES(Size64M) ((Size64M) >> 4) +#define MEM_BYTES_TO_64MB(SizeB) ((SizeB) >> 26) +#define MEM_KBYTES_TO_64MB(SizeKB) ((SizeKB) >> 16) +#define MEM_MBYTES_TO_64MB(SizeMB) ((SizeMB) >> 6) + +typedef UINT8 CXL_INTLV_SET_KEY; + +#define FSP_RESERVED1_LEN 77 +#define FSP_RESERVED2_LEN 2174 +#define FSP_RESERVED3_LEN 21 +#define FSP_RESERVED4_LEN 130 +#define FSP_RESERVED5_LEN 10 +#define FSP_RESERVED6_LEN 800 +#pragma pack(1) + +typedef enum { + DIMM_RANK_MAP_OUT_UNKNOWN = 0, + DIMM_RANK_MAP_OUT_MEM_DECODE, + DIMM_RANK_MAP_OUT_POP_POR_VIOLATION, + DIMM_RANK_MAP_OUT_RANK_DISABLED, + DIMM_RANK_MAP_OUT_ADVMEMTEST_FAILURE, + DIMM_RANK_MAP_OUT_MAX +} DIMM_RANK_MAP_OUT_REASON; + +struct RankDevice { + UINT8 enabled; // 0 = disabled, 1 = enabled + UINT8 logicalRank; // Logical Rank number (0 - 7) + UINT16 rankSize; // Units of 64 MB +}; + +struct PersisentDpaMap +{ + UINT32 perRegionDPAOffset; + UINT32 SPALimit; +}; + +typedef struct firmwareRev { + UINT8 majorVersion; + UINT8 minorVersion; + UINT8 hotfixVersion; + UINT16 buildVersion; +} FIRMWARE_REV; + +typedef struct DimmDevice { + UINT8 Present; + BOOLEAN Enabled; + UINT8 DcpmmPresent; // 1 - This is a DCPMM + UINT8 X4Present; + UINT8 DramIoWidth; // Actual DRAM IO Width (4, 8, 16) + UINT8 NumRanks; + UINT8 keyByte; + UINT8 actKeyByte2; // Actual module type reported by SPD + UINT8 actSPDModuleOrg; // Actual number of DRAM ranks and device width + UINT8 dimmTs; // Thermal sensor data. + UINT16 VolCap; // Volatile capacity (AEP DIMM only) + UINT16 nonVolCap; // Non-volatile capacity (AEP DIMM only) + UINT16 DimmSize; + UINT32 NVmemSize; + UINT16 SPDMMfgId; // Module Mfg Id from SPD + UINT16 VendorID; + UINT16 DeviceID; + UINT16 RevisionID; + UINT32 perRegionDPA; // DPA of PMEM that Nfit needs + struct PersisentDpaMap perDPAMap[MAX_UNIQUE_NGN_DIMM_INTERLEAVE]; // DPA map + UINT8 serialNumber[NGN_MAX_SERIALNUMBER_STRLEN]; // Serial Number + UINT8 PartNumber[NGN_MAX_PARTNUMBER_STRLEN]; // Part Number + UINT8 FirmwareVersionStr[NGN_FW_VER_LEN]; // Used to update the SMBIOS TYPE 17 + struct firmwareRev FirmwareVersion; // Firmware revision + struct RankDevice rankList[MAX_RANK_DIMM]; + UINT16 InterfaceFormatCode; + UINT16 SubsystemVendorID; + UINT16 SubsystemDeviceID; + UINT16 SubsystemRevisionID; + UINT16 FisVersion; // Firmware Interface Specification version + UINT8 DimmSku; // Dimm SKU info + UINT8 manufacturingLocation; // Manufacturing location for the NVDIMM + UINT16 manufacturingDate; // Date the NVDIMM was manufactured + INT32 commonTck; + UINT8 EnergyType; // 0: 12V aux power; 1: dedicated backup energy source; 2: no backup energy source + BOOLEAN NvDimmNPresent; // JEDEC NVDIMM-N Type Memory Present + UINT8 CidBitMap; // SubRankPer CS for DIMM device + UINT16 SPDRegVen; // Register Vendor ID in SPD + DIMM_RANK_MAP_OUT_REASON