diff options
| -rw-r--r-- | src/mainboard/google/brya/variants/brya0/overridetree.cb | 85 |
1 files changed, 80 insertions, 5 deletions
diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb index 20d43ca9a5..f0b6c694c0 100644 --- a/src/mainboard/google/brya/variants/brya0/overridetree.cb +++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb @@ -549,7 +549,9 @@ chip soc/intel/alderlake register "link_freq[1]" = "180 * MHz" # 180 MHz register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "has_power_resource" = "1" + #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -583,9 +585,23 @@ chip soc/intel/alderlake register "chip_name" = ""DW9768 VCM"" register "device_type" = "INTEL_ACPI_CAMERA_VCM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "vcm_compat" = ""dongwoon,dw9768"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 0C on probe WFC WFC_MIPI_OVTI8856 end @@ -596,7 +612,6 @@ chip soc/intel/alderlake register "chip_name" = ""AT24 EEPROM"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "nvm_compat" = ""atmel,24c1024"" register "nvm_size" = "0x2800" @@ -604,6 +619,21 @@ chip soc/intel/alderlake register "nvm_readonly" = "0x01" register "nvm_width" = "0x10" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 58 on probe WFC WFC_MIPI_OVTI8856 end @@ -624,6 +654,8 @@ chip soc/intel/alderlake register "link_freq[1]" = "180 * MHz" # 180 MHz register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + register "has_power_resource" = "1" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" @@ -658,9 +690,23 @@ chip soc/intel/alderlake register "chip_name" = ""DW AF DAC"" register "device_type" = "INTEL_ACPI_CAMERA_VCM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "vcm_compat" = ""dongwoon,dw9714"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 0C on probe WFC WFC_MIPI_KBAE350 end @@ -671,7 +717,6 @@ chip soc/intel/alderlake register "chip_name" = ""GT24C08"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" register "nvm_compat" = ""atmel,24c08"" register "nvm_size" = "0x2000" @@ -679,6 +724,21 @@ chip soc/intel/alderlake register "nvm_readonly" = "0x01" register "nvm_width" = "0x10" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 50 on probe WFC WFC_MIPI_KBAE350 end @@ -801,6 +861,7 @@ chip soc/intel/alderlake register "link_freq[0]" = "384 * MHz" # 384 MHz register "link_freq[1]" = "96 * MHz" # 96 MHz register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "has_power_resource" = "1" #Controls @@ -835,7 +896,6 @@ chip soc/intel/alderlake register "chip_name" = ""GT24C16S"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "pr0" = ""\\_SB.PCI0.I2C2.CAM1.PRIC"" register "nvm_compat" = ""atmel,24c1024"" register "nvm_size" = "0x800" @@ -843,6 +903,21 @@ chip soc/intel/alderlake register "nvm_readonly" = "0x01" register "nvm_width" = "0x08" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 50 on probe UFC UFC_MIPI_IMX208 end |