diff options
4 files changed, 52 insertions, 9 deletions
diff --git a/Documentation/mainboard/supermicro/x11-lga1151-series/x11-lga1151-series.md b/Documentation/mainboard/supermicro/x11-lga1151-series/x11-lga1151-series.md index 6a613e77d1..8c99527319 100644 --- a/Documentation/mainboard/supermicro/x11-lga1151-series/x11-lga1151-series.md +++ b/Documentation/mainboard/supermicro/x11-lga1151-series/x11-lga1151-series.md @@ -29,7 +29,6 @@ Look at the [flashing tutorial] and the board-specific section. These issues apply to all boards. Have a look at the board-specific issues, too. -- Intel SGX causes secondary APs to crash (disabled for now) when HT is enabled (Fix is WIP CB:35312) - TianoCore doesn't work with Aspeed NGI, as it's text mode only (Fix is WIP CB:35726) ## ToDo diff --git a/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb b/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb index a5ff0c5df0..ee6aac7e17 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb @@ -17,8 +17,8 @@ chip soc/intel/skylake register "Device4Enable" = "1" register "SaGv" = "SaGv_Disabled" - # Disable SGX - register "sgx_enable" = "0" # SGX is broken in coreboot + # Enable SGX + register "sgx_enable" = "1" register "PrmrrSize" = "128 * MiB" register "pirqa_routing" = "PCH_IRQ11" diff --git a/src/soc/intel/common/block/sgx/Kconfig b/src/soc/intel/common/block/sgx/Kconfig index 0852bfbf49..ffd501a7e2 100644 --- a/src/soc/intel/common/block/sgx/Kconfig +++ b/src/soc/intel/common/block/sgx/Kconfig @@ -1,5 +1,7 @@ config SOC_INTEL_COMMON_BLOCK_SGX bool + select CPU_INTEL_COMMON + select CPU_INTEL_COMMON_HYPERTHREADING default n help Software Guard eXtension(SGX) Feature. Intel SGX is a set of new CPU diff --git a/src/soc/intel/common/block/sgx/sgx.c b/src/soc/intel/common/block/sgx/sgx.c index 0edf50f09b..377a71994f 100644 --- a/src/soc/intel/common/block/sgx/sgx.c +++ b/src/soc/intel/common/block/sgx/sgx.c @@ -17,6 +17,7 @@ #include <cpu/x86/msr.h> #include <cpu/x86/mtrr.h> #include <cpu/intel/microcode.h> +#include <cpu/intel/common/common.h> #include <intelblocks/mp_init.h> #include <intelblocks/msr.h> #include <intelblocks/sgx.h> @@ -54,9 +55,18 @@ void prmrr_core_configure(void) } prmrr_base, prmrr_mask; msr_t msr; - if (!is_sgx_supported()) + /* + * Software Developer's Manual Volume 4: + * Order Number: 335592-068US + * Chapter 2.16.1 + * MSR_PRMRR_PHYS_MASK is in scope "Core" + * MSR_PRMRR_PHYS_BASE is in scope "Core" + * Return if Hyper-Threading is enabled and not thread 0 + */ + if (!is_sgx_supported() || intel_ht_sibling()) return; + /* PRMRR_PHYS_MASK is in scope "Core" */ msr = rdmsr(MSR_PRMRR_PHYS_MASK); /* If it is locked don't attempt to write PRMRR MSRs. */ if (msr.lo & PRMRR_PHYS_MASK_LOCK) @@ -109,6 +119,12 @@ static void enable_sgx(void) { msr_t msr; + /* + * Intel 64 and IA-32 ArchitecturesSoftware Developer's ManualVolume 3C + * Order Number: 326019-060US + * Chapter 35.10.2 "Additional MSRs Supported by Intel" + * IA32_FEATURE_CONTROL is in scope "Thread" + */ msr = rdmsr(IA32_FEATURE_CONTROL); /* Only enable it when it is not locked */ if ((msr.lo & FEATURE_CONTROL_LOCK_BIT) == 0) { @@ -121,6 +137,12 @@ static void lock_sgx(void) { msr_t msr; + /* + * Intel 64 and IA-32 ArchitecturesSoftware Developer's ManualVolume 3C + * Order Number: 326019-060US + * Chapter 35.10.2 "Additional MSRs Supported by Intel" + * IA32_FEATURE_CONTROL is in scope "Thread" + */ msr = rdmsr(IA32_FEATURE_CONTROL); /* If it is locked don't attempt to lock it again. */ if ((msr.lo & 1) == 0) { @@ -135,6 +157,7 @@ static int owner_epoch_update(void) * for PoC just write '0's to the MSRs. */ msr_t msr = {0, 0}; + /* SGX_OWNEREPOCH is in scope "Package" */ wrmsr(MSR_SGX_OWNEREPOCH0, msr); wrmsr(MSR_SGX_OWNEREPOCH1, msr); return 0; @@ -175,16 +198,19 @@ static int is_prmrr_approved(void) return 0; } +/* + * Configures SGX according to "Intel Software Guard Extensions Technology" + * Document Number: 565432 + */ void sgx_configure(void *unused) { - const void *microcode_patch = intel_mp_current_microcode(); if (!is_sgx_supported() || !is_prmrr_set()) { printk(BIOS_ERR, "SGX: pre-conditions not met\n"); return; } - /* Enable the SGX feature */ + /* Enable the SGX feature on all threads. */ enable_sgx(); /* Update the owner epoch value */ @@ -194,10 +220,26 @@ void sgx_configure(void *unused) /* Ensure to lock memory before reload microcode patch */ cpu_lock_sgx_memory(); - /* Reload the microcode patch */ - intel_microcode_load_unlocked(microcode_patch); + /* + * Update just on the first CPU in the core. Other siblings + * get the update automatically according to Document: 253668-060US + * Intel SDM Chapter 9.11.6.3 + * "Update in a System Supporting Intel Hyper-Threading Technology" + * Intel Hyper-Threading Technology has implications on the loading of the + * microcode update. The update must be loaded for each core in a physical + * processor. Thus, for a processor supporting Intel Hyper-Threading + * Technology, only one logical processor per core is required to load the + * microcode update. Each individual logical processor can independently + * load the update. However, MP initialization must provide some mechanism + * (e.g. a software semaphore) to force serialization of microcode update + * loads and to prevent simultaneous load attempts to the same core. + */ + if (!intel_ht_sibling()) { + const void *microcode_patch = intel_mp_current_microcode(); + intel_microcode_load_unlocked(microcode_patch); + } - /* Lock the SGX feature */ + /* Lock the SGX feature on all threads. */ lock_sgx(); /* Activate the SGX feature, if PRMRR config was approved by MCHECK */ |