diff options
6 files changed, 551 insertions, 1 deletions
diff --git a/src/mainboard/google/brya/variants/nova/Makefile.mk b/src/mainboard/google/brya/variants/nova/Makefile.mk new file mode 100644 index 0000000000..d38141ca24 --- /dev/null +++ b/src/mainboard/google/brya/variants/nova/Makefile.mk @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +bootblock-y += gpio.c + +romstage-y += gpio.c + +ramstage-y += gpio.c diff --git a/src/mainboard/google/brya/variants/nova/gpio.c b/src/mainboard/google/brya/variants/nova/gpio.c new file mode 100644 index 0000000000..6ed8823faa --- /dev/null +++ b/src/mainboard/google/brya/variants/nova/gpio.c @@ -0,0 +1,195 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> +#include <soc/gpio.h> + +/* Pad configuration in ramstage */ +static const struct pad_config override_gpio_table[] = { + /* A14 : USB_OC1# ==> NC */ + PAD_NC(GPP_A14, NONE), + /* A15 : USB_OC2# ==> NC */ + PAD_NC(GPP_A15, NONE), + /* A19 : DDSP_HPD1 ==> NC */ + PAD_NC(GPP_A19, NONE), + /* A20 : DDSP_HPD2 ==> NC */ + PAD_NC(GPP_A20, NONE), + /* A21 : DDPC_CTRCLK ==> NC */ + PAD_NC(GPP_A21, NONE), + /* A22 : DDPC_CTRLDATA ==> NC */ + PAD_NC(GPP_A22, NONE), + + /* B7 : ISH_12C1_SDA ==> PCH_I2C_MISCB_SDA */ + PAD_CFG_NF_LOCK(GPP_B7, NONE, NF2, LOCK_CONFIG), + /* B8 : ISH_I2C1_SCL ==> PCH_I2C_MISCB_SCL */ + PAD_CFG_NF_LOCK(GPP_B8, NONE, NF2, LOCK_CONFIG), + /* B15 : TIME_SYNC0 ==> HP_INT_L */ + PAD_CFG_GPI_INT(GPP_B15, NONE, PLTRST, EDGE_BOTH), + /* B16 : I2C5_SDA ==> PCH_I2C_TPU_SDA */ + PAD_CFG_NF_LOCK(GPP_B16, NONE, NF2, LOCK_CONFIG), + /* B17 : I2C5_SCL ==> PCH_I2C_TPU_SCL */ + PAD_CFG_NF_LOCK(GPP_B17, NONE, NF2, LOCK_CONFIG), + + /* C0 : SMBCLK ==> NC */ + PAD_NC(GPP_C0, NONE), + /* C1 : SMBDATA ==> NC */ + PAD_NC(GPP_C1, NONE), + /* C3 : SML0CLK ==> NC */ + PAD_NC(GPP_C3, NONE), + /* C4 : SML0DATA ==> SMBUS_ISP_SCALAR */ + PAD_CFG_GPO(GPP_C4, 0, DEEP), + + /* D0 : ISH_GP0 ==> BOOT_SEL_N */ + PAD_NC(GPP_D0, NONE), + /* D1 : ISH_GP1 ==> REC_MODE */ + PAD_NC(GPP_D1, NONE), + /* D2 : ISH_GP2 ==> DEV_MODE_CTRL */ + PAD_NC(GPP_D2, NONE), + /* D3 : ISH_GP3 ==> BOOT_IND */ + PAD_NC(GPP_D3, NONE), + /* D9 : ISH_SPI_CS# ==> NC */ + PAD_NC_LOCK(GPP_D9, NONE, LOCK_CONFIG), + /* D10 : ISH_SPI_CLK ==> GPP_D10_STRAP */ + PAD_CFG_GPI_LOCK(GPP_D10, NONE, LOCK_CONFIG), + /* D13 : ISH_UART0_RXD ==> NC */ + PAD_NC_LOCK(GPP_D13, NONE, LOCK_CONFIG), + /* D15 : ISH_UART0_RTS# ==> USI_RST_L */ + PAD_CFG_GPO(GPP_D15, 1, DEEP), + /* D16 : ISH_UART0_CTS# ==> USI_INT */ + PAD_CFG_GPI_IRQ_WAKE(GPP_D16, NONE, PLTRST, LEVEL, INVERT), + /* D17 : UART1_RXD ==> PCH_RX_TSUM_UART_TX */ + PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1), + /* D18 : UART1_TXD ==> PCH_TX_TSUM_UART_RX */ + PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1), + + /* E4 : SATA_DEVSLP0 ==> M2_SSD_PE_WAKE_ODL */ + PAD_CFG_GPI_LOCK(GPP_E4, NONE, LOCK_CONFIG), + /* E5 : SATA_DEVSLP1 ==> M2_SSD_DEVSLP_OD */ + PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), + /* E9 : USB_OC0# ==> USB_C0_OC_ODL */ + PAD_NC_LOCK(GPP_E9, NONE, LOCK_CONFIG), + /* E18 : DDP1_CTRLCLK ==> NC */ + PAD_NC(GPP_E18, NONE), + /* E19 : DDP1_CTRLDATA ==> GPP_E19_STRAP */ + PAD_CFG_GPI_LOCK(GPP_E19, NONE, LOCK_CONFIG), + /* E20 : DDP2_CTRLCLK ==> NC */ + PAD_NC(GPP_E20, NONE), + /* E21 : DDP2_CTRLDATA ==> GPP_E21_STRAP */ + PAD_CFG_GPI_LOCK(GPP_E21, NONE, LOCK_CONFIG), + + /* F11 : THC1_SPI2_CLK ==> MEM_CH_SEL */ + PAD_CFG_GPI_LOCK(GPP_F11, NONE, LOCK_CONFIG), + /* F12 : GSXDOUT ==> MEM_STRAP_1 */ + PAD_CFG_GPI_LOCK(GPP_F12, NONE, LOCK_CONFIG), + /* F13 : GSXDOUT ==> MEM_STRAP_2 */ + PAD_CFG_GPI_LOCK(GPP_F13, NONE, LOCK_CONFIG), + /* F15 : GSXSRESET# ==> MEM_STRAP_3 */ + PAD_CFG_GPI_LOCK(GPP_F15, NONE, LOCK_CONFIG), + /* F16 : GSXCLK ==> MEM_STRAP_0 */ + PAD_CFG_GPI_LOCK(GPP_F16, NONE, LOCK_CONFIG), + + /* H12 : I2C7_SDA ==> NC */ + PAD_NC_LOCK(GPP_H12, NONE, LOCK_CONFIG), + /* H13 : I2C7_SCL ==> NC */ + PAD_NC_LOCK(GPP_H13, NONE, LOCK_CONFIG), + /* H15 : DDPB_CTRLCLK ==> NC */ + PAD_NC(GPP_H15, NONE), + /* H17 : DDPB_CTRLDATA ==> NC */ + PAD_NC(GPP_H17, NONE), + /* H19 : SRCCLKREQ4# ==> M2_TPU1_CLKREQ_ODL */ + PAD_CFG_NF(GPP_H19, NONE, DEEP, NF1), + + /* R0 : HDA_BCLK ==> NC */ + PAD_NC_LOCK(GPP_R0, NONE, LOCK_CONFIG), + /* R1 : HDA_SYNC ==> I2S_PCH_TX_HP_RX_STRAP */ + PAD_CFG_GPI_LOCK(GPP_R1, NONE, LOCK_CONFIG), + /* R2 : HDA_SDO ==> NC */ + PAD_NC(GPP_R2, NONE), + /* R3 : HDA_SDIO ==> NC */ + PAD_NC(GPP_R3, NONE), + /* R4 : HDA_RST# ==> NC */ + PAD_NC(GPP_R4, NONE), + /* R5 : HDA_SDI1 ==> NC */ + PAD_NC(GPP_R5, NONE), + /* R6 : I2S2_TXD ==> NC */ + PAD_NC(GPP_R6, NONE), + /* R7 : I2S2_RXD ==> NC */ + PAD_NC(GPP_R7, NONE), + + /* S0 : SNDW0_CLK ==> PCH_I2S_SCLK_MX8M */ + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), + /* S1 : SNDW0_DATA ==> PCH_I2S_SFRM_MX8M */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), + /* S2 : SNDW1_CLK ==> PCH_I2S_TX_MX8M_RX */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), + /* S3 : SNDW1_DATA ==> PCH_I2S_RX_MX8M_TX */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 0, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP), + /* F14 : GSXDIN ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_F14, 1, DEEP), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F18, NONE, DEEP), + /* H6 : I2C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : I2C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + + /* CPU PCIe VGPIO for PEG60 */ + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_48, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_49, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_50, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_51, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_52, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_53, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_54, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_55, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_56, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_57, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_58, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_59, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_60, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_61, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_62, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_63, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_76, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_77, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_78, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_79, NONE, PLTRST, NF1), +}; + +static const struct pad_config romstage_gpio_table[] = { + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 1, DEEP), +}; + +const struct pad_config *variant_gpio_override_table(size_t *num) +{ + *num = ARRAY_SIZE(override_gpio_table); + return override_gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +const struct pad_config *variant_romstage_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(romstage_gpio_table); + return romstage_gpio_table; +} diff --git a/src/mainboard/google/brya/variants/nova/memory/Makefile.mk b/src/mainboard/google/brya/variants/nova/memory/Makefile.mk new file mode 100644 index 0000000000..bb0957dfe2 --- /dev/null +++ b/src/mainboard/google/brya/variants/nova/memory/Makefile.mk @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# This is an auto-generated file. Do not edit!! +# Generated by: +# util/spd_tools/bin/part_id_gen CZN lp4x src/mainboard/google/brya/variants/nova/memory src/mainboard/google/brya/variants/nova/memory/mem_parts_used.txt + +SPD_SOURCES = +SPD_SOURCES += spd/lp4x/set-1/spd-1.hex # ID = 0(0b0000) Parts = K4U6E3S4AB-MGCL, H9HCNNNBKMMLXR-NEE +SPD_SOURCES += spd/lp4x/set-1/spd-3.hex # ID = 1(0b0001) Parts = MT53E1G32D2NP-046 WT:B, K4UBE3D4AB-MGCL diff --git a/src/mainboard/google/brya/variants/nova/memory/dram_id.generated.txt b/src/mainboard/google/brya/variants/nova/memory/dram_id.generated.txt new file mode 100644 index 0000000000..e2089db069 --- /dev/null +++ b/src/mainboard/google/brya/variants/nova/memory/dram_id.generated.txt @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# This is an auto-generated file. Do not edit!! +# Generated by: +# util/spd_tools/bin/part_id_gen CZN lp4x src/mainboard/google/brya/variants/nova/memory src/mainboard/google/brya/variants/nova/memory/mem_parts_used.txt + +DRAM Part Name ID to assign +K4U6E3S4AB-MGCL 0 (0000) +H9HCNNNBKMMLXR-NEE 0 (0000) +MT53E1G32D2NP-046 WT:B 1 (0001) +K4UBE3D4AB-MGCL 1 (0001) diff --git a/src/mainboard/google/brya/variants/nova/memory/mem_parts_used.txt b/src/mainboard/google/brya/variants/nova/memory/mem_parts_used.txt new file mode 100644 index 0000000000..10f244d15b --- /dev/null +++ b/src/mainboard/google/brya/variants/nova/memory/mem_parts_used.txt @@ -0,0 +1,4 @@ +K4U6E3S4AB-MGCL +H9HCNNNBKMMLXR-NEE +MT53E1G32D2NP-046 WT:B +K4UBE3D4AB-MGCL diff --git a/src/mainboard/google/brya/variants/nova/overridetree.cb b/src/mainboard/google/brya/variants/nova/overridetree.cb index 4f2c04a57a..93018ea074 100644 --- a/src/mainboard/google/brya/variants/nova/overridetree.cb +++ b/src/mainboard/google/brya/variants/nova/overridetree.cb @@ -1,6 +1,333 @@ chip soc/intel/alderlake + register "domain_vr_config[VR_DOMAIN_IA]" = "{ + .enable_fast_vmode = 1, + }" - device domain 0 on + register "sagv" = "SaGv_Enabled" + + register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2 Port 1 + register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Disable USB2 Port 4 + register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Disable USB2 Port 5 + register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Disable USB2 Port 6 + register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Disable USB2 Port 7 + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Disable USB2 Port 8 + + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x2B, + .tx_downscale_amp = 0x00, + }" # Type-A port A2 + register "usb3_ports[1]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x2B, + .tx_downscale_amp = 0x00, + }" # Type-A port A3 + + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Disable Type-A port + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Disable Type-A port + + register "serial_io_i2c_mode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + register "serial_io_gspi_mode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI1] = PchSerialIoDisabled, + }" + + register "serial_io_uart_mode" = "{ + [PchSerialIoIndexUART0] = PchSerialIoPci, + [PchSerialIoIndexUART1] = PchSerialIoSkipInit, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + register "ddi_ports_config" = "{ + [DDI_PORT_A] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, + [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, + }" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Scaler | + #| I2C1 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C2 | HDMI_A | + #| I2C3 | Touchscreen | + #| I2C5 | TPU | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[1] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 600, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + }, + }" + + device domain 0 on + device ref dtt on + chip drivers/intel/dptf + ## sensor information + register "options.tsr[0].desc" = ""DRAM"" + register "options.tsr[1].desc" = ""Charger"" + + # TODO: below values are initial reference