diff options
6 files changed, 8433 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FirmwareVersionInfoHob.h new file mode 100644 index 0000000000..57194fab92 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FirmwareVersionInfoHob.h @@ -0,0 +1,68 @@ +/** @file
+ Header file for Firmware Version Information
+
+ @copyright
+ Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License which accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _FIRMWARE_VERSION_INFO_HOB_H_
+#define _FIRMWARE_VERSION_INFO_HOB_H_
+
+#include <Uefi/UefiMultiPhase.h>
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#pragma pack(1)
+///
+/// Firmware Version Structure
+///
+typedef struct {
+ UINT8 MajorVersion;
+ UINT8 MinorVersion;
+ UINT8 Revision;
+ UINT16 BuildNumber;
+} FIRMWARE_VERSION;
+
+///
+/// Firmware Version Information Structure
+///
+typedef struct {
+ UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name
+ UINT8 VersionStringIndex; ///< Offset 1 Index of Version String
+ FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version
+} FIRMWARE_VERSION_INFO;
+
+#ifndef __SMBIOS_STANDARD_H__
+///
+/// The Smbios structure header.
+///
+typedef struct {
+ UINT8 Type;
+ UINT8 Length;
+ UINT16 Handle;
+} SMBIOS_STRUCTURE;
+#endif
+
+///
+/// Firmware Version Information HOB Structure
+///
+typedef struct {
+ EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB
+ SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB
+ UINT8 Count; ///< Offset 28 Number of FVI elements included.
+///
+/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer
+///
+} FIRMWARE_VERSION_INFO_HOB;
+#pragma pack()
+
+#endif // _FIRMWARE_VERSION_INFO_HOB_H_
diff --git a/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspUpd.h new file mode 100644 index 0000000000..e6fe83622a --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspUpd.h @@ -0,0 +1,48 @@ +/** @file
+
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPUPD_H__
+#define __FSPUPD_H__
+
+#include <FspEas.h>
+
+#pragma pack(1)
+
+#define FSPT_UPD_SIGNATURE 0x545F4450554C4845 /* 'EHLUPD_T' */
+
+#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4845 /* 'EHLUPD_M' */
+
+#define FSPS_UPD_SIGNATURE 0x535F4450554C4845 /* 'EHLUPD_S' */
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspmUpd.h new file mode 100644 index 0000000000..c9fe5dbe0b --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspmUpd.h @@ -0,0 +1,3026 @@ +/** @file
+
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPMUPD_H__
+#define __FSPMUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+#include <MemInfoHob.h>
+
+///
+/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
+///
+typedef struct {
+ UINT8 Revision; ///< Chipset Init Info Revision
+ UINT8 Rsvd[3]; ///< Reserved
+ UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
+ UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
+} CHIPSET_INIT_INFO;
+
+
+/** Fsp M Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - Platform Reserved Memory Size
+ The minimum platform memory size required to pass control into DXE
+**/
+ UINT64 PlatformMemorySize;
+
+/** Offset 0x0048 - SPD Data Length
+ Length of SPD Data
+ 0x100:256 Bytes, 0x200:512 Bytes
+**/
+ UINT16 MemorySpdDataLen;
+
+/** Offset 0x004A - Enable above 4GB MMIO resource support
+ Enable/disable above 4GB MMIO resource support
+ $EN_DIS
+**/
+ UINT8 EnableAbove4GBMmio;
+
+/** Offset 0x004B - Enable/Disable CrashLog Device 10
+ Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogDevice;
+
+/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr00;
+
+/** Offset 0x0050 - Memory SPD Pointer Channel 0 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr01;
+
+/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr10;
+
+/** Offset 0x0058 - Memory SPD Pointer Channel 1 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr11;
+
+/** Offset 0x005C - Dq Byte Map CH0
+ Dq byte mapping between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqByteMapCh0[12];
+
+/** Offset 0x0068 - Dq Byte Map CH1
+ Dq byte mapping between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqByteMapCh1[12];
+
+/** Offset 0x0074 - Dqs Map CPU to DRAM CH 0
+ Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqsMapCpu2DramCh0[8];
+
+/** Offset 0x007C - Dqs Map CPU to DRAM CH 1
+ Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqsMapCpu2DramCh1[8];
+
+/** Offset 0x0084 - RcompResister settings
+ Indicates RcompReister settings: Board-dependent
+**/
+ UINT16 RcompResistor[3];
+
+/** Offset 0x008A - RcompTarget settings
+ RcompTarget settings: board-dependent
+**/
+ UINT16 RcompTarget[5];
+
+/** Offset 0x0094 - VREF_CA
+ CA Vref routing: board-dependent
+ 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B,
+ 2:VREF_CA to CH_A and VREF_DQ_B to CH_B
+**/
+ UINT8 CaVrefConfig;
+
+/** Offset 0x0095 - Smram Mask
+ The SMM Regions AB-SEG and/or H-SEG reserved
+ 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both
+**/
+ UINT8 SmramMask;
+
+/** Offset 0x0096 - Dqs Pins Interleaved Setting
+ Indicates DqPinsInterleaved setting: board-dependent
+ $EN_DIS
+**/
+ UINT8 DqPinsInterleaved;
+
+/** Offset 0x0097 - LPDDR4 Write DQ/DQS Retraining
+ Enables/Disable LPDDR4 Write DQ/DQS Retraining
+ $EN_DIS
+**/
+ UINT8 Lp4DqsOscEn;
+
+/** Offset 0x0098 - Ibecc
+ Enables/Disable Ibecc
+ $EN_DIS
+**/
+ UINT8 Ibecc;
+
+/** Offset 0x0099 - IbeccParity
+ In-Band ECC Parity Control
+ $EN_DIS
+**/
+ UINT8 IbeccParity;
+
+/** Offset 0x009A - IbeccOperationMode
+ In-Band ECC Operation Mode
+ 0:Protect base on address range, 1: Non-protected, 2: All protected
+**/
+ UINT8 IbeccOperationMode;
+
+/** Offset 0x009B - IbeccErrorInj Note: Modification accepts the disclaimer shown in the Help text
+ Disclaimer: Warning: This must NOT be enabled for production!!! Enabling Error Injection
+ allows attackers who have access to the Host Operating System to inject IBECC errors
+ that can cause unintended memory corruption and enable the leak of security data
+ in the BIOS stolen memory regions.
+ $EN_DIS
+**/
+ UINT8 IbeccErrorInj;
+
+/** Offset 0x009C - IbeccProtectedRegionEnable
+ In-Band ECC Protected Region Enable
+ $EN_DIS
+**/
+ UINT8 IbeccProtectedRegionEnable[8];
+
+/** Offset 0x00A4 - IbeccProtectedRegionBases
+ IBECC Protected Region Bases
+**/
+ UINT16 IbeccProtectedRegionBase[8];
+
+/** Offset 0x00B4 - IbeccProtectedRegionMasks
+ IBECC Protected Region Masks
+**/
+ UINT16 IbeccProtectedRegionMask[8];
+
+/** Offset 0x00C4 - MrcTaskDebugPrintEnable
+ Mrc Task Debug Print Enable. 0(Default)=Disable, non-Zero=Enable Task Debug print
+**/
+ UINT8 MrcTaskDebugEnable;
+
+/** Offset 0x00C5 - Rank Margin Tool per Task
+ This option enables the user to execute Rank Margin Tool per major training step
+ in the MRC.
+ $EN_DIS
+**/
+ UINT8 RmtPerTask;
+
+/** Offset 0x00C6 - Training Trace
+ This option enables the trained state tracing feature in MRC. This feature will
+ print out the key training parameters state across major training steps.
+ $EN_DIS
+**/
+ UINT8 TrainTrace;
+
+/** Offset 0x00C7
+**/
+ UINT8 UnusedUpdSpace0;
+
+/** Offset 0x00C8 - Intel Enhanced Debug
+ Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied
+ 0 : Disable, 0x400000 : Enable
+**/
+ UINT32 IedSize;
+
+/** Offset 0x00CC - Tseg Size
+ Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build
+ 0x0400000:4MB, 0x01000000:16MB
+**/
+ UINT32 TsegSize;
+
+/** Offset 0x00D0 - MMIO Size
+ Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB
+**/
+ UINT16 MmioSize;
+
+/** Offset 0x00D2 - LowSupplyEnData
+ Enable: Enable Low Supply for LPDDR4 Data, Disable(Default)
+ $EN_DIS
+**/
+ UINT8 LowSupplyEnData;
+
+/** Offset 0x00D3 - LowSupplyEnCcc
+ Enable: Enable Low Supply for LPDDR4 Clock/Command/Control, Disable(Default)
+ $EN_DIS
+**/
+ UINT8 LowSupplyEnCcc;
+
+/** Offset 0x00D4 - Memory Test on Warm Boot
+ Run Base Memory Test on Warm Boot
+ 0:Disable, 1:Enable
+**/
+ UINT8 MemTestOnWarmBoot;
+
+/** Offset 0x00D5 - Probeless Trace
+ Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB.
+ This also requires IED to be enabled.
+ $EN_DIS
+**/
+ UINT8 ProbelessTrace;
+
+/** Offset 0x00D6 - Enable SMBus
+ Enable/disable SMBus controller.
+ $EN_DIS
+**/
+ UINT8 SmbusEnable;
+
+/** Offset 0x00D7 - Spd Address Tabl
+ Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used
+ if SPD Address is 00
+**/
+ UINT8 SpdAddressTable[4];
+
+/** Offset 0x00DB - Platform Debug Consent
+ To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type.
+ Enabling this BIOS option may alter the default value of other debug-related BIOS
+ options.\Manual: Do not use Platform Debug Consent to override other debug-relevant
+ policies, but the user must set each debug option manually, aimed at advanced users.\n
+ Note: DCI OOB (aka BSSB) uses CCA probe;[DCI OOB+DbC] and [USB2 DbC] have the same setting.
+ 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC),
+ 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual
+**/
+ UINT8 PlatformDebugConsent;
+
+/** Offset 0x00DC - DCI Enable
+ Determine if to enable DCI debug from host
+ $EN_DIS
+**/
+ UINT8 DciEn;
+
+/** Offset 0x00DD - DCI DbC Mode
+ Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both:
+ Set both USB2/3DBCEN; No Change: Comply with HW value
+ 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change
+**/
+ UINT8 DciDbcMode;
+
+/** Offset 0x00DE - Enable DCI ModPHY Pwoer Gate
+ Enable ModPHY Pwoer Gate when DCI is enabled
+ $EN_DIS
+**/
+ UINT8 DciModphyPg;
+
+/** Offset 0x00DF - USB3 Type-C UFP2DFP Kernel/Platform Debug Support
+ This BIOS option enables kernel and platform debug for USB3 interface over a UFP
+ Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting.
+ 0:Disabled, 1:Enabled, 2:No Change
+**/
+ UINT8 DciUsb3TypecUfpDbg;
+
+/** Offset 0x00E0 - PCH Trace Hub Mode
+ Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
+ if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
+ 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode
+**/
+ UINT8 PchTraceHubMode;
+
+/** Offset 0x00E1 - PCH Trace Hub Memory Region 0 buffer Size
+ Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg0Size;
+
+/** Offset 0x00E2 - PCH Trace Hub Memory Region 1 buffer Size
+ Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg1Size;
+
+/** Offset 0x00E3 - PchPreMemRsvd
+ Reserved for PCH Pre-Mem Reserved
+ $EN_DIS
+**/
+ UINT8 PchPreMemRsvd[7];
+
+/** Offset 0x00EA - State of X2APIC_OPT_OUT bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 X2ApicOptOut;
+
+/** Offset 0x00EB - State of DMA_CONTROL_GUARANTEE bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 DmaControlGuarantee;
+
+/** Offset 0x00EC - Base addresses for VT-d function MMIO access
+ Base addresses for VT-d MMIO access per VT-d engine
+**/
+ UINT32 VtdBaseAddress[9];
+
+/** Offset 0x0110 - Disable VT-d
+ 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
+ $EN_DIS
+**/
+ UINT8 VtdDisable;
+
+/** Offset 0x0111 - Vtd Programming for Igd
+ 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar
+ programming disabled)
+ $EN_DIS
+**/
+ UINT8 VtdIgdEnable;
+
+/** Offset 0x0112 - Vtd Programming for Ipu
+ 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar
+ programming disabled)
+ $EN_DIS
+**/
+ UINT8 VtdIpuEnable;
+
+/** Offset 0x0113 - Vtd Programming for Iop
+ 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar
+ programming disabled)
+ $EN_DIS
+**/
+ UINT8 VtdIopEnable;
+
+/** Offset 0x0114 - Vtd Programming for ITbt
+ 1=Enable/TRUE (ITbt VT-d Bar programming enabled), 0=Disable/FLASE (ITbt VT-d Bar
+ programming disabled)
+ $EN_DIS
+**/
+ UINT8 VtdItbtEnable;
+
+/** Offset 0x0115 - Disable Te Igd
+ 0=Enable/FALSE(Te Igd enabled), 1=Disable/TRUE (Te Igd disabled)
+ $EN_DIS
+**/
+ UINT8 DisableTeIgd;
+
+/** Offset 0x0116 - Internal Graphics Pre-allocated Memory
+ Size of memory preallocated for internal graphics.
+ 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB,
+ 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB,
+ 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB
+**/
+ UINT8 IgdDvmt50PreAlloc;
+
+/** Offset 0x0117 - Internal Graphics
+ Enable/disable internal graphics.
+ $EN_DIS
+**/
+ UINT8 InternalGfx;
+
+/** Offset 0x0118 - Aperture Size
+ Select the Aperture Size.
+ 0:128 MB, 1:256 MB, 2:512 MB
+**/
+ UINT8 ApertureSize;
+
+/** Offset 0x0119 - Board Type
+ MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile
+ Halo, 7=UP Server
+ 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server
+**/
+ UINT8 UserBd;
+
+/** Offset 0x011A - DDR Frequency Limit
+ Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
+ 2133, 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 DdrFreqLimit;
+
+/** Offset 0x011C - SA GV
+ System Agent dynamic frequency support and when enabled memory will be training
+ at three different frequencies.
+ 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled
+**/
+ UINT8 SaGv;
+
+/** Offset 0x011D - DDR Speed Control
+ DDR Frequency and Gear control for all SAGV points.
+ 0:Auto, 1:Manual
+**/
+ UINT8 DdrSpeedControl;
+
+/** Offset 0x011E - Low Frequency
+ SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133,
+ 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 FreqSaGvLow;
+
+/** Offset 0x0120 - Mid Frequency
+ SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133,
+ 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 FreqSaGvMid;
+
+/** Offset 0x0122 - Channel A DIMM Control
+ Channel A DIMM Control Support - Enable or Disable Dimms on Channel A.
+ 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs
+**/
+ UINT8 DisableDimmChannel0;
+
+/** Offset 0x0123 - Channel B DIMM Control
+ Channel B DIMM Control Support - Enable or Disable Dimms on Channel B.
+ 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs
+**/
+ UINT8 DisableDimmChannel1;
+
+/** Offset 0x0124 - Scrambler Support
+ This option enables data scrambling in memory.
+ $EN_DIS
+**/
+ UINT8 ScramblerSupport;
+
+/** Offset 0x0125 - Ddr4OneDpc
+ DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only,
+ or on both (default)
+ 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled
+**/
+ UINT8 Ddr4OneDpc;
+
+/** Offset 0x0126
+**/
+ UINT8 UnusedUpdSpace1[2];
+
+/** Offset 0x0128 - MMA Test Content Pointer
+ Pointer to MMA Test Content in Memory
+**/
+ UINT32 MmaTestContentPtr;
+
+/** Offset 0x012C - MMA Test Content Size
+ Size of MMA Test Content in Memory
+**/
+ UINT32 MmaTestContentSize;
+
+/** Offset 0x0130 - MMA Test Config Pointer
+ Pointer to MMA Test Config in Memory
+**/
+ UINT32 MmaTestConfigPtr;
+
+/** Offset 0x0134 - MMA Test Config Size
+ Size of MMA Test Config in Memory
+**/
+ UINT32 MmaTestConfigSize;
+
+/** Offset 0x0138 - SPD Profile Selected
+ Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP
+ Profile 1, 3=XMP Profile 2
+ 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2
+**/
+ UINT8 SpdProfileSelected;
+
+/** Offset 0x0139
+**/
+ UINT8 UnusedUpdSpace2;
+
+/** Offset 0x013A - Memory Voltage
+ Memory Voltage Override (Vddq). Default = no override
+ 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40
+ Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts
+**/
+ UINT16 VddVoltage;
+
+/** Offset 0x013C - Memory Reference Clock
+ 100MHz, 133MHz.
+ 0:133MHz, 1:100MHz
+**/
+ UINT8 RefClk;
+
+/** Offset 0x013D - Memory Ratio
+ Automatic or the frequency will equal ratio times reference clock. Set to Auto to
+ recalculate memory timings listed below.
+ 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15
+**/
+ UINT8 Ratio;
+
+/** Offset 0x013E - tCL
+ CAS Latency, 0: AUTO, max: 31
+**/
+ UINT8 tCL;
+
+/** Offset 0x013F - tCWL
+ Min CAS Write Latency Delay Time, 0: AUTO, max: 34
+**/
+ UINT8 tCWL;
+
+/** Offset 0x0140 - tFAW
+ Min Four Activate Window Delay Time, 0: AUTO, max: 63
+**/
+ UINT16 tFAW;
+
+/** Offset 0x0142 - tRAS
+ RAS Active Time, 0: AUTO, max: 64
+**/
+ UINT16 tRAS;
+
+/** Offset 0x0144 - tRCD/tRP
+ RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63
+**/
+ UINT8 tRCDtRP;
+
+/** Offset 0x0145
+**/
+ UINT8 UnusedUpdSpace3;
+
+/** Offset 0x0146 - tREFI
+ Refresh Interval, 0: AUTO, max: 65535
+**/
+ UINT16 tREFI;
+
+/** Offset 0x0148 - tRFC
+ Min Refresh Recovery Delay Time, 0: AUTO, max: 1023
+**/
+ UINT16 tRFC;
+
+/** Offset 0x014A - tRRD
+ Min Row Active to Row Active Delay Time, 0: AUTO, max: 15
+**/
+ UINT8 tRRD;
+
+/** Offset 0x014B - tRTP
+ Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal
+ values: 5, 6, 7, 8, 9, 10, 12
+**/
+ UINT8 tRTP;
+
+/** Offset 0x014C - tWR
+ Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18,
+ 20, 24, 30, 34, 40
+ 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30,
+ 34:34, 40:40
+**/
+ UINT8 tWR;
+
+/** Offset 0x014D - tWTR
+ Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28
+**/
+ UINT8 tWTR;
+
+/** Offset 0x014E - NMode
+ System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N
+**/
+ UINT8 NModeSupport;
+
+/** Offset 0x014F - DllBwEn[0]
+ DllBwEn[0], for 1067 (0..7)
+**/
+ UINT8 DllBwEn0;
+
+/** Offset 0x0150 - DllBwEn[1]
+ DllBwEn[1], for 1333 (0..7)
+**/
+ UINT8 DllBwEn1;
+
+/** Offset 0x0151 - DllBwEn[2]
+ DllBwEn[2], for 1600 (0..7)
+**/
+ UINT8 DllBwEn2;
+
+/** Offset 0x0152 - DllBwEn[3]
+ DllBwEn[3], for 1867 and up (0..7)
+**/
+ UINT8 DllBwEn3;
+
+/** Offset 0x0153 - ISVT IO Port Address
+ ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default
+**/
+ UINT8 IsvtIoPort;
+
+/** Offset 0x0154 - Enable Intel HD Audio (Azalia)
+ 0: Disable, 1: Enable (Default) Azalia controller
+ $EN_DIS
+**/
+ UINT8 PchHdaEnable;
+
+/** Offset 0x0155 - Enable PSE Controller
+ 0: Disable; 1: Enable (Default) PSE controller
+ $EN_DIS
+**/
+ UINT8 PchPseEnable;
+
+/** Offset 0x0156 - CPU Trace Hub Mode
+ Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
+ if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
+ 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode
+**/
+ UINT8 CpuTraceHubMode;
+
+/** Offset 0x0157 - CPU Trace Hub Memory Region 0
+ CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg0Size;
+
+/** Offset 0x0158 - CPU Trace Hub Memory Region 1
+ CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg1Size;
+
+/** Offset 0x0159 - SA GV Low Gear
+ Gear Selection for SAGV Low point
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvLowGear2;
+
+/** Offset 0x015A - SA GV Mid Gear
+ Gear Selection for SAGV Mid point
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvMidGear2;
+
+/** Offset 0x015B - SA GV High Gear
+ Gear Selection for SAGV High point, or when SAGV is disabled
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvHighGear2;
+
+/** Offset 0x015C - HECI Timeouts
+ 0: Disable, 1: Enable (Default) timeout check for HECI
+ $EN_DIS
+**/
+ UINT8 HeciTimeouts;
+
+/** Offset 0x015D
+**/
+ UINT8 UnusedUpdSpace4[3];
+
+/** Offset 0x0160 - HECI1 BAR address
+ BAR address of HECI1
+**/
+ UINT32 Heci1BarAddress;
+
+/** Offset 0x0164 - HECI2 BAR address
+ BAR address of HECI2
+**/
+ UINT32 Heci2BarAddress;
+
+/** Offset 0x0168 - HECI3 BAR address
+ BAR address of HECI3
+**/
+ UINT32 Heci3BarAddress;
+
+/** Offset 0x016C - HG dGPU Power Delay
+ HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is
+ 300=300 microseconds
+**/
+ UINT16 HgDelayAfterPwrEn;
+
+/** Offset 0x016E - HG dGPU Reset Delay
+ HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100
+ microseconds
+**/
+ UINT16 HgDelayAfterHoldReset;
+
+/** Offset 0x0170 - MMIO size adjustment for AUTO mode
+ Positive number means increasing MMIO size, Negative value means decreasing MMIO
+ size: 0 (Default)=no change to AUTO mode MMIO size
+**/
+ UINT16 MmioSizeAdjustment;
+
+/** Offset 0x0172 - PCIe ASPM programming will happen in relation to the Oprom
+ Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default):
+ Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after
+ Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume
+ 0:Before, 1:After
+**/
+ UINT8 InitPcieAspmAfterOprom;
+
+/** Offset 0x0173 - Selection of the primary display device
+ 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics
+ 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics
+**/
+ UINT8 PrimaryDisplay;
+
+/** Offset 0x0174 - Selection of PSMI Region size
+ 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0
+ 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB
+**/
+ UINT8 PsmiRegionSize;
+
+/** Offset 0x0175
+**/
+ UINT8 UnusedUpdSpace5[3];
+
+/** Offset 0x0178 - Temporary MMIO address for GMADR
+ The reference code will use this as Temporary MMIO address space to access GMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to
+ (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress
+ - 0x1) (Where ApertureSize = 256MB)
+**/
+ UINT32 GmAdr;
+
+/** Offset 0x017C - Temporary MMIO address for GTTMMADR
+ The reference code will use this as Temporary MMIO address space to access GTTMMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr
+ to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO
+ + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB)
+**/
+ UINT32 GttMmAdr;
+
+/** Offset 0x0180 - Selection of iGFX GTT Memory size
+ 1=2MB, 2=4MB, 3=8MB, Default is 3
+ 1:2MB, 2:4MB, 3:8MB
+**/
+ UINT16 GttSize;
+
+/** Offset 0x0182 - Hybrid Graphics GPIO information for PEG 0
+ Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs
+**/
+ UINT8 CpuPcie0Rtd3Gpio[24];
+
+/** Offset 0x019A - Enable/Disable MRC TXT dependency
+ When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default):
+ MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization
+ $EN_DIS
+**/
+ UINT8 TxtImplemented;
+
+/** Offset 0x019B - Enable/Disable SA OcSupport
+ Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport
+ $EN_DIS
+**/
+ UINT8 SaOcSupport;
+
+/** Offset 0x019C - GT slice Voltage Mode
+ 0(Default): Adaptive, 1: Override
+ 0: Adaptive, 1: Override
+**/
+ UINT8 GtVoltageMode;
+
+/** Offset 0x019D - Maximum GTs turbo ratio override
+ 0(Default)=Minimal/Auto, 60=Maximum
+**/
+ UINT8 GtMaxOcRatio;
+
+/** Offset 0x019E - The voltage offset applied to GT slice
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 GtVoltageOffset;
+
+/** Offset 0x01A0 - The GT slice voltage override which is applied to the entire range of GT frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtVoltageOverride;
+
+/** Offset 0x01A2 - adaptive voltage applied during turbo frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtExtraTurboVoltage;
+
+/** Offset 0x01A4 - voltage offset applied to the SA
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 SaVoltageOffset;
+
+/** Offset 0x01A6 - PCIe root port Function number for Hybrid Graphics dGPU
+ Root port Index number to indicate which PCIe root port has dGPU
+**/
+ UINT8 RootPortIndex;
+
+/** Offset 0x01A7 - Realtime Memory Timing
+ 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform
+ realtime memory timing changes after MRC_DONE.
+ 0: Disabled, 1: Enabled
+**/
+ UINT8 RealtimeMemoryTiming;
+
+/** Offset 0x01A8 - This is policy to control iTBT PCIe Multiple Segment setting.
+ When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the
+ TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieMultipleSegmentEnabled;
+
+/** Offset 0x01A9 - Enable/Disable SA IPU
+ Enable(Default): Enable SA IPU, Disable: Disable SA IPU
+ $EN_DIS
+**/
+ UINT8 SaIpuEnable;
+
+/** Offset 0x01AA - IPU IMR Configuration
+ 0:IPU Camera, 1:IPU Gen Default is 0
+ 0:IPU Camera, 1:IPU Gen
+**/
+ UINT8 SaIpuImrConfiguration;
+
+/** Offset 0x01AB - IMGU CLKOUT Configuration
+ The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 ImguClkOutEn[5];
+
+/** Offset 0x01B0 - IPU FUSA Configuration
+ 0:FUSA Disable, 1:FUSA Enable Default is 0
+ 0:FUSA Disable, 1:FUSA Enable
+**/
+ UINT8 SaIpuFusaConfigEnable;
+
+/** Offset 0x01B1
+**/
+ UINT8 UnusedUpdSpace6[3];
+
+/** Offset 0x01B4 - Enable PCIE RP Mask
+ Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
+ for port1, bit1 for port2, and so on.
+**/
+ UINT32 CpuPcieRpEnableMask;
+
+/** Offset 0x01B8 - Assertion on Link Down GPIOs
+ GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down
+ GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs
+ 0:Disable, 1:Enable
+**/
+ UINT8 CpuPcieRpLinkDownGpios;
+
+/** Offset 0x01B9 - Enable ClockReq Messaging
+ ClockReq Messaging. Disabled(0x0): Disable ClockReq Messaging, Enabled(0x1)(Default):
+ Enable ClockReq Messaging
+ 0:Disable, 1:Enable
+**/
+ UINT8 CpuPcieRpClockReqMsgEnable;
+
+/** Offset 0x01BA - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3;
+ 4: Gen4 (see: CPU_PCIE_SPEED).