MapOutReason; +} MEMMAP_DIMM_DEVICE_INFO_STRUCT; + +struct ChannelDevice { + UINT8 Enabled; // 0 = channel disabled, 1 = channel enabled + UINT8 Features; // Bit mask of features to enable or disable + UINT8 MaxDimm; // Number of DIMM + UINT8 NumRanks; // Number of ranks on this channel + UINT8 chFailed; + UINT8 ngnChFailed; + UINT8 Is9x4DimmPresent; // 9x4 dimm present indicator + UINT8 SpareLogicalRank[MAX_SPARE_RANK]; // Logical rank, selected as Spare + UINT8 SparePhysicalRank[MAX_SPARE_RANK]; // Physical rank, selected as spare + UINT16 SpareRankSize[MAX_SPARE_RANK]; // spare rank size + UINT8 EnabledLogicalRanks; // Bitmap of Logical ranks that are enabled + UINT8 DdrPopulationMap; // Bitmap to indicate location of DDR DIMMs within the channel memory slots (BIT0: Ch.D0, BIT1: CH.D1) + UINT8 PmemPopulationMap; // Bitmap to indicate location of PMem modules within the channel memory slots (BIT0: Ch.D0, BIT1: CH.D1) + MEMMAP_DIMM_DEVICE_INFO_STRUCT DimmInfo[MAX_DIMM]; +}; + +struct memcontroller { + UINT32 MemSize; +}; + +typedef enum { + MemTypeNone = 0, + MemType1lmDdr, + MemType1lmAppDirect, + MemType1lmAppDirectReserved, + MemType1lmCtrl, + MemType1lmHbm, + MemTypeNxm, + MemType2lmDdrCacheMemoryMode, + MemType2lmDdrWbCacheAppDirect, + MemType2lmHbmCacheDdr, + MemType2lmHbmCacheMemoryMode, + MemTypeCxlAccVolatileMem, + MemTypeCxlAccPersistentMem, + MemTypeFpga, + MemTypeCxlExpVolatileMem, + MemTypeCxlExpPersistentMem, + MemTypeCxl2lmDdrCacheMem, + MemTypeCxlHetero, + MemTypeMax +} MEM_TYPE; + +typedef struct SADTable { + UINT8 Enable; // Rule enable + MEM_TYPE type; // Bit map of memory region types, See defines 'MEM_TYPE_???' above for bit definitions of the ranges. + UINT8 granularity; // Interleave granularities for current SAD entry. Possible interleave granularity options depend on the SAD entry type. Note that SAD entry type BLK Window and CSR/Mailbox/Ctrl region do not support any granularity options + UINT32 Base; // Base of the current SAD entry + UINT32 Limit; // Limit of the current SAD entry + UINT8 ways; // Interleave ways for SAD + UINT8 channelInterBitmap[MAX_AMT]; //Bit map to denote which DDR4/NM channels are interleaved per IMC eg: 111b - Ch 2,1 & 0 are interleaved; 011b denotes Ch1 & 0 are interleaved + UINT8 FMchannelInterBitmap[MAX_AMT]; //Bit map to denote which FM channels are interleaved per IMC eg: 111b - Ch 2,1 & 0 are interleaved; 011b denotes Ch1 & 0 are interleaved + UINT8 NmChWays; // Channel Interleave ways for SAD. Represents channelInterBitmap ways for DDR4/NM. + UINT8 FmChWays; // Channel Interleave ways for SAD. Represents FMchannelInterBitmap ways for DDRT. + UINT16 imcInterBitmap; // Bit map to denote which IMCs are interleaved from this socket. + UINT16 NmImcInterBitmap; // Bit map to denote which IMCs are interleaved