diff options
| -rw-r--r-- | src/mainboard/google/hatch/variants/akemi/overridetree.cb | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/src/mainboard/google/hatch/variants/akemi/overridetree.cb b/src/mainboard/google/hatch/variants/akemi/overridetree.cb index 51395f9f5c..da669e4536 100644 --- a/src/mainboard/google/hatch/variants/akemi/overridetree.cb +++ b/src/mainboard/google/hatch/variants/akemi/overridetree.cb @@ -17,6 +17,24 @@ chip soc/intel/cannonlake [PchSerialIoIndexUART2] = PchSerialIoDisabled, }" + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 0 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 1 + register "usb2_ports[2]" = "USB2_PORT_SHORT(OC3)" # Type-A Port 0 + register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Unused + register "usb2_ports[4]" = "USB2_PORT_EMPTY" + register "usb2_ports[5]" = "USB2_PORT_EMPTY" # WWAN + register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # Camera + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 0 + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Unused + register "usb3_ports[4]" = "USB3_PORT_EMPTY" # WWAN + register "usb3_ports[5]" = "USB3_PORT_EMPTY" + # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -59,6 +77,94 @@ chip soc/intel/cannonlake register "ScsEmmcHs400Enabled" = "1" device domain 0 on + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Left Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-C Port 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.2 on end + end + chip drivers/usb/acpi + # No Type-A Port 1 + device usb 2.3 off end + end + chip drivers/usb/acpi + # Unused + device usb 2.4 off end + end + chip drivers/usb/acpi + # No WWAN + device usb 2.5 off end + end + chip drivers/usb/acpi + register "desc" = ""Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.6 on end + end + chip drivers/usb/acpi + # Unused + device usb 2.7 off end + end + chip drivers/usb/acpi + # Unused + device usb 2.8 off end + end + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" + device usb 2.9 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-C Port 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + # No Type-A Port 1 + device usb 3.3 off end + end + chip drivers/usb/acpi + # No WWAN + device usb 3.4 off end + end + chip drivers/usb/acpi + # Unused + device usb 3.5 off end + end + end + end + end # USB xHCI device pci 15.0 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" |