+**/
+ UINT8 CpuPcieRpPcieSpeed[4];
+
+/** Offset 0x01BE - Selection of PSMI Support On/Off
+ 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support
+ $EN_DIS
+**/
+ UINT8 GtPsmiSupport;
+
+/** Offset 0x01BF - Selection of DiSM Region Size
+ DiSM Size to be allocated for 2LM Sku Default is 0
+ 0:0GB, 1:1GB, 2:2GB, 3:3GB, 4:4GB, 5:5GB, 6:6GB, 7:7GB
+**/
+ UINT8 DismSize;
+
+/** Offset 0x01C0 - Pram Size
+ Persisted Ram Size. Default is Disabled
+ 0x30:Disable, 0x31:4MB, 0x32:16MB, 0x33:64MB
+**/
+ UINT8 PramSize;
+
+/** Offset 0x01C1 - SaPreMemProductionRsvd
+ Reserved for SA Pre-Mem Production
+ $EN_DIS
+**/
+ UINT8 SaPreMemProductionRsvd[138];
+
+/** Offset 0x024B - DMI Max Link Speed
+ Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
+ Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 DmiMaxLinkSpeed;
+
+/** Offset 0x024C - DMI Equalization Phase 2
+ DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default):
+ AUTO - Use the current default method
+ 0:Disable phase2, 1:Enable phase2, 2:Auto
+**/
+ UINT8 DmiGen3EqPh2Enable;
+
+/** Offset 0x024D - DMI Gen3 Equalization Phase3
+ DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 DmiGen3EqPh3Method;
+
+/** Offset 0x024E - Enable/Disable DMI GEN3 Static EQ Phase1 programming
+ Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static
+ Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 DmiGen3ProgramStaticEq;
+
+/** Offset 0x024F - DeEmphasis control for DMI
+ DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB
+ 0: -6dB, 1: -3.5dB
+**/
+ UINT8 DmiDeEmphasis;
+
+/** Offset 0x0250 - DMI Gen3 Root port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+**/
+ UINT8 DmiGen3RootPortPreset[8];
+
+/** Offset 0x0258 - DMI Gen3 End port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+**/
+ UINT8 DmiGen3EndPointPreset[8];
+
+/** Offset 0x0260 - DMI Gen3 End port Hint values per lane
+ Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 DmiGen3EndPointHint[8];
+
+/** Offset 0x0268 - DMI Gen3 RxCTLEp per-Bundle control
+ Range: 0-15, 0 is default for each bundle, must be specified based upon platform design
+**/
+ UINT8 DmiGen3RxCtlePeaking[4];
+
+/** Offset 0x026C - BIST on Reset
+ Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 BistOnReset;
+
+/** Offset 0x026D - Skip Stop PBET Timer Enable/Disable
+ Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 SkipStopPbet;
+
+/** Offset 0x026E - Over clocking support
+ Over clocking support; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 OcSupport;
+
+/** Offset 0x026F - Over clocking Lock
+ Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 OcLock;
+
+/** Offset 0x0270 - Maximum Core Turbo Ratio Override
+ Maximum core turbo ratio override allows to increase CPU core frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 CoreMaxOcRatio;
+
+/** Offset 0x0271 - Core voltage mode
+ Core voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 CoreVoltageMode;
+
+/** Offset 0x0272 - Maximum clr turbo ratio override
+ Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 RingMaxOcRatio;
+
+/** Offset 0x0273 - Hyper Threading Enable/Disable
+ Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 HyperThreading;
+
+/** Offset 0x0274 - Enable or Disable CPU Ratio Override
+ Enable or Disable CPU Ratio Override; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CpuRatioOverride;
+
+/** Offset 0x0275 - CPU ratio value
+ CPU ratio value. Valid Range 0 to 63
+**/
+ UINT8 CpuRatio;
+
+/** Offset 0x0276 - Boot frequency
+ Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.-
+ <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo
+ is selected BIOS will start in max non-turbo mode and switch to Turbo mode.
+ 0:0, 1:1, 2:2
+**/
+ UINT8 BootFrequency;
+
+/** Offset 0x0277 - Number of active cores
+ Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2:
+ 2 </b>;<b>3: 3 </b>
+ 0:All, 1:1, 2:2, 3:3
+**/
+ UINT8 ActiveCoreCount;
+
+/** Offset 0x0278 - Processor Early Power On Configuration FCLK setting
+ <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.-
+ 2: 400 MHz. - 3: Reserved
+ 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved
+**/
+ UINT8 FClkFrequency;
+
+/** Offset 0x0279 - Set JTAG power in C10 and deeper power states
+ False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10
+ and deeper power states for debug purpose. <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 JtagC10PowerGateDisable;
+
+/** Offset 0x027A - Enable or Disable VMX
+ Enable or Disable VMX; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 VmxEnable;
+
+/** Offset 0x027B - AVX2 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx2RatioOffset;
+
+/** Offset 0x027C - AVX3 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx3RatioOffset;
+
+/** Offset 0x027D - BCLK Adaptive Voltage Enable
+ When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0:
+ Disable;<b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 BclkAdaptiveVoltage;
+
+/** Offset 0x027E - core voltage override
+ The core voltage override which is applied to the entire range of cpu core frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageOverride;
+
+/** Offset 0x0280 - Core Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageAdaptive;
+
+/** Offset 0x0282 - Core Turbo voltage Offset
+ The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000
+**/
+ UINT16 CoreVoltageOffset;
+
+/** Offset 0x0284 - Core PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 CorePllVoltageOffset;
+
+/** Offset 0x0285 - Ring Downbin
+ Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always
+ lower than the core ratio.0: Disable; <b>1: Enable.</b>
+ $EN_DIS
+**/
+ UINT8 RingDownBin;
+
+/** Offset 0x0286 - Ring voltage mode
+ Ring voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 RingVoltageMode;
+
+/** Offset 0x0287 - TjMax Offset
+ TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support
+ TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63
+**/
+ UINT8 TjMaxOffset;
+
+/** Offset 0x0288 - Ring voltage override
+ The ring voltage override which is applied to the entire range of cpu ring frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageOverride;
+
+/** Offset 0x028A - Ring Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageAdaptive;
+
+/** Offset 0x028C - Ring Turbo voltage Offset
+ The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000
+**/
+ UINT16 RingVoltageOffset;
+
+/** Offset 0x028E
+**/
+ UINT8 UnusedUpdSpace7[2];
+
+/** Offset 0x0290 - ElixirSpringsPatchAddr
+ Address of Elixir Springs Patches
+**/
+ UINT32 ElixirSpringsPatchAddr;
+
+/** Offset 0x0294 - ElixirSpringsPatchSize
+ Size of Elixir Springs Patches
+**/
+ UINT32 ElixirSpringsPatchSize;
+
+/** Offset 0x0298 - CPU Run Control
+ Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2:
+ No Change</b>
+ 0:Disabled, 1:Enabled, 2:No Change
+**/
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x0299 - CPU Run Control Lock
+ Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceLockEnable;
+
+/** Offset 0x029A - BiosGuard
+ Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 BiosGuard;
+
+/** Offset 0x029B
+**/
+ UINT8 BiosGuardToolsInterface;
+
+/** Offset 0x029C - EnableSgx
+ Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control
+ 0: Disable, 1: Enable, 2: Software Control
+**/
+ UINT8 EnableSgx;
+
+/** Offset 0x029D - Txt
+ Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 Txt;
+
+/** Offset 0x029E
+**/
+ UINT8 UnusedUpdSpace8[2];
+
+/** Offset 0x02A0 - PrmrrSize
+ Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
+**/
+ UINT32 PrmrrSize;
+
+/** Offset 0x02A4 - SinitMemorySize
+ Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable
+**/
+ UINT32 SinitMemorySize;
+
+/** Offset 0x02A8 - TxtDprMemoryBase
+ Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable
+**/
+ UINT64 TxtDprMemoryBase;
+
+/** Offset 0x02B0 - TxtHeapMemorySize
+ Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable
+**/
+ UINT32 TxtHeapMemorySize;
+
+/** Offset 0x02B4 - TxtDprMemorySize
+ Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable
+**/
+ UINT32 TxtDprMemorySize;
+
+/** Offset 0x02B8 - BiosAcmBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 BiosAcmBase;
+
+/** Offset 0x02BC - BiosAcmSize
+ Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable
+**/
+ UINT32 BiosAcmSize;
+
+/** Offset 0x02C0 - ApStartupBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 ApStartupBase;
+
+/** Offset 0x02C4 - TgaSize
+ Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable
+**/
+ UINT32 TgaSize;
+
+/** Offset 0x02C8 - TxtLcpPdBase
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable
+**/
+ UINT64 TxtLcpPdBase;
+
+/** Offset 0x02D0 - TxtLcpPdSize
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable
+**/
+ UINT64 TxtLcpPdSize;
+
+/** Offset 0x02D8 - IsTPMPresence
+ IsTPMPresence default values
+**/
+ UINT8 IsTPMPresence;
+
+/** Offset 0x02D9 - ReservedSecurityPreMem
+ Reserved for Security Pre-Mem
+ $EN_DIS
+**/
+ UINT8 ReservedSecurityPreMem[6];
+
+/** Offset 0x02DF - PCH Master Clock Gating Control
+ Provide a master control for clock gating for all PCH devices, 0: Disabled; 1: Default
+ $EN_DIS
+**/
+ UINT8 PchMasterClockGating;
+
+/** Offset 0x02E0 - PCH Master Power Gating Control
+ Provide a master control for pwoer gating for all PCH devices, 0: Disabled; 1: Default
+ $EN_DIS
+**/
+ UINT8 PchMasterPowerGating;
+
+/** Offset 0x02E1
+**/
+ UINT8 UnusedUpdSpace9;
+
+/** Offset 0x02E2 - FIA Lane Reversal Enable/Disable config mask
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable Lane Reversal. If Enabled,
+ the x2 FIA Lane will be flipped
+**/
+ UINT16 FiaLaneReversalEnable;
+
+/** Offset 0x02E4 - Enable PCH HSIO PCIE Rx Set Ctle
+ Enable PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtleEnable[24];
+
+/** Offset 0x02FC - PCH HSIO PCIE Rx Set Ctle Value
+ PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtle[24];
+
+/** Offset 0x0314 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24];
+
+/** Offset 0x032C - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen1DownscaleAmp[24];
+
+/** Offset 0x0344 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24];
+
+/** Offset 0x035C - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen2DownscaleAmp[24];
+
+/** Offset 0x0374 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24];
+
+/** Offset 0x038C - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen3DownscaleAmp[24];
+
+/** Offset 0x03A4 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen1DeEmphEnable[24];
+
+/** Offset 0x03BC - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value
+ PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen1DeEmph[24];
+
+/** Offset 0x03D4 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24];
+
+/** Offset 0x03EC - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value
+ PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph3p5[24];
+
+/** Offset 0x0404 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24];
+
+/** Offset 0x041C - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value
+ PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph6p0[24];
+
+/** Offset 0x0434 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen1EqBoostMagEnable[8];
+
+/** Offset 0x043C - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen1EqBoostMag[8];
+
+/** Offset 0x0444 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen2EqBoostMagEnable[8];
+
+/** Offset 0x044C - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen2EqBoostMag[8];
+
+/** Offset 0x0454 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen3EqBoostMagEnable[8];
+
+/** Offset 0x045C - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen3EqBoostMag[8];
+
+/** Offset 0x0464 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8];
+
+/** Offset 0x046C - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen1DownscaleAmp[8];
+
+/** Offset 0x0474 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8];
+
+/** Offset 0x047C - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen2DownscaleAmp[8];
+
+/** Offset 0x0484 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8];
+
+/** Offset 0x048C - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen3DownscaleAmp[8];
+
+/** Offset 0x0494 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen1DeEmphEnable[8];
+
+/** Offset 0x049C - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen1DeEmph[8];
+
+/** Offset 0x04A4 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen2DeEmphEnable[8];
+
+/** Offset 0x04AC - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen2DeEmph[8];
+
+/** Offset 0x04B4 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen3DeEmphEnable[8];
+
+/** Offset 0x04BC - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen3DeEmph[8];
+
+/** Offset 0x04C4 - PCH LPC Enhance the port 8xh decoding
+ Original LPC only decodes one byte of port 80h.
+ $EN_DIS
+**/
+ UINT8 PchLpcEnhancePort8xhDecoding;
+
+/** Offset 0x04C5 - PCH Port80 Route
+ Control where the Port 80h cycles are sent, 0: LPC; 1: PCI.
+ $EN_DIS
+**/
+ UINT8 PchPort80Route;
+
+/** Offset 0x04C6 - Enable SMBus ARP support
+ Enable SMBus ARP support.
+ $EN_DIS
+**/
+ UINT8 SmbusArpEnable;
+
+/** Offset 0x04C7 - Number of RsvdSmbusAddressTable.
+ The number of elements in the RsvdSmbusAddressTable.
+**/
+ UINT8 PchNumRsvdSmbusAddresses;
+
+/** Offset 0x04C8 - SMBUS Base Address
+ SMBUS Base Address (IO space).
+**/
+ UINT16 PchSmbusIoBase;
+
+/** Offset 0x04CA - Enable SMBus Alert Pin
+ Enable SMBus Alert Pin.
+ $EN_DIS
+**/
+ UINT8 PchSmbAlertEnable;
+
+/** Offset 0x04CB - Usage type for ClkSrc
+ 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
+ (free running), 0xFF: not used
+**/
+ UINT8 PcieClkSrcUsage[16];
+
+/** Offset 0x04DB - ClkReq-to-ClkSrc mapping
+ Number of ClkReq signal assigned to ClkSrc
+**/
+ UINT8 PcieClkSrcClkReq[16];
+
+/** Offset 0x04EB
+**/
+ UINT8 UnusedUpdSpace10;
+
+/** Offset 0x04EC - Point of RsvdSmbusAddressTable
+ Array of addresses reserved for non-ARP-capable SMBus devices.
+**/
+ UINT32 RsvdSmbusAddressTablePtr;
+
+/** Offset 0x04F0 - Enable PCIE RP Mask
+ Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
+ for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpEnableMask;
+
+/** Offset 0x04F4 - Debug Interfaces
+ Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub,
+ BIT2 - Not used.
+**/
+ UINT8 PcdDebugInterfaceFlags;
+
+/** Offset 0x04F5 - Serial Io Uart Debug Controller Number
+ Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
+ Core interface, it cannot be used for debug purpose.
+ 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
+**/
+ UINT8 SerialIoUartDebugControllerNumber;
+
+/** Offset 0x04F6 - Serial Io Uart Debug Auto Flow
+ Enables UART hardware flow control, CTS and RTS lines.
+ $EN_DIS
+**/
+ UINT8 SerialIoUartDebugAutoFlow;
+
+/** Offset 0x04F7
+**/
+ UINT8 UnusedUpdSpace11;
+
+/** Offset 0x04F8 - Serial Io Uart Debug BaudRate
+ Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600,
+ 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000
+**/
+ UINT32 SerialIoUartDebugBaudRate;
+
+/** Offset 0x04FC - Serial Io Uart Debug Parity
+ Set default Parity.
+ 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartDebugParity;
+
+/** Offset 0x04FD - Serial Io Uart Debug Stop Bits
+ Set default stop bits.
+ 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
+**/
+ UINT8 SerialIoUartDebugStopBits;
+
+/** Offset 0x04FE - Serial Io Uart Debug Data Bits
+ Set default word length. 0: Default, 5,6,7,8
+ 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS
+**/
+ UINT8 SerialIoUartDebugDataBits;
+
+/** Offset 0x04FF
+**/
+ UINT8 UnusedUpdSpace12;
+
+/** Offset 0x0500 - Serial Io Uart Debug Mmio Base
+ Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode
+ = SerialIoUartPci.
+**/
+ UINT32 SerialIoUartDebugMmioBase;
+
+/** Offset 0x0504 - ISA Serial Base selection
+ Select ISA Serial Base address. Default is 0x3F8.
+ 0:0x3F8, 1:0x2F8
+**/
+ UINT8 PcdIsaSerialUartBase;
+
+/** Offset 0x0505 - GT PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 GtPllVoltageOffset;
+
+/** Offset 0x0506 - Ring PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 RingPllVoltageOffset;
+
+/** Offset 0x0507 - System Agent PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 SaPllVoltageOffset;
+
+/** Offset 0x0508 - Memory Controller PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 McPllVoltageOffset;
+
+/** Offset 0x0509 - MRC Safe Config
+ Enables/Disable MRC Safe Config
+ $EN_DIS
+**/
+ UINT8 MrcSafeConfig;
+
+/** Offset 0x050A - TCSS Thunderbolt PCIE Root Port 0 Enable
+ Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie0En;
+
+/** Offset 0x050B - TCSS Thunderbolt PCIE Root Port 1 Enable
+ Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie1En;
+
+/** Offset 0x050C - TCSS Thunderbolt PCIE Root Port 2 Enable
+ Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie2En;
+
+/** Offset 0x050D - TCSS Thunderbolt PCIE Root Port 3 Enable
+ Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie3En;
+
+/** Offset 0x050E - TCSS USB HOST (xHCI) Enable
+ Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below
+ $EN_DIS
+**/
+ UINT8 TcssXhciEn;
+
+/** Offset 0x050F - TCSS USB DEVICE (xDCI) Enable
+ Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled
+ $EN_DIS
+**/
+ UINT8 TcssXdciEn;
+
+/** Offset 0x0510 - TCSS DMA0 Enable
+ Set TCSS DMA0. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssDma0En;
+
+/** Offset 0x0511 - TCSS DMA1 Enable
+ Set TCSS DMA1. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssDma1En;
+
+/** Offset 0x0512 - PcdSerialDebugBaudRate
+ Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200.
+ 3:9600, 4:19200, 6:56700, 7:115200
+**/
+ UINT8 PcdSerialDebugBaudRate;
+
+/** Offset 0x0513 - HobBufferSize
+ Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB
+ total HOB size).
+ 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value
+**/
+ UINT8 HobBufferSize;
+
+/** Offset 0x0514 - Early Command Training
+ Enables/Disable Early Command Training
+ $EN_DIS
+**/
+ UINT8 ECT;
+
+/** Offset 0x0515 - SenseAmp Offset Training
+ Enables/Disable SenseAmp Offset Training
+ $EN_DIS
+**/
+ UINT8 SOT;
+
+/** Offset 0x0516 - Early ReadMPR Timing Centering 2D
+ Enables/Disable Early ReadMPR Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDMPRTC2D;
+
+/** Offset 0x0517 - Read MPR Training
+ Enables/Disable Read MPR Training
+ $EN_DIS
+**/
+ UINT8 RDMPRT;
+
+/** Offset 0x0518 - Receive Enable Training
+ Enables/Disable Receive Enable Training
+ $EN_DIS
+**/
+ UINT8 RCVET;
+
+/** Offset 0x0519 - Jedec Write Leveling
+ Enables/Disable Jedec Write Leveling
+ $EN_DIS
+**/
+ UINT8 JWRL;
+
+/** Offset 0x051A - Early Write Time Centering 2D
+ Enables/Disable Early Write Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 EWRTC2D;
+
+/** Offset 0x051B - Early Read Time Centering 2D
+ Enables/Disable Early Read Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDTC2D;
+
+/** Offset 0x051C - Write Timing Centering 1D
+ Enables/Disable Write Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRTC1D;
+
+/** Offset 0x051D - Write Voltage Centering 1D
+ Enables/Disable Write Voltage Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRVC1D;
+
+/** Offset 0x051E - Read Timing Centering 1D
+ Enables/Disable Read Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 RDTC1D;
+
+/** Offset 0x051F - Dimm ODT Training
+ Enables/Disable Dimm ODT Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTT;
+
+/** Offset 0x0520 - DIMM RON Training
+ Enables/Disable DIMM RON Training
+ $EN_DIS
+**/
+ UINT8 DIMMRONT;
+
+/** Offset 0x0521 - Write Drive Strength/Equalization 2D
+ Enables/Disable Write Drive Strength/Equalization 2D
+ $EN_DIS
+**/
+ UINT8 WRDSEQT;
+
+/** Offset 0x0522 - Write Slew Rate Training
+ Enables/Disable Write Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 WRSRT;
+
+/** Offset 0x0523 - Read ODT Training
+ Enables/Disable Read ODT Training
+ $EN_DIS
+**/
+ UINT8 RDODTT;
+
+/** Offset 0x0524 - Read Equalization Training
+ Enables/Disable Read Equalization Training
+ $EN_DIS
+**/
+ UINT8 RDEQT;
+
+/** Offset 0x0525 - Read Amplifier Training
+ Enables/Disable Read Amplifier Training
+ $EN_DIS
+**/
+ UINT8 RDAPT;
+
+/** Offset 0x0526 - Write Timing Centering 2D
+ Enables/Disable Write Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRTC2D;
+
+/** Offset 0x0527 - Read Timing Centering 2D
+ Enables/Disable Read Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDTC2D;
+
+/** Offset 0x0528 - Write Voltage Centering 2D
+ Enables/Disable Write Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRVC2D;
+
+/** Offset 0x0529 - Read Voltage Centering 2D
+ Enables/Disable Read Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDVC2D;
+
+/** Offset 0x052A - Command Voltage Centering
+ Enables/Disable Command Voltage Centering
+ $EN_DIS
+**/
+ UINT8 CMDVC;
+
+/** Offset 0x052B - Late Command Training
+ Enables/Disable Late Command Training
+ $EN_DIS
+**/
+ UINT8 LCT;
+
+/** Offset 0x052C - Round Trip Latency Training
+ Enables/Disable Round Trip Latency Training
+ $EN_DIS
+**/
+ UINT8 RTL;
+
+/** Offset 0x052D - Turn Around Timing Training
+ Enables/Disable Turn Around Timing Training
+ $EN_DIS
+**/
+ UINT8 TAT;
+
+/** Offset 0x052E - Receive Enable Centering 1D
+ Enables/Disable Receive Enable Centering 1D
+ $EN_DIS
+**/
+ UINT8 RCVENC1D;
+
+/** Offset 0x052F - Rank Margin Tool
+ Enable/disable Rank Margin Tool.
+ $EN_DIS
+**/
+ UINT8 RMT;
+
+/** Offset 0x0530 - Margin Limit Check
+ Margin Limit Check. Choose level of margin check
+ 0:Disable, 1:L1, 2:L2, 3:Both
+**/
+ UINT8 MarginLimitCheck;
+
+/** Offset 0x0531
+**/
+ UINT8 UnusedUpdSpace13;
+
+/** Offset 0x0532 - Margin Limit L2
+ % of L1 check for margin limit check
+**/
+ UINT16 MarginLimitL2;
+
+/** Offset 0x0534 - Memory Test
+ Enables/Disable Memory Test
+ $EN_DIS
+**/
+ UINT8 MEMTST;
+
+/** Offset 0x0535 - DIMM SPD Alias Test
+ Enables/Disable DIMM SPD Alias Test
+ $EN_DIS
+**/
+ UINT8 ALIASCHK;
+
+/** Offset 0x0536 - Retrain Margin Check
+ Enables/Disable Retrain Margin Check
+ $EN_DIS
+**/
+ UINT8 RMC;
+
+/** Offset 0x0537 - Write Drive Strength Up/Dn independently
+ Enables/Disable Write Drive Strength Up/Dn independently
+ $EN_DIS
+**/
+ UINT8 WRDSUDT;
+
+/** Offset 0x0538 - Command Slew Rate Training
+ Enables/Disable Command Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 CMDSR;
+
+/** Offset 0x0539 - Command Drive Strength and Equalization 2D
+ Enables/Disable Command Drive Strength and Equalization 2D
+ $EN_DIS
+**/
+ UINT8 CMDDSEQ;
+
+/** Offset 0x053A - Command Normalization
+ Enables/Disable Command Normalization
+ $EN_DIS
+**/
+ UINT8 CMDNORM;
+
+/** Offset 0x053B - Early DQ Write Drive Strength and Equalization Training
+ Enables/Disable Early DQ Write Drive Strength and Equalization Training
+ $EN_DIS
+**/
+ UINT8 EWRDSEQ;
+
+/** Offset 0x053C - Read Voltage Centering
+ Enables/Disable Read Voltage Centering
+ $EN_DIS
+**/
+ UINT8 RDVC1D;
+
+/** Offset 0x053D - Write TCO Comp Training
+ Enables/Disable Write TCO Comp Training
+ $EN_DIS
+**/
+ UINT8 TXTCO;
+
+/** Offset 0x053E - Clock TCO Comp Training
+ Enables/Disable Clock TCO Comp Training
+ $EN_DIS
+**/
+ UINT8 CLKTCO;
+
+/** Offset 0x053F - Dimm ODT CA Training
+ Enables/Disable Dimm ODT CA Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTCA;
+
+/** Offset 0x0540 - Write TCO Dqs Training
+ Enables/Disable Write TCO Dqs Training
+ $EN_DIS
+**/
+ UINT8 TXTCODQS;
+
+/** Offset 0x0541 - Duty Cycle Correction
+ Enables/Disable Duty Cycle Correction
+ $EN_DIS
+**/
+ UINT8 DCC;
+
+/** Offset 0x0542 - DQ DFE Training
+ Enable/Disable DQ DFE Training
+ $EN_DIS
+**/
+ UINT8 DQDFE;
+
+/** Offset 0x0543 - Sense Amplifier Correction Training
+ Enable/Disable Sense Amplifier Correction Training
+ $EN_DIS
+**/
+ UINT8 SOTC;
+
+/** Offset 0x0544 - ECC Support
+ Enables/Disable ECC Support
+ $EN_DIS
+**/
+ UINT8 EccSupport;
+
+/** Offset 0x0545 - Memory Remap
+ Enables/Disable Memory Remap
+ $EN_DIS
+**/
+ UINT8 RemapEnable;
+
+/** Offset 0x0546 - MRC Time Measure
+ Enable/Disable MRC Time Measure
+ $EN_DIS
+**/
+ UINT8 MrcTimeMeasure;
+
+/** Offset 0x0547 - MRC Fast Boot
+ Enable/Disable MRC Fast flow
+ $EN_DIS
+**/
+ UINT8 MrcFastBoot;
+
+/** Offset 0x0548 - MRC Force Training on Warm
+ Enables/Disable the MRC training on warm boot
+ $EN_DIS
+**/
+ UINT8 MrcTrainOnWarm;
+
+/** Offset 0x0549 - Rank Interleave support
+ Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at
+ the same time.
+ $EN_DIS
+**/
+ UINT8 RankInterleave;
+
+/** Offset 0x054A - Enhanced Interleave support
+ Enables/Disable Enhanced Interleave support
+ $EN_DIS
+**/
+ UINT8 EnhancedInterleave;
+
+/** Offset 0x054B - Memory Trace
+ Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of
+ equal size. This option may change TOLUD and REMAP values as needed.