from this socket as NM. + BOOLEAN local; // 0 - Remote 1- Local + UINT8 IotEnabled; // To indicate if IOT is enabled + UINT8 mirrored; // To Indicate the SAD is mirrored while enabling partial mirroring + UINT8 Attr; + UINT8 tgtGranularity; // Interleave mode for target list + UINT8 Cluster; // SNC cluster, hemisphere, or quadrant index. + UINT8 HostBridgeGran; // Host bridge interleaving granularity. + UINT32 HotPlugPadSize; // Memory size padded for CXL hot plug. 0 if it is not a CXL hot plug SAD. + CXL_INTLV_SET_KEY CxlIntlvSetKey; // The unique key of CXL interleave set. (7nm) +} SAD_TABLE; + +typedef struct socket { + UINT8 SocketEnabled; + UINT32 IioStackBitmap; + BOOLEAN HbmIoEn[MAX_HBM_IO]; // Flag indicates if HBM IO is enabled. TRUE: HBM IO is Enabled, FALSE: HBM IO is disabled. + UINT8 imcEnabled[MAX_IMC]; + UINT8 SadIntList[MAX_DRAM_CLUSTERS * MAX_SAD_RULES][AMT_MAX_NODE]; // SAD interleave list + UINT32 SktTotMemMapSPA; // Total memory mapped to SPA + UINT32 SktMemSize2LM; // Total memory excluded from Limit + SAD_TABLE SAD[MAX_DRAM_CLUSTERS * MAX_SAD_RULES]; // SAD table + struct memcontroller imc[MAX_IMC]; + struct ChannelDevice ChannelInfo[MAX_CH]; +} MEMMAP_SOCKET; + +typedef struct { + UINT8 Enabled; // Indicates if this EDC is enabled + UINT32 MemAsCache; // Memory used as Cache, in 64MB units + UINT32 MemAsFlat; // Memory used as Flat memory, in 64MB units +} EDC_INFO; + +typedef struct SystemMemoryMapElement { + UINT16 Type; // Type of this memory element; Bit0: 1LM Bit1: 2LM Bit2: PMEM Bit3: PMEM-cache Bit4: BLK Window Bit5: CSR/Mailbox/Ctrl region + UINT8 NodeId; // Node ID of the HA Owning the memory + UINT8 SocketId; // Socket Id of socket that has his memory - ONLY IN NUMA + UINT8 SktInterBitmap; // Socket interleave bitmap, if more that on socket then ImcInterBitmap and ChInterBitmap are identical in all sockets + UINT16 ImcInterBitmap; // IMC interleave bitmap for this memory + UINT8 ChInterBitmap[MAX_IMC];//Bit map to denote which channels are interleaved per IMC eg: 111b - Ch 2,1 & 0 are interleaved; 011b denotes Ch1 & 0 are interleaved + UINT32 BaseAddress; // Base Address of the element in 64MB chunks + UINT32 ElementSize; // Size of this memory element in 64MB chunks +} SYSTEM_MEMORY_MAP_ELEMENT; + +typedef struct SystemMemoryMapHob { + // + // Total Clusters. In SNC2 mode there are 2 clusters and SNC4 mode has 4 clusters. + // All2All/Quad/Hemi modes can be considered as having only one cluster (i.e SNC1). + // + UINT8 TotalClusters; + + UINT8 reserved1[FSP_RESERVED1_LEN]; // MEMORY_MAP_BLOCK_DECODER_DATA BlockDecoderData; // block decoder data structure + UINT32 lowMemBase; // Mem base in 64MB units for below 4GB mem. + UINT32 lowMemSize; // Mem size in 64MB units for below 4GB mem. + UINT32 highMemBase; // Mem base in 64MB units