diff options
6 files changed, 24 insertions, 24 deletions
diff --git a/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb index cc6664cd74..3b9acea22b 100644 --- a/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb @@ -11,8 +11,8 @@ chip soc/intel/alderlake # EC memory map range is 0x900-0x9ff register "gen3_dec" = "0x00fc0901" - # S0ix enable - register "s0ix_enable" = "1" + # S0ix enable + register "s0ix_enable" = "1" # DPTF enable register "dptf_enable" = "1" diff --git a/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb index 52651090f7..6f55770d2b 100644 --- a/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb @@ -13,8 +13,8 @@ chip soc/intel/alderlake # EC memory map range is 0x900-0x9ff register "gen3_dec" = "0x00fc0901" - # S0ix enable - register "s0ix_enable" = "1" + # S0ix enable + register "s0ix_enable" = "1" # DPTF enable register "dptf_enable" = "1" @@ -85,33 +85,33 @@ chip soc/intel/alderlake .i2c[0] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 650, - .fall_time_ns = 400, - .data_hold_time_ns = 50, + .fall_time_ns = 400, + .data_hold_time_ns = 50, }, .i2c[1] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 650, - .fall_time_ns = 400, - .data_hold_time_ns = 50, + .fall_time_ns = 400, + .data_hold_time_ns = 50, }, .i2c[2] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 900, - .fall_time_ns = 400, - .data_hold_time_ns = 50, + .fall_time_ns = 400, + .data_hold_time_ns = 50, }, .i2c[3] = { .early_init = 1, .speed = I2C_SPEED_FAST, .rise_time_ns = 600, - .fall_time_ns = 400, - .data_hold_time_ns = 50, + .fall_time_ns = 400, + .data_hold_time_ns = 50, }, .i2c[5] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 650, - .fall_time_ns = 400, - .data_hold_time_ns = 50, + .fall_time_ns = 400, + .data_hold_time_ns = 50, }, }" diff --git a/src/mainboard/google/brya/variants/brask/overridetree.cb b/src/mainboard/google/brya/variants/brask/overridetree.cb index 4f2c04a57a..e707a9b6b9 100644 --- a/src/mainboard/google/brya/variants/brask/overridetree.cb +++ b/src/mainboard/google/brya/variants/brask/overridetree.cb @@ -1,6 +1,6 @@ chip soc/intel/alderlake - device domain 0 on - end + device domain 0 on + end end diff --git a/src/mainboard/google/brya/variants/kano/overridetree.cb b/src/mainboard/google/brya/variants/kano/overridetree.cb index 8100094e27..ac565cce2c 100644 --- a/src/mainboard/google/brya/variants/kano/overridetree.cb +++ b/src/mainboard/google/brya/variants/kano/overridetree.cb @@ -23,7 +23,7 @@ chip soc/intel/alderlake #| I2C5 | Trackpad | #+-------------------+---------------------------+ - device domain 0 on + device domain 0 on device ref dtt on chip drivers/intel/dptf ## sensor information diff --git a/src/mainboard/google/brya/variants/primus/overridetree.cb b/src/mainboard/google/brya/variants/primus/overridetree.cb index ec9283ee14..8f4549534d 100644 --- a/src/mainboard/google/brya/variants/primus/overridetree.cb +++ b/src/mainboard/google/brya/variants/primus/overridetree.cb @@ -134,7 +134,7 @@ chip soc/intel/alderlake device ref tcss_dma1 on chip drivers/intel/usb4/retimer register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" - use tcss_usb3_port3 as dfp[0].typec_port + use tcss_usb3_port3 as dfp[0].typec_port device generic 0 on end end end diff --git a/src/mainboard/google/brya/variants/redrix/overridetree.cb b/src/mainboard/google/brya/variants/redrix/overridetree.cb index 6dae77ab48..450cef8fff 100644 --- a/src/mainboard/google/brya/variants/redrix/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix/overridetree.cb @@ -14,7 +14,7 @@ fw_config field DB_LTE 6 7 option LTE_ABSENT 0 option LTE_USB 1 - option LTE_PCIE 2 + option LTE_PCIE 2 end end chip soc/intel/alderlake @@ -124,7 +124,7 @@ chip soc/intel/alderlake end end device ref ipu on - chip drivers/intel/mipi_camera + chip drivers/intel/mipi_camera register "acpi_uid" = "0x50000" register "acpi_name" = ""IPU0"" register "device_type" = "INTEL_ACPI_CAMERA_CIO2" @@ -258,7 +258,7 @@ chip soc/intel/alderlake register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #EN_UCAM_PWR register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset - #_ON + #_ON register "on_seq.ops_cnt" = "5" register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" @@ -272,7 +272,7 @@ chip soc/intel/alderlake register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - device i2c 36 on end + device i2c 36 on end end chip drivers/intel/mipi_camera register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" @@ -289,8 +289,8 @@ chip soc/intel/alderlake register "nvm_width" = "0x10" register "nvm_compat" = ""atmel,24c64"" - device i2c 50 on end - end + device i2c 50 on end + end end device ref i2c5 on |