+ $EN_DIS
+**/
+ UINT8 MemoryTrace;
+
+/** Offset 0x054C - Ch Hash Support
+ Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode
+ $EN_DIS
+**/
+ UINT8 ChHashEnable;
+
+/** Offset 0x054D - Extern Therm Status
+ Enables/Disable Extern Therm Status
+ $EN_DIS
+**/
+ UINT8 EnableExtts;
+
+/** Offset 0x054E - Closed Loop Therm Manage
+ Enables/Disable Closed Loop Therm Manage
+ $EN_DIS
+**/
+ UINT8 EnableCltm;
+
+/** Offset 0x054F - Open Loop Therm Manage
+ Enables/Disable Open Loop Therm Manage
+ $EN_DIS
+**/
+ UINT8 EnableOltm;
+
+/** Offset 0x0550 - DDR PowerDown and idle counter
+ Enables/Disable DDR PowerDown and idle counter
+ $EN_DIS
+**/
+ UINT8 EnablePwrDn;
+
+/** Offset 0x0551 - DDR PowerDown and idle counter - LPDDR
+ Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 EnablePwrDnLpddr;
+
+/** Offset 0x0552 - Use user provided power weights, scale factor, and channel power floor values
+ Enables/Disable Use user provided power weights, scale factor, and channel power
+ floor values
+ $EN_DIS
+**/
+ UINT8 UserPowerWeightsEn;
+
+/** Offset 0x0553 - RAPL PL Lock
+ Enables/Disable RAPL PL Lock
+ $EN_DIS
+**/
+ UINT8 RaplLim2Lock;
+
+/** Offset 0x0554 - RAPL PL 2 enable
+ Enables/Disable RAPL PL 2 enable
+ $EN_DIS
+**/
+ UINT8 RaplLim2Ena;
+
+/** Offset 0x0555 - RAPL PL 1 enable
+ Enables/Disable RAPL PL 1 enable
+ $EN_DIS
+**/
+ UINT8 RaplLim1Ena;
+
+/** Offset 0x0556 - SelfRefresh Enable
+ Enables/Disable SelfRefresh Enable
+ $EN_DIS
+**/
+ UINT8 SrefCfgEna;
+
+/** Offset 0x0557 - Throttler CKEMin Defeature - LPDDR
+ Enables/Disable Throttler CKEMin Defeature(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeatLpddr;
+
+/** Offset 0x0558 - Throttler CKEMin Defeature
+ Enables/Disable Throttler CKEMin Defeature
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeat;
+
+/** Offset 0x0559 - Enable RH Prevention
+ Enables/Disable RH Prevention
+ $EN_DIS
+**/
+ UINT8 RhPrevention;
+
+/** Offset 0x055A - Exit On Failure (MRC)
+ Enables/Disable Exit On Failure (MRC)
+ $EN_DIS
+**/
+ UINT8 ExitOnFailure;
+
+/** Offset 0x055B - LPDDR Thermal Sensor
+ Enables/Disable LPDDR Thermal Sensor
+ $EN_DIS
+**/
+ UINT8 DdrThermalSensor;
+
+/** Offset 0x055C - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedClock;
+
+/** Offset 0x055D - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedZq;
+
+/** Offset 0x055E
+**/
+ UINT8 UnusedUpdSpace14[2];
+
+/** Offset 0x0560 - Base reference clock value
+ Base reference clock value, in Hertz(Default is 125Hz)
+ 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz
+**/
+ UINT32 BClkFrequency;
+
+/** Offset 0x0564 - Ch Hash Interleaved Bit
+ Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave
+ the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8
+ 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13
+**/
+ UINT8 ChHashInterleaveBit;
+
+/** Offset 0x0565
+**/
+ UINT8 UnusedUpdSpace15;
+
+/** Offset 0x0566 - Ch Hash Mask
+ Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
+ BITS [19:6] Default is 0x30CC
+**/
+ UINT16 ChHashMask;
+
+/** Offset 0x0568 - Extended Bank Hashing
+ Eanble/Disable ExtendedBankHashing
+ $EN_DIS
+**/
+ UINT8 ExtendedBankHashing;
+
+/** Offset 0x0569 - Energy Scale Factor
+ Energy Scale Factor, Default is 4
+**/
+ UINT8 EnergyScaleFact;
+
+/** Offset 0x056A - EPG DIMM Idd3N
+ Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on
+ a per DIMM basis. Default is 26
+**/
+ UINT16 Idd3n;
+
+/** Offset 0x056C - EPG DIMM Idd3P
+ Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated
+ on a per DIMM basis. Default is 11
+**/
+ UINT16 Idd3p;
+
+/** Offset 0x056E - RH Activation Probability
+ RH Activation Probability, Probability value is 1/2^(inputvalue)
+**/
+ UINT8 RhActProbability;
+
+/** Offset 0x056F - RAPL PL 2 WindowX
+ Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim2WindX;
+
+/** Offset 0x0570 - RAPL PL 2 WindowY
+ Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim2WindY;
+
+/** Offset 0x0571 - RAPL PL 1 WindowX
+ Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim1WindX;
+
+/** Offset 0x0572 - RAPL PL 1 WindowY
+ Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim1WindY;
+
+/** Offset 0x0573
+**/
+ UINT8 UnusedUpdSpace16;
+
+/** Offset 0x0574 - RAPL PL 2 Power
+ range[0;2^14-1]= [2047.875;0]in W, (224= Def)
+**/
+ UINT16 RaplLim2Pwr;
+
+/** Offset 0x0576 - RAPL PL 1 Power
+ range[0;2^14-1]= [2047.875;0]in W, (224= Def)
+**/
+ UINT16 RaplLim1Pwr;
+
+/** Offset 0x0578 - Warm Threshold Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh0Dimm0;
+
+/** Offset 0x0579 - Warm Threshold Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh0Dimm1;
+
+/** Offset 0x057A - Warm Threshold Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh1Dimm0;
+
+/** Offset 0x057B - Warm Threshold Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh1Dimm1;
+
+/** Offset 0x057C - Hot Threshold Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh0Dimm0;
+
+/** Offset 0x057D - Hot Threshold Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh0Dimm1;
+
+/** Offset 0x057E - Hot Threshold Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh1Dimm0;
+
+/** Offset 0x057F - Hot Threshold Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh1Dimm1;
+
+/** Offset 0x0580 - Warm Budget Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh0Dimm0;
+
+/** Offset 0x0581 - Warm Budget Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh0Dimm1;
+
+/** Offset 0x0582 - Warm Budget Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh1Dimm0;
+
+/** Offset 0x0583 - Warm Budget Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh1Dimm1;
+
+/** Offset 0x0584 - Hot Budget Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh0Dimm0;
+
+/** Offset 0x0585 - Hot Budget Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh0Dimm1;
+
+/** Offset 0x0586 - Hot Budget Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh1Dimm0;
+
+/** Offset 0x0587 - Hot Budget Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh1Dimm1;
+
+/** Offset 0x0588 - Idle Energy Ch0Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh0Dimm0;
+
+/** Offset 0x0589 - Idle Energy Ch0Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh0Dimm1;
+
+/** Offset 0x058A - Idle Energy Ch1Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh1Dimm0;
+
+/** Offset 0x058B - Idle Energy Ch1Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh1Dimm1;
+
+/** Offset 0x058C - PowerDown Energy Ch0Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
+**/
+ UINT8 PdEnergyCh0Dimm0;
+
+/** Offset 0x058D - PowerDown Energy Ch0Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
+**/
+ UINT8 PdEnergyCh0Dimm1;
+
+/** Offset 0x058E - PowerDown Energy Ch1Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
+**/
+ UINT8 PdEnergyCh1Dimm0;
+
+/** Offset 0x058F - PowerDown Energy Ch1Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
+**/
+ UINT8 PdEnergyCh1Dimm1;
+
+/** Offset 0x0590 - Activate Energy Ch0Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh0Dimm0;
+
+/** Offset 0x0591 - Activate Energy Ch0Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh0Dimm1;
+
+/** Offset 0x0592 - Activate Energy Ch1Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh1Dimm0;
+
+/** Offset 0x0593 - Activate Energy Ch1Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh1Dimm1;
+
+/** Offset 0x0594 - Read Energy Ch0Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh0Dimm0;
+
+/** Offset 0x0595 - Read Energy Ch0Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh0Dimm1;
+
+/** Offset 0x0596 - Read Energy Ch1Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh1Dimm0;
+
+/** Offset 0x0597 - Read Energy Ch1Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh1Dimm1;
+
+/** Offset 0x0598 - Write Energy Ch0Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh0Dimm0;
+
+/** Offset 0x0599 - Write Energy Ch0Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh0Dimm1;
+
+/** Offset 0x059A - Write Energy Ch1Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh1Dimm0;
+
+/** Offset 0x059B - Write Energy Ch1Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh1Dimm1;
+
+/** Offset 0x059C - Throttler CKEMin Timer
+ Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
+ Dfault is 0x30
+**/
+ UINT8 ThrtCkeMinTmr;
+
+/** Offset 0x059D - Cke Rank Mapping
+ Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies
+ which rank CKE[i] goes to.
+**/
+ UINT8 CkeRankMapping;
+
+/** Offset 0x059E - Rapl Power Floor Ch0
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh0;
+
+/** Offset 0x059F - Rapl Power Floor Ch1
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh1;
+
+/** Offset 0x05A0 - Command Rate Support
+ CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs
+ 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS
+**/
+ UINT8 EnCmdRate;
+
+/** Offset 0x05A1 - REFRESH_2X_MODE
+ 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot
+ 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only
+**/
+ UINT8 Refresh2X;
+
+/** Offset 0x05A2 - Energy Performance Gain
+ Enable/disable(default) Energy Performance Gain.
+ $EN_DIS
+**/
+ UINT8 EpgEnable;
+
+/** Offset 0x05A3 - Row Hammer Solution
+ Type of method used to prevent Row Hammer. Default is 2x Refresh
+ 0:Hardware RHP, 1:2x Refresh
+**/
+ UINT8 RhSolution;
+
+/** Offset 0x05A4 - User Manual Threshold
+ Disabled: Predefined threshold will be used.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserThresholdEnable;
+
+/** Offset 0x05A5 - User Manual Budget
+ Disabled: Configuration of memories will defined the Budget value.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserBudgetEnable;
+
+/** Offset 0x05A6 - Power Down Mode
+ This option controls command bus tristating during idle periods
+ 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto
+**/
+ UINT8 PowerDownMode;
+
+/** Offset 0x05A7 - TcritMax
+ Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax
+ has to be greater than THIGHMax .\n
+ Critical temperature will be TcritMax
+**/
+ UINT8 TsodTcritMax;
+
+/** Offset 0x05A8 - Event mode
+ Disable:Comparator mode.\n
+ Enable:Interrupt mode
+ $EN_DIS
+**/
+ UINT8 TsodEventMode;
+
+/** Offset 0x05A9 - EVENT polarity
+ Disable:Active LOW.\n
+ Enable:Active HIGH
+ $EN_DIS
+**/
+ UINT8 TsodEventPolarity;
+
+/** Offset 0x05AA - Critical event only
+ Disable:Trips on alarm or critical.\n
+ Enable:Trips only if criticaal temperature is reached
+ $EN_DIS
+**/
+ UINT8 TsodCriticalEventOnly;
+
+/** Offset 0x05AB - Event output control
+ Disable:Event output disable.\n
+ Enable:Event output enabled
+ $EN_DIS
+**/
+ UINT8 TsodEventOutputControl;
+
+/** Offset 0x05AC - Alarm window lock bit
+ Disable:Alarm trips are not locked and can be changed.\n
+ Enable:Alarm trips are locked and cannot be changed
+ $EN_DIS
+**/
+ UINT8 TsodAlarmwindowLockBit;
+
+/** Offset 0x05AD - Critical trip lock bit
+ Disable:Critical trip is not locked and can be changed.\n
+ Enable:Critical trip is locked and cannot be changed
+ $EN_DIS
+**/
+ UINT8 TsodCriticaltripLockBit;
+
+/** Offset 0x05AE - Shutdown mode
+ Disable:Temperature sensor enable.\n
+ Enable:Temperature sensor disable
+ $EN_DIS
+**/
+ UINT8 TsodShutdownMode;
+
+/** Offset 0x05AF - ThighMax
+ Thigh = ThighMax (Default is 93)
+**/
+ UINT8 TsodThigMax;
+
+/** Offset 0x05B0 - User Manual Thig and Tcrit
+ Disabled(Default): Temperature will be given by the configuration of memories and
+ 1x or 2xrefresh rate.\n
+ Enabled: User Input will define for Thigh and Tcrit.
+ $EN_DIS
+**/
+ UINT8 TsodManualEnable;
+
+/** Offset 0x05B1 - Force OLTM or 2X Refresh when needed
+ Disabled(Default): = Force OLTM.\n
+ Enabled: = Force 2x Refresh.
+ $EN_DIS
+**/
+ UINT8 ForceOltmOrRefresh2x;
+
+/** Offset 0x05B2 - Pwr Down Idle Timer
+ The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
+ AUTO: 64 for ULX/ULT, 128 for DT/Halo
+**/
+ UINT8 PwdwnIdleCounter;
+
+/** Offset 0x05B3 - Page Close Idle Timeout
+ This option controls Page Close Idle Timeout
+ 0:Enabled, 1:Disabled
+**/
+ UINT8 DisPgCloseIdleTimeout;
+
+/** Offset 0x05B4 - Bitmask of ranks that have CA bus terminated
+ Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
+ Rank0 is terminating and Rank1 is non-terminating</b>
+**/
+ UINT8 CmdRanksTerminated;
+
+/** Offset 0x05B5 - RMTLoopCount
+ Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO
+**/
+ UINT8 RMTLoopCount;
+
+/** Offset 0x05B6 - Throttler CKEMin Timer for LPDDR
+ LPDDR Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH
+ (4). Dfault is 0x40
+**/
+ UINT8 ThrtCkeMinTmrLpddr;
+
+/** Offset 0x05B7 - Retrain on Fast Fail
+ Restart MRC in Cold mode if SW MemTest fails during Fast flow. Default = Enabled
+ $EN_DIS
+**/
+ UINT8 RetrainOnFastFail;
+
+/** Offset 0x05B8 - Rank Margin Tool Per Bit
+ Enable/disable Rank Margin Tool Per Bit.
+ $EN_DIS
+**/
+ UINT8 RMTBIT;
+
+/** Offset 0x05B9 - Read Timing Optimization
+ Enables/Disable Read Timing Optimization
+ $EN_DIS
+**/
+ UINT8 RDTOPT;
+
+/** Offset 0x05BA - REFRESH_PANIC_WM
+ Refresh Panic Watermark, range 1-9, Default is 9
+**/
+ UINT8 RefreshPanicWm;
+
+/** Offset 0x05BB - REFRESH_HP_WM
+ Refresh High Priority Watermark, range 1-9, Default is 8
+**/
+ UINT8 RefreshHpWm;
+
+/** Offset 0x05BC - PcdSerialDebugLevel
+ Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
+ Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
+ Info & Verbose.
+ 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
+ Error Warnings and Info, 5:Load Error Warnings Info and Verbose
+**/
+ UINT8 PcdSerialDebugLevel;
+
+/** Offset 0x05BD - Fivr Faults
+ Fivr Faults; 0: Disabled; <b>1: Enabled.</b>
+ $EN_DIS
+**/
+ UINT8 FivrFaults;
+
+/** Offset 0x05BE - Fivr Efficiency
+ Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b>
+ $EN_DIS
+**/
+ UINT8 FivrEfficiency;
+
+/** Offset 0x05BF - Safe Mode Support
+ This option configures the varous items in the IO and MC to be more conservative.(def=Disable)
+ $EN_DIS
+**/
+ UINT8 SafeMode;
+
+/** Offset 0x05C0 - Ask MRC to clear memory content
+ Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory.
+ $EN_DIS
+**/
+ UINT8 CleanMemory;
+
+/** Offset 0x05C1 - TCSS USB Port Enable
+ Bitmap for per port enabling
+**/
+ UINT8 UsbTcPortEnPreMem;
+
+/** Offset 0x05C2 - Post Code Output Port
+ This option configures Post Code Output Port
+**/
+ UINT16 PostCodeOutputPort;
+
+/** Offset 0x05C4 - Enable/Disable SA CRID
+ Enable: SA CRID, Disable (Default): SA CRID
+ $EN_DIS
+**/
+ UINT8 CridEnable;
+
+/** Offset 0x05C5
+**/
+ UINT8 UnusedUpdSpace17[3];
+
+/** Offset 0x05C8 - BCLK RFI Frequency
+ Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No
+ RFI Tuning</b>. Range is 98Mhz-100Mhz.
+**/
+ UINT32 BclkRfiFreq[4];
+
+/** Offset 0x05D8 - Size of PCIe IMR.
+ Size of PCIe IMR in megabytes
+**/
+ UINT16 PcieImrSize;
+
+/** Offset 0x05DA - Enable PCIe IMR
+ 0: Disable(AUTO), 1: Enable
+ $EN_DIS
+**/
+ UINT8 PcieImrEnabled;
+
+/** Offset 0x05DB - Enable PCIe IMR
+ 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select
+ the Root port location from PCH PCIe or SA PCIe
+ $EN_DIS
+**/
+ UINT8 PcieImrRpLocation;
+
+/** Offset 0x05DC - Root port number for IMR.
+ Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port
+ from 0 to 23 and if it is SA PCIe then select root port from 0 to 3
+**/
+ UINT8 PcieImrRpSelection;
+
+/** Offset 0x05DD - Mem Boot Mode
+ 0: BOOT_MODE_1LM(Default), 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION
+ 0: BOOT_MODE_1LM, 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION
+**/
+ UINT8 MemBootMode;
+
+/** Offset 0x05DE - PCIe ASPM programming will happen in relation to the Oprom
+ This option is specifically needed for ASPM configuration in 2LM feature
+ 0:Disabled, 1:L0, 2:L1, 3:L0L1, 4:Auto
+**/
+ UINT8 Peg3Aspm;
+
+/** Offset 0x05DF - MFVC WRR VC Arbitration
+ 0: DEFAULT_PHASES(Default), 1: PROGRAM_128PHASES
+ 0: DEFAULT_PHASES, 1: PROGRAM_128PHASES
+**/
+ UINT8 MfvcWrrArb;
+
+/** Offset 0x05E0 - VcId_7_0 values
+ Select VC ID for arbitration
+**/
+ UINT8 VcId_7_0[16];
+
+/** Offset 0x05F0 - Set Hw Parameters enable/disable
+ 1: enable, 0: disable, Enable/disable setting of HW parameters
+ $EN_DIS
+**/
+ UINT8 SetHwParameters;
+
+/** Offset 0x05F1
+**/
+ UINT8 UnusedUpdSpace18;
+
+/** Offset 0x05F2 - LTR L1.2 Threshold Value
+ LTR L1.2 Threshold Value
+**/
+ UINT16 Ltr_L1D2_ThVal;
+
+/** Offset 0x05F4 - LTR L1.2 Threshold Scale
+ LTR L1.2 Threshold Scale
+**/
+ UINT8 Ltr_L1D2_ThScale;
+
+/** Offset 0x05F5 - system power state
+ system power state indicates the platform power state
+**/
+ UINT8 SysPwrState;
+
+/** Offset 0x05F6 - Media Death Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Media Death Notification
+ $EN_DIS
+**/
+ UINT8 MediaDeathNotification;
+
+/** Offset 0x05F7 - Health Log Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Health Log Notification
+ $EN_DIS
+**/
+ UINT8 HealthLogNotification;
+
+/** Offset 0x05F8 - Temp crosses below TempThrottle Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Temp crosses below TempThrottle Notification
+ $EN_DIS
+**/
+ UINT8 TempBelowThrottleNotification;
+
+/** Offset 0x05F9 - Temp crosses above TempThrottle Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Temp crosses above TempThrottle Notification
+ $EN_DIS
+**/
+ UINT8 TempAboveThrottleNotification;
+
+/** Offset 0x05FA - Missing Commit Bit Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Missing Commit Bit Notification
+ $EN_DIS
+**/
+ UINT8 MissingCommitBitNotification;
+
+/** Offset 0x05FB - NVMeHoldDisableBit
+ 1: enable, 0: disable, Enable/disable for NVMeHoldDisableBit
+ $EN_DIS
+**/
+ UINT8 NVMeHoldDisableBit;
+
+/** Offset 0x05FC - PreMemRsvd
+ Reserved for Pre-Mem
+ $EN_DIS
+**/
+ UINT8 ReservedFspmUpd[18];
+
+/** Offset 0x060E - Skip external display device scanning
+ Enable: Do not scan for external display device, Disable (Default): Scan external
+ display devices
+ $EN_DIS
+**/
+ UINT8 SkipExtGfxScan;
+
+/** Offset 0x060F - Generate BIOS Data ACPI Table
+ Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it
+ $EN_DIS
+**/
+ UINT8 BdatEnable;
+
+/** Offset 0x0610 - Detect External Graphics device for LegacyOpROM
+ Detect and report if external graphics device only support LegacyOpROM or not (to
+ support CSM auto-enable). Enable(Default)=1, Disable=0
+ $EN_DIS
+**/
+ UINT8 ScanExtGfxForLegacyOpRom;
+
+/** Offset 0x0611 - Lock PCU Thermal Management registers
+ Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0
+ $EN_DIS
+**/
+ UINT8 LockPTMregs;
+
+/** Offset 0x0612 - Rsvd
+ Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1):
+ Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE
+ peak values unmodified
+ $EN_DIS
+**/
+ UINT8 PegGen3Rsvd;
+
+/** Offset 0x0613 - Panel Power Enable
+ Control for enabling/disabling VDD force bit (Required only for early enabling of
+ eDP panel). 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 PanelPowerEnable;
+
+/** Offset 0x0614 - BdatTestType
+ Indicates the type of Memory Training data to populate into the BDAT ACPI table.
+ 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D
+**/
+ UINT8 BdatTestType;
+
+/** Offset 0x0615 - SaPreMemTestRsvd
+ Reserved for SA Pre-Mem Test
+ $EN_DIS
+**/
+ UINT8 SaPreMemTestRsvd[98];
+
+/** Offset 0x0677
+**/
+ UINT8 UnusedUpdSpace19;
+
+/** Offset 0x0678 - TotalFlashSize
+ Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable
+**/
+ UINT16 TotalFlashSize;
+
+/** Offset 0x067A - BiosSize
+ Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable
+**/
+ UINT16 BiosSize;
+
+/** Offset 0x067C - TxtAcheckRequest
+ Enable/Disable. When Enabled, it will forcing calling TXT Acheck once.
+ $EN_DIS
+**/
+ UINT8 TxtAcheckRequest;
+
+/** Offset 0x067D - SecurityTestRsvd
+ Reserved for SA Pre-Mem Test
+ $EN_DIS
+**/
+ UINT8 SecurityTestRsvd[11];
+
+/** Offset 0x0688 - Smbus dynamic power gating
+ Disable or Enable Smbus dynamic power gating.
+ $EN_DIS
+**/
+ UINT8 SmbusDynamicPowerGating;
+
+/** Offset 0x0689 - Disable and Lock Watch Dog Register
+ Set 1 to clear WDT status, then disable and lock WDT registers.
+ $EN_DIS
+**/
+ UINT8 WdtDisableAndLock;
+
+/** Offset 0x068A - SMBUS SPD Write Disable
+ Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write
+ Disable bit. For security recommendations, SPD write disable bit must be set.
+ $EN_DIS
+**/
+ UINT8 SmbusSpdWriteDisable;
+
+/** Offset 0x068B - VC Type
+ Virtual Channel Type Select: 0: VC0, 1: VC1.
+ 0: VC0, 1: VC1
+**/
+ UINT8 PchHdaVcType;
+
+/** Offset 0x068C - Universal Audio Architecture compliance for DSP enabled system
+ 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
+ driver or SST driver supported).
+ $EN_DIS
+**/
+ UINT8 PchHdaDspUaaCompliance;
+
+/** Offset 0x068D - Enable HD Audio Link
+ Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkHdaEnable;
+
+/** Offset 0x068E - Enable HDA SDI lanes
+ Enable/disable HDA SDI lanes.
+**/
+ UINT8 PchHdaSdiEnable[2];
+
+/** Offset 0x0690 - HDA Power/Clock Gating (PGD/CGD)
+ Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1:
+ FORCE_ENABLE, 2: FORCE_DISABLE.
+ 0: POR, 1: Force Enable, 2: Force Disable
+**/
+ UINT8 PchHdaTestPowerClockGating;
+
+/** Offset 0x0691 - Enable HD Audio DMIC_N Link
+ Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
+**/
+ UINT8 PchHdaAudioLinkDmicEnable[2];
+
+/** Offset 0x0693
+**/
+ UINT8 UnusedUpdSpace20[1];
+
+/** Offset 0x0694 - DMIC<N> ClkA Pin Muxing (N - DMIC number)
+ Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_*
+**/
+ UINT32 PchHdaAudioLinkDmicClkAPinMux[2];
+
+/** Offset 0x069C - DMIC<N> ClkB Pin Muxing
+ Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_*
+**/
+ UINT32 PchHdaAudioLinkDmicClkBPinMux[2];
+
+/** Offset 0x06A4 - Enable HD Audio DSP
+ Enable/disable HD Audio DSP feature.
+ $EN_DIS
+**/
+ UINT8 PchHdaDspEnable;
+
+/** Offset 0x06A5
+**/
+ UINT8 UnusedUpdSpace21[3];
+
+/** Offset 0x06A8 - DMIC<N> Data Pin Muxing
+ Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_*
+**/
+ UINT32 PchHdaAudioLinkDmicDataPinMux[2];
+
+/** Offset 0x06B0 - Enable HD Audio SSP0 Link
+ Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5
+**/
+ UINT8 PchHdaAudioLinkSspEnable[6];
+
+/** Offset 0x06B6 - Enable HD Audio SoundWire#N Link
+ Enable/disable HD Audio SNDW#N link. Muxed with HDA.
+**/
+ UINT8 PchHdaAudioLinkSndwEnable[4];
+
+/** Offset 0x06BA - iDisp-Link Frequency
+ iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
+ 4: 96MHz, 3: 48MHz
+**/
+ UINT8 PchHdaIDispLinkFrequency;
+
+/** Offset 0x06BB - iDisp-Link T-mode
+ iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T
+ 0: 2T, 2: 4T, 3: 8T, 4: 16T
+**/
+ UINT8 PchHdaIDispLinkTmode;
+
+/** Offset 0x06BC - iDisplay Audio Codec disconnection
+ 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
+ $EN_DIS
+**/
+ UINT8 PchHdaIDispCodecDisconnect;
+
+/** Offset 0x06BD - Tcc Tuning enable/disable
+ Tcc (Time Coordinated Computing) Tuning Enabled
+ $EN_DIS
+**/
+ UINT8 TccTuningEnable;
+
+/** Offset 0x06BE
+**/
+ UINT8 UnusedUpdSpace22[2];
+
+/** Offset 0x06C0 - Tcc Register File Base Address
+ Tcc (Time Coordinated Computing) Register File Base Address
+**/
+ UINT32 TccConfigBase;
+
+/** Offset 0x06C4 - Tcc Register File Size
+ Tcc (Time Coordinated Computing) Register File Size
+**/
+ UINT32 TccConfigSize;
+
+/** Offset 0x06C8 - Force ME DID Init Status
+ Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set
+ ME DID init stat value
+ $EN_DIS
+**/
+ UINT8 DidInitStat;
+
+/** Offset 0x06C9 - CPU Replaced Polling Disable
+ Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop
+ $EN_DIS
+**/
+ UINT8 DisableCpuReplacedPolling;
+
+/** Offset 0x06CA - ME DID Message
+ Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent
+ the DID message from being sent)
+ $EN_DIS
+**/
+ UINT8 SendDidMsg;
+
+/** Offset 0x06CB - Check HECI message before send
+ Test, 0: disable, 1: enable, Enable/Disable message check.
+ $EN_DIS
+**/
+ UINT8 DisableMessageCheck;
+
+/** Offset 0x06CC - Skip MBP HOB
+ Test, 0: disable, 1: enable, Enable/Disable MOB HOB.
+ $EN_DIS
+**/
+ UINT8 SkipMbpHob;
+
+/** Offset 0x06CD - HECI2 Interface Communication
+ Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space.
+ $EN_DIS
+**/
+ UINT8 HeciCommunication2;
+
+/** Offset 0x06CE - Enable KT device
+ Test, 0: disable, 1: enable, Enable or Disable KT device.
+ $EN_DIS
+**/
+ UINT8 KtDeviceEnable;
+
+/** Offset 0x06CF
+**/
+ UINT8 UnusedUpdSpace23[5];
+
+/** Offset 0x06D4
+**/
+ UINT8 ReservedFspmUpd2[20];
+} FSP_M_CONFIG;
+
+/** Fsp M UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSPM_ARCH_UPD FspmArchUpd;
+
+/** Offset 0x0040
+**/
+ FSP_M_CONFIG FspmConfig;
+
+/** Offset 0x06E8
+**/
+ UINT8 UnusedUpdSpace24[6];
+
+/** Offset 0x06EE
+**/
+ UINT16 UpdTerminator;
+} FSPM_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspsUpd.h new file mode 100644 index 0000000000..641081fe03 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FspsUpd.h @@ -0,0 +1,4837 @@ +/** @file
+
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPSUPD_H__
+#define __FSPSUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+///
+/// Azalia Header structure
+///
+typedef struct {
+ UINT16 VendorId; ///< Codec Vendor ID
+ UINT16 DeviceId; ///< Codec Device ID
+ UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision.
+ UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI.
+ UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer.
+ UINT32 Reserved; ///< Reserved for future use. Must be set to 0.
+} AZALIA_HEADER;
+
+///
+/// Audio Azalia Verb Table structure
+///
+typedef struct {
+ AZALIA_HEADER Header; ///< AZALIA PCH header
+ UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header
+} AUDIO_AZALIA_VERB_TABLE;
+
+///
+/// Refer to the definition of PCH_INT_PIN
+///
+typedef enum {
+ SiPchNoInt, ///< No Interrupt Pin
+ SiPchIntA,
+ SiPchIntB,
+ SiPchIntC,
+ SiPchIntD
+} SI_PCH_INT_PIN;
+///
+/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device.
+///
+typedef struct {
+ UINT8 Device; ///< Device number
+ UINT8 Function; ///< Device function
+ UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN)
+ UINT8 Irq; ///< IRQ to be set for device.