for above 4GB mem. + UINT32 highMemSize; // Mem size in 64MB units for above 4GB mem. + UINT32 memSize; // Total physical memory size + UINT16 memFreq; // Mem Frequency + UINT16 HbmFreq; // HBM Frequency in MHz. + UINT8 memMode; // 0 - Independent, 1 - Lockstep + UINT8 volMemMode; // 0 - 1LM, 1 - 2LM + UINT8 CacheMemType; // 0 - DDR$DDRT, 1 - HBM$DDR. Only valid if volMemMode is 2LM + UINT16 DramType; + UINT8 DdrVoltage; + BOOLEAN SupportedPMemPresent; // TRUE if at least one PMem is present and supported by BIOS + BOOLEAN EkvPresent; // Set if EKV controller on system + BOOLEAN BwvPresent; // Set if BWV controller on system + BOOLEAN CwvPresent; // Set if CWV controller on system + UINT8 XMPProfilesSup; + UINT8 XMPCapability; + // + // HBM Specific Info. + // + UINT16 HbmInstances[MAX_SOCKET]; // Total HBM instances + UINT32 HbmFlatMemSize; // Total HBM memory size in 64MB units, if HBM used as Flat memory + UINT32 HbmCacheMemSize; // Total HBM memory used as cache, if HBM used as Cache memory + UINT16 HbmSpeed; // Configured HBM (i.e OPIO channel) speed in MT/s. + UINT16 MaxHbmSpeed; // Max HBM (i.e OPIO channel) speed in MT/s. + UINT8 SystemRasType; + UINT8 RasModesEnabled; // RAS modes that are enabled + UINT16 ExRasModesEnabled; // Extended RAS modes that are enabled + UINT8 sncEnabled; // 0 - SNC disabled for this configuration, 1 - SNC enabled for this configuration + UINT8 NumOfCluster; + UINT8 NumChPerMC; + UINT8 numberEntries; // Number of Memory Map Elements + SYSTEM_MEMORY_MAP_ELEMENT Element[(MAX_SOCKET * MAX_DRAM_CLUSTERS * MAX_SAD_RULES) + MAX_FPGA_REMOTE_SAD_RULES]; + UINT8 reserved2[FSP_RESERVED2_LEN]; // struct memSetup MemSetup; + UINT8 reserved3[FSP_RESERVED3_LEN]; // MEM_DFXMEMVARS DfxMemVar; + MEMMAP_SOCKET Socket[MAX_SOCKET]; + UINT8 reserved4[FSP_RESERVED4_LEN]; // struct memTiming profileMemTime[XMP_MAX_PROFILES]; + + UINT8 reserved5[FSP_RESERVED5_LEN]; // RASMEMORYINFO RasMeminfo; + UINT8 LatchSystemShutdownState; + BOOLEAN IsWpqFlushSupported; + UINT8 EadrSupport; + UINT8 EadrCacheFlushMode; + UINT8 SetSecureEraseSktChHob[MAX_SOCKET][MAX_CH]; //MAX_CH * MAX_SOCKET * MAX_DCPMM_CH + UINT8 reserved6[FSP_RESERVED6_LEN]; // HOST_DDRT_DIMM_DEVICE_INFO_STRUCT HostDdrtDimmInfo[MAX_SOCKET][MAX_CH]; + UINT32 DdrCacheSize[MAX_SOCKET][MAX_CH]; // Size of DDR memory reserved for 2LM cache (64MB granularity) + BOOLEAN AdrStateForPmemModule[MAX_SOCKET][MAX_CH]; // ADR state for Intel PMEM Modules + UINT16 BiosFisVersion; // Firmware Interface Specification version currently supported by BIOS + UINT16 MaxAveragePowerLimit; // Max Power limit in mW used for averaged power ( Valid range ends at 15000mW) + UINT16 MinAveragePowerLimit; // Min Power limit in mW used for averaged power ( Valid range starts from 10000mW) + UINT16 CurrAveragePowerLimit; // Current