values only + ## Active Policy + register "policies.active" = "{ + [0] = { + .target = DPTF_CPU, + .thresholds = { + TEMP_PCT(85, 90), + TEMP_PCT(80, 80), + TEMP_PCT(75, 70), + } + } + }" + + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000), + [2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 5000), + }" + + ## Critical Policy + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN), + }" + + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 3000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 55000, + .max_power = 55000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 1700 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf" = "{ + [0] = { 90, 6700, 220, 2200, }, + [1] = { 80, 5800, 180, 1800, }, + [2] = { 70, 5000, 145, 1450, }, + [3] = { 60, 4900, 115, 1150, }, + [4] = { 50, 3838, 90, 900, }, + [5] = { 40, 2904, 55, 550, }, + [6] = { 30, 2337, 30, 300, }, + [7] = { 20, 1608, 15, 150, }, + [8] = { 10, 800, 10, 100, }, + [9] = { 0, 0, 0, 50, } + }" + + ## Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 alias dptf_policy on end + end + end + device ref pcie4_0 on + # Enable CPU PCIE RP 1 using CLK 0 + register "cpu_pcie_rp[CPU_RP(1)]" = "{ + .clk_req = 0, + .clk_src = 0, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port1 as dfp[0].typec_port + device generic 0 on end + end + end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end + device ref i2c0 on end # Scaler + device ref i2c1 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)" + device i2c 50 on end + end + end #TPM + device ref i2c2 on end # HDMI_A + device ref i2c3 on + chip drivers/i2c/hid + register "generic.hid" = ""ILTK0001"" + register "generic.desc" = ""ILITEK Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D16_IRQ)" + register "generic.detect" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" + register "generic.reset_delay_ms" = "200" + register "generic.enable_delay_ms" = "12" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 41 on end + end + end # Touch screen + device ref i2c5 on end # TPU + device ref pcie_rp6 on + # Enable PCIE 6 using clk 3 + register "pch_pcie_rp[PCH_RP(6)]" = "{ + .clk_src = 3, + .clk_req = 3, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end #TPU0 + device ref pcie_rp7 on + # Enable PCIE 7 using clk 6 + register "pch_pcie_rp[PCH_RP(7)]" = "{ + .clk_src = 6, + .clk_req = 6, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW0_07" # GPP_A7 + register "device_index" = "0" + register "enable_aspm_l1_2" = "1" + device pci 00.0 on end + end + end # RTL8111H Ethernet NIC + device ref pcie_rp8 on + # Enable PCIE 8 using clk 4 + register "pch_pcie_rp[PCH_RP(8)]" = "{ + .clk_src = 4, + .clk_req = 4, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end #TPU1 + device ref uart0 on end + device ref uart1 on end + device ref gspi0 off end + device ref gspi1 off end + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + use usb2_port1 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 0 alias conn0 on end + end + end + end + end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(1, 0))" + device ref tcss_usb3_port1 on end + end + end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(1, 0))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A3 (MLB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(0, 1))" + device ref usb2_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A2 (MLB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(0, 0))" + device ref usb2_port4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A2 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(0, 0))" + device ref usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A3 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(0, 1))" + device ref usb3_port2 on end + end + end + end + end end end |