+} SI_PCH_DEVICE_INTERRUPT_CONFIG;
+
+#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices
+
+
+/** Fsp S Configuration
+**/
+typedef struct {
+
+/** Offset 0x0020 - Logo Pointer
+ Points to PEI Display Logo Image
+**/
+ UINT32 LogoPtr;
+
+/** Offset 0x0024 - Logo Size
+ Size of PEI Display Logo Image
+**/
+ UINT32 LogoSize;
+
+/** Offset 0x0028 - Blt Buffer Address
+ Address of Blt buffer
+**/
+ UINT32 BltBufferAddress;
+
+/** Offset 0x002C - Blt Buffer Size
+ Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+**/
+ UINT32 BltBufferSize;
+
+/** Offset 0x0030 - Graphics Configuration Ptr
+ Points to VBT
+**/
+ UINT32 GraphicsConfigPtr;
+
+/** Offset 0x0034 - Enable Device 4
+ Enable/disable Device 4
+ $EN_DIS
+**/
+ UINT8 Device4Enable;
+
+/** Offset 0x0035 - Enable eMMC Controller
+ Enable/disable eMMC Controller.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcEnabled;
+
+/** Offset 0x0036 - Enable eMMC HS400 Mode
+ Enable eMMC HS400 Mode.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcHs400Enabled;
+
+/** Offset 0x0037 - Enable eMMC DDR50 Mode
+ Enable eMMC DDR50 Mode.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcDdr50Enabled;
+
+/** Offset 0x0038 - Use DLL values from policy
+ Set if FSP should use HS400 DLL values from policy
+ $EN_DIS
+**/
+ UINT8 EmmcUseCustomDlls;
+
+/** Offset 0x0039
+**/
+ UINT8 UnusedUpdSpace0[3];
+
+/** Offset 0x003C - Emmc Tx CMD Delay control register value
+ Please see Tx CMD Delay Control register definition for help
+**/
+ UINT32 EmmcTxCmdDelayRegValue;
+
+/** Offset 0x0040 - Emmc Tx DATA Delay control 1 register value
+ Please see Tx DATA Delay control 1 register definition for help
+**/
+ UINT32 EmmcTxDataDelay1RegValue;
+
+/** Offset 0x0044 - Emmc Tx DATA Delay control 2 register value
+ Please see Tx DATA Delay control 2 register definition for help
+**/
+ UINT32 EmmcTxDataDelay2RegValue;
+
+/** Offset 0x0048 - Emmc Rx CMD + DATA Delay control 1 register value
+ Please see Rx CMD + DATA Delay control 1 register definition for help
+**/
+ UINT32 EmmcRxCmdDataDelay1RegValue;
+
+/** Offset 0x004C - Emmc Rx CMD + DATA Delay control 2 register value
+ Please see Rx CMD + DATA Delay control 2 register definition for help
+**/
+ UINT32 EmmcRxCmdDataDelay2RegValue;
+
+/** Offset 0x0050 - Emmc Rx Strobe Delay control register value
+ Please see Rx Strobe Delay control register definition for help
+**/
+ UINT32 EmmcRxStrobeDelayRegValue;
+
+/** Offset 0x0054 - Enable SdCard Controller
+ Enable/disable SD Card Controller.
+ $EN_DIS
+**/
+ UINT8 ScsSdCardEnabled;
+
+/** Offset 0x0055 - SdCard power enable polarity
+ Choose SD_PWREN# polarity
+ 0: Active low, 1: Active high
+**/
+ UINT8 SdCardPowerEnableActiveHigh;
+
+/** Offset 0x0056 - Use tuned DLL values from policy
+ Set if FSP should use HS400 DLL values from policy
+ $EN_DIS
+**/
+ UINT8 SdCardUseCustomDlls;
+
+/** Offset 0x0057
+**/
+ UINT8 UnusedUpdSpace1;
+
+/** Offset 0x0058 - SdCard Tx CMD Delay control register value
+ Please see Tx CMD Delay Control register definition for help
+**/
+ UINT32 SdCardTxCmdDelayRegValue;
+
+/** Offset 0x005C - SdCard Tx DATA Delay control 1 register value
+ Please see Tx DATA Delay control 1 register definition for help
+**/
+ UINT32 SdCardTxDataDelay1RegValue;
+
+/** Offset 0x0060 - SdCard Tx DATA Delay control 2 register value
+ Please see Tx DATA Delay control 2 register definition for help
+**/
+ UINT32 SdCardTxDataDelay2RegValue;
+
+/** Offset 0x0064 - SdCard Rx CMD + DATA Delay control 1 register value
+ Please see Rx CMD + DATA Delay control 1 register definition for help
+**/
+ UINT32 SdCardRxCmdDataDelay1RegValue;
+
+/** Offset 0x0068 - SdCard Rx CMD + DATA Delay control 2 register value
+ Please see Rx CMD + DATA Delay control 2 register definition for help
+**/
+ UINT32 SdCardRxCmdDataDelay2RegValue;
+
+/** Offset 0x006C - SdCard Power Enable Pin Mux
+ Select Power Enable pin muxing. Refer to GPIO_*_MUXING_SDCARD_PWR_EN* for possible values.
+**/
+ UINT32 SdCardGpioPrwEnBPinMux;
+
+/** Offset 0x0070 - SdCard Power Enable Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 SdCardGpioPrwEnBPadTermination;
+
+/** Offset 0x0071
+**/
+ UINT8 UnusedUpdSpace2[3];
+
+/** Offset 0x0074 - SdCard Command Pin Mux
+ Select Command pin muxing. Refer to GPIO_*_MUXING_SDCARD_CMD* for possible values.
+**/
+ UINT32 SdCardGpioCmdPinMux;
+
+/** Offset 0x0078 - SdCard Command Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 SdCardGpioCmdPadTermination;
+
+/** Offset 0x0079
+**/
+ UINT8 UnusedUpdSpace3[3];
+
+/** Offset 0x007C - SdCard Data Pin Mux
+ Select Data pin muxing. Refer to GPIO_*_MUXING_SDCARD_DATAx_* for possible values.
+ One UINT32 for each data pin [0-4]
+**/
+ UINT32 SdCardGpioDataPinMux[4];
+
+/** Offset 0x008C - SdCard Data Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up. One byte for each data pin [0-4]
+**/
+ UINT8 SdCardGpioDataPadTermination[4];
+
+/** Offset 0x0090 - SdCard Cdb Pin Mux
+ Select Cdb pin muxing. Refer to GPIO_*_MUXING_SDCARD_CDB* for possible values.
+**/
+ UINT32 SdCardGpioCdbPinMux;
+
+/** Offset 0x0094 - SdCard Cdb Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 SdCardGpioCdbPadTermination;
+
+/** Offset 0x0095
+**/
+ UINT8 UnusedUpdSpace4[3];
+
+/** Offset 0x0098 - SdCard Clock Pin Mux
+ Select Clock pin muxing. Refer to GPIO_*_MUXING_SDCARD_CLK* for possible values.
+**/
+ UINT32 SdCardGpioClkPinMux;
+
+/** Offset 0x009C - SdCard Clock Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 SdCardGpioClkPadTermination;
+
+/** Offset 0x009D
+**/
+ UINT8 UnusedUpdSpace5[3];
+
+/** Offset 0x00A0 - SdCard Wp PinMux
+ Select Wp pin muxing. Refer to GPIO_*_MUXING_SDCARD_WP* for possible values.
+**/
+ UINT32 SdCardGpioWpPinMux;
+
+/** Offset 0x00A4 - SdCard Wp Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 SdCardGpioWpPadTermination;
+
+/** Offset 0x00A5
+**/
+ UINT8 UnusedUpdSpace6[3];
+
+/** Offset 0x00A8 - SdCard Clock Feedback Pin Mux
+ Select pin muxing. Refer to GPIO_*_MUXING_SDCARD_CLK_FB* for possible values.
+**/
+ UINT32 SdCardGpioClkFbPinMux;
+
+/** Offset 0x00AC - SdCard Clock Feedback Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 SdCardGpioClkFbPadTermination;
+
+/** Offset 0x00AD
+**/
+ UINT8 UnusedUpdSpace7[3];
+
+/** Offset 0x00B0 - Emmc Command Pin Mux
+ Select pin muxing. Refer to GPIO_*_MUXING_EMMC_CMD* for possible values.
+**/
+ UINT32 EmmcGpioCmdPinMux;
+
+/** Offset 0x00B4 - Emmc Command Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 EmmcGpioCmdPadTermination;
+
+/** Offset 0x00B5 - Emmc Data Pin Mux
+ Select pin muxing. Refer to GPIO_*_MUXING_EMMC_DATA_x* for possible values. One
+ UINT32 for each data pin [0-8]
+**/
+ UINT8 EmmcGpioDataPinMux[32];
+
+/** Offset 0x00D5 - Emmc Data Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up. One byte for each data pin [0-8]
+**/
+ UINT8 EmmcGpioDataPadTermination[8];
+
+/** Offset 0x00DD
+**/
+ UINT8 UnusedUpdSpace8[3];
+
+/** Offset 0x00E0 - Emmc Rclk PinMux
+ Select Rclk pin muxing. Refer to GPIO_*_MUXING_EMMC_RCLK* for possible values.
+**/
+ UINT32 EmmcGpioRclkPinMux;
+
+/** Offset 0x00E4 - Emmc Rclk Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 EmmcGpioRclkPadTermination;
+
+/** Offset 0x00E5
+**/
+ UINT8 UnusedUpdSpace9[3];
+
+/** Offset 0x00E8 - Emmc Clock Pin Mux
+ Select Clock pin muxing. Refer to GPIO_*_MUXING_EMMC_CLK* for possible values.
+**/
+ UINT32 EmmcGpioClkPinMux;
+
+/** Offset 0x00EC - Emmc Clock Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 EmmcGpioClkPadTermination;
+
+/** Offset 0x00ED
+**/
+ UINT8 UnusedUpdSpace10[3];
+
+/** Offset 0x00F0 - Emmc Resetb PinMux
+ Select Resetb pin muxing. Refer to GPIO_*_MUXING_EMMC_RESETB* for possible values.
+**/
+ UINT32 EmmcGpioResetbPinMux;
+
+/** Offset 0x00F4 - Emmc Resetb Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 EmmcGpioResetbPadTermination;
+
+/** Offset 0x00F5
+**/
+ UINT8 UnusedUpdSpace11[3];
+
+/** Offset 0x00F8 - Emmc HipMon PinMux
+ Select HipMon pin muxing. Refer to GPIO_*_MUXING_EMMC_HIP_MON* for possible values.
+**/
+ UINT32 EmmcGpioHipMonPinMux;
+
+/** Offset 0x00FC - Emmc HipMon Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 EmmcGpioHipMonPadTermination;
+
+/** Offset 0x00FD - Show SPI controller
+ Enable/disable to show SPI controller.
+ $EN_DIS
+**/
+ UINT8 ShowSpiController;
+
+/** Offset 0x00FE
+**/
+ UINT8 UnusedUpdSpace12[2];
+
+/** Offset 0x0100 - MicrocodeRegionBase
+ Memory Base of Microcode Updates
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x0104 - MicrocodeRegionSize
+ Size of Microcode Updates
+**/
+ UINT32 MicrocodeRegionSize;
+
+/** Offset 0x0108 - SiipRegionBase
+ Memory Base of Siip Firmware
+**/
+ UINT32 SiipRegionBase;
+
+/** Offset 0x010C - SiipRegionSize
+ Size of Siip Firmware
+**/
+ UINT32 SiipRegionSize;
+
+/** Offset 0x0110 - Turbo Mode
+ Enable/Disable Turbo mode. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 TurboMode;
+
+/** Offset 0x0111 - Enable SATA SALP Support
+ Enable/disable SATA Aggressive Link Power Management.
+ $EN_DIS
+**/
+ UINT8 SataSalpSupport;
+
+/** Offset 0x0112 - PCH Sata Port Multiplier
+ Enable / Disable SATA Port Multiplier
+ $EN_DIS
+**/
+ UINT8 SataPortMultiplier;
+
+/** Offset 0x0113 - Enable SATA ports
+ Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1,
+ and so on.
+**/
+ UINT8 SataPortsEnable[8];
+
+/** Offset 0x011B - Enable SATA DEVSLP Feature
+ Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each
+ port, byte0 for port0, byte1 for port1, and so on.
+**/
+ UINT8 SataPortsDevSlp[8];
+
+/** Offset 0x0123 - Enable USB2 ports
+ Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb20Enable[16];
+
+/** Offset 0x0133 - Enable USB2 ports OTG
+ Selectively Enable/Disable USB2 OTG Mode. One byte for each port, byte0 for port0,
+ byte1 for port1, and so on.
+**/
+ UINT8 USB20Otg[16];
+
+/** Offset 0x0143 - Enable USB3 ports OTG
+ Selectively Enable/Disable USB3 OTG Mode. One byte for each port, byte0 for port0,
+ byte1 for port1, and so on.
+**/
+ UINT8 USB30Otg[10];
+
+/** Offset 0x014D - Enable USB3 ports
+ Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb30Enable[10];
+
+/** Offset 0x0157 - Enable xDCI controller
+ Enable/disable to xDCI controller.
+ $EN_DIS
+**/
+ UINT8 XdciEnable;
+
+/** Offset 0x0158 - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
+ The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
+**/
+ UINT32 DevIntConfigPtr;
+
+/** Offset 0x015C - Number of DevIntConfig Entry
+ Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
+ must not be NULL.
+**/
+ UINT8 NumOfDevIntConfig;
+
+/** Offset 0x015D - PIRQx to IRQx Map Config
+ PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
+ PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
+ 8259 PCI mode.
+**/
+ UINT8 PxRcConfig[8];
+
+/** Offset 0x0165 - Select GPIO IRQ Route
+ GPIO IRQ Select. The valid value is 14 or 15.
+**/
+ UINT8 GpioIrqRoute;
+
+/** Offset 0x0166 - Select SciIrqSelect
+ SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
+**/
+ UINT8 SciIrqSelect;
+
+/** Offset 0x0167 - Select TcoIrqSelect
+ TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
+**/
+ UINT8 TcoIrqSelect;
+
+/** Offset 0x0168 - Enable/Disable Tco IRQ
+ Enable/disable TCO IRQ
+ $EN_DIS
+**/
+ UINT8 TcoIrqEnable;
+
+/** Offset 0x0169 - PCH HDA Verb Table Entry Number
+ Number of Entries in Verb Table.
+**/
+ UINT8 PchHdaVerbTableEntryNum;
+
+/** Offset 0x016A
+**/
+ UINT8 UnusedUpdSpace13[2];
+
+/** Offset 0x016C - PCH HDA Verb Table Pointer
+ Pointer to Array of pointers to Verb Table.
+**/
+ UINT32 PchHdaVerbTablePtr;
+
+/** Offset 0x0170 - PCH HDA Codec Sx Wake Capability
+ Capability to detect wake initiated by a codec in Sx
+**/
+ UINT8 PchHdaCodecSxWakeCapability;
+
+/** Offset 0x0171 - Enable SATA
+ Enable/disable SATA controller.
+ $EN_DIS
+**/
+ UINT8 SataEnable;
+
+/** Offset 0x0172 - SATA Mode
+ Select SATA controller working mode.
+ 0:AHCI, 1:RAID
+**/
+ UINT8 SataMode;
+
+/** Offset 0x0173 - SPIn Device Mode
+ Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available
+ modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden
+**/
+ UINT8 SerialIoSpiMode[7];
+
+/** Offset 0x017A - SPI<N> Chip Select Polarity
+ Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow,
+ 1:SerialIoSpiCsActiveHigh
+**/
+ UINT8 SerialIoSpiCsPolarity[14];
+
+/** Offset 0x0188 - SPI<N> Chip Select Enable
+ 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
+**/
+ UINT8 SerialIoSpiCsEnable[14];
+
+/** Offset 0x0196 - SPIn Default Chip Select Output
+ Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available
+ options: 0:CS0, 1:CS1
+**/
+ UINT8 SerialIoSpiDefaultCsOutput[7];
+
+/** Offset 0x019D - SPIn Default Chip Select Mode HW/SW
+ Sets Default CS Mode Hardware or Software. N represents controller index: SPI0,
+ SPI1, ... Available options: 0:HW, 1:SW
+**/
+ UINT8 SerialIoSpiCsMode[7];
+
+/** Offset 0x01A4 - SPIn Default Chip Select State Low/High
+ Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ...
+ Available options: 0:Low, 1:High
+**/
+ UINT8 SerialIoSpiCsState[7];
+
+/** Offset 0x01AB - SPIn Master Input Slave Output Enable/Disable
+ 0:Disabled, 1:Enabled. Sets Native Mode for SPIx MISO GPIO if it is Enabled
+**/
+ UINT8 SerialIoSpiMisoEnable[3];
+
+/** Offset 0x01AE - SPIn Delayed Rx Clock setting
+ 00:As-is, 01:Internal, 10:NegEdge Tx Clock, 11:NegEdge Delayed Rx Clk. Configure
+ Delayed Rx Clock
+**/
+ UINT8 SerialIoSpiDelayRxClk[3];
+
+/** Offset 0x01B1 - UARTn Device Mode
+ Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available
+ modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
+ 4:SerialIoUartSkipInit
+**/
+ UINT8 SerialIoUartMode[7];
+
+/** Offset 0x01B8 - Default BaudRate for each Serial IO UART
+ Set default BaudRate Supported from 0 - default to 6000000
+**/
+ UINT32 SerialIoUartBaudRate[7];
+
+/** Offset 0x01D4 - Default ParityType for each Serial IO UART
+ Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartParity[7];
+
+/** Offset 0x01DB - Default DataBits for each Serial IO UART
+ Set default word length. 0: Default, 5,6,7,8
+**/
+ UINT8 SerialIoUartDataBits[7];
+
+/** Offset 0x01E2 - Default StopBits for each Serial IO UART
+ Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3:
+ TwoStopBits
+**/
+ UINT8 SerialIoUartStopBits[7];
+
+/** Offset 0x01E9 - Power Gating mode for each Serial IO UART that works in COM mode
+ Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto
+**/
+ UINT8 SerialIoUartPowerGating[7];
+
+/** Offset 0x01F0 - Enable Dma for each Serial IO UART that supports it
+ Set DMA/PIO mode. 0: Disabled, 1: Enabled
+**/
+ UINT8 SerialIoUartDmaEnable[7];
+
+/** Offset 0x01F7 - Enables UART hardware flow control, CTS and RTS lines
+ Enables UART hardware flow control, CTS and RTS lines.
+**/
+ UINT8 SerialIoUartAutoFlow[7];
+
+/** Offset 0x01FE
+**/
+ UINT8 UnusedUpdSpace14[2];
+
+/** Offset 0x0200 - SerialIoUartRtsPinMuxPolicy
+ Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartRtsPinMuxPolicy[7];
+
+/** Offset 0x021C - SerialIoUartCtsPinMuxPolicy
+ Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartCtsPinMuxPolicy[7];
+
+/** Offset 0x0238 - SerialIoUartRxPinMuxPolicy
+ Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for
+ possible values.
+**/
+ UINT32 SerialIoUartRxPinMuxPolicy[7];
+
+/** Offset 0x0254 - SerialIoUartTxPinMuxPolicy
+ Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for
+ possible values.
+**/
+ UINT32 SerialIoUartTxPinMuxPolicy[7];
+
+/** Offset 0x0270 - UART Number For Debug Purpose
+ UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5,
+ 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used
+ for debug purpose.
+ 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6
+**/
+ UINT8 SerialIoDebugUartNumber;
+
+/** Offset 0x0271 - Serial IO UART DBG2 table
+ Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b>
+ 1: Enable.
+**/
+ UINT8 SerialIoUartDbg2[7];
+
+/** Offset 0x0278 - I2Cn Device Mode
+ Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available
+ modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden
+**/
+ UINT8 SerialIoI2cMode[8];
+
+/** Offset 0x0280 - Serial IO I2C SDA Pin Muxing
+ Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for
+ possible values.
+**/
+ UINT32 PchSerialIoI2cSdaPinMux[8];
+
+/** Offset 0x02A0 - Serial IO I2C SCL Pin Muxing
+ Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for
+ possible values.
+**/
+ UINT32 PchSerialIoI2cSclPinMux[8];
+
+/** Offset 0x02C0 - PCH SerialIo I2C Pads Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination
+ respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on.
+ 0x1:None, 0x13:1kOhm WPU, 0x15:5kOhm WPU, 0x19:20kOhm WPU
+**/
+ UINT8 PchSerialIoI2cPadsTermination[8];
+
+/** Offset 0x02C8 - USB Per Port HS Preemphasis Bias
+ USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port.
+**/
+ UINT8 Usb2PhyPetxiset[16];
+
+/** Offset 0x02D8 - USB Per Port HS Transmitter Bias
+ USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port.
+**/
+ UINT8 Usb2PhyTxiset[16];
+
+/** Offset 0x02E8 - USB Per Port HS Transmitter Emphasis
+ USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
+ 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
+**/
+ UINT8 Usb2PhyPredeemp[16];
+
+/** Offset 0x02F8 - USB Per Port Half Bit Pre-emphasis
+ USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
+ One byte for each port.
+**/
+ UINT8 Usb2PhyPehalfbit[16];
+
+/** Offset 0x0308 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
+ Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmphEnable[10];
+
+/** Offset 0x0312 - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
+ USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16],
+ <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmph[10];
+
+/** Offset 0x031C - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
+ Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmpEnable[10];
+
+/** Offset 0x0326 - USB 3.0 TX Output Downscale Amplitude Adjustment
+ USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default
+ = 00h</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmp[10];
+
+/** Offset 0x0330
+**/
+ UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10];
+
+/** Offset 0x033A
+**/
+ UINT8 PchUsb3HsioFilterSelNEnable[10];
+
+/** Offset 0x0344
+**/
+ UINT8 PchUsb3HsioFilterSelPEnable[10];
+
+/** Offset 0x034E
+**/
+ UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10];
+
+/** Offset 0x0358
+**/
+ UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10];
+
+/** Offset 0x0362
+**/
+ UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10];
+
+/** Offset 0x036C
+**/
+ UINT8 PchUsb3HsioFilterSelN[10];
+
+/** Offset 0x0376
+**/
+ UINT8 PchUsb3HsioFilterSelP[10];
+
+/** Offset 0x0380 - Enable LAN
+ Enable/disable LAN controller.
+ $EN_DIS
+**/
+ UINT8 PchLanEnable;
+
+/** Offset 0x0381 - Enable PCH TSN
+ Enable/disable TSN on the PCH.
+ $EN_DIS
+**/
+ UINT8 PchTsnEnable;
+
+/** Offset 0x0382 - PCH TSN Multi VC Enable
+ Enable/Disable PCH TSN GBE Multiple Virtual Channel
+ $EN_DIS
+**/
+ UINT8 PchTsnGbeMultiVcEnable;
+
+/** Offset 0x0383 - PCH TSN Link Speed
+ Set PCH TSN Link Speed.
+ 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps
+**/
+ UINT8 PchTsnGbeLinkSpeed;
+
+/** Offset 0x0384 - PCH TSN SGMII Support
+ Enable/disable SGMII support
+ $EN_DIS
+**/
+ UINT8 PchTsnGbeSgmiiEnable;
+
+/** Offset 0x0385 - PSE TSN Multi VC Enable
+ Enable/Disable PSE TSN GBE Multiple Virtual Channel
+ $EN_DIS
+**/
+ UINT8 PseTsnGbeMultiVcEnable[2];
+
+/** Offset 0x0387 - PSE TSN Link Speed
+ Set TSN Link Speed.
+ 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps
+**/
+ UINT8 PseTsnGbeLinkSpeed[2];
+
+/** Offset 0x0389 - PSE TSN SGMII Support
+ Enable/disable SGMII support
+ $EN_DIS
+**/
+ UINT8 PseTsnGbeSgmiiEnable[2];
+
+/** Offset 0x038B - PSE TSN Phy Interface Type
+ Set PSE TSN Phy Interface Type
+ 0: Not Connected, 1: RGMII, 2: SGMII, 3:SGMII+
+**/
+ UINT8 PseTsnGbePhyInterfaceType[2];
+
+/** Offset 0x038D
+**/
+ UINT8 UnusedUpdSpace15[3];
+
+/** Offset 0x0390 - Tsn Mac Address Sub Region Base
+ Base address of TSN MAC Address Sub Region
+**/
+ UINT32 TsnMacAddrBase;
+
+/** Offset 0x0394 - Tsn Mac Address Sub Region Size
+ Size of TSN MAC Address Sub Region
+**/
+ UINT32 TsnMacAddrSize;
+
+/** Offset 0x0398 - PSE Tsn Ip Config Sub Region Base
+ Base address of PSE TSN IP Config Sub Region
+**/
+ UINT32 PseTsnIpConfigBase;
+
+/** Offset 0x039C - PSE Tsn Ip Config Sub Region Size
+ Size of PSE TSN IP Config Sub Region
+**/
+ UINT32 PseTsnIpConfigSize;
+
+/** Offset 0x03A0 - Tsn Config Sub Region Base
+ Base address of TSN Config Sub Region
+**/
+ UINT32 TsnConfigBase;
+
+/** Offset 0x03A4 - Tsn Config Sub Region Size
+ Size of TSN Config Sub Region
+**/
+ UINT32 TsnConfigSize;
+
+/** Offset 0x03A8 - PSE GBE0 DLL OVERRIDE
+ Enable/Disable PSE GBE DLL OVERRIDE
+ $EN_DIS
+**/
+ UINT8 PseGbeDllOverride[2];
+
+/** Offset 0x03AA - PSE GBE TX_Delay
+ PSE GBE TX_Delay configuration.
+**/
+ UINT8 PseGbeTxDelay[2];
+
+/** Offset 0x03AC - PCIe PTM enable/disable
+ Enable/disable Precision Time Measurement for PCIE Root Ports.
+**/
+ UINT8 PciePtm[24];
+
+/** Offset 0x03C4 - PCIe DPC enable/disable
+ Enable/disable Downstream Port Containment for PCIE Root Ports.
+**/
+ UINT8 PcieDpc[24];
+
+/** Offset 0x03DC - PCIe DPC extensions enable/disable
+ Enable/disable Downstream Port Containment Extensions for PCIE Root Ports.
+**/
+ UINT8 PcieEdpc[24];
+
+/** Offset 0x03F4 - USB PDO Programming
+ Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
+ during later phase. 1: enable, 0: disable
+ $EN_DIS
+**/
+ UINT8 UsbPdoProgramming;
+
+/** Offset 0x03F5
+**/
+ UINT8 UnusedUpdSpace16[3];
+
+/** Offset 0x03F8 - Power button debounce configuration
+ Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
+ be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
+**/
+ UINT32 PmcPowerButtonDebounce;
+
+/** Offset 0x03FC - PCH eSPI Master and Slave BME enabled
+ PCH eSPI Master and Slave BME enabled
+ $EN_DIS
+**/
+ UINT8 PchEspiBmeMasterSlaveEnabled;
+
+/** Offset 0x03FD - PCH SATA use RST Legacy OROM
+ Use PCH SATA RST Legacy OROM when CSM is Enabled
+ $EN_DIS
+**/
+ UINT8 SataRstLegacyOrom;
+
+/** Offset 0x03FE - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states
+ Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
+**/
+ UINT8 PchFivrExtV1p05RailEnabledStates;
+
+/** Offset 0x03FF - Mask to enable the platform configuration of external V1p05 VR rail
+ External V1P05 Rail Supported Configuration
+**/
+ UINT8 PchFivrExtV1p05RailSupportedVoltageStates;
+
+/** Offset 0x0400 - External V1P05 Voltage Value that will be used in S0i2/S0i3 states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtV1p05RailVoltage;
+
+/** Offset 0x0402 - External V1P05 Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtV1p05RailIccMax;
+
+/** Offset 0x0403 - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states
+ Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
+**/
+ UINT8 PchFivrExtVnnRailEnabledStates;
+
+/** Offset 0x0404 - Mask to enable the platform configuration of external Vnn VR rail
+ External Vnn Rail Supported Configuration
+**/
+ UINT8 PchFivrExtVnnRailSupportedVoltageStates;
+
+/** Offset 0x0405
+**/
+ UINT8 UnusedUpdSpace17;
+
+/** Offset 0x0406 - External Vnn Voltage Value that will be used in S0ix/Sx states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420
+**/
+ UINT16 PchFivrExtVnnRailVoltage;
+
+/** Offset 0x0408 - External Vnn Icc Max Value that will be used in S0ix/Sx states
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailIccMax;
+
+/** Offset 0x0409 - Mask to enable the usage of external Vnn VR rail in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in
+ Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5
+**/
+ UINT8 PchFivrExtVnnRailSxEnabledStates;
+
+/** Offset 0x040A - External Vnn Voltage Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments
+ (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtVnnRailSxVoltage;
+
+/** Offset 0x040C - External Vnn Icc Max Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
+ is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailSxIccMax;
+
+/** Offset 0x040D - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to low current mode voltage.
+**/
+ UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime;
+
+/** Offset 0x040E - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to retention mode voltage.
+**/
+ UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime;
+
+/** Offset 0x040F - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to retention mode voltage.
+**/
+ UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime;
+
+/** Offset 0x0410 - Transition time in microseconds from Off (0V) to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 Transition to 0V is disabled.
+**/
+ UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime;
+
+/** Offset 0x0412
+**/
+ UINT8 UnusedUpdSpace18[2];
+
+/** Offset 0x0414 - Trace Hub Memory Base
+ If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
+ trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub
+ memory is configured properly.