Power limit in mW used for average power + UINT16 MaxMbbPowerLimit; // Max MBB power limit ( Valid range ends at 18000mW). + UINT16 MinMbbPowerLimit; // Min MBB power limit ( Valid range starts from 15000mW). + UINT16 CurrMbbPowerLimit; // Current Power limit in mW used for MBB power + UINT32 MaxMbbAveragePowerTimeConstant; // Max MBB Average Power Time Constant + UINT32 MinMbbAveragePowerTimeConstant; // Min MBB Average Power Time Constant + UINT32 CurrMbbAveragePowerTimeConstant; // Current MBB Average Power Time Constant + UINT32 MmiohBase; // MMIOH base in 64MB granularity + UINT8 MaxSadRules; // Maximum SAD entries supported by silicon (24 for 14nm silicon, 16 for 10nm silicon) + UINT8 NumberofChaDramClusters; // Number of CHA DRAM decoder clusters + BOOLEAN VirtualNumaEnable; // Enable or Disable Virtual NUMA + UINT8 VirtualNumOfCluster; // Number of Virtual NUMA nodes in each physical NUMA node (Socket or SNC cluster) +} SYSTEM_MEMORY_MAP_HOB; + +#pragma pack() + +#endif // _MEMORY_MAP_DATA_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/PrevBootErrSrcHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/PrevBootErrSrcHob.h new file mode 100644 index 0000000000..f1d55542c3 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/PrevBootErrSrcHob.h @@ -0,0 +1,85 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _PREV_BOOT_ERR_SRC_HOB_H_ +#define _PREV_BOOT_ERR_SRC_HOB_H_ + +#define FSP_PREV_BOOT_ERR_SRC_HOB_GUID \ +{ 0xc5, 0xb5, 0x38, 0x51, 0x69, 0x93, 0xec, 0x48, 0x5b, 0x97, 0x38, 0xa2, 0xf7, 0x09, 0x66, 0x75 } + +#define PREV_BOOT_ERR_SRC_HOB_SIZE 1000 + +#pragma pack(1) + +typedef struct { +UINT16 Length; // Actual size of the error sources used in the HOB +UINT8 HobData[PREV_BOOT_ERR_SRC_HOB_SIZE -2]; // List of Error source structures of format //MCBANK_ERR_INFO or CSR_ERR_INFO +}PREV_BOOT_ERR_SRC_HOB; + +typedef struct{ +UINT8 Type; // McBankType = 1; +UINT8 Segment; +UINT8 Socket; +UINT16 ApicId; // ApicId is Needed only if it a core McBank. +UINT16 McBankNum; +UINT64 McBankStatus; +UINT64 McbankAddr; +UINT64 McBankMisc; +} MCBANK_ERR_INFO; + +typedef struct { +UINT8 Type; // PciExType =2 ; +UINT8 Segment; +UINT8 Bus; +UINT8 Device; +UINT8 Function; +UINT32 AerUncErrSts; +UINT8 AerHdrLogData[16]; +} PCI_EX_ERR_INFO; + +typedef struct { +UINT8 Type; // Other Csr error type =3 ; +UINT8 Segment; +UINT8 Bus; +UINT8 Device; +UINT8 Function; +UINT16 offset; +UINT32 Value; +} CSR_ERR_INFO; + +typedef enum { + McBankType = 1, + PciExType, + CsrOtherType +} ERROR_ACCESS_TYPE; + +#pragma pack() + +#endif //_PREV_BOOT_ERR_SRC_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/SystemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/SystemInfoHob.h new file mode 100644 index 0000000000..b6d88f5c30 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/graniterapids/sp/SystemInfoHob.h @@ -0,0 +1,283 @@ +/** @file + +Copyright (c) 2019-2023, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _SYSTEM_INFO_HOB_H_ +#define _SYSTEM_INFO_HOB_H_ + +#define SYSTEM_INFO_HOB_GUID { 0x7650A0F2, 0x0D91, 0x4B0C, { 0x92, 0x3B, 0xBD, 0xCF, 0x22, 0xD1, 0x64, 0x35 }} + +#ifndef MAX_SOCKET +#define MAX_SOCKET 4 +#endif + +#ifndef MAX_IIO_STACK +#define MAX_IIO_STACK 12 +#endif + +#define MAX_LOGIC_IIO_STACK 14 + +#ifndef MAX_IMC +#define MAX_IMC 4 // Maximum memory controllers per socket +#endif + +#ifndef MAX_MC_CH +#define MAX_MC_CH 2 // Max number of channels per MC (3 for EP) +#endif + +#ifndef MAX_CH +#define MAX_CH ((MAX_IMC)*(MAX_MC_CH)) // Max channels per socket (worst case EP * EX combination = 16) +#endif + +#define MAX_HPM_PFS_ENTRY_NUM 15 // Number of entries in PFS structure +#define HPM_PFS_ENTRY_SIZE 2 // Entry size of PFS structure in DWORD + +#pragma pack(1) + +#ifndef MMIO_BARS_ENUM +#define MMIO_BARS_ENUM +typedef enum { + TYPE_SCF_BAR = 0, + TYPE_PCU_BAR, + TYPE_MEM_BAR0, + TYPE_MEM_BAR1, + TYPE_MEM_BAR2, + TYPE_MEM_BAR3, + TYPE_MEM_BAR4, + TYPE_MEM_BAR5, + TYPE_MEM_BAR6, + TYPE_MEM_BAR7, + TYPE_SBREG_BAR, + TYPE_MAX_MMIO_BAR +} MMIO_BARS; +#endif + +typedef enum { + ReservedMemSs, + Ddr4MemSs = 1, + Ddr5MemSs = 2, + LpDdr4MemSs = 3, + LpDdr5MemSs = 4, + Hbm2MemSs = 5, + MrcMstMax, + MrcMstDelim = MAX_INT32 +} MRC_MST; + +typedef enum BootMode { + NormalBoot = 0, // Normal path through RC with full init, mem detection, init, training, etc. + // Some of these MRC specific init routines can be skipped based on MRC input params + // in addition to the sub-boot type (WarmBoot, WarmBootFast, etc). + S3Resume = 1 // S3 flow through RC. Should do the bare minimum required for S3 + // init and be optimized for speed. +} BootMode; + +// +// This is used to determine what type of die is connected to a UPI link +// +typedef enum { + UpiConnectionTypeCpu, + UpiConnectionTypePcieGen4, + UpiConnectionTypeFpga, + UpiConnectionTypeMax +} UPI_CONNECTION_TYPE; + +// +// VSEC info for HPM +// The HPM_INFO struct contains info collected from the VSEC structure for the HPM. +// VSEC Structure is defined as below: +// +// ------------------------VSEC Structure------------------------ +// | Next Cap Offset(12b) | Cap Version(4b) | PCIe Cap ID(16b) | +// -------------------------------------------------------------- +// | VSEC_LEN(12b) | VSEC_REV(4b) | VSEC_ID(16b) | +// -------------------------------------------------------------- +// | EntrySize(8b) | NumEntries(8b) | Rsvd(16b) | +// -------------------------------------------------------------- +// | Address(29b) | tBIR(3b) | +// -------------------------------------------------------------- +// +// +typedef struct { + UINT8 NumEntries; // The number of PM feature interface