+**/
+ UINT32 TraceHubMemBase;
+
+/** Offset 0x0418 - PMC Debug Message Enable
+ When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
+ will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
+ $EN_DIS
+**/
+ UINT8 PmcDbgMsgEn;
+
+/** Offset 0x0419
+**/
+ UINT8 UnusedUpdSpace19[3];
+
+/** Offset 0x041C - Pointer of ChipsetInit Binary
+ ChipsetInit Binary Pointer.
+**/
+ UINT32 ChipsetInitBinPtr;
+
+/** Offset 0x0420 - Length of ChipsetInit Binary
+ ChipsetInit Binary Length.
+**/
+ UINT32 ChipsetInitBinLen;
+
+/** Offset 0x0424 - ChipsetInit Sync Enable
+ Enable/Disable. 0: Disable, 1: Enable
+**/
+ UINT8 ChipsetInitSyncEnable;
+
+/** Offset 0x0425 - FIVR Dynamic Power Management
+ Enable/Disable FIVR Dynamic Power Management.
+ $EN_DIS
+**/
+ UINT8 PchFivrDynPm;
+
+/** Offset 0x0426 - External V1P05 Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+**/
+ UINT16 PchFivrExtV1p05RailIccMaximum;
+
+/** Offset 0x0428 - External Vnn Icc Max Value that will be used in S0ix/Sx states
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+**/
+ UINT16 PchFivrExtVnnRailIccMaximum;
+
+/** Offset 0x042A - External Vnn Icc Max Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
+ is 1mA and maximal possible value is 500mA
+**/
+ UINT16 PchFivrExtVnnRailSxIccMaximum;
+
+/** Offset 0x042C - PCH eSPI Link Configuration Lock (SBLCL)
+ Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI slaves
+ addresseses from range 0x0 - 0x7FF
+ $EN_DIS
+**/
+ UINT8 PchEspiLockLinkConfiguration;
+
+/** Offset 0x042D - Extented BIOS Direct Read Decode enable
+ Enable/Disable access to bigger than 16MB BIOS Region through Direct Memory Reads.
+ 0: disabled (default), 1: enabled
+ $EN_DIS
+**/
+ UINT8 PchSpiExtendedBiosDecodeRangeEnable;
+
+/** Offset 0x042E - PchPostMemRsvd
+ Reserved for PCH Post-Mem
+ $EN_DIS
+**/
+ UINT8 PchPostMemRsvd[11];
+
+/** Offset 0x0439
+**/
+ UINT8 UnusedUpdSpace20[3];
+
+/** Offset 0x043C - Extended BIOS Direct Read Decode Range base
+ Bits of 31:16 of a memory address that'll be a base for Extended BIOS Direct Read Decode.
+**/
+ UINT32 PchSpiExtendedBiosDecodeRangeBase;
+
+/** Offset 0x0440 - Extended BIOS Direct Read Decode Range limit
+ Bits of 31:16 of a memory address that'll be a limit for Extended BIOS Direct Read Decode.
+**/
+ UINT32 PchSpiExtendedBiosDecodeRangeLimit;
+
+/** Offset 0x0444 - CNVi Configuration
+ This option allows for automatic detection of Connectivity Solution. [Auto Detection]
+ assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi.
+ 0:Disable, 1:Auto
+**/
+ UINT8 CnviMode;
+
+/** Offset 0x0445 - CNVi BT Core
+ Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE
+ $EN_DIS
+**/
+ UINT8 CnviBtCore;
+
+/** Offset 0x0446 - CNVi BT Audio Offload
+ Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE
+ $EN_DIS
+**/
+ UINT8 CnviBtAudioOffload;
+
+/** Offset 0x0447
+**/
+ UINT8 UnusedUpdSpace21;
+
+/** Offset 0x0448 - CNVi RF_RESET pin muxing
+ Select CNVi RF_RESET# pin depending on board routing. TGP-LP: GPP_A8 = 0x2942E408(default)
+ or GPP_F4 = 0x194BE404. TGP-H: 0. TGP-K: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_*
+ in GpioPins*.h.
+**/
+ UINT32 CnviRfResetPinMux;
+
+/** Offset 0x044C - CNVi CLKREQ pin muxing
+ Select CNVi CLKREQ pin depending on board routing. TGP-LP: GPP_A9 = 0x3942E609(default)
+ or GPP_F5 = 0x394BE605. TGP-H: 0. TGP-K: 0. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_*
+ in GpioPins*.h.
+**/
+ UINT32 CnviClkreqPinMux;
+
+/** Offset 0x0450 - Enable Host C10 reporting through eSPI
+ Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire.
+ $EN_DIS
+**/
+ UINT8 PchEspiHostC10ReportEnable;
+
+/** Offset 0x0451 - PCH USB2 PHY Power Gating enable
+ 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
+ Sus Well PG
+ $EN_DIS
+**/
+ UINT8 PmcUsb2PhySusPgEnable;
+
+/** Offset 0x0452 - PCH USB OverCurrent mapping enable
+ 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
+ mapping allow for NOA usage of OC pins
+ $EN_DIS
+**/
+ UINT8 PchUsbOverCurrentEnable;
+
+/** Offset 0x0453 - Espi Lgmr Memory Range decode
+ This option enables or disables espi lgmr
+ $EN_DIS
+**/
+ UINT8 PchEspiLgmrEnable;
+
+/** Offset 0x0454 - External V1P05 Control Ramp Timer value
+ Hold off time to be used when changing the v1p05_ctrl for external bypass value in us
+**/
+ UINT8 PchFivrExtV1p05RailCtrlRampTmr;
+
+/** Offset 0x0455 - External VNN Control Ramp Timer value
+ Hold off time to be used when changing the vnn_ctrl for external bypass value in us
+**/
+ UINT8 PchFivrExtVnnRailCtrlRampTmr;
+
+/** Offset 0x0456 - HECI3 state
+ The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
+ 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 Heci3Enabled;
+
+/** Offset 0x0457 - PCHHOT# pin
+ Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchHotEnable;
+
+/** Offset 0x0458 - SATA LED
+ SATA LED indicating SATA controller activity. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SataLedEnable;
+
+/** Offset 0x0459 - VRAlert# Pin
+ When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
+ to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmVrAlert;
+
+/** Offset 0x045A - AMT Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
+ $EN_DIS
+**/
+ UINT8 AmtEnabled;
+
+/** Offset 0x045B - WatchDog Timer Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting
+ is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 WatchDogEnabled;
+
+/** Offset 0x045C - Manageability Mode set by Mebx
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode.
+ $EN_DIS
+**/
+ UINT8 ManageabilityMode;
+
+/** Offset 0x045D - PET Progress
+ Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
+ PET Events. Setting is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 FwProgress;
+
+/** Offset 0x045E - SOL Switch
+ Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx.
+ Setting is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 AmtSolEnabled;
+
+/** Offset 0x045F
+**/
+ UINT8 UnusedUpdSpace22;
+
+/** Offset 0x0460 - OS Timer
+ 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0.
+**/
+ UINT16 WatchDogTimerOs;
+
+/** Offset 0x0462 - BIOS Timer
+ 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0.
+**/
+ UINT16 WatchDogTimerBios;
+
+/** Offset 0x0464 - Remote Assistance Trigger Availablilty
+ Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx.
+ $EN_DIS
+**/
+ UINT8 RemoteAssistance;
+
+/** Offset 0x0465 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting
+ is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 AmtKvmEnabled;
+
+/** Offset 0x0466 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx.
+ $EN_DIS
+**/
+ UINT8 ForcMebxSyncUp;
+
+/** Offset 0x0467 - PCH PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 PcieRpSlotImplemented[24];
+
+/** Offset 0x047F - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 PcieRpAcsEnabled[24];
+
+/** Offset 0x0497 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 PcieRpEnableCpm[24];
+
+/** Offset 0x04AF - PCIE RP Multi VC Enabled
+ Enable/Disable PCIE RP Multiple Virtual Channels
+**/
+ UINT8 PcieRpMultiVcEnabled[24];
+
+/** Offset 0x04C7 - PCIE RP VC1 to TC Mapping
+ PCIE RP Virtual Channel 1 to Traffic Class mapping
+**/
+ UINT8 PcieRpVc1TcMap[24];
+
+/** Offset 0x04DF
+**/
+ UINT8 UnusedUpdSpace23[1];
+
+/** Offset 0x04E0 - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 PcieRpDetectTimeoutMs[24];
+
+/** Offset 0x0510 - ModPHY SUS Power Domain Dynamic Gating
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
+ PCH-H. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcModPhySusPgEnable;
+
+/** Offset 0x0511 - V1p05-PHY supply external FET control
+ Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY
+ supply. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcV1p05PhyExtFetControlEn;
+
+/** Offset 0x0512 - V1p05-IS supply external FET control
+ Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS
+ supply. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcV1p05IsExtFetControlEn;
+
+/** Offset 0x0513 - Enable/Disable PavpEnable
+ Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
+ $EN_DIS
+**/
+ UINT8 PavpEnable;
+
+/** Offset 0x0514 - CdClock Frequency selection
+ 0 (Default) Auto (Max based on reference clock frequency), 0: 307.2, 1: 312 Mhz,
+ 2: 552 Mhz, 3: 556.8 Mhz, 4: 648 Mhz, 5: 652.8 Mhz
+ 0xFF: Auto (Max based on reference clock frequency), 0: 307.2, 1: 312 Mhz, 2: 552
+ Mhz, 3: 556.8 Mhz, 4: 648 Mhz, 5: 652.8 Mhz
+**/
+ UINT8 CdClock;
+
+/** Offset 0x0515 - Enable/Disable PeiGraphicsPeimInit
+ Enable(Default): Enable PeiGraphicsPeimInit, Disable: Disable PeiGraphicsPeimInit
+ $EN_DIS
+**/
+ UINT8 PeiGraphicsPeimInit;
+
+/** Offset 0x0516 - Enable D3 Hot in TCSS
+ This policy will enable/disable D3 hot support in IOM
+ $EN_DIS
+**/
+ UINT8 D3HotEnable;
+
+/** Offset 0x0517 - Enable or disable GNA device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 GnaEnable;
+
+/** Offset 0x0518 - Enable or disable HPD of DDI port-A device
+ 0=Disabled,1(Default)=eDP, 2=MIPI DSI,
+ 0:Disabled, 1:eDP, 2:MIPI DSI
+**/
+ UINT8 DdiPortAConfig;
+
+/** Offset 0x0519 - Enable or disable HPD of DDI port-B device
+ 1(Default)=DP, 2=MIPI DSI, 3=HDMI
+ 1:DP, 2:MIPI DSI, 3:HDMI
+**/
+ UINT8 DdiPortBConfig;
+
+/** Offset 0x051A - Enable or disable HPD of DDI port-C device
+ 1(Default)= HDMI, 2=DP
+ 1:HDMI, 2:DP
+**/
+ UINT8 DdiPortCConfig;
+
+/** Offset 0x051B - Enable or disable HPD of DDI port A
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortAHpd;
+
+/** Offset 0x051C - Enable or disable HPD of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBHpd;
+
+/** Offset 0x051D - Enable or disable HPD of DDI port C
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCHpd;
+
+/** Offset 0x051E - Enable or disable HPD of DDI port 1
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort1Hpd;
+
+/** Offset 0x051F - Enable or disable HPD of DDI port 2
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort2Hpd;
+
+/** Offset 0x0520 - Enable or disable HPD of DDI port 3
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort3Hpd;
+
+/** Offset 0x0521 - Enable or disable HPD of DDI port 4
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort4Hpd;
+
+/** Offset 0x0522 - Enable or disable DDC of DDI port A
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortADdc;
+
+/** Offset 0x0523 - Enable or disable DDC of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBDdc;
+
+/** Offset 0x0524 - Enable or disable DDC of DDI port C
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCDdc;
+
+/** Offset 0x0525 - Enable DDC setting of DDI Port 1
+ 0=Disable, 1=DDC(Default)
+ 0: Disable, 1: DDC
+**/
+ UINT8 DdiPort1Ddc;
+
+/** Offset 0x0526 - Enable DDC setting of DDI Port 2
+ 0=Disable, 1=DDC(Default)
+ 0: Disable, 1: DDC
+**/
+ UINT8 DdiPort2Ddc;
+
+/** Offset 0x0527 - Enable DDC setting of DDI Port 3
+ 0=Disable, 1=DDC(Default)
+ 0: Disable, 1: DDC
+**/
+ UINT8 DdiPort3Ddc;
+
+/** Offset 0x0528 - Enable DDC setting of DDI Port 4
+ 0=Disable, 1=DDC(Default)
+ 0: Disable, 1: DDC
+**/
+ UINT8 DdiPort4Ddc;
+
+/** Offset 0x0529
+**/
+ UINT8 UnusedUpdSpace24[3];
+
+/** Offset 0x052C - TypeC port GPIO setting
+ GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined
+ in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Ehl
+ = ElkhartLake)
+**/
+ UINT32 IomTypeCPortPadCfg[8];
+
+/** Offset 0x054C - CPU USB3 Port Over Current Pin
+ Describe the specific over current pin number of USBC Port N.
+**/
+ UINT8 CpuUsb3OverCurrentPin[8];
+
+/** Offset 0x0554 - Enable D3 Cold in TCSS
+ This policy will enable/disable D3 cold support in IOM
+ $EN_DIS
+**/
+ UINT8 D3ColdEnable;
+
+/** Offset 0x0555 - PchPostMemRsvd
+ Reserved for PCH Post-Mem
+ $EN_DIS
+**/
+ UINT8 SaPostMemRsvd[8];
+
+/** Offset 0x055D - Enable VMD controller
+ Enable/disable to VMD controller.0: Disable(Default); 1: Enable
+ $EN_DIS
+**/
+ UINT8 VmdEnable;
+
+/** Offset 0x055E - Enable VMD portA Support
+ Enable/disable to VMD portA Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortA;
+
+/** Offset 0x055F - Enable VMD portB Support
+ Enable/disable to VMD portB Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortB;
+
+/** Offset 0x0560 - Enable VMD portC Support
+ Enable/disable to VMD portC Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortC;
+
+/** Offset 0x0561 - Enable VMD portD Support
+ Enable/disable to VMD portD Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortD;
+
+/** Offset 0x0562 - VMD Config Bar size
+ Set The VMD Config Bar Size.
+**/
+ UINT8 VmdCfgBarSz;
+
+/** Offset 0x0563 - VMD Config Bar Attributes
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default)
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdCfgBarAttr;
+
+/** Offset 0x0564 - VMD Mem Bar1 size
+ Set The VMD Mem Bar1 Size.
+**/
+ UINT8 VmdMemBarSz1;
+
+/** Offset 0x0565 - VMD Mem Bar1 Attributes
+ 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdMemBar1Attr;
+
+/** Offset 0x0566 - VMD Mem Bar2 size
+ Set The VMD Mem Bar2 Size.
+**/
+ UINT8 VmdMemBarSz2;
+
+/** Offset 0x0567 - VMD Mem Bar2 Attributes
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdMemBar2Attr;
+
+/** Offset 0x0568 - Enable/Disable PMC-PD Solution
+ This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution
+ $EN_DIS
+**/
+ UINT8 PmcPdEnable;
+
+/** Offset 0x0569
+**/
+ UINT8 UnusedUpdSpace25;
+
+/** Offset 0x056A - TCSS Aux Orientation Override Enable
+ Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
+**/
+ UINT16 TcssAuxOri;
+
+/** Offset 0x056C - TCSS HSL Orientation Override Enable
+ Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
+**/
+ UINT16 TcssHslOri;
+
+/** Offset 0x056E - USB override in IOM
+ This policy will enable/disable USB Connect override in IOM
+ $EN_DIS
+**/
+ UINT8 UsbOverride;
+
+/** Offset 0x056F - TCSS USB Port Enable
+ Bits 0, 1, ... max Type C port control enables
+**/
+ UINT8 UsbTcPortEn;
+
+/** Offset 0x0570 - ITBT Root Port Enable
+ ITBT Root Port Enable, 0:Disable, 1:Enable
+ 0:Disable, 1:Enable
+**/
+ UINT8 ITbtPcieRootPortEn[4];
+
+/** Offset 0x0574 - ITBTForcePowerOn Timeout value
+ ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000.
+ 100 = 100 ms.
+**/
+ UINT16 ITbtForcePowerOnTimeoutInMs;
+
+/** Offset 0x0576 - ITbtConnectTopology Timeout value
+ ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range
+ is 0-10000. 100 = 100 ms.
+**/
+ UINT16 ITbtConnectTopologyTimeoutInMs;
+
+/** Offset 0x0578 - VCCST request for IOM
+ This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5
+ $EN_DIS
+**/
+ UINT8 VccSt;
+
+/** Offset 0x0579
+**/
+ UINT8 UnusedUpdSpace26[1];
+
+/** Offset 0x057A - ITBT DMA LTR
+ TCSS DMA1, DMA2 LTR value
+**/
+ UINT16 ITbtDmaLtr[2];
+
+/** Offset 0x057E - Enable/Disable CrashLog
+ Enable(Default): Enable CPU CrashLog, Disable: Disable CPU CrashLog
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogEnable;
+
+/** Offset 0x057F - Enable/Disable PTM
+ This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports
+ $EN_DIS
+**/
+ UINT8 PtmEnabled[4];
+
+/** Offset 0x0583 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 SaPcieItbtRpLtrEnable[4];
+
+/** Offset 0x0587 - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4];
+
+/** Offset 0x058B - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x058F
+**/
+ UINT8 UnusedUpdSpace27[1];
+
+/** Offset 0x0590 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4];
+
+/** Offset 0x0598 - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4];
+
+/** Offset 0x059C - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x05A0 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4];
+
+/** Offset 0x05A8 - Force LTR Override
+ Force LTR Override.
+**/
+ UINT8 SaPcieItbtRpForceLtrOverride[4];
+
+/** Offset 0x05AC - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 SaPcieItbtRpLtrConfigLock[4];
+
+/** Offset 0x05B0 - Advanced Encryption Standard (AES) feature
+ Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 AesEnable;
+
+/** Offset 0x05B1 - Power State 3 enable/disable
+ PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
+ For all VR Indexes
+**/
+ UINT8 Psi3Enable[5];
+
+/** Offset 0x05B6 - Power State 4 enable/disable
+ PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
+ all VR Indexes
+**/
+ UINT8 Psi4Enable[5];
+
+/** Offset 0x05BB
+**/
+ UINT8 UnusedUpdSpace28[1];
+
+/** Offset 0x05BC - Imon slope correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT16 ImonSlope[5];
+
+/** Offset 0x05C6 - Imon offset correction
+ PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
+ Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
+**/
+ UINT16 ImonOffset[5];
+
+/** Offset 0x05D0 - Enable/Disable BIOS configuration of VR
+ Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
+**/
+ UINT8 VrConfigEnable[5];
+
+/** Offset 0x05D5 - Thermal Design Current enable/disable
+ PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
+ Enable.For all VR Indexes
+**/
+ UINT8 TdcEnable[5];
+
+/** Offset 0x05DA
+**/
+ UINT8 UnusedUpdSpace29[2];
+
+/** Offset 0x05DC - Thermal Design Current time window
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Range 1ms to 448s
+**/
+ UINT32 TdcTimeWindow[5];
+
+/** Offset 0x05F0 - Thermal Design Current Lock
+ PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
+ all VR Indexes
+**/
+ UINT8 TdcLock[5];
+
+/** Offset 0x05F5 - Platform Psys slope correction
+ PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
+ 1/100 increment values. Range is 0-200. 125 = 1.25
+**/
+ UINT8 PsysSlope;
+
+/** Offset 0x05F6 - Platform Psys offset correction
+ PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/1000,
+ Range 0-63999. For an offset of 25.348, enter 25348.
+**/
+ UINT16 PsysOffset;
+
+/** Offset 0x05F8 - Acoustic Noise Mitigation feature
+ Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 AcousticNoiseMitigation;
+
+/** Offset 0x05F9 - Disable Fast Slew Rate for Deep Package C States for VR domains
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisable[5];
+
+/** Offset 0x05FE - Slew Rate configuration for Deep Package C States for VR domains
+ Slew Rate configuration for Deep Package C States for VR domains based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRate[5];
+
+/** Offset 0x0603
+**/
+ UINT8 UnusedUpdSpace30[1];
+
+/** Offset 0x0604 - Thermal Design Current current limit
+ PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units.
+ Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes
+**/
+ UINT16 TdcCurrentLimit[5];
+
+/** Offset 0x060E - AcLoadline
+ PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
+**/
+ UINT16 AcLoadline[5];
+
+/** Offset 0x0618 - DcLoadline
+ PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
+**/
+ UINT16 DcLoadline[5];
+
+/** Offset 0x0622 - Power State 1 Threshold current
+ PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi1Threshold[5];
+
+/** Offset 0x062C - Power State 2 Threshold current
+ PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi2Threshold[5];
+
+/** Offset 0x0636 - Power State 3 Threshold current
+ PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi3Threshold[5];
+
+/** Offset 0x0640 - Icc Max limit
+ PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A
+**/
+ UINT16 IccMax[5];
+
+/** Offset 0x064A - Enable VR specific mailbox command
+ VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A
+ VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific
+ command sent for PS4 exit issue. 11b - Reserved.
+ $EN_DIS
+**/
+ UINT8 SendVrMbxCmd;
+
+/** Offset 0x064B - Enable or Disable TXT
+ Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 TxtEnable;
+
+/** Offset 0x064C - Skip Multi-Processor Initialization
+ When this is skipped, boot loader must initialize processors before SilicionInit
+ API. </b>0: Initialize; <b>1: Skip
+ $EN_DIS
+**/
+ UINT8 SkipMpInit;
+
+/** Offset 0x064D
+**/
+ UINT8 UnusedUpdSpace31;
+
+/** Offset 0x064E - FIVR RFI Frequency
+ PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
+ Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
+ 0-1535 (Up to 153.5MHz) for 19MHz clock.
+**/
+ UINT16 FivrRfiFrequency;
+
+/** Offset 0x0650 - FIVR RFI Spread Spectrum
+ PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>;
+ Range: 0.0% to 10.0% (0-100).
+**/
+ UINT8 FivrSpreadSpectrum;
+
+/** Offset 0x0651
+**/
+ UINT8 UnusedUpdSpace32[3];
+
+/** Offset 0x0654 - UFS Soft Strap Start Address
+ UFS Soft Strap Start Address, Value will be based on the CSE IFWI Layout
+**/
+ UINT32 UfsStrapAddress;
+
+/** Offset 0x0658 - CpuBistData
+ Pointer CPU BIST Data
+**/
+ UINT32 CpuBistData;
+
+/** Offset 0x065C - CpuMpPpi
+ <b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI.
+ If not NULL, FSP will use the boot loader's implementation of multiprocessing.
+ See section 5.1.4 of the FSP Integration Guide for more details.
+**/
+ UINT32 CpuMpPpi;
+
+/** Offset 0x0660 - CpuMpHob
+ <b>Optional</b> pointer for CpuMpHob. If the boot loader is a UEFI boot loader using
+ API mode instead of dispatch mode, and FspsUpd->FspsConfig.CpuMpPpi != NULL, then
+ FspsUpd->FspsConfig.CpuMpHob must be != NULL. See section 5.1.4 of the FSP Integration
+ Guide for more details.
+**/
+ UINT32 CpuMpHob;
+
+/** Offset 0x0664
+**/
+ UINT8 CpuPostMemRsvd[16];
+
+/** Offset 0x0674 - PpinSupport to view Protected Processor Inventory Number
+ Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this
+ flag is set) for PPIN Support
+ 0: Disable, 1: Enable, 2: Auto
+**/
+ UINT8 PpinSupport;
+
+/** Offset 0x0675 - Enable or Disable Minimum Voltage Override
+ Enable or disable Minimum Voltage overrides ; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 EnableMinVoltageOverride;
+
+/** Offset 0x0676 - Min Voltage for Runtime
+ PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride
+ = 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageRuntime;
+
+/** Offset 0x0678 - Base of memory region allocated for Processor Trace
+ Base address of memory region allocated for Processor Trace. Processor Trace requires
+ 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT64 ProcessorTraceMemBase;
+
+/** Offset 0x0680 - Memory region allocation for Processor Trace
+ Length in bytes of memory region allocated for Processor Trace. Processor Trace
+ requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT32 ProcessorTraceMemLength;
+
+/** Offset 0x0684 - Min Voltage for C8
+ PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride =
+ 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageC8;
+
+/** Offset 0x0686 - Smbios Type4 Max Speed Override
+ Provide the option for platform to override the MaxSpeed field of Smbios Type 4.
+ If this value is not zero, it dominates the field.
+**/
+ UINT16 SmbiosType4MaxSpeedOverride;
+
+/** Offset 0x0688 - ReservedCpuPostMemProduction
+ Reserved for CPU Post-Mem Production
+ $EN_DIS
+**/
+ UINT8 ReservedCpuPostMemProduction[6];
+
+/** Offset 0x068E - AC Split Lock
+ Enable/Disable #AC check on split lock. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 AcSplitLock;
+
+/** Offset 0x068F - PCH Master Clock Gating Control
+ Provide a master control for clock gating for all PCH devices, 0: Disabled; 1: Default
+ $EN_DIS
+**/
+ UINT8 PchMasterClockGating;
+
+/** Offset 0x0690 - PCH Master Power Gating Control
+ Provide a master control for pwoer gating for all PCH devices, 0: Disabled; 1: Default
+ $EN_DIS
+**/
+ UINT8 PchMasterPowerGating;
+
+/** Offset 0x0691 - Sci Pin Mux Enable
+ Enable/Disable Sci Gpio Pin Mux. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 SciPinMuxEnable;
+
+/** Offset 0x0692 - Enable Power Optimizer
+ Enable DMI Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 PchPwrOptEnable;
+
+/** Offset 0x0693 - PCH Flash Protection Ranges Write Enble
+ Write or erase is blocked by hardware.
+**/
+ UINT8 PchWriteProtectionEnable[5];
+
+/** Offset 0x0698 - PCH Flash Protection Ranges Read Enble
+ Read is blocked by hardware.
+**/
+ UINT8 PchReadProtectionEnable[5];
+
+/** Offset 0x069D
+**/
+ UINT8 UnusedUpdSpace33[1];
+
+/** Offset 0x069E - PCH Protect Range Limit
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
+ limit comparison.
+**/
+ UINT16 PchProtectedRangeLimit[5];
+
+/** Offset 0x06A8 - PCH Protect Range Base
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
+**/
+ UINT16 PchProtectedRangeBase[5];
+
+/** Offset 0x06B2 - Enable Pme
+ Enable Azalia wake-on-ring.
+ $EN_DIS
+**/
+ UINT8 PchHdaPme;
+
+/** Offset 0x06B3 - HD Audio Link Frequency
+ HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
+ 0: 6MHz, 1: 12MHz, 2: 24MHz
+**/
+ UINT8 PchHdaLinkFrequency;
+
+/** Offset 0x06B4 - PchPostMemRsvd
+ Reserved for PCH Post-Mem
+ $EN_DIS
+**/
+ UINT8 PchPostMemRsvd4[3];
+
+/** Offset 0x06B7 - Enable PCH Io Apic Entry 24-119
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIoApicEntry24_119;
+
+/** Offset 0x06B8 - PCH Io Apic ID
+ This member determines IOAPIC ID. Default is 0x02.
+**/
+ UINT8 PchIoApicId;
+
+/** Offset 0x06B9
+**/
+ UINT8 UnusedUpdSpace34[3];
+
+/** Offset 0x06BC - PCH PSE Log Output Channel
+ Set PSE Log Output Channel. 0: internal memory; 1-6: UART channels; Other: shut down
+**/
+ UINT32 PchPseLogOutputChannel;
+
+/** Offset 0x06C0 - PCH PSE Log Output Size
+ Set PSE Log Output Size
+**/
+ UINT16 PchPseLogOutputSize;
+
+/** Offset 0x06C2 - PCH PSE Log Output Offset
+ Set PSE Log Output Offset
+**/
+ UINT16 PchPseLogOutputOffset;
+
+/** Offset 0x06C4 - PCH PSE OOB Prov State Offset
+ Set PSE OOB Prov State Offset
+**/
+ UINT16 PchPseOobProvDone;
+
+/** Offset 0x06C6 - Enable PCH PSE I2S pins assigned
+ Set if PSE I2S native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseI2sEnable[2];
+
+/** Offset 0x06C8 - PchPseI2sTxPinMux
+ Select PSE I2S Tx pin muxing. Refer to GPIO_*_MUXING_PSE_I2Sx_TXD* for possible values.