instances in this VSEC space + UINT8 EntrySize; // The entry size for each PM interface instance in 32-bit DWORDs + UINT32 Address; // The offset from the BAR register which is used for HPM to point to the base of the discovery entry. i.e. the PFS (PM Feature Structure) + UINT8 tBIR; // Which one of he function's BAR is used for the PFS offset +} HPM_INFO; + +// +//-------------------------------- - PFS Entry-------------------------------- +//| EntrySize(16b) | NumEntries(8b) | VSEC_SubID(8b) | +//---------------------------------------------------------------------------- +//| RSVD(14b) | Attr(2b) | CapOffset(16b) | +//---------------------------------------------------------------------------- +// +typedef struct { + UINT32 TpmiId : 8; + UINT32 NumEntries : 8; + UINT32 EntrySize : 16; + UINT32 CapOffset : 16; + UINT32 Attribute : 2; + UINT32 EntryBitMap : 8; + UINT32 Rsvd : 6; +} PFS_ENTRY; + +// +// HPM (Hierarchical Power Management) VSEC resource allocation info +// +typedef struct { + BOOLEAN HpmEnabled; // HPM enabled or not in BIOS knob + BOOLEAN HpmInfraReady; // All the HPM infrastructure data is buffered + UINT32 OobMsmHpmBarBase; // The base of OOBMSM BAR1 for HPM PFS and LUT tables + UINT32 OobMsmHpmBarLimit; // The limit of OOBMSM BAR1 from where the required size will be allocated + UINT32 OobMsmHpmBarMmcfgAddress; // The OOBMSM BAR1 MMCFG address + UINT32 OobMsmHpmBarRequiredSize; // The required size of OOBMSM BAR1 + + HPM_INFO HpmVsecInfo; // For now, single VSEC is assumed + PFS_ENTRY Pfs[MAX_HPM_PFS_ENTRY_NUM]; // The buffered PFS structure + +} HPM_VSEC_RESOURCE; + +// +// Stack id swap information, which includes stack swap flag and the new stack id swap array. +// +typedef struct { + BOOLEAN StackSwapFlag; + UINT8 StackIdSwapArray[MAX_IIO_STACK]; +} STACKID_SWAP_INFO; + +typedef struct { + UINT64 Cxl1p1RcrbBase; + BOOLEAN Cxl1p1RcrbValid; +} CXL_1P1_RCRB; + +typedef struct { + UINT32 StackPresentBitmap[MAX_SOCKET]; ///< bitmap of present stacks per socket + UINT8 StackBus[MAX_SOCKET][MAX_LOGIC_IIO_STACK];///< Bus of each stack + UINT32 StackMmiol[MAX_SOCKET][MAX_IIO_STACK]; ///< mmiol of each IIO stack, if it works as CXL, the mmiol base is RCRBBAR + UINT8 SocketFirstBus[MAX_SOCKET]; + UINT8 Socket10nmUboxBus0[MAX_SOCKET]; //10nm CPU use only + UINT8 TotIoDie[MAX_SOCKET]; //GNR & SRF CPU use only + UINT8 TotCmpDie[MAX_SOCKET]; //GNR & SRF CPU use only + UINT8 SocketLastBus[MAX_SOCKET]; + UINT8 segmentSocket[MAX_SOCKET]; + UINT8 KtiPortCnt; + UINT32 socketPresentBitMap; + UINT32 SecondaryNodeBitMap; + UINT32 FpgaPresentBitMap; + UINT32 mmCfgBase; + UINT64 SocketMmCfgBase[MAX_SOCKET]; + UINT8 DdrMaxCh; + UINT8 DdrMaxImc; ///< Logical number of IMC count, ignoring logical holes + UINT8 DdrPhysicalMaxImc; ///< Physical number of IMC count from