+**/
+ UINT32 PchPseI2sTxPinMux[2];
+
+/** Offset 0x06D0 - PchPseI2sRxPinMux
+ Select PSE I2S Rx pin muxing. Refer to GPIO_*_MUXING_PSE_I2Sx_RXD* for possible values.
+**/
+ UINT32 PchPseI2sRxPinMux[2];
+
+/** Offset 0x06D8 - PchPseI2sSfrmPinMux
+ Select PSE I2S Sfrm pin muxing. Refer to GPIO_*_MUXING_PSE_I2Sx_SFRM* for possible values.
+**/
+ UINT32 PchPseI2sSfrmPinMux[2];
+
+/** Offset 0x06E0 - PchPseI2sSclkPinMux
+ Select PSE I2S Sclk pin muxing. Refer to GPIO_*_MUXING_PSE_I2Sx_SCLK* for possible values.
+**/
+ UINT32 PchPseI2sSclkPinMux[2];
+
+/** Offset 0x06E8 - Enable PCH PSE PWM pins assigned
+ Set if PSE PWM native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPsePwmEnable;
+
+/** Offset 0x06E9 - PchPsePwmPinEnable
+ Set PWM pin to PSE PWM native function. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPsePwmPinEnable[16];
+
+/** Offset 0x06F9
+**/
+ UINT8 UnusedUpdSpace35[3];
+
+/** Offset 0x06FC - PchPsePwmPinMux
+ Select PSE Pwm pin muxing start from PWM0 to PWM15. Refer to GPIO_*_MUXING_PSE_PWM*
+ for possible values.
+**/
+ UINT32 PchPsePwmPinMux[16];
+
+/** Offset 0x073C - Enable PCH PSE UART pins assigned
+ Set if PSE UART native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseUartEnable[6];
+
+/** Offset 0x0742 - Enable PCH PSE HSUART pins assigned
+ Set if PSE HSUART native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseHsuartEnable[4];
+
+/** Offset 0x0746 - Enable PCH PSE QEP pins assigned
+ Set if PSE QEP native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseQepEnable[4];
+
+/** Offset 0x074A - Enable PCH PSE DMA pins assigned
+ Set if PSE DMA native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseDmaEnable[3];
+
+/** Offset 0x074D - Enable PCH PSE GBE pins assigned
+ Set if PSE GBE native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseGbeEnable[2];
+
+/** Offset 0x074F - Enable PCH PSE I2C pins assigned
+ Set if PSE I2C native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseI2cEnable[8];
+
+/** Offset 0x0757 - Enable PCH PSE SPI pins assigned
+ Set if PSE SPI native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseSpiEnable[4];
+
+/** Offset 0x075B - Enable PCH PSE SPI CS0 pins assigned
+ Set if PSE SPI CS0 pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseSpiCs0Enable[4];
+
+/** Offset 0x075F - Enable PCH PSE SPI CS1 pins assigned
+ Set if PSE SPI CS1 pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseSpiCs1Enable[4];
+
+/** Offset 0x0763
+**/
+ UINT8 UnusedUpdSpace36[1];
+
+/** Offset 0x0764 - PchPseSpiMosiPinMux
+ Select PSE Spi Mosi pin muxing. Refer to GPIO_*_MUXING_PSE_SPIx_MOSI* for possible values.
+**/
+ UINT32 PchPseSpiMosiPinMux[4];
+
+/** Offset 0x0774 - PchPseSpiMisoPinMux
+ Select PSE Spi Miso pin muxing. Refer to GPIO_*_MUXING_PSE_SPIx_MISO* for possible values.
+**/
+ UINT32 PchPseSpiMisoPinMux[4];
+
+/** Offset 0x0784 - PchPseSpiClkPinMux
+ Select PSE Spi Clk pin muxing. Refer to GPIO_*_MUXING_PSE_SPIx_SCLK* for possible values.
+**/
+ UINT32 PchPseSpiClkPinMux[4];
+
+/** Offset 0x0794 - PchPseSpiCs0PinMux
+ Select PSE Spi Cs pin muxing. Refer to GPIO_*_MUXING_PSE_SPIx_Cs* for possible values.
+**/
+ UINT32 PchPseSpiCs0PinMux[4];
+
+/** Offset 0x07A4 - PchPseSpiCs1PinMux
+ Select PSE Spi Cs pin muxing. Refer to GPIO_*_MUXING_PSE_SPIx_Cs* for possible values.
+**/
+ UINT32 PchPseSpiCs1PinMux[4];
+
+/** Offset 0x07B4 - Enable PCH PSE ADC pins assigned
+ Set if PSE ADC native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseAdcEnable;
+
+/** Offset 0x07B5 - Enable PCH PSE CAN pins assigned
+ Set if PSE CAN native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseCanEnable[2];
+
+/** Offset 0x07B7 - Enable PCH PSE I2S sideband interrupt
+ Set if PSE I2S are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseI2sSbInterruptEnable[2];
+
+/** Offset 0x07B9 - Enable PCH PSE PWM sideband interrupt
+ Set if PSE PWM are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPsePwmSbInterruptEnable;
+
+/** Offset 0x07BA - Enable PCH PSE UART sideband interrupt
+ Set if PSE UART are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseUartSbInterruptEnable[6];
+
+/** Offset 0x07C0 - Enable PCH PSE QEP sideband interrupt
+ Set if PSE QEP are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseQepSbInterruptEnable[4];
+
+/** Offset 0x07C4 - Enable PCH PSE DMA sideband interrupt
+ Set if PSE DMA are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseDmaSbInterruptEnable[3];
+
+/** Offset 0x07C7 - Enable PCH PSE I2C sideband interrupt
+ Set if PSE I2C are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseI2cSbInterruptEnable[8];
+
+/** Offset 0x07CF - Enable PCH PSE SPI sideband interrupt
+ Set if PSE SPI are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseSpiSbInterruptEnable[4];
+
+/** Offset 0x07D3 - Enable PCH PSE ADC sideband interrupt
+ Set if PSE ADC are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseAdcSbInterruptEnable;
+
+/** Offset 0x07D4 - Enable PCH PSE LH2OSE sideband interrupt
+ Set if PSE LH2OSE are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseLh2PseSbInterruptEnable;
+
+/** Offset 0x07D5 - Enable PCH PSE CAN sideband interrupt
+ Set if PSE CAN are to be set to sideband interrupt. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseCanSbInterruptEnable[2];
+
+/** Offset 0x07D7 - Enable PCH PSE Timed GPIO pins assigned
+ Set if PSE Timed GPIO native pins and ownership are to be enabled by BIOS. 0: Disable/pins
+ are not owned by PSE/host; 1: Pins are muxed to PSE IP, the IO is owned by PSE;
+ 2: Pins are muxed to PSE IP, the IO is owned by host;
+**/
+ UINT8 PchPseTimedGpioEnable[2];
+
+/** Offset 0x07D9 - Enable PCH PSE Timed GPIO 20 pins allocation
+ Allocate 20 pins for PCH PSE Timed GPIO. 0: Top 20 pins; 1: Mid 20 pins; 2: Lower 20 pins.
+**/
+ UINT8 PchPseTimedGpioPinAllocation[2];
+
+/** Offset 0x07DB - Enable PCH PSE Timed GPIO Pin to PSE TGPIO native function
+ Set TGPIO pin to PSE TGPIO native function. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseTimedGpioPinEnable[60];
+
+/** Offset 0x0817
+**/
+ UINT8 UnusedUpdSpace37;
+
+/** Offset 0x0818 - Pch Pse Tgpio6 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio6PinMux;
+
+/** Offset 0x081C - Pch Pse Tgpio7 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio7PinMux;
+
+/** Offset 0x0820 - Pch Pse Tgpio8 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio8PinMux;
+
+/** Offset 0x0824 - Pch Pse Tgpio9 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio9PinMux;
+
+/** Offset 0x0828 - Pch Pse Tgpio10 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio10PinMux;
+
+/** Offset 0x082C - Pch Pse Tgpio11 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio11PinMux;
+
+/** Offset 0x0830 - Pch Pse Tgpio12 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio12PinMux;
+
+/** Offset 0x0834 - Pch Pse Tgpio13 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio13PinMux;
+
+/** Offset 0x0838 - Pch Pse Tgpio14 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio14PinMux;
+
+/** Offset 0x083C - Pch Pse Tgpio15 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio15PinMux;
+
+/** Offset 0x0840 - Pch Pse Tgpio16 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio16PinMux;
+
+/** Offset 0x0844 - Pch Pse Tgpio17 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio17PinMux;
+
+/** Offset 0x0848 - Pch Pse Tgpio18 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio18PinMux;
+
+/** Offset 0x084C - Pch Pse Tgpio19 Pin Mux
+ Select PSE Timed Gpio pin muxing. Refer to GPIO_*_MUXING_PSE_TGPIO* for possible values.
+**/
+ UINT32 PchPseTgpio19PinMux;
+
+/** Offset 0x0850 - Enable PCH Lan LTR capabilty of PCH internal LAN
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchLanLtrEnable;
+
+/** Offset 0x0851 - Enable LOCKDOWN BIOS LOCK
+ Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
+ protection.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosLock;
+
+/** Offset 0x0852 - PCH Compatibility Revision ID
+ This member describes whether or not the CRID feature of PCH should be enabled.
+ $EN_DIS
+**/
+ UINT8 PchCrid;
+
+/** Offset 0x0853 - RTC BIOS Interface Lock
+ Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed.
+ $EN_DIS
+**/
+ UINT8 RtcBiosInterfaceLock;
+
+/** Offset 0x0854 - RTC Cmos Memory Lock
+ Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
+ and and lower 128-byte bank of RTC RAM.
+ $EN_DIS
+**/
+ UINT8 RtcMemoryLock;
+
+/** Offset 0x0855 - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
+**/
+ UINT8 PcieRpHotPlug[24];
+
+/** Offset 0x086D - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 PcieRpPmSci[24];
+
+/** Offset 0x0885 - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
+**/
+ UINT8 PcieRpTransmitterHalfSwing[24];
+
+/** Offset 0x089D - Enable PCIE RP Clk Req Detect
+ Probe CLKREQ# signal before enabling CLKREQ# based power management.
+**/
+ UINT8 PcieRpClkReqDetect[24];
+
+/** Offset 0x08B5 - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 PcieRpAdvancedErrorReporting[24];
+
+/** Offset 0x08CD - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 PcieRpUnsupportedRequestReport[24];
+
+/** Offset 0x08E5 - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpFatalErrorReport[24];
+
+/** Offset 0x08FD - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpNoFatalErrorReport[24];
+
+/** Offset 0x0915 - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 PcieRpCorrectableErrorReport[24];
+
+/** Offset 0x092D - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnFatalError[24];
+
+/** Offset 0x0945 - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnNonFatalError[24];
+
+/** Offset 0x095D - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnCorrectableError[24];
+
+/** Offset 0x0975 - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 PcieRpMaxPayload[24];
+
+/** Offset 0x098D - Touch Host Controller Port 0 Assignment
+ Assign THC Port 0
+ 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0
+**/
+ UINT8 ThcPort0Assignment;
+
+/** Offset 0x098E
+**/
+ UINT8 UnusedUpdSpace38[2];
+
+/** Offset 0x0990 - THC Port 0 Interrupt Pin Mux
+ Set THC Port 0 Pin Muxing Value if signal can be enabled on multiple pads. Refer
+ to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values.
+**/
+ UINT32 ThcPort0InterruptPinMuxing;
+
+/** Offset 0x0994 - Touch Host Controller Port 1 Assignment
+ Assign THC Port 1
+ 0x0:ThcAssignmentNone, 0x1:ThcPort1AssignmentThc0, 0x2:ThcAssignmentThc1
+**/
+ UINT8 ThcPort1Assignment;
+
+/** Offset 0x0995 - Touch Host Controller Port 1 ReadFrequency
+ Set THC Port 1 Read Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
+ 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
+**/
+ UINT8 ThcPort1ReadFrequency;
+
+/** Offset 0x0996 - Touch Host Controller Port 1 WriteFrequency
+ Set THC Port 1 Write Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
+ 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
+**/
+ UINT8 ThcPort1WriteFrequency;
+
+/** Offset 0x0997
+**/
+ UINT8 UnusedUpdSpace39;
+
+/** Offset 0x0998 - THC Port 1 Interrupt Pin Mux
+ Set THC Port 1 Pin Muxing Value if signal can be enabled on multiple pads. Refer
+ to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values.
+**/
+ UINT32 ThcPort1InterruptPinMuxing;
+
+/** Offset 0x099C - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
+ PCH_PCIE_SPEED).
+**/
+ UINT8 PcieRpPcieSpeed[24];
+
+/** Offset 0x09B4 - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 PcieRpPhysicalSlotNumber[24];
+
+/** Offset 0x09CC - PCIE RP Completion Timeout
+ The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default.
+**/
+ UINT8 PcieRpCompletionTimeout[24];
+
+/** Offset 0x09E4 - PCIE RP Aspm
+ The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
+ PchPcieAspmAutoConfig.
+**/
+ UINT8 PcieRpAspm[24];
+
+/** Offset 0x09FC - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL).
+ Default is PchPcieL1SubstatesL1_1_2.
+**/
+ UINT8 PcieRpL1Substates[24];
+
+/** Offset 0x0A14 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 PcieRpLtrEnable[24];
+
+/** Offset 0x0A2C - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PcieRpLtrConfigLock[24];
+
+/** Offset 0x0A44 - PCIe override default settings for EQ
+ Choose PCIe EQ method
+ $EN_DIS
+**/
+ UINT8 PcieEqOverrideDefault;
+
+/** Offset 0x0A45 - PCIe choose EQ method
+ Choose PCIe EQ method
+ 0: HardwareEq, 1: FixedEq
+**/
+ UINT8 PcieEqMethod;
+
+/** Offset 0x0A46 - PCIe choose EQ mode
+ Choose PCIe EQ mode
+ 0: PresetEq, 1: CoefficientEq
+**/
+ UINT8 PcieEqMode;
+
+/** Offset 0x0A47 - PCIe EQ local transmitter override
+ Enable/Disable local transmitter override
+ $EN_DIS
+**/
+ UINT8 PcieEqLocalTransmitterOverrideEnable;
+
+/** Offset 0x0A48 - PCIe number of valid list entries
+ Select number of presets or coefficients depending on the mode
+**/
+ UINT8 PcieEqPh3NumberOfPresetsOrCoefficients;
+
+/** Offset 0x0A49 - PCIe pre-cursor coefficient list
+ Provide a list of pre-cursor coefficients to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PreCursorList[10];
+
+/** Offset 0x0A53 - PCIe post-cursor coefficient list
+ Provide a list of post-cursor coefficients to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PostCursorList[10];
+
+/** Offset 0x0A5D - PCIe preset list
+ Provide a list of presets to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PresetList[11];
+
+/** Offset 0x0A68 - PCIe EQ phase 1 downstream transmitter port preset
+ Allows to select the downstream port preset value that will be used during phase
+ 1 of equalization
+**/
+ UINT32 PcieEqPh1DownstreamPortTransmitterPreset;
+
+/** Offset 0x0A6C - PCIe EQ phase 1 upstream tranmitter port preset
+ Allows to select the upstream port preset value that will be used during phase 1
+ of equalization
+**/
+ UINT32 PcieEqPh1UpstreamPortTransmitterPreset;
+
+/** Offset 0x0A70 - PCIe EQ phase 2 local transmitter override preset
+ Allows to select the value of the preset used during phase 2 local transmitter override
+**/
+ UINT8 PcieEqPh2LocalTransmitterOverridePreset;
+
+/** Offset 0x0A71 - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePeerMemoryWrite;
+
+/** Offset 0x0A72 - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 PcieComplianceTestMode;
+
+/** Offset 0x0A73 - PCI Express Clock Gating
+ Enable/Disable Clock Gating, 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE.
+ 0: POR, 1: Force Enable, 2: Force Disable
+**/
+ UINT8 TestPcieClockGating;
+
+/** Offset 0x0A74 - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 PcieRpFunctionSwap;
+
+/** Offset 0x0A75 - Enable/Disable PEG GEN3 Static EQ Phase1 programming
+ Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
+ Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 CpuPcieGen3ProgramStaticEq;
+
+/** Offset 0x0A76 - Enable/Disable GEN4 Static EQ Phase1 programming
+ Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
+ Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 CpuPcieGen4ProgramStaticEq;
+
+/** Offset 0x0A77 - PCH Pm PME_B0_S5_DIS
+ When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
+ $EN_DIS
+**/
+ UINT8 PchPmPmeB0S5Dis;
+
+/** Offset 0x0A78 - PCIE IMR
+ Enables Isolated Memory Region for PCIe.
+ $EN_DIS
+**/
+ UINT8 PcieRpImrEnabled;
+
+/** Offset 0x0A79 - PCIE IMR port number
+ Selects PCIE root port number for IMR feature.
+**/
+ UINT8 PcieRpImrSelection;
+
+/** Offset 0x0A7A - PCH Pm Wol Enable Override
+ Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolEnableOverride;
+
+/** Offset 0x0A7B - PCH Pm Pcie Wake From DeepSx
+ Determine if enable PCIe to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmPcieWakeFromDeepSx;
+
+/** Offset 0x0A7C - PCH Pm WoW lan Enable
+ Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanEnable;
+
+/** Offset 0x0A7D - PCH Pm WoW lan DeepSx Enable
+ Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the
+ PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanDeepSxEnable;
+
+/** Offset 0x0A7E - PCH Pm Lan Wake From DeepSx
+ Determine if enable LAN to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmLanWakeFromDeepSx;
+
+/** Offset 0x0A7F - PCH Pm Deep Sx Pol
+ Deep Sx Policy.
+ $EN_DIS
+**/
+ UINT8 PchPmDeepSxPol;
+
+/** Offset 0x0A80 - PCH Pm Slp S3 Min Assert
+ SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
+**/
+ UINT8 PchPmSlpS3MinAssert;
+
+/** Offset 0x0A81 - PCH Pm Slp S4 Min Assert
+ SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
+**/
+ UINT8 PchPmSlpS4MinAssert;
+
+/** Offset 0x0A82 - PCH Pm Slp Sus Min Assert
+ SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
+**/
+ UINT8 PchPmSlpSusMinAssert;
+
+/** Offset 0x0A83 - PCH Pm Slp A Min Assert
+ SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
+**/
+ UINT8 PchPmSlpAMinAssert;
+
+/** Offset 0x0A84 - USB Overcurrent Override for DbC
+ This option overrides USB Over Current enablement state that USB OC will be disabled
+ after enabling this option. Enable when DbC is used to avoid signaling conflicts.
+ $EN_DIS
+**/
+ UINT8 PchEnableDbcObs;
+
+/** Offset 0x0A85 - PCH Pm Slp Strch Sus Up
+ Enable SLP_X Stretching After SUS Well Power Up.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpStrchSusUp;
+
+/** Offset 0x0A86 - PCH Pm Slp Lan Low Dc
+ Enable/Disable SLP_LAN# Low on DC Power.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpLanLowDc;
+
+/** Offset 0x0A87 - PCH Pm Pwr Btn Override Period
+ PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
+**/
+ UINT8 PchPmPwrBtnOverridePeriod;
+
+/** Offset 0x0A88 - PCH Pm Disable Dsx Ac Present Pulldown
+ When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableDsxAcPresentPulldown;
+
+/** Offset 0x0A89 - PCH Pm Disable Native Power Button
+ Power button native mode disable.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableNativePowerButton;
+
+/** Offset 0x0A8A - PCH Pm ME_WAKE_STS
+ Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmMeWakeSts;
+
+/** Offset 0x0A8B - PCH Pm WOL_OVR_WK_STS
+ Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolOvrWkSts;
+
+/** Offset 0x0A8C - PCH Pm Reset Power Cycle Duration
+ Could be customized in the unit of second. Please refer to EDS for all support settings.
+ 0 is default, 1 is 1 second, 2 is 2 seconds, ...
+**/
+ UINT8 PchPmPwrCycDur;
+
+/** Offset 0x0A8D - PCH Pm Pcie Pll Ssc
+ Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
+ BIOS override.
+**/
+ UINT8 PchPmPciePllSsc;
+
+/** Offset 0x0A8E - PCH Legacy IO Low Latency Enable
+ Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable
+ $EN_DIS
+**/
+ UINT8 PchLegacyIoLowLatency;
+
+/** Offset 0x0A8F - PCH Sata Pwr Opt Enable
+ SATA Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 SataPwrOptEnable;
+
+/** Offset 0x0A90 - PCH Sata eSATA Speed Limit
+ When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
+ $EN_DIS
+**/
+ UINT8 EsataSpeedLimit;
+
+/** Offset 0x0A91 - PCH Sata Speed Limit
+ Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
+**/
+ UINT8 SataSpeedLimit;
+
+/** Offset 0x0A92 - Enable SATA Port HotPlug
+ Enable SATA Port HotPlug.
+**/
+ UINT8 SataPortsHotPlug[8];
+
+/** Offset 0x0A9A - Enable SATA Port Interlock Sw
+ Enable SATA Port Interlock Sw.
+**/
+ UINT8 SataPortsInterlockSw[8];
+
+/** Offset 0x0AA2 - Enable SATA Port External
+ Enable SATA Port External.
+**/
+ UINT8 SataPortsExternal[8];
+
+/** Offset 0x0AAA - Enable SATA Port SpinUp
+ Enable the COMRESET initialization Sequence to the device.
+**/
+ UINT8 SataPortsSpinUp[8];
+
+/** Offset 0x0AB2 - Enable SATA Port Solid State Drive
+ 0: HDD; 1: SSD.
+**/
+ UINT8 SataPortsSolidStateDrive[8];
+
+/** Offset 0x0ABA - Enable SATA Port Enable Dito Config
+ Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
+**/
+ UINT8 SataPortsEnableDitoConfig[8];
+
+/** Offset 0x0AC2 - Enable SATA Port DmVal
+ DITO multiplier. Default is 15.
+**/
+ UINT8 SataPortsDmVal[8];
+
+/** Offset 0x0ACA - Enable SATA Port DmVal
+ DEVSLP Idle Timeout (DITO), Default is 625.
+**/
+ UINT16 SataPortsDitoVal[8];
+
+/** Offset 0x0ADA - Enable SATA Port ZpOdd
+ Support zero power ODD.
+**/
+ UINT8 SataPortsZpOdd[8];
+
+/** Offset 0x0AE2 - Enable SATA Port RxPolarity
+ Reverse RxPolarity.
+**/
+ UINT8 SataPortsRxPolarity[8];
+
+/** Offset 0x0AEA - PCH Sata Rst Raid Alternate Id
+ Enable RAID Alternate ID.
+ $EN_DIS
+**/
+ UINT8 SataRstRaidDeviceId;
+
+/** Offset 0x0AEB - PCH Sata Rst Raid0
+ RAID0.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid0;
+
+/** Offset 0x0AEC - PCH Sata Rst Raid1
+ RAID1.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid1;
+
+/** Offset 0x0AED - PCH Sata Rst Raid10
+ RAID10.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid10;
+
+/** Offset 0x0AEE - PCH Sata Rst Raid5
+ RAID5.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid5;
+
+/** Offset 0x0AEF - PCH Sata Rst Irrt
+ Intel Rapid Recovery Technology.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrt;
+
+/** Offset 0x0AF0 - PCH Sata Rst Orom Ui Banner
+ OROM UI and BANNER.
+ $EN_DIS
+**/
+ UINT8 SataRstOromUiBanner;
+
+/** Offset 0x0AF1 - PCH Sata Rst Orom Ui Delay
+ 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY).
+**/
+ UINT8 SataRstOromUiDelay;
+
+/** Offset 0x0AF2 - PCH Sata Rst Hdd Unlock
+ Indicates that the HDD password unlock in the OS is enabled.
+ $EN_DIS
+**/
+ UINT8 SataRstHddUnlock;
+
+/** Offset 0x0AF3 - PCH Sata Rst Led Locate
+ Indicates that the LED/SGPIO hardware is attached and ping to locate feature is
+ enabled on the OS.
+ $EN_DIS
+**/
+ UINT8 SataRstLedLocate;
+
+/** Offset 0x0AF4 - PCH Sata Rst Irrt Only
+ Allow only IRRT drives to span internal and external ports.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrtOnly;
+
+/** Offset 0x0AF5 - PCH Sata Rst Smart Storage
+ RST Smart Storage caching Bit.
+ $EN_DIS
+**/
+ UINT8 SataRstSmartStorage;
+
+/** Offset 0x0AF6 - PCH Sata Rst Pcie Storage Remap enable
+ Enable Intel RST for PCIe Storage remapping.
+**/
+ UINT8 SataRstPcieEnable[3];
+
+/** Offset 0x0AF9 - PCH Sata Rst Pcie Storage Port
+ Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
+**/
+ UINT8 SataRstPcieStoragePort[3];
+
+/** Offset 0x0AFC - PCH Sata Rst Pcie Device Reset Delay
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+**/
+ UINT8 SataRstPcieDeviceResetDelay[3];
+
+/** Offset 0x0AFF - UFS enable/disable
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+ $EN_DIS
+**/
+ UINT8 UfsEnable[2];
+
+/** Offset 0x0B01 - IEH Mode
+ Integrated Error Handler Mode, 0: Bypass, 1: Enable
+ 0: Bypass, 1:Enable
+**/
+ UINT8 IehMode;
+
+/** Offset 0x0B02 - PSF Tcc
+ Psf Tcc (Time Coordinated Computing) Enable will decrease psf transaction latency
+ by disable some psf power management features, 0: Disable, 1: Enable
+ $EN_DIS
+**/
+ UINT8 PsfTccEnable;
+
+/** Offset 0x0B03 - TCC Mode Default Flag
+ Variable to determine TCC mode default value, 0: Disable, 1: Enable
+ $EN_DIS
+**/
+ UINT8 TccModeInitFlag;
+
+/** Offset 0x0B04 - Tcc Tuning enable/disable
+ Tcc (Time Coordinated Computing) Tuning Enabled
+ $EN_DIS
+**/
+ UINT8 TccTuningEnable;
+
+/** Offset 0x0B05
+**/
+ UINT8 UnusedUpdSpace40[3];
+
+/** Offset 0x0B08 - Tcc Register File Base Address
+ Tcc (Time Coordinated Computing) Register File Base Address
+**/
+ UINT32 TccConfigBase;
+
+/** Offset 0x0B0C - Tcc Register File Size
+ Tcc (Time Coordinated Computing) Register File Size
+**/
+ UINT32 TccConfigSize;
+
+/** Offset 0x0B10 - Fusa Display Configuration
+ Fusa (Functional Safety) Enable Fusa Feature on Display, 0: Disable, 1: Enable
+ $EN_DIS
+**/
+ UINT8 DisplayFusaConfigEnable;
+
+/** Offset 0x0B11 - Fusa Graphics Configuration
+ Fusa (Functional Safety) Enable Fusa Feature on Graphics, 0: Disable, 1: Enable
+ $EN_DIS
+**/
+ UINT8 GraphicFusaConfigEnable;
+
+/** Offset 0x0B12 - Fusa Opio Configuration
+ Fusa (Functional Safety) Enable Fusa Feature on Opio, 0: Disable, 1: Enable
+ $EN_DIS
+**/
+ UINT8 OpioFusaConfigEnable;
+
+/** Offset 0x0B13 - Fusa Psf Configuration
+ Fusa (Functional Safety) Enable Fusa Feature on Psf, 0: Disable, 1: Enable
+ $EN_DIS
+**/
+ UINT8 PsfFusaConfigEnable;
+
+/** Offset 0x0B14 - Thermal Throttling Custimized T0Level Value
+ Custimized T0Level value.
+**/
+ UINT16 PchT0Level;
+
+/** Offset 0x0B16 - Thermal Throttling Custimized T1Level Value
+ Custimized T1Level value.
+**/
+ UINT16 PchT1Level;
+
+/** Offset 0x0B18 - Thermal Throttling Custimized T2Level Value
+ Custimized T2Level value.
+**/
+ UINT16 PchT2Level;
+
+/** Offset 0x0B1A - Enable The Thermal Throttle
+ Enable the thermal throttle function.
+ $EN_DIS
+**/
+ UINT8 PchTTEnable;
+
+/** Offset 0x0B1B - PMSync State 13
+ When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
+ at least T2 state.
+ $EN_DIS
+**/
+ UINT8 PchTTState13Enable;
+
+/** Offset 0x0B1C - Thermal Throttle Lock
+ Thermal Throttle Lock.
+ $EN_DIS
+**/
+ UINT8 PchTTLock;
+
+/** Offset 0x0B1D - Thermal Throttling Suggested Setting
+ Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 TTSuggestedSetting;
+
+/** Offset 0x0B1E - Enable PCH Cross Throttling
+ Enable/Disable PCH Cross Throttling
+ $EN_DIS
+**/
+ UINT8 TTCrossThrottling;
+
+/** Offset 0x0B1F - DMI Thermal Sensor Autonomous Width Enable
+ DMI Thermal Sensor Autonomous Width Enable.
+ $EN_DIS
+**/
+ UINT8 PchDmiTsawEn;
+
+/** Offset 0x0B20 - DMI Thermal Sensor Suggested Setting
+ DMT thermal sensor suggested representative values.
+ $EN_DIS
+**/
+ UINT8 DmiSuggestedSetting;
+
+/** Offset 0x0B21 - Thermal Sensor 0 Target Width
+ Thermal Sensor 0 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS0TW;
+
+/** Offset 0x0B22 - Thermal Sensor 1 Target Width
+ Thermal Sensor 1 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS1TW;
+
+/** Offset 0x0B23 - Thermal Sensor 2 Target Width
+ Thermal Sensor 2 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS2TW;
+
+/** Offset 0x0B24 - Thermal Sensor 3 Target Width
+ Thermal Sensor 3 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS3TW;
+
+/** Offset 0x0B25 - Port 0 T1 Multipler
+ Port 0 T1 Multipler.
+**/
+ UINT8 SataP0T1M;
+
+/** Offset 0x0B26 - Port 0 T2 Multipler
+ Port 0 T2 Multipler.
+**/
+ UINT8 SataP0T2M;
+
+/** Offset 0x0B27 - Port 0 T3 Multipler
+ Port 0 T3 Multipler.
+**/
+ UINT8 SataP0T3M;
+
+/** Offset 0x0B28 - Port 0 Tdispatch
+ Port 0 Tdispatch.
+**/
+ UINT8 SataP0TDisp;
+
+/** Offset 0x0B29 - Port 1 T1 Multipler
+ Port 1 T1 Multipler.
+**/
+ UINT8 SataP1T1M;
+
+/** Offset 0x0B2A - Port 1 T2 Multipler
+ Port 1 T2 Multipler.
+**/
+ UINT8 SataP1T2M;
+
+/** Offset 0x0B2B - Port 1 T3 Multipler
+ Port 1 T3 Multipler.
+**/
+ UINT8 SataP1T3M;
+
+/** Offset 0x0B2C - Port 1 Tdispatch
+ Port 1 Tdispatch.
+**/
+ UINT8 SataP1TDisp;
+
+/** Offset 0x0B2D - Port 0 Tinactive
+ Port 0 Tinactive.
+**/
+ UINT8 SataP0Tinact;
+
+/** Offset 0x0B2E - Port 0 Alternate Fast Init Tdispatch
+ Port 0 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP0TDispFinit;
+
+/** Offset 0x0B2F - Port 1 Tinactive
+ Port 1 Tinactive.
+**/
+ UINT8 SataP1Tinact;
+
+/** Offset 0x0B30 - Port 1 Alternate Fast Init Tdispatch
+ Port 1 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP1TDispFinit;
+
+/** Offset 0x0B31 - Sata Thermal Throttling Suggested Setting
+ Sata Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 SataThermalSuggestedSetting;
+
+/** Offset 0x0B32 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+ $EN_DIS
+**/
+ UINT8 PchMemoryThrottlingEnable;
+
+/** Offset 0x0B33 - Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPmsyncEnable[2];
+
+/** Offset 0x0B35 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryC0TransmitEnable[2];
+
+/** Offset 0x0B37 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPinSelection[2];
+
+/** Offset 0x0B39
+**/
+ UINT8 UnusedUpdSpace41;
+
+/** Offset 0x0B3A - Thermal Device Temperature
+ Decides the temperature.
+**/
+ UINT16 PchTemperatureHotLevel;
+
+/** Offset 0x0B3C - Enable xHCI Compliance Mode
+ Compliance Mode can be enabled for testing through this option but this is disabled
+ by default.
+ $EN_DIS
+**/
+ UINT8 PchEnableComplianceMode;
+
+/** Offset 0x0B3D - USB2 Port Over Current Pin
+ Describe the specific over current pin number of USB 2.0 Port N.
+**/
+ UINT8 Usb2OverCurrentPin[16];
+
+/** Offset 0x0B4D - USB3 Port Over Current Pin
+ Describe the specific over current pin number of USB 3.0 Port N.
+**/
+ UINT8 Usb3OverCurrentPin[10];
+
+/** Offset 0x0B57 - Enable xHCI LTR override
+ Enables override of recommended LTR values for xHCI
+ $EN_DIS
+**/
+ UINT8 PchUsbLtrOverrideEnable;
+
+/** Offset 0x0B58 - USB Clock Gating Enable
+ Enable or disable USB clock gating
+ $EN_DIS
+**/
+ UINT8 UsbClockGatingEnable;
+
+/** Offset 0x0B59 - USB Power Gating Enable
+ Enable or disable USB power gating
+ $EN_DIS
+**/
+ UINT8 UsbPowerGatingEnable;
+
+/** Offset 0x0B5A - USB3 LINK SPEED
+ Set USB3 LINK SPEED=0 for GEN2, Set USB3 LINK SPEED=1 for GEN1
+**/
+ UINT8 USB3LinkSpeed;
+
+/** Offset 0x0B5B
+**/
+ UINT8 UnusedUpdSpace42;
+
+/** Offset 0x0B5C - xHCI High Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting
+**/
+ UINT32 PchUsbLtrHighIdleTimeOverride;
+
+/** Offset 0x0B60 - xHCI Medium Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting
+**/
+ UINT32 PchUsbLtrMediumIdleTimeOverride;
+
+/** Offset 0x0B64 - xHCI Low Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting
+**/
+ UINT32 PchUsbLtrLowIdleTimeOverride;
+
+/** Offset 0x0B68 - Enable 8254 Static Clock Gating
+ Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
+ might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
+ legacy OS using 8254 timer. Also enable this while S0ix is enabled.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGating;
+
+/** Offset 0x0B69 - Enable 8254 Static Clock Gating On S3
+ This is only applicable when Enable8254ClockGating is disabled. FSP will do the
+ 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
+ avoids the SMI requirement for the programming.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGatingOnS3;
+
+/** Offset 0x0B6A - PCH Sata Rst Optane Memory
+ Optane Memory
+ $EN_DIS
+**/
+ UINT8 SataRstOptaneMemory;
+
+/** Offset 0x0B6B - PCH Sata Rst CPU Attached Storage
+ CPU Attached Storage
+ $EN_DIS
+**/
+ UINT8 SataRstCpuAttachedStorage;
+
+/** Offset 0x0B6C - Enable TCO timer.
+ When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
+ huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
+ emulation must be enabled, and WDAT table must not be exposed to the OS.
+ $EN_DIS
+**/
+ UINT8 EnableTcoTimer;
+
+/** Offset 0x0B6D - Enable Timed GPIO 0.
+ When FALSE, it disables Timed GPIO 0.
+ $EN_DIS
+**/
+ UINT8 EnableTimedGpio0;
+
+/** Offset 0x0B6E - Enable Timed GPIO 1.
+ When FALSE, it disables Timed GPIO 1.
+ $EN_DIS
+**/
+ UINT8 EnableTimedGpio1;
+
+/** Offset 0x0B6F - Enable VNN Voltage Raise.
+ When TRUE, it enable VNN Voltage Raise.
+ $EN_DIS
+**/
+ UINT8 EnableVnnVoltageRaise;
+
+/** Offset 0x0B70 - BgpdtHash[4]
+ BgpdtHash values
+**/
+ UINT64 BgpdtHash[4];
+
+/** Offset 0x0B90 - BiosGuardAttr
+ BiosGuardAttr default values
+**/
+ UINT32 BiosGuardAttr;
+
+/** Offset 0x0B94
+**/
+ UINT8 UnusedUpdSpace43[4];
+
+/** Offset 0x0B98 - BiosGuardModulePtr
+ BiosGuardModulePtr default values
+**/
+ UINT64 BiosGuardModulePtr;
+
+/** Offset 0x0BA0 - SendEcCmd
+ SendEcCmd function pointer. \n
+ @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
+ EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
+**/
+ UINT64 SendEcCmd;
+
+/** Offset 0x0BA8 - EcCmdProvisionEav
+ Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
+**/
+ UINT8 EcCmdProvisionEav;
+
+/** Offset 0x0BA9 - EcCmdLock
+ EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
+**/
+ UINT8 EcCmdLock;
+
+/** Offset 0x0BAA - Si Config CSM Flag.
+ Platform specific common policies that used by several silicon components. CSM status flag.
+ $EN_DIS
+**/
+ UINT8 SiCsmFlag;
+
+/** Offset 0x0BAB - Skip Ssid Programming.
+ When set to TRUE, silicon code will not do any SSID programming and platform code
+ needs to handle that by itself properly.
+ $EN_DIS
+**/
+ UINT8 SiSkipSsidProgramming;
+
+/** Offset 0x0BAC - Change Default SVID
+ Change the default SVID used in FSP to programming internal devices. This is only
+ valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiCustomizedSvid;
+
+/** Offset 0x0BAE - Change Default SSID
+ Change the default SSID used in FSP to programming internal devices. This is only
+ valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiCustomizedSsid;
+
+/** Offset 0x0BB0 - SVID SDID table Poniter.
+ The address of the table of SVID SDID to customize each SVID SDID entry. This is
+ only valid when SkipSsidProgramming is FALSE.
+**/
+ UINT32 SiSsidTablePtr;
+
+/** Offset 0x0BB4 - Number of ssid table.
+ SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr.
+ This is only valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiNumberOfSsidTableEntry;
+
+/** Offset 0x0BB6
+**/
+ UINT8 SiPostMemRsvd[16];
+
+/** Offset 0x0BC6 - SATA RST Interrupt Mode
+ Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
+ 0:Msix, 1:Msi, 2:Legacy
+**/
+ UINT8 SataRstInterrupt;
+
+/** Offset 0x0BC7 - ME Unconfig on RTC clear
+ 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
+ 2: Cmos is clear, status unkonwn. 3: Reserved
+ 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
+ is clear, 3: Reserved
+**/
+ UINT8 MeUnconfigOnRtcClear;
+
+/** Offset 0x0BC8 - Enable PS_ON.
+ PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
+ target that will be required by the California Energy Commission (CEC). When FALSE,
+ PS_ON is to be disabled.
+ $EN_DIS
+**/
+ UINT8 PsOnEnable;
+
+/** Offset 0x0BC9 - Pmc Cpu C10 Gate Pin Enable
+ Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
+ and VccSTG rails instead of SLP_S0# pin.
+ $EN_DIS
+**/
+ UINT8 PmcCpuC10GatePinEnable;
+
+/** Offset 0x0BCA - Pch Dmi Aspm Ctrl
+ ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
+**/
+ UINT8 PchDmiAspmCtrl;
+
+/** Offset 0x0BCB - PchDmiCwbEnable
+ Central Write Buffer feature configurable and disabled by default
+ $EN_DIS
+**/
+ UINT8 PchDmiCwbEnable;
+
+/** Offset 0x0BCC - OS IDLE Mode Enable
+ Enable/Disable OS Idle Mode
+ $EN_DIS
+**/
+ UINT8 PmcOsIdleEnable;
+
+/** Offset 0x0BCD - S0ix Auto-Demotion
+ Enable/Disable the Low Power Mode Auto-Demotion Host Control feature.
+ $EN_DIS
+**/
+ UINT8 PchS0ixAutoDemotion;
+
+/** Offset 0x0BCE - Global Reset TSC Enable
+ Enable/Disable PMC Global Reset Three Strike Counter feature. If enabled, PMC will
+ keep the platform in S5 after the third consecutive type 7 global reset occurs
+ during boot flow
+ $EN_DIS
+**/
+ UINT8 PmcGrTscEnable;
+
+/** Offset 0x0BCF - Latch Events C10 Exit
+ When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are
+ captured on C10 exit (instead of C10 entry which is default)
+ $EN_DIS
+**/
+ UINT8 PchPmLatchEventsC10Exit;
+
+/** Offset 0x0BD0 - PCIE Eq Ph3 Lane Param Cm
+ CPU_PCIE_EQ_LANE_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuPcieEqPh3LaneParamCm[32];
+
+/** Offset 0x0BF0 - PCIE Eq Ph3 Lane Param Cp
+ CPU_PCIE_EQ_LANE_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuPcieEqPh3LaneParamCp[32];
+
+/** Offset 0x0C10 - PCIE Hw Eq Gen3 CoeffList Cm
+ CPU_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuPcieHwEqGen3CoeffListCm[5];
+
+/** Offset 0x0C15 - PCIE Hw Eq Gen3 CoeffList Cp
+ CPU_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuPcieHwEqGen3CoeffListCp[5];
+
+/** Offset 0x0C1A - PCIE Hw Eq Gen4 CoeffList Cm
+ CPU_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuPcieHwEqGen4CoeffListCm[5];
+
+/** Offset 0x0C1F - PCIE Hw Eq Gen4 CoeffList Cp
+ CPU_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuPcieHwEqGen4CoeffListCp[5];
+
+/** Offset 0x0C24 - Gen3 Root port preset values per lane
+ Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 8 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen3RootPortPreset[20];
+
+/** Offset 0x0C38 - Pcie Gen4 Root port preset values per lane
+ Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 8 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen4RootPortPreset[20];
+
+/** Offset 0x0C4C - Pcie Gen3 End port preset values per lane
+ Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 7 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen3EndPointPreset[20];
+
+/** Offset 0x0C60 - Pcie Gen4 End port preset values per lane
+ Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 7 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen4EndPointPreset[20];
+
+/** Offset 0x0C74 - Pcie Gen3 End port Hint values per lane
+ Used for programming Pcie Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 CpuPcieGen3EndPointHint[20];
+
+/** Offset 0x0C88 - Pcie Gen4 End port Hint values per lane
+ Used for programming Pcie Gen4 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 CpuPcieGen4EndPointHint[20];
+
+/** Offset 0x0C9C - Skip Cpu Fia Programming
+ Skip Fia configuration and lock if enable. 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CpuPcieSkipCpuFiaProgramming;
+
+/** Offset 0x0C9D - PCIE Disable RootPort Clock Gating
+ Describes whether the PCI Express Clock Gating for each root port is enabled by
+ platform modules. 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CpuPcieDisableRootPortClockGating;
+
+/** Offset 0x0C9E - PCIE Disable RootPort Power Gating
+ Describes whether the PCI Express Power Gating for each root port is enabled by
+ platform modules. 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CpuPcieDisableRootPortPowerGating;
+
+/** Offset 0x0C9F - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 CpuPcieComplianceTestMode;
+
+/** Offset 0x0CA0 - PCIE Secure Register Lock
+ Describes whether Secure Register Lock is enaled or disabled. When it will be enbaled,
+ load CpuPcieRpSetSecuredRegisterLock recipe. 0: Disable(Default); 1: Enable
+ $EN_DIS
+**/
+ UINT8 CpuPcieSetSecuredRegisterLock;
+
+/** Offset 0x0CA1 - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 CpuPcieEnablePeerMemoryWrite;
+
+/** Offset 0x0CA2 - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 CpuPcieRpFunctionSwap;
+
+/** Offset 0x0CA3
+**/
+ UINT8 UnusedUpdSpace44;
+
+/** Offset 0x0CA4 - Pch PCIE device override table pointer
+ The PCIe device table is being used to override PCIe device ASPM settings. This
+ is a pointer points to a 32bit address. And it's only used in PostMem phase. Please
+ refer to CPU_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId
+ must be 0.
+**/
+ UINT32 CpuPcieDeviceOverrideTablePtr;
+
+/** Offset 0x0CA8 - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
+**/
+ UINT8 CpuPcieRpHotPlug[4];
+
+/** Offset 0x0CAC - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 CpuPcieRpPmSci[4];
+
+/** Offset 0x0CB0 - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
+**/
+ UINT8 CpuPcieRpTransmitterHalfSwing[4];
+
+/** Offset 0x0CB4 - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 CpuPcieRpAcsEnabled[4];
+
+/** Offset 0x0CB8 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 CpuPcieRpEnableCpm[4];
+
+/** Offset 0x0CBC - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 CpuPcieRpAdvancedErrorReporting[4];
+
+/** Offset 0x0CC0 - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 CpuPcieRpUnsupportedRequestReport[4];
+
+/** Offset 0x0CC4 - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 CpuPcieRpFatalErrorReport[4];
+
+/** Offset 0x0CC8 - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 CpuPcieRpNoFatalErrorReport[4];
+
+/** Offset 0x0CCC - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 CpuPcieRpCorrectableErrorReport[4];
+
+/** Offset 0x0CD0 - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnFatalError[4];
+
+/** Offset 0x0CD4 - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnNonFatalError[4];
+
+/** Offset 0x0CD8 - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnCorrectableError[4];
+
+/** Offset 0x0CDC - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 CpuPcieRpMaxPayload[4];
+
+/** Offset 0x0CE0 - DPC for PCIE RP Mask
+ Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpDpcEnabled[4];
+
+/** Offset 0x0CE4 - DPC Extensions PCIE RP Mask
+ Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit
+ for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpDpcExtensionsEnabled[4];
+
+/** Offset 0x0CE8 - PCH PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 CpuPcieRpSlotImplemented[4];
+
+/** Offset 0x0CEC - PCIE RP Gen3 Equalization Phase Method
+ PCIe Gen3 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 CpuPcieRpGen3EqPh3Method[4];
+
+/** Offset 0x0CF0 - PCIE RP Gen4 Equalization Phase Method
+ PCIe Gen4 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 CpuPcieRpGen4EqPh3Method[4];
+
+/** Offset 0x0CF4 - Phase3 RP Gen3 EQ enable
+ Phase3 Gen3 EQ enable. Disabled(0x0): Disable phase 3, Enabled(0x1): Enable phase
+ 3, Auto(0x2)(Default): Use the current default method
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 CpuPcieRpGen3EqPh3Enable[4];
+
+/** Offset 0x0CF8 - Phase3 RP Gen4 EQ enable
+ Phase3 Gen4 EQ enable. Disabled(0x0): Disable phase 3, Enabled(0x1): Enable phase
+ 3, Auto(0x2)(Default): Use the current default method
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 CpuPcieRpGen4EqPh3Enable[4];
+
+/** Offset 0x0CFC - Phase2-3 RP Gen3 EQ enable
+ Phase2-3 Gen3 EQ enable. Disabled(0x0): Disable Phase2-3, Enabled(0x1): Enable Phase2-3,
+ Auto(0x2)(Default): Use the current default method
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 CpuPcieRpGen3EqPh23Enable[4];
+
+/** Offset 0x0D00 - Phase2-3 RP Gen4 EQ enable
+ Phase2-3 Gen4 EQ enable. Disabled(0x0): Disable Phase2-3, Enabled(0x1): Enable Phase2-3,
+ Auto(0x2)(Default): Use the current default method
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 CpuPcieRpGen4EqPh23Enable[4];
+
+/** Offset 0x0D04 - PCET Timer
+ Preset/Coefficient Evaluation Timeout. See CPU_PCIE_PCET. Default is 0x4
+**/
+ UINT8 CpuPciePcetTimer[4];
+
+/** Offset 0x0D08 - Gen3 Preset/Coeffiecient List Count
+ Select Gen3 Hardware Autonomous Preset/Coefficient Count. See Gen3 CPU_PCIE_PRESETCOEFF_LIST.
+ Default is 0x3
+**/
+ UINT8 Gen3CpuPciePresetCoeffList[4];
+
+/** Offset 0x0D0C - Gen4 Preset/Coeffiecient List Count
+ Select Gen4 Hardware Autonomous Preset/Coefficient Count. See CPU_PCIE_PRESETCOEFF_LIST.
+ Default is 0x3
+**/
+ UINT8 Gen4CpuPciePresetCoeffList[4];
+
+/** Offset 0x0D10 - Presets/Coefficients Evaluation for Gen3
+ 8.0GT/s Training Sequence Wait Latency For Presets/Coefficients Evaluation. See
+ CPU_PCIE_PX8GTSWLPCE. Default is 0x3
+**/
+ UINT8 CpuPciePx8gtswlpce[4];
+
+/** Offset 0x0D14 - Presets/Coefficients Evaluation for Gen4
+ 16.0GT/s Training Sequence Wait Latency For Presets/Coefficients Evaluation. See
+ CPU_PCIE_PX16GTSWLPCE. Default is 0x4
+**/
+ UINT8 CpuPciePx16gtswlpce[4];
+
+/** Offset 0x0D18 - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 CpuPcieRpPhysicalSlotNumber[4];
+
+/** Offset 0x0D1C - PCIE RP Aspm
+ The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL). Default is
+ CpuPcieAspmAutoConfig.
+**/
+ UINT8 CpuPcieRpAspm[4];
+
+/** Offset 0x0D20 - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL).
+ Default is CpuPcieL1SubstatesDisabled.
+**/
+ UINT8 CpuPcieRpL1Substates[4];
+
+/** Offset 0x0D24 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 CpuPcieRpLtrEnable[4];
+
+/** Offset 0x0D28 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 CpuPcieRpLtrConfigLock[4];
+
+/** Offset 0x0D2C - PTM for PCIE RP Mask
+ Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpPtmEnabled[4];
+
+/** Offset 0x0D30 - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 CpuPcieRpDetectTimeoutMs[4];
+
+/** Offset 0x0D38 - VC for PCIE RP Mask
+ Enable/disable Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. One bit
+ for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpVcEnabled[4];
+
+/** Offset 0x0D3C - Force GT CLOS on LLC for Real Time Performance
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 GtClosEnable;
+
+/** Offset 0x0D3D - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate3UniqTranEnable[10];
+
+/** Offset 0x0D47 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default
+ = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate3UniqTran[10];
+
+/** Offset 0x0D51 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate2UniqTranEnable[10];
+
+/** Offset 0x0D5B - USB 3.0 TX Output Unique Transition Bit Scale for rate 2
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate2UniqTran[10];
+
+/** Offset 0x0D65 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate1UniqTranEnable[10];
+
+/** Offset 0x0D6F - USB 3.0 TX Output Unique Transition Bit Scale for rate 1
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate1UniqTran[10];
+
+/** Offset 0x0D79 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate0UniqTranEnable[10];
+
+/** Offset 0x0D83 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate0UniqTran[10];
+
+/** Offset 0x0D8D - Skip PAM regsiter lock
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ $EN_DIS
+**/
+ UINT8 SkipPamLock;
+
+/** Offset 0x0D8E - EDRAM Test Mode
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
+**/
+ UINT8 EdramTestMode;
+
+/** Offset 0x0D8F - Enable/Disable IGFX RenderStandby
+ Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
+ $EN_DIS
+**/
+ UINT8 RenderStandby;
+
+/** Offset 0x0D90 - Enable/Disable IGFX PmSupport
+ Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
+ $EN_DIS
+**/
+ UINT8 PmSupport;
+
+/** Offset 0x0D91 - Enable/Disable CdynmaxClamp
+ Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp
+ $EN_DIS
+**/
+ UINT8 CdynmaxClampEnable;
+
+/** Offset 0x0D92 - GT Frequency Limit
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+**/
+ UINT8 GtFreqMax;
+
+/** Offset 0x0D93 - Disable Turbo GT
+ 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
+ $EN_DIS
+**/
+ UINT8 DisableTurboGt;
+
+/** Offset 0x0D94 - Enable/Disable CdClock Init
+ Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
+ CD clock if not initialized by Gfx PEIM
+ $EN_DIS
+**/
+ UINT8 SkipCdClockInit;
+
+/** Offset 0x0D95
+**/
+ UINT8 UnusedUpdSpace45[3];
+
+/** Offset 0x0D98 - LogoPixelHeight Address
+ Address of LogoPixelHeight
+**/
+ UINT32 LogoPixelHeight;
+
+/** Offset 0x0D9C - LogoPixelWidth Address
+ Address of LogoPixelWidth
+**/
+ UINT32 LogoPixelWidth;
+
+/** Offset 0x0DA0 - SaPostMemTestRsvd
+ Reserved for SA Post-Mem Test
+ $EN_DIS
+**/
+ UINT8 SaPostMemTestRsvd[6];
+
+/** Offset 0x0DA6 - RSR feature
+ Enable or Disable RSR feature; 0: Disable; <b>1: Enable </b>
+ $EN_DIS
+**/
+ UINT8 EnableRsr;
+
+/** Offset 0x0DA7 - 1-Core Ratio Limit
+ 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal
+ to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83
+**/
+ UINT8 OneCoreRatioLimit;
+
+/** Offset 0x0DA8 - 2-Core Ratio Limit
+ 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 TwoCoreRatioLimit;
+
+/** Offset 0x0DA9 - 3-Core Ratio Limit
+ 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 ThreeCoreRatioLimit;
+
+/** Offset 0x0DAA - 4-Core Ratio Limit
+ 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 FourCoreRatioLimit;
+
+/** Offset 0x0DAB - Enable or Disable HWP
+ Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
+ 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 Hwp;
+
+/** Offset 0x0DAC - Hardware Duty Cycle Control
+ Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 HdcControl;
+
+/** Offset 0x0DAD - Package Long duration turbo mode time
+ Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds)
+ 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PowerLimit1Time;
+
+/** Offset 0x0DAE - Short Duration Turbo Mode
+ Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PowerLimit2;
+
+/** Offset 0x0DAF - Turbo settings Lock
+ Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 TurboPowerLimitLock;
+
+/** Offset 0x0DB0 - Package PL3 time window
+ Package PL3 time window range for this policy from 0 to 64ms
+**/
+ UINT8 PowerLimit3Time;
+
+/** Offset 0x0DB1 - Package PL3 Duty Cycle
+ Package PL3 Duty Cycle; Valid Range is 0 to 100
+**/
+ UINT8 PowerLimit3DutyCycle;
+
+/** Offset 0x0DB2 - Package PL3 Lock
+ Package PL3 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit3Lock;
+
+/** Offset 0x0DB3 - Package PL4 Lock
+ Package PL4 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit4Lock;
+
+/** Offset 0x0DB4 - TCC Activation Offset
+ TCC Activation Offset. Offset from factory set TCC activation temperature at which
+ the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
+ Temperature, in volts.For SKL Y SKU, the recommended default for this policy is
+ <b>10</b>, For all other SKUs the recommended default are <b>0</b>
+**/
+ UINT8 TccActivationOffset;
+
+/** Offset 0x0DB5 - Tcc Offset Clamp Enable/Disable
+ Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle
+ below P1.For SKL Y SKU, the recommended default for this policy is <b>1: Enabled</b>,
+ For all other SKUs the recommended default are <b>0: Disabled</b>.
+ $EN_DIS
+**/
+ UINT8 TccOffsetClamp;
+
+/** Offset 0x0DB6 - Tcc Offset Lock
+ Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature
+ target; <b>0: Disabled</b>; 1: Enabled.