Capid + UINT8 DdrNumChPerMc; + UINT8 DdrNumPseudoChPerCh; + UINT8 imcEnabled[MAX_SOCKET][MAX_IMC]; + UINT8 mcId[MAX_SOCKET][MAX_CH]; + MRC_MST MemSsType[MAX_SOCKET]; ///< MemSsType global identifier for DDR vs. HBM + UINT32 MmioBar[MAX_SOCKET][TYPE_MAX_MMIO_BAR]; + UINT8 HbmMaxCh; + UINT8 HbmMaxIoInst; + UINT8 HbmNumChPerMc; + UINT8 HbmNumChPerIo; + UINT32 LastCsrAddress[2]; + UINT32 LastCsrMmioAddr; + UINT8 CsrCachingEnable; + UINT32 LastCsrMcAddress[2]; + UINT32 LastCsrMcMmioPhyAddr; + UINT8 CsrPciBarCachingEnable; + UINT32 LastCsrPciBarAddr[2]; + UINT64 LastCsrPciBarPhyAddr; + UINT32 LastSBPortId[MAX_SOCKET]; + UPI_CONNECTION_TYPE UpiConnectionType[MAX_SOCKET]; + BOOLEAN PostedCsrAccessAllowed; // SW is allowed to use posted CSR writes method when TRUE + BOOLEAN PostedWritesEnabled; // All CSR writes use posted method when TRUE, non-posted when FALSE + BOOLEAN DataPopulated; // CPU_CSR_ACCESS_VAR is unavailable when FALSE + HPM_VSEC_RESOURCE SocketHpmVsecRes[MAX_SOCKET]; // HPM VSEC info for all sockets + BOOLEAN HbmSku; + UINT8 HcxType[MAX_SOCKET]; + STACKID_SWAP_INFO StackIdSwapInfo[MAX_SOCKET]; //StackID sync after do StackId swap,including Stack swap table and whether do stack swap + CXL_1P1_RCRB Cxl1p1Rcrb[MAX_SOCKET][MAX_IIO_STACK]; // CXL 1.1 RCRB, one per PI5 stack + UINT32 DmiRcrb[MAX_SOCKET]; // DMI RCRB region, one per socket + UINT8 FabricType; //Compute die 10x6, 10x5, and 6x5 type is stored + UINT8 ChopType; //Compute Die Chop Type + UINT8 MdfInstCount; +} CPU_CSR_ACCESS_VAR; + +typedef struct { + UINT32 MeRequestedSizeNv; + UINT32 MeRequestedAlignmentNv; + UINT8 SbspSocketIdNv; +} SYS_INFO_VAR_NVRAM; + +typedef struct _CPUID_REGISTER_INFO { + UINT32 Eax; + UINT32 Ebx; + UINT32 Ecx; + UINT32 Edx; +} CPUID_REGISTER_INFO; + +typedef struct _PROCESSOR_COMMON_INFO { + UINT32 capid0; + UINT32 capid1; + UINT32 capid2; + UINT32 capid3; + UINT32 capid4; + UINT32 capid5; + UINT32 capid6lo; + UINT32 capid6hi; + CPUID_REGISTER_INFO ExtCpuid7; + CPUID_REGISTER_INFO ExtCpuid1B; +} PROCESSOR_COMMON_INFO; + +typedef struct { + UINT32 MeRequestedSize; + UINT32 MeRequestedAlignment; + UINT32 CheckPoint; + UINT8 ResetRequired; + UINT8 Emulation; + BootMode SysBootMode; + CPU_CSR_ACCESS_VAR CpuCsrAccessVarHost; // Common resource for CsrAccessRoutines + UINT64 CpuFreq; + UINT8 SocketId; + SYS_INFO_VAR_NVRAM SysInfoVarNvram; + BOOLEAN UsraTraceControl; + UINT16 UsraTraceConfiguration; // Bit 7 6 5 4 3:0 + // Write, Modify, GetAddr, Long/Short, Trace 0x5 as signature + // Bit 15 14:11 10 9 8 + // DumpCpuCsrAccessVar, TBD, CSR, PCIE, Read + BOOLEAN CpuCsrAccessVarInfoDumped; + PROCESSOR_COMMON_INFO ProcessorCommonInfo[MAX_SOCKET]; + EFI_PHYSICAL_ADDRESS SocAddrMapData; + UINTN UsraPpiPtr; +} SYSTEM_INFO_VAR; + + +#pragma pack () + +#endif //#ifndef _SYSTEM_INFO_HOB_H_ |