+ $EN_DIS
+**/
+ UINT8 TccOffsetLock;
+
+/** Offset 0x0DB7 - Custom Ratio State Entries
+ The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
+ ratio table.Sets the number of custom P-states. At least 2 states must be present
+**/
+ UINT8 NumberOfEntries;
+
+/** Offset 0x0DB8 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128
+**/
+ UINT8 Custom1PowerLimit1Time;
+
+/** Offset 0x0DB9 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
+**/
+ UINT8 Custom1TurboActivationRatio;
+
+/** Offset 0x0DBA - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom1ConfigTdpControl;
+
+/** Offset 0x0DBB - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128
+**/
+ UINT8 Custom2PowerLimit1Time;
+
+/** Offset 0x0DBC - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
+**/
+ UINT8 Custom2TurboActivationRatio;
+
+/** Offset 0x0DBD - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom2ConfigTdpControl;
+
+/** Offset 0x0DBE - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128
+**/
+ UINT8 Custom3PowerLimit1Time;
+
+/** Offset 0x0DBF - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
+**/
+ UINT8 Custom3TurboActivationRatio;
+
+/** Offset 0x0DC0 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom3ConfigTdpControl;
+
+/** Offset 0x0DC1 - ConfigTdp mode settings Lock
+ Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ConfigTdpLock;
+
+/** Offset 0x0DC2 - Load Configurable TDP SSDT
+ Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ConfigTdpBios;
+
+/** Offset 0x0DC3 - PL1 Enable value
+ PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit1;
+
+/** Offset 0x0DC4 - PL1 timewindow
+ PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16
+ , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PsysPowerLimit1Time;
+
+/** Offset 0x0DC5 - PL2 Enable Value
+ PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit2;
+
+/** Offset 0x0DC6 - Enable or Disable MLC Streamer Prefetcher
+ Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MlcStreamerPrefetcher;
+
+/** Offset 0x0DC7 - Enable or Disable MLC Spatial Prefetcher
+ Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 MlcSpatialPrefetcher;
+
+/** Offset 0x0DC8 - Enable or Disable Monitor /MWAIT instructions
+ Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MonitorMwaitEnable;
+
+/** Offset 0x0DC9 - Enable or Disable initialization of machine check registers
+ Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MachineCheckEnable;
+
+/** Offset 0x0DCA - Check if FUSA is supported
+ Check if FUSA is supported; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 IsFusaSupported;
+
+/** Offset 0x0DCB - AP Idle Manner of waiting for SIPI
+ AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
+ 1: HALT loop, 2: MWAIT loop, 3: RUN loop
+**/
+ UINT8 ApIdleManner;
+
+/** Offset 0x0DCC - Control on Processor Trace output scheme
+ Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
+ 0: Single Range Output, 1: ToPA Output
+**/
+ UINT8 ProcessorTraceOutputScheme;
+
+/** Offset 0x0DCD - Enable or Disable Processor Trace feature
+ Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcessorTraceEnable;
+
+/** Offset 0x0DCE - Enable or Disable Intel SpeedStep Technology
+ Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Eist;
+
+/** Offset 0x0DCF - Enable or Disable Energy Efficient P-state
+ Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientPState;
+
+/** Offset 0x0DD0 - Enable or Disable Energy Efficient Turbo
+ Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientTurbo;
+
+/** Offset 0x0DD1 - Enable or Disable T states
+ Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TStates;
+
+/** Offset 0x0DD2 - Enable or Disable Bi-Directional PROCHOT#
+ Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 BiProcHot;
+
+/** Offset 0x0DD3 - Enable or Disable PROCHOT# signal being driven externally
+ Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DisableProcHotOut;
+
+/** Offset 0x0DD4 - Enable or Disable PROCHOT# Response
+ Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcHotResponse;
+
+/** Offset 0x0DD5 - Enable or Disable VR Thermal Alert
+ Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DisableVrThermalAlert;
+
+/** Offset 0x0DD6 - Enable or Disable Thermal Reporting
+ Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 EnableAllThermalFunctions;
+
+/** Offset 0x0DD7 - Enable or Disable Thermal Monitor
+ Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 ThermalMonitor;
+
+/** Offset 0x0DD8 - Enable or Disable CPU power states (C-states)
+ Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Cx;
+
+/** Offset 0x0DD9 - Configure C-State Configuration Lock
+ Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 PmgCstCfgCtrlLock;
+
+/** Offset 0x0DDA - Enable or Disable Enhanced C-states
+ Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1e;
+
+/** Offset 0x0DDB - Enable or Disable Package Cstate Demotion
+ Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateDemotion;
+
+/** Offset 0x0DDC - Enable or Disable Package Cstate UnDemotion
+ Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateUnDemotion;
+
+/** Offset 0x0DDD - Enable or Disable CState-Pre wake
+ Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CStatePreWake;
+
+/** Offset 0x0DDE - Enable or Disable TimedMwait Support.
+ Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 TimedMwait;
+
+/** Offset 0x0DDF - Enable or Disable IO to MWAIT redirection
+ Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CstCfgCtrIoMwaitRedirection;
+
+/** Offset 0x0DE0 - Set the Max Pkg Cstate
+ Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
+ C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
+ 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
+**/
+ UINT8 PkgCStateLimit;
+
+/** Offset 0x0DE1 - TimeUnit for C-State Latency Control0
+ TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl0TimeUnit;
+
+/** Offset 0x0DE2 - TimeUnit for C-State Latency Control1
+ TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl1TimeUnit;
+
+/** Offset 0x0DE3 - TimeUnit for C-State Latency Control2
+ TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl2TimeUnit;
+
+/** Offset 0x0DE4 - TimeUnit for C-State Latency Control3
+ TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl3TimeUnit;
+
+/** Offset 0x0DE5 - TimeUnit for C-State Latency Control4
+ Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl4TimeUnit;
+
+/** Offset 0x0DE6 - TimeUnit for C-State Latency Control5
+ TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl5TimeUnit;
+
+/** Offset 0x0DE7 - Interrupt Redirection Mode Select
+ Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7:
+ No change.
+**/
+ UINT8 PpmIrmSetting;
+
+/** Offset 0x0DE8 - Lock prochot configuration
+ Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ProcHotLock;
+
+/** Offset 0x0DE9 - Configuration for boot TDP selection
+ Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP
+ Up;0xFF : Deactivate
+**/
+ UINT8 ConfigTdpLevel;
+
+/** Offset 0x0DEA - Max P-State Ratio
+ Max P-State Ratio, Valid Range 0 to 0x7F
+**/
+ UINT8 MaxRatio;
+
+/** Offset 0x0DEB - P-state ratios for custom P-state table
+ P-state ratios for custom P-state table. NumberOfEntries has valid range between
+ 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
+ are configurable. Valid Range of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatio[40];
+
+/** Offset 0x0E13 - P-state ratios for max 16 version of custom P-state table
+ P-state ratios for max 16 version of custom P-state table. This table is used for
+ OS versions limited to a max of 16 P-States. If the first entry of this table is
+ 0, or if Number of Entries is 16 or less, then this table will be ignored, and
+ up to the top 16 values of the StateRatio table will be used instead. Valid Range
+ of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatioMax16[16];
+
+/** Offset 0x0E23
+**/
+ UINT8 UnusedUpdSpace46;
+
+/** Offset 0x0E24 - Platform Power Pmax
+ PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
+ Range 0-1024 Watts. Value of 800 = 100W
+**/
+ UINT16 PsysPmax;
+
+/** Offset 0x0E26 - Interrupt Response Time Limit of C-State LatencyContol1
+ Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl1Irtl;
+
+/** Offset 0x0E28 - Interrupt Response Time Limit of C-State LatencyContol2
+ Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl2Irtl;
+
+/** Offset 0x0E2A - Interrupt Response Time Limit of C-State LatencyContol3
+ Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl3Irtl;
+
+/** Offset 0x0E2C - Interrupt Response Time Limit of C-State LatencyContol4
+ Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl4Irtl;
+
+/** Offset 0x0E2E - Interrupt Response Time Limit of C-State LatencyContol5
+ Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl5Irtl;
+
+/** Offset 0x0E30 - Package Long duration turbo mode power limit
+ Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
+ Valid Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit1;
+
+/** Offset 0x0E34 - Package Short duration turbo mode power limit
+ Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit2Power;
+
+/** Offset 0x0E38 - Package PL3 power limit
+ Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit3;
+
+/** Offset 0x0E3C - Package PL4 power limit
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit4;
+
+/** Offset 0x0E40 - Tcc Offset Time Window for RATL
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 TccOffsetTimeWindowForRatl;
+
+/** Offset 0x0E44 - Short term Power Limit value for custom cTDP level 1
+ Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit1;
+
+/** Offset 0x0E48 - Long term Power Limit value for custom cTDP level 1
+ Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit2;
+
+/** Offset 0x0E4C - Short term Power Limit value for custom cTDP level 2
+ Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit1;
+
+/** Offset 0x0E50 - Long term Power Limit value for custom cTDP level 2
+ Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit2;
+
+/** Offset 0x0E54 - Short term Power Limit value for custom cTDP level 3
+ Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit1;
+
+/** Offset 0x0E58 - Long term Power Limit value for custom cTDP level 3
+ Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit2;
+
+/** Offset 0x0E5C - Platform PL1 power
+ Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit1Power;
+
+/** Offset 0x0E60 - Platform PL2 power
+ Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit2Power;
+
+/** Offset 0x0E64 - Race To Halt
+ Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
+ in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
+ through MSR 1FC bit 20)Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 RaceToHalt;
+
+/** Offset 0x0E65 - Set Three Strike Counter Disable
+ False (default): Three Strike counter will be incremented and True: Prevents Three
+ Strike counter from incrementing; <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 ThreeStrikeCounterDisable;
+
+/** Offset 0x0E66 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
+ Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 HwpInterruptControl;
+
+/** Offset 0x0E67 - 5-Core Ratio Limit
+ 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 FiveCoreRatioLimit;
+
+/** Offset 0x0E68 - 6-Core Ratio Limit
+ 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 SixCoreRatioLimit;
+
+/** Offset 0x0E69 - 7-Core Ratio Limit
+ 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 SevenCoreRatioLimit;
+
+/** Offset 0x0E6A - 8-Core Ratio Limit
+ 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 EightCoreRatioLimit;
+
+/** Offset 0x0E6B - Intel Turbo Boost Max Technology 3.0
+ Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
+ $EN_DIS
+**/
+ UINT8 EnableItbm;
+
+/** Offset 0x0E6C - Intel Turbo Boost Max Technology 3.0 Driver
+ Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 EnableItbmDriver;
+
+/** Offset 0x0E6D - Enable or Disable C1 Cstate Demotion
+ Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateAutoDemotion;
+
+/** Offset 0x0E6E - Enable or Disable C1 Cstate UnDemotion
+ Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateUnDemotion;
+
+/** Offset 0x0E6F - Minimum Ring ratio limit override
+ Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MinRingRatioLimit;
+
+/** Offset 0x0E70 - Maximum Ring ratio limit override
+ Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MaxRingRatioLimit;
+
+/** Offset 0x0E71 - Enable or Disable Per Core P State OS control
+ Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnablePerCorePState;
+
+/** Offset 0x0E72 - Enable or Disable HwP Autonomous Per Core P State OS control
+ Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1:
+ Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoPerCorePstate;
+
+/** Offset 0x0E73 - Enable or Disable HwP Autonomous EPP Grouping
+ Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoEppGrouping;
+
+/** Offset 0x0E74 - Enable or Disable EPB override over PECI
+ Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 EnableEpbPeciOverride;
+
+/** Offset 0x0E75 - Enable or Disable Fast MSR for IA32_HWP_REQUEST
+ Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable;<b> 1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableFastMsrHwpReq;
+
+/** Offset 0x0E76 - Enable Configurable TDP
+ Applies TDP initialization settings based on non-cTDP or cTDP.; 0: Applies to non-cTDP;
+ <b>1: Applies to cTDP</b>
+ $EN_DIS
+**/
+ UINT8 ApplyConfigTdp;
+
+/** Offset 0x0E77 - ReservedCpuPostMemTest
+ Reserved for CPU Post-Mem Test
+ $EN_DIS
+**/
+ UINT8 ReservedCpuPostMemTest[16];
+
+/** Offset 0x0E87
+**/
+ UINT8 SecurityPostMemRsvd[16];
+
+/** Offset 0x0E97 - D0I3 Setting for HECI Disable
+ Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
+ HECI devices
+ $EN_DIS
+**/
+ UINT8 DisableD0I3SettingForHeci;
+
+/** Offset 0x0E98 - Enable LOCKDOWN SMI
+ Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
+ $EN_DIS
+**/
+ UINT8 PchLockDownGlobalSmi;
+
+/** Offset 0x0E99 - Enable LOCKDOWN BIOS Interface
+ Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosInterface;
+
+/** Offset 0x0E9A - Unlock all GPIO pads
+ Force all GPIO pads to be unlocked for debug purpose.
+ $EN_DIS
+**/
+ UINT8 PchUnlockGpioPads;
+
+/** Offset 0x0E9B - PCH Unlock SideBand access
+ The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
+ 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
+ $EN_DIS
+**/
+ UINT8 PchSbAccessUnlock;
+
+/** Offset 0x0E9C - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxSnoopLatency[24];
+
+/** Offset 0x0ECC - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxNoSnoopLatency[24];
+
+/** Offset 0x0EFC - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMode[24];
+
+/** Offset 0x0F14 - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x0F2C - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 PcieRpSnoopLatencyOverrideValue[24];
+
+/** Offset 0x0F5C - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMode[24];
+
+/** Offset 0x0F74 - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x0F8C - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 PcieRpNonSnoopLatencyOverrideValue[24];
+
+/** Offset 0x0FBC - PCIE RP Slot Power Limit Scale
+ Specifies scale used for slot power limit value. Leave as 0 to set to default.
+**/
+ UINT8 PcieRpSlotPowerLimitScale[24];
+
+/** Offset 0x0FD4 - PCIE RP Slot Power Limit Value
+ Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
+**/
+ UINT16 PcieRpSlotPowerLimitValue[24];
+
+/** Offset 0x1004 - PCIE RP Enable Port8xh Decode
+ This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePort8xhDecode;
+
+/** Offset 0x1005 - PCIE Port8xh Decode Port Index
+ The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
+**/
+ UINT8 PchPciePort8xhDecodePortIndex;
+
+/** Offset 0x1006 - PCH Energy Reporting
+ Disable/Enable PCH to CPU energy report feature.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableEnergyReport;
+
+/** Offset 0x1007 - PCH Sata Test Mode
+ Allow entrance to the PCH SATA test modes.
+ $EN_DIS
+**/
+ UINT8 SataTestMode;
+
+/** Offset 0x1008 - PCH USB OverCurrent mapping lock enable
+ If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
+ that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
+ $EN_DIS
+**/
+ UINT8 PchXhciOcLock;
+
+/** Offset 0x1009 - Low Power Mode Enable/Disable config mask
+ Configure if respective S0i2/3 sub-states are to be supported. Each bit corresponds
+ to one sub-state (LPMx - BITx): LPM0-s0i2.0, LPM1-s0i2.1, LPM2-s0i2.2, LPM3-s0i3.0,
+ LPM4-s0i3.1, LPM5-s0i3.2, LPM6-s0i3.3, LPM7-s0i3.4.
+**/
+ UINT8 PmcLpmS0ixSubStateEnableMask;
+
+/** Offset 0x100A - Mctp Broadcast Cycle
+ Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 MctpBroadcastCycle;
+
+/** Offset 0x100B
+**/
+ UINT8 UnusedUpdSpace47[1];
+
+/** Offset 0x100C - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 CpuPcieRpLtrMaxSnoopLatency[4];
+
+/** Offset 0x1014 - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 CpuPcieRpLtrMaxNoSnoopLatency[4];
+
+/** Offset 0x101C - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 CpuPcieRpSnoopLatencyOverrideMode[4];
+
+/** Offset 0x1020 - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 CpuPcieRpSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x1024 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 CpuPcieRpSnoopLatencyOverrideValue[4];
+
+/** Offset 0x102C - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 CpuPcieRpNonSnoopLatencyOverrideMode[4];
+
+/** Offset 0x1030 - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 CpuPcieRpNonSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x1034 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 CpuPcieRpNonSnoopLatencyOverrideValue[4];
+
+/** Offset 0x103C - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 CpuPcieRpGen3Uptp[4];
+
+/** Offset 0x1040 - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 CpuPcieRpGen3Dptp[4];
+
+/** Offset 0x1044 - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 CpuPcieRpGen4Uptp[4];
+
+/** Offset 0x1048 - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 CpuPcieRpGen4Dptp[4];
+
+/** Offset 0x104C - Enable PSE JTAG debug option
+ Set if to enable JTAG debug feature for PSE. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseJtagEnabled;
+
+/** Offset 0x104D - Enable PSE JTAG pin option
+ This option is used to enable or disable PSE JTAG pin pad mode. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseJtagPinMux;
+
+/** Offset 0x104E - Enable PSE SHELL option
+ Set if to enable PSE Shell feature. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseShellEnabled;
+
+/** Offset 0x104F - Enable PSE ECLITE option
+ Set if to enable PSE Eclite feature. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseEcliteEnabled;
+
+/** Offset 0x1050 - Enable PSE OOB option
+ Set if to enable PSE OOB feature. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseOobEnabled;
+
+/** Offset 0x1051 - Enable CPU Temperature Read
+ Set to enable CPU Temperature Read feature. 0: Disable; 1: Enable.
+**/
+ UINT8 PchCpuTempSensorEnable;
+
+/** Offset 0x1052 - Enable PSE WoL option
+ Set if to enable PSE WoL feature. 0: Disable; 1: Enable.
+**/
+ UINT8 PchPseWoLEnabled;
+
+/** Offset 0x1053
+**/
+ UINT8 ReservedFspsUpd[13];
+} FSP_S_CONFIG;
+
+/** Fsp S UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSP_S_CONFIG FspsConfig;
+
+/** Offset 0x1060
+**/
+ UINT8 UnusedUpdSpace48[6];
+
+/** Offset 0x1066
+**/
+ UINT16 UpdTerminator;
+} FSPS_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FsptUpd.h new file mode 100644 index 0000000000..e66c68c031 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/FsptUpd.h @@ -0,0 +1,202 @@ +/** @file
+
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPTUPD_H__
+#define __FSPTUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+/** Fsp T Core UPD
+**/
+typedef struct {
+
+/** Offset 0x0020
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x0024
+**/
+ UINT32 MicrocodeRegionSize;
+
+/** Offset 0x0028
+**/
+ UINT32 CodeRegionBase;
+
+/** Offset 0x002C
+**/
+ UINT32 CodeRegionSize;
+
+/** Offset 0x0030
+**/
+ UINT8 Reserved[16];
+} FSPT_CORE_UPD;
+
+/** Fsp T Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - PcdSerialIoUartDebugEnable
+ Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP.
+ 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
+**/
+ UINT8 PcdSerialIoUartDebugEnable;
+
+/** Offset 0x0041 - PcdSerialIoUartNumber
+ Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
+ Core interface, it cannot be used for debug purpose.
+ 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
+**/
+ UINT8 PcdSerialIoUartNumber;
+
+/** Offset 0x0042 - PcdSerialIoUartMode - FSPT
+ Select SerialIo Uart Controller mode
+ 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
+ 4:SerialIoUartSkipInit
+**/
+ UINT8 PcdSerialIoUartMode;
+
+/** Offset 0x0043
+**/
+ UINT8 UnusedUpdSpace0;
+
+/** Offset 0x0044 - PcdSerialIoUartBaudRate - FSPT
+ Set default BaudRate Supported from 0 - default to 6000000
+**/
+ UINT32 PcdSerialIoUartBaudRate;
+
+/** Offset 0x0048 - Pci Express Base Address
+ Base address to be programmed for Pci Express
+**/
+ UINT64 PcdPciExpressBaseAddress;
+
+/** Offset 0x0050 - Pci Express Region Length
+ Region Length to be programmed for Pci Express
+**/
+ UINT32 PcdPciExpressRegionLength;
+
+/** Offset 0x0054 - PcdSerialIoUartParity - FSPT
+ Set default Parity.
+ 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 PcdSerialIoUartParity;
+
+/** Offset 0x0055 - PcdSerialIoUartDataBits - FSPT
+ Set default word length. 0: Default, 5,6,7,8
+**/
+ UINT8 PcdSerialIoUartDataBits;
+
+/** Offset 0x0056 - PcdSerialIoUartStopBits - FSPT
+ Set default stop bits.
+ 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
+**/
+ UINT8 PcdSerialIoUartStopBits;
+
+/** Offset 0x0057 - PcdSerialIoUartAutoFlow - FSPT
+ Enables UART hardware flow control, CTS and RTS lines.
+ 0: Disable, 1:Enable
+**/
+ UINT8 PcdSerialIoUartAutoFlow;
+
+/** Offset 0x0058 - PcdSerialIoUartRxPinMux - FSPT
+ Select RX pin muxing for SerialIo UART used for debug
+**/
+ UINT32 PcdSerialIoUartRxPinMux;
+
+/** Offset 0x005C - PcdSerialIoUartTxPinMux - FSPT
+ Select TX pin muxing for SerialIo UART used for debug
+**/
+ UINT32 PcdSerialIoUartTxPinMux;
+
+/** Offset 0x0060 - PcdSerialIoUartRtsPinMux - FSPT
+ Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
+ for possible values.
+**/
+ UINT32 PcdSerialIoUartRtsPinMux;
+
+/** Offset 0x0064 - PcdSerialIoUartCtsPinMux - FSPT
+ Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
+ for possible values.
+**/
+ UINT32 PcdSerialIoUartCtsPinMux;
+
+/** Offset 0x0068 - PcdSerialIoUartDebugMmioBase - FSPT
+ Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode
+ = SerialIoUartPci.
+**/
+ UINT32 PcdSerialIoUartDebugMmioBase;
+
+/** Offset 0x006C - PcdLpcUartDebugEnable
+ Enable to initialize LPC Uart device in FSP.
+ 0:Disable, 1:Enable
+**/
+ UINT8 PcdLpcUartDebugEnable;
+
+/** Offset 0x006D
+**/
+ UINT8 UnusedUpdSpace1[7];
+
+/** Offset 0x0074
+**/
+ UINT8 ReservedFsptUpd1[20];
+} FSP_T_CONFIG;
+
+/** Fsp T UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSPT_CORE_UPD FsptCoreUpd;
+
+/** Offset 0x0040
+**/
+ FSP_T_CONFIG FsptConfig;
+
+/** Offset 0x0088
+**/
+ UINT8 UnusedUpdSpace2[6];
+
+/** Offset 0x008E
+**/
+ UINT16 UpdTerminator;
+} FSPT_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/MemInfoHob.h new file mode 100644 index 0000000000..7c6ed2b27c --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/elkhartlake/MemInfoHob.h @@ -0,0 +1,252 @@ +/** @file
+ This file contains definitions required for creation of
+ Memory S3 Save data, Memory Info data and Memory Platform
+ data hobs.
+
+ @copyright
+ Copyright (c) 1999 - 2020, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License that accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+@par Specification Reference:
+**/
+#ifndef _MEM_INFO_HOB_H_
+#define _MEM_INFO_HOB_H_
+
+#include <Uefi/UefiMultiPhase.h>
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#pragma pack (push, 1)
+
+extern EFI_GUID gSiMemoryS3DataGuid;
+extern EFI_GUID gSiMemoryInfoDataGuid;
+extern EFI_GUID gSiMemoryPlatformDataGuid;
+
+#define MAX_TRACE_CACHE_TYPE 3
+
+#define MAX_NODE 1
+#define MAX_CH 2
+#define MAX_DIMM 2
+
+///
+/// Host reset states from MRC.
+///
+#define WARM_BOOT 2
+
+#define R_MC_CHNL_RANK_PRESENT 0x7C
+#define B_RANK0_PRS BIT0
+#define B_RANK1_PRS BIT1
+#define B_RANK2_PRS BIT4
+#define B_RANK3_PRS BIT5
+
+///
+/// Defines taken from MRC so avoid having to include MrcInterface.h
+///
+
+//
+// Matches MAX_SPD_SAVE define in MRC
+//
+#ifndef MAX_SPD_SAVE
+#define MAX_SPD_SAVE 29
+#endif
+
+//
+// MRC version description.
+//
+typedef struct {
+ UINT8 Major; ///< Major version number
+ UINT8 Minor; ///< Minor version number
+ UINT8 Rev; ///< Revision number
+ UINT8 Build; ///< Build number
+} SiMrcVersion;
+
+//
+// Matches MrcDimmSts enum in MRC
+//
+#ifndef DIMM_ENABLED
+#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected.
+#endif
+#ifndef DIMM_DISABLED
+#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence.
+#endif
+#ifndef DIMM_PRESENT
+#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used.
+#endif
+#ifndef DIMM_NOT_PRESENT
+#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair.
+#endif
+
+//
+// Matches MrcBootMode enum in MRC
+//
+#ifndef __MRC_BOOT_MODE__
+#define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h
+ #ifndef INT32_MAX
+ #define INT32_MAX (0x7FFFFFFF)
+ #endif //INT32_MAX
+typedef enum {
+ bmCold, ///< Cold boot
+ bmWarm, ///< Warm boot
+ bmS3, ///< S3 resume
+ bmFast, ///< Fast boot
+ MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value.
+ MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI.
+} MRC_BOOT_MODE;
+#endif //__MRC_BOOT_MODE__
+
+//
+// Matches MrcDdrType enum in MRC
+//
+#ifndef MRC_DDR_TYPE_DDR4
+#define MRC_DDR_TYPE_DDR4 0
+#endif
+#ifndef MRC_DDR_TYPE_DDR3
+#define MRC_DDR_TYPE_DDR3 1
+#endif
+#ifndef MRC_DDR_TYPE_LPDDR3
+#define MRC_DDR_TYPE_LPDDR3 2
+#endif
+#ifndef MRC_DDR_TYPE_UNKNOWN
+#define MRC_DDR_TYPE_UNKNOWN 3
+#endif
+
+#define MAX_PROFILE_NUM 4 // number of memory profiles supported
+#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported
+
+//
+// DIMM timings
+//
+typedef struct {
+ UINT32 tCK; ///< Memory cycle time, in femtoseconds.
+ UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode.
+ UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency.
+ UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time.
+ UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time.
+ UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time.
+ UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time.
+ UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval.
+ UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time.
+ UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks.
+ UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time.
+ UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups.
+ UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups.
+ UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time.
+ UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time.
+ UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time.
+ UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups.
+ UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups.
+ UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group.
+} MRC_CH_TIMING;
+
+///
+/// Memory SMBIOS & OC Memory Data Hob
+///
+typedef struct {
+ UINT8 Status; ///< See MrcDimmStatus for the definition of this field.
+ UINT8 DimmId;
+ UINT32 DimmCapacity; ///< DIMM size in MBytes.
+ UINT16 MfgId;
+ UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes
+ UINT8 RankInDimm; ///< The number of ranks in this DIMM.
+ UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation.
+ UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation.
+ UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation.
+ UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation.
+ UINT16 Speed; ///< The maximum capable speed of the device, in MHz
+ UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation.
+} DIMM_INFO;
+
+typedef struct {
+ UINT8 Status; ///< Indicates whether this channel should be used.
+ UINT8 ChannelId;
+ UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel.
+ MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values.
+ DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics.
+} CHANNEL_INFO;
+
+typedef struct {
+ UINT8 Status; ///< Indicates whether this controller should be used.
+ UINT16 DeviceId; ///< The PCI device id of this memory controller.
+ UINT8 RevisionId; ///< The PCI revision id of this memory controller.
+ UINT8 ChannelCount; ///< Number of valid channels that exist on the controller.
+ CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions.
+} CONTROLLER_INFO;
+
+typedef struct {
+ UINT64 BaseAddress; ///< Trace Base Address
+ UINT64 TotalSize; ///< Total Trace Region of Same Cache type
+ UINT8 CacheType; ///< Trace Cache Type
+ UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code
+ UINT8 Rsvd[2];
+} PSMI_MEM_INFO;
+
+typedef struct {
+ UINT8 Revision;
+ UINT16 DataWidth; ///< Data width, in bits, of this memory device
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.18.2 and Table 75
+ **/
+ UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3
+ UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz)
+ UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz)
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.17.3 and Table 72
+ **/
+ UINT8 ErrorCorrectionType;
+
+ SiMrcVersion Version;
+ BOOLEAN EccSupport;
+ UINT8 MemoryProfile;
+ UINT32 TotalPhysicalMemorySize;
+ UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist.
+ UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs.
+ UINT8 Ratio;
+ UINT8 RefClk;
+ UINT32 VddVoltage[MAX_PROFILE_NUM];
+ CONTROLLER_INFO Controller[MAX_NODE];
+} MEMORY_INFO_DATA_HOB;
+
+/**
+ Memory Platform Data Hob
+
+ <b>Revision 1:</b>
+ - Initial version.
+ <b>Revision 2:</b>
+ - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields
+**/
+typedef struct {
+ UINT8 Revision;
+ UINT8 Reserved[3];
+ UINT32 BootMode;
+ UINT32 TsegSize;
+ UINT32 TsegBase;
+ UINT32 PrmrrSize;
+ UINT64 PrmrrBase;
+ UINT32 PramSize;
+ UINT64 PramBase;
+ UINT64 DismLimit;
+ UINT64 DismBase;
+ UINT32 GttBase;
+ UINT32 MmioSize;
+ UINT32 PciEBaseAddress;
+ PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE];
+} MEMORY_PLATFORM_DATA;
+
+typedef struct {
+ EFI_HOB_GUID_TYPE EfiHobGuidType;
+ MEMORY_PLATFORM_DATA Data;
+ UINT8 *Buffer;
+} MEMORY_PLATFORM_DATA_HOB;
+
+#pragma pack (pop)
+
+#endif // _MEM_INFO_HOB_H_
|